2 * w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
4 * Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
5 * Philip Edelbrock <phil@netroedge.com>,
6 * and Mark Studebaker <mdsxyz123@yahoo.com>
7 * Copyright (c) 2007 - 2008 Jean Delvare <khali@linux-fr.org>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 * Supports following chips:
27 * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
28 * as99127f 7 3 0 3 0x31 0x12c3 yes no
29 * as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
30 * w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
31 * w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
32 * w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
36 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
38 #include <linux/module.h>
39 #include <linux/init.h>
40 #include <linux/slab.h>
41 #include <linux/jiffies.h>
42 #include <linux/i2c.h>
43 #include <linux/hwmon.h>
44 #include <linux/hwmon-vid.h>
45 #include <linux/hwmon-sysfs.h>
46 #include <linux/sysfs.h>
47 #include <linux/err.h>
48 #include <linux/mutex.h>
51 #include <linux/platform_device.h>
52 #include <linux/ioport.h>
58 /* Addresses to scan */
59 static const unsigned short normal_i2c
[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
60 0x2e, 0x2f, I2C_CLIENT_END
};
62 enum chips
{ w83781d
, w83782d
, w83783s
, as99127f
};
64 /* Insmod parameters */
65 static unsigned short force_subclients
[4];
66 module_param_array(force_subclients
, short, NULL
, 0);
67 MODULE_PARM_DESC(force_subclients
,
68 "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
71 module_param(reset
, bool, 0);
72 MODULE_PARM_DESC(reset
, "Set to one to reset chip on load");
75 module_param(init
, bool, 0);
76 MODULE_PARM_DESC(init
, "Set to zero to bypass chip initialization");
78 /* Constants specified below */
80 /* Length of ISA address segment */
81 #define W83781D_EXTENT 8
83 /* Where are the ISA address/data registers relative to the base address */
84 #define W83781D_ADDR_REG_OFFSET 5
85 #define W83781D_DATA_REG_OFFSET 6
87 /* The device registers */
88 /* in nr from 0 to 8 */
89 #define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
90 (0x554 + (((nr) - 7) * 2)))
91 #define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
92 (0x555 + (((nr) - 7) * 2)))
93 #define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \
96 /* fan nr from 0 to 2 */
97 #define W83781D_REG_FAN_MIN(nr) (0x3b + (nr))
98 #define W83781D_REG_FAN(nr) (0x28 + (nr))
100 #define W83781D_REG_BANK 0x4E
101 #define W83781D_REG_TEMP2_CONFIG 0x152
102 #define W83781D_REG_TEMP3_CONFIG 0x252
103 /* temp nr from 1 to 3 */
104 #define W83781D_REG_TEMP(nr) ((nr == 3) ? (0x0250) : \
105 ((nr == 2) ? (0x0150) : \
107 #define W83781D_REG_TEMP_HYST(nr) ((nr == 3) ? (0x253) : \
108 ((nr == 2) ? (0x153) : \
110 #define W83781D_REG_TEMP_OVER(nr) ((nr == 3) ? (0x255) : \
111 ((nr == 2) ? (0x155) : \
114 #define W83781D_REG_CONFIG 0x40
116 /* Interrupt status (W83781D, AS99127F) */
117 #define W83781D_REG_ALARM1 0x41
118 #define W83781D_REG_ALARM2 0x42
120 /* Real-time status (W83782D, W83783S) */
121 #define W83782D_REG_ALARM1 0x459
122 #define W83782D_REG_ALARM2 0x45A
123 #define W83782D_REG_ALARM3 0x45B
125 #define W83781D_REG_BEEP_CONFIG 0x4D
126 #define W83781D_REG_BEEP_INTS1 0x56
127 #define W83781D_REG_BEEP_INTS2 0x57
128 #define W83781D_REG_BEEP_INTS3 0x453 /* not on W83781D */
130 #define W83781D_REG_VID_FANDIV 0x47
132 #define W83781D_REG_CHIPID 0x49
133 #define W83781D_REG_WCHIPID 0x58
134 #define W83781D_REG_CHIPMAN 0x4F
135 #define W83781D_REG_PIN 0x4B
138 #define W83781D_REG_VBAT 0x5D
140 /* PWM 782D (1-4) and 783S (1-2) only */
141 static const u8 W83781D_REG_PWM
[] = { 0x5B, 0x5A, 0x5E, 0x5F };
142 #define W83781D_REG_PWMCLK12 0x5C
143 #define W83781D_REG_PWMCLK34 0x45C
145 #define W83781D_REG_I2C_ADDR 0x48
146 #define W83781D_REG_I2C_SUBADDR 0x4A
149 * The following are undocumented in the data sheets however we
150 * received the information in an email from Winbond tech support
152 /* Sensor selection - not on 781d */
153 #define W83781D_REG_SCFG1 0x5D
154 static const u8 BIT_SCFG1
[] = { 0x02, 0x04, 0x08 };
156 #define W83781D_REG_SCFG2 0x59
157 static const u8 BIT_SCFG2
[] = { 0x10, 0x20, 0x40 };
159 #define W83781D_DEFAULT_BETA 3435
162 #define IN_TO_REG(val) clamp_val(((val) + 8) / 16, 0, 255)
163 #define IN_FROM_REG(val) ((val) * 16)
166 FAN_TO_REG(long rpm
, int div
)
170 rpm
= clamp_val(rpm
, 1, 1000000);
171 return clamp_val((1350000 + rpm
* div
/ 2) / (rpm
* div
), 1, 254);
175 FAN_FROM_REG(u8 val
, int div
)
181 return 1350000 / (val
* div
);
184 #define TEMP_TO_REG(val) clamp_val((val) / 1000, -127, 128)
185 #define TEMP_FROM_REG(val) ((val) * 1000)
187 #define BEEP_MASK_FROM_REG(val, type) ((type) == as99127f ? \
188 (~(val)) & 0x7fff : (val) & 0xff7fff)
189 #define BEEP_MASK_TO_REG(val, type) ((type) == as99127f ? \
190 (~(val)) & 0x7fff : (val) & 0xff7fff)
192 #define DIV_FROM_REG(val) (1 << (val))
195 DIV_TO_REG(long val
, enum chips type
)
198 val
= clamp_val(val
, 1,
199 ((type
== w83781d
|| type
== as99127f
) ? 8 : 128)) >> 1;
200 for (i
= 0; i
< 7; i
++) {
208 struct w83781d_data
{
209 struct i2c_client
*client
;
210 struct device
*hwmon_dev
;
214 /* For ISA device only */
218 struct mutex update_lock
;
219 char valid
; /* !=0 if following fields are valid */
220 unsigned long last_updated
; /* In jiffies */
222 struct i2c_client
*lm75
[2]; /* for secondary I2C addresses */
223 /* array of 2 pointers to subclients */
225 u8 in
[9]; /* Register value - 8 & 9 for 782D only */
226 u8 in_max
[9]; /* Register value - 8 & 9 for 782D only */
227 u8 in_min
[9]; /* Register value - 8 & 9 for 782D only */
228 u8 fan
[3]; /* Register value */
229 u8 fan_min
[3]; /* Register value */
230 s8 temp
; /* Register value */
231 s8 temp_max
; /* Register value */
232 s8 temp_max_hyst
; /* Register value */
233 u16 temp_add
[2]; /* Register value */
234 u16 temp_max_add
[2]; /* Register value */
235 u16 temp_max_hyst_add
[2]; /* Register value */
236 u8 fan_div
[3]; /* Register encoding, shifted right */
237 u8 vid
; /* Register encoding, combined */
238 u32 alarms
; /* Register encoding, combined */
239 u32 beep_mask
; /* Register encoding, combined */
240 u8 pwm
[4]; /* Register value */
241 u8 pwm2_enable
; /* Boolean */
244 * 1 = pentium diode; 2 = 3904 diode;
250 static struct w83781d_data
*w83781d_data_if_isa(void);
251 static int w83781d_alias_detect(struct i2c_client
*client
, u8 chipid
);
253 static int w83781d_read_value(struct w83781d_data
*data
, u16 reg
);
254 static int w83781d_write_value(struct w83781d_data
*data
, u16 reg
, u16 value
);
255 static struct w83781d_data
*w83781d_update_device(struct device
*dev
);
256 static void w83781d_init_device(struct device
*dev
);
258 /* following are the sysfs callback functions */
259 #define show_in_reg(reg) \
260 static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
263 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
264 struct w83781d_data *data = w83781d_update_device(dev); \
265 return sprintf(buf, "%ld\n", \
266 (long)IN_FROM_REG(data->reg[attr->index])); \
272 #define store_in_reg(REG, reg) \
273 static ssize_t store_in_##reg(struct device *dev, struct device_attribute \
274 *da, const char *buf, size_t count) \
276 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
277 struct w83781d_data *data = dev_get_drvdata(dev); \
278 int nr = attr->index; \
280 int err = kstrtoul(buf, 10, &val); \
283 mutex_lock(&data->update_lock); \
284 data->in_##reg[nr] = IN_TO_REG(val); \
285 w83781d_write_value(data, W83781D_REG_IN_##REG(nr), \
286 data->in_##reg[nr]); \
288 mutex_unlock(&data->update_lock); \
291 store_in_reg(MIN
, min
);
292 store_in_reg(MAX
, max
);
294 #define sysfs_in_offsets(offset) \
295 static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
296 show_in, NULL, offset); \
297 static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
298 show_in_min, store_in_min, offset); \
299 static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
300 show_in_max, store_in_max, offset)
312 #define show_fan_reg(reg) \
313 static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
316 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
317 struct w83781d_data *data = w83781d_update_device(dev); \
318 return sprintf(buf, "%ld\n", \
319 FAN_FROM_REG(data->reg[attr->index], \
320 DIV_FROM_REG(data->fan_div[attr->index]))); \
323 show_fan_reg(fan_min
);
326 store_fan_min(struct device
*dev
, struct device_attribute
*da
,
327 const char *buf
, size_t count
)
329 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
330 struct w83781d_data
*data
= dev_get_drvdata(dev
);
331 int nr
= attr
->index
;
335 err
= kstrtoul(buf
, 10, &val
);
339 mutex_lock(&data
->update_lock
);
341 FAN_TO_REG(val
, DIV_FROM_REG(data
->fan_div
[nr
]));
342 w83781d_write_value(data
, W83781D_REG_FAN_MIN(nr
),
345 mutex_unlock(&data
->update_lock
);
349 static SENSOR_DEVICE_ATTR(fan1_input
, S_IRUGO
, show_fan
, NULL
, 0);
350 static SENSOR_DEVICE_ATTR(fan1_min
, S_IRUGO
| S_IWUSR
,
351 show_fan_min
, store_fan_min
, 0);
352 static SENSOR_DEVICE_ATTR(fan2_input
, S_IRUGO
, show_fan
, NULL
, 1);
353 static SENSOR_DEVICE_ATTR(fan2_min
, S_IRUGO
| S_IWUSR
,
354 show_fan_min
, store_fan_min
, 1);
355 static SENSOR_DEVICE_ATTR(fan3_input
, S_IRUGO
, show_fan
, NULL
, 2);
356 static SENSOR_DEVICE_ATTR(fan3_min
, S_IRUGO
| S_IWUSR
,
357 show_fan_min
, store_fan_min
, 2);
359 #define show_temp_reg(reg) \
360 static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
363 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
364 struct w83781d_data *data = w83781d_update_device(dev); \
365 int nr = attr->index; \
366 if (nr >= 2) { /* TEMP2 and TEMP3 */ \
367 return sprintf(buf, "%d\n", \
368 LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
369 } else { /* TEMP1 */ \
370 return sprintf(buf, "%ld\n", (long)TEMP_FROM_REG(data->reg)); \
374 show_temp_reg(temp_max
);
375 show_temp_reg(temp_max_hyst
);
377 #define store_temp_reg(REG, reg) \
378 static ssize_t store_temp_##reg(struct device *dev, \
379 struct device_attribute *da, const char *buf, size_t count) \
381 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
382 struct w83781d_data *data = dev_get_drvdata(dev); \
383 int nr = attr->index; \
385 int err = kstrtol(buf, 10, &val); \
388 mutex_lock(&data->update_lock); \
390 if (nr >= 2) { /* TEMP2 and TEMP3 */ \
391 data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
392 w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
393 data->temp_##reg##_add[nr-2]); \
394 } else { /* TEMP1 */ \
395 data->temp_##reg = TEMP_TO_REG(val); \
396 w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
400 mutex_unlock(&data->update_lock); \
403 store_temp_reg(OVER
, max
);
404 store_temp_reg(HYST
, max_hyst
);
406 #define sysfs_temp_offsets(offset) \
407 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
408 show_temp, NULL, offset); \
409 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
410 show_temp_max, store_temp_max, offset); \
411 static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
412 show_temp_max_hyst, store_temp_max_hyst, offset);
414 sysfs_temp_offsets(1);
415 sysfs_temp_offsets(2);
416 sysfs_temp_offsets(3);
419 show_vid_reg(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
421 struct w83781d_data
*data
= w83781d_update_device(dev
);
422 return sprintf(buf
, "%ld\n", (long) vid_from_reg(data
->vid
, data
->vrm
));
425 static DEVICE_ATTR(cpu0_vid
, S_IRUGO
, show_vid_reg
, NULL
);
428 show_vrm_reg(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
430 struct w83781d_data
*data
= dev_get_drvdata(dev
);
431 return sprintf(buf
, "%ld\n", (long) data
->vrm
);
435 store_vrm_reg(struct device
*dev
, struct device_attribute
*attr
,
436 const char *buf
, size_t count
)
438 struct w83781d_data
*data
= dev_get_drvdata(dev
);
442 err
= kstrtoul(buf
, 10, &val
);
445 data
->vrm
= clamp_val(val
, 0, 255);
450 static DEVICE_ATTR(vrm
, S_IRUGO
| S_IWUSR
, show_vrm_reg
, store_vrm_reg
);
453 show_alarms_reg(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
455 struct w83781d_data
*data
= w83781d_update_device(dev
);
456 return sprintf(buf
, "%u\n", data
->alarms
);
459 static DEVICE_ATTR(alarms
, S_IRUGO
, show_alarms_reg
, NULL
);
461 static ssize_t
show_alarm(struct device
*dev
, struct device_attribute
*attr
,
464 struct w83781d_data
*data
= w83781d_update_device(dev
);
465 int bitnr
= to_sensor_dev_attr(attr
)->index
;
466 return sprintf(buf
, "%u\n", (data
->alarms
>> bitnr
) & 1);
469 /* The W83781D has a single alarm bit for temp2 and temp3 */
470 static ssize_t
show_temp3_alarm(struct device
*dev
,
471 struct device_attribute
*attr
, char *buf
)
473 struct w83781d_data
*data
= w83781d_update_device(dev
);
474 int bitnr
= (data
->type
== w83781d
) ? 5 : 13;
475 return sprintf(buf
, "%u\n", (data
->alarms
>> bitnr
) & 1);
478 static SENSOR_DEVICE_ATTR(in0_alarm
, S_IRUGO
, show_alarm
, NULL
, 0);
479 static SENSOR_DEVICE_ATTR(in1_alarm
, S_IRUGO
, show_alarm
, NULL
, 1);
480 static SENSOR_DEVICE_ATTR(in2_alarm
, S_IRUGO
, show_alarm
, NULL
, 2);
481 static SENSOR_DEVICE_ATTR(in3_alarm
, S_IRUGO
, show_alarm
, NULL
, 3);
482 static SENSOR_DEVICE_ATTR(in4_alarm
, S_IRUGO
, show_alarm
, NULL
, 8);
483 static SENSOR_DEVICE_ATTR(in5_alarm
, S_IRUGO
, show_alarm
, NULL
, 9);
484 static SENSOR_DEVICE_ATTR(in6_alarm
, S_IRUGO
, show_alarm
, NULL
, 10);
485 static SENSOR_DEVICE_ATTR(in7_alarm
, S_IRUGO
, show_alarm
, NULL
, 16);
486 static SENSOR_DEVICE_ATTR(in8_alarm
, S_IRUGO
, show_alarm
, NULL
, 17);
487 static SENSOR_DEVICE_ATTR(fan1_alarm
, S_IRUGO
, show_alarm
, NULL
, 6);
488 static SENSOR_DEVICE_ATTR(fan2_alarm
, S_IRUGO
, show_alarm
, NULL
, 7);
489 static SENSOR_DEVICE_ATTR(fan3_alarm
, S_IRUGO
, show_alarm
, NULL
, 11);
490 static SENSOR_DEVICE_ATTR(temp1_alarm
, S_IRUGO
, show_alarm
, NULL
, 4);
491 static SENSOR_DEVICE_ATTR(temp2_alarm
, S_IRUGO
, show_alarm
, NULL
, 5);
492 static SENSOR_DEVICE_ATTR(temp3_alarm
, S_IRUGO
, show_temp3_alarm
, NULL
, 0);
494 static ssize_t
show_beep_mask(struct device
*dev
,
495 struct device_attribute
*attr
, char *buf
)
497 struct w83781d_data
*data
= w83781d_update_device(dev
);
498 return sprintf(buf
, "%ld\n",
499 (long)BEEP_MASK_FROM_REG(data
->beep_mask
, data
->type
));
503 store_beep_mask(struct device
*dev
, struct device_attribute
*attr
,
504 const char *buf
, size_t count
)
506 struct w83781d_data
*data
= dev_get_drvdata(dev
);
510 err
= kstrtoul(buf
, 10, &val
);
514 mutex_lock(&data
->update_lock
);
515 data
->beep_mask
&= 0x8000; /* preserve beep enable */
516 data
->beep_mask
|= BEEP_MASK_TO_REG(val
, data
->type
);
517 w83781d_write_value(data
, W83781D_REG_BEEP_INTS1
,
518 data
->beep_mask
& 0xff);
519 w83781d_write_value(data
, W83781D_REG_BEEP_INTS2
,
520 (data
->beep_mask
>> 8) & 0xff);
521 if (data
->type
!= w83781d
&& data
->type
!= as99127f
) {
522 w83781d_write_value(data
, W83781D_REG_BEEP_INTS3
,
523 ((data
->beep_mask
) >> 16) & 0xff);
525 mutex_unlock(&data
->update_lock
);
530 static DEVICE_ATTR(beep_mask
, S_IRUGO
| S_IWUSR
,
531 show_beep_mask
, store_beep_mask
);
533 static ssize_t
show_beep(struct device
*dev
, struct device_attribute
*attr
,
536 struct w83781d_data
*data
= w83781d_update_device(dev
);
537 int bitnr
= to_sensor_dev_attr(attr
)->index
;
538 return sprintf(buf
, "%u\n", (data
->beep_mask
>> bitnr
) & 1);
542 store_beep(struct device
*dev
, struct device_attribute
*attr
,
543 const char *buf
, size_t count
)
545 struct w83781d_data
*data
= dev_get_drvdata(dev
);
546 int bitnr
= to_sensor_dev_attr(attr
)->index
;
551 err
= kstrtoul(buf
, 10, &bit
);
558 mutex_lock(&data
->update_lock
);
560 data
->beep_mask
|= (1 << bitnr
);
562 data
->beep_mask
&= ~(1 << bitnr
);
565 reg
= w83781d_read_value(data
, W83781D_REG_BEEP_INTS1
);
569 reg
&= ~(1 << bitnr
);
570 w83781d_write_value(data
, W83781D_REG_BEEP_INTS1
, reg
);
571 } else if (bitnr
< 16) {
572 reg
= w83781d_read_value(data
, W83781D_REG_BEEP_INTS2
);
574 reg
|= (1 << (bitnr
- 8));
576 reg
&= ~(1 << (bitnr
- 8));
577 w83781d_write_value(data
, W83781D_REG_BEEP_INTS2
, reg
);
579 reg
= w83781d_read_value(data
, W83781D_REG_BEEP_INTS3
);
581 reg
|= (1 << (bitnr
- 16));
583 reg
&= ~(1 << (bitnr
- 16));
584 w83781d_write_value(data
, W83781D_REG_BEEP_INTS3
, reg
);
586 mutex_unlock(&data
->update_lock
);
591 /* The W83781D has a single beep bit for temp2 and temp3 */
592 static ssize_t
show_temp3_beep(struct device
*dev
,
593 struct device_attribute
*attr
, char *buf
)
595 struct w83781d_data
*data
= w83781d_update_device(dev
);
596 int bitnr
= (data
->type
== w83781d
) ? 5 : 13;
597 return sprintf(buf
, "%u\n", (data
->beep_mask
>> bitnr
) & 1);
600 static SENSOR_DEVICE_ATTR(in0_beep
, S_IRUGO
| S_IWUSR
,
601 show_beep
, store_beep
, 0);
602 static SENSOR_DEVICE_ATTR(in1_beep
, S_IRUGO
| S_IWUSR
,
603 show_beep
, store_beep
, 1);
604 static SENSOR_DEVICE_ATTR(in2_beep
, S_IRUGO
| S_IWUSR
,
605 show_beep
, store_beep
, 2);
606 static SENSOR_DEVICE_ATTR(in3_beep
, S_IRUGO
| S_IWUSR
,
607 show_beep
, store_beep
, 3);
608 static SENSOR_DEVICE_ATTR(in4_beep
, S_IRUGO
| S_IWUSR
,
609 show_beep
, store_beep
, 8);
610 static SENSOR_DEVICE_ATTR(in5_beep
, S_IRUGO
| S_IWUSR
,
611 show_beep
, store_beep
, 9);
612 static SENSOR_DEVICE_ATTR(in6_beep
, S_IRUGO
| S_IWUSR
,
613 show_beep
, store_beep
, 10);
614 static SENSOR_DEVICE_ATTR(in7_beep
, S_IRUGO
| S_IWUSR
,
615 show_beep
, store_beep
, 16);
616 static SENSOR_DEVICE_ATTR(in8_beep
, S_IRUGO
| S_IWUSR
,
617 show_beep
, store_beep
, 17);
618 static SENSOR_DEVICE_ATTR(fan1_beep
, S_IRUGO
| S_IWUSR
,
619 show_beep
, store_beep
, 6);
620 static SENSOR_DEVICE_ATTR(fan2_beep
, S_IRUGO
| S_IWUSR
,
621 show_beep
, store_beep
, 7);
622 static SENSOR_DEVICE_ATTR(fan3_beep
, S_IRUGO
| S_IWUSR
,
623 show_beep
, store_beep
, 11);
624 static SENSOR_DEVICE_ATTR(temp1_beep
, S_IRUGO
| S_IWUSR
,
625 show_beep
, store_beep
, 4);
626 static SENSOR_DEVICE_ATTR(temp2_beep
, S_IRUGO
| S_IWUSR
,
627 show_beep
, store_beep
, 5);
628 static SENSOR_DEVICE_ATTR(temp3_beep
, S_IRUGO
,
629 show_temp3_beep
, store_beep
, 13);
630 static SENSOR_DEVICE_ATTR(beep_enable
, S_IRUGO
| S_IWUSR
,
631 show_beep
, store_beep
, 15);
634 show_fan_div(struct device
*dev
, struct device_attribute
*da
, char *buf
)
636 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
637 struct w83781d_data
*data
= w83781d_update_device(dev
);
638 return sprintf(buf
, "%ld\n",
639 (long) DIV_FROM_REG(data
->fan_div
[attr
->index
]));
643 * Note: we save and restore the fan minimum here, because its value is
644 * determined in part by the fan divisor. This follows the principle of
645 * least surprise; the user doesn't expect the fan minimum to change just
646 * because the divisor changed.
649 store_fan_div(struct device
*dev
, struct device_attribute
*da
,
650 const char *buf
, size_t count
)
652 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
653 struct w83781d_data
*data
= dev_get_drvdata(dev
);
655 int nr
= attr
->index
;
660 err
= kstrtoul(buf
, 10, &val
);
664 mutex_lock(&data
->update_lock
);
667 min
= FAN_FROM_REG(data
->fan_min
[nr
],
668 DIV_FROM_REG(data
->fan_div
[nr
]));
670 data
->fan_div
[nr
] = DIV_TO_REG(val
, data
->type
);
672 reg
= (w83781d_read_value(data
, nr
== 2 ?
673 W83781D_REG_PIN
: W83781D_REG_VID_FANDIV
)
674 & (nr
== 0 ? 0xcf : 0x3f))
675 | ((data
->fan_div
[nr
] & 0x03) << (nr
== 0 ? 4 : 6));
676 w83781d_write_value(data
, nr
== 2 ?
677 W83781D_REG_PIN
: W83781D_REG_VID_FANDIV
, reg
);
679 /* w83781d and as99127f don't have extended divisor bits */
680 if (data
->type
!= w83781d
&& data
->type
!= as99127f
) {
681 reg
= (w83781d_read_value(data
, W83781D_REG_VBAT
)
683 | ((data
->fan_div
[nr
] & 0x04) << (3 + nr
));
684 w83781d_write_value(data
, W83781D_REG_VBAT
, reg
);
687 /* Restore fan_min */
688 data
->fan_min
[nr
] = FAN_TO_REG(min
, DIV_FROM_REG(data
->fan_div
[nr
]));
689 w83781d_write_value(data
, W83781D_REG_FAN_MIN(nr
), data
->fan_min
[nr
]);
691 mutex_unlock(&data
->update_lock
);
695 static SENSOR_DEVICE_ATTR(fan1_div
, S_IRUGO
| S_IWUSR
,
696 show_fan_div
, store_fan_div
, 0);
697 static SENSOR_DEVICE_ATTR(fan2_div
, S_IRUGO
| S_IWUSR
,
698 show_fan_div
, store_fan_div
, 1);
699 static SENSOR_DEVICE_ATTR(fan3_div
, S_IRUGO
| S_IWUSR
,
700 show_fan_div
, store_fan_div
, 2);
703 show_pwm(struct device
*dev
, struct device_attribute
*da
, char *buf
)
705 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
706 struct w83781d_data
*data
= w83781d_update_device(dev
);
707 return sprintf(buf
, "%d\n", (int)data
->pwm
[attr
->index
]);
711 show_pwm2_enable(struct device
*dev
, struct device_attribute
*da
, char *buf
)
713 struct w83781d_data
*data
= w83781d_update_device(dev
);
714 return sprintf(buf
, "%d\n", (int)data
->pwm2_enable
);
718 store_pwm(struct device
*dev
, struct device_attribute
*da
, const char *buf
,
721 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
722 struct w83781d_data
*data
= dev_get_drvdata(dev
);
723 int nr
= attr
->index
;
727 err
= kstrtoul(buf
, 10, &val
);
731 mutex_lock(&data
->update_lock
);
732 data
->pwm
[nr
] = clamp_val(val
, 0, 255);
733 w83781d_write_value(data
, W83781D_REG_PWM
[nr
], data
->pwm
[nr
]);
734 mutex_unlock(&data
->update_lock
);
739 store_pwm2_enable(struct device
*dev
, struct device_attribute
*da
,
740 const char *buf
, size_t count
)
742 struct w83781d_data
*data
= dev_get_drvdata(dev
);
747 err
= kstrtoul(buf
, 10, &val
);
751 mutex_lock(&data
->update_lock
);
756 reg
= w83781d_read_value(data
, W83781D_REG_PWMCLK12
);
757 w83781d_write_value(data
, W83781D_REG_PWMCLK12
,
758 (reg
& 0xf7) | (val
<< 3));
760 reg
= w83781d_read_value(data
, W83781D_REG_BEEP_CONFIG
);
761 w83781d_write_value(data
, W83781D_REG_BEEP_CONFIG
,
762 (reg
& 0xef) | (!val
<< 4));
764 data
->pwm2_enable
= val
;
768 mutex_unlock(&data
->update_lock
);
772 mutex_unlock(&data
->update_lock
);
776 static SENSOR_DEVICE_ATTR(pwm1
, S_IRUGO
| S_IWUSR
, show_pwm
, store_pwm
, 0);
777 static SENSOR_DEVICE_ATTR(pwm2
, S_IRUGO
| S_IWUSR
, show_pwm
, store_pwm
, 1);
778 static SENSOR_DEVICE_ATTR(pwm3
, S_IRUGO
| S_IWUSR
, show_pwm
, store_pwm
, 2);
779 static SENSOR_DEVICE_ATTR(pwm4
, S_IRUGO
| S_IWUSR
, show_pwm
, store_pwm
, 3);
780 /* only PWM2 can be enabled/disabled */
781 static DEVICE_ATTR(pwm2_enable
, S_IRUGO
| S_IWUSR
,
782 show_pwm2_enable
, store_pwm2_enable
);
785 show_sensor(struct device
*dev
, struct device_attribute
*da
, char *buf
)
787 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
788 struct w83781d_data
*data
= w83781d_update_device(dev
);
789 return sprintf(buf
, "%d\n", (int)data
->sens
[attr
->index
]);
793 store_sensor(struct device
*dev
, struct device_attribute
*da
,
794 const char *buf
, size_t count
)
796 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
797 struct w83781d_data
*data
= dev_get_drvdata(dev
);
798 int nr
= attr
->index
;
803 err
= kstrtoul(buf
, 10, &val
);
807 mutex_lock(&data
->update_lock
);
810 case 1: /* PII/Celeron diode */
811 tmp
= w83781d_read_value(data
, W83781D_REG_SCFG1
);
812 w83781d_write_value(data
, W83781D_REG_SCFG1
,
813 tmp
| BIT_SCFG1
[nr
]);
814 tmp
= w83781d_read_value(data
, W83781D_REG_SCFG2
);
815 w83781d_write_value(data
, W83781D_REG_SCFG2
,
816 tmp
| BIT_SCFG2
[nr
]);
817 data
->sens
[nr
] = val
;
820 tmp
= w83781d_read_value(data
, W83781D_REG_SCFG1
);
821 w83781d_write_value(data
, W83781D_REG_SCFG1
,
822 tmp
| BIT_SCFG1
[nr
]);
823 tmp
= w83781d_read_value(data
, W83781D_REG_SCFG2
);
824 w83781d_write_value(data
, W83781D_REG_SCFG2
,
825 tmp
& ~BIT_SCFG2
[nr
]);
826 data
->sens
[nr
] = val
;
828 case W83781D_DEFAULT_BETA
:
830 "Sensor type %d is deprecated, please use 4 instead\n",
831 W83781D_DEFAULT_BETA
);
833 case 4: /* thermistor */
834 tmp
= w83781d_read_value(data
, W83781D_REG_SCFG1
);
835 w83781d_write_value(data
, W83781D_REG_SCFG1
,
836 tmp
& ~BIT_SCFG1
[nr
]);
837 data
->sens
[nr
] = val
;
840 dev_err(dev
, "Invalid sensor type %ld; must be 1, 2, or 4\n",
845 mutex_unlock(&data
->update_lock
);
849 static SENSOR_DEVICE_ATTR(temp1_type
, S_IRUGO
| S_IWUSR
,
850 show_sensor
, store_sensor
, 0);
851 static SENSOR_DEVICE_ATTR(temp2_type
, S_IRUGO
| S_IWUSR
,
852 show_sensor
, store_sensor
, 1);
853 static SENSOR_DEVICE_ATTR(temp3_type
, S_IRUGO
| S_IWUSR
,
854 show_sensor
, store_sensor
, 2);
857 * Assumes that adapter is of I2C, not ISA variety.
858 * OTHERWISE DON'T CALL THIS
861 w83781d_detect_subclients(struct i2c_client
*new_client
)
865 int address
= new_client
->addr
;
866 unsigned short sc_addr
[2];
867 struct i2c_adapter
*adapter
= new_client
->adapter
;
868 struct w83781d_data
*data
= i2c_get_clientdata(new_client
);
869 enum chips kind
= data
->type
;
872 id
= i2c_adapter_id(adapter
);
874 if (force_subclients
[0] == id
&& force_subclients
[1] == address
) {
875 for (i
= 2; i
<= 3; i
++) {
876 if (force_subclients
[i
] < 0x48 ||
877 force_subclients
[i
] > 0x4f) {
878 dev_err(&new_client
->dev
,
879 "Invalid subclient address %d; must be 0x48-0x4f\n",
880 force_subclients
[i
]);
885 w83781d_write_value(data
, W83781D_REG_I2C_SUBADDR
,
886 (force_subclients
[2] & 0x07) |
887 ((force_subclients
[3] & 0x07) << 4));
888 sc_addr
[0] = force_subclients
[2];
890 val1
= w83781d_read_value(data
, W83781D_REG_I2C_SUBADDR
);
891 sc_addr
[0] = 0x48 + (val1
& 0x07);
894 if (kind
!= w83783s
) {
896 if (force_subclients
[0] == id
&&
897 force_subclients
[1] == address
) {
898 sc_addr
[1] = force_subclients
[3];
900 sc_addr
[1] = 0x48 + ((val1
>> 4) & 0x07);
902 if (sc_addr
[0] == sc_addr
[1]) {
903 dev_err(&new_client
->dev
,
904 "Duplicate addresses 0x%x for subclients.\n",
911 for (i
= 0; i
< num_sc
; i
++) {
912 data
->lm75
[i
] = i2c_new_dummy(adapter
, sc_addr
[i
]);
913 if (!data
->lm75
[i
]) {
914 dev_err(&new_client
->dev
,
915 "Subclient %d registration at address 0x%x failed.\n",
926 /* Undo inits in case of errors */
928 i2c_unregister_device(data
->lm75
[0]);
934 #define IN_UNIT_ATTRS(X) \
935 &sensor_dev_attr_in##X##_input.dev_attr.attr, \
936 &sensor_dev_attr_in##X##_min.dev_attr.attr, \
937 &sensor_dev_attr_in##X##_max.dev_attr.attr, \
938 &sensor_dev_attr_in##X##_alarm.dev_attr.attr, \
939 &sensor_dev_attr_in##X##_beep.dev_attr.attr
941 #define FAN_UNIT_ATTRS(X) \
942 &sensor_dev_attr_fan##X##_input.dev_attr.attr, \
943 &sensor_dev_attr_fan##X##_min.dev_attr.attr, \
944 &sensor_dev_attr_fan##X##_div.dev_attr.attr, \
945 &sensor_dev_attr_fan##X##_alarm.dev_attr.attr, \
946 &sensor_dev_attr_fan##X##_beep.dev_attr.attr
948 #define TEMP_UNIT_ATTRS(X) \
949 &sensor_dev_attr_temp##X##_input.dev_attr.attr, \
950 &sensor_dev_attr_temp##X##_max.dev_attr.attr, \
951 &sensor_dev_attr_temp##X##_max_hyst.dev_attr.attr, \
952 &sensor_dev_attr_temp##X##_alarm.dev_attr.attr, \
953 &sensor_dev_attr_temp##X##_beep.dev_attr.attr
955 static struct attribute
*w83781d_attributes
[] = {
967 &dev_attr_cpu0_vid
.attr
,
969 &dev_attr_alarms
.attr
,
970 &dev_attr_beep_mask
.attr
,
971 &sensor_dev_attr_beep_enable
.dev_attr
.attr
,
974 static const struct attribute_group w83781d_group
= {
975 .attrs
= w83781d_attributes
,
978 static struct attribute
*w83781d_attributes_in1
[] = {
982 static const struct attribute_group w83781d_group_in1
= {
983 .attrs
= w83781d_attributes_in1
,
986 static struct attribute
*w83781d_attributes_in78
[] = {
991 static const struct attribute_group w83781d_group_in78
= {
992 .attrs
= w83781d_attributes_in78
,
995 static struct attribute
*w83781d_attributes_temp3
[] = {
999 static const struct attribute_group w83781d_group_temp3
= {
1000 .attrs
= w83781d_attributes_temp3
,
1003 static struct attribute
*w83781d_attributes_pwm12
[] = {
1004 &sensor_dev_attr_pwm1
.dev_attr
.attr
,
1005 &sensor_dev_attr_pwm2
.dev_attr
.attr
,
1006 &dev_attr_pwm2_enable
.attr
,
1009 static const struct attribute_group w83781d_group_pwm12
= {
1010 .attrs
= w83781d_attributes_pwm12
,
1013 static struct attribute
*w83781d_attributes_pwm34
[] = {
1014 &sensor_dev_attr_pwm3
.dev_attr
.attr
,
1015 &sensor_dev_attr_pwm4
.dev_attr
.attr
,
1018 static const struct attribute_group w83781d_group_pwm34
= {
1019 .attrs
= w83781d_attributes_pwm34
,
1022 static struct attribute
*w83781d_attributes_other
[] = {
1023 &sensor_dev_attr_temp1_type
.dev_attr
.attr
,
1024 &sensor_dev_attr_temp2_type
.dev_attr
.attr
,
1025 &sensor_dev_attr_temp3_type
.dev_attr
.attr
,
1028 static const struct attribute_group w83781d_group_other
= {
1029 .attrs
= w83781d_attributes_other
,
1032 /* No clean up is done on error, it's up to the caller */
1034 w83781d_create_files(struct device
*dev
, int kind
, int is_isa
)
1038 err
= sysfs_create_group(&dev
->kobj
, &w83781d_group
);
1042 if (kind
!= w83783s
) {
1043 err
= sysfs_create_group(&dev
->kobj
, &w83781d_group_in1
);
1047 if (kind
!= as99127f
&& kind
!= w83781d
&& kind
!= w83783s
) {
1048 err
= sysfs_create_group(&dev
->kobj
, &w83781d_group_in78
);
1052 if (kind
!= w83783s
) {
1053 err
= sysfs_create_group(&dev
->kobj
, &w83781d_group_temp3
);
1057 if (kind
!= w83781d
) {
1058 err
= sysfs_chmod_file(&dev
->kobj
,
1059 &sensor_dev_attr_temp3_alarm
.dev_attr
.attr
,
1066 if (kind
!= w83781d
&& kind
!= as99127f
) {
1067 err
= sysfs_create_group(&dev
->kobj
, &w83781d_group_pwm12
);
1071 if (kind
== w83782d
&& !is_isa
) {
1072 err
= sysfs_create_group(&dev
->kobj
, &w83781d_group_pwm34
);
1077 if (kind
!= as99127f
&& kind
!= w83781d
) {
1078 err
= device_create_file(dev
,
1079 &sensor_dev_attr_temp1_type
.dev_attr
);
1082 err
= device_create_file(dev
,
1083 &sensor_dev_attr_temp2_type
.dev_attr
);
1086 if (kind
!= w83783s
) {
1087 err
= device_create_file(dev
,
1088 &sensor_dev_attr_temp3_type
.dev_attr
);
1097 /* Return 0 if detection is successful, -ENODEV otherwise */
1099 w83781d_detect(struct i2c_client
*client
, struct i2c_board_info
*info
)
1102 struct w83781d_data
*isa
= w83781d_data_if_isa();
1103 struct i2c_adapter
*adapter
= client
->adapter
;
1104 int address
= client
->addr
;
1105 const char *client_name
;
1106 enum vendor
{ winbond
, asus
} vendid
;
1108 if (!i2c_check_functionality(adapter
, I2C_FUNC_SMBUS_BYTE_DATA
))
1112 * We block updates of the ISA device to minimize the risk of
1113 * concurrent access to the same W83781D chip through different
1117 mutex_lock(&isa
->update_lock
);
1119 if (i2c_smbus_read_byte_data(client
, W83781D_REG_CONFIG
) & 0x80) {
1120 dev_dbg(&adapter
->dev
,
1121 "Detection of w83781d chip failed at step 3\n");
1125 val1
= i2c_smbus_read_byte_data(client
, W83781D_REG_BANK
);
1126 val2
= i2c_smbus_read_byte_data(client
, W83781D_REG_CHIPMAN
);
1127 /* Check for Winbond or Asus ID if in bank 0 */
1128 if (!(val1
& 0x07) &&
1129 ((!(val1
& 0x80) && val2
!= 0xa3 && val2
!= 0xc3) ||
1130 ((val1
& 0x80) && val2
!= 0x5c && val2
!= 0x12))) {
1131 dev_dbg(&adapter
->dev
,
1132 "Detection of w83781d chip failed at step 4\n");
1136 * If Winbond SMBus, check address at 0x48.
1137 * Asus doesn't support, except for as99127f rev.2
1139 if ((!(val1
& 0x80) && val2
== 0xa3) ||
1140 ((val1
& 0x80) && val2
== 0x5c)) {
1141 if (i2c_smbus_read_byte_data(client
, W83781D_REG_I2C_ADDR
)
1143 dev_dbg(&adapter
->dev
,
1144 "Detection of w83781d chip failed at step 5\n");
1149 /* Put it now into bank 0 and Vendor ID High Byte */
1150 i2c_smbus_write_byte_data(client
, W83781D_REG_BANK
,
1151 (i2c_smbus_read_byte_data(client
, W83781D_REG_BANK
)
1154 /* Get the vendor ID */
1155 val2
= i2c_smbus_read_byte_data(client
, W83781D_REG_CHIPMAN
);
1158 else if (val2
== 0x12)
1161 dev_dbg(&adapter
->dev
,
1162 "w83781d chip vendor is neither Winbond nor Asus\n");
1166 /* Determine the chip type. */
1167 val1
= i2c_smbus_read_byte_data(client
, W83781D_REG_WCHIPID
);
1168 if ((val1
== 0x10 || val1
== 0x11) && vendid
== winbond
)
1169 client_name
= "w83781d";
1170 else if (val1
== 0x30 && vendid
== winbond
)
1171 client_name
= "w83782d";
1172 else if (val1
== 0x40 && vendid
== winbond
&& address
== 0x2d)
1173 client_name
= "w83783s";
1174 else if (val1
== 0x31)
1175 client_name
= "as99127f";
1179 if (val1
<= 0x30 && w83781d_alias_detect(client
, val1
)) {
1180 dev_dbg(&adapter
->dev
,
1181 "Device at 0x%02x appears to be the same as ISA device\n",
1187 mutex_unlock(&isa
->update_lock
);
1189 strlcpy(info
->type
, client_name
, I2C_NAME_SIZE
);
1195 mutex_unlock(&isa
->update_lock
);
1199 static void w83781d_remove_files(struct device
*dev
)
1201 sysfs_remove_group(&dev
->kobj
, &w83781d_group
);
1202 sysfs_remove_group(&dev
->kobj
, &w83781d_group_in1
);
1203 sysfs_remove_group(&dev
->kobj
, &w83781d_group_in78
);
1204 sysfs_remove_group(&dev
->kobj
, &w83781d_group_temp3
);
1205 sysfs_remove_group(&dev
->kobj
, &w83781d_group_pwm12
);
1206 sysfs_remove_group(&dev
->kobj
, &w83781d_group_pwm34
);
1207 sysfs_remove_group(&dev
->kobj
, &w83781d_group_other
);
1211 w83781d_probe(struct i2c_client
*client
, const struct i2c_device_id
*id
)
1213 struct device
*dev
= &client
->dev
;
1214 struct w83781d_data
*data
;
1217 data
= devm_kzalloc(dev
, sizeof(struct w83781d_data
), GFP_KERNEL
);
1221 i2c_set_clientdata(client
, data
);
1222 mutex_init(&data
->lock
);
1223 mutex_init(&data
->update_lock
);
1225 data
->type
= id
->driver_data
;
1226 data
->client
= client
;
1228 /* attach secondary i2c lm75-like clients */
1229 err
= w83781d_detect_subclients(client
);
1233 /* Initialize the chip */
1234 w83781d_init_device(dev
);
1236 /* Register sysfs hooks */
1237 err
= w83781d_create_files(dev
, data
->type
, 0);
1239 goto exit_remove_files
;
1241 data
->hwmon_dev
= hwmon_device_register(dev
);
1242 if (IS_ERR(data
->hwmon_dev
)) {
1243 err
= PTR_ERR(data
->hwmon_dev
);
1244 goto exit_remove_files
;
1250 w83781d_remove_files(dev
);
1252 i2c_unregister_device(data
->lm75
[0]);
1254 i2c_unregister_device(data
->lm75
[1]);
1259 w83781d_remove(struct i2c_client
*client
)
1261 struct w83781d_data
*data
= i2c_get_clientdata(client
);
1262 struct device
*dev
= &client
->dev
;
1264 hwmon_device_unregister(data
->hwmon_dev
);
1265 w83781d_remove_files(dev
);
1268 i2c_unregister_device(data
->lm75
[0]);
1270 i2c_unregister_device(data
->lm75
[1]);
1276 w83781d_read_value_i2c(struct w83781d_data
*data
, u16 reg
)
1278 struct i2c_client
*client
= data
->client
;
1280 struct i2c_client
*cl
;
1282 bank
= (reg
>> 8) & 0x0f;
1285 i2c_smbus_write_byte_data(client
, W83781D_REG_BANK
,
1287 if (bank
== 0 || bank
> 2) {
1288 res
= i2c_smbus_read_byte_data(client
, reg
& 0xff);
1290 /* switch to subclient */
1291 cl
= data
->lm75
[bank
- 1];
1292 /* convert from ISA to LM75 I2C addresses */
1293 switch (reg
& 0xff) {
1294 case 0x50: /* TEMP */
1295 res
= i2c_smbus_read_word_swapped(cl
, 0);
1297 case 0x52: /* CONFIG */
1298 res
= i2c_smbus_read_byte_data(cl
, 1);
1300 case 0x53: /* HYST */
1301 res
= i2c_smbus_read_word_swapped(cl
, 2);
1303 case 0x55: /* OVER */
1305 res
= i2c_smbus_read_word_swapped(cl
, 3);
1310 i2c_smbus_write_byte_data(client
, W83781D_REG_BANK
, 0);
1316 w83781d_write_value_i2c(struct w83781d_data
*data
, u16 reg
, u16 value
)
1318 struct i2c_client
*client
= data
->client
;
1320 struct i2c_client
*cl
;
1322 bank
= (reg
>> 8) & 0x0f;
1325 i2c_smbus_write_byte_data(client
, W83781D_REG_BANK
,
1327 if (bank
== 0 || bank
> 2) {
1328 i2c_smbus_write_byte_data(client
, reg
& 0xff,
1331 /* switch to subclient */
1332 cl
= data
->lm75
[bank
- 1];
1333 /* convert from ISA to LM75 I2C addresses */
1334 switch (reg
& 0xff) {
1335 case 0x52: /* CONFIG */
1336 i2c_smbus_write_byte_data(cl
, 1, value
& 0xff);
1338 case 0x53: /* HYST */
1339 i2c_smbus_write_word_swapped(cl
, 2, value
);
1341 case 0x55: /* OVER */
1342 i2c_smbus_write_word_swapped(cl
, 3, value
);
1347 i2c_smbus_write_byte_data(client
, W83781D_REG_BANK
, 0);
1353 w83781d_init_device(struct device
*dev
)
1355 struct w83781d_data
*data
= dev_get_drvdata(dev
);
1357 int type
= data
->type
;
1360 if (reset
&& type
!= as99127f
) { /*
1361 * this resets registers we don't have
1362 * documentation for on the as99127f
1365 * Resetting the chip has been the default for a long time,
1366 * but it causes the BIOS initializations (fan clock dividers,
1367 * thermal sensor types...) to be lost, so it is now optional.
1368 * It might even go away if nobody reports it as being useful,
1369 * as I see very little reason why this would be needed at
1373 "If reset=1 solved a problem you were having, please report!\n");
1375 /* save these registers */
1376 i
= w83781d_read_value(data
, W83781D_REG_BEEP_CONFIG
);
1377 p
= w83781d_read_value(data
, W83781D_REG_PWMCLK12
);
1379 * Reset all except Watchdog values and last conversion values
1380 * This sets fan-divs to 2, among others
1382 w83781d_write_value(data
, W83781D_REG_CONFIG
, 0x80);
1384 * Restore the registers and disable power-on abnormal beep.
1385 * This saves FAN 1/2/3 input/output values set by BIOS.
1387 w83781d_write_value(data
, W83781D_REG_BEEP_CONFIG
, i
| 0x80);
1388 w83781d_write_value(data
, W83781D_REG_PWMCLK12
, p
);
1390 * Disable master beep-enable (reset turns it on).
1391 * Individual beep_mask should be reset to off but for some
1392 * reason disabling this bit helps some people not get beeped
1394 w83781d_write_value(data
, W83781D_REG_BEEP_INTS2
, 0);
1398 * Disable power-on abnormal beep, as advised by the datasheet.
1399 * Already done if reset=1.
1401 if (init
&& !reset
&& type
!= as99127f
) {
1402 i
= w83781d_read_value(data
, W83781D_REG_BEEP_CONFIG
);
1403 w83781d_write_value(data
, W83781D_REG_BEEP_CONFIG
, i
| 0x80);
1406 data
->vrm
= vid_which_vrm();
1408 if ((type
!= w83781d
) && (type
!= as99127f
)) {
1409 tmp
= w83781d_read_value(data
, W83781D_REG_SCFG1
);
1410 for (i
= 1; i
<= 3; i
++) {
1411 if (!(tmp
& BIT_SCFG1
[i
- 1])) {
1412 data
->sens
[i
- 1] = 4;
1414 if (w83781d_read_value
1416 W83781D_REG_SCFG2
) & BIT_SCFG2
[i
- 1])
1417 data
->sens
[i
- 1] = 1;
1419 data
->sens
[i
- 1] = 2;
1421 if (type
== w83783s
&& i
== 2)
1426 if (init
&& type
!= as99127f
) {
1428 tmp
= w83781d_read_value(data
, W83781D_REG_TEMP2_CONFIG
);
1431 "Enabling temp2, readings might not make sense\n");
1432 w83781d_write_value(data
, W83781D_REG_TEMP2_CONFIG
,
1437 if (type
!= w83783s
) {
1438 tmp
= w83781d_read_value(data
,
1439 W83781D_REG_TEMP3_CONFIG
);
1442 "Enabling temp3, readings might not make sense\n");
1443 w83781d_write_value(data
,
1444 W83781D_REG_TEMP3_CONFIG
, tmp
& 0xfe);
1449 /* Start monitoring */
1450 w83781d_write_value(data
, W83781D_REG_CONFIG
,
1451 (w83781d_read_value(data
,
1452 W83781D_REG_CONFIG
) & 0xf7)
1455 /* A few vars need to be filled upon startup */
1456 for (i
= 0; i
< 3; i
++) {
1457 data
->fan_min
[i
] = w83781d_read_value(data
,
1458 W83781D_REG_FAN_MIN(i
));
1461 mutex_init(&data
->update_lock
);
1464 static struct w83781d_data
*w83781d_update_device(struct device
*dev
)
1466 struct w83781d_data
*data
= dev_get_drvdata(dev
);
1467 struct i2c_client
*client
= data
->client
;
1470 mutex_lock(&data
->update_lock
);
1472 if (time_after(jiffies
, data
->last_updated
+ HZ
+ HZ
/ 2)
1474 dev_dbg(dev
, "Starting device update\n");
1476 for (i
= 0; i
<= 8; i
++) {
1477 if (data
->type
== w83783s
&& i
== 1)
1478 continue; /* 783S has no in1 */
1480 w83781d_read_value(data
, W83781D_REG_IN(i
));
1482 w83781d_read_value(data
, W83781D_REG_IN_MIN(i
));
1484 w83781d_read_value(data
, W83781D_REG_IN_MAX(i
));
1485 if ((data
->type
!= w83782d
) && (i
== 6))
1488 for (i
= 0; i
< 3; i
++) {
1490 w83781d_read_value(data
, W83781D_REG_FAN(i
));
1492 w83781d_read_value(data
, W83781D_REG_FAN_MIN(i
));
1494 if (data
->type
!= w83781d
&& data
->type
!= as99127f
) {
1495 for (i
= 0; i
< 4; i
++) {
1497 w83781d_read_value(data
,
1498 W83781D_REG_PWM
[i
]);
1499 /* Only W83782D on SMBus has PWM3 and PWM4 */
1500 if ((data
->type
!= w83782d
|| !client
)
1504 /* Only PWM2 can be disabled */
1505 data
->pwm2_enable
= (w83781d_read_value(data
,
1506 W83781D_REG_PWMCLK12
) & 0x08) >> 3;
1509 data
->temp
= w83781d_read_value(data
, W83781D_REG_TEMP(1));
1511 w83781d_read_value(data
, W83781D_REG_TEMP_OVER(1));
1512 data
->temp_max_hyst
=
1513 w83781d_read_value(data
, W83781D_REG_TEMP_HYST(1));
1515 w83781d_read_value(data
, W83781D_REG_TEMP(2));
1516 data
->temp_max_add
[0] =
1517 w83781d_read_value(data
, W83781D_REG_TEMP_OVER(2));
1518 data
->temp_max_hyst_add
[0] =
1519 w83781d_read_value(data
, W83781D_REG_TEMP_HYST(2));
1520 if (data
->type
!= w83783s
) {
1522 w83781d_read_value(data
, W83781D_REG_TEMP(3));
1523 data
->temp_max_add
[1] =
1524 w83781d_read_value(data
,
1525 W83781D_REG_TEMP_OVER(3));
1526 data
->temp_max_hyst_add
[1] =
1527 w83781d_read_value(data
,
1528 W83781D_REG_TEMP_HYST(3));
1530 i
= w83781d_read_value(data
, W83781D_REG_VID_FANDIV
);
1531 data
->vid
= i
& 0x0f;
1532 data
->vid
|= (w83781d_read_value(data
,
1533 W83781D_REG_CHIPID
) & 0x01) << 4;
1534 data
->fan_div
[0] = (i
>> 4) & 0x03;
1535 data
->fan_div
[1] = (i
>> 6) & 0x03;
1536 data
->fan_div
[2] = (w83781d_read_value(data
,
1537 W83781D_REG_PIN
) >> 6) & 0x03;
1538 if ((data
->type
!= w83781d
) && (data
->type
!= as99127f
)) {
1539 i
= w83781d_read_value(data
, W83781D_REG_VBAT
);
1540 data
->fan_div
[0] |= (i
>> 3) & 0x04;
1541 data
->fan_div
[1] |= (i
>> 4) & 0x04;
1542 data
->fan_div
[2] |= (i
>> 5) & 0x04;
1544 if (data
->type
== w83782d
) {
1545 data
->alarms
= w83781d_read_value(data
,
1547 | (w83781d_read_value(data
,
1548 W83782D_REG_ALARM2
) << 8)
1549 | (w83781d_read_value(data
,
1550 W83782D_REG_ALARM3
) << 16);
1551 } else if (data
->type
== w83783s
) {
1552 data
->alarms
= w83781d_read_value(data
,
1554 | (w83781d_read_value(data
,
1555 W83782D_REG_ALARM2
) << 8);
1558 * No real-time status registers, fall back to
1559 * interrupt status registers
1561 data
->alarms
= w83781d_read_value(data
,
1563 | (w83781d_read_value(data
,
1564 W83781D_REG_ALARM2
) << 8);
1566 i
= w83781d_read_value(data
, W83781D_REG_BEEP_INTS2
);
1567 data
->beep_mask
= (i
<< 8) +
1568 w83781d_read_value(data
, W83781D_REG_BEEP_INTS1
);
1569 if ((data
->type
!= w83781d
) && (data
->type
!= as99127f
)) {
1571 w83781d_read_value(data
,
1572 W83781D_REG_BEEP_INTS3
) << 16;
1574 data
->last_updated
= jiffies
;
1578 mutex_unlock(&data
->update_lock
);
1583 static const struct i2c_device_id w83781d_ids
[] = {
1584 { "w83781d", w83781d
, },
1585 { "w83782d", w83782d
, },
1586 { "w83783s", w83783s
, },
1587 { "as99127f", as99127f
},
1590 MODULE_DEVICE_TABLE(i2c
, w83781d_ids
);
1592 static struct i2c_driver w83781d_driver
= {
1593 .class = I2C_CLASS_HWMON
,
1597 .probe
= w83781d_probe
,
1598 .remove
= w83781d_remove
,
1599 .id_table
= w83781d_ids
,
1600 .detect
= w83781d_detect
,
1601 .address_list
= normal_i2c
,
1609 /* ISA device, if found */
1610 static struct platform_device
*pdev
;
1612 static unsigned short isa_address
= 0x290;
1615 * I2C devices get this name attribute automatically, but for ISA devices
1616 * we must create it by ourselves.
1619 show_name(struct device
*dev
, struct device_attribute
*devattr
, char *buf
)
1621 struct w83781d_data
*data
= dev_get_drvdata(dev
);
1622 return sprintf(buf
, "%s\n", data
->name
);
1624 static DEVICE_ATTR(name
, S_IRUGO
, show_name
, NULL
);
1626 static struct w83781d_data
*w83781d_data_if_isa(void)
1628 return pdev
? platform_get_drvdata(pdev
) : NULL
;
1631 /* Returns 1 if the I2C chip appears to be an alias of the ISA chip */
1632 static int w83781d_alias_detect(struct i2c_client
*client
, u8 chipid
)
1634 struct w83781d_data
*isa
;
1637 if (!pdev
) /* No ISA chip */
1640 isa
= platform_get_drvdata(pdev
);
1642 if (w83781d_read_value(isa
, W83781D_REG_I2C_ADDR
) != client
->addr
)
1643 return 0; /* Address doesn't match */
1644 if (w83781d_read_value(isa
, W83781D_REG_WCHIPID
) != chipid
)
1645 return 0; /* Chip type doesn't match */
1648 * We compare all the limit registers, the config register and the
1649 * interrupt mask registers
1651 for (i
= 0x2b; i
<= 0x3d; i
++) {
1652 if (w83781d_read_value(isa
, i
) !=
1653 i2c_smbus_read_byte_data(client
, i
))
1656 if (w83781d_read_value(isa
, W83781D_REG_CONFIG
) !=
1657 i2c_smbus_read_byte_data(client
, W83781D_REG_CONFIG
))
1659 for (i
= 0x43; i
<= 0x46; i
++) {
1660 if (w83781d_read_value(isa
, i
) !=
1661 i2c_smbus_read_byte_data(client
, i
))
1669 w83781d_read_value_isa(struct w83781d_data
*data
, u16 reg
)
1671 int word_sized
, res
;
1673 word_sized
= (((reg
& 0xff00) == 0x100)
1674 || ((reg
& 0xff00) == 0x200))
1675 && (((reg
& 0x00ff) == 0x50)
1676 || ((reg
& 0x00ff) == 0x53)
1677 || ((reg
& 0x00ff) == 0x55));
1679 outb_p(W83781D_REG_BANK
,
1680 data
->isa_addr
+ W83781D_ADDR_REG_OFFSET
);
1682 data
->isa_addr
+ W83781D_DATA_REG_OFFSET
);
1684 outb_p(reg
& 0xff, data
->isa_addr
+ W83781D_ADDR_REG_OFFSET
);
1685 res
= inb_p(data
->isa_addr
+ W83781D_DATA_REG_OFFSET
);
1687 outb_p((reg
& 0xff) + 1,
1688 data
->isa_addr
+ W83781D_ADDR_REG_OFFSET
);
1690 (res
<< 8) + inb_p(data
->isa_addr
+
1691 W83781D_DATA_REG_OFFSET
);
1694 outb_p(W83781D_REG_BANK
,
1695 data
->isa_addr
+ W83781D_ADDR_REG_OFFSET
);
1696 outb_p(0, data
->isa_addr
+ W83781D_DATA_REG_OFFSET
);
1702 w83781d_write_value_isa(struct w83781d_data
*data
, u16 reg
, u16 value
)
1706 word_sized
= (((reg
& 0xff00) == 0x100)
1707 || ((reg
& 0xff00) == 0x200))
1708 && (((reg
& 0x00ff) == 0x53)
1709 || ((reg
& 0x00ff) == 0x55));
1711 outb_p(W83781D_REG_BANK
,
1712 data
->isa_addr
+ W83781D_ADDR_REG_OFFSET
);
1714 data
->isa_addr
+ W83781D_DATA_REG_OFFSET
);
1716 outb_p(reg
& 0xff, data
->isa_addr
+ W83781D_ADDR_REG_OFFSET
);
1719 data
->isa_addr
+ W83781D_DATA_REG_OFFSET
);
1720 outb_p((reg
& 0xff) + 1,
1721 data
->isa_addr
+ W83781D_ADDR_REG_OFFSET
);
1723 outb_p(value
& 0xff, data
->isa_addr
+ W83781D_DATA_REG_OFFSET
);
1725 outb_p(W83781D_REG_BANK
,
1726 data
->isa_addr
+ W83781D_ADDR_REG_OFFSET
);
1727 outb_p(0, data
->isa_addr
+ W83781D_DATA_REG_OFFSET
);
1732 * The SMBus locks itself, usually, but nothing may access the Winbond between
1733 * bank switches. ISA access must always be locked explicitly!
1734 * We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
1735 * would slow down the W83781D access and should not be necessary.
1736 * There are some ugly typecasts here, but the good news is - they should
1737 * nowhere else be necessary!
1740 w83781d_read_value(struct w83781d_data
*data
, u16 reg
)
1742 struct i2c_client
*client
= data
->client
;
1745 mutex_lock(&data
->lock
);
1747 res
= w83781d_read_value_i2c(data
, reg
);
1749 res
= w83781d_read_value_isa(data
, reg
);
1750 mutex_unlock(&data
->lock
);
1755 w83781d_write_value(struct w83781d_data
*data
, u16 reg
, u16 value
)
1757 struct i2c_client
*client
= data
->client
;
1759 mutex_lock(&data
->lock
);
1761 w83781d_write_value_i2c(data
, reg
, value
);
1763 w83781d_write_value_isa(data
, reg
, value
);
1764 mutex_unlock(&data
->lock
);
1769 w83781d_isa_probe(struct platform_device
*pdev
)
1772 struct w83781d_data
*data
;
1773 struct resource
*res
;
1775 /* Reserve the ISA region */
1776 res
= platform_get_resource(pdev
, IORESOURCE_IO
, 0);
1777 if (!devm_request_region(&pdev
->dev
,
1778 res
->start
+ W83781D_ADDR_REG_OFFSET
, 2,
1782 data
= devm_kzalloc(&pdev
->dev
, sizeof(struct w83781d_data
),
1787 mutex_init(&data
->lock
);
1788 data
->isa_addr
= res
->start
;
1789 platform_set_drvdata(pdev
, data
);
1791 reg
= w83781d_read_value(data
, W83781D_REG_WCHIPID
);
1794 data
->type
= w83782d
;
1795 data
->name
= "w83782d";
1798 data
->type
= w83781d
;
1799 data
->name
= "w83781d";
1802 /* Initialize the W83781D chip */
1803 w83781d_init_device(&pdev
->dev
);
1805 /* Register sysfs hooks */
1806 err
= w83781d_create_files(&pdev
->dev
, data
->type
, 1);
1808 goto exit_remove_files
;
1810 err
= device_create_file(&pdev
->dev
, &dev_attr_name
);
1812 goto exit_remove_files
;
1814 data
->hwmon_dev
= hwmon_device_register(&pdev
->dev
);
1815 if (IS_ERR(data
->hwmon_dev
)) {
1816 err
= PTR_ERR(data
->hwmon_dev
);
1817 goto exit_remove_files
;
1823 w83781d_remove_files(&pdev
->dev
);
1824 device_remove_file(&pdev
->dev
, &dev_attr_name
);
1829 w83781d_isa_remove(struct platform_device
*pdev
)
1831 struct w83781d_data
*data
= platform_get_drvdata(pdev
);
1833 hwmon_device_unregister(data
->hwmon_dev
);
1834 w83781d_remove_files(&pdev
->dev
);
1835 device_remove_file(&pdev
->dev
, &dev_attr_name
);
1840 static struct platform_driver w83781d_isa_driver
= {
1842 .owner
= THIS_MODULE
,
1845 .probe
= w83781d_isa_probe
,
1846 .remove
= w83781d_isa_remove
,
1849 /* return 1 if a supported chip is found, 0 otherwise */
1851 w83781d_isa_found(unsigned short address
)
1853 int val
, save
, found
= 0;
1857 * Some boards declare base+0 to base+7 as a PNP device, some base+4
1858 * to base+7 and some base+5 to base+6. So we better request each port
1859 * individually for the probing phase.
1861 for (port
= address
; port
< address
+ W83781D_EXTENT
; port
++) {
1862 if (!request_region(port
, 1, "w83781d")) {
1863 pr_debug("Failed to request port 0x%x\n", port
);
1868 #define REALLY_SLOW_IO
1870 * We need the timeouts for at least some W83781D-like
1871 * chips. But only if we read 'undefined' registers.
1873 val
= inb_p(address
+ 1);
1874 if (inb_p(address
+ 2) != val
1875 || inb_p(address
+ 3) != val
1876 || inb_p(address
+ 7) != val
) {
1877 pr_debug("Detection failed at step %d\n", 1);
1880 #undef REALLY_SLOW_IO
1883 * We should be able to change the 7 LSB of the address port. The
1884 * MSB (busy flag) should be clear initially, set after the write.
1886 save
= inb_p(address
+ W83781D_ADDR_REG_OFFSET
);
1888 pr_debug("Detection failed at step %d\n", 2);
1892 outb_p(val
, address
+ W83781D_ADDR_REG_OFFSET
);
1893 if (inb_p(address
+ W83781D_ADDR_REG_OFFSET
) != (val
| 0x80)) {
1894 outb_p(save
, address
+ W83781D_ADDR_REG_OFFSET
);
1895 pr_debug("Detection failed at step %d\n", 3);
1899 /* We found a device, now see if it could be a W83781D */
1900 outb_p(W83781D_REG_CONFIG
, address
+ W83781D_ADDR_REG_OFFSET
);
1901 val
= inb_p(address
+ W83781D_DATA_REG_OFFSET
);
1903 pr_debug("Detection failed at step %d\n", 4);
1906 outb_p(W83781D_REG_BANK
, address
+ W83781D_ADDR_REG_OFFSET
);
1907 save
= inb_p(address
+ W83781D_DATA_REG_OFFSET
);
1908 outb_p(W83781D_REG_CHIPMAN
, address
+ W83781D_ADDR_REG_OFFSET
);
1909 val
= inb_p(address
+ W83781D_DATA_REG_OFFSET
);
1910 if ((!(save
& 0x80) && (val
!= 0xa3))
1911 || ((save
& 0x80) && (val
!= 0x5c))) {
1912 pr_debug("Detection failed at step %d\n", 5);
1915 outb_p(W83781D_REG_I2C_ADDR
, address
+ W83781D_ADDR_REG_OFFSET
);
1916 val
= inb_p(address
+ W83781D_DATA_REG_OFFSET
);
1917 if (val
< 0x03 || val
> 0x77) { /* Not a valid I2C address */
1918 pr_debug("Detection failed at step %d\n", 6);
1922 /* The busy flag should be clear again */
1923 if (inb_p(address
+ W83781D_ADDR_REG_OFFSET
) & 0x80) {
1924 pr_debug("Detection failed at step %d\n", 7);
1928 /* Determine the chip type */
1929 outb_p(W83781D_REG_BANK
, address
+ W83781D_ADDR_REG_OFFSET
);
1930 save
= inb_p(address
+ W83781D_DATA_REG_OFFSET
);
1931 outb_p(save
& 0xf8, address
+ W83781D_DATA_REG_OFFSET
);
1932 outb_p(W83781D_REG_WCHIPID
, address
+ W83781D_ADDR_REG_OFFSET
);
1933 val
= inb_p(address
+ W83781D_DATA_REG_OFFSET
);
1934 if ((val
& 0xfe) == 0x10 /* W83781D */
1935 || val
== 0x30) /* W83782D */
1939 pr_info("Found a %s chip at %#x\n",
1940 val
== 0x30 ? "W83782D" : "W83781D", (int)address
);
1943 for (port
--; port
>= address
; port
--)
1944 release_region(port
, 1);
1949 w83781d_isa_device_add(unsigned short address
)
1951 struct resource res
= {
1953 .end
= address
+ W83781D_EXTENT
- 1,
1955 .flags
= IORESOURCE_IO
,
1959 pdev
= platform_device_alloc("w83781d", address
);
1962 pr_err("Device allocation failed\n");
1966 err
= platform_device_add_resources(pdev
, &res
, 1);
1968 pr_err("Device resource addition failed (%d)\n", err
);
1969 goto exit_device_put
;
1972 err
= platform_device_add(pdev
);
1974 pr_err("Device addition failed (%d)\n", err
);
1975 goto exit_device_put
;
1981 platform_device_put(pdev
);
1988 w83781d_isa_register(void)
1992 if (w83781d_isa_found(isa_address
)) {
1993 res
= platform_driver_register(&w83781d_isa_driver
);
1997 /* Sets global pdev as a side effect */
1998 res
= w83781d_isa_device_add(isa_address
);
2000 goto exit_unreg_isa_driver
;
2005 exit_unreg_isa_driver
:
2006 platform_driver_unregister(&w83781d_isa_driver
);
2012 w83781d_isa_unregister(void)
2015 platform_device_unregister(pdev
);
2016 platform_driver_unregister(&w83781d_isa_driver
);
2019 #else /* !CONFIG_ISA */
2021 static struct w83781d_data
*w83781d_data_if_isa(void)
2027 w83781d_alias_detect(struct i2c_client
*client
, u8 chipid
)
2033 w83781d_read_value(struct w83781d_data
*data
, u16 reg
)
2037 mutex_lock(&data
->lock
);
2038 res
= w83781d_read_value_i2c(data
, reg
);
2039 mutex_unlock(&data
->lock
);
2045 w83781d_write_value(struct w83781d_data
*data
, u16 reg
, u16 value
)
2047 mutex_lock(&data
->lock
);
2048 w83781d_write_value_i2c(data
, reg
, value
);
2049 mutex_unlock(&data
->lock
);
2055 w83781d_isa_register(void)
2061 w83781d_isa_unregister(void)
2064 #endif /* CONFIG_ISA */
2067 sensors_w83781d_init(void)
2072 * We register the ISA device first, so that we can skip the
2073 * registration of an I2C interface to the same device.
2075 res
= w83781d_isa_register();
2079 res
= i2c_add_driver(&w83781d_driver
);
2081 goto exit_unreg_isa
;
2086 w83781d_isa_unregister();
2092 sensors_w83781d_exit(void)
2094 w83781d_isa_unregister();
2095 i2c_del_driver(&w83781d_driver
);
2098 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
2099 "Philip Edelbrock <phil@netroedge.com>, "
2100 "and Mark Studebaker <mdsxyz123@yahoo.com>");
2101 MODULE_DESCRIPTION("W83781D driver");
2102 MODULE_LICENSE("GPL");
2104 module_init(sensors_w83781d_init
);
2105 module_exit(sensors_w83781d_exit
);