mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled
[linux/fpc-iii.git] / drivers / watchdog / iTCO_wdt.c
blob6130321da3871dc80b020acc232fca4fc0b8cffc
1 /*
2 * intel TCO Watchdog Driver
4 * (c) Copyright 2006-2011 Wim Van Sebroeck <wim@iguana.be>.
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
11 * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
12 * provide warranty for any of this software. This material is
13 * provided "AS-IS" and at no charge.
15 * The TCO watchdog is implemented in the following I/O controller hubs:
16 * (See the intel documentation on http://developer.intel.com.)
17 * document number 290655-003, 290677-014: 82801AA (ICH), 82801AB (ICHO)
18 * document number 290687-002, 298242-027: 82801BA (ICH2)
19 * document number 290733-003, 290739-013: 82801CA (ICH3-S)
20 * document number 290716-001, 290718-007: 82801CAM (ICH3-M)
21 * document number 290744-001, 290745-025: 82801DB (ICH4)
22 * document number 252337-001, 252663-008: 82801DBM (ICH4-M)
23 * document number 273599-001, 273645-002: 82801E (C-ICH)
24 * document number 252516-001, 252517-028: 82801EB (ICH5), 82801ER (ICH5R)
25 * document number 300641-004, 300884-013: 6300ESB
26 * document number 301473-002, 301474-026: 82801F (ICH6)
27 * document number 313082-001, 313075-006: 631xESB, 632xESB
28 * document number 307013-003, 307014-024: 82801G (ICH7)
29 * document number 322896-001, 322897-001: NM10
30 * document number 313056-003, 313057-017: 82801H (ICH8)
31 * document number 316972-004, 316973-012: 82801I (ICH9)
32 * document number 319973-002, 319974-002: 82801J (ICH10)
33 * document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH)
34 * document number 320066-003, 320257-008: EP80597 (IICH)
35 * document number 324645-001, 324646-001: Cougar Point (CPT)
36 * document number TBD : Patsburg (PBG)
37 * document number TBD : DH89xxCC
38 * document number TBD : Panther Point
39 * document number TBD : Lynx Point
40 * document number TBD : Lynx Point-LP
44 * Includes, defines, variables, module parameters, ...
47 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
49 /* Module and version information */
50 #define DRV_NAME "iTCO_wdt"
51 #define DRV_VERSION "1.10"
53 /* Includes */
54 #include <linux/module.h> /* For module specific items */
55 #include <linux/moduleparam.h> /* For new moduleparam's */
56 #include <linux/types.h> /* For standard types (like size_t) */
57 #include <linux/errno.h> /* For the -ENODEV/... values */
58 #include <linux/kernel.h> /* For printk/panic/... */
59 #include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV
60 (WATCHDOG_MINOR) */
61 #include <linux/watchdog.h> /* For the watchdog specific items */
62 #include <linux/init.h> /* For __init/__exit/... */
63 #include <linux/fs.h> /* For file operations */
64 #include <linux/platform_device.h> /* For platform_driver framework */
65 #include <linux/pci.h> /* For pci functions */
66 #include <linux/ioport.h> /* For io-port access */
67 #include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
68 #include <linux/uaccess.h> /* For copy_to_user/put_user/... */
69 #include <linux/io.h> /* For inb/outb/... */
70 #include <linux/mfd/core.h>
71 #include <linux/mfd/lpc_ich.h>
73 #include "iTCO_vendor.h"
75 /* Address definitions for the TCO */
76 /* TCO base address */
77 #define TCOBASE (iTCO_wdt_private.tco_res->start)
78 /* SMI Control and Enable Register */
79 #define SMI_EN (iTCO_wdt_private.smi_res->start)
81 #define TCO_RLD (TCOBASE + 0x00) /* TCO Timer Reload and Curr. Value */
82 #define TCOv1_TMR (TCOBASE + 0x01) /* TCOv1 Timer Initial Value */
83 #define TCO_DAT_IN (TCOBASE + 0x02) /* TCO Data In Register */
84 #define TCO_DAT_OUT (TCOBASE + 0x03) /* TCO Data Out Register */
85 #define TCO1_STS (TCOBASE + 0x04) /* TCO1 Status Register */
86 #define TCO2_STS (TCOBASE + 0x06) /* TCO2 Status Register */
87 #define TCO1_CNT (TCOBASE + 0x08) /* TCO1 Control Register */
88 #define TCO2_CNT (TCOBASE + 0x0a) /* TCO2 Control Register */
89 #define TCOv2_TMR (TCOBASE + 0x12) /* TCOv2 Timer Initial Value */
91 /* internal variables */
92 static struct { /* this is private data for the iTCO_wdt device */
93 /* TCO version/generation */
94 unsigned int iTCO_version;
95 struct resource *tco_res;
96 struct resource *smi_res;
97 struct resource *gcs_res;
98 /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2)*/
99 unsigned long __iomem *gcs;
100 /* the lock for io operations */
101 spinlock_t io_lock;
102 struct platform_device *dev;
103 /* the PCI-device */
104 struct pci_dev *pdev;
105 } iTCO_wdt_private;
107 /* module parameters */
108 #define WATCHDOG_TIMEOUT 30 /* 30 sec default heartbeat */
109 static int heartbeat = WATCHDOG_TIMEOUT; /* in seconds */
110 module_param(heartbeat, int, 0);
111 MODULE_PARM_DESC(heartbeat, "Watchdog timeout in seconds. "
112 "5..76 (TCO v1) or 3..614 (TCO v2), default="
113 __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
115 static bool nowayout = WATCHDOG_NOWAYOUT;
116 module_param(nowayout, bool, 0);
117 MODULE_PARM_DESC(nowayout,
118 "Watchdog cannot be stopped once started (default="
119 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
121 static int turn_SMI_watchdog_clear_off = 1;
122 module_param(turn_SMI_watchdog_clear_off, int, 0);
123 MODULE_PARM_DESC(turn_SMI_watchdog_clear_off,
124 "Turn off SMI clearing watchdog (depends on TCO-version)(default=1)");
127 * Some TCO specific functions
130 static inline unsigned int seconds_to_ticks(int seconds)
132 /* the internal timer is stored as ticks which decrement
133 * every 0.6 seconds */
134 return (seconds * 10) / 6;
137 static void iTCO_wdt_set_NO_REBOOT_bit(void)
139 u32 val32;
141 /* Set the NO_REBOOT bit: this disables reboots */
142 if (iTCO_wdt_private.iTCO_version == 2) {
143 val32 = readl(iTCO_wdt_private.gcs);
144 val32 |= 0x00000020;
145 writel(val32, iTCO_wdt_private.gcs);
146 } else if (iTCO_wdt_private.iTCO_version == 1) {
147 pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
148 val32 |= 0x00000002;
149 pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
153 static int iTCO_wdt_unset_NO_REBOOT_bit(void)
155 int ret = 0;
156 u32 val32;
158 /* Unset the NO_REBOOT bit: this enables reboots */
159 if (iTCO_wdt_private.iTCO_version == 2) {
160 val32 = readl(iTCO_wdt_private.gcs);
161 val32 &= 0xffffffdf;
162 writel(val32, iTCO_wdt_private.gcs);
164 val32 = readl(iTCO_wdt_private.gcs);
165 if (val32 & 0x00000020)
166 ret = -EIO;
167 } else if (iTCO_wdt_private.iTCO_version == 1) {
168 pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
169 val32 &= 0xfffffffd;
170 pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
172 pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
173 if (val32 & 0x00000002)
174 ret = -EIO;
177 return ret; /* returns: 0 = OK, -EIO = Error */
180 static int iTCO_wdt_start(struct watchdog_device *wd_dev)
182 unsigned int val;
184 spin_lock(&iTCO_wdt_private.io_lock);
186 iTCO_vendor_pre_start(iTCO_wdt_private.smi_res, wd_dev->timeout);
188 /* disable chipset's NO_REBOOT bit */
189 if (iTCO_wdt_unset_NO_REBOOT_bit()) {
190 spin_unlock(&iTCO_wdt_private.io_lock);
191 pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n");
192 return -EIO;
195 /* Force the timer to its reload value by writing to the TCO_RLD
196 register */
197 if (iTCO_wdt_private.iTCO_version == 2)
198 outw(0x01, TCO_RLD);
199 else if (iTCO_wdt_private.iTCO_version == 1)
200 outb(0x01, TCO_RLD);
202 /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
203 val = inw(TCO1_CNT);
204 val &= 0xf7ff;
205 outw(val, TCO1_CNT);
206 val = inw(TCO1_CNT);
207 spin_unlock(&iTCO_wdt_private.io_lock);
209 if (val & 0x0800)
210 return -1;
211 return 0;
214 static int iTCO_wdt_stop(struct watchdog_device *wd_dev)
216 unsigned int val;
218 spin_lock(&iTCO_wdt_private.io_lock);
220 iTCO_vendor_pre_stop(iTCO_wdt_private.smi_res);
222 /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
223 val = inw(TCO1_CNT);
224 val |= 0x0800;
225 outw(val, TCO1_CNT);
226 val = inw(TCO1_CNT);
228 /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
229 iTCO_wdt_set_NO_REBOOT_bit();
231 spin_unlock(&iTCO_wdt_private.io_lock);
233 if ((val & 0x0800) == 0)
234 return -1;
235 return 0;
238 static int iTCO_wdt_ping(struct watchdog_device *wd_dev)
240 spin_lock(&iTCO_wdt_private.io_lock);
242 iTCO_vendor_pre_keepalive(iTCO_wdt_private.smi_res, wd_dev->timeout);
244 /* Reload the timer by writing to the TCO Timer Counter register */
245 if (iTCO_wdt_private.iTCO_version == 2)
246 outw(0x01, TCO_RLD);
247 else if (iTCO_wdt_private.iTCO_version == 1) {
248 /* Reset the timeout status bit so that the timer
249 * needs to count down twice again before rebooting */
250 outw(0x0008, TCO1_STS); /* write 1 to clear bit */
252 outb(0x01, TCO_RLD);
255 spin_unlock(&iTCO_wdt_private.io_lock);
256 return 0;
259 static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t)
261 unsigned int val16;
262 unsigned char val8;
263 unsigned int tmrval;
265 tmrval = seconds_to_ticks(t);
267 /* For TCO v1 the timer counts down twice before rebooting */
268 if (iTCO_wdt_private.iTCO_version == 1)
269 tmrval /= 2;
271 /* from the specs: */
272 /* "Values of 0h-3h are ignored and should not be attempted" */
273 if (tmrval < 0x04)
274 return -EINVAL;
275 if (((iTCO_wdt_private.iTCO_version == 2) && (tmrval > 0x3ff)) ||
276 ((iTCO_wdt_private.iTCO_version == 1) && (tmrval > 0x03f)))
277 return -EINVAL;
279 iTCO_vendor_pre_set_heartbeat(tmrval);
281 /* Write new heartbeat to watchdog */
282 if (iTCO_wdt_private.iTCO_version == 2) {
283 spin_lock(&iTCO_wdt_private.io_lock);
284 val16 = inw(TCOv2_TMR);
285 val16 &= 0xfc00;
286 val16 |= tmrval;
287 outw(val16, TCOv2_TMR);
288 val16 = inw(TCOv2_TMR);
289 spin_unlock(&iTCO_wdt_private.io_lock);
291 if ((val16 & 0x3ff) != tmrval)
292 return -EINVAL;
293 } else if (iTCO_wdt_private.iTCO_version == 1) {
294 spin_lock(&iTCO_wdt_private.io_lock);
295 val8 = inb(TCOv1_TMR);
296 val8 &= 0xc0;
297 val8 |= (tmrval & 0xff);
298 outb(val8, TCOv1_TMR);
299 val8 = inb(TCOv1_TMR);
300 spin_unlock(&iTCO_wdt_private.io_lock);
302 if ((val8 & 0x3f) != tmrval)
303 return -EINVAL;
306 wd_dev->timeout = t;
307 return 0;
310 static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev)
312 unsigned int val16;
313 unsigned char val8;
314 unsigned int time_left = 0;
316 /* read the TCO Timer */
317 if (iTCO_wdt_private.iTCO_version == 2) {
318 spin_lock(&iTCO_wdt_private.io_lock);
319 val16 = inw(TCO_RLD);
320 val16 &= 0x3ff;
321 spin_unlock(&iTCO_wdt_private.io_lock);
323 time_left = (val16 * 6) / 10;
324 } else if (iTCO_wdt_private.iTCO_version == 1) {
325 spin_lock(&iTCO_wdt_private.io_lock);
326 val8 = inb(TCO_RLD);
327 val8 &= 0x3f;
328 if (!(inw(TCO1_STS) & 0x0008))
329 val8 += (inb(TCOv1_TMR) & 0x3f);
330 spin_unlock(&iTCO_wdt_private.io_lock);
332 time_left = (val8 * 6) / 10;
334 return time_left;
338 * Kernel Interfaces
341 static const struct watchdog_info ident = {
342 .options = WDIOF_SETTIMEOUT |
343 WDIOF_KEEPALIVEPING |
344 WDIOF_MAGICCLOSE,
345 .firmware_version = 0,
346 .identity = DRV_NAME,
349 static const struct watchdog_ops iTCO_wdt_ops = {
350 .owner = THIS_MODULE,
351 .start = iTCO_wdt_start,
352 .stop = iTCO_wdt_stop,
353 .ping = iTCO_wdt_ping,
354 .set_timeout = iTCO_wdt_set_timeout,
355 .get_timeleft = iTCO_wdt_get_timeleft,
358 static struct watchdog_device iTCO_wdt_watchdog_dev = {
359 .info = &ident,
360 .ops = &iTCO_wdt_ops,
364 * Init & exit routines
367 static void iTCO_wdt_cleanup(void)
369 /* Stop the timer before we leave */
370 if (!nowayout)
371 iTCO_wdt_stop(&iTCO_wdt_watchdog_dev);
373 /* Deregister */
374 watchdog_unregister_device(&iTCO_wdt_watchdog_dev);
376 /* release resources */
377 release_region(iTCO_wdt_private.tco_res->start,
378 resource_size(iTCO_wdt_private.tco_res));
379 release_region(iTCO_wdt_private.smi_res->start,
380 resource_size(iTCO_wdt_private.smi_res));
381 if (iTCO_wdt_private.iTCO_version == 2) {
382 iounmap(iTCO_wdt_private.gcs);
383 release_mem_region(iTCO_wdt_private.gcs_res->start,
384 resource_size(iTCO_wdt_private.gcs_res));
387 iTCO_wdt_private.tco_res = NULL;
388 iTCO_wdt_private.smi_res = NULL;
389 iTCO_wdt_private.gcs_res = NULL;
390 iTCO_wdt_private.gcs = NULL;
393 static int iTCO_wdt_probe(struct platform_device *dev)
395 int ret = -ENODEV;
396 unsigned long val32;
397 struct lpc_ich_info *ich_info = dev->dev.platform_data;
399 if (!ich_info)
400 goto out;
402 spin_lock_init(&iTCO_wdt_private.io_lock);
404 iTCO_wdt_private.tco_res =
405 platform_get_resource(dev, IORESOURCE_IO, ICH_RES_IO_TCO);
406 if (!iTCO_wdt_private.tco_res)
407 goto out;
409 iTCO_wdt_private.smi_res =
410 platform_get_resource(dev, IORESOURCE_IO, ICH_RES_IO_SMI);
411 if (!iTCO_wdt_private.smi_res)
412 goto out;
414 iTCO_wdt_private.iTCO_version = ich_info->iTCO_version;
415 iTCO_wdt_private.dev = dev;
416 iTCO_wdt_private.pdev = to_pci_dev(dev->dev.parent);
419 * Get the Memory-Mapped GCS register, we need it for the
420 * NO_REBOOT flag (TCO v2).
422 if (iTCO_wdt_private.iTCO_version == 2) {
423 iTCO_wdt_private.gcs_res = platform_get_resource(dev,
424 IORESOURCE_MEM,
425 ICH_RES_MEM_GCS);
427 if (!iTCO_wdt_private.gcs_res)
428 goto out;
430 if (!request_mem_region(iTCO_wdt_private.gcs_res->start,
431 resource_size(iTCO_wdt_private.gcs_res), dev->name)) {
432 ret = -EBUSY;
433 goto out;
435 iTCO_wdt_private.gcs = ioremap(iTCO_wdt_private.gcs_res->start,
436 resource_size(iTCO_wdt_private.gcs_res));
437 if (!iTCO_wdt_private.gcs) {
438 ret = -EIO;
439 goto unreg_gcs;
443 /* Check chipset's NO_REBOOT bit */
444 if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) {
445 pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n");
446 ret = -ENODEV; /* Cannot reset NO_REBOOT bit */
447 goto unmap_gcs;
450 /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
451 iTCO_wdt_set_NO_REBOOT_bit();
453 /* The TCO logic uses the TCO_EN bit in the SMI_EN register */
454 if (!request_region(iTCO_wdt_private.smi_res->start,
455 resource_size(iTCO_wdt_private.smi_res), dev->name)) {
456 pr_err("I/O address 0x%04llx already in use, device disabled\n",
457 (u64)SMI_EN);
458 ret = -EBUSY;
459 goto unmap_gcs;
461 if (turn_SMI_watchdog_clear_off >= iTCO_wdt_private.iTCO_version) {
463 * Bit 13: TCO_EN -> 0
464 * Disables TCO logic generating an SMI#
466 val32 = inl(SMI_EN);
467 val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
468 outl(val32, SMI_EN);
471 if (!request_region(iTCO_wdt_private.tco_res->start,
472 resource_size(iTCO_wdt_private.tco_res), dev->name)) {
473 pr_err("I/O address 0x%04llx already in use, device disabled\n",
474 (u64)TCOBASE);
475 ret = -EBUSY;
476 goto unreg_smi;
479 pr_info("Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n",
480 ich_info->name, ich_info->iTCO_version, (u64)TCOBASE);
482 /* Clear out the (probably old) status */
483 outw(0x0008, TCO1_STS); /* Clear the Time Out Status bit */
484 outw(0x0002, TCO2_STS); /* Clear SECOND_TO_STS bit */
485 outw(0x0004, TCO2_STS); /* Clear BOOT_STS bit */
487 iTCO_wdt_watchdog_dev.bootstatus = 0;
488 iTCO_wdt_watchdog_dev.timeout = WATCHDOG_TIMEOUT;
489 watchdog_set_nowayout(&iTCO_wdt_watchdog_dev, nowayout);
490 iTCO_wdt_watchdog_dev.parent = dev->dev.parent;
492 /* Make sure the watchdog is not running */
493 iTCO_wdt_stop(&iTCO_wdt_watchdog_dev);
495 /* Check that the heartbeat value is within it's range;
496 if not reset to the default */
497 if (iTCO_wdt_set_timeout(&iTCO_wdt_watchdog_dev, heartbeat)) {
498 iTCO_wdt_set_timeout(&iTCO_wdt_watchdog_dev, WATCHDOG_TIMEOUT);
499 pr_info("timeout value out of range, using %d\n",
500 WATCHDOG_TIMEOUT);
503 ret = watchdog_register_device(&iTCO_wdt_watchdog_dev);
504 if (ret != 0) {
505 pr_err("cannot register watchdog device (err=%d)\n", ret);
506 goto unreg_tco;
509 pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n",
510 heartbeat, nowayout);
512 return 0;
514 unreg_tco:
515 release_region(iTCO_wdt_private.tco_res->start,
516 resource_size(iTCO_wdt_private.tco_res));
517 unreg_smi:
518 release_region(iTCO_wdt_private.smi_res->start,
519 resource_size(iTCO_wdt_private.smi_res));
520 unmap_gcs:
521 if (iTCO_wdt_private.iTCO_version == 2)
522 iounmap(iTCO_wdt_private.gcs);
523 unreg_gcs:
524 if (iTCO_wdt_private.iTCO_version == 2)
525 release_mem_region(iTCO_wdt_private.gcs_res->start,
526 resource_size(iTCO_wdt_private.gcs_res));
527 out:
528 iTCO_wdt_private.tco_res = NULL;
529 iTCO_wdt_private.smi_res = NULL;
530 iTCO_wdt_private.gcs_res = NULL;
531 iTCO_wdt_private.gcs = NULL;
533 return ret;
536 static int iTCO_wdt_remove(struct platform_device *dev)
538 if (iTCO_wdt_private.tco_res || iTCO_wdt_private.smi_res)
539 iTCO_wdt_cleanup();
541 return 0;
544 static void iTCO_wdt_shutdown(struct platform_device *dev)
546 iTCO_wdt_stop(NULL);
549 static struct platform_driver iTCO_wdt_driver = {
550 .probe = iTCO_wdt_probe,
551 .remove = iTCO_wdt_remove,
552 .shutdown = iTCO_wdt_shutdown,
553 .driver = {
554 .owner = THIS_MODULE,
555 .name = DRV_NAME,
559 static int __init iTCO_wdt_init_module(void)
561 int err;
563 pr_info("Intel TCO WatchDog Timer Driver v%s\n", DRV_VERSION);
565 err = platform_driver_register(&iTCO_wdt_driver);
566 if (err)
567 return err;
569 return 0;
572 static void __exit iTCO_wdt_cleanup_module(void)
574 platform_driver_unregister(&iTCO_wdt_driver);
575 pr_info("Watchdog Module Unloaded\n");
578 module_init(iTCO_wdt_init_module);
579 module_exit(iTCO_wdt_cleanup_module);
581 MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
582 MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver");
583 MODULE_VERSION(DRV_VERSION);
584 MODULE_LICENSE("GPL");
585 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
586 MODULE_ALIAS("platform:" DRV_NAME);