mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled
[linux/fpc-iii.git] / include / net / mac802154.h
blob807d6b7a943fecab78db1afd6b57ee33b70ded72
1 /*
2 * IEEE802.15.4-2003 specification
4 * Copyright (C) 2007-2012 Siemens AG
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2
8 * as published by the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License along
16 * with this program; if not, write to the Free Software Foundation, Inc.,
17 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
19 #ifndef NET_MAC802154_H
20 #define NET_MAC802154_H
22 #include <net/af_ieee802154.h>
24 /* General MAC frame format:
25 * 2 bytes: Frame Control
26 * 1 byte: Sequence Number
27 * 20 bytes: Addressing fields
28 * 14 bytes: Auxiliary Security Header
30 #define MAC802154_FRAME_HARD_HEADER_LEN (2 + 1 + 20 + 14)
32 /* The following flags are used to indicate changed address settings from
33 * the stack to the hardware.
36 /* indicates that the Short Address changed */
37 #define IEEE802515_AFILT_SADDR_CHANGED 0x00000001
38 /* indicates that the IEEE Address changed */
39 #define IEEE802515_AFILT_IEEEADDR_CHANGED 0x00000002
40 /* indicates that the PAN ID changed */
41 #define IEEE802515_AFILT_PANID_CHANGED 0x00000004
42 /* indicates that PAN Coordinator status changed */
43 #define IEEE802515_AFILT_PANC_CHANGED 0x00000008
45 struct ieee802154_hw_addr_filt {
46 __le16 pan_id; /* Each independent PAN selects a unique
47 * identifier. This PAN id allows communication
48 * between devices within a network using short
49 * addresses and enables transmissions between
50 * devices across independent networks.
52 __le16 short_addr;
53 u8 ieee_addr[IEEE802154_ADDR_LEN];
54 u8 pan_coord;
57 struct ieee802154_dev {
58 /* filled by the driver */
59 int extra_tx_headroom;
60 u32 flags;
61 struct device *parent;
63 /* filled by mac802154 core */
64 struct ieee802154_hw_addr_filt hw_filt;
65 void *priv;
66 struct wpan_phy *phy;
69 /* Checksum is in hardware and is omitted from a packet
71 * These following flags are used to indicate hardware capabilities to
72 * the stack. Generally, flags here should have their meaning
73 * done in a way that the simplest hardware doesn't need setting
74 * any particular flags. There are some exceptions to this rule,
75 * however, so you are advised to review these flags carefully.
78 /* Indicates that receiver omits FCS and xmitter will add FCS on it's own. */
79 #define IEEE802154_HW_OMIT_CKSUM 0x00000001
80 /* Indicates that receiver will autorespond with ACK frames. */
81 #define IEEE802154_HW_AACK 0x00000002
83 /* struct ieee802154_ops - callbacks from mac802154 to the driver
85 * This structure contains various callbacks that the driver may
86 * handle or, in some cases, must handle, for example to transmit
87 * a frame.
89 * start: Handler that 802.15.4 module calls for device initialization.
90 * This function is called before the first interface is attached.
92 * stop: Handler that 802.15.4 module calls for device cleanup.
93 * This function is called after the last interface is removed.
95 * xmit: Handler that 802.15.4 module calls for each transmitted frame.
96 * skb cntains the buffer starting from the IEEE 802.15.4 header.
97 * The low-level driver should send the frame based on available
98 * configuration.
99 * This function should return zero or negative errno. Called with
100 * pib_lock held.
102 * ed: Handler that 802.15.4 module calls for Energy Detection.
103 * This function should place the value for detected energy
104 * (usually device-dependant) in the level pointer and return
105 * either zero or negative errno. Called with pib_lock held.
107 * set_channel:
108 * Set radio for listening on specific channel.
109 * Set the device for listening on specified channel.
110 * Returns either zero, or negative errno. Called with pib_lock held.
112 * set_hw_addr_filt:
113 * Set radio for listening on specific address.
114 * Set the device for listening on specified address.
115 * Returns either zero, or negative errno.
117 struct ieee802154_ops {
118 struct module *owner;
119 int (*start)(struct ieee802154_dev *dev);
120 void (*stop)(struct ieee802154_dev *dev);
121 int (*xmit)(struct ieee802154_dev *dev,
122 struct sk_buff *skb);
123 int (*ed)(struct ieee802154_dev *dev, u8 *level);
124 int (*set_channel)(struct ieee802154_dev *dev,
125 int page,
126 int channel);
127 int (*set_hw_addr_filt)(struct ieee802154_dev *dev,
128 struct ieee802154_hw_addr_filt *filt,
129 unsigned long changed);
130 int (*ieee_addr)(struct ieee802154_dev *dev,
131 u8 addr[IEEE802154_ADDR_LEN]);
134 /* Basic interface to register ieee802154 device */
135 struct ieee802154_dev *
136 ieee802154_alloc_device(size_t priv_data_len, struct ieee802154_ops *ops);
137 void ieee802154_free_device(struct ieee802154_dev *dev);
138 int ieee802154_register_device(struct ieee802154_dev *dev);
139 void ieee802154_unregister_device(struct ieee802154_dev *dev);
141 void ieee802154_rx_irqsafe(struct ieee802154_dev *dev, struct sk_buff *skb,
142 u8 lqi);
144 #endif /* NET_MAC802154_H */