1 /***************************************************************************
3 * Copyright (C) 2007-2010 SMSC
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version 2
8 * of the License, or (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 *****************************************************************************/
21 #include <linux/module.h>
22 #include <linux/kmod.h>
23 #include <linux/init.h>
24 #include <linux/netdevice.h>
25 #include <linux/etherdevice.h>
26 #include <linux/ethtool.h>
27 #include <linux/mii.h>
28 #include <linux/usb.h>
29 #include <linux/bitrev.h>
30 #include <linux/crc16.h>
31 #include <linux/crc32.h>
32 #include <linux/usb/usbnet.h>
33 #include <linux/slab.h>
36 #define SMSC_CHIPNAME "smsc75xx"
37 #define SMSC_DRIVER_VERSION "1.0.0"
38 #define HS_USB_PKT_SIZE (512)
39 #define FS_USB_PKT_SIZE (64)
40 #define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE)
41 #define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE)
42 #define DEFAULT_BULK_IN_DELAY (0x00002000)
43 #define MAX_SINGLE_PACKET_SIZE (9000)
44 #define LAN75XX_EEPROM_MAGIC (0x7500)
45 #define EEPROM_MAC_OFFSET (0x01)
46 #define DEFAULT_TX_CSUM_ENABLE (true)
47 #define DEFAULT_RX_CSUM_ENABLE (true)
48 #define SMSC75XX_INTERNAL_PHY_ID (1)
49 #define SMSC75XX_TX_OVERHEAD (8)
50 #define MAX_RX_FIFO_SIZE (20 * 1024)
51 #define MAX_TX_FIFO_SIZE (12 * 1024)
52 #define USB_VENDOR_ID_SMSC (0x0424)
53 #define USB_PRODUCT_ID_LAN7500 (0x7500)
54 #define USB_PRODUCT_ID_LAN7505 (0x7505)
56 #define SUPPORTED_WAKE (WAKE_PHY | WAKE_UCAST | WAKE_BCAST | \
57 WAKE_MCAST | WAKE_ARP | WAKE_MAGIC)
59 #define SUSPEND_SUSPEND0 (0x01)
60 #define SUSPEND_SUSPEND1 (0x02)
61 #define SUSPEND_SUSPEND2 (0x04)
62 #define SUSPEND_SUSPEND3 (0x08)
63 #define SUSPEND_ALLMODES (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
64 SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
66 struct smsc75xx_priv
{
70 u32 multicast_hash_table
[DP_SEL_VHF_HASH_LEN
];
71 struct mutex dataport_mutex
;
72 spinlock_t rfe_ctl_lock
;
73 struct work_struct set_multicast
;
78 struct usb_ctrlrequest req
;
82 static bool turbo_mode
= true;
83 module_param(turbo_mode
, bool, 0644);
84 MODULE_PARM_DESC(turbo_mode
, "Enable multiple frames per Rx transaction");
86 static int __must_check
__smsc75xx_read_reg(struct usbnet
*dev
, u32 index
,
91 int (*fn
)(struct usbnet
*, u8
, u8
, u16
, u16
, void *, u16
);
98 fn
= usbnet_read_cmd_nopm
;
100 ret
= fn(dev
, USB_VENDOR_REQUEST_READ_REGISTER
, USB_DIR_IN
101 | USB_TYPE_VENDOR
| USB_RECIP_DEVICE
,
103 if (unlikely(ret
< 0))
104 netdev_warn(dev
->net
, "Failed to read reg index 0x%08x: %d\n",
113 static int __must_check
__smsc75xx_write_reg(struct usbnet
*dev
, u32 index
,
118 int (*fn
)(struct usbnet
*, u8
, u8
, u16
, u16
, const void *, u16
);
123 fn
= usbnet_write_cmd
;
125 fn
= usbnet_write_cmd_nopm
;
130 ret
= fn(dev
, USB_VENDOR_REQUEST_WRITE_REGISTER
, USB_DIR_OUT
131 | USB_TYPE_VENDOR
| USB_RECIP_DEVICE
,
133 if (unlikely(ret
< 0))
134 netdev_warn(dev
->net
, "Failed to write reg index 0x%08x: %d\n",
140 static int __must_check
smsc75xx_read_reg_nopm(struct usbnet
*dev
, u32 index
,
143 return __smsc75xx_read_reg(dev
, index
, data
, 1);
146 static int __must_check
smsc75xx_write_reg_nopm(struct usbnet
*dev
, u32 index
,
149 return __smsc75xx_write_reg(dev
, index
, data
, 1);
152 static int __must_check
smsc75xx_read_reg(struct usbnet
*dev
, u32 index
,
155 return __smsc75xx_read_reg(dev
, index
, data
, 0);
158 static int __must_check
smsc75xx_write_reg(struct usbnet
*dev
, u32 index
,
161 return __smsc75xx_write_reg(dev
, index
, data
, 0);
164 /* Loop until the read is completed with timeout
165 * called with phy_mutex held */
166 static __must_check
int __smsc75xx_phy_wait_not_busy(struct usbnet
*dev
,
169 unsigned long start_time
= jiffies
;
174 ret
= __smsc75xx_read_reg(dev
, MII_ACCESS
, &val
, in_pm
);
176 netdev_warn(dev
->net
, "Error reading MII_ACCESS\n");
180 if (!(val
& MII_ACCESS_BUSY
))
182 } while (!time_after(jiffies
, start_time
+ HZ
));
187 static int __smsc75xx_mdio_read(struct net_device
*netdev
, int phy_id
, int idx
,
190 struct usbnet
*dev
= netdev_priv(netdev
);
194 mutex_lock(&dev
->phy_mutex
);
196 /* confirm MII not busy */
197 ret
= __smsc75xx_phy_wait_not_busy(dev
, in_pm
);
199 netdev_warn(dev
->net
, "MII is busy in smsc75xx_mdio_read\n");
203 /* set the address, index & direction (read from PHY) */
204 phy_id
&= dev
->mii
.phy_id_mask
;
205 idx
&= dev
->mii
.reg_num_mask
;
206 addr
= ((phy_id
<< MII_ACCESS_PHY_ADDR_SHIFT
) & MII_ACCESS_PHY_ADDR
)
207 | ((idx
<< MII_ACCESS_REG_ADDR_SHIFT
) & MII_ACCESS_REG_ADDR
)
208 | MII_ACCESS_READ
| MII_ACCESS_BUSY
;
209 ret
= __smsc75xx_write_reg(dev
, MII_ACCESS
, addr
, in_pm
);
211 netdev_warn(dev
->net
, "Error writing MII_ACCESS\n");
215 ret
= __smsc75xx_phy_wait_not_busy(dev
, in_pm
);
217 netdev_warn(dev
->net
, "Timed out reading MII reg %02X\n", idx
);
221 ret
= __smsc75xx_read_reg(dev
, MII_DATA
, &val
, in_pm
);
223 netdev_warn(dev
->net
, "Error reading MII_DATA\n");
227 ret
= (u16
)(val
& 0xFFFF);
230 mutex_unlock(&dev
->phy_mutex
);
234 static void __smsc75xx_mdio_write(struct net_device
*netdev
, int phy_id
,
235 int idx
, int regval
, int in_pm
)
237 struct usbnet
*dev
= netdev_priv(netdev
);
241 mutex_lock(&dev
->phy_mutex
);
243 /* confirm MII not busy */
244 ret
= __smsc75xx_phy_wait_not_busy(dev
, in_pm
);
246 netdev_warn(dev
->net
, "MII is busy in smsc75xx_mdio_write\n");
251 ret
= __smsc75xx_write_reg(dev
, MII_DATA
, val
, in_pm
);
253 netdev_warn(dev
->net
, "Error writing MII_DATA\n");
257 /* set the address, index & direction (write to PHY) */
258 phy_id
&= dev
->mii
.phy_id_mask
;
259 idx
&= dev
->mii
.reg_num_mask
;
260 addr
= ((phy_id
<< MII_ACCESS_PHY_ADDR_SHIFT
) & MII_ACCESS_PHY_ADDR
)
261 | ((idx
<< MII_ACCESS_REG_ADDR_SHIFT
) & MII_ACCESS_REG_ADDR
)
262 | MII_ACCESS_WRITE
| MII_ACCESS_BUSY
;
263 ret
= __smsc75xx_write_reg(dev
, MII_ACCESS
, addr
, in_pm
);
265 netdev_warn(dev
->net
, "Error writing MII_ACCESS\n");
269 ret
= __smsc75xx_phy_wait_not_busy(dev
, in_pm
);
271 netdev_warn(dev
->net
, "Timed out writing MII reg %02X\n", idx
);
276 mutex_unlock(&dev
->phy_mutex
);
279 static int smsc75xx_mdio_read_nopm(struct net_device
*netdev
, int phy_id
,
282 return __smsc75xx_mdio_read(netdev
, phy_id
, idx
, 1);
285 static void smsc75xx_mdio_write_nopm(struct net_device
*netdev
, int phy_id
,
288 __smsc75xx_mdio_write(netdev
, phy_id
, idx
, regval
, 1);
291 static int smsc75xx_mdio_read(struct net_device
*netdev
, int phy_id
, int idx
)
293 return __smsc75xx_mdio_read(netdev
, phy_id
, idx
, 0);
296 static void smsc75xx_mdio_write(struct net_device
*netdev
, int phy_id
, int idx
,
299 __smsc75xx_mdio_write(netdev
, phy_id
, idx
, regval
, 0);
302 static int smsc75xx_wait_eeprom(struct usbnet
*dev
)
304 unsigned long start_time
= jiffies
;
309 ret
= smsc75xx_read_reg(dev
, E2P_CMD
, &val
);
311 netdev_warn(dev
->net
, "Error reading E2P_CMD\n");
315 if (!(val
& E2P_CMD_BUSY
) || (val
& E2P_CMD_TIMEOUT
))
318 } while (!time_after(jiffies
, start_time
+ HZ
));
320 if (val
& (E2P_CMD_TIMEOUT
| E2P_CMD_BUSY
)) {
321 netdev_warn(dev
->net
, "EEPROM read operation timeout\n");
328 static int smsc75xx_eeprom_confirm_not_busy(struct usbnet
*dev
)
330 unsigned long start_time
= jiffies
;
335 ret
= smsc75xx_read_reg(dev
, E2P_CMD
, &val
);
337 netdev_warn(dev
->net
, "Error reading E2P_CMD\n");
341 if (!(val
& E2P_CMD_BUSY
))
345 } while (!time_after(jiffies
, start_time
+ HZ
));
347 netdev_warn(dev
->net
, "EEPROM is busy\n");
351 static int smsc75xx_read_eeprom(struct usbnet
*dev
, u32 offset
, u32 length
,
360 ret
= smsc75xx_eeprom_confirm_not_busy(dev
);
364 for (i
= 0; i
< length
; i
++) {
365 val
= E2P_CMD_BUSY
| E2P_CMD_READ
| (offset
& E2P_CMD_ADDR
);
366 ret
= smsc75xx_write_reg(dev
, E2P_CMD
, val
);
368 netdev_warn(dev
->net
, "Error writing E2P_CMD\n");
372 ret
= smsc75xx_wait_eeprom(dev
);
376 ret
= smsc75xx_read_reg(dev
, E2P_DATA
, &val
);
378 netdev_warn(dev
->net
, "Error reading E2P_DATA\n");
382 data
[i
] = val
& 0xFF;
389 static int smsc75xx_write_eeprom(struct usbnet
*dev
, u32 offset
, u32 length
,
398 ret
= smsc75xx_eeprom_confirm_not_busy(dev
);
402 /* Issue write/erase enable command */
403 val
= E2P_CMD_BUSY
| E2P_CMD_EWEN
;
404 ret
= smsc75xx_write_reg(dev
, E2P_CMD
, val
);
406 netdev_warn(dev
->net
, "Error writing E2P_CMD\n");
410 ret
= smsc75xx_wait_eeprom(dev
);
414 for (i
= 0; i
< length
; i
++) {
416 /* Fill data register */
418 ret
= smsc75xx_write_reg(dev
, E2P_DATA
, val
);
420 netdev_warn(dev
->net
, "Error writing E2P_DATA\n");
424 /* Send "write" command */
425 val
= E2P_CMD_BUSY
| E2P_CMD_WRITE
| (offset
& E2P_CMD_ADDR
);
426 ret
= smsc75xx_write_reg(dev
, E2P_CMD
, val
);
428 netdev_warn(dev
->net
, "Error writing E2P_CMD\n");
432 ret
= smsc75xx_wait_eeprom(dev
);
442 static int smsc75xx_dataport_wait_not_busy(struct usbnet
*dev
)
446 for (i
= 0; i
< 100; i
++) {
448 ret
= smsc75xx_read_reg(dev
, DP_SEL
, &dp_sel
);
450 netdev_warn(dev
->net
, "Error reading DP_SEL\n");
454 if (dp_sel
& DP_SEL_DPRDY
)
460 netdev_warn(dev
->net
, "smsc75xx_dataport_wait_not_busy timed out\n");
465 static int smsc75xx_dataport_write(struct usbnet
*dev
, u32 ram_select
, u32 addr
,
466 u32 length
, u32
*buf
)
468 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
472 mutex_lock(&pdata
->dataport_mutex
);
474 ret
= smsc75xx_dataport_wait_not_busy(dev
);
476 netdev_warn(dev
->net
, "smsc75xx_dataport_write busy on entry\n");
480 ret
= smsc75xx_read_reg(dev
, DP_SEL
, &dp_sel
);
482 netdev_warn(dev
->net
, "Error reading DP_SEL\n");
486 dp_sel
&= ~DP_SEL_RSEL
;
487 dp_sel
|= ram_select
;
488 ret
= smsc75xx_write_reg(dev
, DP_SEL
, dp_sel
);
490 netdev_warn(dev
->net
, "Error writing DP_SEL\n");
494 for (i
= 0; i
< length
; i
++) {
495 ret
= smsc75xx_write_reg(dev
, DP_ADDR
, addr
+ i
);
497 netdev_warn(dev
->net
, "Error writing DP_ADDR\n");
501 ret
= smsc75xx_write_reg(dev
, DP_DATA
, buf
[i
]);
503 netdev_warn(dev
->net
, "Error writing DP_DATA\n");
507 ret
= smsc75xx_write_reg(dev
, DP_CMD
, DP_CMD_WRITE
);
509 netdev_warn(dev
->net
, "Error writing DP_CMD\n");
513 ret
= smsc75xx_dataport_wait_not_busy(dev
);
515 netdev_warn(dev
->net
, "smsc75xx_dataport_write timeout\n");
521 mutex_unlock(&pdata
->dataport_mutex
);
525 /* returns hash bit number for given MAC address */
526 static u32
smsc75xx_hash(char addr
[ETH_ALEN
])
528 return (ether_crc(ETH_ALEN
, addr
) >> 23) & 0x1ff;
531 static void smsc75xx_deferred_multicast_write(struct work_struct
*param
)
533 struct smsc75xx_priv
*pdata
=
534 container_of(param
, struct smsc75xx_priv
, set_multicast
);
535 struct usbnet
*dev
= pdata
->dev
;
538 netif_dbg(dev
, drv
, dev
->net
, "deferred multicast write 0x%08x\n",
541 smsc75xx_dataport_write(dev
, DP_SEL_VHF
, DP_SEL_VHF_VLAN_LEN
,
542 DP_SEL_VHF_HASH_LEN
, pdata
->multicast_hash_table
);
544 ret
= smsc75xx_write_reg(dev
, RFE_CTL
, pdata
->rfe_ctl
);
546 netdev_warn(dev
->net
, "Error writing RFE_CRL\n");
549 static void smsc75xx_set_multicast(struct net_device
*netdev
)
551 struct usbnet
*dev
= netdev_priv(netdev
);
552 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
556 spin_lock_irqsave(&pdata
->rfe_ctl_lock
, flags
);
559 ~(RFE_CTL_AU
| RFE_CTL_AM
| RFE_CTL_DPF
| RFE_CTL_MHF
);
560 pdata
->rfe_ctl
|= RFE_CTL_AB
;
562 for (i
= 0; i
< DP_SEL_VHF_HASH_LEN
; i
++)
563 pdata
->multicast_hash_table
[i
] = 0;
565 if (dev
->net
->flags
& IFF_PROMISC
) {
566 netif_dbg(dev
, drv
, dev
->net
, "promiscuous mode enabled\n");
567 pdata
->rfe_ctl
|= RFE_CTL_AM
| RFE_CTL_AU
;
568 } else if (dev
->net
->flags
& IFF_ALLMULTI
) {
569 netif_dbg(dev
, drv
, dev
->net
, "receive all multicast enabled\n");
570 pdata
->rfe_ctl
|= RFE_CTL_AM
| RFE_CTL_DPF
;
571 } else if (!netdev_mc_empty(dev
->net
)) {
572 struct netdev_hw_addr
*ha
;
574 netif_dbg(dev
, drv
, dev
->net
, "receive multicast hash filter\n");
576 pdata
->rfe_ctl
|= RFE_CTL_MHF
| RFE_CTL_DPF
;
578 netdev_for_each_mc_addr(ha
, netdev
) {
579 u32 bitnum
= smsc75xx_hash(ha
->addr
);
580 pdata
->multicast_hash_table
[bitnum
/ 32] |=
581 (1 << (bitnum
% 32));
584 netif_dbg(dev
, drv
, dev
->net
, "receive own packets only\n");
585 pdata
->rfe_ctl
|= RFE_CTL_DPF
;
588 spin_unlock_irqrestore(&pdata
->rfe_ctl_lock
, flags
);
590 /* defer register writes to a sleepable context */
591 schedule_work(&pdata
->set_multicast
);
594 static int smsc75xx_update_flowcontrol(struct usbnet
*dev
, u8 duplex
,
595 u16 lcladv
, u16 rmtadv
)
597 u32 flow
= 0, fct_flow
= 0;
600 if (duplex
== DUPLEX_FULL
) {
601 u8 cap
= mii_resolve_flowctrl_fdx(lcladv
, rmtadv
);
603 if (cap
& FLOW_CTRL_TX
) {
604 flow
= (FLOW_TX_FCEN
| 0xFFFF);
605 /* set fct_flow thresholds to 20% and 80% */
606 fct_flow
= (8 << 8) | 32;
609 if (cap
& FLOW_CTRL_RX
)
610 flow
|= FLOW_RX_FCEN
;
612 netif_dbg(dev
, link
, dev
->net
, "rx pause %s, tx pause %s\n",
613 (cap
& FLOW_CTRL_RX
? "enabled" : "disabled"),
614 (cap
& FLOW_CTRL_TX
? "enabled" : "disabled"));
616 netif_dbg(dev
, link
, dev
->net
, "half duplex\n");
619 ret
= smsc75xx_write_reg(dev
, FLOW
, flow
);
621 netdev_warn(dev
->net
, "Error writing FLOW\n");
625 ret
= smsc75xx_write_reg(dev
, FCT_FLOW
, fct_flow
);
627 netdev_warn(dev
->net
, "Error writing FCT_FLOW\n");
634 static int smsc75xx_link_reset(struct usbnet
*dev
)
636 struct mii_if_info
*mii
= &dev
->mii
;
637 struct ethtool_cmd ecmd
= { .cmd
= ETHTOOL_GSET
};
641 /* write to clear phy interrupt status */
642 smsc75xx_mdio_write(dev
->net
, mii
->phy_id
, PHY_INT_SRC
,
643 PHY_INT_SRC_CLEAR_ALL
);
645 ret
= smsc75xx_write_reg(dev
, INT_STS
, INT_STS_CLEAR_ALL
);
647 netdev_warn(dev
->net
, "Error writing INT_STS\n");
651 mii_check_media(mii
, 1, 1);
652 mii_ethtool_gset(&dev
->mii
, &ecmd
);
653 lcladv
= smsc75xx_mdio_read(dev
->net
, mii
->phy_id
, MII_ADVERTISE
);
654 rmtadv
= smsc75xx_mdio_read(dev
->net
, mii
->phy_id
, MII_LPA
);
656 netif_dbg(dev
, link
, dev
->net
, "speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n",
657 ethtool_cmd_speed(&ecmd
), ecmd
.duplex
, lcladv
, rmtadv
);
659 return smsc75xx_update_flowcontrol(dev
, ecmd
.duplex
, lcladv
, rmtadv
);
662 static void smsc75xx_status(struct usbnet
*dev
, struct urb
*urb
)
666 if (urb
->actual_length
!= 4) {
667 netdev_warn(dev
->net
, "unexpected urb length %d\n",
672 memcpy(&intdata
, urb
->transfer_buffer
, 4);
673 le32_to_cpus(&intdata
);
675 netif_dbg(dev
, link
, dev
->net
, "intdata: 0x%08X\n", intdata
);
677 if (intdata
& INT_ENP_PHY_INT
)
678 usbnet_defer_kevent(dev
, EVENT_LINK_RESET
);
680 netdev_warn(dev
->net
, "unexpected interrupt, intdata=0x%08X\n",
684 static int smsc75xx_ethtool_get_eeprom_len(struct net_device
*net
)
686 return MAX_EEPROM_SIZE
;
689 static int smsc75xx_ethtool_get_eeprom(struct net_device
*netdev
,
690 struct ethtool_eeprom
*ee
, u8
*data
)
692 struct usbnet
*dev
= netdev_priv(netdev
);
694 ee
->magic
= LAN75XX_EEPROM_MAGIC
;
696 return smsc75xx_read_eeprom(dev
, ee
->offset
, ee
->len
, data
);
699 static int smsc75xx_ethtool_set_eeprom(struct net_device
*netdev
,
700 struct ethtool_eeprom
*ee
, u8
*data
)
702 struct usbnet
*dev
= netdev_priv(netdev
);
704 if (ee
->magic
!= LAN75XX_EEPROM_MAGIC
) {
705 netdev_warn(dev
->net
, "EEPROM: magic value mismatch: 0x%x\n",
710 return smsc75xx_write_eeprom(dev
, ee
->offset
, ee
->len
, data
);
713 static void smsc75xx_ethtool_get_wol(struct net_device
*net
,
714 struct ethtool_wolinfo
*wolinfo
)
716 struct usbnet
*dev
= netdev_priv(net
);
717 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
719 wolinfo
->supported
= SUPPORTED_WAKE
;
720 wolinfo
->wolopts
= pdata
->wolopts
;
723 static int smsc75xx_ethtool_set_wol(struct net_device
*net
,
724 struct ethtool_wolinfo
*wolinfo
)
726 struct usbnet
*dev
= netdev_priv(net
);
727 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
730 pdata
->wolopts
= wolinfo
->wolopts
& SUPPORTED_WAKE
;
732 ret
= device_set_wakeup_enable(&dev
->udev
->dev
, pdata
->wolopts
);
734 netdev_warn(dev
->net
, "device_set_wakeup_enable error %d\n", ret
);
739 static const struct ethtool_ops smsc75xx_ethtool_ops
= {
740 .get_link
= usbnet_get_link
,
741 .nway_reset
= usbnet_nway_reset
,
742 .get_drvinfo
= usbnet_get_drvinfo
,
743 .get_msglevel
= usbnet_get_msglevel
,
744 .set_msglevel
= usbnet_set_msglevel
,
745 .get_settings
= usbnet_get_settings
,
746 .set_settings
= usbnet_set_settings
,
747 .get_eeprom_len
= smsc75xx_ethtool_get_eeprom_len
,
748 .get_eeprom
= smsc75xx_ethtool_get_eeprom
,
749 .set_eeprom
= smsc75xx_ethtool_set_eeprom
,
750 .get_wol
= smsc75xx_ethtool_get_wol
,
751 .set_wol
= smsc75xx_ethtool_set_wol
,
754 static int smsc75xx_ioctl(struct net_device
*netdev
, struct ifreq
*rq
, int cmd
)
756 struct usbnet
*dev
= netdev_priv(netdev
);
758 if (!netif_running(netdev
))
761 return generic_mii_ioctl(&dev
->mii
, if_mii(rq
), cmd
, NULL
);
764 static void smsc75xx_init_mac_address(struct usbnet
*dev
)
766 /* try reading mac address from EEPROM */
767 if (smsc75xx_read_eeprom(dev
, EEPROM_MAC_OFFSET
, ETH_ALEN
,
768 dev
->net
->dev_addr
) == 0) {
769 if (is_valid_ether_addr(dev
->net
->dev_addr
)) {
770 /* eeprom values are valid so use them */
771 netif_dbg(dev
, ifup
, dev
->net
,
772 "MAC address read from EEPROM\n");
777 /* no eeprom, or eeprom values are invalid. generate random MAC */
778 eth_hw_addr_random(dev
->net
);
779 netif_dbg(dev
, ifup
, dev
->net
, "MAC address set to eth_random_addr\n");
782 static int smsc75xx_set_mac_address(struct usbnet
*dev
)
784 u32 addr_lo
= dev
->net
->dev_addr
[0] | dev
->net
->dev_addr
[1] << 8 |
785 dev
->net
->dev_addr
[2] << 16 | dev
->net
->dev_addr
[3] << 24;
786 u32 addr_hi
= dev
->net
->dev_addr
[4] | dev
->net
->dev_addr
[5] << 8;
788 int ret
= smsc75xx_write_reg(dev
, RX_ADDRH
, addr_hi
);
790 netdev_warn(dev
->net
, "Failed to write RX_ADDRH: %d\n", ret
);
794 ret
= smsc75xx_write_reg(dev
, RX_ADDRL
, addr_lo
);
796 netdev_warn(dev
->net
, "Failed to write RX_ADDRL: %d\n", ret
);
800 addr_hi
|= ADDR_FILTX_FB_VALID
;
801 ret
= smsc75xx_write_reg(dev
, ADDR_FILTX
, addr_hi
);
803 netdev_warn(dev
->net
, "Failed to write ADDR_FILTX: %d\n", ret
);
807 ret
= smsc75xx_write_reg(dev
, ADDR_FILTX
+ 4, addr_lo
);
809 netdev_warn(dev
->net
, "Failed to write ADDR_FILTX+4: %d\n", ret
);
814 static int smsc75xx_phy_initialize(struct usbnet
*dev
)
816 int bmcr
, ret
, timeout
= 0;
818 /* Initialize MII structure */
819 dev
->mii
.dev
= dev
->net
;
820 dev
->mii
.mdio_read
= smsc75xx_mdio_read
;
821 dev
->mii
.mdio_write
= smsc75xx_mdio_write
;
822 dev
->mii
.phy_id_mask
= 0x1f;
823 dev
->mii
.reg_num_mask
= 0x1f;
824 dev
->mii
.supports_gmii
= 1;
825 dev
->mii
.phy_id
= SMSC75XX_INTERNAL_PHY_ID
;
827 /* reset phy and wait for reset to complete */
828 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, MII_BMCR
, BMCR_RESET
);
832 bmcr
= smsc75xx_mdio_read(dev
->net
, dev
->mii
.phy_id
, MII_BMCR
);
834 netdev_warn(dev
->net
, "Error reading MII_BMCR\n");
838 } while ((bmcr
& BMCR_RESET
) && (timeout
< 100));
840 if (timeout
>= 100) {
841 netdev_warn(dev
->net
, "timeout on PHY Reset\n");
845 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, MII_ADVERTISE
,
846 ADVERTISE_ALL
| ADVERTISE_CSMA
| ADVERTISE_PAUSE_CAP
|
847 ADVERTISE_PAUSE_ASYM
);
848 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, MII_CTRL1000
,
851 /* read and write to clear phy interrupt status */
852 ret
= smsc75xx_mdio_read(dev
->net
, dev
->mii
.phy_id
, PHY_INT_SRC
);
854 netdev_warn(dev
->net
, "Error reading PHY_INT_SRC\n");
858 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, PHY_INT_SRC
, 0xffff);
860 smsc75xx_mdio_write(dev
->net
, dev
->mii
.phy_id
, PHY_INT_MASK
,
861 PHY_INT_MASK_DEFAULT
);
862 mii_nway_restart(&dev
->mii
);
864 netif_dbg(dev
, ifup
, dev
->net
, "phy initialised successfully\n");
868 static int smsc75xx_set_rx_max_frame_length(struct usbnet
*dev
, int size
)
874 ret
= smsc75xx_read_reg(dev
, MAC_RX
, &buf
);
876 netdev_warn(dev
->net
, "Failed to read MAC_RX: %d\n", ret
);
880 rxenabled
= ((buf
& MAC_RX_RXEN
) != 0);
884 ret
= smsc75xx_write_reg(dev
, MAC_RX
, buf
);
886 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
891 /* add 4 to size for FCS */
892 buf
&= ~MAC_RX_MAX_SIZE
;
893 buf
|= (((size
+ 4) << MAC_RX_MAX_SIZE_SHIFT
) & MAC_RX_MAX_SIZE
);
895 ret
= smsc75xx_write_reg(dev
, MAC_RX
, buf
);
897 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
903 ret
= smsc75xx_write_reg(dev
, MAC_RX
, buf
);
905 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
913 static int smsc75xx_change_mtu(struct net_device
*netdev
, int new_mtu
)
915 struct usbnet
*dev
= netdev_priv(netdev
);
918 if (new_mtu
> MAX_SINGLE_PACKET_SIZE
)
921 ret
= smsc75xx_set_rx_max_frame_length(dev
, new_mtu
+ ETH_HLEN
);
923 netdev_warn(dev
->net
, "Failed to set mac rx frame length\n");
927 return usbnet_change_mtu(netdev
, new_mtu
);
930 /* Enable or disable Rx checksum offload engine */
931 static int smsc75xx_set_features(struct net_device
*netdev
,
932 netdev_features_t features
)
934 struct usbnet
*dev
= netdev_priv(netdev
);
935 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
939 spin_lock_irqsave(&pdata
->rfe_ctl_lock
, flags
);
941 if (features
& NETIF_F_RXCSUM
)
942 pdata
->rfe_ctl
|= RFE_CTL_TCPUDP_CKM
| RFE_CTL_IP_CKM
;
944 pdata
->rfe_ctl
&= ~(RFE_CTL_TCPUDP_CKM
| RFE_CTL_IP_CKM
);
946 spin_unlock_irqrestore(&pdata
->rfe_ctl_lock
, flags
);
947 /* it's racing here! */
949 ret
= smsc75xx_write_reg(dev
, RFE_CTL
, pdata
->rfe_ctl
);
951 netdev_warn(dev
->net
, "Error writing RFE_CTL\n");
956 static int smsc75xx_wait_ready(struct usbnet
*dev
, int in_pm
)
964 ret
= __smsc75xx_read_reg(dev
, PMT_CTL
, &buf
, in_pm
);
967 netdev_warn(dev
->net
, "Failed to read PMT_CTL: %d\n", ret
);
971 if (buf
& PMT_CTL_DEV_RDY
)
976 } while (timeout
< 100);
978 netdev_warn(dev
->net
, "timeout waiting for device ready\n");
982 static int smsc75xx_reset(struct usbnet
*dev
)
984 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
986 int ret
= 0, timeout
;
988 netif_dbg(dev
, ifup
, dev
->net
, "entering smsc75xx_reset\n");
990 ret
= smsc75xx_wait_ready(dev
, 0);
992 netdev_warn(dev
->net
, "device not ready in smsc75xx_reset\n");
996 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
998 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1004 ret
= smsc75xx_write_reg(dev
, HW_CFG
, buf
);
1006 netdev_warn(dev
->net
, "Failed to write HW_CFG: %d\n", ret
);
1013 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1015 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1019 } while ((buf
& HW_CFG_LRST
) && (timeout
< 100));
1021 if (timeout
>= 100) {
1022 netdev_warn(dev
->net
, "timeout on completion of Lite Reset\n");
1026 netif_dbg(dev
, ifup
, dev
->net
, "Lite reset complete, resetting PHY\n");
1028 ret
= smsc75xx_read_reg(dev
, PMT_CTL
, &buf
);
1030 netdev_warn(dev
->net
, "Failed to read PMT_CTL: %d\n", ret
);
1034 buf
|= PMT_CTL_PHY_RST
;
1036 ret
= smsc75xx_write_reg(dev
, PMT_CTL
, buf
);
1038 netdev_warn(dev
->net
, "Failed to write PMT_CTL: %d\n", ret
);
1045 ret
= smsc75xx_read_reg(dev
, PMT_CTL
, &buf
);
1047 netdev_warn(dev
->net
, "Failed to read PMT_CTL: %d\n", ret
);
1051 } while ((buf
& PMT_CTL_PHY_RST
) && (timeout
< 100));
1053 if (timeout
>= 100) {
1054 netdev_warn(dev
->net
, "timeout waiting for PHY Reset\n");
1058 netif_dbg(dev
, ifup
, dev
->net
, "PHY reset complete\n");
1060 ret
= smsc75xx_set_mac_address(dev
);
1062 netdev_warn(dev
->net
, "Failed to set mac address\n");
1066 netif_dbg(dev
, ifup
, dev
->net
, "MAC Address: %pM\n",
1067 dev
->net
->dev_addr
);
1069 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1071 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1075 netif_dbg(dev
, ifup
, dev
->net
, "Read Value from HW_CFG : 0x%08x\n",
1080 ret
= smsc75xx_write_reg(dev
, HW_CFG
, buf
);
1082 netdev_warn(dev
->net
, "Failed to write HW_CFG: %d\n", ret
);
1086 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1088 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1092 netif_dbg(dev
, ifup
, dev
->net
, "Read Value from HW_CFG after writing HW_CFG_BIR: 0x%08x\n",
1097 dev
->rx_urb_size
= MAX_SINGLE_PACKET_SIZE
;
1098 } else if (dev
->udev
->speed
== USB_SPEED_HIGH
) {
1099 buf
= DEFAULT_HS_BURST_CAP_SIZE
/ HS_USB_PKT_SIZE
;
1100 dev
->rx_urb_size
= DEFAULT_HS_BURST_CAP_SIZE
;
1102 buf
= DEFAULT_FS_BURST_CAP_SIZE
/ FS_USB_PKT_SIZE
;
1103 dev
->rx_urb_size
= DEFAULT_FS_BURST_CAP_SIZE
;
1106 netif_dbg(dev
, ifup
, dev
->net
, "rx_urb_size=%ld\n",
1107 (ulong
)dev
->rx_urb_size
);
1109 ret
= smsc75xx_write_reg(dev
, BURST_CAP
, buf
);
1111 netdev_warn(dev
->net
, "Failed to write BURST_CAP: %d\n", ret
);
1115 ret
= smsc75xx_read_reg(dev
, BURST_CAP
, &buf
);
1117 netdev_warn(dev
->net
, "Failed to read BURST_CAP: %d\n", ret
);
1121 netif_dbg(dev
, ifup
, dev
->net
,
1122 "Read Value from BURST_CAP after writing: 0x%08x\n", buf
);
1124 ret
= smsc75xx_write_reg(dev
, BULK_IN_DLY
, DEFAULT_BULK_IN_DELAY
);
1126 netdev_warn(dev
->net
, "Failed to write BULK_IN_DLY: %d\n", ret
);
1130 ret
= smsc75xx_read_reg(dev
, BULK_IN_DLY
, &buf
);
1132 netdev_warn(dev
->net
, "Failed to read BULK_IN_DLY: %d\n", ret
);
1136 netif_dbg(dev
, ifup
, dev
->net
,
1137 "Read Value from BULK_IN_DLY after writing: 0x%08x\n", buf
);
1140 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1142 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1146 netif_dbg(dev
, ifup
, dev
->net
, "HW_CFG: 0x%08x\n", buf
);
1148 buf
|= (HW_CFG_MEF
| HW_CFG_BCE
);
1150 ret
= smsc75xx_write_reg(dev
, HW_CFG
, buf
);
1152 netdev_warn(dev
->net
, "Failed to write HW_CFG: %d\n", ret
);
1156 ret
= smsc75xx_read_reg(dev
, HW_CFG
, &buf
);
1158 netdev_warn(dev
->net
, "Failed to read HW_CFG: %d\n", ret
);
1162 netif_dbg(dev
, ifup
, dev
->net
, "HW_CFG: 0x%08x\n", buf
);
1165 /* set FIFO sizes */
1166 buf
= (MAX_RX_FIFO_SIZE
- 512) / 512;
1167 ret
= smsc75xx_write_reg(dev
, FCT_RX_FIFO_END
, buf
);
1169 netdev_warn(dev
->net
, "Failed to write FCT_RX_FIFO_END: %d\n", ret
);
1173 netif_dbg(dev
, ifup
, dev
->net
, "FCT_RX_FIFO_END set to 0x%08x\n", buf
);
1175 buf
= (MAX_TX_FIFO_SIZE
- 512) / 512;
1176 ret
= smsc75xx_write_reg(dev
, FCT_TX_FIFO_END
, buf
);
1178 netdev_warn(dev
->net
, "Failed to write FCT_TX_FIFO_END: %d\n", ret
);
1182 netif_dbg(dev
, ifup
, dev
->net
, "FCT_TX_FIFO_END set to 0x%08x\n", buf
);
1184 ret
= smsc75xx_write_reg(dev
, INT_STS
, INT_STS_CLEAR_ALL
);
1186 netdev_warn(dev
->net
, "Failed to write INT_STS: %d\n", ret
);
1190 ret
= smsc75xx_read_reg(dev
, ID_REV
, &buf
);
1192 netdev_warn(dev
->net
, "Failed to read ID_REV: %d\n", ret
);
1196 netif_dbg(dev
, ifup
, dev
->net
, "ID_REV = 0x%08x\n", buf
);
1198 ret
= smsc75xx_read_reg(dev
, E2P_CMD
, &buf
);
1200 netdev_warn(dev
->net
, "Failed to read E2P_CMD: %d\n", ret
);
1204 /* only set default GPIO/LED settings if no EEPROM is detected */
1205 if (!(buf
& E2P_CMD_LOADED
)) {
1206 ret
= smsc75xx_read_reg(dev
, LED_GPIO_CFG
, &buf
);
1208 netdev_warn(dev
->net
, "Failed to read LED_GPIO_CFG: %d\n", ret
);
1212 buf
&= ~(LED_GPIO_CFG_LED2_FUN_SEL
| LED_GPIO_CFG_LED10_FUN_SEL
);
1213 buf
|= LED_GPIO_CFG_LEDGPIO_EN
| LED_GPIO_CFG_LED2_FUN_SEL
;
1215 ret
= smsc75xx_write_reg(dev
, LED_GPIO_CFG
, buf
);
1217 netdev_warn(dev
->net
, "Failed to write LED_GPIO_CFG: %d\n", ret
);
1222 ret
= smsc75xx_write_reg(dev
, FLOW
, 0);
1224 netdev_warn(dev
->net
, "Failed to write FLOW: %d\n", ret
);
1228 ret
= smsc75xx_write_reg(dev
, FCT_FLOW
, 0);
1230 netdev_warn(dev
->net
, "Failed to write FCT_FLOW: %d\n", ret
);
1234 /* Don't need rfe_ctl_lock during initialisation */
1235 ret
= smsc75xx_read_reg(dev
, RFE_CTL
, &pdata
->rfe_ctl
);
1237 netdev_warn(dev
->net
, "Failed to read RFE_CTL: %d\n", ret
);
1241 pdata
->rfe_ctl
|= RFE_CTL_AB
| RFE_CTL_DPF
;
1243 ret
= smsc75xx_write_reg(dev
, RFE_CTL
, pdata
->rfe_ctl
);
1245 netdev_warn(dev
->net
, "Failed to write RFE_CTL: %d\n", ret
);
1249 ret
= smsc75xx_read_reg(dev
, RFE_CTL
, &pdata
->rfe_ctl
);
1251 netdev_warn(dev
->net
, "Failed to read RFE_CTL: %d\n", ret
);
1255 netif_dbg(dev
, ifup
, dev
->net
, "RFE_CTL set to 0x%08x\n",
1258 /* Enable or disable checksum offload engines */
1259 smsc75xx_set_features(dev
->net
, dev
->net
->features
);
1261 smsc75xx_set_multicast(dev
->net
);
1263 ret
= smsc75xx_phy_initialize(dev
);
1265 netdev_warn(dev
->net
, "Failed to initialize PHY: %d\n", ret
);
1269 ret
= smsc75xx_read_reg(dev
, INT_EP_CTL
, &buf
);
1271 netdev_warn(dev
->net
, "Failed to read INT_EP_CTL: %d\n", ret
);
1275 /* enable PHY interrupts */
1276 buf
|= INT_ENP_PHY_INT
;
1278 ret
= smsc75xx_write_reg(dev
, INT_EP_CTL
, buf
);
1280 netdev_warn(dev
->net
, "Failed to write INT_EP_CTL: %d\n", ret
);
1284 /* allow mac to detect speed and duplex from phy */
1285 ret
= smsc75xx_read_reg(dev
, MAC_CR
, &buf
);
1287 netdev_warn(dev
->net
, "Failed to read MAC_CR: %d\n", ret
);
1291 buf
|= (MAC_CR_ADD
| MAC_CR_ASD
);
1292 ret
= smsc75xx_write_reg(dev
, MAC_CR
, buf
);
1294 netdev_warn(dev
->net
, "Failed to write MAC_CR: %d\n", ret
);
1298 ret
= smsc75xx_read_reg(dev
, MAC_TX
, &buf
);
1300 netdev_warn(dev
->net
, "Failed to read MAC_TX: %d\n", ret
);
1306 ret
= smsc75xx_write_reg(dev
, MAC_TX
, buf
);
1308 netdev_warn(dev
->net
, "Failed to write MAC_TX: %d\n", ret
);
1312 netif_dbg(dev
, ifup
, dev
->net
, "MAC_TX set to 0x%08x\n", buf
);
1314 ret
= smsc75xx_read_reg(dev
, FCT_TX_CTL
, &buf
);
1316 netdev_warn(dev
->net
, "Failed to read FCT_TX_CTL: %d\n", ret
);
1320 buf
|= FCT_TX_CTL_EN
;
1322 ret
= smsc75xx_write_reg(dev
, FCT_TX_CTL
, buf
);
1324 netdev_warn(dev
->net
, "Failed to write FCT_TX_CTL: %d\n", ret
);
1328 netif_dbg(dev
, ifup
, dev
->net
, "FCT_TX_CTL set to 0x%08x\n", buf
);
1330 ret
= smsc75xx_set_rx_max_frame_length(dev
, dev
->net
->mtu
+ ETH_HLEN
);
1332 netdev_warn(dev
->net
, "Failed to set max rx frame length\n");
1336 ret
= smsc75xx_read_reg(dev
, MAC_RX
, &buf
);
1338 netdev_warn(dev
->net
, "Failed to read MAC_RX: %d\n", ret
);
1344 ret
= smsc75xx_write_reg(dev
, MAC_RX
, buf
);
1346 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
1350 netif_dbg(dev
, ifup
, dev
->net
, "MAC_RX set to 0x%08x\n", buf
);
1352 ret
= smsc75xx_read_reg(dev
, FCT_RX_CTL
, &buf
);
1354 netdev_warn(dev
->net
, "Failed to read FCT_RX_CTL: %d\n", ret
);
1358 buf
|= FCT_RX_CTL_EN
;
1360 ret
= smsc75xx_write_reg(dev
, FCT_RX_CTL
, buf
);
1362 netdev_warn(dev
->net
, "Failed to write FCT_RX_CTL: %d\n", ret
);
1366 netif_dbg(dev
, ifup
, dev
->net
, "FCT_RX_CTL set to 0x%08x\n", buf
);
1368 netif_dbg(dev
, ifup
, dev
->net
, "smsc75xx_reset, return 0\n");
1372 static const struct net_device_ops smsc75xx_netdev_ops
= {
1373 .ndo_open
= usbnet_open
,
1374 .ndo_stop
= usbnet_stop
,
1375 .ndo_start_xmit
= usbnet_start_xmit
,
1376 .ndo_tx_timeout
= usbnet_tx_timeout
,
1377 .ndo_change_mtu
= smsc75xx_change_mtu
,
1378 .ndo_set_mac_address
= eth_mac_addr
,
1379 .ndo_validate_addr
= eth_validate_addr
,
1380 .ndo_do_ioctl
= smsc75xx_ioctl
,
1381 .ndo_set_rx_mode
= smsc75xx_set_multicast
,
1382 .ndo_set_features
= smsc75xx_set_features
,
1385 static int smsc75xx_bind(struct usbnet
*dev
, struct usb_interface
*intf
)
1387 struct smsc75xx_priv
*pdata
= NULL
;
1390 printk(KERN_INFO SMSC_CHIPNAME
" v" SMSC_DRIVER_VERSION
"\n");
1392 ret
= usbnet_get_endpoints(dev
, intf
);
1394 netdev_warn(dev
->net
, "usbnet_get_endpoints failed: %d\n", ret
);
1398 dev
->data
[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv
),
1401 pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1407 spin_lock_init(&pdata
->rfe_ctl_lock
);
1408 mutex_init(&pdata
->dataport_mutex
);
1410 INIT_WORK(&pdata
->set_multicast
, smsc75xx_deferred_multicast_write
);
1412 if (DEFAULT_TX_CSUM_ENABLE
)
1413 dev
->net
->features
|= NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
;
1415 if (DEFAULT_RX_CSUM_ENABLE
)
1416 dev
->net
->features
|= NETIF_F_RXCSUM
;
1418 dev
->net
->hw_features
= NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
|
1421 ret
= smsc75xx_wait_ready(dev
, 0);
1423 netdev_warn(dev
->net
, "device not ready in smsc75xx_bind\n");
1427 smsc75xx_init_mac_address(dev
);
1429 /* Init all registers */
1430 ret
= smsc75xx_reset(dev
);
1432 netdev_warn(dev
->net
, "smsc75xx_reset error %d\n", ret
);
1436 dev
->net
->netdev_ops
= &smsc75xx_netdev_ops
;
1437 dev
->net
->ethtool_ops
= &smsc75xx_ethtool_ops
;
1438 dev
->net
->flags
|= IFF_MULTICAST
;
1439 dev
->net
->hard_header_len
+= SMSC75XX_TX_OVERHEAD
;
1440 dev
->hard_mtu
= dev
->net
->mtu
+ dev
->net
->hard_header_len
;
1444 static void smsc75xx_unbind(struct usbnet
*dev
, struct usb_interface
*intf
)
1446 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1448 netif_dbg(dev
, ifdown
, dev
->net
, "free pdata\n");
1455 static u16
smsc_crc(const u8
*buffer
, size_t len
)
1457 return bitrev16(crc16(0xFFFF, buffer
, len
));
1460 static int smsc75xx_write_wuff(struct usbnet
*dev
, int filter
, u32 wuf_cfg
,
1463 int cfg_base
= WUF_CFGX
+ filter
* 4;
1464 int mask_base
= WUF_MASKX
+ filter
* 16;
1467 ret
= smsc75xx_write_reg(dev
, cfg_base
, wuf_cfg
);
1469 netdev_warn(dev
->net
, "Error writing WUF_CFGX\n");
1473 ret
= smsc75xx_write_reg(dev
, mask_base
, wuf_mask1
);
1475 netdev_warn(dev
->net
, "Error writing WUF_MASKX\n");
1479 ret
= smsc75xx_write_reg(dev
, mask_base
+ 4, 0);
1481 netdev_warn(dev
->net
, "Error writing WUF_MASKX\n");
1485 ret
= smsc75xx_write_reg(dev
, mask_base
+ 8, 0);
1487 netdev_warn(dev
->net
, "Error writing WUF_MASKX\n");
1491 ret
= smsc75xx_write_reg(dev
, mask_base
+ 12, 0);
1493 netdev_warn(dev
->net
, "Error writing WUF_MASKX\n");
1500 static int smsc75xx_enter_suspend0(struct usbnet
*dev
)
1502 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1506 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1508 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1512 val
&= (~(PMT_CTL_SUS_MODE
| PMT_CTL_PHY_RST
));
1513 val
|= PMT_CTL_SUS_MODE_0
| PMT_CTL_WOL_EN
| PMT_CTL_WUPS
;
1515 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1517 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1521 pdata
->suspend_flags
|= SUSPEND_SUSPEND0
;
1526 static int smsc75xx_enter_suspend1(struct usbnet
*dev
)
1528 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1532 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1534 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1538 val
&= ~(PMT_CTL_SUS_MODE
| PMT_CTL_WUPS
| PMT_CTL_PHY_RST
);
1539 val
|= PMT_CTL_SUS_MODE_1
;
1541 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1543 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1547 /* clear wol status, enable energy detection */
1548 val
&= ~PMT_CTL_WUPS
;
1549 val
|= (PMT_CTL_WUPS_ED
| PMT_CTL_ED_EN
);
1551 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1553 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1557 pdata
->suspend_flags
|= SUSPEND_SUSPEND1
;
1562 static int smsc75xx_enter_suspend2(struct usbnet
*dev
)
1564 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1568 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1570 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1574 val
&= ~(PMT_CTL_SUS_MODE
| PMT_CTL_WUPS
| PMT_CTL_PHY_RST
);
1575 val
|= PMT_CTL_SUS_MODE_2
;
1577 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1579 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1583 pdata
->suspend_flags
|= SUSPEND_SUSPEND2
;
1588 static int smsc75xx_enter_suspend3(struct usbnet
*dev
)
1590 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1594 ret
= smsc75xx_read_reg_nopm(dev
, FCT_RX_CTL
, &val
);
1596 netdev_warn(dev
->net
, "Error reading FCT_RX_CTL\n");
1600 if (val
& FCT_RX_CTL_RXUSED
) {
1601 netdev_dbg(dev
->net
, "rx fifo not empty in autosuspend\n");
1605 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1607 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1611 val
&= ~(PMT_CTL_SUS_MODE
| PMT_CTL_WUPS
| PMT_CTL_PHY_RST
);
1612 val
|= PMT_CTL_SUS_MODE_3
| PMT_CTL_RES_CLR_WKP_EN
;
1614 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1616 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1620 /* clear wol status */
1621 val
&= ~PMT_CTL_WUPS
;
1622 val
|= PMT_CTL_WUPS_WOL
;
1624 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1626 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1630 pdata
->suspend_flags
|= SUSPEND_SUSPEND3
;
1635 static int smsc75xx_enable_phy_wakeup_interrupts(struct usbnet
*dev
, u16 mask
)
1637 struct mii_if_info
*mii
= &dev
->mii
;
1640 netdev_dbg(dev
->net
, "enabling PHY wakeup interrupts\n");
1643 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
, PHY_INT_SRC
);
1645 netdev_warn(dev
->net
, "Error reading PHY_INT_SRC\n");
1649 /* enable interrupt source */
1650 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
, PHY_INT_MASK
);
1652 netdev_warn(dev
->net
, "Error reading PHY_INT_MASK\n");
1658 smsc75xx_mdio_write_nopm(dev
->net
, mii
->phy_id
, PHY_INT_MASK
, ret
);
1663 static int smsc75xx_link_ok_nopm(struct usbnet
*dev
)
1665 struct mii_if_info
*mii
= &dev
->mii
;
1668 /* first, a dummy read, needed to latch some MII phys */
1669 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
, MII_BMSR
);
1671 netdev_warn(dev
->net
, "Error reading MII_BMSR\n");
1675 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
, MII_BMSR
);
1677 netdev_warn(dev
->net
, "Error reading MII_BMSR\n");
1681 return !!(ret
& BMSR_LSTATUS
);
1684 static int smsc75xx_autosuspend(struct usbnet
*dev
, u32 link_up
)
1688 if (!netif_running(dev
->net
)) {
1689 /* interface is ifconfig down so fully power down hw */
1690 netdev_dbg(dev
->net
, "autosuspend entering SUSPEND2\n");
1691 return smsc75xx_enter_suspend2(dev
);
1695 /* link is down so enter EDPD mode */
1696 netdev_dbg(dev
->net
, "autosuspend entering SUSPEND1\n");
1698 /* enable PHY wakeup events for if cable is attached */
1699 ret
= smsc75xx_enable_phy_wakeup_interrupts(dev
,
1700 PHY_INT_MASK_ANEG_COMP
);
1702 netdev_warn(dev
->net
, "error enabling PHY wakeup ints\n");
1706 netdev_info(dev
->net
, "entering SUSPEND1 mode\n");
1707 return smsc75xx_enter_suspend1(dev
);
1710 /* enable PHY wakeup events so we remote wakeup if cable is pulled */
1711 ret
= smsc75xx_enable_phy_wakeup_interrupts(dev
,
1712 PHY_INT_MASK_LINK_DOWN
);
1714 netdev_warn(dev
->net
, "error enabling PHY wakeup ints\n");
1718 netdev_dbg(dev
->net
, "autosuspend entering SUSPEND3\n");
1719 return smsc75xx_enter_suspend3(dev
);
1722 static int smsc75xx_suspend(struct usb_interface
*intf
, pm_message_t message
)
1724 struct usbnet
*dev
= usb_get_intfdata(intf
);
1725 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
1729 ret
= usbnet_suspend(intf
, message
);
1731 netdev_warn(dev
->net
, "usbnet_suspend error\n");
1735 if (pdata
->suspend_flags
) {
1736 netdev_warn(dev
->net
, "error during last resume\n");
1737 pdata
->suspend_flags
= 0;
1740 /* determine if link is up using only _nopm functions */
1741 link_up
= smsc75xx_link_ok_nopm(dev
);
1743 if (message
.event
== PM_EVENT_AUTO_SUSPEND
) {
1744 ret
= smsc75xx_autosuspend(dev
, link_up
);
1748 /* if we get this far we're not autosuspending */
1749 /* if no wol options set, or if link is down and we're not waking on
1750 * PHY activity, enter lowest power SUSPEND2 mode
1752 if (!(pdata
->wolopts
& SUPPORTED_WAKE
) ||
1753 !(link_up
|| (pdata
->wolopts
& WAKE_PHY
))) {
1754 netdev_info(dev
->net
, "entering SUSPEND2 mode\n");
1756 /* disable energy detect (link up) & wake up events */
1757 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1759 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1763 val
&= ~(WUCSR_MPEN
| WUCSR_WUEN
);
1765 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1767 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1771 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1773 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1777 val
&= ~(PMT_CTL_ED_EN
| PMT_CTL_WOL_EN
);
1779 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1781 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1785 ret
= smsc75xx_enter_suspend2(dev
);
1789 if (pdata
->wolopts
& WAKE_PHY
) {
1790 ret
= smsc75xx_enable_phy_wakeup_interrupts(dev
,
1791 (PHY_INT_MASK_ANEG_COMP
| PHY_INT_MASK_LINK_DOWN
));
1793 netdev_warn(dev
->net
, "error enabling PHY wakeup ints\n");
1797 /* if link is down then configure EDPD and enter SUSPEND1,
1798 * otherwise enter SUSPEND0 below
1801 struct mii_if_info
*mii
= &dev
->mii
;
1802 netdev_info(dev
->net
, "entering SUSPEND1 mode\n");
1804 /* enable energy detect power-down mode */
1805 ret
= smsc75xx_mdio_read_nopm(dev
->net
, mii
->phy_id
,
1808 netdev_warn(dev
->net
, "Error reading PHY_MODE_CTRL_STS\n");
1812 ret
|= MODE_CTRL_STS_EDPWRDOWN
;
1814 smsc75xx_mdio_write_nopm(dev
->net
, mii
->phy_id
,
1815 PHY_MODE_CTRL_STS
, ret
);
1817 /* enter SUSPEND1 mode */
1818 ret
= smsc75xx_enter_suspend1(dev
);
1823 if (pdata
->wolopts
& (WAKE_MCAST
| WAKE_ARP
)) {
1826 /* disable all filters */
1827 for (i
= 0; i
< WUF_NUM
; i
++) {
1828 ret
= smsc75xx_write_reg_nopm(dev
, WUF_CFGX
+ i
* 4, 0);
1830 netdev_warn(dev
->net
, "Error writing WUF_CFGX\n");
1835 if (pdata
->wolopts
& WAKE_MCAST
) {
1836 const u8 mcast
[] = {0x01, 0x00, 0x5E};
1837 netdev_info(dev
->net
, "enabling multicast detection\n");
1839 val
= WUF_CFGX_EN
| WUF_CFGX_ATYPE_MULTICAST
1840 | smsc_crc(mcast
, 3);
1841 ret
= smsc75xx_write_wuff(dev
, filter
++, val
, 0x0007);
1843 netdev_warn(dev
->net
, "Error writing wakeup filter\n");
1848 if (pdata
->wolopts
& WAKE_ARP
) {
1849 const u8 arp
[] = {0x08, 0x06};
1850 netdev_info(dev
->net
, "enabling ARP detection\n");
1852 val
= WUF_CFGX_EN
| WUF_CFGX_ATYPE_ALL
| (0x0C << 16)
1854 ret
= smsc75xx_write_wuff(dev
, filter
++, val
, 0x0003);
1856 netdev_warn(dev
->net
, "Error writing wakeup filter\n");
1861 /* clear any pending pattern match packet status */
1862 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1864 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1870 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1872 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1876 netdev_info(dev
->net
, "enabling packet match detection\n");
1877 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1879 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1885 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1887 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1891 netdev_info(dev
->net
, "disabling packet match detection\n");
1892 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1894 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1900 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1902 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1907 /* disable magic, bcast & unicast wakeup sources */
1908 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1910 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1914 val
&= ~(WUCSR_MPEN
| WUCSR_BCST_EN
| WUCSR_PFDA_EN
);
1916 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1918 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1922 if (pdata
->wolopts
& WAKE_PHY
) {
1923 netdev_info(dev
->net
, "enabling PHY wakeup\n");
1925 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
1927 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
1931 /* clear wol status, enable energy detection */
1932 val
&= ~PMT_CTL_WUPS
;
1933 val
|= (PMT_CTL_WUPS_ED
| PMT_CTL_ED_EN
);
1935 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
1937 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
1942 if (pdata
->wolopts
& WAKE_MAGIC
) {
1943 netdev_info(dev
->net
, "enabling magic packet wakeup\n");
1944 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1946 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1950 /* clear any pending magic packet status */
1951 val
|= WUCSR_MPR
| WUCSR_MPEN
;
1953 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1955 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1960 if (pdata
->wolopts
& WAKE_BCAST
) {
1961 netdev_info(dev
->net
, "enabling broadcast detection\n");
1962 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1964 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1968 val
|= WUCSR_BCAST_FR
| WUCSR_BCST_EN
;
1970 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1972 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1977 if (pdata
->wolopts
& WAKE_UCAST
) {
1978 netdev_info(dev
->net
, "enabling unicast detection\n");
1979 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
1981 netdev_warn(dev
->net
, "Error reading WUCSR\n");
1985 val
|= WUCSR_WUFR
| WUCSR_PFDA_EN
;
1987 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
1989 netdev_warn(dev
->net
, "Error writing WUCSR\n");
1994 /* enable receiver to enable frame reception */
1995 ret
= smsc75xx_read_reg_nopm(dev
, MAC_RX
, &val
);
1997 netdev_warn(dev
->net
, "Failed to read MAC_RX: %d\n", ret
);
2003 ret
= smsc75xx_write_reg_nopm(dev
, MAC_RX
, val
);
2005 netdev_warn(dev
->net
, "Failed to write MAC_RX: %d\n", ret
);
2009 /* some wol options are enabled, so enter SUSPEND0 */
2010 netdev_info(dev
->net
, "entering SUSPEND0 mode\n");
2011 ret
= smsc75xx_enter_suspend0(dev
);
2015 * TODO: resume() might need to handle the suspend failure
2018 if (ret
&& PMSG_IS_AUTO(message
))
2019 usbnet_resume(intf
);
2023 static int smsc75xx_resume(struct usb_interface
*intf
)
2025 struct usbnet
*dev
= usb_get_intfdata(intf
);
2026 struct smsc75xx_priv
*pdata
= (struct smsc75xx_priv
*)(dev
->data
[0]);
2027 u8 suspend_flags
= pdata
->suspend_flags
;
2031 netdev_dbg(dev
->net
, "resume suspend_flags=0x%02x\n", suspend_flags
);
2033 /* do this first to ensure it's cleared even in error case */
2034 pdata
->suspend_flags
= 0;
2036 if (suspend_flags
& SUSPEND_ALLMODES
) {
2037 /* Disable wakeup sources */
2038 ret
= smsc75xx_read_reg_nopm(dev
, WUCSR
, &val
);
2040 netdev_warn(dev
->net
, "Error reading WUCSR\n");
2044 val
&= ~(WUCSR_WUEN
| WUCSR_MPEN
| WUCSR_PFDA_EN
2047 ret
= smsc75xx_write_reg_nopm(dev
, WUCSR
, val
);
2049 netdev_warn(dev
->net
, "Error writing WUCSR\n");
2053 /* clear wake-up status */
2054 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
2056 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
2060 val
&= ~PMT_CTL_WOL_EN
;
2061 val
|= PMT_CTL_WUPS
;
2063 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
2065 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
2070 if (suspend_flags
& SUSPEND_SUSPEND2
) {
2071 netdev_info(dev
->net
, "resuming from SUSPEND2\n");
2073 ret
= smsc75xx_read_reg_nopm(dev
, PMT_CTL
, &val
);
2075 netdev_warn(dev
->net
, "Error reading PMT_CTL\n");
2079 val
|= PMT_CTL_PHY_PWRUP
;
2081 ret
= smsc75xx_write_reg_nopm(dev
, PMT_CTL
, val
);
2083 netdev_warn(dev
->net
, "Error writing PMT_CTL\n");
2088 ret
= smsc75xx_wait_ready(dev
, 1);
2090 netdev_warn(dev
->net
, "device not ready in smsc75xx_resume\n");
2094 return usbnet_resume(intf
);
2097 static void smsc75xx_rx_csum_offload(struct usbnet
*dev
, struct sk_buff
*skb
,
2098 u32 rx_cmd_a
, u32 rx_cmd_b
)
2100 if (!(dev
->net
->features
& NETIF_F_RXCSUM
) ||
2101 unlikely(rx_cmd_a
& RX_CMD_A_LCSM
)) {
2102 skb
->ip_summed
= CHECKSUM_NONE
;
2104 skb
->csum
= ntohs((u16
)(rx_cmd_b
>> RX_CMD_B_CSUM_SHIFT
));
2105 skb
->ip_summed
= CHECKSUM_COMPLETE
;
2109 static int smsc75xx_rx_fixup(struct usbnet
*dev
, struct sk_buff
*skb
)
2111 /* This check is no longer done by usbnet */
2112 if (skb
->len
< dev
->net
->hard_header_len
)
2115 while (skb
->len
> 0) {
2116 u32 rx_cmd_a
, rx_cmd_b
, align_count
, size
;
2117 struct sk_buff
*ax_skb
;
2118 unsigned char *packet
;
2120 memcpy(&rx_cmd_a
, skb
->data
, sizeof(rx_cmd_a
));
2121 le32_to_cpus(&rx_cmd_a
);
2124 memcpy(&rx_cmd_b
, skb
->data
, sizeof(rx_cmd_b
));
2125 le32_to_cpus(&rx_cmd_b
);
2126 skb_pull(skb
, 4 + RXW_PADDING
);
2130 /* get the packet length */
2131 size
= (rx_cmd_a
& RX_CMD_A_LEN
) - RXW_PADDING
;
2132 align_count
= (4 - ((size
+ RXW_PADDING
) % 4)) % 4;
2134 if (unlikely(rx_cmd_a
& RX_CMD_A_RED
)) {
2135 netif_dbg(dev
, rx_err
, dev
->net
,
2136 "Error rx_cmd_a=0x%08x\n", rx_cmd_a
);
2137 dev
->net
->stats
.rx_errors
++;
2138 dev
->net
->stats
.rx_dropped
++;
2140 if (rx_cmd_a
& RX_CMD_A_FCS
)
2141 dev
->net
->stats
.rx_crc_errors
++;
2142 else if (rx_cmd_a
& (RX_CMD_A_LONG
| RX_CMD_A_RUNT
))
2143 dev
->net
->stats
.rx_frame_errors
++;
2145 /* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */
2146 if (unlikely(size
> (MAX_SINGLE_PACKET_SIZE
+ ETH_HLEN
+ 12))) {
2147 netif_dbg(dev
, rx_err
, dev
->net
,
2148 "size err rx_cmd_a=0x%08x\n",
2153 /* last frame in this batch */
2154 if (skb
->len
== size
) {
2155 smsc75xx_rx_csum_offload(dev
, skb
, rx_cmd_a
,
2158 skb_trim(skb
, skb
->len
- 4); /* remove fcs */
2159 skb
->truesize
= size
+ sizeof(struct sk_buff
);
2164 ax_skb
= skb_clone(skb
, GFP_ATOMIC
);
2165 if (unlikely(!ax_skb
)) {
2166 netdev_warn(dev
->net
, "Error allocating skb\n");
2171 ax_skb
->data
= packet
;
2172 skb_set_tail_pointer(ax_skb
, size
);
2174 smsc75xx_rx_csum_offload(dev
, ax_skb
, rx_cmd_a
,
2177 skb_trim(ax_skb
, ax_skb
->len
- 4); /* remove fcs */
2178 ax_skb
->truesize
= size
+ sizeof(struct sk_buff
);
2180 usbnet_skb_return(dev
, ax_skb
);
2183 skb_pull(skb
, size
);
2185 /* padding bytes before the next frame starts */
2187 skb_pull(skb
, align_count
);
2190 if (unlikely(skb
->len
< 0)) {
2191 netdev_warn(dev
->net
, "invalid rx length<0 %d\n", skb
->len
);
2198 static struct sk_buff
*smsc75xx_tx_fixup(struct usbnet
*dev
,
2199 struct sk_buff
*skb
, gfp_t flags
)
2201 u32 tx_cmd_a
, tx_cmd_b
;
2203 if (skb_headroom(skb
) < SMSC75XX_TX_OVERHEAD
) {
2204 struct sk_buff
*skb2
=
2205 skb_copy_expand(skb
, SMSC75XX_TX_OVERHEAD
, 0, flags
);
2206 dev_kfree_skb_any(skb
);
2212 tx_cmd_a
= (u32
)(skb
->len
& TX_CMD_A_LEN
) | TX_CMD_A_FCS
;
2214 if (skb
->ip_summed
== CHECKSUM_PARTIAL
)
2215 tx_cmd_a
|= TX_CMD_A_IPE
| TX_CMD_A_TPE
;
2217 if (skb_is_gso(skb
)) {
2218 u16 mss
= max(skb_shinfo(skb
)->gso_size
, TX_MSS_MIN
);
2219 tx_cmd_b
= (mss
<< TX_CMD_B_MSS_SHIFT
) & TX_CMD_B_MSS
;
2221 tx_cmd_a
|= TX_CMD_A_LSO
;
2227 cpu_to_le32s(&tx_cmd_b
);
2228 memcpy(skb
->data
, &tx_cmd_b
, 4);
2231 cpu_to_le32s(&tx_cmd_a
);
2232 memcpy(skb
->data
, &tx_cmd_a
, 4);
2237 static int smsc75xx_manage_power(struct usbnet
*dev
, int on
)
2239 dev
->intf
->needs_remote_wakeup
= on
;
2243 static const struct driver_info smsc75xx_info
= {
2244 .description
= "smsc75xx USB 2.0 Gigabit Ethernet",
2245 .bind
= smsc75xx_bind
,
2246 .unbind
= smsc75xx_unbind
,
2247 .link_reset
= smsc75xx_link_reset
,
2248 .reset
= smsc75xx_reset
,
2249 .rx_fixup
= smsc75xx_rx_fixup
,
2250 .tx_fixup
= smsc75xx_tx_fixup
,
2251 .status
= smsc75xx_status
,
2252 .manage_power
= smsc75xx_manage_power
,
2253 .flags
= FLAG_ETHER
| FLAG_SEND_ZLP
| FLAG_LINK_INTR
,
2256 static const struct usb_device_id products
[] = {
2258 /* SMSC7500 USB Gigabit Ethernet Device */
2259 USB_DEVICE(USB_VENDOR_ID_SMSC
, USB_PRODUCT_ID_LAN7500
),
2260 .driver_info
= (unsigned long) &smsc75xx_info
,
2263 /* SMSC7500 USB Gigabit Ethernet Device */
2264 USB_DEVICE(USB_VENDOR_ID_SMSC
, USB_PRODUCT_ID_LAN7505
),
2265 .driver_info
= (unsigned long) &smsc75xx_info
,
2269 MODULE_DEVICE_TABLE(usb
, products
);
2271 static struct usb_driver smsc75xx_driver
= {
2272 .name
= SMSC_CHIPNAME
,
2273 .id_table
= products
,
2274 .probe
= usbnet_probe
,
2275 .suspend
= smsc75xx_suspend
,
2276 .resume
= smsc75xx_resume
,
2277 .reset_resume
= smsc75xx_resume
,
2278 .disconnect
= usbnet_disconnect
,
2279 .disable_hub_initiated_lpm
= 1,
2280 .supports_autosuspend
= 1,
2283 module_usb_driver(smsc75xx_driver
);
2285 MODULE_AUTHOR("Nancy Lin");
2286 MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>");
2287 MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices");
2288 MODULE_LICENSE("GPL");