drivers/staging/dwc2/pci.c

   1 /*
   2  * pci.c - DesignWare HS OTG Controller PCI driver
   3  *
   4  * Copyright (C) 2004-2013 Synopsys, Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions
   8  * are met:
   9  * 1. Redistributions of source code must retain the above copyright
  10  *    notice, this list of conditions, and the following disclaimer,
  11  *    without modification.
  12  * 2. Redistributions in binary form must reproduce the above copyright
  13  *    notice, this list of conditions and the following disclaimer in the
  14  *    documentation and/or other materials provided with the distribution.
  15  * 3. The names of the above-listed copyright holders may not be used
  16  *    to endorse or promote products derived from this software without
  17  *    specific prior written permission.
  18  *
  19  * ALTERNATIVELY, this software may be distributed under the terms of the
  20  * GNU General Public License ("GPL") as published by the Free Software
  21  * Foundation; either version 2 of the License, or (at your option) any
  22  * later version.
  23  *
  24  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
  25  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
  26  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  27  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
  28  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
  29  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
  30  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
  31  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
  32  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  33  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  34  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  35  */
  36
  37 /*
  38  * Provides the initialization and cleanup entry points for the DWC_otg PCI
  39  * driver
  40  */
  41 #include <linux/kernel.h>
  42 #include <linux/module.h>
  43 #include <linux/moduleparam.h>
  44 #include <linux/spinlock.h>
  45 #include <linux/interrupt.h>
  46 #include <linux/io.h>
  47 #include <linux/slab.h>
  48 #include <linux/pci.h>
  49 #include <linux/usb.h>
  50
  51 #include <linux/usb/hcd.h>
  52 #include <linux/usb/ch11.h>
  53
  54 #include "core.h"
  55 #include "hcd.h"
  56
  57 #define PCI_VENDOR_ID_SYNOPSYS          0x16c3
  58 #define PCI_PRODUCT_ID_HAPS_HSOTG       0xabc0
  59
  60 static const char dwc2_driver_name[] = "dwc2";
  61
  62 static const struct dwc2_core_params dwc2_module_params = {
  63         .otg_cap                        = -1,
  64         .otg_ver                        = -1,
  65         .dma_enable                     = -1,
  66         .dma_desc_enable                = 0,
  67         .speed                          = -1,
  68         .enable_dynamic_fifo            = -1,
  69         .en_multiple_tx_fifo            = -1,
  70         .host_rx_fifo_size              = 1024,
  71         .host_nperio_tx_fifo_size       = 256,
  72         .host_perio_tx_fifo_size        = 1024,
  73         .max_transfer_size              = 65535,
  74         .max_packet_count               = 511,
  75         .host_channels                  = -1,
  76         .phy_type                       = -1,
  77         .phy_utmi_width                 = -1,
  78         .phy_ulpi_ddr                   = -1,
  79         .phy_ulpi_ext_vbus              = -1,
  80         .i2c_enable                     = -1,
  81         .ulpi_fs_ls                     = -1,
  82         .host_support_fs_ls_low_power   = -1,
  83         .host_ls_low_power_phy_clk      = -1,
  84         .ts_dline                       = -1,
  85         .reload_ctl                     = -1,
  86         .ahbcfg                         = -1,
  87 };
  88
  89 /**
  90  * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
  91  * DWC_otg driver
  92  *
  93  * @dev: Bus device
  94  *
  95  * This routine is called, for example, when the rmmod command is executed. The
  96  * device may or may not be electrically present. If it is present, the driver
  97  * stops device processing. Any resources used on behalf of this device are
  98  * freed.
  99  */
 100 static void dwc2_driver_remove(struct pci_dev *dev)
 101 {
 102         struct dwc2_hsotg *hsotg = pci_get_drvdata(dev);
 103
 104         dwc2_hcd_remove(hsotg);
 105         pci_disable_device(dev);
 106 }
 107
 108 /**
 109  * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
 110  * driver
 111  *
 112  * @dev: Bus device
 113  *
 114  * This routine creates the driver components required to control the device
 115  * (core, HCD, and PCD) and initializes the device. The driver components are
 116  * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
 117  * in the device private data. This allows the driver to access the dwc2_hsotg
 118  * structure on subsequent calls to driver methods for this device.
 119  */
 120 static int dwc2_driver_probe(struct pci_dev *dev,
 121                              const struct pci_device_id *id)
 122 {
 123         struct dwc2_hsotg *hsotg;
 124         int retval;
 125
 126         hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
 127         if (!hsotg)
 128                 return -ENOMEM;
 129
 130         hsotg->dev = &dev->dev;
 131         hsotg->regs = devm_ioremap_resource(&dev->dev, &dev->resource[0]);
 132         if (IS_ERR(hsotg->regs))
 133                 return PTR_ERR(hsotg->regs);
 134
 135         dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
 136                 (unsigned long)pci_resource_start(dev, 0), hsotg->regs);
 137
 138         if (pci_enable_device(dev) < 0)
 139                 return -ENODEV;
 140
 141         pci_set_master(dev);
 142
 143         retval = dwc2_hcd_init(hsotg, dev->irq, &dwc2_module_params);
 144         if (retval) {
 145                 pci_disable_device(dev);
 146                 return retval;
 147         }
 148
 149         pci_set_drvdata(dev, hsotg);
 150
 151         return retval;
 152 }
 153
 154 static DEFINE_PCI_DEVICE_TABLE(dwc2_pci_ids) = {
 155         {
 156                 PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_PRODUCT_ID_HAPS_HSOTG),
 157         },
 158         {
 159                 PCI_DEVICE(PCI_VENDOR_ID_STMICRO,
 160                            PCI_DEVICE_ID_STMICRO_USB_OTG),
 161         },
 162         { /* end: all zeroes */ }
 163 };
 164 MODULE_DEVICE_TABLE(pci, dwc2_pci_ids);
 165
 166 static struct pci_driver dwc2_pci_driver = {
 167         .name = dwc2_driver_name,
 168         .id_table = dwc2_pci_ids,
 169         .probe = dwc2_driver_probe,
 170         .remove = dwc2_driver_remove,
 171 };
 172
 173 module_pci_driver(dwc2_pci_driver);
 174
 175 MODULE_DESCRIPTION("DESIGNWARE HS OTG PCI Bus Glue");
 176 MODULE_AUTHOR("Synopsys, Inc.");
 177 MODULE_LICENSE("Dual BSD/GPL");