mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled
[linux/fpc-iii.git] / drivers / staging / winbond / wbhal.h
blob289ee549146df7c7ae19e30399ac5fb8e442403e
1 #ifndef __WINBOND_WBHAL_S_H
2 #define __WINBOND_WBHAL_S_H
4 #include <linux/types.h>
5 #include <linux/if_ether.h> /* for ETH_ALEN */
7 #define HAL_LED_SET_MASK 0x001c
8 #define HAL_LED_SET_SHIFT 2
10 /* supported RF type */
11 #define RF_MAXIM_2825 0
12 #define RF_MAXIM_2827 1
13 #define RF_MAXIM_2828 2
14 #define RF_MAXIM_2829 3
15 #define RF_MAXIM_V1 15
16 #define RF_AIROHA_2230 16
17 #define RF_AIROHA_7230 17
18 #define RF_AIROHA_2230S 18
19 #define RF_WB_242 33
20 #define RF_WB_242_1 34
21 #define RF_DECIDE_BY_INF 255
24 * ----------------------------------------------------------------
25 * The follow define connect to upper layer
26 * User must modify for connection between HAL and upper layer
27 * ----------------------------------------------------------------
31 * ==============================
32 * Common define
33 * ==============================
35 /* Bit 5 */
36 #define HAL_USB_MODE_BURST(_H) (_H->SoftwareSet & 0x20)
38 /* Scan interval */
39 #define SCAN_MAX_CHNL_TIME (50)
41 /* For TxL2 Frame typr recognise */
42 #define FRAME_TYPE_802_3_DATA 0
43 #define FRAME_TYPE_802_11_MANAGEMENT 1
44 #define FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE 2
45 #define FRAME_TYPE_802_11_CONTROL 3
46 #define FRAME_TYPE_802_11_DATA 4
47 #define FRAME_TYPE_PROMISCUOUS 5
49 /* The follow definition is used for convert the frame------------ */
50 #define DOT_11_SEQUENCE_OFFSET 22 /* Sequence control offset */
51 #define DOT_3_TYPE_OFFSET 12
52 #define DOT_11_MAC_HEADER_SIZE 24
53 #define DOT_11_SNAP_SIZE 6
54 #define DOT_11_TYPE_OFFSET 30 /* The start offset of 802.11 Frame. Type encapsulation. */
55 #define DEFAULT_SIFSTIME 10
56 #define DEFAULT_FRAGMENT_THRESHOLD 2346 /* No fragment */
57 #define DEFAULT_MSDU_LIFE_TIME 0xffff
59 #define LONG_PREAMBLE_PLUS_PLCPHEADER_TIME (144 + 48)
60 #define SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME (72 + 24)
61 #define PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION (16 + 4 + 6)
62 #define Tsym 4
64 /* Frame Type of Bits (2, 3)----------------------------------- */
65 #define MAC_TYPE_MANAGEMENT 0x00
66 #define MAC_TYPE_CONTROL 0x04
67 #define MAC_TYPE_DATA 0x08
68 #define MASK_FRAGMENT_NUMBER 0x000F
69 #define SEQUENCE_NUMBER_SHIFT 4
71 #define HAL_WOL_TYPE_WAKEUP_FRAME 0x01
72 #define HAL_WOL_TYPE_MAGIC_PACKET 0x02
74 #define HAL_KEYTYPE_WEP40 0
75 #define HAL_KEYTYPE_WEP104 1
76 #define HAL_KEYTYPE_TKIP 2 /* 128 bit key */
77 #define HAL_KEYTYPE_AES_CCMP 3 /* 128 bit key */
79 /* For VM state */
80 enum {
81 VM_STOP = 0,
82 VM_RUNNING,
83 VM_COMPLETED
87 * ================================
88 * Normal Key table format
89 * ================================
92 /* The order of KEY index is MAPPING_KEY_START_INDEX > GROUP_KEY_START_INDEX */
93 #define MAX_KEY_TABLE 24 /* 24 entry for storing key data */
94 #define GROUP_KEY_START_INDEX 4
95 #define MAPPING_KEY_START_INDEX 8
98 * =========================================
99 * Descriptor
100 * =========================================
102 #define MAX_DESCRIPTOR_BUFFER_INDEX 8 /* Have to multiple of 2 */
103 #define FLAG_ERROR_TX_MASK 0x000000bf
104 #define FLAG_ERROR_RX_MASK 0x0000083f
106 #define FLAG_BAND_RX_MASK 0x10000000 /* Bit 28 */
108 struct R00_descriptor {
109 union {
110 u32 value;
111 #ifdef _BIG_ENDIAN_
112 struct {
113 u32 R00_packet_or_buffer_status:1;
114 u32 R00_packet_in_fifo:1;
115 u32 R00_RESERVED:2;
116 u32 R00_receive_byte_count:12;
117 u32 R00_receive_time_index:16;
119 #else
120 struct {
121 u32 R00_receive_time_index:16;
122 u32 R00_receive_byte_count:12;
123 u32 R00_RESERVED:2;
124 u32 R00_packet_in_fifo:1;
125 u32 R00_packet_or_buffer_status:1;
127 #endif
131 struct T00_descriptor {
132 union {
133 u32 value;
134 #ifdef _BIG_ENDIAN_
135 struct {
136 u32 T00_first_mpdu:1; /* for hardware use */
137 u32 T00_last_mpdu:1; /* for hardware use */
138 u32 T00_IsLastMpdu:1;/* 0:not 1:Yes for software used */
139 u32 T00_IgnoreResult:1;/* The same mechanism with T00 setting. */
140 u32 T00_RESERVED_ID:2;/* 3 bit ID reserved */
141 u32 T00_tx_packet_id:4;
142 u32 T00_RESERVED:4;
143 u32 T00_header_length:6;
144 u32 T00_frame_length:12;
146 #else
147 struct {
148 u32 T00_frame_length:12;
149 u32 T00_header_length:6;
150 u32 T00_RESERVED:4;
151 u32 T00_tx_packet_id:4;
152 u32 T00_RESERVED_ID:2; /* 3 bit ID reserved */
153 u32 T00_IgnoreResult:1; /* The same mechanism with T00 setting. */
154 u32 T00_IsLastMpdu:1; /* 0:not 1:Yes for software used */
155 u32 T00_last_mpdu:1; /* for hardware use */
156 u32 T00_first_mpdu:1; /* for hardware use */
158 #endif
162 struct R01_descriptor {
163 union {
164 u32 value;
165 #ifdef _BIG_ENDIAN_
166 struct {
167 u32 R01_RESERVED:3;
168 u32 R01_mod_type:1;
169 u32 R01_pre_type:1;
170 u32 R01_data_rate:3;
171 u32 R01_AGC_state:8;
172 u32 R01_LNA_state:2;
173 u32 R01_decryption_method:2;
174 u32 R01_mic_error:1;
175 u32 R01_replay:1;
176 u32 R01_broadcast_frame:1;
177 u32 R01_multicast_frame:1;
178 u32 R01_directed_frame:1;
179 u32 R01_receive_frame_antenna_selection:1;
180 u32 R01_frame_receive_during_atim_window:1;
181 u32 R01_protocol_version_error:1;
182 u32 R01_authentication_frame_icv_error:1;
183 u32 R01_null_key_to_authentication_frame:1;
184 u32 R01_icv_error:1;
185 u32 R01_crc_error:1;
187 #else
188 struct {
189 u32 R01_crc_error:1;
190 u32 R01_icv_error:1;
191 u32 R01_null_key_to_authentication_frame:1;
192 u32 R01_authentication_frame_icv_error:1;
193 u32 R01_protocol_version_error:1;
194 u32 R01_frame_receive_during_atim_window:1;
195 u32 R01_receive_frame_antenna_selection:1;
196 u32 R01_directed_frame:1;
197 u32 R01_multicast_frame:1;
198 u32 R01_broadcast_frame:1;
199 u32 R01_replay:1;
200 u32 R01_mic_error:1;
201 u32 R01_decryption_method:2;
202 u32 R01_LNA_state:2;
203 u32 R01_AGC_state:8;
204 u32 R01_data_rate:3;
205 u32 R01_pre_type:1;
206 u32 R01_mod_type:1;
207 u32 R01_RESERVED:3;
209 #endif
213 struct T01_descriptor {
214 union {
215 u32 value;
216 #ifdef _BIG_ENDIAN_
217 struct {
218 u32 T01_rts_cts_duration:16;
219 u32 T01_fall_back_rate:3;
220 u32 T01_add_rts:1;
221 u32 T01_add_cts:1;
222 u32 T01_modulation_type:1;
223 u32 T01_plcp_header_length:1;
224 u32 T01_transmit_rate:3;
225 u32 T01_wep_id:2;
226 u32 T01_add_challenge_text:1;
227 u32 T01_inhibit_crc:1;
228 u32 T01_loop_back_wep_mode:1;
229 u32 T01_retry_abort_enable:1;
231 #else
232 struct {
233 u32 T01_retry_abort_enable:1;
234 u32 T01_loop_back_wep_mode:1;
235 u32 T01_inhibit_crc:1;
236 u32 T01_add_challenge_text:1;
237 u32 T01_wep_id:2;
238 u32 T01_transmit_rate:3;
239 u32 T01_plcp_header_length:1;
240 u32 T01_modulation_type:1;
241 u32 T01_add_cts:1;
242 u32 T01_add_rts:1;
243 u32 T01_fall_back_rate:3;
244 u32 T01_rts_cts_duration:16;
246 #endif
250 struct T02_descriptor {
251 union {
252 u32 value;
253 #ifdef _BIG_ENDIAN_
254 struct {
255 u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
256 u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
257 u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
258 u32 T02_Tx_PktID:4;
259 u32 T02_MPDU_Cnt:4;
260 u32 T02_RTS_Cnt:4;
261 u32 T02_RESERVED:7;
262 u32 T02_transmit_complete:1;
263 u32 T02_transmit_abort_due_to_TBTT:1;
264 u32 T02_effective_transmission_rate:1;
265 u32 T02_transmit_without_encryption_due_to_wep_on_false:1;
266 u32 T02_discard_due_to_null_wep_key:1;
267 u32 T02_RESERVED_1:1;
268 u32 T02_out_of_MaxTxMSDULiftTime:1;
269 u32 T02_transmit_abort:1;
270 u32 T02_transmit_fail:1;
272 #else
273 struct {
274 u32 T02_transmit_fail:1;
275 u32 T02_transmit_abort:1;
276 u32 T02_out_of_MaxTxMSDULiftTime:1;
277 u32 T02_RESERVED_1:1;
278 u32 T02_discard_due_to_null_wep_key:1;
279 u32 T02_transmit_without_encryption_due_to_wep_on_false:1;
280 u32 T02_effective_transmission_rate:1;
281 u32 T02_transmit_abort_due_to_TBTT:1;
282 u32 T02_transmit_complete:1;
283 u32 T02_RESERVED:7;
284 u32 T02_RTS_Cnt:4;
285 u32 T02_MPDU_Cnt:4;
286 u32 T02_Tx_PktID:4;
287 u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
288 u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
289 u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
291 #endif
295 struct wb35_descriptor { /* Skip length = 8 DWORD */
296 /* ID for descriptor ---, The field doesn't be cleard in the operation of Descriptor definition */
297 u8 Descriptor_ID;
298 /* ----------------------The above region doesn't be cleared by DESCRIPTOR_RESET------ */
299 u8 RESERVED[3];
301 u16 FragmentThreshold;
302 u8 InternalUsed; /* Only can be used by operation of descriptor definition */
303 u8 Type; /* 0: 802.3 1:802.11 data frame 2:802.11 management frame */
305 u8 PreambleMode;/* 0: short 1:long */
306 u8 TxRate;
307 u8 FragmentCount;
308 u8 EapFix; /* For speed up key install */
310 /* For R00 and T00 ------------------------------ */
311 union {
312 struct R00_descriptor R00;
313 struct T00_descriptor T00;
316 /* For R01 and T01 ------------------------------ */
317 union {
318 struct R01_descriptor R01;
319 struct T01_descriptor T01;
322 /* For R02 and T02 ------------------------------ */
323 union {
324 u32 R02;
325 struct T02_descriptor T02;
328 /* For R03 and T03 ------------------------------ */
329 /* For software used */
330 union {
331 u32 R03;
332 u32 T03;
333 struct {
334 u8 buffer_number;
335 u8 buffer_start_index;
336 u16 buffer_total_size;
340 /* For storing the buffer */
341 u16 buffer_size[MAX_DESCRIPTOR_BUFFER_INDEX];
342 void *buffer_address[MAX_DESCRIPTOR_BUFFER_INDEX];
345 #define MAX_TXVGA_EEPROM 9 /* How many word(u16) of EEPROM will be used for TxVGA */
346 #define MAX_RF_PARAMETER 32
348 struct txvga_for_50 {
349 u8 ChanNo;
350 u8 TxVgaValue;
354 * ==============================================
355 * Device related include
356 * ==============================================
359 #include "wb35reg_s.h"
360 #include "wb35tx_s.h"
361 #include "wb35rx_s.h"
363 /* For Hal using ============================================ */
364 struct hw_data {
365 /* For compatible with 33 */
366 u32 revision;
367 u32 BB3c_cal; /* The value for Tx calibration comes from EEPROM */
368 u32 BB54_cal; /* The value for Rx calibration comes from EEPROM */
370 /* For surprise remove */
371 u32 SurpriseRemove; /* 0: Normal 1: Surprise remove */
372 u8 IsKeyPreSet;
373 u8 CalOneTime;
375 u8 VCO_trim;
377 u32 FragCount;
378 u32 DMAFix; /* V1_DMA_FIX The variable can be removed if driver want to save mem space for V2. */
381 * ===============================================
382 * Definition for MAC address
383 * ===============================================
385 u8 PermanentMacAddress[ETH_ALEN + 2]; /* The Ethernet addr that are stored in EEPROM. + 2 to 8-byte alignment */
386 u8 CurrentMacAddress[ETH_ALEN + 2]; /* The Enthernet addr that are in used. + 2 to 8-byte alignment */
389 * =========================================
390 * Definition for 802.11
391 * =========================================
393 u8 *bssid_pointer; /* Used by hal_get_bssid for return value */
394 u8 bssid[8]; /* Only 6 byte will be used. 8 byte is required for read buffer */
395 u8 ssid[32]; /* maximum ssid length is 32 byte */
397 u16 AID;
398 u8 ssid_length;
399 u8 Channel;
401 u16 ListenInterval;
402 u16 CapabilityInformation;
404 u16 BeaconPeriod;
405 u16 ProbeDelay;
407 u8 bss_type;/* 0: IBSS_NET or 1:ESS_NET */
408 u8 preamble;/* 0: short preamble, 1: long preamble */
409 u8 slot_time_select; /* 9 or 20 value */
410 u8 phy_type; /* Phy select */
412 u32 phy_para[MAX_RF_PARAMETER];
413 u32 phy_number;
415 u32 CurrentRadioSw; /* 0:On 1:Off */
416 u32 CurrentRadioHw; /* 0:On 1:Off */
418 u8 *power_save_point; /* Used by hal_get_power_save_mode for return value */
419 u8 cwmin;
420 u8 desired_power_save;
421 u8 dtim; /* Is running dtim */
422 u8 mapping_key_replace_index; /* In Key table, the next index be replaced */
424 u16 MaxReceiveLifeTime;
425 u16 FragmentThreshold;
426 u16 FragmentThreshold_tmp;
427 u16 cwmax;
429 u8 Key_slot[MAX_KEY_TABLE][8]; /* Ownership record for key slot. For Alignment */
430 u32 Key_content[MAX_KEY_TABLE][12]; /* 10DW for each entry + 2 for burst command (Off and On valid bit) */
431 u8 CurrentDefaultKeyIndex;
432 u32 CurrentDefaultKeyLength;
435 * ==================================================
436 * Variable for each module
437 * ==================================================
439 struct usb_device *udev;
440 struct wb35_reg reg; /* Need Wb35Reg.h */
441 struct wb35_tx Wb35Tx; /* Need Wb35Tx.h */
442 struct wb35_rx Wb35Rx; /* Need Wb35Rx.h */
444 struct timer_list LEDTimer; /* For LED */
446 u32 LEDpoint; /* For LED */
448 u32 dto_tx_retry_count;
449 u32 dto_tx_frag_count;
450 u32 rx_ok_count[13]; /* index=0: total rx ok */
451 u32 rx_err_count[13]; /* index=0: total rx err */
453 /* for Tx debug */
454 u32 tx_TBTT_start_count;
455 u32 tx_ETR_count;
456 u32 tx_WepOn_false_count;
457 u32 tx_Null_key_count;
458 u32 tx_retry_count[8];
460 u8 PowerIndexFromEEPROM; /* For 2412MHz */
461 u8 power_index;
462 u8 IsWaitJoinComplete; /* TRUE: set join request */
463 u8 band;
465 u16 SoftwareSet;
466 u16 Reserved_s;
468 u32 IsInitOK; /* 0: Driver starting 1: Driver init OK */
470 /* For Phy calibration */
471 s32 iq_rsdl_gain_tx_d2;
472 s32 iq_rsdl_phase_tx_d2;
473 u32 txvga_setting_for_cal;
475 u8 TxVgaSettingInEEPROM[(((MAX_TXVGA_EEPROM * 2) + 3) & ~0x03)]; /* For EEPROM value */
476 u8 TxVgaFor24[16]; /* Max is 14, 2 for alignment */
477 struct txvga_for_50 TxVgaFor50[36]; /* 35 channels in 5G. 35x2 = 70 byte. 2 for alignments */
479 u16 Scan_Interval;
480 u16 RESERVED6;
482 /* LED control */
483 u32 LED_control;
485 * LED_control 4 byte: Gray_Led_1[3] Gray_Led_0[2] Led[1] Led[0]
486 * Gray_Led
487 * For Led gray setting
488 * Led
489 * 0: normal control,
490 * LED behavior will decide by EEPROM setting
491 * 1: Turn off specific LED
492 * 2: Always on specific LED
493 * 3: slow blinking specific LED
494 * 4: fast blinking specific LED
495 * 5: WPS led control is set. Led0 is Red, Led1 id Green
497 * Led[1] is parameter for WPS LED mode
498 * 1:InProgress
499 * 2: Error
500 * 3: Session overlap
501 * 4: Success control
503 u32 LED_LinkOn; /* Turn LED on control */
504 u32 LED_Scanning; /* Let LED in scan process control */
505 u32 LED_Blinking; /* Temp variable for shining */
506 u32 RxByteCountLast;
507 u32 TxByteCountLast;
509 /* For global timer */
510 u32 time_count; /* TICK_TIME_100ms 1 = 100ms */
513 #endif