1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
22 Intel Linux Wireless <ilw@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
32 Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then refers to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <asm/uaccess.h>
153 #include <linux/fs.h>
154 #include <linux/mm.h>
155 #include <linux/slab.h>
156 #include <linux/unistd.h>
157 #include <linux/stringify.h>
158 #include <linux/tcp.h>
159 #include <linux/types.h>
160 #include <linux/time.h>
161 #include <linux/firmware.h>
162 #include <linux/acpi.h>
163 #include <linux/ctype.h>
164 #include <linux/pm_qos.h>
166 #include <net/lib80211.h>
171 #define IPW2100_VERSION "git-1.2.2"
173 #define DRV_NAME "ipw2100"
174 #define DRV_VERSION IPW2100_VERSION
175 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
176 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
178 static struct pm_qos_request ipw2100_pm_qos_req
;
180 /* Debugging stuff */
181 #ifdef CONFIG_IPW2100_DEBUG
182 #define IPW2100_RX_DEBUG /* Reception debugging */
185 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
186 MODULE_VERSION(DRV_VERSION
);
187 MODULE_AUTHOR(DRV_COPYRIGHT
);
188 MODULE_LICENSE("GPL");
190 static int debug
= 0;
191 static int network_mode
= 0;
192 static int channel
= 0;
193 static int associate
= 0;
194 static int disable
= 0;
196 static struct ipw2100_fw ipw2100_firmware
;
199 #include <linux/moduleparam.h>
200 module_param(debug
, int, 0444);
201 module_param_named(mode
, network_mode
, int, 0444);
202 module_param(channel
, int, 0444);
203 module_param(associate
, int, 0444);
204 module_param(disable
, int, 0444);
206 MODULE_PARM_DESC(debug
, "debug level");
207 MODULE_PARM_DESC(mode
, "network mode (0=BSS,1=IBSS,2=Monitor)");
208 MODULE_PARM_DESC(channel
, "channel");
209 MODULE_PARM_DESC(associate
, "auto associate when scanning (default off)");
210 MODULE_PARM_DESC(disable
, "manually disable the radio (default 0 [radio on])");
212 static u32 ipw2100_debug_level
= IPW_DL_NONE
;
214 #ifdef CONFIG_IPW2100_DEBUG
215 #define IPW_DEBUG(level, message...) \
217 if (ipw2100_debug_level & (level)) { \
218 printk(KERN_DEBUG "ipw2100: %c %s ", \
219 in_interrupt() ? 'I' : 'U', __func__); \
224 #define IPW_DEBUG(level, message...) do {} while (0)
225 #endif /* CONFIG_IPW2100_DEBUG */
227 #ifdef CONFIG_IPW2100_DEBUG
228 static const char *command_types
[] = {
230 "unused", /* HOST_ATTENTION */
232 "unused", /* SLEEP */
233 "unused", /* HOST_POWER_DOWN */
236 "unused", /* SET_IMR */
239 "AUTHENTICATION_TYPE",
242 "INTERNATIONAL_MODE",
257 "CLEAR_ALL_MULTICAST",
278 "AP_OR_STATION_TABLE",
282 "unused", /* SAVE_CALIBRATION */
283 "unused", /* RESTORE_CALIBRATION */
287 "HOST_PRE_POWER_DOWN",
288 "unused", /* HOST_INTERRUPT_COALESCING */
290 "CARD_DISABLE_PHY_OFF",
293 "SET_STATION_STAT_BITS",
294 "CLEAR_STATIONS_STAT_BITS",
296 "SET_SECURITY_INFORMATION",
297 "DISASSOCIATION_BSSID",
302 static const long ipw2100_frequencies
[] = {
303 2412, 2417, 2422, 2427,
304 2432, 2437, 2442, 2447,
305 2452, 2457, 2462, 2467,
309 #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
311 static struct ieee80211_rate ipw2100_bg_rates
[] = {
313 { .bitrate
= 20, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
314 { .bitrate
= 55, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
315 { .bitrate
= 110, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
318 #define RATE_COUNT ARRAY_SIZE(ipw2100_bg_rates)
320 /* Pre-decl until we get the code solid and then we can clean it up */
321 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
);
322 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
);
323 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
);
325 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
);
326 static void ipw2100_queues_free(struct ipw2100_priv
*priv
);
327 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
);
329 static int ipw2100_fw_download(struct ipw2100_priv
*priv
,
330 struct ipw2100_fw
*fw
);
331 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
332 struct ipw2100_fw
*fw
);
333 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
335 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
337 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
338 struct ipw2100_fw
*fw
);
339 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
340 struct ipw2100_fw
*fw
);
341 static void ipw2100_wx_event_work(struct work_struct
*work
);
342 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
);
343 static struct iw_handler_def ipw2100_wx_handler_def
;
345 static inline void read_register(struct net_device
*dev
, u32 reg
, u32
* val
)
347 struct ipw2100_priv
*priv
= libipw_priv(dev
);
349 *val
= ioread32(priv
->ioaddr
+ reg
);
350 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg
, *val
);
353 static inline void write_register(struct net_device
*dev
, u32 reg
, u32 val
)
355 struct ipw2100_priv
*priv
= libipw_priv(dev
);
357 iowrite32(val
, priv
->ioaddr
+ reg
);
358 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg
, val
);
361 static inline void read_register_word(struct net_device
*dev
, u32 reg
,
364 struct ipw2100_priv
*priv
= libipw_priv(dev
);
366 *val
= ioread16(priv
->ioaddr
+ reg
);
367 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg
, *val
);
370 static inline void read_register_byte(struct net_device
*dev
, u32 reg
, u8
* val
)
372 struct ipw2100_priv
*priv
= libipw_priv(dev
);
374 *val
= ioread8(priv
->ioaddr
+ reg
);
375 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg
, *val
);
378 static inline void write_register_word(struct net_device
*dev
, u32 reg
, u16 val
)
380 struct ipw2100_priv
*priv
= libipw_priv(dev
);
382 iowrite16(val
, priv
->ioaddr
+ reg
);
383 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg
, val
);
386 static inline void write_register_byte(struct net_device
*dev
, u32 reg
, u8 val
)
388 struct ipw2100_priv
*priv
= libipw_priv(dev
);
390 iowrite8(val
, priv
->ioaddr
+ reg
);
391 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg
, val
);
394 static inline void read_nic_dword(struct net_device
*dev
, u32 addr
, u32
* val
)
396 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
397 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
398 read_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
401 static inline void write_nic_dword(struct net_device
*dev
, u32 addr
, u32 val
)
403 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
404 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
405 write_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
408 static inline void read_nic_word(struct net_device
*dev
, u32 addr
, u16
* val
)
410 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
411 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
412 read_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
415 static inline void write_nic_word(struct net_device
*dev
, u32 addr
, u16 val
)
417 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
418 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
419 write_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
422 static inline void read_nic_byte(struct net_device
*dev
, u32 addr
, u8
* val
)
424 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
425 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
426 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
429 static inline void write_nic_byte(struct net_device
*dev
, u32 addr
, u8 val
)
431 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
432 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
433 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
436 static inline void write_nic_auto_inc_address(struct net_device
*dev
, u32 addr
)
438 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
,
439 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
442 static inline void write_nic_dword_auto_inc(struct net_device
*dev
, u32 val
)
444 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, val
);
447 static void write_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
455 /* read first nibble byte by byte */
456 aligned_addr
= addr
& (~0x3);
457 dif_len
= addr
- aligned_addr
;
459 /* Start reading at aligned_addr + dif_len */
460 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
462 for (i
= dif_len
; i
< 4; i
++, buf
++)
463 write_register_byte(dev
,
464 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
471 /* read DWs through autoincrement registers */
472 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
473 aligned_len
= len
& (~0x3);
474 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
475 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, *(u32
*) buf
);
477 /* copy the last nibble */
478 dif_len
= len
- aligned_len
;
479 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
480 for (i
= 0; i
< dif_len
; i
++, buf
++)
481 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
485 static void read_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
493 /* read first nibble byte by byte */
494 aligned_addr
= addr
& (~0x3);
495 dif_len
= addr
- aligned_addr
;
497 /* Start reading at aligned_addr + dif_len */
498 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
500 for (i
= dif_len
; i
< 4; i
++, buf
++)
501 read_register_byte(dev
,
502 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
509 /* read DWs through autoincrement registers */
510 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
511 aligned_len
= len
& (~0x3);
512 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
513 read_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, (u32
*) buf
);
515 /* copy the last nibble */
516 dif_len
= len
- aligned_len
;
517 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
518 for (i
= 0; i
< dif_len
; i
++, buf
++)
519 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
, buf
);
522 static bool ipw2100_hw_is_adapter_in_system(struct net_device
*dev
)
526 read_register(dev
, IPW_REG_DOA_DEBUG_AREA_START
, &dbg
);
528 return dbg
== IPW_DATA_DOA_DEBUG_VALUE
;
531 static int ipw2100_get_ordinal(struct ipw2100_priv
*priv
, u32 ord
,
532 void *val
, u32
* len
)
534 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
541 if (ordinals
->table1_addr
== 0) {
542 printk(KERN_WARNING DRV_NAME
": attempt to use fw ordinals "
543 "before they have been loaded.\n");
547 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
548 if (*len
< IPW_ORD_TAB_1_ENTRY_SIZE
) {
549 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
551 printk(KERN_WARNING DRV_NAME
552 ": ordinal buffer length too small, need %zd\n",
553 IPW_ORD_TAB_1_ENTRY_SIZE
);
558 read_nic_dword(priv
->net_dev
,
559 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
560 read_nic_dword(priv
->net_dev
, addr
, val
);
562 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
567 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
)) {
569 ord
-= IPW_START_ORD_TAB_2
;
571 /* get the address of statistic */
572 read_nic_dword(priv
->net_dev
,
573 ordinals
->table2_addr
+ (ord
<< 3), &addr
);
575 /* get the second DW of statistics ;
576 * two 16-bit words - first is length, second is count */
577 read_nic_dword(priv
->net_dev
,
578 ordinals
->table2_addr
+ (ord
<< 3) + sizeof(u32
),
581 /* get each entry length */
582 field_len
= *((u16
*) & field_info
);
584 /* get number of entries */
585 field_count
= *(((u16
*) & field_info
) + 1);
587 /* abort if no enough memory */
588 total_length
= field_len
* field_count
;
589 if (total_length
> *len
) {
598 /* read the ordinal data from the SRAM */
599 read_nic_memory(priv
->net_dev
, addr
, total_length
, val
);
604 printk(KERN_WARNING DRV_NAME
": ordinal %d neither in table 1 nor "
605 "in table 2\n", ord
);
610 static int ipw2100_set_ordinal(struct ipw2100_priv
*priv
, u32 ord
, u32
* val
,
613 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
616 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
617 if (*len
!= IPW_ORD_TAB_1_ENTRY_SIZE
) {
618 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
619 IPW_DEBUG_INFO("wrong size\n");
623 read_nic_dword(priv
->net_dev
,
624 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
626 write_nic_dword(priv
->net_dev
, addr
, *val
);
628 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
633 IPW_DEBUG_INFO("wrong table\n");
634 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
))
640 static char *snprint_line(char *buf
, size_t count
,
641 const u8
* data
, u32 len
, u32 ofs
)
646 out
= snprintf(buf
, count
, "%08X", ofs
);
648 for (l
= 0, i
= 0; i
< 2; i
++) {
649 out
+= snprintf(buf
+ out
, count
- out
, " ");
650 for (j
= 0; j
< 8 && l
< len
; j
++, l
++)
651 out
+= snprintf(buf
+ out
, count
- out
, "%02X ",
654 out
+= snprintf(buf
+ out
, count
- out
, " ");
657 out
+= snprintf(buf
+ out
, count
- out
, " ");
658 for (l
= 0, i
= 0; i
< 2; i
++) {
659 out
+= snprintf(buf
+ out
, count
- out
, " ");
660 for (j
= 0; j
< 8 && l
< len
; j
++, l
++) {
661 c
= data
[(i
* 8 + j
)];
662 if (!isascii(c
) || !isprint(c
))
665 out
+= snprintf(buf
+ out
, count
- out
, "%c", c
);
669 out
+= snprintf(buf
+ out
, count
- out
, " ");
675 static void printk_buf(int level
, const u8
* data
, u32 len
)
679 if (!(ipw2100_debug_level
& level
))
683 printk(KERN_DEBUG
"%s\n",
684 snprint_line(line
, sizeof(line
), &data
[ofs
],
685 min(len
, 16U), ofs
));
687 len
-= min(len
, 16U);
691 #define MAX_RESET_BACKOFF 10
693 static void schedule_reset(struct ipw2100_priv
*priv
)
695 unsigned long now
= get_seconds();
697 /* If we haven't received a reset request within the backoff period,
698 * then we can reset the backoff interval so this reset occurs
700 if (priv
->reset_backoff
&&
701 (now
- priv
->last_reset
> priv
->reset_backoff
))
702 priv
->reset_backoff
= 0;
704 priv
->last_reset
= get_seconds();
706 if (!(priv
->status
& STATUS_RESET_PENDING
)) {
707 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
708 priv
->net_dev
->name
, priv
->reset_backoff
);
709 netif_carrier_off(priv
->net_dev
);
710 netif_stop_queue(priv
->net_dev
);
711 priv
->status
|= STATUS_RESET_PENDING
;
712 if (priv
->reset_backoff
)
713 schedule_delayed_work(&priv
->reset_work
,
714 priv
->reset_backoff
* HZ
);
716 schedule_delayed_work(&priv
->reset_work
, 0);
718 if (priv
->reset_backoff
< MAX_RESET_BACKOFF
)
719 priv
->reset_backoff
++;
721 wake_up_interruptible(&priv
->wait_command_queue
);
723 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
724 priv
->net_dev
->name
);
728 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
729 static int ipw2100_hw_send_command(struct ipw2100_priv
*priv
,
730 struct host_command
*cmd
)
732 struct list_head
*element
;
733 struct ipw2100_tx_packet
*packet
;
737 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
738 command_types
[cmd
->host_command
], cmd
->host_command
,
739 cmd
->host_command_length
);
740 printk_buf(IPW_DL_HC
, (u8
*) cmd
->host_command_parameters
,
741 cmd
->host_command_length
);
743 spin_lock_irqsave(&priv
->low_lock
, flags
);
745 if (priv
->fatal_error
) {
747 ("Attempt to send command while hardware in fatal error condition.\n");
752 if (!(priv
->status
& STATUS_RUNNING
)) {
754 ("Attempt to send command while hardware is not running.\n");
759 if (priv
->status
& STATUS_CMD_ACTIVE
) {
761 ("Attempt to send command while another command is pending.\n");
766 if (list_empty(&priv
->msg_free_list
)) {
767 IPW_DEBUG_INFO("no available msg buffers\n");
771 priv
->status
|= STATUS_CMD_ACTIVE
;
772 priv
->messages_sent
++;
774 element
= priv
->msg_free_list
.next
;
776 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
777 packet
->jiffy_start
= jiffies
;
779 /* initialize the firmware command packet */
780 packet
->info
.c_struct
.cmd
->host_command_reg
= cmd
->host_command
;
781 packet
->info
.c_struct
.cmd
->host_command_reg1
= cmd
->host_command1
;
782 packet
->info
.c_struct
.cmd
->host_command_len_reg
=
783 cmd
->host_command_length
;
784 packet
->info
.c_struct
.cmd
->sequence
= cmd
->host_command_sequence
;
786 memcpy(packet
->info
.c_struct
.cmd
->host_command_params_reg
,
787 cmd
->host_command_parameters
,
788 sizeof(packet
->info
.c_struct
.cmd
->host_command_params_reg
));
791 DEC_STAT(&priv
->msg_free_stat
);
793 list_add_tail(element
, &priv
->msg_pend_list
);
794 INC_STAT(&priv
->msg_pend_stat
);
796 ipw2100_tx_send_commands(priv
);
797 ipw2100_tx_send_data(priv
);
799 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
802 * We must wait for this command to complete before another
803 * command can be sent... but if we wait more than 3 seconds
804 * then there is a problem.
808 wait_event_interruptible_timeout(priv
->wait_command_queue
,
810 status
& STATUS_CMD_ACTIVE
),
811 HOST_COMPLETE_TIMEOUT
);
814 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
815 1000 * (HOST_COMPLETE_TIMEOUT
/ HZ
));
816 priv
->fatal_error
= IPW2100_ERR_MSG_TIMEOUT
;
817 priv
->status
&= ~STATUS_CMD_ACTIVE
;
818 schedule_reset(priv
);
822 if (priv
->fatal_error
) {
823 printk(KERN_WARNING DRV_NAME
": %s: firmware fatal error\n",
824 priv
->net_dev
->name
);
828 /* !!!!! HACK TEST !!!!!
829 * When lots of debug trace statements are enabled, the driver
830 * doesn't seem to have as many firmware restart cycles...
832 * As a test, we're sticking in a 1/100s delay here */
833 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
838 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
844 * Verify the values and data access of the hardware
845 * No locks needed or used. No functions called.
847 static int ipw2100_verify(struct ipw2100_priv
*priv
)
852 u32 val1
= 0x76543210;
853 u32 val2
= 0xFEDCBA98;
855 /* Domain 0 check - all values should be DOA_DEBUG */
856 for (address
= IPW_REG_DOA_DEBUG_AREA_START
;
857 address
< IPW_REG_DOA_DEBUG_AREA_END
; address
+= sizeof(u32
)) {
858 read_register(priv
->net_dev
, address
, &data1
);
859 if (data1
!= IPW_DATA_DOA_DEBUG_VALUE
)
863 /* Domain 1 check - use arbitrary read/write compare */
864 for (address
= 0; address
< 5; address
++) {
865 /* The memory area is not used now */
866 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
868 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
870 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
872 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
874 if (val1
== data1
&& val2
== data2
)
883 * Loop until the CARD_DISABLED bit is the same value as the
886 * TODO: See if it would be more efficient to do a wait/wake
887 * cycle and have the completion event trigger the wakeup
890 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
891 static int ipw2100_wait_for_card_state(struct ipw2100_priv
*priv
, int state
)
895 u32 len
= sizeof(card_state
);
898 for (i
= 0; i
<= IPW_CARD_DISABLE_COMPLETE_WAIT
* 1000; i
+= 50) {
899 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CARD_DISABLED
,
902 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
907 /* We'll break out if either the HW state says it is
908 * in the state we want, or if HOST_COMPLETE command
910 if ((card_state
== state
) ||
911 ((priv
->status
& STATUS_ENABLED
) ?
912 IPW_HW_STATE_ENABLED
: IPW_HW_STATE_DISABLED
) == state
) {
913 if (state
== IPW_HW_STATE_ENABLED
)
914 priv
->status
|= STATUS_ENABLED
;
916 priv
->status
&= ~STATUS_ENABLED
;
924 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
925 state
? "DISABLED" : "ENABLED");
929 /*********************************************************************
930 Procedure : sw_reset_and_clock
931 Purpose : Asserts s/w reset, asserts clock initialization
932 and waits for clock stabilization
933 ********************************************************************/
934 static int sw_reset_and_clock(struct ipw2100_priv
*priv
)
940 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
941 IPW_AUX_HOST_RESET_REG_SW_RESET
);
943 // wait for clock stabilization
944 for (i
= 0; i
< 1000; i
++) {
945 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY
);
947 // check clock ready bit
948 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, &r
);
949 if (r
& IPW_AUX_HOST_RESET_REG_PRINCETON_RESET
)
954 return -EIO
; // TODO: better error value
956 /* set "initialization complete" bit to move adapter to
958 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
959 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE
);
961 /* wait for clock stabilization */
962 for (i
= 0; i
< 10000; i
++) {
963 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY
* 4);
965 /* check clock ready bit */
966 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
967 if (r
& IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY
)
972 return -EIO
; /* TODO: better error value */
974 /* set D0 standby bit */
975 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
976 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
977 r
| IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY
);
982 /*********************************************************************
983 Procedure : ipw2100_download_firmware
984 Purpose : Initiaze adapter after power on.
986 1. assert s/w reset first!
987 2. awake clocks & wait for clock stabilization
988 3. hold ARC (don't ask me why...)
989 4. load Dino ucode and reset/clock init again
990 5. zero-out shared mem
992 *******************************************************************/
993 static int ipw2100_download_firmware(struct ipw2100_priv
*priv
)
999 /* Fetch the firmware and microcode */
1000 struct ipw2100_fw ipw2100_firmware
;
1003 if (priv
->fatal_error
) {
1004 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
1005 "fatal error %d. Interface must be brought down.\n",
1006 priv
->net_dev
->name
, priv
->fatal_error
);
1010 if (!ipw2100_firmware
.version
) {
1011 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1013 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1014 priv
->net_dev
->name
, err
);
1015 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1020 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1022 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1023 priv
->net_dev
->name
, err
);
1024 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1028 priv
->firmware_version
= ipw2100_firmware
.version
;
1030 /* s/w reset and clock stabilization */
1031 err
= sw_reset_and_clock(priv
);
1033 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1034 priv
->net_dev
->name
, err
);
1038 err
= ipw2100_verify(priv
);
1040 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1041 priv
->net_dev
->name
, err
);
1046 write_nic_dword(priv
->net_dev
,
1047 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x80000000);
1049 /* allow ARC to run */
1050 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1052 /* load microcode */
1053 err
= ipw2100_ucode_download(priv
, &ipw2100_firmware
);
1055 printk(KERN_ERR DRV_NAME
": %s: Error loading microcode: %d\n",
1056 priv
->net_dev
->name
, err
);
1061 write_nic_dword(priv
->net_dev
,
1062 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x00000000);
1064 /* s/w reset and clock stabilization (again!!!) */
1065 err
= sw_reset_and_clock(priv
);
1067 printk(KERN_ERR DRV_NAME
1068 ": %s: sw_reset_and_clock failed: %d\n",
1069 priv
->net_dev
->name
, err
);
1074 err
= ipw2100_fw_download(priv
, &ipw2100_firmware
);
1076 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1077 priv
->net_dev
->name
, err
);
1082 * When the .resume method of the driver is called, the other
1083 * part of the system, i.e. the ide driver could still stay in
1084 * the suspend stage. This prevents us from loading the firmware
1085 * from the disk. --YZ
1088 /* free any storage allocated for firmware image */
1089 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1092 /* zero out Domain 1 area indirectly (Si requirement) */
1093 for (address
= IPW_HOST_FW_SHARED_AREA0
;
1094 address
< IPW_HOST_FW_SHARED_AREA0_END
; address
+= 4)
1095 write_nic_dword(priv
->net_dev
, address
, 0);
1096 for (address
= IPW_HOST_FW_SHARED_AREA1
;
1097 address
< IPW_HOST_FW_SHARED_AREA1_END
; address
+= 4)
1098 write_nic_dword(priv
->net_dev
, address
, 0);
1099 for (address
= IPW_HOST_FW_SHARED_AREA2
;
1100 address
< IPW_HOST_FW_SHARED_AREA2_END
; address
+= 4)
1101 write_nic_dword(priv
->net_dev
, address
, 0);
1102 for (address
= IPW_HOST_FW_SHARED_AREA3
;
1103 address
< IPW_HOST_FW_SHARED_AREA3_END
; address
+= 4)
1104 write_nic_dword(priv
->net_dev
, address
, 0);
1105 for (address
= IPW_HOST_FW_INTERRUPT_AREA
;
1106 address
< IPW_HOST_FW_INTERRUPT_AREA_END
; address
+= 4)
1107 write_nic_dword(priv
->net_dev
, address
, 0);
1112 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1116 static inline void ipw2100_enable_interrupts(struct ipw2100_priv
*priv
)
1118 if (priv
->status
& STATUS_INT_ENABLED
)
1120 priv
->status
|= STATUS_INT_ENABLED
;
1121 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, IPW_INTERRUPT_MASK
);
1124 static inline void ipw2100_disable_interrupts(struct ipw2100_priv
*priv
)
1126 if (!(priv
->status
& STATUS_INT_ENABLED
))
1128 priv
->status
&= ~STATUS_INT_ENABLED
;
1129 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, 0x0);
1132 static void ipw2100_initialize_ordinals(struct ipw2100_priv
*priv
)
1134 struct ipw2100_ordinals
*ord
= &priv
->ordinals
;
1136 IPW_DEBUG_INFO("enter\n");
1138 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1
,
1141 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2
,
1144 read_nic_dword(priv
->net_dev
, ord
->table1_addr
, &ord
->table1_size
);
1145 read_nic_dword(priv
->net_dev
, ord
->table2_addr
, &ord
->table2_size
);
1147 ord
->table2_size
&= 0x0000FFFF;
1149 IPW_DEBUG_INFO("table 1 size: %d\n", ord
->table1_size
);
1150 IPW_DEBUG_INFO("table 2 size: %d\n", ord
->table2_size
);
1151 IPW_DEBUG_INFO("exit\n");
1154 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv
*priv
)
1158 * Set GPIO 3 writable by FW; GPIO 1 writable
1159 * by driver and enable clock
1161 reg
= (IPW_BIT_GPIO_GPIO3_MASK
| IPW_BIT_GPIO_GPIO1_ENABLE
|
1162 IPW_BIT_GPIO_LED_OFF
);
1163 write_register(priv
->net_dev
, IPW_REG_GPIO
, reg
);
1166 static int rf_kill_active(struct ipw2100_priv
*priv
)
1168 #define MAX_RF_KILL_CHECKS 5
1169 #define RF_KILL_CHECK_DELAY 40
1171 unsigned short value
= 0;
1175 if (!(priv
->hw_features
& HW_FEATURE_RFKILL
)) {
1176 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1177 priv
->status
&= ~STATUS_RF_KILL_HW
;
1181 for (i
= 0; i
< MAX_RF_KILL_CHECKS
; i
++) {
1182 udelay(RF_KILL_CHECK_DELAY
);
1183 read_register(priv
->net_dev
, IPW_REG_GPIO
, ®
);
1184 value
= (value
<< 1) | ((reg
& IPW_BIT_GPIO_RF_KILL
) ? 0 : 1);
1188 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
1189 priv
->status
|= STATUS_RF_KILL_HW
;
1191 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1192 priv
->status
&= ~STATUS_RF_KILL_HW
;
1195 return (value
== 0);
1198 static int ipw2100_get_hw_features(struct ipw2100_priv
*priv
)
1204 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1207 if (ipw2100_get_ordinal
1208 (priv
, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS
, &addr
, &len
)) {
1209 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1214 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr
);
1217 * EEPROM version is the byte at offset 0xfd in firmware
1218 * We read 4 bytes, then shift out the byte we actually want */
1219 read_nic_dword(priv
->net_dev
, addr
+ 0xFC, &val
);
1220 priv
->eeprom_version
= (val
>> 24) & 0xFF;
1221 IPW_DEBUG_INFO("EEPROM version: %d\n", priv
->eeprom_version
);
1224 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1226 * notice that the EEPROM bit is reverse polarity, i.e.
1227 * bit = 0 signifies HW RF kill switch is supported
1228 * bit = 1 signifies HW RF kill switch is NOT supported
1230 read_nic_dword(priv
->net_dev
, addr
+ 0x20, &val
);
1231 if (!((val
>> 24) & 0x01))
1232 priv
->hw_features
|= HW_FEATURE_RFKILL
;
1234 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1235 (priv
->hw_features
& HW_FEATURE_RFKILL
) ? "" : "not ");
1241 * Start firmware execution after power on and intialization
1244 * 2. Wait for f/w initialization completes;
1246 static int ipw2100_start_adapter(struct ipw2100_priv
*priv
)
1249 u32 inta
, inta_mask
, gpio
;
1251 IPW_DEBUG_INFO("enter\n");
1253 if (priv
->status
& STATUS_RUNNING
)
1257 * Initialize the hw - drive adapter to DO state by setting
1258 * init_done bit. Wait for clk_ready bit and Download
1261 if (ipw2100_download_firmware(priv
)) {
1262 printk(KERN_ERR DRV_NAME
1263 ": %s: Failed to power on the adapter.\n",
1264 priv
->net_dev
->name
);
1268 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1269 * in the firmware RBD and TBD ring queue */
1270 ipw2100_queues_initialize(priv
);
1272 ipw2100_hw_set_gpio(priv
);
1274 /* TODO -- Look at disabling interrupts here to make sure none
1275 * get fired during FW initialization */
1277 /* Release ARC - clear reset bit */
1278 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1280 /* wait for f/w intialization complete */
1281 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1284 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1285 /* Todo... wait for sync command ... */
1287 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1289 /* check "init done" bit */
1290 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
1291 /* reset "init done" bit */
1292 write_register(priv
->net_dev
, IPW_REG_INTA
,
1293 IPW2100_INTA_FW_INIT_DONE
);
1297 /* check error conditions : we check these after the firmware
1298 * check so that if there is an error, the interrupt handler
1299 * will see it and the adapter will be reset */
1301 (IPW2100_INTA_FATAL_ERROR
| IPW2100_INTA_PARITY_ERROR
)) {
1302 /* clear error conditions */
1303 write_register(priv
->net_dev
, IPW_REG_INTA
,
1304 IPW2100_INTA_FATAL_ERROR
|
1305 IPW2100_INTA_PARITY_ERROR
);
1309 /* Clear out any pending INTAs since we aren't supposed to have
1310 * interrupts enabled at this point... */
1311 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1312 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
1313 inta
&= IPW_INTERRUPT_MASK
;
1314 /* Clear out any pending interrupts */
1315 if (inta
& inta_mask
)
1316 write_register(priv
->net_dev
, IPW_REG_INTA
, inta
);
1318 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1319 i
? "SUCCESS" : "FAILED");
1322 printk(KERN_WARNING DRV_NAME
1323 ": %s: Firmware did not initialize.\n",
1324 priv
->net_dev
->name
);
1328 /* allow firmware to write to GPIO1 & GPIO3 */
1329 read_register(priv
->net_dev
, IPW_REG_GPIO
, &gpio
);
1331 gpio
|= (IPW_BIT_GPIO_GPIO1_MASK
| IPW_BIT_GPIO_GPIO3_MASK
);
1333 write_register(priv
->net_dev
, IPW_REG_GPIO
, gpio
);
1335 /* Ready to receive commands */
1336 priv
->status
|= STATUS_RUNNING
;
1338 /* The adapter has been reset; we are not associated */
1339 priv
->status
&= ~(STATUS_ASSOCIATING
| STATUS_ASSOCIATED
);
1341 IPW_DEBUG_INFO("exit\n");
1346 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv
*priv
)
1348 if (!priv
->fatal_error
)
1351 priv
->fatal_errors
[priv
->fatal_index
++] = priv
->fatal_error
;
1352 priv
->fatal_index
%= IPW2100_ERROR_QUEUE
;
1353 priv
->fatal_error
= 0;
1356 /* NOTE: Our interrupt is disabled when this method is called */
1357 static int ipw2100_power_cycle_adapter(struct ipw2100_priv
*priv
)
1362 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1364 ipw2100_hw_set_gpio(priv
);
1366 /* Step 1. Stop Master Assert */
1367 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1368 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1370 /* Step 2. Wait for stop Master Assert
1371 * (not more than 50us, otherwise ret error */
1374 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
1375 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1377 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1381 priv
->status
&= ~STATUS_RESET_PENDING
;
1385 ("exit - waited too long for master assert stop\n");
1389 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1390 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1392 /* Reset any fatal_error conditions */
1393 ipw2100_reset_fatalerror(priv
);
1395 /* At this point, the adapter is now stopped and disabled */
1396 priv
->status
&= ~(STATUS_RUNNING
| STATUS_ASSOCIATING
|
1397 STATUS_ASSOCIATED
| STATUS_ENABLED
);
1403 * Send the CARD_DISABLE_PHY_OFF command to the card to disable it
1405 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1407 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1408 * if STATUS_ASSN_LOST is sent.
1410 static int ipw2100_hw_phy_off(struct ipw2100_priv
*priv
)
1413 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1415 struct host_command cmd
= {
1416 .host_command
= CARD_DISABLE_PHY_OFF
,
1417 .host_command_sequence
= 0,
1418 .host_command_length
= 0,
1423 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1425 /* Turn off the radio */
1426 err
= ipw2100_hw_send_command(priv
, &cmd
);
1430 for (i
= 0; i
< 2500; i
++) {
1431 read_nic_dword(priv
->net_dev
, IPW2100_CONTROL_REG
, &val1
);
1432 read_nic_dword(priv
->net_dev
, IPW2100_COMMAND
, &val2
);
1434 if ((val1
& IPW2100_CONTROL_PHY_OFF
) &&
1435 (val2
& IPW2100_COMMAND_PHY_OFF
))
1438 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY
);
1444 static int ipw2100_enable_adapter(struct ipw2100_priv
*priv
)
1446 struct host_command cmd
= {
1447 .host_command
= HOST_COMPLETE
,
1448 .host_command_sequence
= 0,
1449 .host_command_length
= 0
1453 IPW_DEBUG_HC("HOST_COMPLETE\n");
1455 if (priv
->status
& STATUS_ENABLED
)
1458 mutex_lock(&priv
->adapter_mutex
);
1460 if (rf_kill_active(priv
)) {
1461 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1465 err
= ipw2100_hw_send_command(priv
, &cmd
);
1467 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1471 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_ENABLED
);
1473 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1474 priv
->net_dev
->name
);
1478 if (priv
->stop_hang_check
) {
1479 priv
->stop_hang_check
= 0;
1480 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
1484 mutex_unlock(&priv
->adapter_mutex
);
1488 static int ipw2100_hw_stop_adapter(struct ipw2100_priv
*priv
)
1490 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1492 struct host_command cmd
= {
1493 .host_command
= HOST_PRE_POWER_DOWN
,
1494 .host_command_sequence
= 0,
1495 .host_command_length
= 0,
1500 if (!(priv
->status
& STATUS_RUNNING
))
1503 priv
->status
|= STATUS_STOPPING
;
1505 /* We can only shut down the card if the firmware is operational. So,
1506 * if we haven't reset since a fatal_error, then we can not send the
1507 * shutdown commands. */
1508 if (!priv
->fatal_error
) {
1509 /* First, make sure the adapter is enabled so that the PHY_OFF
1510 * command can shut it down */
1511 ipw2100_enable_adapter(priv
);
1513 err
= ipw2100_hw_phy_off(priv
);
1515 printk(KERN_WARNING DRV_NAME
1516 ": Error disabling radio %d\n", err
);
1519 * If in D0-standby mode going directly to D3 may cause a
1520 * PCI bus violation. Therefore we must change out of the D0
1523 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1524 * hardware from going into standby mode and will transition
1525 * out of D0-standby if it is already in that state.
1527 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1528 * driver upon completion. Once received, the driver can
1529 * proceed to the D3 state.
1531 * Prepare for power down command to fw. This command would
1532 * take HW out of D0-standby and prepare it for D3 state.
1534 * Currently FW does not support event notification for this
1535 * event. Therefore, skip waiting for it. Just wait a fixed
1538 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1540 err
= ipw2100_hw_send_command(priv
, &cmd
);
1542 printk(KERN_WARNING DRV_NAME
": "
1543 "%s: Power down command failed: Error %d\n",
1544 priv
->net_dev
->name
, err
);
1546 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY
);
1549 priv
->status
&= ~STATUS_ENABLED
;
1552 * Set GPIO 3 writable by FW; GPIO 1 writable
1553 * by driver and enable clock
1555 ipw2100_hw_set_gpio(priv
);
1558 * Power down adapter. Sequence:
1559 * 1. Stop master assert (RESET_REG[9]=1)
1560 * 2. Wait for stop master (RESET_REG[8]==1)
1561 * 3. S/w reset assert (RESET_REG[7] = 1)
1564 /* Stop master assert */
1565 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1566 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1568 /* wait stop master not more than 50 usec.
1569 * Otherwise return error. */
1570 for (i
= 5; i
> 0; i
--) {
1573 /* Check master stop bit */
1574 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1576 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1581 printk(KERN_WARNING DRV_NAME
1582 ": %s: Could now power down adapter.\n",
1583 priv
->net_dev
->name
);
1585 /* assert s/w reset */
1586 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1587 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1589 priv
->status
&= ~(STATUS_RUNNING
| STATUS_STOPPING
);
1594 static int ipw2100_disable_adapter(struct ipw2100_priv
*priv
)
1596 struct host_command cmd
= {
1597 .host_command
= CARD_DISABLE
,
1598 .host_command_sequence
= 0,
1599 .host_command_length
= 0
1603 IPW_DEBUG_HC("CARD_DISABLE\n");
1605 if (!(priv
->status
& STATUS_ENABLED
))
1608 /* Make sure we clear the associated state */
1609 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1611 if (!priv
->stop_hang_check
) {
1612 priv
->stop_hang_check
= 1;
1613 cancel_delayed_work(&priv
->hang_check
);
1616 mutex_lock(&priv
->adapter_mutex
);
1618 err
= ipw2100_hw_send_command(priv
, &cmd
);
1620 printk(KERN_WARNING DRV_NAME
1621 ": exit - failed to send CARD_DISABLE command\n");
1625 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_DISABLED
);
1627 printk(KERN_WARNING DRV_NAME
1628 ": exit - card failed to change to DISABLED\n");
1632 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1635 mutex_unlock(&priv
->adapter_mutex
);
1639 static int ipw2100_set_scan_options(struct ipw2100_priv
*priv
)
1641 struct host_command cmd
= {
1642 .host_command
= SET_SCAN_OPTIONS
,
1643 .host_command_sequence
= 0,
1644 .host_command_length
= 8
1648 IPW_DEBUG_INFO("enter\n");
1650 IPW_DEBUG_SCAN("setting scan options\n");
1652 cmd
.host_command_parameters
[0] = 0;
1654 if (!(priv
->config
& CFG_ASSOCIATE
))
1655 cmd
.host_command_parameters
[0] |= IPW_SCAN_NOASSOCIATE
;
1656 if ((priv
->ieee
->sec
.flags
& SEC_ENABLED
) && priv
->ieee
->sec
.enabled
)
1657 cmd
.host_command_parameters
[0] |= IPW_SCAN_MIXED_CELL
;
1658 if (priv
->config
& CFG_PASSIVE_SCAN
)
1659 cmd
.host_command_parameters
[0] |= IPW_SCAN_PASSIVE
;
1661 cmd
.host_command_parameters
[1] = priv
->channel_mask
;
1663 err
= ipw2100_hw_send_command(priv
, &cmd
);
1665 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1666 cmd
.host_command_parameters
[0]);
1671 static int ipw2100_start_scan(struct ipw2100_priv
*priv
)
1673 struct host_command cmd
= {
1674 .host_command
= BROADCAST_SCAN
,
1675 .host_command_sequence
= 0,
1676 .host_command_length
= 4
1680 IPW_DEBUG_HC("START_SCAN\n");
1682 cmd
.host_command_parameters
[0] = 0;
1684 /* No scanning if in monitor mode */
1685 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
1688 if (priv
->status
& STATUS_SCANNING
) {
1689 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1693 IPW_DEBUG_INFO("enter\n");
1695 /* Not clearing here; doing so makes iwlist always return nothing...
1697 * We should modify the table logic to use aging tables vs. clearing
1698 * the table on each scan start.
1700 IPW_DEBUG_SCAN("starting scan\n");
1702 priv
->status
|= STATUS_SCANNING
;
1703 err
= ipw2100_hw_send_command(priv
, &cmd
);
1705 priv
->status
&= ~STATUS_SCANNING
;
1707 IPW_DEBUG_INFO("exit\n");
1712 static const struct libipw_geo ipw_geos
[] = {
1716 .bg
= {{2412, 1}, {2417, 2}, {2422, 3},
1717 {2427, 4}, {2432, 5}, {2437, 6},
1718 {2442, 7}, {2447, 8}, {2452, 9},
1719 {2457, 10}, {2462, 11}, {2467, 12},
1720 {2472, 13}, {2484, 14}},
1724 static int ipw2100_up(struct ipw2100_priv
*priv
, int deferred
)
1726 unsigned long flags
;
1729 u32 ord_len
= sizeof(lock
);
1731 /* Age scan list entries found before suspend */
1732 if (priv
->suspend_time
) {
1733 libipw_networks_age(priv
->ieee
, priv
->suspend_time
);
1734 priv
->suspend_time
= 0;
1737 /* Quiet if manually disabled. */
1738 if (priv
->status
& STATUS_RF_KILL_SW
) {
1739 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1740 "switch\n", priv
->net_dev
->name
);
1744 /* the ipw2100 hardware really doesn't want power management delays
1745 * longer than 175usec
1747 pm_qos_update_request(&ipw2100_pm_qos_req
, 175);
1749 /* If the interrupt is enabled, turn it off... */
1750 spin_lock_irqsave(&priv
->low_lock
, flags
);
1751 ipw2100_disable_interrupts(priv
);
1753 /* Reset any fatal_error conditions */
1754 ipw2100_reset_fatalerror(priv
);
1755 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1757 if (priv
->status
& STATUS_POWERED
||
1758 (priv
->status
& STATUS_RESET_PENDING
)) {
1759 /* Power cycle the card ... */
1760 if (ipw2100_power_cycle_adapter(priv
)) {
1761 printk(KERN_WARNING DRV_NAME
1762 ": %s: Could not cycle adapter.\n",
1763 priv
->net_dev
->name
);
1768 priv
->status
|= STATUS_POWERED
;
1770 /* Load the firmware, start the clocks, etc. */
1771 if (ipw2100_start_adapter(priv
)) {
1772 printk(KERN_ERR DRV_NAME
1773 ": %s: Failed to start the firmware.\n",
1774 priv
->net_dev
->name
);
1779 ipw2100_initialize_ordinals(priv
);
1781 /* Determine capabilities of this particular HW configuration */
1782 if (ipw2100_get_hw_features(priv
)) {
1783 printk(KERN_ERR DRV_NAME
1784 ": %s: Failed to determine HW features.\n",
1785 priv
->net_dev
->name
);
1790 /* Initialize the geo */
1791 libipw_set_geo(priv
->ieee
, &ipw_geos
[0]);
1792 priv
->ieee
->freq_band
= LIBIPW_24GHZ_BAND
;
1795 if (ipw2100_set_ordinal(priv
, IPW_ORD_PERS_DB_LOCK
, &lock
, &ord_len
)) {
1796 printk(KERN_ERR DRV_NAME
1797 ": %s: Failed to clear ordinal lock.\n",
1798 priv
->net_dev
->name
);
1803 priv
->status
&= ~STATUS_SCANNING
;
1805 if (rf_kill_active(priv
)) {
1806 printk(KERN_INFO
"%s: Radio is disabled by RF switch.\n",
1807 priv
->net_dev
->name
);
1809 if (priv
->stop_rf_kill
) {
1810 priv
->stop_rf_kill
= 0;
1811 schedule_delayed_work(&priv
->rf_kill
,
1812 round_jiffies_relative(HZ
));
1818 /* Turn on the interrupt so that commands can be processed */
1819 ipw2100_enable_interrupts(priv
);
1821 /* Send all of the commands that must be sent prior to
1823 if (ipw2100_adapter_setup(priv
)) {
1824 printk(KERN_ERR DRV_NAME
": %s: Failed to start the card.\n",
1825 priv
->net_dev
->name
);
1831 /* Enable the adapter - sends HOST_COMPLETE */
1832 if (ipw2100_enable_adapter(priv
)) {
1833 printk(KERN_ERR DRV_NAME
": "
1834 "%s: failed in call to enable adapter.\n",
1835 priv
->net_dev
->name
);
1836 ipw2100_hw_stop_adapter(priv
);
1841 /* Start a scan . . . */
1842 ipw2100_set_scan_options(priv
);
1843 ipw2100_start_scan(priv
);
1850 static void ipw2100_down(struct ipw2100_priv
*priv
)
1852 unsigned long flags
;
1853 union iwreq_data wrqu
= {
1855 .sa_family
= ARPHRD_ETHER
}
1857 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1859 /* Kill the RF switch timer */
1860 if (!priv
->stop_rf_kill
) {
1861 priv
->stop_rf_kill
= 1;
1862 cancel_delayed_work(&priv
->rf_kill
);
1865 /* Kill the firmware hang check timer */
1866 if (!priv
->stop_hang_check
) {
1867 priv
->stop_hang_check
= 1;
1868 cancel_delayed_work(&priv
->hang_check
);
1871 /* Kill any pending resets */
1872 if (priv
->status
& STATUS_RESET_PENDING
)
1873 cancel_delayed_work(&priv
->reset_work
);
1875 /* Make sure the interrupt is on so that FW commands will be
1876 * processed correctly */
1877 spin_lock_irqsave(&priv
->low_lock
, flags
);
1878 ipw2100_enable_interrupts(priv
);
1879 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1881 if (ipw2100_hw_stop_adapter(priv
))
1882 printk(KERN_ERR DRV_NAME
": %s: Error stopping adapter.\n",
1883 priv
->net_dev
->name
);
1885 /* Do not disable the interrupt until _after_ we disable
1886 * the adaptor. Otherwise the CARD_DISABLE command will never
1887 * be ack'd by the firmware */
1888 spin_lock_irqsave(&priv
->low_lock
, flags
);
1889 ipw2100_disable_interrupts(priv
);
1890 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1892 pm_qos_update_request(&ipw2100_pm_qos_req
, PM_QOS_DEFAULT_VALUE
);
1894 /* We have to signal any supplicant if we are disassociating */
1896 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1898 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1899 netif_carrier_off(priv
->net_dev
);
1900 netif_stop_queue(priv
->net_dev
);
1903 static int ipw2100_wdev_init(struct net_device
*dev
)
1905 struct ipw2100_priv
*priv
= libipw_priv(dev
);
1906 const struct libipw_geo
*geo
= libipw_get_geo(priv
->ieee
);
1907 struct wireless_dev
*wdev
= &priv
->ieee
->wdev
;
1910 memcpy(wdev
->wiphy
->perm_addr
, priv
->mac_addr
, ETH_ALEN
);
1912 /* fill-out priv->ieee->bg_band */
1913 if (geo
->bg_channels
) {
1914 struct ieee80211_supported_band
*bg_band
= &priv
->ieee
->bg_band
;
1916 bg_band
->band
= IEEE80211_BAND_2GHZ
;
1917 bg_band
->n_channels
= geo
->bg_channels
;
1918 bg_band
->channels
= kcalloc(geo
->bg_channels
,
1919 sizeof(struct ieee80211_channel
),
1921 if (!bg_band
->channels
) {
1925 /* translate geo->bg to bg_band.channels */
1926 for (i
= 0; i
< geo
->bg_channels
; i
++) {
1927 bg_band
->channels
[i
].band
= IEEE80211_BAND_2GHZ
;
1928 bg_band
->channels
[i
].center_freq
= geo
->bg
[i
].freq
;
1929 bg_band
->channels
[i
].hw_value
= geo
->bg
[i
].channel
;
1930 bg_band
->channels
[i
].max_power
= geo
->bg
[i
].max_power
;
1931 if (geo
->bg
[i
].flags
& LIBIPW_CH_PASSIVE_ONLY
)
1932 bg_band
->channels
[i
].flags
|=
1933 IEEE80211_CHAN_PASSIVE_SCAN
;
1934 if (geo
->bg
[i
].flags
& LIBIPW_CH_NO_IBSS
)
1935 bg_band
->channels
[i
].flags
|=
1936 IEEE80211_CHAN_NO_IBSS
;
1937 if (geo
->bg
[i
].flags
& LIBIPW_CH_RADAR_DETECT
)
1938 bg_band
->channels
[i
].flags
|=
1939 IEEE80211_CHAN_RADAR
;
1940 /* No equivalent for LIBIPW_CH_80211H_RULES,
1941 LIBIPW_CH_UNIFORM_SPREADING, or
1942 LIBIPW_CH_B_ONLY... */
1944 /* point at bitrate info */
1945 bg_band
->bitrates
= ipw2100_bg_rates
;
1946 bg_band
->n_bitrates
= RATE_COUNT
;
1948 wdev
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] = bg_band
;
1951 wdev
->wiphy
->cipher_suites
= ipw_cipher_suites
;
1952 wdev
->wiphy
->n_cipher_suites
= ARRAY_SIZE(ipw_cipher_suites
);
1954 set_wiphy_dev(wdev
->wiphy
, &priv
->pci_dev
->dev
);
1955 if (wiphy_register(wdev
->wiphy
))
1960 static void ipw2100_reset_adapter(struct work_struct
*work
)
1962 struct ipw2100_priv
*priv
=
1963 container_of(work
, struct ipw2100_priv
, reset_work
.work
);
1964 unsigned long flags
;
1965 union iwreq_data wrqu
= {
1967 .sa_family
= ARPHRD_ETHER
}
1969 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1971 spin_lock_irqsave(&priv
->low_lock
, flags
);
1972 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv
->net_dev
->name
);
1974 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1975 priv
->status
|= STATUS_SECURITY_UPDATED
;
1977 /* Force a power cycle even if interface hasn't been opened
1979 cancel_delayed_work(&priv
->reset_work
);
1980 priv
->status
|= STATUS_RESET_PENDING
;
1981 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1983 mutex_lock(&priv
->action_mutex
);
1984 /* stop timed checks so that they don't interfere with reset */
1985 priv
->stop_hang_check
= 1;
1986 cancel_delayed_work(&priv
->hang_check
);
1988 /* We have to signal any supplicant if we are disassociating */
1990 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1992 ipw2100_up(priv
, 0);
1993 mutex_unlock(&priv
->action_mutex
);
1997 static void isr_indicate_associated(struct ipw2100_priv
*priv
, u32 status
)
2000 #define MAC_ASSOCIATION_READ_DELAY (HZ)
2002 unsigned int len
, essid_len
;
2003 char essid
[IW_ESSID_MAX_SIZE
];
2008 DECLARE_SSID_BUF(ssid
);
2011 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
2012 * an actual MAC of the AP. Seems like FW sets this
2013 * address too late. Read it later and expose through
2014 * /proc or schedule a later task to query and update
2017 essid_len
= IW_ESSID_MAX_SIZE
;
2018 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
,
2021 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2027 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &txrate
, &len
);
2029 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2035 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &len
);
2037 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2042 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
, bssid
,
2045 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2049 memcpy(priv
->ieee
->bssid
, bssid
, ETH_ALEN
);
2052 case TX_RATE_1_MBIT
:
2053 txratename
= "1Mbps";
2055 case TX_RATE_2_MBIT
:
2056 txratename
= "2Mbsp";
2058 case TX_RATE_5_5_MBIT
:
2059 txratename
= "5.5Mbps";
2061 case TX_RATE_11_MBIT
:
2062 txratename
= "11Mbps";
2065 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate
);
2066 txratename
= "unknown rate";
2070 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n",
2071 priv
->net_dev
->name
, print_ssid(ssid
, essid
, essid_len
),
2072 txratename
, chan
, bssid
);
2074 /* now we copy read ssid into dev */
2075 if (!(priv
->config
& CFG_STATIC_ESSID
)) {
2076 priv
->essid_len
= min((u8
) essid_len
, (u8
) IW_ESSID_MAX_SIZE
);
2077 memcpy(priv
->essid
, essid
, priv
->essid_len
);
2079 priv
->channel
= chan
;
2080 memcpy(priv
->bssid
, bssid
, ETH_ALEN
);
2082 priv
->status
|= STATUS_ASSOCIATING
;
2083 priv
->connect_start
= get_seconds();
2085 schedule_delayed_work(&priv
->wx_event_work
, HZ
/ 10);
2088 static int ipw2100_set_essid(struct ipw2100_priv
*priv
, char *essid
,
2089 int length
, int batch_mode
)
2091 int ssid_len
= min(length
, IW_ESSID_MAX_SIZE
);
2092 struct host_command cmd
= {
2093 .host_command
= SSID
,
2094 .host_command_sequence
= 0,
2095 .host_command_length
= ssid_len
2098 DECLARE_SSID_BUF(ssid
);
2100 IPW_DEBUG_HC("SSID: '%s'\n", print_ssid(ssid
, essid
, ssid_len
));
2103 memcpy(cmd
.host_command_parameters
, essid
, ssid_len
);
2106 err
= ipw2100_disable_adapter(priv
);
2111 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2112 * disable auto association -- so we cheat by setting a bogus SSID */
2113 if (!ssid_len
&& !(priv
->config
& CFG_ASSOCIATE
)) {
2115 u8
*bogus
= (u8
*) cmd
.host_command_parameters
;
2116 for (i
= 0; i
< IW_ESSID_MAX_SIZE
; i
++)
2117 bogus
[i
] = 0x18 + i
;
2118 cmd
.host_command_length
= IW_ESSID_MAX_SIZE
;
2121 /* NOTE: We always send the SSID command even if the provided ESSID is
2122 * the same as what we currently think is set. */
2124 err
= ipw2100_hw_send_command(priv
, &cmd
);
2126 memset(priv
->essid
+ ssid_len
, 0, IW_ESSID_MAX_SIZE
- ssid_len
);
2127 memcpy(priv
->essid
, essid
, ssid_len
);
2128 priv
->essid_len
= ssid_len
;
2132 if (ipw2100_enable_adapter(priv
))
2139 static void isr_indicate_association_lost(struct ipw2100_priv
*priv
, u32 status
)
2141 DECLARE_SSID_BUF(ssid
);
2143 IPW_DEBUG(IPW_DL_NOTIF
| IPW_DL_STATE
| IPW_DL_ASSOC
,
2144 "disassociated: '%s' %pM\n",
2145 print_ssid(ssid
, priv
->essid
, priv
->essid_len
),
2148 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
2150 if (priv
->status
& STATUS_STOPPING
) {
2151 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2155 memset(priv
->bssid
, 0, ETH_ALEN
);
2156 memset(priv
->ieee
->bssid
, 0, ETH_ALEN
);
2158 netif_carrier_off(priv
->net_dev
);
2159 netif_stop_queue(priv
->net_dev
);
2161 if (!(priv
->status
& STATUS_RUNNING
))
2164 if (priv
->status
& STATUS_SECURITY_UPDATED
)
2165 schedule_delayed_work(&priv
->security_work
, 0);
2167 schedule_delayed_work(&priv
->wx_event_work
, 0);
2170 static void isr_indicate_rf_kill(struct ipw2100_priv
*priv
, u32 status
)
2172 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2173 priv
->net_dev
->name
);
2175 /* RF_KILL is now enabled (else we wouldn't be here) */
2176 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
2177 priv
->status
|= STATUS_RF_KILL_HW
;
2179 /* Make sure the RF Kill check timer is running */
2180 priv
->stop_rf_kill
= 0;
2181 mod_delayed_work(system_wq
, &priv
->rf_kill
, round_jiffies_relative(HZ
));
2184 static void ipw2100_scan_event(struct work_struct
*work
)
2186 struct ipw2100_priv
*priv
= container_of(work
, struct ipw2100_priv
,
2188 union iwreq_data wrqu
;
2190 wrqu
.data
.length
= 0;
2191 wrqu
.data
.flags
= 0;
2192 wireless_send_event(priv
->net_dev
, SIOCGIWSCAN
, &wrqu
, NULL
);
2195 static void isr_scan_complete(struct ipw2100_priv
*priv
, u32 status
)
2197 IPW_DEBUG_SCAN("scan complete\n");
2198 /* Age the scan results... */
2199 priv
->ieee
->scans
++;
2200 priv
->status
&= ~STATUS_SCANNING
;
2202 /* Only userspace-requested scan completion events go out immediately */
2203 if (!priv
->user_requested_scan
) {
2204 schedule_delayed_work(&priv
->scan_event
,
2205 round_jiffies_relative(msecs_to_jiffies(4000)));
2207 priv
->user_requested_scan
= 0;
2208 mod_delayed_work(system_wq
, &priv
->scan_event
, 0);
2212 #ifdef CONFIG_IPW2100_DEBUG
2213 #define IPW2100_HANDLER(v, f) { v, f, # v }
2214 struct ipw2100_status_indicator
{
2216 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2220 #define IPW2100_HANDLER(v, f) { v, f }
2221 struct ipw2100_status_indicator
{
2223 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2225 #endif /* CONFIG_IPW2100_DEBUG */
2227 static void isr_indicate_scanning(struct ipw2100_priv
*priv
, u32 status
)
2229 IPW_DEBUG_SCAN("Scanning...\n");
2230 priv
->status
|= STATUS_SCANNING
;
2233 static const struct ipw2100_status_indicator status_handlers
[] = {
2234 IPW2100_HANDLER(IPW_STATE_INITIALIZED
, NULL
),
2235 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND
, NULL
),
2236 IPW2100_HANDLER(IPW_STATE_ASSOCIATED
, isr_indicate_associated
),
2237 IPW2100_HANDLER(IPW_STATE_ASSN_LOST
, isr_indicate_association_lost
),
2238 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED
, NULL
),
2239 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE
, isr_scan_complete
),
2240 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP
, NULL
),
2241 IPW2100_HANDLER(IPW_STATE_LEFT_PSP
, NULL
),
2242 IPW2100_HANDLER(IPW_STATE_RF_KILL
, isr_indicate_rf_kill
),
2243 IPW2100_HANDLER(IPW_STATE_DISABLED
, NULL
),
2244 IPW2100_HANDLER(IPW_STATE_POWER_DOWN
, NULL
),
2245 IPW2100_HANDLER(IPW_STATE_SCANNING
, isr_indicate_scanning
),
2246 IPW2100_HANDLER(-1, NULL
)
2249 static void isr_status_change(struct ipw2100_priv
*priv
, int status
)
2253 if (status
== IPW_STATE_SCANNING
&&
2254 priv
->status
& STATUS_ASSOCIATED
&&
2255 !(priv
->status
& STATUS_SCANNING
)) {
2256 IPW_DEBUG_INFO("Scan detected while associated, with "
2257 "no scan request. Restarting firmware.\n");
2259 /* Wake up any sleeping jobs */
2260 schedule_reset(priv
);
2263 for (i
= 0; status_handlers
[i
].status
!= -1; i
++) {
2264 if (status
== status_handlers
[i
].status
) {
2265 IPW_DEBUG_NOTIF("Status change: %s\n",
2266 status_handlers
[i
].name
);
2267 if (status_handlers
[i
].cb
)
2268 status_handlers
[i
].cb(priv
, status
);
2269 priv
->wstats
.status
= status
;
2274 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status
);
2277 static void isr_rx_complete_command(struct ipw2100_priv
*priv
,
2278 struct ipw2100_cmd_header
*cmd
)
2280 #ifdef CONFIG_IPW2100_DEBUG
2281 if (cmd
->host_command_reg
< ARRAY_SIZE(command_types
)) {
2282 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2283 command_types
[cmd
->host_command_reg
],
2284 cmd
->host_command_reg
);
2287 if (cmd
->host_command_reg
== HOST_COMPLETE
)
2288 priv
->status
|= STATUS_ENABLED
;
2290 if (cmd
->host_command_reg
== CARD_DISABLE
)
2291 priv
->status
&= ~STATUS_ENABLED
;
2293 priv
->status
&= ~STATUS_CMD_ACTIVE
;
2295 wake_up_interruptible(&priv
->wait_command_queue
);
2298 #ifdef CONFIG_IPW2100_DEBUG
2299 static const char *frame_types
[] = {
2300 "COMMAND_STATUS_VAL",
2301 "STATUS_CHANGE_VAL",
2304 "HOST_NOTIFICATION_VAL"
2308 static int ipw2100_alloc_skb(struct ipw2100_priv
*priv
,
2309 struct ipw2100_rx_packet
*packet
)
2311 packet
->skb
= dev_alloc_skb(sizeof(struct ipw2100_rx
));
2315 packet
->rxp
= (struct ipw2100_rx
*)packet
->skb
->data
;
2316 packet
->dma_addr
= pci_map_single(priv
->pci_dev
, packet
->skb
->data
,
2317 sizeof(struct ipw2100_rx
),
2318 PCI_DMA_FROMDEVICE
);
2319 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2325 #define SEARCH_ERROR 0xffffffff
2326 #define SEARCH_FAIL 0xfffffffe
2327 #define SEARCH_SUCCESS 0xfffffff0
2328 #define SEARCH_DISCARD 0
2329 #define SEARCH_SNAPSHOT 1
2331 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2332 static void ipw2100_snapshot_free(struct ipw2100_priv
*priv
)
2335 if (!priv
->snapshot
[0])
2337 for (i
= 0; i
< 0x30; i
++)
2338 kfree(priv
->snapshot
[i
]);
2339 priv
->snapshot
[0] = NULL
;
2342 #ifdef IPW2100_DEBUG_C3
2343 static int ipw2100_snapshot_alloc(struct ipw2100_priv
*priv
)
2346 if (priv
->snapshot
[0])
2348 for (i
= 0; i
< 0x30; i
++) {
2349 priv
->snapshot
[i
] = kmalloc(0x1000, GFP_ATOMIC
);
2350 if (!priv
->snapshot
[i
]) {
2351 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2352 "buffer %d\n", priv
->net_dev
->name
, i
);
2354 kfree(priv
->snapshot
[--i
]);
2355 priv
->snapshot
[0] = NULL
;
2363 static u32
ipw2100_match_buf(struct ipw2100_priv
*priv
, u8
* in_buf
,
2364 size_t len
, int mode
)
2372 if (mode
== SEARCH_SNAPSHOT
) {
2373 if (!ipw2100_snapshot_alloc(priv
))
2374 mode
= SEARCH_DISCARD
;
2377 for (ret
= SEARCH_FAIL
, i
= 0; i
< 0x30000; i
+= 4) {
2378 read_nic_dword(priv
->net_dev
, i
, &tmp
);
2379 if (mode
== SEARCH_SNAPSHOT
)
2380 *(u32
*) SNAPSHOT_ADDR(i
) = tmp
;
2381 if (ret
== SEARCH_FAIL
) {
2383 for (j
= 0; j
< 4; j
++) {
2392 if ((s
- in_buf
) == len
)
2393 ret
= (i
+ j
) - len
+ 1;
2395 } else if (mode
== SEARCH_DISCARD
)
2405 * 0) Disconnect the SKB from the firmware (just unmap)
2406 * 1) Pack the ETH header into the SKB
2407 * 2) Pass the SKB to the network stack
2409 * When packet is provided by the firmware, it contains the following:
2414 * The size of the constructed ethernet
2417 #ifdef IPW2100_RX_DEBUG
2418 static u8 packet_data
[IPW_RX_NIC_BUFFER_LENGTH
];
2421 static void ipw2100_corruption_detected(struct ipw2100_priv
*priv
, int i
)
2423 #ifdef IPW2100_DEBUG_C3
2424 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2429 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2430 i
* sizeof(struct ipw2100_status
));
2432 #ifdef IPW2100_DEBUG_C3
2433 /* Halt the firmware so we can get a good image */
2434 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
2435 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
2438 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
2439 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
2441 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
2445 match
= ipw2100_match_buf(priv
, (u8
*) status
,
2446 sizeof(struct ipw2100_status
),
2448 if (match
< SEARCH_SUCCESS
)
2449 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2450 "offset 0x%06X, length %d:\n",
2451 priv
->net_dev
->name
, match
,
2452 sizeof(struct ipw2100_status
));
2454 IPW_DEBUG_INFO("%s: No DMA status match in "
2455 "Firmware.\n", priv
->net_dev
->name
);
2457 printk_buf((u8
*) priv
->status_queue
.drv
,
2458 sizeof(struct ipw2100_status
) * RX_QUEUE_LENGTH
);
2461 priv
->fatal_error
= IPW2100_ERR_C3_CORRUPTION
;
2462 priv
->net_dev
->stats
.rx_errors
++;
2463 schedule_reset(priv
);
2466 static void isr_rx(struct ipw2100_priv
*priv
, int i
,
2467 struct libipw_rx_stats
*stats
)
2469 struct net_device
*dev
= priv
->net_dev
;
2470 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2471 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2473 IPW_DEBUG_RX("Handler...\n");
2475 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
))) {
2476 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2479 status
->frame_size
, skb_tailroom(packet
->skb
));
2480 dev
->stats
.rx_errors
++;
2484 if (unlikely(!netif_running(dev
))) {
2485 dev
->stats
.rx_errors
++;
2486 priv
->wstats
.discard
.misc
++;
2487 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2491 if (unlikely(priv
->ieee
->iw_mode
!= IW_MODE_MONITOR
&&
2492 !(priv
->status
& STATUS_ASSOCIATED
))) {
2493 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2494 priv
->wstats
.discard
.misc
++;
2498 pci_unmap_single(priv
->pci_dev
,
2500 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2502 skb_put(packet
->skb
, status
->frame_size
);
2504 #ifdef IPW2100_RX_DEBUG
2505 /* Make a copy of the frame so we can dump it to the logs if
2506 * libipw_rx fails */
2507 skb_copy_from_linear_data(packet
->skb
, packet_data
,
2508 min_t(u32
, status
->frame_size
,
2509 IPW_RX_NIC_BUFFER_LENGTH
));
2512 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2513 #ifdef IPW2100_RX_DEBUG
2514 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2516 printk_buf(IPW_DL_DROP
, packet_data
, status
->frame_size
);
2518 dev
->stats
.rx_errors
++;
2520 /* libipw_rx failed, so it didn't free the SKB */
2521 dev_kfree_skb_any(packet
->skb
);
2525 /* We need to allocate a new SKB and attach it to the RDB. */
2526 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2527 printk(KERN_WARNING DRV_NAME
": "
2528 "%s: Unable to allocate SKB onto RBD ring - disabling "
2529 "adapter.\n", dev
->name
);
2530 /* TODO: schedule adapter shutdown */
2531 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2534 /* Update the RDB entry */
2535 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2538 #ifdef CONFIG_IPW2100_MONITOR
2540 static void isr_rx_monitor(struct ipw2100_priv
*priv
, int i
,
2541 struct libipw_rx_stats
*stats
)
2543 struct net_device
*dev
= priv
->net_dev
;
2544 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2545 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2547 /* Magic struct that slots into the radiotap header -- no reason
2548 * to build this manually element by element, we can write it much
2549 * more efficiently than we can parse it. ORDER MATTERS HERE */
2551 struct ieee80211_radiotap_header rt_hdr
;
2552 s8 rt_dbmsignal
; /* signal in dbM, kluged to signed */
2555 IPW_DEBUG_RX("Handler...\n");
2557 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
) -
2558 sizeof(struct ipw_rt_hdr
))) {
2559 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2563 skb_tailroom(packet
->skb
));
2564 dev
->stats
.rx_errors
++;
2568 if (unlikely(!netif_running(dev
))) {
2569 dev
->stats
.rx_errors
++;
2570 priv
->wstats
.discard
.misc
++;
2571 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2575 if (unlikely(priv
->config
& CFG_CRC_CHECK
&&
2576 status
->flags
& IPW_STATUS_FLAG_CRC_ERROR
)) {
2577 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2578 dev
->stats
.rx_errors
++;
2582 pci_unmap_single(priv
->pci_dev
, packet
->dma_addr
,
2583 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2584 memmove(packet
->skb
->data
+ sizeof(struct ipw_rt_hdr
),
2585 packet
->skb
->data
, status
->frame_size
);
2587 ipw_rt
= (struct ipw_rt_hdr
*) packet
->skb
->data
;
2589 ipw_rt
->rt_hdr
.it_version
= PKTHDR_RADIOTAP_VERSION
;
2590 ipw_rt
->rt_hdr
.it_pad
= 0; /* always good to zero */
2591 ipw_rt
->rt_hdr
.it_len
= cpu_to_le16(sizeof(struct ipw_rt_hdr
)); /* total hdr+data */
2593 ipw_rt
->rt_hdr
.it_present
= cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL
);
2595 ipw_rt
->rt_dbmsignal
= status
->rssi
+ IPW2100_RSSI_TO_DBM
;
2597 skb_put(packet
->skb
, status
->frame_size
+ sizeof(struct ipw_rt_hdr
));
2599 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2600 dev
->stats
.rx_errors
++;
2602 /* libipw_rx failed, so it didn't free the SKB */
2603 dev_kfree_skb_any(packet
->skb
);
2607 /* We need to allocate a new SKB and attach it to the RDB. */
2608 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2610 "%s: Unable to allocate SKB onto RBD ring - disabling "
2611 "adapter.\n", dev
->name
);
2612 /* TODO: schedule adapter shutdown */
2613 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2616 /* Update the RDB entry */
2617 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2622 static int ipw2100_corruption_check(struct ipw2100_priv
*priv
, int i
)
2624 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2625 struct ipw2100_rx
*u
= priv
->rx_buffers
[i
].rxp
;
2626 u16 frame_type
= status
->status_fields
& STATUS_TYPE_MASK
;
2628 switch (frame_type
) {
2629 case COMMAND_STATUS_VAL
:
2630 return (status
->frame_size
!= sizeof(u
->rx_data
.command
));
2631 case STATUS_CHANGE_VAL
:
2632 return (status
->frame_size
!= sizeof(u
->rx_data
.status
));
2633 case HOST_NOTIFICATION_VAL
:
2634 return (status
->frame_size
< sizeof(u
->rx_data
.notification
));
2635 case P80211_DATA_VAL
:
2636 case P8023_DATA_VAL
:
2637 #ifdef CONFIG_IPW2100_MONITOR
2640 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2641 case IEEE80211_FTYPE_MGMT
:
2642 case IEEE80211_FTYPE_CTL
:
2644 case IEEE80211_FTYPE_DATA
:
2645 return (status
->frame_size
>
2646 IPW_MAX_802_11_PAYLOAD_LENGTH
);
2655 * ipw2100 interrupts are disabled at this point, and the ISR
2656 * is the only code that calls this method. So, we do not need
2657 * to play with any locks.
2659 * RX Queue works as follows:
2661 * Read index - firmware places packet in entry identified by the
2662 * Read index and advances Read index. In this manner,
2663 * Read index will always point to the next packet to
2664 * be filled--but not yet valid.
2666 * Write index - driver fills this entry with an unused RBD entry.
2667 * This entry has not filled by the firmware yet.
2669 * In between the W and R indexes are the RBDs that have been received
2670 * but not yet processed.
2672 * The process of handling packets will start at WRITE + 1 and advance
2673 * until it reaches the READ index.
2675 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2678 static void __ipw2100_rx_process(struct ipw2100_priv
*priv
)
2680 struct ipw2100_bd_queue
*rxq
= &priv
->rx_queue
;
2681 struct ipw2100_status_queue
*sq
= &priv
->status_queue
;
2682 struct ipw2100_rx_packet
*packet
;
2685 struct ipw2100_rx
*u
;
2686 struct libipw_rx_stats stats
= {
2687 .mac_time
= jiffies
,
2690 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_READ_INDEX
, &r
);
2691 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, &w
);
2693 if (r
>= rxq
->entries
) {
2694 IPW_DEBUG_RX("exit - bad read index\n");
2698 i
= (rxq
->next
+ 1) % rxq
->entries
;
2701 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2702 r, rxq->next, i); */
2704 packet
= &priv
->rx_buffers
[i
];
2706 /* Sync the DMA for the RX buffer so CPU is sure to get
2707 * the correct values */
2708 pci_dma_sync_single_for_cpu(priv
->pci_dev
, packet
->dma_addr
,
2709 sizeof(struct ipw2100_rx
),
2710 PCI_DMA_FROMDEVICE
);
2712 if (unlikely(ipw2100_corruption_check(priv
, i
))) {
2713 ipw2100_corruption_detected(priv
, i
);
2718 frame_type
= sq
->drv
[i
].status_fields
& STATUS_TYPE_MASK
;
2719 stats
.rssi
= sq
->drv
[i
].rssi
+ IPW2100_RSSI_TO_DBM
;
2720 stats
.len
= sq
->drv
[i
].frame_size
;
2723 if (stats
.rssi
!= 0)
2724 stats
.mask
|= LIBIPW_STATMASK_RSSI
;
2725 stats
.freq
= LIBIPW_24GHZ_BAND
;
2727 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2728 priv
->net_dev
->name
, frame_types
[frame_type
],
2731 switch (frame_type
) {
2732 case COMMAND_STATUS_VAL
:
2733 /* Reset Rx watchdog */
2734 isr_rx_complete_command(priv
, &u
->rx_data
.command
);
2737 case STATUS_CHANGE_VAL
:
2738 isr_status_change(priv
, u
->rx_data
.status
);
2741 case P80211_DATA_VAL
:
2742 case P8023_DATA_VAL
:
2743 #ifdef CONFIG_IPW2100_MONITOR
2744 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
2745 isr_rx_monitor(priv
, i
, &stats
);
2749 if (stats
.len
< sizeof(struct libipw_hdr_3addr
))
2751 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2752 case IEEE80211_FTYPE_MGMT
:
2753 libipw_rx_mgt(priv
->ieee
,
2754 &u
->rx_data
.header
, &stats
);
2757 case IEEE80211_FTYPE_CTL
:
2760 case IEEE80211_FTYPE_DATA
:
2761 isr_rx(priv
, i
, &stats
);
2769 /* clear status field associated with this RBD */
2770 rxq
->drv
[i
].status
.info
.field
= 0;
2772 i
= (i
+ 1) % rxq
->entries
;
2776 /* backtrack one entry, wrapping to end if at 0 */
2777 rxq
->next
= (i
? i
: rxq
->entries
) - 1;
2779 write_register(priv
->net_dev
,
2780 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, rxq
->next
);
2785 * __ipw2100_tx_process
2787 * This routine will determine whether the next packet on
2788 * the fw_pend_list has been processed by the firmware yet.
2790 * If not, then it does nothing and returns.
2792 * If so, then it removes the item from the fw_pend_list, frees
2793 * any associated storage, and places the item back on the
2794 * free list of its source (either msg_free_list or tx_free_list)
2796 * TX Queue works as follows:
2798 * Read index - points to the next TBD that the firmware will
2799 * process. The firmware will read the data, and once
2800 * done processing, it will advance the Read index.
2802 * Write index - driver fills this entry with an constructed TBD
2803 * entry. The Write index is not advanced until the
2804 * packet has been configured.
2806 * In between the W and R indexes are the TBDs that have NOT been
2807 * processed. Lagging behind the R index are packets that have
2808 * been processed but have not been freed by the driver.
2810 * In order to free old storage, an internal index will be maintained
2811 * that points to the next packet to be freed. When all used
2812 * packets have been freed, the oldest index will be the same as the
2813 * firmware's read index.
2815 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2817 * Because the TBD structure can not contain arbitrary data, the
2818 * driver must keep an internal queue of cached allocations such that
2819 * it can put that data back into the tx_free_list and msg_free_list
2820 * for use by future command and data packets.
2823 static int __ipw2100_tx_process(struct ipw2100_priv
*priv
)
2825 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
2826 struct ipw2100_bd
*tbd
;
2827 struct list_head
*element
;
2828 struct ipw2100_tx_packet
*packet
;
2829 int descriptors_used
;
2831 u32 r
, w
, frag_num
= 0;
2833 if (list_empty(&priv
->fw_pend_list
))
2836 element
= priv
->fw_pend_list
.next
;
2838 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
2839 tbd
= &txq
->drv
[packet
->index
];
2841 /* Determine how many TBD entries must be finished... */
2842 switch (packet
->type
) {
2844 /* COMMAND uses only one slot; don't advance */
2845 descriptors_used
= 1;
2850 /* DATA uses two slots; advance and loop position. */
2851 descriptors_used
= tbd
->num_fragments
;
2852 frag_num
= tbd
->num_fragments
- 1;
2853 e
= txq
->oldest
+ frag_num
;
2858 printk(KERN_WARNING DRV_NAME
": %s: Bad fw_pend_list entry!\n",
2859 priv
->net_dev
->name
);
2863 /* if the last TBD is not done by NIC yet, then packet is
2864 * not ready to be released.
2867 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
2869 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
2872 printk(KERN_WARNING DRV_NAME
": %s: write index mismatch\n",
2873 priv
->net_dev
->name
);
2876 * txq->next is the index of the last packet written txq->oldest is
2877 * the index of the r is the index of the next packet to be read by
2882 * Quick graphic to help you visualize the following
2883 * if / else statement
2885 * ===>| s---->|===============
2887 * | a | b | c | d | e | f | g | h | i | j | k | l
2891 * w - updated by driver
2892 * r - updated by firmware
2893 * s - start of oldest BD entry (txq->oldest)
2894 * e - end of oldest BD entry
2897 if (!((r
<= w
&& (e
< r
|| e
>= w
)) || (e
< r
&& e
>= w
))) {
2898 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2903 DEC_STAT(&priv
->fw_pend_stat
);
2905 #ifdef CONFIG_IPW2100_DEBUG
2908 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2910 (u32
) (txq
->nic
+ i
* sizeof(struct ipw2100_bd
)),
2911 txq
->drv
[i
].host_addr
, txq
->drv
[i
].buf_length
);
2913 if (packet
->type
== DATA
) {
2914 i
= (i
+ 1) % txq
->entries
;
2916 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2918 (u32
) (txq
->nic
+ i
*
2919 sizeof(struct ipw2100_bd
)),
2920 (u32
) txq
->drv
[i
].host_addr
,
2921 txq
->drv
[i
].buf_length
);
2926 switch (packet
->type
) {
2928 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 0)
2929 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2930 "Expecting DATA TBD but pulled "
2931 "something else: ids %d=%d.\n",
2932 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2934 /* DATA packet; we have to unmap and free the SKB */
2935 for (i
= 0; i
< frag_num
; i
++) {
2936 tbd
= &txq
->drv
[(packet
->index
+ 1 + i
) % txq
->entries
];
2938 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2939 (packet
->index
+ 1 + i
) % txq
->entries
,
2940 tbd
->host_addr
, tbd
->buf_length
);
2942 pci_unmap_single(priv
->pci_dev
,
2944 tbd
->buf_length
, PCI_DMA_TODEVICE
);
2947 libipw_txb_free(packet
->info
.d_struct
.txb
);
2948 packet
->info
.d_struct
.txb
= NULL
;
2950 list_add_tail(element
, &priv
->tx_free_list
);
2951 INC_STAT(&priv
->tx_free_stat
);
2953 /* We have a free slot in the Tx queue, so wake up the
2954 * transmit layer if it is stopped. */
2955 if (priv
->status
& STATUS_ASSOCIATED
)
2956 netif_wake_queue(priv
->net_dev
);
2958 /* A packet was processed by the hardware, so update the
2960 priv
->net_dev
->trans_start
= jiffies
;
2965 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 1)
2966 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2967 "Expecting COMMAND TBD but pulled "
2968 "something else: ids %d=%d.\n",
2969 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2971 #ifdef CONFIG_IPW2100_DEBUG
2972 if (packet
->info
.c_struct
.cmd
->host_command_reg
<
2973 ARRAY_SIZE(command_types
))
2974 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
2975 command_types
[packet
->info
.c_struct
.cmd
->
2977 packet
->info
.c_struct
.cmd
->
2979 packet
->info
.c_struct
.cmd
->cmd_status_reg
);
2982 list_add_tail(element
, &priv
->msg_free_list
);
2983 INC_STAT(&priv
->msg_free_stat
);
2987 /* advance oldest used TBD pointer to start of next entry */
2988 txq
->oldest
= (e
+ 1) % txq
->entries
;
2989 /* increase available TBDs number */
2990 txq
->available
+= descriptors_used
;
2991 SET_STAT(&priv
->txq_stat
, txq
->available
);
2993 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
2994 jiffies
- packet
->jiffy_start
);
2996 return (!list_empty(&priv
->fw_pend_list
));
2999 static inline void __ipw2100_tx_complete(struct ipw2100_priv
*priv
)
3003 while (__ipw2100_tx_process(priv
) && i
< 200)
3007 printk(KERN_WARNING DRV_NAME
": "
3008 "%s: Driver is running slow (%d iters).\n",
3009 priv
->net_dev
->name
, i
);
3013 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
)
3015 struct list_head
*element
;
3016 struct ipw2100_tx_packet
*packet
;
3017 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3018 struct ipw2100_bd
*tbd
;
3019 int next
= txq
->next
;
3021 while (!list_empty(&priv
->msg_pend_list
)) {
3022 /* if there isn't enough space in TBD queue, then
3023 * don't stuff a new one in.
3024 * NOTE: 3 are needed as a command will take one,
3025 * and there is a minimum of 2 that must be
3026 * maintained between the r and w indexes
3028 if (txq
->available
<= 3) {
3029 IPW_DEBUG_TX("no room in tx_queue\n");
3033 element
= priv
->msg_pend_list
.next
;
3035 DEC_STAT(&priv
->msg_pend_stat
);
3037 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3039 IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n",
3040 &txq
->drv
[txq
->next
],
3041 (u32
) (txq
->nic
+ txq
->next
*
3042 sizeof(struct ipw2100_bd
)));
3044 packet
->index
= txq
->next
;
3046 tbd
= &txq
->drv
[txq
->next
];
3048 /* initialize TBD */
3049 tbd
->host_addr
= packet
->info
.c_struct
.cmd_phys
;
3050 tbd
->buf_length
= sizeof(struct ipw2100_cmd_header
);
3051 /* not marking number of fragments causes problems
3052 * with f/w debug version */
3053 tbd
->num_fragments
= 1;
3054 tbd
->status
.info
.field
=
3055 IPW_BD_STATUS_TX_FRAME_COMMAND
|
3056 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3058 /* update TBD queue counters */
3060 txq
->next
%= txq
->entries
;
3062 DEC_STAT(&priv
->txq_stat
);
3064 list_add_tail(element
, &priv
->fw_pend_list
);
3065 INC_STAT(&priv
->fw_pend_stat
);
3068 if (txq
->next
!= next
) {
3069 /* kick off the DMA by notifying firmware the
3070 * write index has moved; make sure TBD stores are sync'd */
3072 write_register(priv
->net_dev
,
3073 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3079 * ipw2100_tx_send_data
3082 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
)
3084 struct list_head
*element
;
3085 struct ipw2100_tx_packet
*packet
;
3086 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3087 struct ipw2100_bd
*tbd
;
3088 int next
= txq
->next
;
3090 struct ipw2100_data_header
*ipw_hdr
;
3091 struct libipw_hdr_3addr
*hdr
;
3093 while (!list_empty(&priv
->tx_pend_list
)) {
3094 /* if there isn't enough space in TBD queue, then
3095 * don't stuff a new one in.
3096 * NOTE: 4 are needed as a data will take two,
3097 * and there is a minimum of 2 that must be
3098 * maintained between the r and w indexes
3100 element
= priv
->tx_pend_list
.next
;
3101 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3103 if (unlikely(1 + packet
->info
.d_struct
.txb
->nr_frags
>
3105 /* TODO: Support merging buffers if more than
3106 * IPW_MAX_BDS are used */
3107 IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
3108 "Increase fragmentation level.\n",
3109 priv
->net_dev
->name
);
3112 if (txq
->available
<= 3 + packet
->info
.d_struct
.txb
->nr_frags
) {
3113 IPW_DEBUG_TX("no room in tx_queue\n");
3118 DEC_STAT(&priv
->tx_pend_stat
);
3120 tbd
= &txq
->drv
[txq
->next
];
3122 packet
->index
= txq
->next
;
3124 ipw_hdr
= packet
->info
.d_struct
.data
;
3125 hdr
= (struct libipw_hdr_3addr
*)packet
->info
.d_struct
.txb
->
3128 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
) {
3129 /* To DS: Addr1 = BSSID, Addr2 = SA,
3131 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3132 memcpy(ipw_hdr
->dst_addr
, hdr
->addr3
, ETH_ALEN
);
3133 } else if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
3134 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3136 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3137 memcpy(ipw_hdr
->dst_addr
, hdr
->addr1
, ETH_ALEN
);
3140 ipw_hdr
->host_command_reg
= SEND
;
3141 ipw_hdr
->host_command_reg1
= 0;
3143 /* For now we only support host based encryption */
3144 ipw_hdr
->needs_encryption
= 0;
3145 ipw_hdr
->encrypted
= packet
->info
.d_struct
.txb
->encrypted
;
3146 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3147 ipw_hdr
->fragment_size
=
3148 packet
->info
.d_struct
.txb
->frag_size
-
3151 ipw_hdr
->fragment_size
= 0;
3153 tbd
->host_addr
= packet
->info
.d_struct
.data_phys
;
3154 tbd
->buf_length
= sizeof(struct ipw2100_data_header
);
3155 tbd
->num_fragments
= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3156 tbd
->status
.info
.field
=
3157 IPW_BD_STATUS_TX_FRAME_802_3
|
3158 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3160 txq
->next
%= txq
->entries
;
3162 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3163 packet
->index
, tbd
->host_addr
, tbd
->buf_length
);
3164 #ifdef CONFIG_IPW2100_DEBUG
3165 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3166 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3167 packet
->info
.d_struct
.txb
->nr_frags
);
3170 for (i
= 0; i
< packet
->info
.d_struct
.txb
->nr_frags
; i
++) {
3171 tbd
= &txq
->drv
[txq
->next
];
3172 if (i
== packet
->info
.d_struct
.txb
->nr_frags
- 1)
3173 tbd
->status
.info
.field
=
3174 IPW_BD_STATUS_TX_FRAME_802_3
|
3175 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3177 tbd
->status
.info
.field
=
3178 IPW_BD_STATUS_TX_FRAME_802_3
|
3179 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3181 tbd
->buf_length
= packet
->info
.d_struct
.txb
->
3182 fragments
[i
]->len
- LIBIPW_3ADDR_LEN
;
3184 tbd
->host_addr
= pci_map_single(priv
->pci_dev
,
3185 packet
->info
.d_struct
.
3192 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3193 txq
->next
, tbd
->host_addr
,
3196 pci_dma_sync_single_for_device(priv
->pci_dev
,
3202 txq
->next
%= txq
->entries
;
3205 txq
->available
-= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3206 SET_STAT(&priv
->txq_stat
, txq
->available
);
3208 list_add_tail(element
, &priv
->fw_pend_list
);
3209 INC_STAT(&priv
->fw_pend_stat
);
3212 if (txq
->next
!= next
) {
3213 /* kick off the DMA by notifying firmware the
3214 * write index has moved; make sure TBD stores are sync'd */
3215 write_register(priv
->net_dev
,
3216 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3221 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
)
3223 struct net_device
*dev
= priv
->net_dev
;
3224 unsigned long flags
;
3227 spin_lock_irqsave(&priv
->low_lock
, flags
);
3228 ipw2100_disable_interrupts(priv
);
3230 read_register(dev
, IPW_REG_INTA
, &inta
);
3232 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3233 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3238 /* We do not loop and keep polling for more interrupts as this
3239 * is frowned upon and doesn't play nicely with other potentially
3241 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3242 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3244 if (inta
& IPW2100_INTA_FATAL_ERROR
) {
3245 printk(KERN_WARNING DRV_NAME
3246 ": Fatal interrupt. Scheduling firmware restart.\n");
3248 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FATAL_ERROR
);
3250 read_nic_dword(dev
, IPW_NIC_FATAL_ERROR
, &priv
->fatal_error
);
3251 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3252 priv
->net_dev
->name
, priv
->fatal_error
);
3254 read_nic_dword(dev
, IPW_ERROR_ADDR(priv
->fatal_error
), &tmp
);
3255 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3256 priv
->net_dev
->name
, tmp
);
3258 /* Wake up any sleeping jobs */
3259 schedule_reset(priv
);
3262 if (inta
& IPW2100_INTA_PARITY_ERROR
) {
3263 printk(KERN_ERR DRV_NAME
3264 ": ***** PARITY ERROR INTERRUPT !!!!\n");
3266 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_PARITY_ERROR
);
3269 if (inta
& IPW2100_INTA_RX_TRANSFER
) {
3270 IPW_DEBUG_ISR("RX interrupt\n");
3272 priv
->rx_interrupts
++;
3274 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_RX_TRANSFER
);
3276 __ipw2100_rx_process(priv
);
3277 __ipw2100_tx_complete(priv
);
3280 if (inta
& IPW2100_INTA_TX_TRANSFER
) {
3281 IPW_DEBUG_ISR("TX interrupt\n");
3283 priv
->tx_interrupts
++;
3285 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_TRANSFER
);
3287 __ipw2100_tx_complete(priv
);
3288 ipw2100_tx_send_commands(priv
);
3289 ipw2100_tx_send_data(priv
);
3292 if (inta
& IPW2100_INTA_TX_COMPLETE
) {
3293 IPW_DEBUG_ISR("TX complete\n");
3295 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_COMPLETE
);
3297 __ipw2100_tx_complete(priv
);
3300 if (inta
& IPW2100_INTA_EVENT_INTERRUPT
) {
3301 /* ipw2100_handle_event(dev); */
3303 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_EVENT_INTERRUPT
);
3306 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
3307 IPW_DEBUG_ISR("FW init done interrupt\n");
3310 read_register(dev
, IPW_REG_INTA
, &tmp
);
3311 if (tmp
& (IPW2100_INTA_FATAL_ERROR
|
3312 IPW2100_INTA_PARITY_ERROR
)) {
3313 write_register(dev
, IPW_REG_INTA
,
3314 IPW2100_INTA_FATAL_ERROR
|
3315 IPW2100_INTA_PARITY_ERROR
);
3318 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FW_INIT_DONE
);
3321 if (inta
& IPW2100_INTA_STATUS_CHANGE
) {
3322 IPW_DEBUG_ISR("Status change interrupt\n");
3324 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_STATUS_CHANGE
);
3327 if (inta
& IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
) {
3328 IPW_DEBUG_ISR("slave host mode interrupt\n");
3330 write_register(dev
, IPW_REG_INTA
,
3331 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
);
3335 ipw2100_enable_interrupts(priv
);
3337 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3339 IPW_DEBUG_ISR("exit\n");
3342 static irqreturn_t
ipw2100_interrupt(int irq
, void *data
)
3344 struct ipw2100_priv
*priv
= data
;
3345 u32 inta
, inta_mask
;
3350 spin_lock(&priv
->low_lock
);
3352 /* We check to see if we should be ignoring interrupts before
3353 * we touch the hardware. During ucode load if we try and handle
3354 * an interrupt we can cause keyboard problems as well as cause
3355 * the ucode to fail to initialize */
3356 if (!(priv
->status
& STATUS_INT_ENABLED
)) {
3361 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
3362 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
3364 if (inta
== 0xFFFFFFFF) {
3365 /* Hardware disappeared */
3366 printk(KERN_WARNING DRV_NAME
": IRQ INTA == 0xFFFFFFFF\n");
3370 inta
&= IPW_INTERRUPT_MASK
;
3372 if (!(inta
& inta_mask
)) {
3373 /* Shared interrupt */
3377 /* We disable the hardware interrupt here just to prevent unneeded
3378 * calls to be made. We disable this again within the actual
3379 * work tasklet, so if another part of the code re-enables the
3380 * interrupt, that is fine */
3381 ipw2100_disable_interrupts(priv
);
3383 tasklet_schedule(&priv
->irq_tasklet
);
3384 spin_unlock(&priv
->low_lock
);
3388 spin_unlock(&priv
->low_lock
);
3392 static netdev_tx_t
ipw2100_tx(struct libipw_txb
*txb
,
3393 struct net_device
*dev
, int pri
)
3395 struct ipw2100_priv
*priv
= libipw_priv(dev
);
3396 struct list_head
*element
;
3397 struct ipw2100_tx_packet
*packet
;
3398 unsigned long flags
;
3400 spin_lock_irqsave(&priv
->low_lock
, flags
);
3402 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
3403 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3404 priv
->net_dev
->stats
.tx_carrier_errors
++;
3405 netif_stop_queue(dev
);
3409 if (list_empty(&priv
->tx_free_list
))
3412 element
= priv
->tx_free_list
.next
;
3413 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3415 packet
->info
.d_struct
.txb
= txb
;
3417 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb
->fragments
[0]->len
);
3418 printk_buf(IPW_DL_TX
, txb
->fragments
[0]->data
, txb
->fragments
[0]->len
);
3420 packet
->jiffy_start
= jiffies
;
3423 DEC_STAT(&priv
->tx_free_stat
);
3425 list_add_tail(element
, &priv
->tx_pend_list
);
3426 INC_STAT(&priv
->tx_pend_stat
);
3428 ipw2100_tx_send_data(priv
);
3430 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3431 return NETDEV_TX_OK
;
3434 netif_stop_queue(dev
);
3435 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3436 return NETDEV_TX_BUSY
;
3439 static int ipw2100_msg_allocate(struct ipw2100_priv
*priv
)
3441 int i
, j
, err
= -EINVAL
;
3446 kmalloc(IPW_COMMAND_POOL_SIZE
* sizeof(struct ipw2100_tx_packet
),
3448 if (!priv
->msg_buffers
)
3451 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3452 v
= pci_alloc_consistent(priv
->pci_dev
,
3453 sizeof(struct ipw2100_cmd_header
), &p
);
3455 printk(KERN_ERR DRV_NAME
": "
3456 "%s: PCI alloc failed for msg "
3457 "buffers.\n", priv
->net_dev
->name
);
3462 memset(v
, 0, sizeof(struct ipw2100_cmd_header
));
3464 priv
->msg_buffers
[i
].type
= COMMAND
;
3465 priv
->msg_buffers
[i
].info
.c_struct
.cmd
=
3466 (struct ipw2100_cmd_header
*)v
;
3467 priv
->msg_buffers
[i
].info
.c_struct
.cmd_phys
= p
;
3470 if (i
== IPW_COMMAND_POOL_SIZE
)
3473 for (j
= 0; j
< i
; j
++) {
3474 pci_free_consistent(priv
->pci_dev
,
3475 sizeof(struct ipw2100_cmd_header
),
3476 priv
->msg_buffers
[j
].info
.c_struct
.cmd
,
3477 priv
->msg_buffers
[j
].info
.c_struct
.
3481 kfree(priv
->msg_buffers
);
3482 priv
->msg_buffers
= NULL
;
3487 static int ipw2100_msg_initialize(struct ipw2100_priv
*priv
)
3491 INIT_LIST_HEAD(&priv
->msg_free_list
);
3492 INIT_LIST_HEAD(&priv
->msg_pend_list
);
3494 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++)
3495 list_add_tail(&priv
->msg_buffers
[i
].list
, &priv
->msg_free_list
);
3496 SET_STAT(&priv
->msg_free_stat
, i
);
3501 static void ipw2100_msg_free(struct ipw2100_priv
*priv
)
3505 if (!priv
->msg_buffers
)
3508 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3509 pci_free_consistent(priv
->pci_dev
,
3510 sizeof(struct ipw2100_cmd_header
),
3511 priv
->msg_buffers
[i
].info
.c_struct
.cmd
,
3512 priv
->msg_buffers
[i
].info
.c_struct
.
3516 kfree(priv
->msg_buffers
);
3517 priv
->msg_buffers
= NULL
;
3520 static ssize_t
show_pci(struct device
*d
, struct device_attribute
*attr
,
3523 struct pci_dev
*pci_dev
= container_of(d
, struct pci_dev
, dev
);
3528 for (i
= 0; i
< 16; i
++) {
3529 out
+= sprintf(out
, "[%08X] ", i
* 16);
3530 for (j
= 0; j
< 16; j
+= 4) {
3531 pci_read_config_dword(pci_dev
, i
* 16 + j
, &val
);
3532 out
+= sprintf(out
, "%08X ", val
);
3534 out
+= sprintf(out
, "\n");
3540 static DEVICE_ATTR(pci
, S_IRUGO
, show_pci
, NULL
);
3542 static ssize_t
show_cfg(struct device
*d
, struct device_attribute
*attr
,
3545 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3546 return sprintf(buf
, "0x%08x\n", (int)p
->config
);
3549 static DEVICE_ATTR(cfg
, S_IRUGO
, show_cfg
, NULL
);
3551 static ssize_t
show_status(struct device
*d
, struct device_attribute
*attr
,
3554 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3555 return sprintf(buf
, "0x%08x\n", (int)p
->status
);
3558 static DEVICE_ATTR(status
, S_IRUGO
, show_status
, NULL
);
3560 static ssize_t
show_capability(struct device
*d
, struct device_attribute
*attr
,
3563 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3564 return sprintf(buf
, "0x%08x\n", (int)p
->capability
);
3567 static DEVICE_ATTR(capability
, S_IRUGO
, show_capability
, NULL
);
3569 #define IPW2100_REG(x) { IPW_ ##x, #x }
3570 static const struct {
3574 IPW2100_REG(REG_GP_CNTRL
),
3575 IPW2100_REG(REG_GPIO
),
3576 IPW2100_REG(REG_INTA
),
3577 IPW2100_REG(REG_INTA_MASK
), IPW2100_REG(REG_RESET_REG
),};
3578 #define IPW2100_NIC(x, s) { x, #x, s }
3579 static const struct {
3584 IPW2100_NIC(IPW2100_CONTROL_REG
, 2),
3585 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3586 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3587 static const struct {
3592 IPW2100_ORD(STAT_TX_HOST_REQUESTS
, "requested Host Tx's (MSDU)"),
3593 IPW2100_ORD(STAT_TX_HOST_COMPLETE
,
3594 "successful Host Tx's (MSDU)"),
3595 IPW2100_ORD(STAT_TX_DIR_DATA
,
3596 "successful Directed Tx's (MSDU)"),
3597 IPW2100_ORD(STAT_TX_DIR_DATA1
,
3598 "successful Directed Tx's (MSDU) @ 1MB"),
3599 IPW2100_ORD(STAT_TX_DIR_DATA2
,
3600 "successful Directed Tx's (MSDU) @ 2MB"),
3601 IPW2100_ORD(STAT_TX_DIR_DATA5_5
,
3602 "successful Directed Tx's (MSDU) @ 5_5MB"),
3603 IPW2100_ORD(STAT_TX_DIR_DATA11
,
3604 "successful Directed Tx's (MSDU) @ 11MB"),
3605 IPW2100_ORD(STAT_TX_NODIR_DATA1
,
3606 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3607 IPW2100_ORD(STAT_TX_NODIR_DATA2
,
3608 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3609 IPW2100_ORD(STAT_TX_NODIR_DATA5_5
,
3610 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3611 IPW2100_ORD(STAT_TX_NODIR_DATA11
,
3612 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3613 IPW2100_ORD(STAT_NULL_DATA
, "successful NULL data Tx's"),
3614 IPW2100_ORD(STAT_TX_RTS
, "successful Tx RTS"),
3615 IPW2100_ORD(STAT_TX_CTS
, "successful Tx CTS"),
3616 IPW2100_ORD(STAT_TX_ACK
, "successful Tx ACK"),
3617 IPW2100_ORD(STAT_TX_ASSN
, "successful Association Tx's"),
3618 IPW2100_ORD(STAT_TX_ASSN_RESP
,
3619 "successful Association response Tx's"),
3620 IPW2100_ORD(STAT_TX_REASSN
,
3621 "successful Reassociation Tx's"),
3622 IPW2100_ORD(STAT_TX_REASSN_RESP
,
3623 "successful Reassociation response Tx's"),
3624 IPW2100_ORD(STAT_TX_PROBE
,
3625 "probes successfully transmitted"),
3626 IPW2100_ORD(STAT_TX_PROBE_RESP
,
3627 "probe responses successfully transmitted"),
3628 IPW2100_ORD(STAT_TX_BEACON
, "tx beacon"),
3629 IPW2100_ORD(STAT_TX_ATIM
, "Tx ATIM"),
3630 IPW2100_ORD(STAT_TX_DISASSN
,
3631 "successful Disassociation TX"),
3632 IPW2100_ORD(STAT_TX_AUTH
, "successful Authentication Tx"),
3633 IPW2100_ORD(STAT_TX_DEAUTH
,
3634 "successful Deauthentication TX"),
3635 IPW2100_ORD(STAT_TX_TOTAL_BYTES
,
3636 "Total successful Tx data bytes"),
3637 IPW2100_ORD(STAT_TX_RETRIES
, "Tx retries"),
3638 IPW2100_ORD(STAT_TX_RETRY1
, "Tx retries at 1MBPS"),
3639 IPW2100_ORD(STAT_TX_RETRY2
, "Tx retries at 2MBPS"),
3640 IPW2100_ORD(STAT_TX_RETRY5_5
, "Tx retries at 5.5MBPS"),
3641 IPW2100_ORD(STAT_TX_RETRY11
, "Tx retries at 11MBPS"),
3642 IPW2100_ORD(STAT_TX_FAILURES
, "Tx Failures"),
3643 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP
,
3644 "times max tries in a hop failed"),
3645 IPW2100_ORD(STAT_TX_DISASSN_FAIL
,
3646 "times disassociation failed"),
3647 IPW2100_ORD(STAT_TX_ERR_CTS
, "missed/bad CTS frames"),
3648 IPW2100_ORD(STAT_TX_ERR_ACK
, "tx err due to acks"),
3649 IPW2100_ORD(STAT_RX_HOST
, "packets passed to host"),
3650 IPW2100_ORD(STAT_RX_DIR_DATA
, "directed packets"),
3651 IPW2100_ORD(STAT_RX_DIR_DATA1
, "directed packets at 1MB"),
3652 IPW2100_ORD(STAT_RX_DIR_DATA2
, "directed packets at 2MB"),
3653 IPW2100_ORD(STAT_RX_DIR_DATA5_5
,
3654 "directed packets at 5.5MB"),
3655 IPW2100_ORD(STAT_RX_DIR_DATA11
, "directed packets at 11MB"),
3656 IPW2100_ORD(STAT_RX_NODIR_DATA
, "nondirected packets"),
3657 IPW2100_ORD(STAT_RX_NODIR_DATA1
,
3658 "nondirected packets at 1MB"),
3659 IPW2100_ORD(STAT_RX_NODIR_DATA2
,
3660 "nondirected packets at 2MB"),
3661 IPW2100_ORD(STAT_RX_NODIR_DATA5_5
,
3662 "nondirected packets at 5.5MB"),
3663 IPW2100_ORD(STAT_RX_NODIR_DATA11
,
3664 "nondirected packets at 11MB"),
3665 IPW2100_ORD(STAT_RX_NULL_DATA
, "null data rx's"),
3666 IPW2100_ORD(STAT_RX_RTS
, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS
,
3668 IPW2100_ORD(STAT_RX_ACK
, "Rx ACK"),
3669 IPW2100_ORD(STAT_RX_CFEND
, "Rx CF End"),
3670 IPW2100_ORD(STAT_RX_CFEND_ACK
, "Rx CF End + CF Ack"),
3671 IPW2100_ORD(STAT_RX_ASSN
, "Association Rx's"),
3672 IPW2100_ORD(STAT_RX_ASSN_RESP
, "Association response Rx's"),
3673 IPW2100_ORD(STAT_RX_REASSN
, "Reassociation Rx's"),
3674 IPW2100_ORD(STAT_RX_REASSN_RESP
,
3675 "Reassociation response Rx's"),
3676 IPW2100_ORD(STAT_RX_PROBE
, "probe Rx's"),
3677 IPW2100_ORD(STAT_RX_PROBE_RESP
, "probe response Rx's"),
3678 IPW2100_ORD(STAT_RX_BEACON
, "Rx beacon"),
3679 IPW2100_ORD(STAT_RX_ATIM
, "Rx ATIM"),
3680 IPW2100_ORD(STAT_RX_DISASSN
, "disassociation Rx"),
3681 IPW2100_ORD(STAT_RX_AUTH
, "authentication Rx"),
3682 IPW2100_ORD(STAT_RX_DEAUTH
, "deauthentication Rx"),
3683 IPW2100_ORD(STAT_RX_TOTAL_BYTES
,
3684 "Total rx data bytes received"),
3685 IPW2100_ORD(STAT_RX_ERR_CRC
, "packets with Rx CRC error"),
3686 IPW2100_ORD(STAT_RX_ERR_CRC1
, "Rx CRC errors at 1MB"),
3687 IPW2100_ORD(STAT_RX_ERR_CRC2
, "Rx CRC errors at 2MB"),
3688 IPW2100_ORD(STAT_RX_ERR_CRC5_5
, "Rx CRC errors at 5.5MB"),
3689 IPW2100_ORD(STAT_RX_ERR_CRC11
, "Rx CRC errors at 11MB"),
3690 IPW2100_ORD(STAT_RX_DUPLICATE1
,
3691 "duplicate rx packets at 1MB"),
3692 IPW2100_ORD(STAT_RX_DUPLICATE2
,
3693 "duplicate rx packets at 2MB"),
3694 IPW2100_ORD(STAT_RX_DUPLICATE5_5
,
3695 "duplicate rx packets at 5.5MB"),
3696 IPW2100_ORD(STAT_RX_DUPLICATE11
,
3697 "duplicate rx packets at 11MB"),
3698 IPW2100_ORD(STAT_RX_DUPLICATE
, "duplicate rx packets"),
3699 IPW2100_ORD(PERS_DB_LOCK
, "locking fw permanent db"),
3700 IPW2100_ORD(PERS_DB_SIZE
, "size of fw permanent db"),
3701 IPW2100_ORD(PERS_DB_ADDR
, "address of fw permanent db"),
3702 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL
,
3703 "rx frames with invalid protocol"),
3704 IPW2100_ORD(SYS_BOOT_TIME
, "Boot time"),
3705 IPW2100_ORD(STAT_RX_NO_BUFFER
,
3706 "rx frames rejected due to no buffer"),
3707 IPW2100_ORD(STAT_RX_MISSING_FRAG
,
3708 "rx frames dropped due to missing fragment"),
3709 IPW2100_ORD(STAT_RX_ORPHAN_FRAG
,
3710 "rx frames dropped due to non-sequential fragment"),
3711 IPW2100_ORD(STAT_RX_ORPHAN_FRAME
,
3712 "rx frames dropped due to unmatched 1st frame"),
3713 IPW2100_ORD(STAT_RX_FRAG_AGEOUT
,
3714 "rx frames dropped due to uncompleted frame"),
3715 IPW2100_ORD(STAT_RX_ICV_ERRORS
,
3716 "ICV errors during decryption"),
3717 IPW2100_ORD(STAT_PSP_SUSPENSION
, "times adapter suspended"),
3718 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT
, "beacon timeout"),
3719 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT
,
3720 "poll response timeouts"),
3721 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT
,
3722 "timeouts waiting for last {broad,multi}cast pkt"),
3723 IPW2100_ORD(STAT_PSP_RX_DTIMS
, "PSP DTIMs received"),
3724 IPW2100_ORD(STAT_PSP_RX_TIMS
, "PSP TIMs received"),
3725 IPW2100_ORD(STAT_PSP_STATION_ID
, "PSP Station ID"),
3726 IPW2100_ORD(LAST_ASSN_TIME
, "RTC time of last association"),
3727 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS
,
3728 "current calculation of % missed beacons"),
3729 IPW2100_ORD(STAT_PERCENT_RETRIES
,
3730 "current calculation of % missed tx retries"),
3731 IPW2100_ORD(ASSOCIATED_AP_PTR
,
3732 "0 if not associated, else pointer to AP table entry"),
3733 IPW2100_ORD(AVAILABLE_AP_CNT
,
3734 "AP's decsribed in the AP table"),
3735 IPW2100_ORD(AP_LIST_PTR
, "Ptr to list of available APs"),
3736 IPW2100_ORD(STAT_AP_ASSNS
, "associations"),
3737 IPW2100_ORD(STAT_ASSN_FAIL
, "association failures"),
3738 IPW2100_ORD(STAT_ASSN_RESP_FAIL
,
3739 "failures due to response fail"),
3740 IPW2100_ORD(STAT_FULL_SCANS
, "full scans"),
3741 IPW2100_ORD(CARD_DISABLED
, "Card Disabled"),
3742 IPW2100_ORD(STAT_ROAM_INHIBIT
,
3743 "times roaming was inhibited due to activity"),
3744 IPW2100_ORD(RSSI_AT_ASSN
,
3745 "RSSI of associated AP at time of association"),
3746 IPW2100_ORD(STAT_ASSN_CAUSE1
,
3747 "reassociation: no probe response or TX on hop"),
3748 IPW2100_ORD(STAT_ASSN_CAUSE2
,
3749 "reassociation: poor tx/rx quality"),
3750 IPW2100_ORD(STAT_ASSN_CAUSE3
,
3751 "reassociation: tx/rx quality (excessive AP load"),
3752 IPW2100_ORD(STAT_ASSN_CAUSE4
,
3753 "reassociation: AP RSSI level"),
3754 IPW2100_ORD(STAT_ASSN_CAUSE5
,
3755 "reassociations due to load leveling"),
3756 IPW2100_ORD(STAT_AUTH_FAIL
, "times authentication failed"),
3757 IPW2100_ORD(STAT_AUTH_RESP_FAIL
,
3758 "times authentication response failed"),
3759 IPW2100_ORD(STATION_TABLE_CNT
,
3760 "entries in association table"),
3761 IPW2100_ORD(RSSI_AVG_CURR
, "Current avg RSSI"),
3762 IPW2100_ORD(POWER_MGMT_MODE
, "Power mode - 0=CAM, 1=PSP"),
3763 IPW2100_ORD(COUNTRY_CODE
,
3764 "IEEE country code as recv'd from beacon"),
3765 IPW2100_ORD(COUNTRY_CHANNELS
,
3766 "channels supported by country"),
3767 IPW2100_ORD(RESET_CNT
, "adapter resets (warm)"),
3768 IPW2100_ORD(BEACON_INTERVAL
, "Beacon interval"),
3769 IPW2100_ORD(ANTENNA_DIVERSITY
,
3770 "TRUE if antenna diversity is disabled"),
3771 IPW2100_ORD(DTIM_PERIOD
, "beacon intervals between DTIMs"),
3772 IPW2100_ORD(OUR_FREQ
,
3773 "current radio freq lower digits - channel ID"),
3774 IPW2100_ORD(RTC_TIME
, "current RTC time"),
3775 IPW2100_ORD(PORT_TYPE
, "operating mode"),
3776 IPW2100_ORD(CURRENT_TX_RATE
, "current tx rate"),
3777 IPW2100_ORD(SUPPORTED_RATES
, "supported tx rates"),
3778 IPW2100_ORD(ATIM_WINDOW
, "current ATIM Window"),
3779 IPW2100_ORD(BASIC_RATES
, "basic tx rates"),
3780 IPW2100_ORD(NIC_HIGHEST_RATE
, "NIC highest tx rate"),
3781 IPW2100_ORD(AP_HIGHEST_RATE
, "AP highest tx rate"),
3782 IPW2100_ORD(CAPABILITIES
,
3783 "Management frame capability field"),
3784 IPW2100_ORD(AUTH_TYPE
, "Type of authentication"),
3785 IPW2100_ORD(RADIO_TYPE
, "Adapter card platform type"),
3786 IPW2100_ORD(RTS_THRESHOLD
,
3787 "Min packet length for RTS handshaking"),
3788 IPW2100_ORD(INT_MODE
, "International mode"),
3789 IPW2100_ORD(FRAGMENTATION_THRESHOLD
,
3790 "protocol frag threshold"),
3791 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS
,
3792 "EEPROM offset in SRAM"),
3793 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE
,
3794 "EEPROM size in SRAM"),
3795 IPW2100_ORD(EEPROM_SKU_CAPABILITY
, "EEPROM SKU Capability"),
3796 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS
,
3797 "EEPROM IBSS 11b channel set"),
3798 IPW2100_ORD(MAC_VERSION
, "MAC Version"),
3799 IPW2100_ORD(MAC_REVISION
, "MAC Revision"),
3800 IPW2100_ORD(RADIO_VERSION
, "Radio Version"),
3801 IPW2100_ORD(NIC_MANF_DATE_TIME
, "MANF Date/Time STAMP"),
3802 IPW2100_ORD(UCODE_VERSION
, "Ucode Version"),};
3804 static ssize_t
show_registers(struct device
*d
, struct device_attribute
*attr
,
3808 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3809 struct net_device
*dev
= priv
->net_dev
;
3813 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "Register");
3815 for (i
= 0; i
< ARRAY_SIZE(hw_data
); i
++) {
3816 read_register(dev
, hw_data
[i
].addr
, &val
);
3817 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3818 hw_data
[i
].name
, hw_data
[i
].addr
, val
);
3824 static DEVICE_ATTR(registers
, S_IRUGO
, show_registers
, NULL
);
3826 static ssize_t
show_hardware(struct device
*d
, struct device_attribute
*attr
,
3829 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3830 struct net_device
*dev
= priv
->net_dev
;
3834 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "NIC entry");
3836 for (i
= 0; i
< ARRAY_SIZE(nic_data
); i
++) {
3841 switch (nic_data
[i
].size
) {
3843 read_nic_byte(dev
, nic_data
[i
].addr
, &tmp8
);
3844 out
+= sprintf(out
, "%30s [%08X] : %02X\n",
3845 nic_data
[i
].name
, nic_data
[i
].addr
,
3849 read_nic_word(dev
, nic_data
[i
].addr
, &tmp16
);
3850 out
+= sprintf(out
, "%30s [%08X] : %04X\n",
3851 nic_data
[i
].name
, nic_data
[i
].addr
,
3855 read_nic_dword(dev
, nic_data
[i
].addr
, &tmp32
);
3856 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3857 nic_data
[i
].name
, nic_data
[i
].addr
,
3865 static DEVICE_ATTR(hardware
, S_IRUGO
, show_hardware
, NULL
);
3867 static ssize_t
show_memory(struct device
*d
, struct device_attribute
*attr
,
3870 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3871 struct net_device
*dev
= priv
->net_dev
;
3872 static unsigned long loop
= 0;
3878 if (loop
>= 0x30000)
3881 /* sysfs provides us PAGE_SIZE buffer */
3882 while (len
< PAGE_SIZE
- 128 && loop
< 0x30000) {
3884 if (priv
->snapshot
[0])
3885 for (i
= 0; i
< 4; i
++)
3887 *(u32
*) SNAPSHOT_ADDR(loop
+ i
* 4);
3889 for (i
= 0; i
< 4; i
++)
3890 read_nic_dword(dev
, loop
+ i
* 4, &buffer
[i
]);
3893 len
+= sprintf(buf
+ len
,
3898 ((u8
*) buffer
)[0x0],
3899 ((u8
*) buffer
)[0x1],
3900 ((u8
*) buffer
)[0x2],
3901 ((u8
*) buffer
)[0x3],
3902 ((u8
*) buffer
)[0x4],
3903 ((u8
*) buffer
)[0x5],
3904 ((u8
*) buffer
)[0x6],
3905 ((u8
*) buffer
)[0x7],
3906 ((u8
*) buffer
)[0x8],
3907 ((u8
*) buffer
)[0x9],
3908 ((u8
*) buffer
)[0xa],
3909 ((u8
*) buffer
)[0xb],
3910 ((u8
*) buffer
)[0xc],
3911 ((u8
*) buffer
)[0xd],
3912 ((u8
*) buffer
)[0xe],
3913 ((u8
*) buffer
)[0xf]);
3915 len
+= sprintf(buf
+ len
, "%s\n",
3916 snprint_line(line
, sizeof(line
),
3917 (u8
*) buffer
, 16, loop
));
3924 static ssize_t
store_memory(struct device
*d
, struct device_attribute
*attr
,
3925 const char *buf
, size_t count
)
3927 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3928 struct net_device
*dev
= priv
->net_dev
;
3929 const char *p
= buf
;
3931 (void)dev
; /* kill unused-var warning for debug-only code */
3937 (count
>= 2 && tolower(p
[0]) == 'o' && tolower(p
[1]) == 'n')) {
3938 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3942 } else if (p
[0] == '0' || (count
>= 2 && tolower(p
[0]) == 'o' &&
3943 tolower(p
[1]) == 'f')) {
3944 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3948 } else if (tolower(p
[0]) == 'r') {
3949 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev
->name
);
3950 ipw2100_snapshot_free(priv
);
3953 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3954 "reset = clear memory snapshot\n", dev
->name
);
3959 static DEVICE_ATTR(memory
, S_IWUSR
| S_IRUGO
, show_memory
, store_memory
);
3961 static ssize_t
show_ordinals(struct device
*d
, struct device_attribute
*attr
,
3964 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3968 static int loop
= 0;
3970 if (priv
->status
& STATUS_RF_KILL_MASK
)
3973 if (loop
>= ARRAY_SIZE(ord_data
))
3976 /* sysfs provides us PAGE_SIZE buffer */
3977 while (len
< PAGE_SIZE
- 128 && loop
< ARRAY_SIZE(ord_data
)) {
3978 val_len
= sizeof(u32
);
3980 if (ipw2100_get_ordinal(priv
, ord_data
[loop
].index
, &val
,
3982 len
+= sprintf(buf
+ len
, "[0x%02X] = ERROR %s\n",
3983 ord_data
[loop
].index
,
3984 ord_data
[loop
].desc
);
3986 len
+= sprintf(buf
+ len
, "[0x%02X] = 0x%08X %s\n",
3987 ord_data
[loop
].index
, val
,
3988 ord_data
[loop
].desc
);
3995 static DEVICE_ATTR(ordinals
, S_IRUGO
, show_ordinals
, NULL
);
3997 static ssize_t
show_stats(struct device
*d
, struct device_attribute
*attr
,
4000 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4003 out
+= sprintf(out
, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
4004 priv
->interrupts
, priv
->tx_interrupts
,
4005 priv
->rx_interrupts
, priv
->inta_other
);
4006 out
+= sprintf(out
, "firmware resets: %d\n", priv
->resets
);
4007 out
+= sprintf(out
, "firmware hangs: %d\n", priv
->hangs
);
4008 #ifdef CONFIG_IPW2100_DEBUG
4009 out
+= sprintf(out
, "packet mismatch image: %s\n",
4010 priv
->snapshot
[0] ? "YES" : "NO");
4016 static DEVICE_ATTR(stats
, S_IRUGO
, show_stats
, NULL
);
4018 static int ipw2100_switch_mode(struct ipw2100_priv
*priv
, u32 mode
)
4022 if (mode
== priv
->ieee
->iw_mode
)
4025 err
= ipw2100_disable_adapter(priv
);
4027 printk(KERN_ERR DRV_NAME
": %s: Could not disable adapter %d\n",
4028 priv
->net_dev
->name
, err
);
4034 priv
->net_dev
->type
= ARPHRD_ETHER
;
4037 priv
->net_dev
->type
= ARPHRD_ETHER
;
4039 #ifdef CONFIG_IPW2100_MONITOR
4040 case IW_MODE_MONITOR
:
4041 priv
->last_mode
= priv
->ieee
->iw_mode
;
4042 priv
->net_dev
->type
= ARPHRD_IEEE80211_RADIOTAP
;
4044 #endif /* CONFIG_IPW2100_MONITOR */
4047 priv
->ieee
->iw_mode
= mode
;
4050 /* Indicate ipw2100_download_firmware download firmware
4051 * from disk instead of memory. */
4052 ipw2100_firmware
.version
= 0;
4055 printk(KERN_INFO
"%s: Resetting on mode change.\n", priv
->net_dev
->name
);
4056 priv
->reset_backoff
= 0;
4057 schedule_reset(priv
);
4062 static ssize_t
show_internals(struct device
*d
, struct device_attribute
*attr
,
4065 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4068 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
4070 if (priv
->status
& STATUS_ASSOCIATED
)
4071 len
+= sprintf(buf
+ len
, "connected: %lu\n",
4072 get_seconds() - priv
->connect_start
);
4074 len
+= sprintf(buf
+ len
, "not connected\n");
4076 DUMP_VAR(ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
], "p");
4077 DUMP_VAR(status
, "08lx");
4078 DUMP_VAR(config
, "08lx");
4079 DUMP_VAR(capability
, "08lx");
4082 sprintf(buf
+ len
, "last_rtc: %lu\n",
4083 (unsigned long)priv
->last_rtc
);
4085 DUMP_VAR(fatal_error
, "d");
4086 DUMP_VAR(stop_hang_check
, "d");
4087 DUMP_VAR(stop_rf_kill
, "d");
4088 DUMP_VAR(messages_sent
, "d");
4090 DUMP_VAR(tx_pend_stat
.value
, "d");
4091 DUMP_VAR(tx_pend_stat
.hi
, "d");
4093 DUMP_VAR(tx_free_stat
.value
, "d");
4094 DUMP_VAR(tx_free_stat
.lo
, "d");
4096 DUMP_VAR(msg_free_stat
.value
, "d");
4097 DUMP_VAR(msg_free_stat
.lo
, "d");
4099 DUMP_VAR(msg_pend_stat
.value
, "d");
4100 DUMP_VAR(msg_pend_stat
.hi
, "d");
4102 DUMP_VAR(fw_pend_stat
.value
, "d");
4103 DUMP_VAR(fw_pend_stat
.hi
, "d");
4105 DUMP_VAR(txq_stat
.value
, "d");
4106 DUMP_VAR(txq_stat
.lo
, "d");
4108 DUMP_VAR(ieee
->scans
, "d");
4109 DUMP_VAR(reset_backoff
, "d");
4114 static DEVICE_ATTR(internals
, S_IRUGO
, show_internals
, NULL
);
4116 static ssize_t
show_bssinfo(struct device
*d
, struct device_attribute
*attr
,
4119 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4120 char essid
[IW_ESSID_MAX_SIZE
+ 1];
4124 unsigned int length
;
4127 if (priv
->status
& STATUS_RF_KILL_MASK
)
4130 memset(essid
, 0, sizeof(essid
));
4131 memset(bssid
, 0, sizeof(bssid
));
4133 length
= IW_ESSID_MAX_SIZE
;
4134 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
, essid
, &length
);
4136 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4139 length
= sizeof(bssid
);
4140 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
4143 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4146 length
= sizeof(u32
);
4147 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &length
);
4149 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4152 out
+= sprintf(out
, "ESSID: %s\n", essid
);
4153 out
+= sprintf(out
, "BSSID: %pM\n", bssid
);
4154 out
+= sprintf(out
, "Channel: %d\n", chan
);
4159 static DEVICE_ATTR(bssinfo
, S_IRUGO
, show_bssinfo
, NULL
);
4161 #ifdef CONFIG_IPW2100_DEBUG
4162 static ssize_t
show_debug_level(struct device_driver
*d
, char *buf
)
4164 return sprintf(buf
, "0x%08X\n", ipw2100_debug_level
);
4167 static ssize_t
store_debug_level(struct device_driver
*d
,
4168 const char *buf
, size_t count
)
4173 ret
= kstrtou32(buf
, 0, &val
);
4175 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf
);
4177 ipw2100_debug_level
= val
;
4179 return strnlen(buf
, count
);
4182 static DRIVER_ATTR(debug_level
, S_IWUSR
| S_IRUGO
, show_debug_level
,
4184 #endif /* CONFIG_IPW2100_DEBUG */
4186 static ssize_t
show_fatal_error(struct device
*d
,
4187 struct device_attribute
*attr
, char *buf
)
4189 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4193 if (priv
->fatal_error
)
4194 out
+= sprintf(out
, "0x%08X\n", priv
->fatal_error
);
4196 out
+= sprintf(out
, "0\n");
4198 for (i
= 1; i
<= IPW2100_ERROR_QUEUE
; i
++) {
4199 if (!priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4200 IPW2100_ERROR_QUEUE
])
4203 out
+= sprintf(out
, "%d. 0x%08X\n", i
,
4204 priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4205 IPW2100_ERROR_QUEUE
]);
4211 static ssize_t
store_fatal_error(struct device
*d
,
4212 struct device_attribute
*attr
, const char *buf
,
4215 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4216 schedule_reset(priv
);
4220 static DEVICE_ATTR(fatal_error
, S_IWUSR
| S_IRUGO
, show_fatal_error
,
4223 static ssize_t
show_scan_age(struct device
*d
, struct device_attribute
*attr
,
4226 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4227 return sprintf(buf
, "%d\n", priv
->ieee
->scan_age
);
4230 static ssize_t
store_scan_age(struct device
*d
, struct device_attribute
*attr
,
4231 const char *buf
, size_t count
)
4233 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4234 struct net_device
*dev
= priv
->net_dev
;
4238 (void)dev
; /* kill unused-var warning for debug-only code */
4240 IPW_DEBUG_INFO("enter\n");
4242 ret
= kstrtoul(buf
, 0, &val
);
4244 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev
->name
);
4246 priv
->ieee
->scan_age
= val
;
4247 IPW_DEBUG_INFO("set scan_age = %u\n", priv
->ieee
->scan_age
);
4250 IPW_DEBUG_INFO("exit\n");
4251 return strnlen(buf
, count
);
4254 static DEVICE_ATTR(scan_age
, S_IWUSR
| S_IRUGO
, show_scan_age
, store_scan_age
);
4256 static ssize_t
show_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4259 /* 0 - RF kill not enabled
4260 1 - SW based RF kill active (sysfs)
4261 2 - HW based RF kill active
4262 3 - Both HW and SW baed RF kill active */
4263 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4264 int val
= ((priv
->status
& STATUS_RF_KILL_SW
) ? 0x1 : 0x0) |
4265 (rf_kill_active(priv
) ? 0x2 : 0x0);
4266 return sprintf(buf
, "%i\n", val
);
4269 static int ipw_radio_kill_sw(struct ipw2100_priv
*priv
, int disable_radio
)
4271 if ((disable_radio
? 1 : 0) ==
4272 (priv
->status
& STATUS_RF_KILL_SW
? 1 : 0))
4275 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4276 disable_radio
? "OFF" : "ON");
4278 mutex_lock(&priv
->action_mutex
);
4280 if (disable_radio
) {
4281 priv
->status
|= STATUS_RF_KILL_SW
;
4284 priv
->status
&= ~STATUS_RF_KILL_SW
;
4285 if (rf_kill_active(priv
)) {
4286 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4287 "disabled by HW switch\n");
4288 /* Make sure the RF_KILL check timer is running */
4289 priv
->stop_rf_kill
= 0;
4290 mod_delayed_work(system_wq
, &priv
->rf_kill
,
4291 round_jiffies_relative(HZ
));
4293 schedule_reset(priv
);
4296 mutex_unlock(&priv
->action_mutex
);
4300 static ssize_t
store_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4301 const char *buf
, size_t count
)
4303 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4304 ipw_radio_kill_sw(priv
, buf
[0] == '1');
4308 static DEVICE_ATTR(rf_kill
, S_IWUSR
| S_IRUGO
, show_rf_kill
, store_rf_kill
);
4310 static struct attribute
*ipw2100_sysfs_entries
[] = {
4311 &dev_attr_hardware
.attr
,
4312 &dev_attr_registers
.attr
,
4313 &dev_attr_ordinals
.attr
,
4315 &dev_attr_stats
.attr
,
4316 &dev_attr_internals
.attr
,
4317 &dev_attr_bssinfo
.attr
,
4318 &dev_attr_memory
.attr
,
4319 &dev_attr_scan_age
.attr
,
4320 &dev_attr_fatal_error
.attr
,
4321 &dev_attr_rf_kill
.attr
,
4323 &dev_attr_status
.attr
,
4324 &dev_attr_capability
.attr
,
4328 static struct attribute_group ipw2100_attribute_group
= {
4329 .attrs
= ipw2100_sysfs_entries
,
4332 static int status_queue_allocate(struct ipw2100_priv
*priv
, int entries
)
4334 struct ipw2100_status_queue
*q
= &priv
->status_queue
;
4336 IPW_DEBUG_INFO("enter\n");
4338 q
->size
= entries
* sizeof(struct ipw2100_status
);
4340 (struct ipw2100_status
*)pci_alloc_consistent(priv
->pci_dev
,
4343 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4347 memset(q
->drv
, 0, q
->size
);
4349 IPW_DEBUG_INFO("exit\n");
4354 static void status_queue_free(struct ipw2100_priv
*priv
)
4356 IPW_DEBUG_INFO("enter\n");
4358 if (priv
->status_queue
.drv
) {
4359 pci_free_consistent(priv
->pci_dev
, priv
->status_queue
.size
,
4360 priv
->status_queue
.drv
,
4361 priv
->status_queue
.nic
);
4362 priv
->status_queue
.drv
= NULL
;
4365 IPW_DEBUG_INFO("exit\n");
4368 static int bd_queue_allocate(struct ipw2100_priv
*priv
,
4369 struct ipw2100_bd_queue
*q
, int entries
)
4371 IPW_DEBUG_INFO("enter\n");
4373 memset(q
, 0, sizeof(struct ipw2100_bd_queue
));
4375 q
->entries
= entries
;
4376 q
->size
= entries
* sizeof(struct ipw2100_bd
);
4377 q
->drv
= pci_alloc_consistent(priv
->pci_dev
, q
->size
, &q
->nic
);
4380 ("can't allocate shared memory for buffer descriptors\n");
4383 memset(q
->drv
, 0, q
->size
);
4385 IPW_DEBUG_INFO("exit\n");
4390 static void bd_queue_free(struct ipw2100_priv
*priv
, struct ipw2100_bd_queue
*q
)
4392 IPW_DEBUG_INFO("enter\n");
4398 pci_free_consistent(priv
->pci_dev
, q
->size
, q
->drv
, q
->nic
);
4402 IPW_DEBUG_INFO("exit\n");
4405 static void bd_queue_initialize(struct ipw2100_priv
*priv
,
4406 struct ipw2100_bd_queue
*q
, u32 base
, u32 size
,
4409 IPW_DEBUG_INFO("enter\n");
4411 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q
->drv
,
4414 write_register(priv
->net_dev
, base
, q
->nic
);
4415 write_register(priv
->net_dev
, size
, q
->entries
);
4416 write_register(priv
->net_dev
, r
, q
->oldest
);
4417 write_register(priv
->net_dev
, w
, q
->next
);
4419 IPW_DEBUG_INFO("exit\n");
4422 static void ipw2100_kill_works(struct ipw2100_priv
*priv
)
4424 priv
->stop_rf_kill
= 1;
4425 priv
->stop_hang_check
= 1;
4426 cancel_delayed_work_sync(&priv
->reset_work
);
4427 cancel_delayed_work_sync(&priv
->security_work
);
4428 cancel_delayed_work_sync(&priv
->wx_event_work
);
4429 cancel_delayed_work_sync(&priv
->hang_check
);
4430 cancel_delayed_work_sync(&priv
->rf_kill
);
4431 cancel_delayed_work_sync(&priv
->scan_event
);
4434 static int ipw2100_tx_allocate(struct ipw2100_priv
*priv
)
4436 int i
, j
, err
= -EINVAL
;
4440 IPW_DEBUG_INFO("enter\n");
4442 err
= bd_queue_allocate(priv
, &priv
->tx_queue
, TX_QUEUE_LENGTH
);
4444 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4445 priv
->net_dev
->name
);
4449 priv
->tx_buffers
= kmalloc_array(TX_PENDED_QUEUE_LENGTH
,
4450 sizeof(struct ipw2100_tx_packet
),
4452 if (!priv
->tx_buffers
) {
4453 bd_queue_free(priv
, &priv
->tx_queue
);
4457 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4458 v
= pci_alloc_consistent(priv
->pci_dev
,
4459 sizeof(struct ipw2100_data_header
),
4462 printk(KERN_ERR DRV_NAME
4463 ": %s: PCI alloc failed for tx " "buffers.\n",
4464 priv
->net_dev
->name
);
4469 priv
->tx_buffers
[i
].type
= DATA
;
4470 priv
->tx_buffers
[i
].info
.d_struct
.data
=
4471 (struct ipw2100_data_header
*)v
;
4472 priv
->tx_buffers
[i
].info
.d_struct
.data_phys
= p
;
4473 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4476 if (i
== TX_PENDED_QUEUE_LENGTH
)
4479 for (j
= 0; j
< i
; j
++) {
4480 pci_free_consistent(priv
->pci_dev
,
4481 sizeof(struct ipw2100_data_header
),
4482 priv
->tx_buffers
[j
].info
.d_struct
.data
,
4483 priv
->tx_buffers
[j
].info
.d_struct
.
4487 kfree(priv
->tx_buffers
);
4488 priv
->tx_buffers
= NULL
;
4493 static void ipw2100_tx_initialize(struct ipw2100_priv
*priv
)
4497 IPW_DEBUG_INFO("enter\n");
4500 * reinitialize packet info lists
4502 INIT_LIST_HEAD(&priv
->fw_pend_list
);
4503 INIT_STAT(&priv
->fw_pend_stat
);
4506 * reinitialize lists
4508 INIT_LIST_HEAD(&priv
->tx_pend_list
);
4509 INIT_LIST_HEAD(&priv
->tx_free_list
);
4510 INIT_STAT(&priv
->tx_pend_stat
);
4511 INIT_STAT(&priv
->tx_free_stat
);
4513 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4514 /* We simply drop any SKBs that have been queued for
4516 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4517 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4519 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4522 list_add_tail(&priv
->tx_buffers
[i
].list
, &priv
->tx_free_list
);
4525 SET_STAT(&priv
->tx_free_stat
, i
);
4527 priv
->tx_queue
.oldest
= 0;
4528 priv
->tx_queue
.available
= priv
->tx_queue
.entries
;
4529 priv
->tx_queue
.next
= 0;
4530 INIT_STAT(&priv
->txq_stat
);
4531 SET_STAT(&priv
->txq_stat
, priv
->tx_queue
.available
);
4533 bd_queue_initialize(priv
, &priv
->tx_queue
,
4534 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE
,
4535 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE
,
4536 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
4537 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
);
4539 IPW_DEBUG_INFO("exit\n");
4543 static void ipw2100_tx_free(struct ipw2100_priv
*priv
)
4547 IPW_DEBUG_INFO("enter\n");
4549 bd_queue_free(priv
, &priv
->tx_queue
);
4551 if (!priv
->tx_buffers
)
4554 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4555 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4556 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4558 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4560 if (priv
->tx_buffers
[i
].info
.d_struct
.data
)
4561 pci_free_consistent(priv
->pci_dev
,
4562 sizeof(struct ipw2100_data_header
),
4563 priv
->tx_buffers
[i
].info
.d_struct
.
4565 priv
->tx_buffers
[i
].info
.d_struct
.
4569 kfree(priv
->tx_buffers
);
4570 priv
->tx_buffers
= NULL
;
4572 IPW_DEBUG_INFO("exit\n");
4575 static int ipw2100_rx_allocate(struct ipw2100_priv
*priv
)
4577 int i
, j
, err
= -EINVAL
;
4579 IPW_DEBUG_INFO("enter\n");
4581 err
= bd_queue_allocate(priv
, &priv
->rx_queue
, RX_QUEUE_LENGTH
);
4583 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4587 err
= status_queue_allocate(priv
, RX_QUEUE_LENGTH
);
4589 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4590 bd_queue_free(priv
, &priv
->rx_queue
);
4597 priv
->rx_buffers
= kmalloc(RX_QUEUE_LENGTH
*
4598 sizeof(struct ipw2100_rx_packet
),
4600 if (!priv
->rx_buffers
) {
4601 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4603 bd_queue_free(priv
, &priv
->rx_queue
);
4605 status_queue_free(priv
);
4610 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4611 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
4613 err
= ipw2100_alloc_skb(priv
, packet
);
4614 if (unlikely(err
)) {
4619 /* The BD holds the cache aligned address */
4620 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
4621 priv
->rx_queue
.drv
[i
].buf_length
= IPW_RX_NIC_BUFFER_LENGTH
;
4622 priv
->status_queue
.drv
[i
].status_fields
= 0;
4625 if (i
== RX_QUEUE_LENGTH
)
4628 for (j
= 0; j
< i
; j
++) {
4629 pci_unmap_single(priv
->pci_dev
, priv
->rx_buffers
[j
].dma_addr
,
4630 sizeof(struct ipw2100_rx_packet
),
4631 PCI_DMA_FROMDEVICE
);
4632 dev_kfree_skb(priv
->rx_buffers
[j
].skb
);
4635 kfree(priv
->rx_buffers
);
4636 priv
->rx_buffers
= NULL
;
4638 bd_queue_free(priv
, &priv
->rx_queue
);
4640 status_queue_free(priv
);
4645 static void ipw2100_rx_initialize(struct ipw2100_priv
*priv
)
4647 IPW_DEBUG_INFO("enter\n");
4649 priv
->rx_queue
.oldest
= 0;
4650 priv
->rx_queue
.available
= priv
->rx_queue
.entries
- 1;
4651 priv
->rx_queue
.next
= priv
->rx_queue
.entries
- 1;
4653 INIT_STAT(&priv
->rxq_stat
);
4654 SET_STAT(&priv
->rxq_stat
, priv
->rx_queue
.available
);
4656 bd_queue_initialize(priv
, &priv
->rx_queue
,
4657 IPW_MEM_HOST_SHARED_RX_BD_BASE
,
4658 IPW_MEM_HOST_SHARED_RX_BD_SIZE
,
4659 IPW_MEM_HOST_SHARED_RX_READ_INDEX
,
4660 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
);
4662 /* set up the status queue */
4663 write_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_STATUS_BASE
,
4664 priv
->status_queue
.nic
);
4666 IPW_DEBUG_INFO("exit\n");
4669 static void ipw2100_rx_free(struct ipw2100_priv
*priv
)
4673 IPW_DEBUG_INFO("enter\n");
4675 bd_queue_free(priv
, &priv
->rx_queue
);
4676 status_queue_free(priv
);
4678 if (!priv
->rx_buffers
)
4681 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4682 if (priv
->rx_buffers
[i
].rxp
) {
4683 pci_unmap_single(priv
->pci_dev
,
4684 priv
->rx_buffers
[i
].dma_addr
,
4685 sizeof(struct ipw2100_rx
),
4686 PCI_DMA_FROMDEVICE
);
4687 dev_kfree_skb(priv
->rx_buffers
[i
].skb
);
4691 kfree(priv
->rx_buffers
);
4692 priv
->rx_buffers
= NULL
;
4694 IPW_DEBUG_INFO("exit\n");
4697 static int ipw2100_read_mac_address(struct ipw2100_priv
*priv
)
4699 u32 length
= ETH_ALEN
;
4704 err
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ADAPTER_MAC
, addr
, &length
);
4706 IPW_DEBUG_INFO("MAC address read failed\n");
4710 memcpy(priv
->net_dev
->dev_addr
, addr
, ETH_ALEN
);
4711 IPW_DEBUG_INFO("card MAC is %pM\n", priv
->net_dev
->dev_addr
);
4716 /********************************************************************
4720 ********************************************************************/
4722 static int ipw2100_set_mac_address(struct ipw2100_priv
*priv
, int batch_mode
)
4724 struct host_command cmd
= {
4725 .host_command
= ADAPTER_ADDRESS
,
4726 .host_command_sequence
= 0,
4727 .host_command_length
= ETH_ALEN
4731 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4733 IPW_DEBUG_INFO("enter\n");
4735 if (priv
->config
& CFG_CUSTOM_MAC
) {
4736 memcpy(cmd
.host_command_parameters
, priv
->mac_addr
, ETH_ALEN
);
4737 memcpy(priv
->net_dev
->dev_addr
, priv
->mac_addr
, ETH_ALEN
);
4739 memcpy(cmd
.host_command_parameters
, priv
->net_dev
->dev_addr
,
4742 err
= ipw2100_hw_send_command(priv
, &cmd
);
4744 IPW_DEBUG_INFO("exit\n");
4748 static int ipw2100_set_port_type(struct ipw2100_priv
*priv
, u32 port_type
,
4751 struct host_command cmd
= {
4752 .host_command
= PORT_TYPE
,
4753 .host_command_sequence
= 0,
4754 .host_command_length
= sizeof(u32
)
4758 switch (port_type
) {
4760 cmd
.host_command_parameters
[0] = IPW_BSS
;
4763 cmd
.host_command_parameters
[0] = IPW_IBSS
;
4767 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4768 port_type
== IPW_IBSS
? "Ad-Hoc" : "Managed");
4771 err
= ipw2100_disable_adapter(priv
);
4773 printk(KERN_ERR DRV_NAME
4774 ": %s: Could not disable adapter %d\n",
4775 priv
->net_dev
->name
, err
);
4780 /* send cmd to firmware */
4781 err
= ipw2100_hw_send_command(priv
, &cmd
);
4784 ipw2100_enable_adapter(priv
);
4789 static int ipw2100_set_channel(struct ipw2100_priv
*priv
, u32 channel
,
4792 struct host_command cmd
= {
4793 .host_command
= CHANNEL
,
4794 .host_command_sequence
= 0,
4795 .host_command_length
= sizeof(u32
)
4799 cmd
.host_command_parameters
[0] = channel
;
4801 IPW_DEBUG_HC("CHANNEL: %d\n", channel
);
4803 /* If BSS then we don't support channel selection */
4804 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
4807 if ((channel
!= 0) &&
4808 ((channel
< REG_MIN_CHANNEL
) || (channel
> REG_MAX_CHANNEL
)))
4812 err
= ipw2100_disable_adapter(priv
);
4817 err
= ipw2100_hw_send_command(priv
, &cmd
);
4819 IPW_DEBUG_INFO("Failed to set channel to %d", channel
);
4824 priv
->config
|= CFG_STATIC_CHANNEL
;
4826 priv
->config
&= ~CFG_STATIC_CHANNEL
;
4828 priv
->channel
= channel
;
4831 err
= ipw2100_enable_adapter(priv
);
4839 static int ipw2100_system_config(struct ipw2100_priv
*priv
, int batch_mode
)
4841 struct host_command cmd
= {
4842 .host_command
= SYSTEM_CONFIG
,
4843 .host_command_sequence
= 0,
4844 .host_command_length
= 12,
4846 u32 ibss_mask
, len
= sizeof(u32
);
4849 /* Set system configuration */
4852 err
= ipw2100_disable_adapter(priv
);
4857 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
4858 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_AUTO_START
;
4860 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_MASK
|
4861 IPW_CFG_BSS_MASK
| IPW_CFG_802_1x_ENABLE
;
4863 if (!(priv
->config
& CFG_LONG_PREAMBLE
))
4864 cmd
.host_command_parameters
[0] |= IPW_CFG_PREAMBLE_AUTO
;
4866 err
= ipw2100_get_ordinal(priv
,
4867 IPW_ORD_EEPROM_IBSS_11B_CHANNELS
,
4870 ibss_mask
= IPW_IBSS_11B_DEFAULT_MASK
;
4872 cmd
.host_command_parameters
[1] = REG_CHANNEL_MASK
;
4873 cmd
.host_command_parameters
[2] = REG_CHANNEL_MASK
& ibss_mask
;
4876 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4878 err
= ipw2100_hw_send_command(priv
, &cmd
);
4882 /* If IPv6 is configured in the kernel then we don't want to filter out all
4883 * of the multicast packets as IPv6 needs some. */
4884 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4885 cmd
.host_command
= ADD_MULTICAST
;
4886 cmd
.host_command_sequence
= 0;
4887 cmd
.host_command_length
= 0;
4889 ipw2100_hw_send_command(priv
, &cmd
);
4892 err
= ipw2100_enable_adapter(priv
);
4900 static int ipw2100_set_tx_rates(struct ipw2100_priv
*priv
, u32 rate
,
4903 struct host_command cmd
= {
4904 .host_command
= BASIC_TX_RATES
,
4905 .host_command_sequence
= 0,
4906 .host_command_length
= 4
4910 cmd
.host_command_parameters
[0] = rate
& TX_RATE_MASK
;
4913 err
= ipw2100_disable_adapter(priv
);
4918 /* Set BASIC TX Rate first */
4919 ipw2100_hw_send_command(priv
, &cmd
);
4922 cmd
.host_command
= TX_RATES
;
4923 ipw2100_hw_send_command(priv
, &cmd
);
4925 /* Set MSDU TX Rate */
4926 cmd
.host_command
= MSDU_TX_RATES
;
4927 ipw2100_hw_send_command(priv
, &cmd
);
4930 err
= ipw2100_enable_adapter(priv
);
4935 priv
->tx_rates
= rate
;
4940 static int ipw2100_set_power_mode(struct ipw2100_priv
*priv
, int power_level
)
4942 struct host_command cmd
= {
4943 .host_command
= POWER_MODE
,
4944 .host_command_sequence
= 0,
4945 .host_command_length
= 4
4949 cmd
.host_command_parameters
[0] = power_level
;
4951 err
= ipw2100_hw_send_command(priv
, &cmd
);
4955 if (power_level
== IPW_POWER_MODE_CAM
)
4956 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
4958 priv
->power_mode
= IPW_POWER_ENABLED
| power_level
;
4960 #ifdef IPW2100_TX_POWER
4961 if (priv
->port_type
== IBSS
&& priv
->adhoc_power
!= DFTL_IBSS_TX_POWER
) {
4962 /* Set beacon interval */
4963 cmd
.host_command
= TX_POWER_INDEX
;
4964 cmd
.host_command_parameters
[0] = (u32
) priv
->adhoc_power
;
4966 err
= ipw2100_hw_send_command(priv
, &cmd
);
4975 static int ipw2100_set_rts_threshold(struct ipw2100_priv
*priv
, u32 threshold
)
4977 struct host_command cmd
= {
4978 .host_command
= RTS_THRESHOLD
,
4979 .host_command_sequence
= 0,
4980 .host_command_length
= 4
4984 if (threshold
& RTS_DISABLED
)
4985 cmd
.host_command_parameters
[0] = MAX_RTS_THRESHOLD
;
4987 cmd
.host_command_parameters
[0] = threshold
& ~RTS_DISABLED
;
4989 err
= ipw2100_hw_send_command(priv
, &cmd
);
4993 priv
->rts_threshold
= threshold
;
4999 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv
*priv
,
5000 u32 threshold
, int batch_mode
)
5002 struct host_command cmd
= {
5003 .host_command
= FRAG_THRESHOLD
,
5004 .host_command_sequence
= 0,
5005 .host_command_length
= 4,
5006 .host_command_parameters
[0] = 0,
5011 err
= ipw2100_disable_adapter(priv
);
5017 threshold
= DEFAULT_FRAG_THRESHOLD
;
5019 threshold
= max(threshold
, MIN_FRAG_THRESHOLD
);
5020 threshold
= min(threshold
, MAX_FRAG_THRESHOLD
);
5023 cmd
.host_command_parameters
[0] = threshold
;
5025 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold
);
5027 err
= ipw2100_hw_send_command(priv
, &cmd
);
5030 ipw2100_enable_adapter(priv
);
5033 priv
->frag_threshold
= threshold
;
5039 static int ipw2100_set_short_retry(struct ipw2100_priv
*priv
, u32 retry
)
5041 struct host_command cmd
= {
5042 .host_command
= SHORT_RETRY_LIMIT
,
5043 .host_command_sequence
= 0,
5044 .host_command_length
= 4
5048 cmd
.host_command_parameters
[0] = retry
;
5050 err
= ipw2100_hw_send_command(priv
, &cmd
);
5054 priv
->short_retry_limit
= retry
;
5059 static int ipw2100_set_long_retry(struct ipw2100_priv
*priv
, u32 retry
)
5061 struct host_command cmd
= {
5062 .host_command
= LONG_RETRY_LIMIT
,
5063 .host_command_sequence
= 0,
5064 .host_command_length
= 4
5068 cmd
.host_command_parameters
[0] = retry
;
5070 err
= ipw2100_hw_send_command(priv
, &cmd
);
5074 priv
->long_retry_limit
= retry
;
5079 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv
*priv
, u8
* bssid
,
5082 struct host_command cmd
= {
5083 .host_command
= MANDATORY_BSSID
,
5084 .host_command_sequence
= 0,
5085 .host_command_length
= (bssid
== NULL
) ? 0 : ETH_ALEN
5089 #ifdef CONFIG_IPW2100_DEBUG
5091 IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid
);
5093 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5095 /* if BSSID is empty then we disable mandatory bssid mode */
5097 memcpy(cmd
.host_command_parameters
, bssid
, ETH_ALEN
);
5100 err
= ipw2100_disable_adapter(priv
);
5105 err
= ipw2100_hw_send_command(priv
, &cmd
);
5108 ipw2100_enable_adapter(priv
);
5113 static int ipw2100_disassociate_bssid(struct ipw2100_priv
*priv
)
5115 struct host_command cmd
= {
5116 .host_command
= DISASSOCIATION_BSSID
,
5117 .host_command_sequence
= 0,
5118 .host_command_length
= ETH_ALEN
5123 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5126 /* The Firmware currently ignores the BSSID and just disassociates from
5127 * the currently associated AP -- but in the off chance that a future
5128 * firmware does use the BSSID provided here, we go ahead and try and
5129 * set it to the currently associated AP's BSSID */
5130 memcpy(cmd
.host_command_parameters
, priv
->bssid
, ETH_ALEN
);
5132 err
= ipw2100_hw_send_command(priv
, &cmd
);
5137 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*,
5138 struct ipw2100_wpa_assoc_frame
*, int)
5139 __attribute__ ((unused
));
5141 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*priv
,
5142 struct ipw2100_wpa_assoc_frame
*wpa_frame
,
5145 struct host_command cmd
= {
5146 .host_command
= SET_WPA_IE
,
5147 .host_command_sequence
= 0,
5148 .host_command_length
= sizeof(struct ipw2100_wpa_assoc_frame
),
5152 IPW_DEBUG_HC("SET_WPA_IE\n");
5155 err
= ipw2100_disable_adapter(priv
);
5160 memcpy(cmd
.host_command_parameters
, wpa_frame
,
5161 sizeof(struct ipw2100_wpa_assoc_frame
));
5163 err
= ipw2100_hw_send_command(priv
, &cmd
);
5166 if (ipw2100_enable_adapter(priv
))
5173 struct security_info_params
{
5174 u32 allowed_ciphers
;
5177 u8 replay_counters_number
;
5178 u8 unicast_using_group
;
5181 static int ipw2100_set_security_information(struct ipw2100_priv
*priv
,
5184 int unicast_using_group
,
5187 struct host_command cmd
= {
5188 .host_command
= SET_SECURITY_INFORMATION
,
5189 .host_command_sequence
= 0,
5190 .host_command_length
= sizeof(struct security_info_params
)
5192 struct security_info_params
*security
=
5193 (struct security_info_params
*)&cmd
.host_command_parameters
;
5195 memset(security
, 0, sizeof(*security
));
5197 /* If shared key AP authentication is turned on, then we need to
5198 * configure the firmware to try and use it.
5200 * Actual data encryption/decryption is handled by the host. */
5201 security
->auth_mode
= auth_mode
;
5202 security
->unicast_using_group
= unicast_using_group
;
5204 switch (security_level
) {
5207 security
->allowed_ciphers
= IPW_NONE_CIPHER
;
5210 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5214 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5215 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
;
5217 case SEC_LEVEL_2_CKIP
:
5218 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5219 IPW_WEP104_CIPHER
| IPW_CKIP_CIPHER
;
5222 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5223 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
| IPW_CCMP_CIPHER
;
5228 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5229 security
->auth_mode
, security
->allowed_ciphers
, security_level
);
5231 security
->replay_counters_number
= 0;
5234 err
= ipw2100_disable_adapter(priv
);
5239 err
= ipw2100_hw_send_command(priv
, &cmd
);
5242 ipw2100_enable_adapter(priv
);
5247 static int ipw2100_set_tx_power(struct ipw2100_priv
*priv
, u32 tx_power
)
5249 struct host_command cmd
= {
5250 .host_command
= TX_POWER_INDEX
,
5251 .host_command_sequence
= 0,
5252 .host_command_length
= 4
5257 if (tx_power
!= IPW_TX_POWER_DEFAULT
)
5258 tmp
= (tx_power
- IPW_TX_POWER_MIN_DBM
) * 16 /
5259 (IPW_TX_POWER_MAX_DBM
- IPW_TX_POWER_MIN_DBM
);
5261 cmd
.host_command_parameters
[0] = tmp
;
5263 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
5264 err
= ipw2100_hw_send_command(priv
, &cmd
);
5266 priv
->tx_power
= tx_power
;
5271 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv
*priv
,
5272 u32 interval
, int batch_mode
)
5274 struct host_command cmd
= {
5275 .host_command
= BEACON_INTERVAL
,
5276 .host_command_sequence
= 0,
5277 .host_command_length
= 4
5281 cmd
.host_command_parameters
[0] = interval
;
5283 IPW_DEBUG_INFO("enter\n");
5285 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5287 err
= ipw2100_disable_adapter(priv
);
5292 ipw2100_hw_send_command(priv
, &cmd
);
5295 err
= ipw2100_enable_adapter(priv
);
5301 IPW_DEBUG_INFO("exit\n");
5306 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
)
5308 ipw2100_tx_initialize(priv
);
5309 ipw2100_rx_initialize(priv
);
5310 ipw2100_msg_initialize(priv
);
5313 static void ipw2100_queues_free(struct ipw2100_priv
*priv
)
5315 ipw2100_tx_free(priv
);
5316 ipw2100_rx_free(priv
);
5317 ipw2100_msg_free(priv
);
5320 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
)
5322 if (ipw2100_tx_allocate(priv
) ||
5323 ipw2100_rx_allocate(priv
) || ipw2100_msg_allocate(priv
))
5329 ipw2100_tx_free(priv
);
5330 ipw2100_rx_free(priv
);
5331 ipw2100_msg_free(priv
);
5335 #define IPW_PRIVACY_CAPABLE 0x0008
5337 static int ipw2100_set_wep_flags(struct ipw2100_priv
*priv
, u32 flags
,
5340 struct host_command cmd
= {
5341 .host_command
= WEP_FLAGS
,
5342 .host_command_sequence
= 0,
5343 .host_command_length
= 4
5347 cmd
.host_command_parameters
[0] = flags
;
5349 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags
);
5352 err
= ipw2100_disable_adapter(priv
);
5354 printk(KERN_ERR DRV_NAME
5355 ": %s: Could not disable adapter %d\n",
5356 priv
->net_dev
->name
, err
);
5361 /* send cmd to firmware */
5362 err
= ipw2100_hw_send_command(priv
, &cmd
);
5365 ipw2100_enable_adapter(priv
);
5370 struct ipw2100_wep_key
{
5376 /* Macros to ease up priting WEP keys */
5377 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5378 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5379 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5380 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5385 * @priv: struct to work on
5386 * @idx: index of the key we want to set
5387 * @key: ptr to the key data to set
5388 * @len: length of the buffer at @key
5389 * @batch_mode: FIXME perform the operation in batch mode, not
5390 * disabling the device.
5392 * @returns 0 if OK, < 0 errno code on error.
5394 * Fill out a command structure with the new wep key, length an
5395 * index and send it down the wire.
5397 static int ipw2100_set_key(struct ipw2100_priv
*priv
,
5398 int idx
, char *key
, int len
, int batch_mode
)
5400 int keylen
= len
? (len
<= 5 ? 5 : 13) : 0;
5401 struct host_command cmd
= {
5402 .host_command
= WEP_KEY_INFO
,
5403 .host_command_sequence
= 0,
5404 .host_command_length
= sizeof(struct ipw2100_wep_key
),
5406 struct ipw2100_wep_key
*wep_key
= (void *)cmd
.host_command_parameters
;
5409 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5412 /* NOTE: We don't check cached values in case the firmware was reset
5413 * or some other problem is occurring. If the user is setting the key,
5414 * then we push the change */
5417 wep_key
->len
= keylen
;
5420 memcpy(wep_key
->key
, key
, len
);
5421 memset(wep_key
->key
+ len
, 0, keylen
- len
);
5424 /* Will be optimized out on debug not being configured in */
5426 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5427 priv
->net_dev
->name
, wep_key
->idx
);
5428 else if (keylen
== 5)
5429 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64
"\n",
5430 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5431 WEP_STR_64(wep_key
->key
));
5433 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5435 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5436 WEP_STR_128(wep_key
->key
));
5439 err
= ipw2100_disable_adapter(priv
);
5440 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5442 printk(KERN_ERR DRV_NAME
5443 ": %s: Could not disable adapter %d\n",
5444 priv
->net_dev
->name
, err
);
5449 /* send cmd to firmware */
5450 err
= ipw2100_hw_send_command(priv
, &cmd
);
5453 int err2
= ipw2100_enable_adapter(priv
);
5460 static int ipw2100_set_key_index(struct ipw2100_priv
*priv
,
5461 int idx
, int batch_mode
)
5463 struct host_command cmd
= {
5464 .host_command
= WEP_KEY_INDEX
,
5465 .host_command_sequence
= 0,
5466 .host_command_length
= 4,
5467 .host_command_parameters
= {idx
},
5471 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx
);
5473 if (idx
< 0 || idx
> 3)
5477 err
= ipw2100_disable_adapter(priv
);
5479 printk(KERN_ERR DRV_NAME
5480 ": %s: Could not disable adapter %d\n",
5481 priv
->net_dev
->name
, err
);
5486 /* send cmd to firmware */
5487 err
= ipw2100_hw_send_command(priv
, &cmd
);
5490 ipw2100_enable_adapter(priv
);
5495 static int ipw2100_configure_security(struct ipw2100_priv
*priv
, int batch_mode
)
5497 int i
, err
, auth_mode
, sec_level
, use_group
;
5499 if (!(priv
->status
& STATUS_RUNNING
))
5503 err
= ipw2100_disable_adapter(priv
);
5508 if (!priv
->ieee
->sec
.enabled
) {
5510 ipw2100_set_security_information(priv
, IPW_AUTH_OPEN
,
5513 auth_mode
= IPW_AUTH_OPEN
;
5514 if (priv
->ieee
->sec
.flags
& SEC_AUTH_MODE
) {
5515 if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_SHARED_KEY
)
5516 auth_mode
= IPW_AUTH_SHARED
;
5517 else if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_LEAP
)
5518 auth_mode
= IPW_AUTH_LEAP_CISCO_ID
;
5521 sec_level
= SEC_LEVEL_0
;
5522 if (priv
->ieee
->sec
.flags
& SEC_LEVEL
)
5523 sec_level
= priv
->ieee
->sec
.level
;
5526 if (priv
->ieee
->sec
.flags
& SEC_UNICAST_GROUP
)
5527 use_group
= priv
->ieee
->sec
.unicast_uses_group
;
5530 ipw2100_set_security_information(priv
, auth_mode
, sec_level
,
5537 if (priv
->ieee
->sec
.enabled
) {
5538 for (i
= 0; i
< 4; i
++) {
5539 if (!(priv
->ieee
->sec
.flags
& (1 << i
))) {
5540 memset(priv
->ieee
->sec
.keys
[i
], 0, WEP_KEY_LEN
);
5541 priv
->ieee
->sec
.key_sizes
[i
] = 0;
5543 err
= ipw2100_set_key(priv
, i
,
5544 priv
->ieee
->sec
.keys
[i
],
5552 ipw2100_set_key_index(priv
, priv
->ieee
->crypt_info
.tx_keyidx
, 1);
5555 /* Always enable privacy so the Host can filter WEP packets if
5556 * encrypted data is sent up */
5558 ipw2100_set_wep_flags(priv
,
5560 enabled
? IPW_PRIVACY_CAPABLE
: 0, 1);
5564 priv
->status
&= ~STATUS_SECURITY_UPDATED
;
5568 ipw2100_enable_adapter(priv
);
5573 static void ipw2100_security_work(struct work_struct
*work
)
5575 struct ipw2100_priv
*priv
=
5576 container_of(work
, struct ipw2100_priv
, security_work
.work
);
5578 /* If we happen to have reconnected before we get a chance to
5579 * process this, then update the security settings--which causes
5580 * a disassociation to occur */
5581 if (!(priv
->status
& STATUS_ASSOCIATED
) &&
5582 priv
->status
& STATUS_SECURITY_UPDATED
)
5583 ipw2100_configure_security(priv
, 0);
5586 static void shim__set_security(struct net_device
*dev
,
5587 struct libipw_security
*sec
)
5589 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5590 int i
, force_update
= 0;
5592 mutex_lock(&priv
->action_mutex
);
5593 if (!(priv
->status
& STATUS_INITIALIZED
))
5596 for (i
= 0; i
< 4; i
++) {
5597 if (sec
->flags
& (1 << i
)) {
5598 priv
->ieee
->sec
.key_sizes
[i
] = sec
->key_sizes
[i
];
5599 if (sec
->key_sizes
[i
] == 0)
5600 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5602 memcpy(priv
->ieee
->sec
.keys
[i
], sec
->keys
[i
],
5604 if (sec
->level
== SEC_LEVEL_1
) {
5605 priv
->ieee
->sec
.flags
|= (1 << i
);
5606 priv
->status
|= STATUS_SECURITY_UPDATED
;
5608 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5612 if ((sec
->flags
& SEC_ACTIVE_KEY
) &&
5613 priv
->ieee
->sec
.active_key
!= sec
->active_key
) {
5614 if (sec
->active_key
<= 3) {
5615 priv
->ieee
->sec
.active_key
= sec
->active_key
;
5616 priv
->ieee
->sec
.flags
|= SEC_ACTIVE_KEY
;
5618 priv
->ieee
->sec
.flags
&= ~SEC_ACTIVE_KEY
;
5620 priv
->status
|= STATUS_SECURITY_UPDATED
;
5623 if ((sec
->flags
& SEC_AUTH_MODE
) &&
5624 (priv
->ieee
->sec
.auth_mode
!= sec
->auth_mode
)) {
5625 priv
->ieee
->sec
.auth_mode
= sec
->auth_mode
;
5626 priv
->ieee
->sec
.flags
|= SEC_AUTH_MODE
;
5627 priv
->status
|= STATUS_SECURITY_UPDATED
;
5630 if (sec
->flags
& SEC_ENABLED
&& priv
->ieee
->sec
.enabled
!= sec
->enabled
) {
5631 priv
->ieee
->sec
.flags
|= SEC_ENABLED
;
5632 priv
->ieee
->sec
.enabled
= sec
->enabled
;
5633 priv
->status
|= STATUS_SECURITY_UPDATED
;
5637 if (sec
->flags
& SEC_ENCRYPT
)
5638 priv
->ieee
->sec
.encrypt
= sec
->encrypt
;
5640 if (sec
->flags
& SEC_LEVEL
&& priv
->ieee
->sec
.level
!= sec
->level
) {
5641 priv
->ieee
->sec
.level
= sec
->level
;
5642 priv
->ieee
->sec
.flags
|= SEC_LEVEL
;
5643 priv
->status
|= STATUS_SECURITY_UPDATED
;
5646 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5647 priv
->ieee
->sec
.flags
& (1 << 8) ? '1' : '0',
5648 priv
->ieee
->sec
.flags
& (1 << 7) ? '1' : '0',
5649 priv
->ieee
->sec
.flags
& (1 << 6) ? '1' : '0',
5650 priv
->ieee
->sec
.flags
& (1 << 5) ? '1' : '0',
5651 priv
->ieee
->sec
.flags
& (1 << 4) ? '1' : '0',
5652 priv
->ieee
->sec
.flags
& (1 << 3) ? '1' : '0',
5653 priv
->ieee
->sec
.flags
& (1 << 2) ? '1' : '0',
5654 priv
->ieee
->sec
.flags
& (1 << 1) ? '1' : '0',
5655 priv
->ieee
->sec
.flags
& (1 << 0) ? '1' : '0');
5657 /* As a temporary work around to enable WPA until we figure out why
5658 * wpa_supplicant toggles the security capability of the driver, which
5659 * forces a disassocation with force_update...
5661 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5662 if (!(priv
->status
& (STATUS_ASSOCIATED
| STATUS_ASSOCIATING
)))
5663 ipw2100_configure_security(priv
, 0);
5665 mutex_unlock(&priv
->action_mutex
);
5668 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
)
5674 IPW_DEBUG_INFO("enter\n");
5676 err
= ipw2100_disable_adapter(priv
);
5679 #ifdef CONFIG_IPW2100_MONITOR
5680 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
5681 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5685 IPW_DEBUG_INFO("exit\n");
5689 #endif /* CONFIG_IPW2100_MONITOR */
5691 err
= ipw2100_read_mac_address(priv
);
5695 err
= ipw2100_set_mac_address(priv
, batch_mode
);
5699 err
= ipw2100_set_port_type(priv
, priv
->ieee
->iw_mode
, batch_mode
);
5703 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5704 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5709 err
= ipw2100_system_config(priv
, batch_mode
);
5713 err
= ipw2100_set_tx_rates(priv
, priv
->tx_rates
, batch_mode
);
5717 /* Default to power mode OFF */
5718 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
5722 err
= ipw2100_set_rts_threshold(priv
, priv
->rts_threshold
);
5726 if (priv
->config
& CFG_STATIC_BSSID
)
5727 bssid
= priv
->bssid
;
5730 err
= ipw2100_set_mandatory_bssid(priv
, bssid
, batch_mode
);
5734 if (priv
->config
& CFG_STATIC_ESSID
)
5735 err
= ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
5738 err
= ipw2100_set_essid(priv
, NULL
, 0, batch_mode
);
5742 err
= ipw2100_configure_security(priv
, batch_mode
);
5746 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5748 ipw2100_set_ibss_beacon_interval(priv
,
5749 priv
->beacon_interval
,
5754 err
= ipw2100_set_tx_power(priv
, priv
->tx_power
);
5760 err = ipw2100_set_fragmentation_threshold(
5761 priv, priv->frag_threshold, batch_mode);
5766 IPW_DEBUG_INFO("exit\n");
5771 /*************************************************************************
5773 * EXTERNALLY CALLED METHODS
5775 *************************************************************************/
5777 /* This method is called by the network layer -- not to be confused with
5778 * ipw2100_set_mac_address() declared above called by this driver (and this
5779 * method as well) to talk to the firmware */
5780 static int ipw2100_set_address(struct net_device
*dev
, void *p
)
5782 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5783 struct sockaddr
*addr
= p
;
5786 if (!is_valid_ether_addr(addr
->sa_data
))
5787 return -EADDRNOTAVAIL
;
5789 mutex_lock(&priv
->action_mutex
);
5791 priv
->config
|= CFG_CUSTOM_MAC
;
5792 memcpy(priv
->mac_addr
, addr
->sa_data
, ETH_ALEN
);
5794 err
= ipw2100_set_mac_address(priv
, 0);
5798 priv
->reset_backoff
= 0;
5799 mutex_unlock(&priv
->action_mutex
);
5800 ipw2100_reset_adapter(&priv
->reset_work
.work
);
5804 mutex_unlock(&priv
->action_mutex
);
5808 static int ipw2100_open(struct net_device
*dev
)
5810 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5811 unsigned long flags
;
5812 IPW_DEBUG_INFO("dev->open\n");
5814 spin_lock_irqsave(&priv
->low_lock
, flags
);
5815 if (priv
->status
& STATUS_ASSOCIATED
) {
5816 netif_carrier_on(dev
);
5817 netif_start_queue(dev
);
5819 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5824 static int ipw2100_close(struct net_device
*dev
)
5826 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5827 unsigned long flags
;
5828 struct list_head
*element
;
5829 struct ipw2100_tx_packet
*packet
;
5831 IPW_DEBUG_INFO("enter\n");
5833 spin_lock_irqsave(&priv
->low_lock
, flags
);
5835 if (priv
->status
& STATUS_ASSOCIATED
)
5836 netif_carrier_off(dev
);
5837 netif_stop_queue(dev
);
5839 /* Flush the TX queue ... */
5840 while (!list_empty(&priv
->tx_pend_list
)) {
5841 element
= priv
->tx_pend_list
.next
;
5842 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
5845 DEC_STAT(&priv
->tx_pend_stat
);
5847 libipw_txb_free(packet
->info
.d_struct
.txb
);
5848 packet
->info
.d_struct
.txb
= NULL
;
5850 list_add_tail(element
, &priv
->tx_free_list
);
5851 INC_STAT(&priv
->tx_free_stat
);
5853 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5855 IPW_DEBUG_INFO("exit\n");
5861 * TODO: Fix this function... its just wrong
5863 static void ipw2100_tx_timeout(struct net_device
*dev
)
5865 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5867 dev
->stats
.tx_errors
++;
5869 #ifdef CONFIG_IPW2100_MONITOR
5870 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
5874 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5876 schedule_reset(priv
);
5879 static int ipw2100_wpa_enable(struct ipw2100_priv
*priv
, int value
)
5881 /* This is called when wpa_supplicant loads and closes the driver
5883 priv
->ieee
->wpa_enabled
= value
;
5887 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv
*priv
, int value
)
5890 struct libipw_device
*ieee
= priv
->ieee
;
5891 struct libipw_security sec
= {
5892 .flags
= SEC_AUTH_MODE
,
5896 if (value
& IW_AUTH_ALG_SHARED_KEY
) {
5897 sec
.auth_mode
= WLAN_AUTH_SHARED_KEY
;
5899 } else if (value
& IW_AUTH_ALG_OPEN_SYSTEM
) {
5900 sec
.auth_mode
= WLAN_AUTH_OPEN
;
5902 } else if (value
& IW_AUTH_ALG_LEAP
) {
5903 sec
.auth_mode
= WLAN_AUTH_LEAP
;
5908 if (ieee
->set_security
)
5909 ieee
->set_security(ieee
->dev
, &sec
);
5916 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv
*priv
,
5917 char *wpa_ie
, int wpa_ie_len
)
5920 struct ipw2100_wpa_assoc_frame frame
;
5922 frame
.fixed_ie_mask
= 0;
5925 memcpy(frame
.var_ie
, wpa_ie
, wpa_ie_len
);
5926 frame
.var_ie_len
= wpa_ie_len
;
5928 /* make sure WPA is enabled */
5929 ipw2100_wpa_enable(priv
, 1);
5930 ipw2100_set_wpa_ie(priv
, &frame
, 0);
5933 static void ipw_ethtool_get_drvinfo(struct net_device
*dev
,
5934 struct ethtool_drvinfo
*info
)
5936 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5937 char fw_ver
[64], ucode_ver
[64];
5939 strlcpy(info
->driver
, DRV_NAME
, sizeof(info
->driver
));
5940 strlcpy(info
->version
, DRV_VERSION
, sizeof(info
->version
));
5942 ipw2100_get_fwversion(priv
, fw_ver
, sizeof(fw_ver
));
5943 ipw2100_get_ucodeversion(priv
, ucode_ver
, sizeof(ucode_ver
));
5945 snprintf(info
->fw_version
, sizeof(info
->fw_version
), "%s:%d:%s",
5946 fw_ver
, priv
->eeprom_version
, ucode_ver
);
5948 strlcpy(info
->bus_info
, pci_name(priv
->pci_dev
),
5949 sizeof(info
->bus_info
));
5952 static u32
ipw2100_ethtool_get_link(struct net_device
*dev
)
5954 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5955 return (priv
->status
& STATUS_ASSOCIATED
) ? 1 : 0;
5958 static const struct ethtool_ops ipw2100_ethtool_ops
= {
5959 .get_link
= ipw2100_ethtool_get_link
,
5960 .get_drvinfo
= ipw_ethtool_get_drvinfo
,
5963 static void ipw2100_hang_check(struct work_struct
*work
)
5965 struct ipw2100_priv
*priv
=
5966 container_of(work
, struct ipw2100_priv
, hang_check
.work
);
5967 unsigned long flags
;
5968 u32 rtc
= 0xa5a5a5a5;
5969 u32 len
= sizeof(rtc
);
5972 spin_lock_irqsave(&priv
->low_lock
, flags
);
5974 if (priv
->fatal_error
!= 0) {
5975 /* If fatal_error is set then we need to restart */
5976 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
5977 priv
->net_dev
->name
);
5980 } else if (ipw2100_get_ordinal(priv
, IPW_ORD_RTC_TIME
, &rtc
, &len
) ||
5981 (rtc
== priv
->last_rtc
)) {
5982 /* Check if firmware is hung */
5983 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
5984 priv
->net_dev
->name
);
5991 priv
->stop_hang_check
= 1;
5994 /* Restart the NIC */
5995 schedule_reset(priv
);
5998 priv
->last_rtc
= rtc
;
6000 if (!priv
->stop_hang_check
)
6001 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
6003 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6006 static void ipw2100_rf_kill(struct work_struct
*work
)
6008 struct ipw2100_priv
*priv
=
6009 container_of(work
, struct ipw2100_priv
, rf_kill
.work
);
6010 unsigned long flags
;
6012 spin_lock_irqsave(&priv
->low_lock
, flags
);
6014 if (rf_kill_active(priv
)) {
6015 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
6016 if (!priv
->stop_rf_kill
)
6017 schedule_delayed_work(&priv
->rf_kill
,
6018 round_jiffies_relative(HZ
));
6022 /* RF Kill is now disabled, so bring the device back up */
6024 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6025 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
6027 schedule_reset(priv
);
6029 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6033 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6036 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
);
6038 static const struct net_device_ops ipw2100_netdev_ops
= {
6039 .ndo_open
= ipw2100_open
,
6040 .ndo_stop
= ipw2100_close
,
6041 .ndo_start_xmit
= libipw_xmit
,
6042 .ndo_change_mtu
= libipw_change_mtu
,
6043 .ndo_tx_timeout
= ipw2100_tx_timeout
,
6044 .ndo_set_mac_address
= ipw2100_set_address
,
6045 .ndo_validate_addr
= eth_validate_addr
,
6048 /* Look into using netdev destructor to shutdown libipw? */
6050 static struct net_device
*ipw2100_alloc_device(struct pci_dev
*pci_dev
,
6051 void __iomem
* ioaddr
)
6053 struct ipw2100_priv
*priv
;
6054 struct net_device
*dev
;
6056 dev
= alloc_libipw(sizeof(struct ipw2100_priv
), 0);
6059 priv
= libipw_priv(dev
);
6060 priv
->ieee
= netdev_priv(dev
);
6061 priv
->pci_dev
= pci_dev
;
6062 priv
->net_dev
= dev
;
6063 priv
->ioaddr
= ioaddr
;
6065 priv
->ieee
->hard_start_xmit
= ipw2100_tx
;
6066 priv
->ieee
->set_security
= shim__set_security
;
6068 priv
->ieee
->perfect_rssi
= -20;
6069 priv
->ieee
->worst_rssi
= -85;
6071 dev
->netdev_ops
= &ipw2100_netdev_ops
;
6072 dev
->ethtool_ops
= &ipw2100_ethtool_ops
;
6073 dev
->wireless_handlers
= &ipw2100_wx_handler_def
;
6074 priv
->wireless_data
.libipw
= priv
->ieee
;
6075 dev
->wireless_data
= &priv
->wireless_data
;
6076 dev
->watchdog_timeo
= 3 * HZ
;
6079 /* NOTE: We don't use the wireless_handlers hook
6080 * in dev as the system will start throwing WX requests
6081 * to us before we're actually initialized and it just
6082 * ends up causing problems. So, we just handle
6083 * the WX extensions through the ipw2100_ioctl interface */
6085 /* memset() puts everything to 0, so we only have explicitly set
6086 * those values that need to be something else */
6088 /* If power management is turned on, default to AUTO mode */
6089 priv
->power_mode
= IPW_POWER_AUTO
;
6091 #ifdef CONFIG_IPW2100_MONITOR
6092 priv
->config
|= CFG_CRC_CHECK
;
6094 priv
->ieee
->wpa_enabled
= 0;
6095 priv
->ieee
->drop_unencrypted
= 0;
6096 priv
->ieee
->privacy_invoked
= 0;
6097 priv
->ieee
->ieee802_1x
= 1;
6099 /* Set module parameters */
6100 switch (network_mode
) {
6102 priv
->ieee
->iw_mode
= IW_MODE_ADHOC
;
6104 #ifdef CONFIG_IPW2100_MONITOR
6106 priv
->ieee
->iw_mode
= IW_MODE_MONITOR
;
6111 priv
->ieee
->iw_mode
= IW_MODE_INFRA
;
6116 priv
->status
|= STATUS_RF_KILL_SW
;
6119 ((channel
>= REG_MIN_CHANNEL
) && (channel
<= REG_MAX_CHANNEL
))) {
6120 priv
->config
|= CFG_STATIC_CHANNEL
;
6121 priv
->channel
= channel
;
6125 priv
->config
|= CFG_ASSOCIATE
;
6127 priv
->beacon_interval
= DEFAULT_BEACON_INTERVAL
;
6128 priv
->short_retry_limit
= DEFAULT_SHORT_RETRY_LIMIT
;
6129 priv
->long_retry_limit
= DEFAULT_LONG_RETRY_LIMIT
;
6130 priv
->rts_threshold
= DEFAULT_RTS_THRESHOLD
| RTS_DISABLED
;
6131 priv
->frag_threshold
= DEFAULT_FTS
| FRAG_DISABLED
;
6132 priv
->tx_power
= IPW_TX_POWER_DEFAULT
;
6133 priv
->tx_rates
= DEFAULT_TX_RATES
;
6135 strcpy(priv
->nick
, "ipw2100");
6137 spin_lock_init(&priv
->low_lock
);
6138 mutex_init(&priv
->action_mutex
);
6139 mutex_init(&priv
->adapter_mutex
);
6141 init_waitqueue_head(&priv
->wait_command_queue
);
6143 netif_carrier_off(dev
);
6145 INIT_LIST_HEAD(&priv
->msg_free_list
);
6146 INIT_LIST_HEAD(&priv
->msg_pend_list
);
6147 INIT_STAT(&priv
->msg_free_stat
);
6148 INIT_STAT(&priv
->msg_pend_stat
);
6150 INIT_LIST_HEAD(&priv
->tx_free_list
);
6151 INIT_LIST_HEAD(&priv
->tx_pend_list
);
6152 INIT_STAT(&priv
->tx_free_stat
);
6153 INIT_STAT(&priv
->tx_pend_stat
);
6155 INIT_LIST_HEAD(&priv
->fw_pend_list
);
6156 INIT_STAT(&priv
->fw_pend_stat
);
6158 INIT_DELAYED_WORK(&priv
->reset_work
, ipw2100_reset_adapter
);
6159 INIT_DELAYED_WORK(&priv
->security_work
, ipw2100_security_work
);
6160 INIT_DELAYED_WORK(&priv
->wx_event_work
, ipw2100_wx_event_work
);
6161 INIT_DELAYED_WORK(&priv
->hang_check
, ipw2100_hang_check
);
6162 INIT_DELAYED_WORK(&priv
->rf_kill
, ipw2100_rf_kill
);
6163 INIT_DELAYED_WORK(&priv
->scan_event
, ipw2100_scan_event
);
6165 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
6166 ipw2100_irq_tasklet
, (unsigned long)priv
);
6168 /* NOTE: We do not start the deferred work for status checks yet */
6169 priv
->stop_rf_kill
= 1;
6170 priv
->stop_hang_check
= 1;
6175 static int ipw2100_pci_init_one(struct pci_dev
*pci_dev
,
6176 const struct pci_device_id
*ent
)
6178 void __iomem
*ioaddr
;
6179 struct net_device
*dev
= NULL
;
6180 struct ipw2100_priv
*priv
= NULL
;
6185 IPW_DEBUG_INFO("enter\n");
6187 if (!(pci_resource_flags(pci_dev
, 0) & IORESOURCE_MEM
)) {
6188 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6193 ioaddr
= pci_iomap(pci_dev
, 0, 0);
6195 printk(KERN_WARNING DRV_NAME
6196 "Error calling ioremap_nocache.\n");
6201 /* allocate and initialize our net_device */
6202 dev
= ipw2100_alloc_device(pci_dev
, ioaddr
);
6204 printk(KERN_WARNING DRV_NAME
6205 "Error calling ipw2100_alloc_device.\n");
6210 /* set up PCI mappings for device */
6211 err
= pci_enable_device(pci_dev
);
6213 printk(KERN_WARNING DRV_NAME
6214 "Error calling pci_enable_device.\n");
6218 priv
= libipw_priv(dev
);
6220 pci_set_master(pci_dev
);
6221 pci_set_drvdata(pci_dev
, priv
);
6223 err
= pci_set_dma_mask(pci_dev
, DMA_BIT_MASK(32));
6225 printk(KERN_WARNING DRV_NAME
6226 "Error calling pci_set_dma_mask.\n");
6227 pci_disable_device(pci_dev
);
6231 err
= pci_request_regions(pci_dev
, DRV_NAME
);
6233 printk(KERN_WARNING DRV_NAME
6234 "Error calling pci_request_regions.\n");
6235 pci_disable_device(pci_dev
);
6239 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6240 * PCI Tx retries from interfering with C3 CPU state */
6241 pci_read_config_dword(pci_dev
, 0x40, &val
);
6242 if ((val
& 0x0000ff00) != 0)
6243 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6245 if (!ipw2100_hw_is_adapter_in_system(dev
)) {
6246 printk(KERN_WARNING DRV_NAME
6247 "Device not found via register read.\n");
6252 SET_NETDEV_DEV(dev
, &pci_dev
->dev
);
6254 /* Force interrupts to be shut off on the device */
6255 priv
->status
|= STATUS_INT_ENABLED
;
6256 ipw2100_disable_interrupts(priv
);
6258 /* Allocate and initialize the Tx/Rx queues and lists */
6259 if (ipw2100_queues_allocate(priv
)) {
6260 printk(KERN_WARNING DRV_NAME
6261 "Error calling ipw2100_queues_allocate.\n");
6265 ipw2100_queues_initialize(priv
);
6267 err
= request_irq(pci_dev
->irq
,
6268 ipw2100_interrupt
, IRQF_SHARED
, dev
->name
, priv
);
6270 printk(KERN_WARNING DRV_NAME
6271 "Error calling request_irq: %d.\n", pci_dev
->irq
);
6274 dev
->irq
= pci_dev
->irq
;
6276 IPW_DEBUG_INFO("Attempting to register device...\n");
6278 printk(KERN_INFO DRV_NAME
6279 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6281 err
= ipw2100_up(priv
, 1);
6285 err
= ipw2100_wdev_init(dev
);
6290 /* Bring up the interface. Pre 0.46, after we registered the
6291 * network device we would call ipw2100_up. This introduced a race
6292 * condition with newer hotplug configurations (network was coming
6293 * up and making calls before the device was initialized).
6295 err
= register_netdev(dev
);
6297 printk(KERN_WARNING DRV_NAME
6298 "Error calling register_netdev.\n");
6303 mutex_lock(&priv
->action_mutex
);
6305 IPW_DEBUG_INFO("%s: Bound to %s\n", dev
->name
, pci_name(pci_dev
));
6307 /* perform this after register_netdev so that dev->name is set */
6308 err
= sysfs_create_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6312 /* If the RF Kill switch is disabled, go ahead and complete the
6313 * startup sequence */
6314 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6315 /* Enable the adapter - sends HOST_COMPLETE */
6316 if (ipw2100_enable_adapter(priv
)) {
6317 printk(KERN_WARNING DRV_NAME
6318 ": %s: failed in call to enable adapter.\n",
6319 priv
->net_dev
->name
);
6320 ipw2100_hw_stop_adapter(priv
);
6325 /* Start a scan . . . */
6326 ipw2100_set_scan_options(priv
);
6327 ipw2100_start_scan(priv
);
6330 IPW_DEBUG_INFO("exit\n");
6332 priv
->status
|= STATUS_INITIALIZED
;
6334 mutex_unlock(&priv
->action_mutex
);
6339 mutex_unlock(&priv
->action_mutex
);
6342 if (registered
>= 2)
6343 unregister_netdev(dev
);
6346 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6347 kfree(priv
->ieee
->bg_band
.channels
);
6350 ipw2100_hw_stop_adapter(priv
);
6352 ipw2100_disable_interrupts(priv
);
6355 free_irq(dev
->irq
, priv
);
6357 ipw2100_kill_works(priv
);
6359 /* These are safe to call even if they weren't allocated */
6360 ipw2100_queues_free(priv
);
6361 sysfs_remove_group(&pci_dev
->dev
.kobj
,
6362 &ipw2100_attribute_group
);
6364 free_libipw(dev
, 0);
6365 pci_set_drvdata(pci_dev
, NULL
);
6368 pci_iounmap(pci_dev
, ioaddr
);
6370 pci_release_regions(pci_dev
);
6371 pci_disable_device(pci_dev
);
6375 static void ipw2100_pci_remove_one(struct pci_dev
*pci_dev
)
6377 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6378 struct net_device
*dev
= priv
->net_dev
;
6380 mutex_lock(&priv
->action_mutex
);
6382 priv
->status
&= ~STATUS_INITIALIZED
;
6384 sysfs_remove_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6387 if (ipw2100_firmware
.version
)
6388 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
6390 /* Take down the hardware */
6393 /* Release the mutex so that the network subsystem can
6394 * complete any needed calls into the driver... */
6395 mutex_unlock(&priv
->action_mutex
);
6397 /* Unregister the device first - this results in close()
6398 * being called if the device is open. If we free storage
6399 * first, then close() will crash.
6400 * FIXME: remove the comment above. */
6401 unregister_netdev(dev
);
6403 ipw2100_kill_works(priv
);
6405 ipw2100_queues_free(priv
);
6407 /* Free potential debugging firmware snapshot */
6408 ipw2100_snapshot_free(priv
);
6410 free_irq(dev
->irq
, priv
);
6412 pci_iounmap(pci_dev
, priv
->ioaddr
);
6414 /* wiphy_unregister needs to be here, before free_libipw */
6415 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6416 kfree(priv
->ieee
->bg_band
.channels
);
6417 free_libipw(dev
, 0);
6419 pci_release_regions(pci_dev
);
6420 pci_disable_device(pci_dev
);
6422 IPW_DEBUG_INFO("exit\n");
6426 static int ipw2100_suspend(struct pci_dev
*pci_dev
, pm_message_t state
)
6428 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6429 struct net_device
*dev
= priv
->net_dev
;
6431 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev
->name
);
6433 mutex_lock(&priv
->action_mutex
);
6434 if (priv
->status
& STATUS_INITIALIZED
) {
6435 /* Take down the device; powers it off, etc. */
6439 /* Remove the PRESENT state of the device */
6440 netif_device_detach(dev
);
6442 pci_save_state(pci_dev
);
6443 pci_disable_device(pci_dev
);
6444 pci_set_power_state(pci_dev
, PCI_D3hot
);
6446 priv
->suspend_at
= get_seconds();
6448 mutex_unlock(&priv
->action_mutex
);
6453 static int ipw2100_resume(struct pci_dev
*pci_dev
)
6455 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6456 struct net_device
*dev
= priv
->net_dev
;
6460 if (IPW2100_PM_DISABLED
)
6463 mutex_lock(&priv
->action_mutex
);
6465 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev
->name
);
6467 pci_set_power_state(pci_dev
, PCI_D0
);
6468 err
= pci_enable_device(pci_dev
);
6470 printk(KERN_ERR
"%s: pci_enable_device failed on resume\n",
6472 mutex_unlock(&priv
->action_mutex
);
6475 pci_restore_state(pci_dev
);
6478 * Suspend/Resume resets the PCI configuration space, so we have to
6479 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6480 * from interfering with C3 CPU state. pci_restore_state won't help
6481 * here since it only restores the first 64 bytes pci config header.
6483 pci_read_config_dword(pci_dev
, 0x40, &val
);
6484 if ((val
& 0x0000ff00) != 0)
6485 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6487 /* Set the device back into the PRESENT state; this will also wake
6488 * the queue of needed */
6489 netif_device_attach(dev
);
6491 priv
->suspend_time
= get_seconds() - priv
->suspend_at
;
6493 /* Bring the device back up */
6494 if (!(priv
->status
& STATUS_RF_KILL_SW
))
6495 ipw2100_up(priv
, 0);
6497 mutex_unlock(&priv
->action_mutex
);
6503 static void ipw2100_shutdown(struct pci_dev
*pci_dev
)
6505 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6507 /* Take down the device; powers it off, etc. */
6510 pci_disable_device(pci_dev
);
6513 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6515 static DEFINE_PCI_DEVICE_TABLE(ipw2100_pci_id_table
) = {
6516 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6517 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6518 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6519 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6520 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6521 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6522 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6523 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6524 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6525 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6526 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6527 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6528 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6530 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6531 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6532 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6533 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6534 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6536 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6537 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6538 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6539 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6540 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6541 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6542 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6544 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6546 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6547 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6548 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6549 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6550 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6551 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6552 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6554 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6555 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6556 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6557 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6558 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6559 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6561 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6565 MODULE_DEVICE_TABLE(pci
, ipw2100_pci_id_table
);
6567 static struct pci_driver ipw2100_pci_driver
= {
6569 .id_table
= ipw2100_pci_id_table
,
6570 .probe
= ipw2100_pci_init_one
,
6571 .remove
= ipw2100_pci_remove_one
,
6573 .suspend
= ipw2100_suspend
,
6574 .resume
= ipw2100_resume
,
6576 .shutdown
= ipw2100_shutdown
,
6580 * Initialize the ipw2100 driver/module
6582 * @returns 0 if ok, < 0 errno node con error.
6584 * Note: we cannot init the /proc stuff until the PCI driver is there,
6585 * or we risk an unlikely race condition on someone accessing
6586 * uninitialized data in the PCI dev struct through /proc.
6588 static int __init
ipw2100_init(void)
6592 printk(KERN_INFO DRV_NAME
": %s, %s\n", DRV_DESCRIPTION
, DRV_VERSION
);
6593 printk(KERN_INFO DRV_NAME
": %s\n", DRV_COPYRIGHT
);
6595 pm_qos_add_request(&ipw2100_pm_qos_req
, PM_QOS_CPU_DMA_LATENCY
,
6596 PM_QOS_DEFAULT_VALUE
);
6598 ret
= pci_register_driver(&ipw2100_pci_driver
);
6602 #ifdef CONFIG_IPW2100_DEBUG
6603 ipw2100_debug_level
= debug
;
6604 ret
= driver_create_file(&ipw2100_pci_driver
.driver
,
6605 &driver_attr_debug_level
);
6613 * Cleanup ipw2100 driver registration
6615 static void __exit
ipw2100_exit(void)
6617 /* FIXME: IPG: check that we have no instances of the devices open */
6618 #ifdef CONFIG_IPW2100_DEBUG
6619 driver_remove_file(&ipw2100_pci_driver
.driver
,
6620 &driver_attr_debug_level
);
6622 pci_unregister_driver(&ipw2100_pci_driver
);
6623 pm_qos_remove_request(&ipw2100_pm_qos_req
);
6626 module_init(ipw2100_init
);
6627 module_exit(ipw2100_exit
);
6629 static int ipw2100_wx_get_name(struct net_device
*dev
,
6630 struct iw_request_info
*info
,
6631 union iwreq_data
*wrqu
, char *extra
)
6634 * This can be called at any time. No action lock required
6637 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6638 if (!(priv
->status
& STATUS_ASSOCIATED
))
6639 strcpy(wrqu
->name
, "unassociated");
6641 snprintf(wrqu
->name
, IFNAMSIZ
, "IEEE 802.11b");
6643 IPW_DEBUG_WX("Name: %s\n", wrqu
->name
);
6647 static int ipw2100_wx_set_freq(struct net_device
*dev
,
6648 struct iw_request_info
*info
,
6649 union iwreq_data
*wrqu
, char *extra
)
6651 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6652 struct iw_freq
*fwrq
= &wrqu
->freq
;
6655 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
6658 mutex_lock(&priv
->action_mutex
);
6659 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6664 /* if setting by freq convert to channel */
6666 if ((fwrq
->m
>= (int)2.412e8
&& fwrq
->m
<= (int)2.487e8
)) {
6667 int f
= fwrq
->m
/ 100000;
6670 while ((c
< REG_MAX_CHANNEL
) &&
6671 (f
!= ipw2100_frequencies
[c
]))
6674 /* hack to fall through */
6680 if (fwrq
->e
> 0 || fwrq
->m
> 1000) {
6683 } else { /* Set the channel */
6684 IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq
->m
);
6685 err
= ipw2100_set_channel(priv
, fwrq
->m
, 0);
6689 mutex_unlock(&priv
->action_mutex
);
6693 static int ipw2100_wx_get_freq(struct net_device
*dev
,
6694 struct iw_request_info
*info
,
6695 union iwreq_data
*wrqu
, char *extra
)
6698 * This can be called at any time. No action lock required
6701 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6705 /* If we are associated, trying to associate, or have a statically
6706 * configured CHANNEL then return that; otherwise return ANY */
6707 if (priv
->config
& CFG_STATIC_CHANNEL
||
6708 priv
->status
& STATUS_ASSOCIATED
)
6709 wrqu
->freq
.m
= priv
->channel
;
6713 IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv
->channel
);
6718 static int ipw2100_wx_set_mode(struct net_device
*dev
,
6719 struct iw_request_info
*info
,
6720 union iwreq_data
*wrqu
, char *extra
)
6722 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6725 IPW_DEBUG_WX("SET Mode -> %d\n", wrqu
->mode
);
6727 if (wrqu
->mode
== priv
->ieee
->iw_mode
)
6730 mutex_lock(&priv
->action_mutex
);
6731 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6736 switch (wrqu
->mode
) {
6737 #ifdef CONFIG_IPW2100_MONITOR
6738 case IW_MODE_MONITOR
:
6739 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
6741 #endif /* CONFIG_IPW2100_MONITOR */
6743 err
= ipw2100_switch_mode(priv
, IW_MODE_ADHOC
);
6748 err
= ipw2100_switch_mode(priv
, IW_MODE_INFRA
);
6753 mutex_unlock(&priv
->action_mutex
);
6757 static int ipw2100_wx_get_mode(struct net_device
*dev
,
6758 struct iw_request_info
*info
,
6759 union iwreq_data
*wrqu
, char *extra
)
6762 * This can be called at any time. No action lock required
6765 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6767 wrqu
->mode
= priv
->ieee
->iw_mode
;
6768 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu
->mode
);
6773 #define POWER_MODES 5
6775 /* Values are in microsecond */
6776 static const s32 timeout_duration
[POWER_MODES
] = {
6784 static const s32 period_duration
[POWER_MODES
] = {
6792 static int ipw2100_wx_get_range(struct net_device
*dev
,
6793 struct iw_request_info
*info
,
6794 union iwreq_data
*wrqu
, char *extra
)
6797 * This can be called at any time. No action lock required
6800 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6801 struct iw_range
*range
= (struct iw_range
*)extra
;
6805 wrqu
->data
.length
= sizeof(*range
);
6806 memset(range
, 0, sizeof(*range
));
6808 /* Let's try to keep this struct in the same order as in
6809 * linux/include/wireless.h
6812 /* TODO: See what values we can set, and remove the ones we can't
6813 * set, or fill them with some default data.
6816 /* ~5 Mb/s real (802.11b) */
6817 range
->throughput
= 5 * 1000 * 1000;
6819 // range->sensitivity; /* signal level threshold range */
6821 range
->max_qual
.qual
= 100;
6822 /* TODO: Find real max RSSI and stick here */
6823 range
->max_qual
.level
= 0;
6824 range
->max_qual
.noise
= 0;
6825 range
->max_qual
.updated
= 7; /* Updated all three */
6827 range
->avg_qual
.qual
= 70; /* > 8% missed beacons is 'bad' */
6828 /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
6829 range
->avg_qual
.level
= 20 + IPW2100_RSSI_TO_DBM
;
6830 range
->avg_qual
.noise
= 0;
6831 range
->avg_qual
.updated
= 7; /* Updated all three */
6833 range
->num_bitrates
= RATE_COUNT
;
6835 for (i
= 0; i
< RATE_COUNT
&& i
< IW_MAX_BITRATES
; i
++) {
6836 range
->bitrate
[i
] = ipw2100_bg_rates
[i
].bitrate
* 100 * 1000;
6839 range
->min_rts
= MIN_RTS_THRESHOLD
;
6840 range
->max_rts
= MAX_RTS_THRESHOLD
;
6841 range
->min_frag
= MIN_FRAG_THRESHOLD
;
6842 range
->max_frag
= MAX_FRAG_THRESHOLD
;
6844 range
->min_pmp
= period_duration
[0]; /* Minimal PM period */
6845 range
->max_pmp
= period_duration
[POWER_MODES
- 1]; /* Maximal PM period */
6846 range
->min_pmt
= timeout_duration
[POWER_MODES
- 1]; /* Minimal PM timeout */
6847 range
->max_pmt
= timeout_duration
[0]; /* Maximal PM timeout */
6849 /* How to decode max/min PM period */
6850 range
->pmp_flags
= IW_POWER_PERIOD
;
6851 /* How to decode max/min PM period */
6852 range
->pmt_flags
= IW_POWER_TIMEOUT
;
6853 /* What PM options are supported */
6854 range
->pm_capa
= IW_POWER_TIMEOUT
| IW_POWER_PERIOD
;
6856 range
->encoding_size
[0] = 5;
6857 range
->encoding_size
[1] = 13; /* Different token sizes */
6858 range
->num_encoding_sizes
= 2; /* Number of entry in the list */
6859 range
->max_encoding_tokens
= WEP_KEYS
; /* Max number of tokens */
6860 // range->encoding_login_index; /* token index for login token */
6862 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
6863 range
->txpower_capa
= IW_TXPOW_DBM
;
6864 range
->num_txpower
= IW_MAX_TXPOWER
;
6865 for (i
= 0, level
= (IPW_TX_POWER_MAX_DBM
* 16);
6868 ((IPW_TX_POWER_MAX_DBM
-
6869 IPW_TX_POWER_MIN_DBM
) * 16) / (IW_MAX_TXPOWER
- 1))
6870 range
->txpower
[i
] = level
/ 16;
6872 range
->txpower_capa
= 0;
6873 range
->num_txpower
= 0;
6876 /* Set the Wireless Extension versions */
6877 range
->we_version_compiled
= WIRELESS_EXT
;
6878 range
->we_version_source
= 18;
6880 // range->retry_capa; /* What retry options are supported */
6881 // range->retry_flags; /* How to decode max/min retry limit */
6882 // range->r_time_flags; /* How to decode max/min retry life */
6883 // range->min_retry; /* Minimal number of retries */
6884 // range->max_retry; /* Maximal number of retries */
6885 // range->min_r_time; /* Minimal retry lifetime */
6886 // range->max_r_time; /* Maximal retry lifetime */
6888 range
->num_channels
= FREQ_COUNT
;
6891 for (i
= 0; i
< FREQ_COUNT
; i
++) {
6892 // TODO: Include only legal frequencies for some countries
6893 // if (local->channel_mask & (1 << i)) {
6894 range
->freq
[val
].i
= i
+ 1;
6895 range
->freq
[val
].m
= ipw2100_frequencies
[i
] * 100000;
6896 range
->freq
[val
].e
= 1;
6899 if (val
== IW_MAX_FREQUENCIES
)
6902 range
->num_frequency
= val
;
6904 /* Event capability (kernel + driver) */
6905 range
->event_capa
[0] = (IW_EVENT_CAPA_K_0
|
6906 IW_EVENT_CAPA_MASK(SIOCGIWAP
));
6907 range
->event_capa
[1] = IW_EVENT_CAPA_K_1
;
6909 range
->enc_capa
= IW_ENC_CAPA_WPA
| IW_ENC_CAPA_WPA2
|
6910 IW_ENC_CAPA_CIPHER_TKIP
| IW_ENC_CAPA_CIPHER_CCMP
;
6912 IPW_DEBUG_WX("GET Range\n");
6917 static int ipw2100_wx_set_wap(struct net_device
*dev
,
6918 struct iw_request_info
*info
,
6919 union iwreq_data
*wrqu
, char *extra
)
6921 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6925 if (wrqu
->ap_addr
.sa_family
!= ARPHRD_ETHER
)
6928 mutex_lock(&priv
->action_mutex
);
6929 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6934 if (is_broadcast_ether_addr(wrqu
->ap_addr
.sa_data
) ||
6935 is_zero_ether_addr(wrqu
->ap_addr
.sa_data
)) {
6936 /* we disable mandatory BSSID association */
6937 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
6938 priv
->config
&= ~CFG_STATIC_BSSID
;
6939 err
= ipw2100_set_mandatory_bssid(priv
, NULL
, 0);
6943 priv
->config
|= CFG_STATIC_BSSID
;
6944 memcpy(priv
->mandatory_bssid_mac
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
);
6946 err
= ipw2100_set_mandatory_bssid(priv
, wrqu
->ap_addr
.sa_data
, 0);
6948 IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu
->ap_addr
.sa_data
);
6951 mutex_unlock(&priv
->action_mutex
);
6955 static int ipw2100_wx_get_wap(struct net_device
*dev
,
6956 struct iw_request_info
*info
,
6957 union iwreq_data
*wrqu
, char *extra
)
6960 * This can be called at any time. No action lock required
6963 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6965 /* If we are associated, trying to associate, or have a statically
6966 * configured BSSID then return that; otherwise return ANY */
6967 if (priv
->config
& CFG_STATIC_BSSID
|| priv
->status
& STATUS_ASSOCIATED
) {
6968 wrqu
->ap_addr
.sa_family
= ARPHRD_ETHER
;
6969 memcpy(wrqu
->ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
6971 memset(wrqu
->ap_addr
.sa_data
, 0, ETH_ALEN
);
6973 IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu
->ap_addr
.sa_data
);
6977 static int ipw2100_wx_set_essid(struct net_device
*dev
,
6978 struct iw_request_info
*info
,
6979 union iwreq_data
*wrqu
, char *extra
)
6981 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6982 char *essid
= ""; /* ANY */
6985 DECLARE_SSID_BUF(ssid
);
6987 mutex_lock(&priv
->action_mutex
);
6988 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6993 if (wrqu
->essid
.flags
&& wrqu
->essid
.length
) {
6994 length
= wrqu
->essid
.length
;
6999 IPW_DEBUG_WX("Setting ESSID to ANY\n");
7000 priv
->config
&= ~CFG_STATIC_ESSID
;
7001 err
= ipw2100_set_essid(priv
, NULL
, 0, 0);
7005 length
= min(length
, IW_ESSID_MAX_SIZE
);
7007 priv
->config
|= CFG_STATIC_ESSID
;
7009 if (priv
->essid_len
== length
&& !memcmp(priv
->essid
, extra
, length
)) {
7010 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7015 IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n",
7016 print_ssid(ssid
, essid
, length
), length
);
7018 priv
->essid_len
= length
;
7019 memcpy(priv
->essid
, essid
, priv
->essid_len
);
7021 err
= ipw2100_set_essid(priv
, essid
, length
, 0);
7024 mutex_unlock(&priv
->action_mutex
);
7028 static int ipw2100_wx_get_essid(struct net_device
*dev
,
7029 struct iw_request_info
*info
,
7030 union iwreq_data
*wrqu
, char *extra
)
7033 * This can be called at any time. No action lock required
7036 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7037 DECLARE_SSID_BUF(ssid
);
7039 /* If we are associated, trying to associate, or have a statically
7040 * configured ESSID then return that; otherwise return ANY */
7041 if (priv
->config
& CFG_STATIC_ESSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7042 IPW_DEBUG_WX("Getting essid: '%s'\n",
7043 print_ssid(ssid
, priv
->essid
, priv
->essid_len
));
7044 memcpy(extra
, priv
->essid
, priv
->essid_len
);
7045 wrqu
->essid
.length
= priv
->essid_len
;
7046 wrqu
->essid
.flags
= 1; /* active */
7048 IPW_DEBUG_WX("Getting essid: ANY\n");
7049 wrqu
->essid
.length
= 0;
7050 wrqu
->essid
.flags
= 0; /* active */
7056 static int ipw2100_wx_set_nick(struct net_device
*dev
,
7057 struct iw_request_info
*info
,
7058 union iwreq_data
*wrqu
, char *extra
)
7061 * This can be called at any time. No action lock required
7064 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7066 if (wrqu
->data
.length
> IW_ESSID_MAX_SIZE
)
7069 wrqu
->data
.length
= min((size_t) wrqu
->data
.length
, sizeof(priv
->nick
));
7070 memset(priv
->nick
, 0, sizeof(priv
->nick
));
7071 memcpy(priv
->nick
, extra
, wrqu
->data
.length
);
7073 IPW_DEBUG_WX("SET Nickname -> %s\n", priv
->nick
);
7078 static int ipw2100_wx_get_nick(struct net_device
*dev
,
7079 struct iw_request_info
*info
,
7080 union iwreq_data
*wrqu
, char *extra
)
7083 * This can be called at any time. No action lock required
7086 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7088 wrqu
->data
.length
= strlen(priv
->nick
);
7089 memcpy(extra
, priv
->nick
, wrqu
->data
.length
);
7090 wrqu
->data
.flags
= 1; /* active */
7092 IPW_DEBUG_WX("GET Nickname -> %s\n", extra
);
7097 static int ipw2100_wx_set_rate(struct net_device
*dev
,
7098 struct iw_request_info
*info
,
7099 union iwreq_data
*wrqu
, char *extra
)
7101 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7102 u32 target_rate
= wrqu
->bitrate
.value
;
7106 mutex_lock(&priv
->action_mutex
);
7107 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7114 if (target_rate
== 1000000 ||
7115 (!wrqu
->bitrate
.fixed
&& target_rate
> 1000000))
7116 rate
|= TX_RATE_1_MBIT
;
7117 if (target_rate
== 2000000 ||
7118 (!wrqu
->bitrate
.fixed
&& target_rate
> 2000000))
7119 rate
|= TX_RATE_2_MBIT
;
7120 if (target_rate
== 5500000 ||
7121 (!wrqu
->bitrate
.fixed
&& target_rate
> 5500000))
7122 rate
|= TX_RATE_5_5_MBIT
;
7123 if (target_rate
== 11000000 ||
7124 (!wrqu
->bitrate
.fixed
&& target_rate
> 11000000))
7125 rate
|= TX_RATE_11_MBIT
;
7127 rate
= DEFAULT_TX_RATES
;
7129 err
= ipw2100_set_tx_rates(priv
, rate
, 0);
7131 IPW_DEBUG_WX("SET Rate -> %04X\n", rate
);
7133 mutex_unlock(&priv
->action_mutex
);
7137 static int ipw2100_wx_get_rate(struct net_device
*dev
,
7138 struct iw_request_info
*info
,
7139 union iwreq_data
*wrqu
, char *extra
)
7141 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7143 unsigned int len
= sizeof(val
);
7146 if (!(priv
->status
& STATUS_ENABLED
) ||
7147 priv
->status
& STATUS_RF_KILL_MASK
||
7148 !(priv
->status
& STATUS_ASSOCIATED
)) {
7149 wrqu
->bitrate
.value
= 0;
7153 mutex_lock(&priv
->action_mutex
);
7154 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7159 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &val
, &len
);
7161 IPW_DEBUG_WX("failed querying ordinals.\n");
7165 switch (val
& TX_RATE_MASK
) {
7166 case TX_RATE_1_MBIT
:
7167 wrqu
->bitrate
.value
= 1000000;
7169 case TX_RATE_2_MBIT
:
7170 wrqu
->bitrate
.value
= 2000000;
7172 case TX_RATE_5_5_MBIT
:
7173 wrqu
->bitrate
.value
= 5500000;
7175 case TX_RATE_11_MBIT
:
7176 wrqu
->bitrate
.value
= 11000000;
7179 wrqu
->bitrate
.value
= 0;
7182 IPW_DEBUG_WX("GET Rate -> %d\n", wrqu
->bitrate
.value
);
7185 mutex_unlock(&priv
->action_mutex
);
7189 static int ipw2100_wx_set_rts(struct net_device
*dev
,
7190 struct iw_request_info
*info
,
7191 union iwreq_data
*wrqu
, char *extra
)
7193 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7196 /* Auto RTS not yet supported */
7197 if (wrqu
->rts
.fixed
== 0)
7200 mutex_lock(&priv
->action_mutex
);
7201 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7206 if (wrqu
->rts
.disabled
)
7207 value
= priv
->rts_threshold
| RTS_DISABLED
;
7209 if (wrqu
->rts
.value
< 1 || wrqu
->rts
.value
> 2304) {
7213 value
= wrqu
->rts
.value
;
7216 err
= ipw2100_set_rts_threshold(priv
, value
);
7218 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value
);
7220 mutex_unlock(&priv
->action_mutex
);
7224 static int ipw2100_wx_get_rts(struct net_device
*dev
,
7225 struct iw_request_info
*info
,
7226 union iwreq_data
*wrqu
, char *extra
)
7229 * This can be called at any time. No action lock required
7232 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7234 wrqu
->rts
.value
= priv
->rts_threshold
& ~RTS_DISABLED
;
7235 wrqu
->rts
.fixed
= 1; /* no auto select */
7237 /* If RTS is set to the default value, then it is disabled */
7238 wrqu
->rts
.disabled
= (priv
->rts_threshold
& RTS_DISABLED
) ? 1 : 0;
7240 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu
->rts
.value
);
7245 static int ipw2100_wx_set_txpow(struct net_device
*dev
,
7246 struct iw_request_info
*info
,
7247 union iwreq_data
*wrqu
, char *extra
)
7249 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7252 if (ipw_radio_kill_sw(priv
, wrqu
->txpower
.disabled
))
7253 return -EINPROGRESS
;
7255 if (priv
->ieee
->iw_mode
!= IW_MODE_ADHOC
)
7258 if ((wrqu
->txpower
.flags
& IW_TXPOW_TYPE
) != IW_TXPOW_DBM
)
7261 if (wrqu
->txpower
.fixed
== 0)
7262 value
= IPW_TX_POWER_DEFAULT
;
7264 if (wrqu
->txpower
.value
< IPW_TX_POWER_MIN_DBM
||
7265 wrqu
->txpower
.value
> IPW_TX_POWER_MAX_DBM
)
7268 value
= wrqu
->txpower
.value
;
7271 mutex_lock(&priv
->action_mutex
);
7272 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7277 err
= ipw2100_set_tx_power(priv
, value
);
7279 IPW_DEBUG_WX("SET TX Power -> %d\n", value
);
7282 mutex_unlock(&priv
->action_mutex
);
7286 static int ipw2100_wx_get_txpow(struct net_device
*dev
,
7287 struct iw_request_info
*info
,
7288 union iwreq_data
*wrqu
, char *extra
)
7291 * This can be called at any time. No action lock required
7294 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7296 wrqu
->txpower
.disabled
= (priv
->status
& STATUS_RF_KILL_MASK
) ? 1 : 0;
7298 if (priv
->tx_power
== IPW_TX_POWER_DEFAULT
) {
7299 wrqu
->txpower
.fixed
= 0;
7300 wrqu
->txpower
.value
= IPW_TX_POWER_MAX_DBM
;
7302 wrqu
->txpower
.fixed
= 1;
7303 wrqu
->txpower
.value
= priv
->tx_power
;
7306 wrqu
->txpower
.flags
= IW_TXPOW_DBM
;
7308 IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu
->txpower
.value
);
7313 static int ipw2100_wx_set_frag(struct net_device
*dev
,
7314 struct iw_request_info
*info
,
7315 union iwreq_data
*wrqu
, char *extra
)
7318 * This can be called at any time. No action lock required
7321 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7323 if (!wrqu
->frag
.fixed
)
7326 if (wrqu
->frag
.disabled
) {
7327 priv
->frag_threshold
|= FRAG_DISABLED
;
7328 priv
->ieee
->fts
= DEFAULT_FTS
;
7330 if (wrqu
->frag
.value
< MIN_FRAG_THRESHOLD
||
7331 wrqu
->frag
.value
> MAX_FRAG_THRESHOLD
)
7334 priv
->ieee
->fts
= wrqu
->frag
.value
& ~0x1;
7335 priv
->frag_threshold
= priv
->ieee
->fts
;
7338 IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv
->ieee
->fts
);
7343 static int ipw2100_wx_get_frag(struct net_device
*dev
,
7344 struct iw_request_info
*info
,
7345 union iwreq_data
*wrqu
, char *extra
)
7348 * This can be called at any time. No action lock required
7351 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7352 wrqu
->frag
.value
= priv
->frag_threshold
& ~FRAG_DISABLED
;
7353 wrqu
->frag
.fixed
= 0; /* no auto select */
7354 wrqu
->frag
.disabled
= (priv
->frag_threshold
& FRAG_DISABLED
) ? 1 : 0;
7356 IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu
->frag
.value
);
7361 static int ipw2100_wx_set_retry(struct net_device
*dev
,
7362 struct iw_request_info
*info
,
7363 union iwreq_data
*wrqu
, char *extra
)
7365 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7368 if (wrqu
->retry
.flags
& IW_RETRY_LIFETIME
|| wrqu
->retry
.disabled
)
7371 if (!(wrqu
->retry
.flags
& IW_RETRY_LIMIT
))
7374 mutex_lock(&priv
->action_mutex
);
7375 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7380 if (wrqu
->retry
.flags
& IW_RETRY_SHORT
) {
7381 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7382 IPW_DEBUG_WX("SET Short Retry Limit -> %d\n",
7387 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7388 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7389 IPW_DEBUG_WX("SET Long Retry Limit -> %d\n",
7394 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7396 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7398 IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu
->retry
.value
);
7401 mutex_unlock(&priv
->action_mutex
);
7405 static int ipw2100_wx_get_retry(struct net_device
*dev
,
7406 struct iw_request_info
*info
,
7407 union iwreq_data
*wrqu
, char *extra
)
7410 * This can be called at any time. No action lock required
7413 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7415 wrqu
->retry
.disabled
= 0; /* can't be disabled */
7417 if ((wrqu
->retry
.flags
& IW_RETRY_TYPE
) == IW_RETRY_LIFETIME
)
7420 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7421 wrqu
->retry
.flags
= IW_RETRY_LIMIT
| IW_RETRY_LONG
;
7422 wrqu
->retry
.value
= priv
->long_retry_limit
;
7425 (priv
->short_retry_limit
!=
7426 priv
->long_retry_limit
) ?
7427 IW_RETRY_LIMIT
| IW_RETRY_SHORT
: IW_RETRY_LIMIT
;
7429 wrqu
->retry
.value
= priv
->short_retry_limit
;
7432 IPW_DEBUG_WX("GET Retry -> %d\n", wrqu
->retry
.value
);
7437 static int ipw2100_wx_set_scan(struct net_device
*dev
,
7438 struct iw_request_info
*info
,
7439 union iwreq_data
*wrqu
, char *extra
)
7441 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7444 mutex_lock(&priv
->action_mutex
);
7445 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7450 IPW_DEBUG_WX("Initiating scan...\n");
7452 priv
->user_requested_scan
= 1;
7453 if (ipw2100_set_scan_options(priv
) || ipw2100_start_scan(priv
)) {
7454 IPW_DEBUG_WX("Start scan failed.\n");
7456 /* TODO: Mark a scan as pending so when hardware initialized
7461 mutex_unlock(&priv
->action_mutex
);
7465 static int ipw2100_wx_get_scan(struct net_device
*dev
,
7466 struct iw_request_info
*info
,
7467 union iwreq_data
*wrqu
, char *extra
)
7470 * This can be called at any time. No action lock required
7473 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7474 return libipw_wx_get_scan(priv
->ieee
, info
, wrqu
, extra
);
7478 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7480 static int ipw2100_wx_set_encode(struct net_device
*dev
,
7481 struct iw_request_info
*info
,
7482 union iwreq_data
*wrqu
, char *key
)
7485 * No check of STATUS_INITIALIZED required
7488 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7489 return libipw_wx_set_encode(priv
->ieee
, info
, wrqu
, key
);
7492 static int ipw2100_wx_get_encode(struct net_device
*dev
,
7493 struct iw_request_info
*info
,
7494 union iwreq_data
*wrqu
, char *key
)
7497 * This can be called at any time. No action lock required
7500 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7501 return libipw_wx_get_encode(priv
->ieee
, info
, wrqu
, key
);
7504 static int ipw2100_wx_set_power(struct net_device
*dev
,
7505 struct iw_request_info
*info
,
7506 union iwreq_data
*wrqu
, char *extra
)
7508 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7511 mutex_lock(&priv
->action_mutex
);
7512 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7517 if (wrqu
->power
.disabled
) {
7518 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
7519 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
7520 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7524 switch (wrqu
->power
.flags
& IW_POWER_MODE
) {
7525 case IW_POWER_ON
: /* If not specified */
7526 case IW_POWER_MODE
: /* If set all mask */
7527 case IW_POWER_ALL_R
: /* If explicitly state all */
7529 default: /* Otherwise we don't support it */
7530 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7536 /* If the user hasn't specified a power management mode yet, default
7538 priv
->power_mode
= IPW_POWER_ENABLED
| priv
->power_mode
;
7539 err
= ipw2100_set_power_mode(priv
, IPW_POWER_LEVEL(priv
->power_mode
));
7541 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv
->power_mode
);
7544 mutex_unlock(&priv
->action_mutex
);
7549 static int ipw2100_wx_get_power(struct net_device
*dev
,
7550 struct iw_request_info
*info
,
7551 union iwreq_data
*wrqu
, char *extra
)
7554 * This can be called at any time. No action lock required
7557 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7559 if (!(priv
->power_mode
& IPW_POWER_ENABLED
))
7560 wrqu
->power
.disabled
= 1;
7562 wrqu
->power
.disabled
= 0;
7563 wrqu
->power
.flags
= 0;
7566 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv
->power_mode
);
7576 static int ipw2100_wx_set_genie(struct net_device
*dev
,
7577 struct iw_request_info
*info
,
7578 union iwreq_data
*wrqu
, char *extra
)
7581 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7582 struct libipw_device
*ieee
= priv
->ieee
;
7585 if (!ieee
->wpa_enabled
)
7588 if (wrqu
->data
.length
> MAX_WPA_IE_LEN
||
7589 (wrqu
->data
.length
&& extra
== NULL
))
7592 if (wrqu
->data
.length
) {
7593 buf
= kmemdup(extra
, wrqu
->data
.length
, GFP_KERNEL
);
7597 kfree(ieee
->wpa_ie
);
7599 ieee
->wpa_ie_len
= wrqu
->data
.length
;
7601 kfree(ieee
->wpa_ie
);
7602 ieee
->wpa_ie
= NULL
;
7603 ieee
->wpa_ie_len
= 0;
7606 ipw2100_wpa_assoc_frame(priv
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7612 static int ipw2100_wx_get_genie(struct net_device
*dev
,
7613 struct iw_request_info
*info
,
7614 union iwreq_data
*wrqu
, char *extra
)
7616 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7617 struct libipw_device
*ieee
= priv
->ieee
;
7619 if (ieee
->wpa_ie_len
== 0 || ieee
->wpa_ie
== NULL
) {
7620 wrqu
->data
.length
= 0;
7624 if (wrqu
->data
.length
< ieee
->wpa_ie_len
)
7627 wrqu
->data
.length
= ieee
->wpa_ie_len
;
7628 memcpy(extra
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7634 static int ipw2100_wx_set_auth(struct net_device
*dev
,
7635 struct iw_request_info
*info
,
7636 union iwreq_data
*wrqu
, char *extra
)
7638 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7639 struct libipw_device
*ieee
= priv
->ieee
;
7640 struct iw_param
*param
= &wrqu
->param
;
7641 struct lib80211_crypt_data
*crypt
;
7642 unsigned long flags
;
7645 switch (param
->flags
& IW_AUTH_INDEX
) {
7646 case IW_AUTH_WPA_VERSION
:
7647 case IW_AUTH_CIPHER_PAIRWISE
:
7648 case IW_AUTH_CIPHER_GROUP
:
7649 case IW_AUTH_KEY_MGMT
:
7651 * ipw2200 does not use these parameters
7655 case IW_AUTH_TKIP_COUNTERMEASURES
:
7656 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7657 if (!crypt
|| !crypt
->ops
->set_flags
|| !crypt
->ops
->get_flags
)
7660 flags
= crypt
->ops
->get_flags(crypt
->priv
);
7663 flags
|= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7665 flags
&= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7667 crypt
->ops
->set_flags(flags
, crypt
->priv
);
7671 case IW_AUTH_DROP_UNENCRYPTED
:{
7674 * wpa_supplicant calls set_wpa_enabled when the driver
7675 * is loaded and unloaded, regardless of if WPA is being
7676 * used. No other calls are made which can be used to
7677 * determine if encryption will be used or not prior to
7678 * association being expected. If encryption is not being
7679 * used, drop_unencrypted is set to false, else true -- we
7680 * can use this to determine if the CAP_PRIVACY_ON bit should
7683 struct libipw_security sec
= {
7684 .flags
= SEC_ENABLED
,
7685 .enabled
= param
->value
,
7687 priv
->ieee
->drop_unencrypted
= param
->value
;
7688 /* We only change SEC_LEVEL for open mode. Others
7689 * are set by ipw_wpa_set_encryption.
7691 if (!param
->value
) {
7692 sec
.flags
|= SEC_LEVEL
;
7693 sec
.level
= SEC_LEVEL_0
;
7695 sec
.flags
|= SEC_LEVEL
;
7696 sec
.level
= SEC_LEVEL_1
;
7698 if (priv
->ieee
->set_security
)
7699 priv
->ieee
->set_security(priv
->ieee
->dev
, &sec
);
7703 case IW_AUTH_80211_AUTH_ALG
:
7704 ret
= ipw2100_wpa_set_auth_algs(priv
, param
->value
);
7707 case IW_AUTH_WPA_ENABLED
:
7708 ret
= ipw2100_wpa_enable(priv
, param
->value
);
7711 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7712 ieee
->ieee802_1x
= param
->value
;
7715 //case IW_AUTH_ROAMING_CONTROL:
7716 case IW_AUTH_PRIVACY_INVOKED
:
7717 ieee
->privacy_invoked
= param
->value
;
7727 static int ipw2100_wx_get_auth(struct net_device
*dev
,
7728 struct iw_request_info
*info
,
7729 union iwreq_data
*wrqu
, char *extra
)
7731 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7732 struct libipw_device
*ieee
= priv
->ieee
;
7733 struct lib80211_crypt_data
*crypt
;
7734 struct iw_param
*param
= &wrqu
->param
;
7737 switch (param
->flags
& IW_AUTH_INDEX
) {
7738 case IW_AUTH_WPA_VERSION
:
7739 case IW_AUTH_CIPHER_PAIRWISE
:
7740 case IW_AUTH_CIPHER_GROUP
:
7741 case IW_AUTH_KEY_MGMT
:
7743 * wpa_supplicant will control these internally
7748 case IW_AUTH_TKIP_COUNTERMEASURES
:
7749 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7750 if (!crypt
|| !crypt
->ops
->get_flags
) {
7751 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
7752 "crypt not set!\n");
7756 param
->value
= (crypt
->ops
->get_flags(crypt
->priv
) &
7757 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
) ? 1 : 0;
7761 case IW_AUTH_DROP_UNENCRYPTED
:
7762 param
->value
= ieee
->drop_unencrypted
;
7765 case IW_AUTH_80211_AUTH_ALG
:
7766 param
->value
= priv
->ieee
->sec
.auth_mode
;
7769 case IW_AUTH_WPA_ENABLED
:
7770 param
->value
= ieee
->wpa_enabled
;
7773 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7774 param
->value
= ieee
->ieee802_1x
;
7777 case IW_AUTH_ROAMING_CONTROL
:
7778 case IW_AUTH_PRIVACY_INVOKED
:
7779 param
->value
= ieee
->privacy_invoked
;
7788 /* SIOCSIWENCODEEXT */
7789 static int ipw2100_wx_set_encodeext(struct net_device
*dev
,
7790 struct iw_request_info
*info
,
7791 union iwreq_data
*wrqu
, char *extra
)
7793 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7794 return libipw_wx_set_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7797 /* SIOCGIWENCODEEXT */
7798 static int ipw2100_wx_get_encodeext(struct net_device
*dev
,
7799 struct iw_request_info
*info
,
7800 union iwreq_data
*wrqu
, char *extra
)
7802 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7803 return libipw_wx_get_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7807 static int ipw2100_wx_set_mlme(struct net_device
*dev
,
7808 struct iw_request_info
*info
,
7809 union iwreq_data
*wrqu
, char *extra
)
7811 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7812 struct iw_mlme
*mlme
= (struct iw_mlme
*)extra
;
7815 reason
= cpu_to_le16(mlme
->reason_code
);
7817 switch (mlme
->cmd
) {
7818 case IW_MLME_DEAUTH
:
7822 case IW_MLME_DISASSOC
:
7823 ipw2100_disassociate_bssid(priv
);
7837 #ifdef CONFIG_IPW2100_MONITOR
7838 static int ipw2100_wx_set_promisc(struct net_device
*dev
,
7839 struct iw_request_info
*info
,
7840 union iwreq_data
*wrqu
, char *extra
)
7842 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7843 int *parms
= (int *)extra
;
7844 int enable
= (parms
[0] > 0);
7847 mutex_lock(&priv
->action_mutex
);
7848 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7854 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
7855 err
= ipw2100_set_channel(priv
, parms
[1], 0);
7858 priv
->channel
= parms
[1];
7859 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
7861 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
7862 err
= ipw2100_switch_mode(priv
, priv
->last_mode
);
7865 mutex_unlock(&priv
->action_mutex
);
7869 static int ipw2100_wx_reset(struct net_device
*dev
,
7870 struct iw_request_info
*info
,
7871 union iwreq_data
*wrqu
, char *extra
)
7873 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7874 if (priv
->status
& STATUS_INITIALIZED
)
7875 schedule_reset(priv
);
7881 static int ipw2100_wx_set_powermode(struct net_device
*dev
,
7882 struct iw_request_info
*info
,
7883 union iwreq_data
*wrqu
, char *extra
)
7885 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7886 int err
= 0, mode
= *(int *)extra
;
7888 mutex_lock(&priv
->action_mutex
);
7889 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7894 if ((mode
< 0) || (mode
> POWER_MODES
))
7895 mode
= IPW_POWER_AUTO
;
7897 if (IPW_POWER_LEVEL(priv
->power_mode
) != mode
)
7898 err
= ipw2100_set_power_mode(priv
, mode
);
7900 mutex_unlock(&priv
->action_mutex
);
7904 #define MAX_POWER_STRING 80
7905 static int ipw2100_wx_get_powermode(struct net_device
*dev
,
7906 struct iw_request_info
*info
,
7907 union iwreq_data
*wrqu
, char *extra
)
7910 * This can be called at any time. No action lock required
7913 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7914 int level
= IPW_POWER_LEVEL(priv
->power_mode
);
7915 s32 timeout
, period
;
7917 if (!(priv
->power_mode
& IPW_POWER_ENABLED
)) {
7918 snprintf(extra
, MAX_POWER_STRING
,
7919 "Power save level: %d (Off)", level
);
7922 case IPW_POWER_MODE_CAM
:
7923 snprintf(extra
, MAX_POWER_STRING
,
7924 "Power save level: %d (None)", level
);
7926 case IPW_POWER_AUTO
:
7927 snprintf(extra
, MAX_POWER_STRING
,
7928 "Power save level: %d (Auto)", level
);
7931 timeout
= timeout_duration
[level
- 1] / 1000;
7932 period
= period_duration
[level
- 1] / 1000;
7933 snprintf(extra
, MAX_POWER_STRING
,
7934 "Power save level: %d "
7935 "(Timeout %dms, Period %dms)",
7936 level
, timeout
, period
);
7940 wrqu
->data
.length
= strlen(extra
) + 1;
7945 static int ipw2100_wx_set_preamble(struct net_device
*dev
,
7946 struct iw_request_info
*info
,
7947 union iwreq_data
*wrqu
, char *extra
)
7949 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7950 int err
, mode
= *(int *)extra
;
7952 mutex_lock(&priv
->action_mutex
);
7953 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7959 priv
->config
|= CFG_LONG_PREAMBLE
;
7961 priv
->config
&= ~CFG_LONG_PREAMBLE
;
7967 err
= ipw2100_system_config(priv
, 0);
7970 mutex_unlock(&priv
->action_mutex
);
7974 static int ipw2100_wx_get_preamble(struct net_device
*dev
,
7975 struct iw_request_info
*info
,
7976 union iwreq_data
*wrqu
, char *extra
)
7979 * This can be called at any time. No action lock required
7982 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7984 if (priv
->config
& CFG_LONG_PREAMBLE
)
7985 snprintf(wrqu
->name
, IFNAMSIZ
, "long (1)");
7987 snprintf(wrqu
->name
, IFNAMSIZ
, "auto (0)");
7992 #ifdef CONFIG_IPW2100_MONITOR
7993 static int ipw2100_wx_set_crc_check(struct net_device
*dev
,
7994 struct iw_request_info
*info
,
7995 union iwreq_data
*wrqu
, char *extra
)
7997 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7998 int err
, mode
= *(int *)extra
;
8000 mutex_lock(&priv
->action_mutex
);
8001 if (!(priv
->status
& STATUS_INITIALIZED
)) {
8007 priv
->config
|= CFG_CRC_CHECK
;
8009 priv
->config
&= ~CFG_CRC_CHECK
;
8017 mutex_unlock(&priv
->action_mutex
);
8021 static int ipw2100_wx_get_crc_check(struct net_device
*dev
,
8022 struct iw_request_info
*info
,
8023 union iwreq_data
*wrqu
, char *extra
)
8026 * This can be called at any time. No action lock required
8029 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8031 if (priv
->config
& CFG_CRC_CHECK
)
8032 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC checked (1)");
8034 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC ignored (0)");
8038 #endif /* CONFIG_IPW2100_MONITOR */
8040 static iw_handler ipw2100_wx_handlers
[] = {
8041 IW_HANDLER(SIOCGIWNAME
, ipw2100_wx_get_name
),
8042 IW_HANDLER(SIOCSIWFREQ
, ipw2100_wx_set_freq
),
8043 IW_HANDLER(SIOCGIWFREQ
, ipw2100_wx_get_freq
),
8044 IW_HANDLER(SIOCSIWMODE
, ipw2100_wx_set_mode
),
8045 IW_HANDLER(SIOCGIWMODE
, ipw2100_wx_get_mode
),
8046 IW_HANDLER(SIOCGIWRANGE
, ipw2100_wx_get_range
),
8047 IW_HANDLER(SIOCSIWAP
, ipw2100_wx_set_wap
),
8048 IW_HANDLER(SIOCGIWAP
, ipw2100_wx_get_wap
),
8049 IW_HANDLER(SIOCSIWMLME
, ipw2100_wx_set_mlme
),
8050 IW_HANDLER(SIOCSIWSCAN
, ipw2100_wx_set_scan
),
8051 IW_HANDLER(SIOCGIWSCAN
, ipw2100_wx_get_scan
),
8052 IW_HANDLER(SIOCSIWESSID
, ipw2100_wx_set_essid
),
8053 IW_HANDLER(SIOCGIWESSID
, ipw2100_wx_get_essid
),
8054 IW_HANDLER(SIOCSIWNICKN
, ipw2100_wx_set_nick
),
8055 IW_HANDLER(SIOCGIWNICKN
, ipw2100_wx_get_nick
),
8056 IW_HANDLER(SIOCSIWRATE
, ipw2100_wx_set_rate
),
8057 IW_HANDLER(SIOCGIWRATE
, ipw2100_wx_get_rate
),
8058 IW_HANDLER(SIOCSIWRTS
, ipw2100_wx_set_rts
),
8059 IW_HANDLER(SIOCGIWRTS
, ipw2100_wx_get_rts
),
8060 IW_HANDLER(SIOCSIWFRAG
, ipw2100_wx_set_frag
),
8061 IW_HANDLER(SIOCGIWFRAG
, ipw2100_wx_get_frag
),
8062 IW_HANDLER(SIOCSIWTXPOW
, ipw2100_wx_set_txpow
),
8063 IW_HANDLER(SIOCGIWTXPOW
, ipw2100_wx_get_txpow
),
8064 IW_HANDLER(SIOCSIWRETRY
, ipw2100_wx_set_retry
),
8065 IW_HANDLER(SIOCGIWRETRY
, ipw2100_wx_get_retry
),
8066 IW_HANDLER(SIOCSIWENCODE
, ipw2100_wx_set_encode
),
8067 IW_HANDLER(SIOCGIWENCODE
, ipw2100_wx_get_encode
),
8068 IW_HANDLER(SIOCSIWPOWER
, ipw2100_wx_set_power
),
8069 IW_HANDLER(SIOCGIWPOWER
, ipw2100_wx_get_power
),
8070 IW_HANDLER(SIOCSIWGENIE
, ipw2100_wx_set_genie
),
8071 IW_HANDLER(SIOCGIWGENIE
, ipw2100_wx_get_genie
),
8072 IW_HANDLER(SIOCSIWAUTH
, ipw2100_wx_set_auth
),
8073 IW_HANDLER(SIOCGIWAUTH
, ipw2100_wx_get_auth
),
8074 IW_HANDLER(SIOCSIWENCODEEXT
, ipw2100_wx_set_encodeext
),
8075 IW_HANDLER(SIOCGIWENCODEEXT
, ipw2100_wx_get_encodeext
),
8078 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8079 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8080 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8081 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8082 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8083 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8084 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8085 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8087 static const struct iw_priv_args ipw2100_private_args
[] = {
8089 #ifdef CONFIG_IPW2100_MONITOR
8091 IPW2100_PRIV_SET_MONITOR
,
8092 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 2, 0, "monitor"},
8095 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 0, 0, "reset"},
8096 #endif /* CONFIG_IPW2100_MONITOR */
8099 IPW2100_PRIV_SET_POWER
,
8100 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_power"},
8102 IPW2100_PRIV_GET_POWER
,
8103 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| MAX_POWER_STRING
,
8106 IPW2100_PRIV_SET_LONGPREAMBLE
,
8107 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_preamble"},
8109 IPW2100_PRIV_GET_LONGPREAMBLE
,
8110 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_preamble"},
8111 #ifdef CONFIG_IPW2100_MONITOR
8113 IPW2100_PRIV_SET_CRC_CHECK
,
8114 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_crc_check"},
8116 IPW2100_PRIV_GET_CRC_CHECK
,
8117 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_crc_check"},
8118 #endif /* CONFIG_IPW2100_MONITOR */
8121 static iw_handler ipw2100_private_handler
[] = {
8122 #ifdef CONFIG_IPW2100_MONITOR
8123 ipw2100_wx_set_promisc
,
8125 #else /* CONFIG_IPW2100_MONITOR */
8128 #endif /* CONFIG_IPW2100_MONITOR */
8129 ipw2100_wx_set_powermode
,
8130 ipw2100_wx_get_powermode
,
8131 ipw2100_wx_set_preamble
,
8132 ipw2100_wx_get_preamble
,
8133 #ifdef CONFIG_IPW2100_MONITOR
8134 ipw2100_wx_set_crc_check
,
8135 ipw2100_wx_get_crc_check
,
8136 #else /* CONFIG_IPW2100_MONITOR */
8139 #endif /* CONFIG_IPW2100_MONITOR */
8143 * Get wireless statistics.
8144 * Called by /proc/net/wireless
8145 * Also called by SIOCGIWSTATS
8147 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
)
8162 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8163 struct iw_statistics
*wstats
;
8164 u32 rssi
, tx_retries
, missed_beacons
, tx_failures
;
8165 u32 ord_len
= sizeof(u32
);
8168 return (struct iw_statistics
*)NULL
;
8170 wstats
= &priv
->wstats
;
8172 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8173 * ipw2100_wx_wireless_stats seems to be called before fw is
8174 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8175 * and associated; if not associcated, the values are all meaningless
8176 * anyway, so set them all to NULL and INVALID */
8177 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8178 wstats
->miss
.beacon
= 0;
8179 wstats
->discard
.retries
= 0;
8180 wstats
->qual
.qual
= 0;
8181 wstats
->qual
.level
= 0;
8182 wstats
->qual
.noise
= 0;
8183 wstats
->qual
.updated
= 7;
8184 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
|
8185 IW_QUAL_QUAL_INVALID
| IW_QUAL_LEVEL_INVALID
;
8189 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_MISSED_BCNS
,
8190 &missed_beacons
, &ord_len
))
8191 goto fail_get_ordinal
;
8193 /* If we don't have a connection the quality and level is 0 */
8194 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8195 wstats
->qual
.qual
= 0;
8196 wstats
->qual
.level
= 0;
8198 if (ipw2100_get_ordinal(priv
, IPW_ORD_RSSI_AVG_CURR
,
8200 goto fail_get_ordinal
;
8201 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8203 rssi_qual
= rssi
* POOR
/ 10;
8205 rssi_qual
= (rssi
- 10) * (FAIR
- POOR
) / 5 + POOR
;
8207 rssi_qual
= (rssi
- 15) * (GOOD
- FAIR
) / 5 + FAIR
;
8209 rssi_qual
= (rssi
- 20) * (VERY_GOOD
- GOOD
) /
8212 rssi_qual
= (rssi
- 30) * (PERFECT
- VERY_GOOD
) /
8215 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_RETRIES
,
8216 &tx_retries
, &ord_len
))
8217 goto fail_get_ordinal
;
8219 if (tx_retries
> 75)
8220 tx_qual
= (90 - tx_retries
) * POOR
/ 15;
8221 else if (tx_retries
> 70)
8222 tx_qual
= (75 - tx_retries
) * (FAIR
- POOR
) / 5 + POOR
;
8223 else if (tx_retries
> 65)
8224 tx_qual
= (70 - tx_retries
) * (GOOD
- FAIR
) / 5 + FAIR
;
8225 else if (tx_retries
> 50)
8226 tx_qual
= (65 - tx_retries
) * (VERY_GOOD
- GOOD
) /
8229 tx_qual
= (50 - tx_retries
) *
8230 (PERFECT
- VERY_GOOD
) / 50 + VERY_GOOD
;
8232 if (missed_beacons
> 50)
8233 beacon_qual
= (60 - missed_beacons
) * POOR
/ 10;
8234 else if (missed_beacons
> 40)
8235 beacon_qual
= (50 - missed_beacons
) * (FAIR
- POOR
) /
8237 else if (missed_beacons
> 32)
8238 beacon_qual
= (40 - missed_beacons
) * (GOOD
- FAIR
) /
8240 else if (missed_beacons
> 20)
8241 beacon_qual
= (32 - missed_beacons
) *
8242 (VERY_GOOD
- GOOD
) / 20 + GOOD
;
8244 beacon_qual
= (20 - missed_beacons
) *
8245 (PERFECT
- VERY_GOOD
) / 20 + VERY_GOOD
;
8247 quality
= min(tx_qual
, rssi_qual
);
8248 quality
= min(beacon_qual
, quality
);
8250 #ifdef CONFIG_IPW2100_DEBUG
8251 if (beacon_qual
== quality
)
8252 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8253 else if (tx_qual
== quality
)
8254 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8255 else if (quality
!= 100)
8256 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8258 IPW_DEBUG_WX("Quality not clamped.\n");
8261 wstats
->qual
.qual
= quality
;
8262 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8265 wstats
->qual
.noise
= 0;
8266 wstats
->qual
.updated
= 7;
8267 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
;
8269 /* FIXME: this is percent and not a # */
8270 wstats
->miss
.beacon
= missed_beacons
;
8272 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_TX_FAILURES
,
8273 &tx_failures
, &ord_len
))
8274 goto fail_get_ordinal
;
8275 wstats
->discard
.retries
= tx_failures
;
8280 IPW_DEBUG_WX("failed querying ordinals.\n");
8282 return (struct iw_statistics
*)NULL
;
8285 static struct iw_handler_def ipw2100_wx_handler_def
= {
8286 .standard
= ipw2100_wx_handlers
,
8287 .num_standard
= ARRAY_SIZE(ipw2100_wx_handlers
),
8288 .num_private
= ARRAY_SIZE(ipw2100_private_handler
),
8289 .num_private_args
= ARRAY_SIZE(ipw2100_private_args
),
8290 .private = (iw_handler
*) ipw2100_private_handler
,
8291 .private_args
= (struct iw_priv_args
*)ipw2100_private_args
,
8292 .get_wireless_stats
= ipw2100_wx_wireless_stats
,
8295 static void ipw2100_wx_event_work(struct work_struct
*work
)
8297 struct ipw2100_priv
*priv
=
8298 container_of(work
, struct ipw2100_priv
, wx_event_work
.work
);
8299 union iwreq_data wrqu
;
8300 unsigned int len
= ETH_ALEN
;
8302 if (priv
->status
& STATUS_STOPPING
)
8305 mutex_lock(&priv
->action_mutex
);
8307 IPW_DEBUG_WX("enter\n");
8309 mutex_unlock(&priv
->action_mutex
);
8311 wrqu
.ap_addr
.sa_family
= ARPHRD_ETHER
;
8313 /* Fetch BSSID from the hardware */
8314 if (!(priv
->status
& (STATUS_ASSOCIATING
| STATUS_ASSOCIATED
)) ||
8315 priv
->status
& STATUS_RF_KILL_MASK
||
8316 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
8317 &priv
->bssid
, &len
)) {
8318 memset(wrqu
.ap_addr
.sa_data
, 0, ETH_ALEN
);
8320 /* We now have the BSSID, so can finish setting to the full
8321 * associated state */
8322 memcpy(wrqu
.ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
8323 memcpy(priv
->ieee
->bssid
, priv
->bssid
, ETH_ALEN
);
8324 priv
->status
&= ~STATUS_ASSOCIATING
;
8325 priv
->status
|= STATUS_ASSOCIATED
;
8326 netif_carrier_on(priv
->net_dev
);
8327 netif_wake_queue(priv
->net_dev
);
8330 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8331 IPW_DEBUG_WX("Configuring ESSID\n");
8332 mutex_lock(&priv
->action_mutex
);
8333 /* This is a disassociation event, so kick the firmware to
8334 * look for another AP */
8335 if (priv
->config
& CFG_STATIC_ESSID
)
8336 ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
8339 ipw2100_set_essid(priv
, NULL
, 0, 0);
8340 mutex_unlock(&priv
->action_mutex
);
8343 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
8346 #define IPW2100_FW_MAJOR_VERSION 1
8347 #define IPW2100_FW_MINOR_VERSION 3
8349 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8350 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8352 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8353 IPW2100_FW_MAJOR_VERSION)
8355 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8356 "." __stringify(IPW2100_FW_MINOR_VERSION)
8358 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8362 BINARY FIRMWARE HEADER FORMAT
8366 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8369 C fw_len firmware data
8370 12 + fw_len uc_len microcode data
8374 struct ipw2100_fw_header
{
8377 unsigned int fw_size
;
8378 unsigned int uc_size
;
8381 static int ipw2100_mod_firmware_load(struct ipw2100_fw
*fw
)
8383 struct ipw2100_fw_header
*h
=
8384 (struct ipw2100_fw_header
*)fw
->fw_entry
->data
;
8386 if (IPW2100_FW_MAJOR(h
->version
) != IPW2100_FW_MAJOR_VERSION
) {
8387 printk(KERN_WARNING DRV_NAME
": Firmware image not compatible "
8388 "(detected version id of %u). "
8389 "See Documentation/networking/README.ipw2100\n",
8394 fw
->version
= h
->version
;
8395 fw
->fw
.data
= fw
->fw_entry
->data
+ sizeof(struct ipw2100_fw_header
);
8396 fw
->fw
.size
= h
->fw_size
;
8397 fw
->uc
.data
= fw
->fw
.data
+ h
->fw_size
;
8398 fw
->uc
.size
= h
->uc_size
;
8403 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
8404 struct ipw2100_fw
*fw
)
8409 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8410 priv
->net_dev
->name
);
8412 switch (priv
->ieee
->iw_mode
) {
8414 fw_name
= IPW2100_FW_NAME("-i");
8416 #ifdef CONFIG_IPW2100_MONITOR
8417 case IW_MODE_MONITOR
:
8418 fw_name
= IPW2100_FW_NAME("-p");
8423 fw_name
= IPW2100_FW_NAME("");
8427 rc
= request_firmware(&fw
->fw_entry
, fw_name
, &priv
->pci_dev
->dev
);
8430 printk(KERN_ERR DRV_NAME
": "
8431 "%s: Firmware '%s' not available or load failed.\n",
8432 priv
->net_dev
->name
, fw_name
);
8435 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw
->fw_entry
->data
,
8436 fw
->fw_entry
->size
);
8438 ipw2100_mod_firmware_load(fw
);
8443 MODULE_FIRMWARE(IPW2100_FW_NAME("-i"));
8444 #ifdef CONFIG_IPW2100_MONITOR
8445 MODULE_FIRMWARE(IPW2100_FW_NAME("-p"));
8447 MODULE_FIRMWARE(IPW2100_FW_NAME(""));
8449 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
8450 struct ipw2100_fw
*fw
)
8453 release_firmware(fw
->fw_entry
);
8454 fw
->fw_entry
= NULL
;
8457 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
8460 char ver
[MAX_FW_VERSION_LEN
];
8461 u32 len
= MAX_FW_VERSION_LEN
;
8464 /* firmware version is an ascii string (max len of 14) */
8465 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_FW_VER_NUM
, ver
, &len
))
8470 for (i
= 0; i
< len
; i
++)
8476 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
8480 u32 len
= sizeof(ver
);
8481 /* microcode version is a 32 bit integer */
8482 if (ipw2100_get_ordinal(priv
, IPW_ORD_UCODE_VERSION
, &ver
, &len
))
8484 return snprintf(buf
, max
, "%08X", ver
);
8488 * On exit, the firmware will have been freed from the fw list
8490 static int ipw2100_fw_download(struct ipw2100_priv
*priv
, struct ipw2100_fw
*fw
)
8492 /* firmware is constructed of N contiguous entries, each entry is
8496 * 0 4 address to write to
8497 * 4 2 length of data run
8503 const unsigned char *firmware_data
= fw
->fw
.data
;
8504 unsigned int firmware_data_left
= fw
->fw
.size
;
8506 while (firmware_data_left
> 0) {
8507 addr
= *(u32
*) (firmware_data
);
8509 firmware_data_left
-= 4;
8511 len
= *(u16
*) (firmware_data
);
8513 firmware_data_left
-= 2;
8516 printk(KERN_ERR DRV_NAME
": "
8517 "Invalid firmware run-length of %d bytes\n",
8522 write_nic_memory(priv
->net_dev
, addr
, len
, firmware_data
);
8523 firmware_data
+= len
;
8524 firmware_data_left
-= len
;
8530 struct symbol_alive_response
{
8539 u16 clock_settle_time
; // 1us LSB
8540 u16 powerup_settle_time
; // 1us LSB
8541 u16 hop_settle_time
; // 1us LSB
8542 u8 date
[3]; // month, day, year
8543 u8 time
[2]; // hours, minutes
8547 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
8548 struct ipw2100_fw
*fw
)
8550 struct net_device
*dev
= priv
->net_dev
;
8551 const unsigned char *microcode_data
= fw
->uc
.data
;
8552 unsigned int microcode_data_left
= fw
->uc
.size
;
8553 void __iomem
*reg
= priv
->ioaddr
;
8555 struct symbol_alive_response response
;
8559 /* Symbol control */
8560 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8562 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8566 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8568 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8571 /* EN_CS_ACCESS bit to reset control store pointer */
8572 write_nic_byte(dev
, 0x210000, 0x40);
8574 write_nic_byte(dev
, 0x210000, 0x0);
8576 write_nic_byte(dev
, 0x210000, 0x40);
8579 /* copy microcode from buffer into Symbol */
8581 while (microcode_data_left
> 0) {
8582 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8583 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8584 microcode_data_left
-= 2;
8587 /* EN_CS_ACCESS bit to reset the control store pointer */
8588 write_nic_byte(dev
, 0x210000, 0x0);
8591 /* Enable System (Reg 0)
8592 * first enable causes garbage in RX FIFO */
8593 write_nic_byte(dev
, 0x210000, 0x0);
8595 write_nic_byte(dev
, 0x210000, 0x80);
8598 /* Reset External Baseband Reg */
8599 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8601 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8604 /* HW Config (Reg 5) */
8605 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8607 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8610 /* Enable System (Reg 0)
8611 * second enable should be OK */
8612 write_nic_byte(dev
, 0x210000, 0x00); // clear enable system
8614 write_nic_byte(dev
, 0x210000, 0x80); // set enable system
8616 /* check Symbol is enabled - upped this from 5 as it wasn't always
8617 * catching the update */
8618 for (i
= 0; i
< 10; i
++) {
8621 /* check Dino is enabled bit */
8622 read_nic_byte(dev
, 0x210000, &data
);
8628 printk(KERN_ERR DRV_NAME
": %s: Error initializing Symbol\n",
8633 /* Get Symbol alive response */
8634 for (i
= 0; i
< 30; i
++) {
8635 /* Read alive response structure */
8637 j
< (sizeof(struct symbol_alive_response
) >> 1); j
++)
8638 read_nic_word(dev
, 0x210004, ((u16
*) & response
) + j
);
8640 if ((response
.cmd_id
== 1) && (response
.ucode_valid
== 0x1))
8646 printk(KERN_ERR DRV_NAME
8647 ": %s: No response from Symbol - hw not alive\n",
8649 printk_buf(IPW_DL_ERROR
, (u8
*) & response
, sizeof(response
));