drivers/net/wireless/rtlwifi/rtl8188ee/sw.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2009-2013  Realtek Corporation.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * The full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  * wlanfae <wlanfae@realtek.com>
  23  * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
  24  * Hsinchu 300, Taiwan.
  25  *
  26  * Larry Finger <Larry.Finger@lwfinger.net>
  27  *
  28  *****************************************************************************/
  29
  30 #include "../wifi.h"
  31 #include "../core.h"
  32 #include "../pci.h"
  33 #include "reg.h"
  34 #include "def.h"
  35 #include "phy.h"
  36 #include "dm.h"
  37 #include "hw.h"
  38 #include "sw.h"
  39 #include "trx.h"
  40 #include "led.h"
  41 #include "table.h"
  42
  43 #include <linux/vmalloc.h>
  44 #include <linux/module.h>
  45
  46 static void rtl88e_init_aspm_vars(struct ieee80211_hw *hw)
  47 {
  48         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
  49
  50         /*close ASPM for AMD defaultly */
  51         rtlpci->const_amdpci_aspm = 0;
  52
  53         /* ASPM PS mode.
  54          * 0 - Disable ASPM,
  55          * 1 - Enable ASPM without Clock Req,
  56          * 2 - Enable ASPM with Clock Req,
  57          * 3 - Alwyas Enable ASPM with Clock Req,
  58          * 4 - Always Enable ASPM without Clock Req.
  59          * set defult to RTL8192CE:3 RTL8192E:2
  60          */
  61         rtlpci->const_pci_aspm = 3;
  62
  63         /*Setting for PCI-E device */
  64         rtlpci->const_devicepci_aspm_setting = 0x03;
  65
  66         /*Setting for PCI-E bridge */
  67         rtlpci->const_hostpci_aspm_setting = 0x02;
  68
  69         /* In Hw/Sw Radio Off situation.
  70          * 0 - Default,
  71          * 1 - From ASPM setting without low Mac Pwr,
  72          * 2 - From ASPM setting with low Mac Pwr,
  73          * 3 - Bus D3
  74          * set default to RTL8192CE:0 RTL8192SE:2
  75          */
  76         rtlpci->const_hwsw_rfoff_d3 = 0;
  77
  78         /* This setting works for those device with
  79          * backdoor ASPM setting such as EPHY setting.
  80          * 0 - Not support ASPM,
  81          * 1 - Support ASPM,
  82          * 2 - According to chipset.
  83          */
  84         rtlpci->const_support_pciaspm = 1;
  85 }
  86
  87 int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
  88 {
  89         int err = 0;
  90         struct rtl_priv *rtlpriv = rtl_priv(hw);
  91         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
  92         u8 tid;
  93
  94         rtl8188ee_bt_reg_init(hw);
  95
  96         rtlpriv->dm.dm_initialgain_enable = 1;
  97         rtlpriv->dm.dm_flag = 0;
  98         rtlpriv->dm.disable_framebursting = 0;
  99         rtlpriv->dm.thermalvalue = 0;
 100         rtlpci->transmit_config = CFENDFORM | BIT(15);
 101
 102         /* compatible 5G band 88ce just 2.4G band & smsp */
 103         rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G;
 104         rtlpriv->rtlhal.bandset = BAND_ON_2_4G;
 105         rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY;
 106
 107         rtlpci->receive_config = (RCR_APPFCS |
 108                                   RCR_APP_MIC |
 109                                   RCR_APP_ICV |
 110                                   RCR_APP_PHYST_RXFF |
 111                                   RCR_HTC_LOC_CTRL |
 112                                   RCR_AMF |
 113                                   RCR_ACF |
 114                                   RCR_ADF |
 115                                   RCR_AICV |
 116                                   RCR_ACRC32 |
 117                                   RCR_AB |
 118                                   RCR_AM |
 119                                   RCR_APM |
 120                                   0);
 121
 122         rtlpci->irq_mask[0] =
 123                                 (u32) (IMR_PSTIMEOUT    |
 124                                 IMR_HSISR_IND_ON_INT    |
 125                                 IMR_C2HCMD              |
 126                                 IMR_HIGHDOK             |
 127                                 IMR_MGNTDOK             |
 128                                 IMR_BKDOK               |
 129                                 IMR_BEDOK               |
 130                                 IMR_VIDOK               |
 131                                 IMR_VODOK               |
 132                                 IMR_RDU                 |
 133                                 IMR_ROK                 |
 134                                 0);
 135         rtlpci->irq_mask[1] = (u32) (IMR_RXFOVW | 0);
 136         rtlpci->sys_irq_mask = (u32) (HSIMR_PDN_INT_EN | HSIMR_RON_INT_EN);
 137
 138         /* for debug level */
 139         rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
 140         /* for LPS & IPS */
 141         rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
 142         rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
 143         rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
 144         if (!rtlpriv->psc.inactiveps)
 145                 pr_info("rtl8188ee: Power Save off (module option)\n");
 146         if (!rtlpriv->psc.fwctrl_lps)
 147                 pr_info("rtl8188ee: FW Power Save off (module option)\n");
 148         rtlpriv->psc.reg_fwctrl_lps = 3;
 149         rtlpriv->psc.reg_max_lps_awakeintvl = 5;
 150         /* for ASPM, you can close aspm through
 151          * set const_support_pciaspm = 0
 152          */
 153         rtl88e_init_aspm_vars(hw);
 154
 155         if (rtlpriv->psc.reg_fwctrl_lps == 1)
 156                 rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
 157         else if (rtlpriv->psc.reg_fwctrl_lps == 2)
 158                 rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
 159         else if (rtlpriv->psc.reg_fwctrl_lps == 3)
 160                 rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
 161
 162         /* for firmware buf */
 163         rtlpriv->rtlhal.pfirmware = vmalloc(0x8000);
 164         if (!rtlpriv->rtlhal.pfirmware) {
 165                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 166                          "Can't alloc buffer for fw.\n");
 167                 return 1;
 168         }
 169
 170         rtlpriv->cfg->fw_name = "rtlwifi/rtl8188efw.bin";
 171         rtlpriv->max_fw_size = 0x8000;
 172         pr_info("Using firmware %s\n", rtlpriv->cfg->fw_name);
 173         err = request_firmware_nowait(THIS_MODULE, 1, rtlpriv->cfg->fw_name,
 174                                       rtlpriv->io.dev, GFP_KERNEL, hw,
 175                                       rtl_fw_cb);
 176         if (err) {
 177                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 178                          "Failed to request firmware!\n");
 179                 return 1;
 180         }
 181
 182         /* for early mode */
 183         rtlpriv->rtlhal.earlymode_enable = false;
 184         rtlpriv->rtlhal.max_earlymode_num = 10;
 185         for (tid = 0; tid < 8; tid++)
 186                 skb_queue_head_init(&rtlpriv->mac80211.skb_waitq[tid]);
 187
 188         /*low power */
 189         rtlpriv->psc.low_power_enable = false;
 190         if (rtlpriv->psc.low_power_enable) {
 191                 init_timer(&rtlpriv->works.fw_clockoff_timer);
 192                 setup_timer(&rtlpriv->works.fw_clockoff_timer,
 193                             rtl88ee_fw_clk_off_timer_callback,
 194                             (unsigned long)hw);
 195         }
 196
 197         init_timer(&rtlpriv->works.fast_antenna_training_timer);
 198         setup_timer(&rtlpriv->works.fast_antenna_training_timer,
 199                     rtl88e_dm_fast_antenna_training_callback,
 200                     (unsigned long)hw);
 201         return err;
 202 }
 203
 204 void rtl88e_deinit_sw_vars(struct ieee80211_hw *hw)
 205 {
 206         struct rtl_priv *rtlpriv = rtl_priv(hw);
 207
 208         if (rtlpriv->rtlhal.pfirmware) {
 209                 vfree(rtlpriv->rtlhal.pfirmware);
 210                 rtlpriv->rtlhal.pfirmware = NULL;
 211         }
 212
 213         if (rtlpriv->psc.low_power_enable)
 214                 del_timer_sync(&rtlpriv->works.fw_clockoff_timer);
 215
 216         del_timer_sync(&rtlpriv->works.fast_antenna_training_timer);
 217 }
 218
 219 static struct rtl_hal_ops rtl8188ee_hal_ops = {
 220         .init_sw_vars = rtl88e_init_sw_vars,
 221         .deinit_sw_vars = rtl88e_deinit_sw_vars,
 222         .read_eeprom_info = rtl88ee_read_eeprom_info,
 223         .interrupt_recognized = rtl88ee_interrupt_recognized,/*need check*/
 224         .hw_init = rtl88ee_hw_init,
 225         .hw_disable = rtl88ee_card_disable,
 226         .hw_suspend = rtl88ee_suspend,
 227         .hw_resume = rtl88ee_resume,
 228         .enable_interrupt = rtl88ee_enable_interrupt,
 229         .disable_interrupt = rtl88ee_disable_interrupt,
 230         .set_network_type = rtl88ee_set_network_type,
 231         .set_chk_bssid = rtl88ee_set_check_bssid,
 232         .set_qos = rtl88ee_set_qos,
 233         .set_bcn_reg = rtl88ee_set_beacon_related_registers,
 234         .set_bcn_intv = rtl88ee_set_beacon_interval,
 235         .update_interrupt_mask = rtl88ee_update_interrupt_mask,
 236         .get_hw_reg = rtl88ee_get_hw_reg,
 237         .set_hw_reg = rtl88ee_set_hw_reg,
 238         .update_rate_tbl = rtl88ee_update_hal_rate_tbl,
 239         .fill_tx_desc = rtl88ee_tx_fill_desc,
 240         .fill_tx_cmddesc = rtl88ee_tx_fill_cmddesc,
 241         .query_rx_desc = rtl88ee_rx_query_desc,
 242         .set_channel_access = rtl88ee_update_channel_access_setting,
 243         .radio_onoff_checking = rtl88ee_gpio_radio_on_off_checking,
 244         .set_bw_mode = rtl88e_phy_set_bw_mode,
 245         .switch_channel = rtl88e_phy_sw_chnl,
 246         .dm_watchdog = rtl88e_dm_watchdog,
 247         .scan_operation_backup = rtl88e_phy_scan_operation_backup,
 248         .set_rf_power_state = rtl88e_phy_set_rf_power_state,
 249         .led_control = rtl88ee_led_control,
 250         .set_desc = rtl88ee_set_desc,
 251         .get_desc = rtl88ee_get_desc,
 252         .tx_polling = rtl88ee_tx_polling,
 253         .enable_hw_sec = rtl88ee_enable_hw_security_config,
 254         .set_key = rtl88ee_set_key,
 255         .init_sw_leds = rtl88ee_init_sw_leds,
 256         .allow_all_destaddr = rtl88ee_allow_all_destaddr,
 257         .get_bbreg = rtl88e_phy_query_bb_reg,
 258         .set_bbreg = rtl88e_phy_set_bb_reg,
 259         .get_rfreg = rtl88e_phy_query_rf_reg,
 260         .set_rfreg = rtl88e_phy_set_rf_reg,
 261 };
 262
 263 static struct rtl_mod_params rtl88ee_mod_params = {
 264         .sw_crypto = false,
 265         .inactiveps = true,
 266         .swctrl_lps = false,
 267         .fwctrl_lps = true,
 268         .debug = DBG_EMERG,
 269 };
 270
 271 static struct rtl_hal_cfg rtl88ee_hal_cfg = {
 272         .bar_id = 2,
 273         .write_readback = true,
 274         .name = "rtl88e_pci",
 275         .ops = &rtl8188ee_hal_ops,
 276         .mod_params = &rtl88ee_mod_params,
 277
 278         .maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
 279         .maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
 280         .maps[SYS_CLK] = REG_SYS_CLKR,
 281         .maps[MAC_RCR_AM] = AM,
 282         .maps[MAC_RCR_AB] = AB,
 283         .maps[MAC_RCR_ACRC32] = ACRC32,
 284         .maps[MAC_RCR_ACF] = ACF,
 285         .maps[MAC_RCR_AAP] = AAP,
 286
 287         .maps[EFUSE_ACCESS] = REG_EFUSE_ACCESS,
 288
 289         .maps[EFUSE_TEST] = REG_EFUSE_TEST,
 290         .maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
 291         .maps[EFUSE_CLK] = 0,
 292         .maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
 293         .maps[EFUSE_PWC_EV12V] = PWC_EV12V,
 294         .maps[EFUSE_FEN_ELDR] = FEN_ELDR,
 295         .maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN,
 296         .maps[EFUSE_ANA8M] = ANA8M,
 297         .maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE,
 298         .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
 299         .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
 300         .maps[EFUSE_OOB_PROTECT_BYTES_LEN] = EFUSE_OOB_PROTECT_BYTES,
 301
 302         .maps[RWCAM] = REG_CAMCMD,
 303         .maps[WCAMI] = REG_CAMWRITE,
 304         .maps[RCAMO] = REG_CAMREAD,
 305         .maps[CAMDBG] = REG_CAMDBG,
 306         .maps[SECR] = REG_SECCFG,
 307         .maps[SEC_CAM_NONE] = CAM_NONE,
 308         .maps[SEC_CAM_WEP40] = CAM_WEP40,
 309         .maps[SEC_CAM_TKIP] = CAM_TKIP,
 310         .maps[SEC_CAM_AES] = CAM_AES,
 311         .maps[SEC_CAM_WEP104] = CAM_WEP104,
 312
 313         .maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
 314         .maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
 315         .maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
 316         .maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
 317         .maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
 318         .maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
 319 /*      .maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,     */   /*need check*/
 320         .maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
 321         .maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
 322         .maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
 323         .maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
 324         .maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
 325         .maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
 326         .maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
 327 /*      .maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,*/
 328 /*      .maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,*/
 329
 330         .maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
 331         .maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
 332         .maps[RTL_IMR_BCNINT] = IMR_BCNDMAINT0,
 333         .maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
 334         .maps[RTL_IMR_RDU] = IMR_RDU,
 335         .maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
 336         .maps[RTL_IMR_BDOK] = IMR_BCNDOK0,
 337         .maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
 338         .maps[RTL_IMR_TBDER] = IMR_TBDER,
 339         .maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
 340         .maps[RTL_IMR_TBDOK] = IMR_TBDOK,
 341         .maps[RTL_IMR_BKDOK] = IMR_BKDOK,
 342         .maps[RTL_IMR_BEDOK] = IMR_BEDOK,
 343         .maps[RTL_IMR_VIDOK] = IMR_VIDOK,
 344         .maps[RTL_IMR_VODOK] = IMR_VODOK,
 345         .maps[RTL_IMR_ROK] = IMR_ROK,
 346         .maps[RTL_IBSS_INT_MASKS] = (IMR_BCNDMAINT0 | IMR_TBDOK | IMR_TBDER),
 347
 348         .maps[RTL_RC_CCK_RATE1M] = DESC92C_RATE1M,
 349         .maps[RTL_RC_CCK_RATE2M] = DESC92C_RATE2M,
 350         .maps[RTL_RC_CCK_RATE5_5M] = DESC92C_RATE5_5M,
 351         .maps[RTL_RC_CCK_RATE11M] = DESC92C_RATE11M,
 352         .maps[RTL_RC_OFDM_RATE6M] = DESC92C_RATE6M,
 353         .maps[RTL_RC_OFDM_RATE9M] = DESC92C_RATE9M,
 354         .maps[RTL_RC_OFDM_RATE12M] = DESC92C_RATE12M,
 355         .maps[RTL_RC_OFDM_RATE18M] = DESC92C_RATE18M,
 356         .maps[RTL_RC_OFDM_RATE24M] = DESC92C_RATE24M,
 357         .maps[RTL_RC_OFDM_RATE36M] = DESC92C_RATE36M,
 358         .maps[RTL_RC_OFDM_RATE48M] = DESC92C_RATE48M,
 359         .maps[RTL_RC_OFDM_RATE54M] = DESC92C_RATE54M,
 360
 361         .maps[RTL_RC_HT_RATEMCS7] = DESC92C_RATEMCS7,
 362         .maps[RTL_RC_HT_RATEMCS15] = DESC92C_RATEMCS15,
 363 };
 364
 365 static DEFINE_PCI_DEVICE_TABLE(rtl88ee_pci_ids) = {
 366         {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8179, rtl88ee_hal_cfg)},
 367         {},
 368 };
 369
 370 MODULE_DEVICE_TABLE(pci, rtl88ee_pci_ids);
 371
 372 MODULE_AUTHOR("zhiyuan_yang     <zhiyuan_yang@realsil.com.cn>");
 373 MODULE_AUTHOR("Realtek WlanFAE  <wlanfae@realtek.com>");
 374 MODULE_AUTHOR("Larry Finger     <Larry.Finger@lwfinger.net>");
 375 MODULE_LICENSE("GPL");
 376 MODULE_DESCRIPTION("Realtek 8188E 802.11n PCI wireless");
 377 MODULE_FIRMWARE("rtlwifi/rtl8188efw.bin");
 378
 379 module_param_named(swenc, rtl88ee_mod_params.sw_crypto, bool, 0444);
 380 module_param_named(debug, rtl88ee_mod_params.debug, int, 0444);
 381 module_param_named(ips, rtl88ee_mod_params.inactiveps, bool, 0444);
 382 module_param_named(swlps, rtl88ee_mod_params.swctrl_lps, bool, 0444);
 383 module_param_named(fwlps, rtl88ee_mod_params.fwctrl_lps, bool, 0444);
 384 MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
 385 MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
 386 MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
 387 MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
 388 MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
 389
 390 static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
 391
 392 static struct pci_driver rtl88ee_driver = {
 393         .name = KBUILD_MODNAME,
 394         .id_table = rtl88ee_pci_ids,
 395         .probe = rtl_pci_probe,
 396         .remove = rtl_pci_disconnect,
 397         .driver.pm = &rtlwifi_pm_ops,
 398 };
 399
 400 module_pci_driver(rtl88ee_driver);