[PATCH] ibmphp: remove TRUE and FALSE
[linux/fpc-iii.git] / kernel / sys.c
blobc0fcad9f826cfc8ea10ad468fb4073bdfc902b01
1 /*
2 * linux/kernel/sys.c
4 * Copyright (C) 1991, 1992 Linus Torvalds
5 */
7 #include <linux/config.h>
8 #include <linux/module.h>
9 #include <linux/mm.h>
10 #include <linux/utsname.h>
11 #include <linux/mman.h>
12 #include <linux/smp_lock.h>
13 #include <linux/notifier.h>
14 #include <linux/reboot.h>
15 #include <linux/prctl.h>
16 #include <linux/init.h>
17 #include <linux/highuid.h>
18 #include <linux/fs.h>
19 #include <linux/kernel.h>
20 #include <linux/kexec.h>
21 #include <linux/workqueue.h>
22 #include <linux/capability.h>
23 #include <linux/device.h>
24 #include <linux/key.h>
25 #include <linux/times.h>
26 #include <linux/posix-timers.h>
27 #include <linux/security.h>
28 #include <linux/dcookies.h>
29 #include <linux/suspend.h>
30 #include <linux/tty.h>
31 #include <linux/signal.h>
32 #include <linux/cn_proc.h>
34 #include <linux/compat.h>
35 #include <linux/syscalls.h>
36 #include <linux/kprobes.h>
38 #include <asm/uaccess.h>
39 #include <asm/io.h>
40 #include <asm/unistd.h>
42 #ifndef SET_UNALIGN_CTL
43 # define SET_UNALIGN_CTL(a,b) (-EINVAL)
44 #endif
45 #ifndef GET_UNALIGN_CTL
46 # define GET_UNALIGN_CTL(a,b) (-EINVAL)
47 #endif
48 #ifndef SET_FPEMU_CTL
49 # define SET_FPEMU_CTL(a,b) (-EINVAL)
50 #endif
51 #ifndef GET_FPEMU_CTL
52 # define GET_FPEMU_CTL(a,b) (-EINVAL)
53 #endif
54 #ifndef SET_FPEXC_CTL
55 # define SET_FPEXC_CTL(a,b) (-EINVAL)
56 #endif
57 #ifndef GET_FPEXC_CTL
58 # define GET_FPEXC_CTL(a,b) (-EINVAL)
59 #endif
62 * this is where the system-wide overflow UID and GID are defined, for
63 * architectures that now have 32-bit UID/GID but didn't in the past
66 int overflowuid = DEFAULT_OVERFLOWUID;
67 int overflowgid = DEFAULT_OVERFLOWGID;
69 #ifdef CONFIG_UID16
70 EXPORT_SYMBOL(overflowuid);
71 EXPORT_SYMBOL(overflowgid);
72 #endif
75 * the same as above, but for filesystems which can only store a 16-bit
76 * UID and GID. as such, this is needed on all architectures
79 int fs_overflowuid = DEFAULT_FS_OVERFLOWUID;
80 int fs_overflowgid = DEFAULT_FS_OVERFLOWUID;
82 EXPORT_SYMBOL(fs_overflowuid);
83 EXPORT_SYMBOL(fs_overflowgid);
86 * this indicates whether you can reboot with ctrl-alt-del: the default is yes
89 int C_A_D = 1;
90 int cad_pid = 1;
93 * Notifier list for kernel code which wants to be called
94 * at shutdown. This is used to stop any idling DMA operations
95 * and the like.
98 static struct notifier_block *reboot_notifier_list;
99 static DEFINE_RWLOCK(notifier_lock);
102 * notifier_chain_register - Add notifier to a notifier chain
103 * @list: Pointer to root list pointer
104 * @n: New entry in notifier chain
106 * Adds a notifier to a notifier chain.
108 * Currently always returns zero.
111 int notifier_chain_register(struct notifier_block **list, struct notifier_block *n)
113 write_lock(&notifier_lock);
114 while(*list)
116 if(n->priority > (*list)->priority)
117 break;
118 list= &((*list)->next);
120 n->next = *list;
121 *list=n;
122 write_unlock(&notifier_lock);
123 return 0;
126 EXPORT_SYMBOL(notifier_chain_register);
129 * notifier_chain_unregister - Remove notifier from a notifier chain
130 * @nl: Pointer to root list pointer
131 * @n: New entry in notifier chain
133 * Removes a notifier from a notifier chain.
135 * Returns zero on success, or %-ENOENT on failure.
138 int notifier_chain_unregister(struct notifier_block **nl, struct notifier_block *n)
140 write_lock(&notifier_lock);
141 while((*nl)!=NULL)
143 if((*nl)==n)
145 *nl=n->next;
146 write_unlock(&notifier_lock);
147 return 0;
149 nl=&((*nl)->next);
151 write_unlock(&notifier_lock);
152 return -ENOENT;
155 EXPORT_SYMBOL(notifier_chain_unregister);
158 * notifier_call_chain - Call functions in a notifier chain
159 * @n: Pointer to root pointer of notifier chain
160 * @val: Value passed unmodified to notifier function
161 * @v: Pointer passed unmodified to notifier function
163 * Calls each function in a notifier chain in turn.
165 * If the return value of the notifier can be and'd
166 * with %NOTIFY_STOP_MASK, then notifier_call_chain
167 * will return immediately, with the return value of
168 * the notifier function which halted execution.
169 * Otherwise, the return value is the return value
170 * of the last notifier function called.
173 int __kprobes notifier_call_chain(struct notifier_block **n, unsigned long val, void *v)
175 int ret=NOTIFY_DONE;
176 struct notifier_block *nb = *n;
178 while(nb)
180 ret=nb->notifier_call(nb,val,v);
181 if(ret&NOTIFY_STOP_MASK)
183 return ret;
185 nb=nb->next;
187 return ret;
190 EXPORT_SYMBOL(notifier_call_chain);
193 * register_reboot_notifier - Register function to be called at reboot time
194 * @nb: Info about notifier function to be called
196 * Registers a function with the list of functions
197 * to be called at reboot time.
199 * Currently always returns zero, as notifier_chain_register
200 * always returns zero.
203 int register_reboot_notifier(struct notifier_block * nb)
205 return notifier_chain_register(&reboot_notifier_list, nb);
208 EXPORT_SYMBOL(register_reboot_notifier);
211 * unregister_reboot_notifier - Unregister previously registered reboot notifier
212 * @nb: Hook to be unregistered
214 * Unregisters a previously registered reboot
215 * notifier function.
217 * Returns zero on success, or %-ENOENT on failure.
220 int unregister_reboot_notifier(struct notifier_block * nb)
222 return notifier_chain_unregister(&reboot_notifier_list, nb);
225 EXPORT_SYMBOL(unregister_reboot_notifier);
227 #ifndef CONFIG_SECURITY
228 int capable(int cap)
230 if (cap_raised(current->cap_effective, cap)) {
231 current->flags |= PF_SUPERPRIV;
232 return 1;
234 return 0;
236 EXPORT_SYMBOL(capable);
237 #endif
239 static int set_one_prio(struct task_struct *p, int niceval, int error)
241 int no_nice;
243 if (p->uid != current->euid &&
244 p->euid != current->euid && !capable(CAP_SYS_NICE)) {
245 error = -EPERM;
246 goto out;
248 if (niceval < task_nice(p) && !can_nice(p, niceval)) {
249 error = -EACCES;
250 goto out;
252 no_nice = security_task_setnice(p, niceval);
253 if (no_nice) {
254 error = no_nice;
255 goto out;
257 if (error == -ESRCH)
258 error = 0;
259 set_user_nice(p, niceval);
260 out:
261 return error;
264 asmlinkage long sys_setpriority(int which, int who, int niceval)
266 struct task_struct *g, *p;
267 struct user_struct *user;
268 int error = -EINVAL;
270 if (which > 2 || which < 0)
271 goto out;
273 /* normalize: avoid signed division (rounding problems) */
274 error = -ESRCH;
275 if (niceval < -20)
276 niceval = -20;
277 if (niceval > 19)
278 niceval = 19;
280 read_lock(&tasklist_lock);
281 switch (which) {
282 case PRIO_PROCESS:
283 if (!who)
284 who = current->pid;
285 p = find_task_by_pid(who);
286 if (p)
287 error = set_one_prio(p, niceval, error);
288 break;
289 case PRIO_PGRP:
290 if (!who)
291 who = process_group(current);
292 do_each_task_pid(who, PIDTYPE_PGID, p) {
293 error = set_one_prio(p, niceval, error);
294 } while_each_task_pid(who, PIDTYPE_PGID, p);
295 break;
296 case PRIO_USER:
297 user = current->user;
298 if (!who)
299 who = current->uid;
300 else
301 if ((who != current->uid) && !(user = find_user(who)))
302 goto out_unlock; /* No processes for this user */
304 do_each_thread(g, p)
305 if (p->uid == who)
306 error = set_one_prio(p, niceval, error);
307 while_each_thread(g, p);
308 if (who != current->uid)
309 free_uid(user); /* For find_user() */
310 break;
312 out_unlock:
313 read_unlock(&tasklist_lock);
314 out:
315 return error;
319 * Ugh. To avoid negative return values, "getpriority()" will
320 * not return the normal nice-value, but a negated value that
321 * has been offset by 20 (ie it returns 40..1 instead of -20..19)
322 * to stay compatible.
324 asmlinkage long sys_getpriority(int which, int who)
326 struct task_struct *g, *p;
327 struct user_struct *user;
328 long niceval, retval = -ESRCH;
330 if (which > 2 || which < 0)
331 return -EINVAL;
333 read_lock(&tasklist_lock);
334 switch (which) {
335 case PRIO_PROCESS:
336 if (!who)
337 who = current->pid;
338 p = find_task_by_pid(who);
339 if (p) {
340 niceval = 20 - task_nice(p);
341 if (niceval > retval)
342 retval = niceval;
344 break;
345 case PRIO_PGRP:
346 if (!who)
347 who = process_group(current);
348 do_each_task_pid(who, PIDTYPE_PGID, p) {
349 niceval = 20 - task_nice(p);
350 if (niceval > retval)
351 retval = niceval;
352 } while_each_task_pid(who, PIDTYPE_PGID, p);
353 break;
354 case PRIO_USER:
355 user = current->user;
356 if (!who)
357 who = current->uid;
358 else
359 if ((who != current->uid) && !(user = find_user(who)))
360 goto out_unlock; /* No processes for this user */
362 do_each_thread(g, p)
363 if (p->uid == who) {
364 niceval = 20 - task_nice(p);
365 if (niceval > retval)
366 retval = niceval;
368 while_each_thread(g, p);
369 if (who != current->uid)
370 free_uid(user); /* for find_user() */
371 break;
373 out_unlock:
374 read_unlock(&tasklist_lock);
376 return retval;
380 * emergency_restart - reboot the system
382 * Without shutting down any hardware or taking any locks
383 * reboot the system. This is called when we know we are in
384 * trouble so this is our best effort to reboot. This is
385 * safe to call in interrupt context.
387 void emergency_restart(void)
389 machine_emergency_restart();
391 EXPORT_SYMBOL_GPL(emergency_restart);
393 void kernel_restart_prepare(char *cmd)
395 notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);
396 system_state = SYSTEM_RESTART;
397 device_shutdown();
401 * kernel_restart - reboot the system
402 * @cmd: pointer to buffer containing command to execute for restart
403 * or %NULL
405 * Shutdown everything and perform a clean reboot.
406 * This is not safe to call in interrupt context.
408 void kernel_restart(char *cmd)
410 kernel_restart_prepare(cmd);
411 if (!cmd) {
412 printk(KERN_EMERG "Restarting system.\n");
413 } else {
414 printk(KERN_EMERG "Restarting system with command '%s'.\n", cmd);
416 printk(".\n");
417 machine_restart(cmd);
419 EXPORT_SYMBOL_GPL(kernel_restart);
422 * kernel_kexec - reboot the system
424 * Move into place and start executing a preloaded standalone
425 * executable. If nothing was preloaded return an error.
427 void kernel_kexec(void)
429 #ifdef CONFIG_KEXEC
430 struct kimage *image;
431 image = xchg(&kexec_image, NULL);
432 if (!image) {
433 return;
435 kernel_restart_prepare(NULL);
436 printk(KERN_EMERG "Starting new kernel\n");
437 machine_shutdown();
438 machine_kexec(image);
439 #endif
441 EXPORT_SYMBOL_GPL(kernel_kexec);
443 void kernel_shutdown_prepare(enum system_states state)
445 notifier_call_chain(&reboot_notifier_list,
446 (state == SYSTEM_HALT)?SYS_HALT:SYS_POWER_OFF, NULL);
447 system_state = state;
448 device_shutdown();
451 * kernel_halt - halt the system
453 * Shutdown everything and perform a clean system halt.
455 void kernel_halt(void)
457 kernel_shutdown_prepare(SYSTEM_HALT);
458 printk(KERN_EMERG "System halted.\n");
459 machine_halt();
462 EXPORT_SYMBOL_GPL(kernel_halt);
465 * kernel_power_off - power_off the system
467 * Shutdown everything and perform a clean system power_off.
469 void kernel_power_off(void)
471 kernel_shutdown_prepare(SYSTEM_POWER_OFF);
472 printk(KERN_EMERG "Power down.\n");
473 machine_power_off();
475 EXPORT_SYMBOL_GPL(kernel_power_off);
477 * Reboot system call: for obvious reasons only root may call it,
478 * and even root needs to set up some magic numbers in the registers
479 * so that some mistake won't make this reboot the whole machine.
480 * You can also set the meaning of the ctrl-alt-del-key here.
482 * reboot doesn't sync: do that yourself before calling this.
484 asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd, void __user * arg)
486 char buffer[256];
488 /* We only trust the superuser with rebooting the system. */
489 if (!capable(CAP_SYS_BOOT))
490 return -EPERM;
492 /* For safety, we require "magic" arguments. */
493 if (magic1 != LINUX_REBOOT_MAGIC1 ||
494 (magic2 != LINUX_REBOOT_MAGIC2 &&
495 magic2 != LINUX_REBOOT_MAGIC2A &&
496 magic2 != LINUX_REBOOT_MAGIC2B &&
497 magic2 != LINUX_REBOOT_MAGIC2C))
498 return -EINVAL;
500 /* Instead of trying to make the power_off code look like
501 * halt when pm_power_off is not set do it the easy way.
503 if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
504 cmd = LINUX_REBOOT_CMD_HALT;
506 lock_kernel();
507 switch (cmd) {
508 case LINUX_REBOOT_CMD_RESTART:
509 kernel_restart(NULL);
510 break;
512 case LINUX_REBOOT_CMD_CAD_ON:
513 C_A_D = 1;
514 break;
516 case LINUX_REBOOT_CMD_CAD_OFF:
517 C_A_D = 0;
518 break;
520 case LINUX_REBOOT_CMD_HALT:
521 kernel_halt();
522 unlock_kernel();
523 do_exit(0);
524 break;
526 case LINUX_REBOOT_CMD_POWER_OFF:
527 kernel_power_off();
528 unlock_kernel();
529 do_exit(0);
530 break;
532 case LINUX_REBOOT_CMD_RESTART2:
533 if (strncpy_from_user(&buffer[0], arg, sizeof(buffer) - 1) < 0) {
534 unlock_kernel();
535 return -EFAULT;
537 buffer[sizeof(buffer) - 1] = '\0';
539 kernel_restart(buffer);
540 break;
542 case LINUX_REBOOT_CMD_KEXEC:
543 kernel_kexec();
544 unlock_kernel();
545 return -EINVAL;
547 #ifdef CONFIG_SOFTWARE_SUSPEND
548 case LINUX_REBOOT_CMD_SW_SUSPEND:
550 int ret = software_suspend();
551 unlock_kernel();
552 return ret;
554 #endif
556 default:
557 unlock_kernel();
558 return -EINVAL;
560 unlock_kernel();
561 return 0;
564 static void deferred_cad(void *dummy)
566 kernel_restart(NULL);
570 * This function gets called by ctrl-alt-del - ie the keyboard interrupt.
571 * As it's called within an interrupt, it may NOT sync: the only choice
572 * is whether to reboot at once, or just ignore the ctrl-alt-del.
574 void ctrl_alt_del(void)
576 static DECLARE_WORK(cad_work, deferred_cad, NULL);
578 if (C_A_D)
579 schedule_work(&cad_work);
580 else
581 kill_proc(cad_pid, SIGINT, 1);
586 * Unprivileged users may change the real gid to the effective gid
587 * or vice versa. (BSD-style)
589 * If you set the real gid at all, or set the effective gid to a value not
590 * equal to the real gid, then the saved gid is set to the new effective gid.
592 * This makes it possible for a setgid program to completely drop its
593 * privileges, which is often a useful assertion to make when you are doing
594 * a security audit over a program.
596 * The general idea is that a program which uses just setregid() will be
597 * 100% compatible with BSD. A program which uses just setgid() will be
598 * 100% compatible with POSIX with saved IDs.
600 * SMP: There are not races, the GIDs are checked only by filesystem
601 * operations (as far as semantic preservation is concerned).
603 asmlinkage long sys_setregid(gid_t rgid, gid_t egid)
605 int old_rgid = current->gid;
606 int old_egid = current->egid;
607 int new_rgid = old_rgid;
608 int new_egid = old_egid;
609 int retval;
611 retval = security_task_setgid(rgid, egid, (gid_t)-1, LSM_SETID_RE);
612 if (retval)
613 return retval;
615 if (rgid != (gid_t) -1) {
616 if ((old_rgid == rgid) ||
617 (current->egid==rgid) ||
618 capable(CAP_SETGID))
619 new_rgid = rgid;
620 else
621 return -EPERM;
623 if (egid != (gid_t) -1) {
624 if ((old_rgid == egid) ||
625 (current->egid == egid) ||
626 (current->sgid == egid) ||
627 capable(CAP_SETGID))
628 new_egid = egid;
629 else {
630 return -EPERM;
633 if (new_egid != old_egid)
635 current->mm->dumpable = suid_dumpable;
636 smp_wmb();
638 if (rgid != (gid_t) -1 ||
639 (egid != (gid_t) -1 && egid != old_rgid))
640 current->sgid = new_egid;
641 current->fsgid = new_egid;
642 current->egid = new_egid;
643 current->gid = new_rgid;
644 key_fsgid_changed(current);
645 proc_id_connector(current, PROC_EVENT_GID);
646 return 0;
650 * setgid() is implemented like SysV w/ SAVED_IDS
652 * SMP: Same implicit races as above.
654 asmlinkage long sys_setgid(gid_t gid)
656 int old_egid = current->egid;
657 int retval;
659 retval = security_task_setgid(gid, (gid_t)-1, (gid_t)-1, LSM_SETID_ID);
660 if (retval)
661 return retval;
663 if (capable(CAP_SETGID))
665 if(old_egid != gid)
667 current->mm->dumpable = suid_dumpable;
668 smp_wmb();
670 current->gid = current->egid = current->sgid = current->fsgid = gid;
672 else if ((gid == current->gid) || (gid == current->sgid))
674 if(old_egid != gid)
676 current->mm->dumpable = suid_dumpable;
677 smp_wmb();
679 current->egid = current->fsgid = gid;
681 else
682 return -EPERM;
684 key_fsgid_changed(current);
685 proc_id_connector(current, PROC_EVENT_GID);
686 return 0;
689 static int set_user(uid_t new_ruid, int dumpclear)
691 struct user_struct *new_user;
693 new_user = alloc_uid(new_ruid);
694 if (!new_user)
695 return -EAGAIN;
697 if (atomic_read(&new_user->processes) >=
698 current->signal->rlim[RLIMIT_NPROC].rlim_cur &&
699 new_user != &root_user) {
700 free_uid(new_user);
701 return -EAGAIN;
704 switch_uid(new_user);
706 if(dumpclear)
708 current->mm->dumpable = suid_dumpable;
709 smp_wmb();
711 current->uid = new_ruid;
712 return 0;
716 * Unprivileged users may change the real uid to the effective uid
717 * or vice versa. (BSD-style)
719 * If you set the real uid at all, or set the effective uid to a value not
720 * equal to the real uid, then the saved uid is set to the new effective uid.
722 * This makes it possible for a setuid program to completely drop its
723 * privileges, which is often a useful assertion to make when you are doing
724 * a security audit over a program.
726 * The general idea is that a program which uses just setreuid() will be
727 * 100% compatible with BSD. A program which uses just setuid() will be
728 * 100% compatible with POSIX with saved IDs.
730 asmlinkage long sys_setreuid(uid_t ruid, uid_t euid)
732 int old_ruid, old_euid, old_suid, new_ruid, new_euid;
733 int retval;
735 retval = security_task_setuid(ruid, euid, (uid_t)-1, LSM_SETID_RE);
736 if (retval)
737 return retval;
739 new_ruid = old_ruid = current->uid;
740 new_euid = old_euid = current->euid;
741 old_suid = current->suid;
743 if (ruid != (uid_t) -1) {
744 new_ruid = ruid;
745 if ((old_ruid != ruid) &&
746 (current->euid != ruid) &&
747 !capable(CAP_SETUID))
748 return -EPERM;
751 if (euid != (uid_t) -1) {
752 new_euid = euid;
753 if ((old_ruid != euid) &&
754 (current->euid != euid) &&
755 (current->suid != euid) &&
756 !capable(CAP_SETUID))
757 return -EPERM;
760 if (new_ruid != old_ruid && set_user(new_ruid, new_euid != old_euid) < 0)
761 return -EAGAIN;
763 if (new_euid != old_euid)
765 current->mm->dumpable = suid_dumpable;
766 smp_wmb();
768 current->fsuid = current->euid = new_euid;
769 if (ruid != (uid_t) -1 ||
770 (euid != (uid_t) -1 && euid != old_ruid))
771 current->suid = current->euid;
772 current->fsuid = current->euid;
774 key_fsuid_changed(current);
775 proc_id_connector(current, PROC_EVENT_UID);
777 return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_RE);
783 * setuid() is implemented like SysV with SAVED_IDS
785 * Note that SAVED_ID's is deficient in that a setuid root program
786 * like sendmail, for example, cannot set its uid to be a normal
787 * user and then switch back, because if you're root, setuid() sets
788 * the saved uid too. If you don't like this, blame the bright people
789 * in the POSIX committee and/or USG. Note that the BSD-style setreuid()
790 * will allow a root program to temporarily drop privileges and be able to
791 * regain them by swapping the real and effective uid.
793 asmlinkage long sys_setuid(uid_t uid)
795 int old_euid = current->euid;
796 int old_ruid, old_suid, new_ruid, new_suid;
797 int retval;
799 retval = security_task_setuid(uid, (uid_t)-1, (uid_t)-1, LSM_SETID_ID);
800 if (retval)
801 return retval;
803 old_ruid = new_ruid = current->uid;
804 old_suid = current->suid;
805 new_suid = old_suid;
807 if (capable(CAP_SETUID)) {
808 if (uid != old_ruid && set_user(uid, old_euid != uid) < 0)
809 return -EAGAIN;
810 new_suid = uid;
811 } else if ((uid != current->uid) && (uid != new_suid))
812 return -EPERM;
814 if (old_euid != uid)
816 current->mm->dumpable = suid_dumpable;
817 smp_wmb();
819 current->fsuid = current->euid = uid;
820 current->suid = new_suid;
822 key_fsuid_changed(current);
823 proc_id_connector(current, PROC_EVENT_UID);
825 return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_ID);
830 * This function implements a generic ability to update ruid, euid,
831 * and suid. This allows you to implement the 4.4 compatible seteuid().
833 asmlinkage long sys_setresuid(uid_t ruid, uid_t euid, uid_t suid)
835 int old_ruid = current->uid;
836 int old_euid = current->euid;
837 int old_suid = current->suid;
838 int retval;
840 retval = security_task_setuid(ruid, euid, suid, LSM_SETID_RES);
841 if (retval)
842 return retval;
844 if (!capable(CAP_SETUID)) {
845 if ((ruid != (uid_t) -1) && (ruid != current->uid) &&
846 (ruid != current->euid) && (ruid != current->suid))
847 return -EPERM;
848 if ((euid != (uid_t) -1) && (euid != current->uid) &&
849 (euid != current->euid) && (euid != current->suid))
850 return -EPERM;
851 if ((suid != (uid_t) -1) && (suid != current->uid) &&
852 (suid != current->euid) && (suid != current->suid))
853 return -EPERM;
855 if (ruid != (uid_t) -1) {
856 if (ruid != current->uid && set_user(ruid, euid != current->euid) < 0)
857 return -EAGAIN;
859 if (euid != (uid_t) -1) {
860 if (euid != current->euid)
862 current->mm->dumpable = suid_dumpable;
863 smp_wmb();
865 current->euid = euid;
867 current->fsuid = current->euid;
868 if (suid != (uid_t) -1)
869 current->suid = suid;
871 key_fsuid_changed(current);
872 proc_id_connector(current, PROC_EVENT_UID);
874 return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_RES);
877 asmlinkage long sys_getresuid(uid_t __user *ruid, uid_t __user *euid, uid_t __user *suid)
879 int retval;
881 if (!(retval = put_user(current->uid, ruid)) &&
882 !(retval = put_user(current->euid, euid)))
883 retval = put_user(current->suid, suid);
885 return retval;
889 * Same as above, but for rgid, egid, sgid.
891 asmlinkage long sys_setresgid(gid_t rgid, gid_t egid, gid_t sgid)
893 int retval;
895 retval = security_task_setgid(rgid, egid, sgid, LSM_SETID_RES);
896 if (retval)
897 return retval;
899 if (!capable(CAP_SETGID)) {
900 if ((rgid != (gid_t) -1) && (rgid != current->gid) &&
901 (rgid != current->egid) && (rgid != current->sgid))
902 return -EPERM;
903 if ((egid != (gid_t) -1) && (egid != current->gid) &&
904 (egid != current->egid) && (egid != current->sgid))
905 return -EPERM;
906 if ((sgid != (gid_t) -1) && (sgid != current->gid) &&
907 (sgid != current->egid) && (sgid != current->sgid))
908 return -EPERM;
910 if (egid != (gid_t) -1) {
911 if (egid != current->egid)
913 current->mm->dumpable = suid_dumpable;
914 smp_wmb();
916 current->egid = egid;
918 current->fsgid = current->egid;
919 if (rgid != (gid_t) -1)
920 current->gid = rgid;
921 if (sgid != (gid_t) -1)
922 current->sgid = sgid;
924 key_fsgid_changed(current);
925 proc_id_connector(current, PROC_EVENT_GID);
926 return 0;
929 asmlinkage long sys_getresgid(gid_t __user *rgid, gid_t __user *egid, gid_t __user *sgid)
931 int retval;
933 if (!(retval = put_user(current->gid, rgid)) &&
934 !(retval = put_user(current->egid, egid)))
935 retval = put_user(current->sgid, sgid);
937 return retval;
942 * "setfsuid()" sets the fsuid - the uid used for filesystem checks. This
943 * is used for "access()" and for the NFS daemon (letting nfsd stay at
944 * whatever uid it wants to). It normally shadows "euid", except when
945 * explicitly set by setfsuid() or for access..
947 asmlinkage long sys_setfsuid(uid_t uid)
949 int old_fsuid;
951 old_fsuid = current->fsuid;
952 if (security_task_setuid(uid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS))
953 return old_fsuid;
955 if (uid == current->uid || uid == current->euid ||
956 uid == current->suid || uid == current->fsuid ||
957 capable(CAP_SETUID))
959 if (uid != old_fsuid)
961 current->mm->dumpable = suid_dumpable;
962 smp_wmb();
964 current->fsuid = uid;
967 key_fsuid_changed(current);
968 proc_id_connector(current, PROC_EVENT_UID);
970 security_task_post_setuid(old_fsuid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS);
972 return old_fsuid;
976 * Samma på svenska..
978 asmlinkage long sys_setfsgid(gid_t gid)
980 int old_fsgid;
982 old_fsgid = current->fsgid;
983 if (security_task_setgid(gid, (gid_t)-1, (gid_t)-1, LSM_SETID_FS))
984 return old_fsgid;
986 if (gid == current->gid || gid == current->egid ||
987 gid == current->sgid || gid == current->fsgid ||
988 capable(CAP_SETGID))
990 if (gid != old_fsgid)
992 current->mm->dumpable = suid_dumpable;
993 smp_wmb();
995 current->fsgid = gid;
996 key_fsgid_changed(current);
997 proc_id_connector(current, PROC_EVENT_GID);
999 return old_fsgid;
1002 asmlinkage long sys_times(struct tms __user * tbuf)
1005 * In the SMP world we might just be unlucky and have one of
1006 * the times increment as we use it. Since the value is an
1007 * atomically safe type this is just fine. Conceptually its
1008 * as if the syscall took an instant longer to occur.
1010 if (tbuf) {
1011 struct tms tmp;
1012 cputime_t utime, stime, cutime, cstime;
1014 #ifdef CONFIG_SMP
1015 if (thread_group_empty(current)) {
1017 * Single thread case without the use of any locks.
1019 * We may race with release_task if two threads are
1020 * executing. However, release task first adds up the
1021 * counters (__exit_signal) before removing the task
1022 * from the process tasklist (__unhash_process).
1023 * __exit_signal also acquires and releases the
1024 * siglock which results in the proper memory ordering
1025 * so that the list modifications are always visible
1026 * after the counters have been updated.
1028 * If the counters have been updated by the second thread
1029 * but the thread has not yet been removed from the list
1030 * then the other branch will be executing which will
1031 * block on tasklist_lock until the exit handling of the
1032 * other task is finished.
1034 * This also implies that the sighand->siglock cannot
1035 * be held by another processor. So we can also
1036 * skip acquiring that lock.
1038 utime = cputime_add(current->signal->utime, current->utime);
1039 stime = cputime_add(current->signal->utime, current->stime);
1040 cutime = current->signal->cutime;
1041 cstime = current->signal->cstime;
1042 } else
1043 #endif
1046 /* Process with multiple threads */
1047 struct task_struct *tsk = current;
1048 struct task_struct *t;
1050 read_lock(&tasklist_lock);
1051 utime = tsk->signal->utime;
1052 stime = tsk->signal->stime;
1053 t = tsk;
1054 do {
1055 utime = cputime_add(utime, t->utime);
1056 stime = cputime_add(stime, t->stime);
1057 t = next_thread(t);
1058 } while (t != tsk);
1061 * While we have tasklist_lock read-locked, no dying thread
1062 * can be updating current->signal->[us]time. Instead,
1063 * we got their counts included in the live thread loop.
1064 * However, another thread can come in right now and
1065 * do a wait call that updates current->signal->c[us]time.
1066 * To make sure we always see that pair updated atomically,
1067 * we take the siglock around fetching them.
1069 spin_lock_irq(&tsk->sighand->siglock);
1070 cutime = tsk->signal->cutime;
1071 cstime = tsk->signal->cstime;
1072 spin_unlock_irq(&tsk->sighand->siglock);
1073 read_unlock(&tasklist_lock);
1075 tmp.tms_utime = cputime_to_clock_t(utime);
1076 tmp.tms_stime = cputime_to_clock_t(stime);
1077 tmp.tms_cutime = cputime_to_clock_t(cutime);
1078 tmp.tms_cstime = cputime_to_clock_t(cstime);
1079 if (copy_to_user(tbuf, &tmp, sizeof(struct tms)))
1080 return -EFAULT;
1082 return (long) jiffies_64_to_clock_t(get_jiffies_64());
1086 * This needs some heavy checking ...
1087 * I just haven't the stomach for it. I also don't fully
1088 * understand sessions/pgrp etc. Let somebody who does explain it.
1090 * OK, I think I have the protection semantics right.... this is really
1091 * only important on a multi-user system anyway, to make sure one user
1092 * can't send a signal to a process owned by another. -TYT, 12/12/91
1094 * Auch. Had to add the 'did_exec' flag to conform completely to POSIX.
1095 * LBT 04.03.94
1098 asmlinkage long sys_setpgid(pid_t pid, pid_t pgid)
1100 struct task_struct *p;
1101 struct task_struct *group_leader = current->group_leader;
1102 int err = -EINVAL;
1104 if (!pid)
1105 pid = group_leader->pid;
1106 if (!pgid)
1107 pgid = pid;
1108 if (pgid < 0)
1109 return -EINVAL;
1111 /* From this point forward we keep holding onto the tasklist lock
1112 * so that our parent does not change from under us. -DaveM
1114 write_lock_irq(&tasklist_lock);
1116 err = -ESRCH;
1117 p = find_task_by_pid(pid);
1118 if (!p)
1119 goto out;
1121 err = -EINVAL;
1122 if (!thread_group_leader(p))
1123 goto out;
1125 if (p->real_parent == group_leader) {
1126 err = -EPERM;
1127 if (p->signal->session != group_leader->signal->session)
1128 goto out;
1129 err = -EACCES;
1130 if (p->did_exec)
1131 goto out;
1132 } else {
1133 err = -ESRCH;
1134 if (p != group_leader)
1135 goto out;
1138 err = -EPERM;
1139 if (p->signal->leader)
1140 goto out;
1142 if (pgid != pid) {
1143 struct task_struct *p;
1145 do_each_task_pid(pgid, PIDTYPE_PGID, p) {
1146 if (p->signal->session == group_leader->signal->session)
1147 goto ok_pgid;
1148 } while_each_task_pid(pgid, PIDTYPE_PGID, p);
1149 goto out;
1152 ok_pgid:
1153 err = security_task_setpgid(p, pgid);
1154 if (err)
1155 goto out;
1157 if (process_group(p) != pgid) {
1158 detach_pid(p, PIDTYPE_PGID);
1159 p->signal->pgrp = pgid;
1160 attach_pid(p, PIDTYPE_PGID, pgid);
1163 err = 0;
1164 out:
1165 /* All paths lead to here, thus we are safe. -DaveM */
1166 write_unlock_irq(&tasklist_lock);
1167 return err;
1170 asmlinkage long sys_getpgid(pid_t pid)
1172 if (!pid) {
1173 return process_group(current);
1174 } else {
1175 int retval;
1176 struct task_struct *p;
1178 read_lock(&tasklist_lock);
1179 p = find_task_by_pid(pid);
1181 retval = -ESRCH;
1182 if (p) {
1183 retval = security_task_getpgid(p);
1184 if (!retval)
1185 retval = process_group(p);
1187 read_unlock(&tasklist_lock);
1188 return retval;
1192 #ifdef __ARCH_WANT_SYS_GETPGRP
1194 asmlinkage long sys_getpgrp(void)
1196 /* SMP - assuming writes are word atomic this is fine */
1197 return process_group(current);
1200 #endif
1202 asmlinkage long sys_getsid(pid_t pid)
1204 if (!pid) {
1205 return current->signal->session;
1206 } else {
1207 int retval;
1208 struct task_struct *p;
1210 read_lock(&tasklist_lock);
1211 p = find_task_by_pid(pid);
1213 retval = -ESRCH;
1214 if(p) {
1215 retval = security_task_getsid(p);
1216 if (!retval)
1217 retval = p->signal->session;
1219 read_unlock(&tasklist_lock);
1220 return retval;
1224 asmlinkage long sys_setsid(void)
1226 struct task_struct *group_leader = current->group_leader;
1227 struct pid *pid;
1228 int err = -EPERM;
1230 mutex_lock(&tty_mutex);
1231 write_lock_irq(&tasklist_lock);
1233 pid = find_pid(PIDTYPE_PGID, group_leader->pid);
1234 if (pid)
1235 goto out;
1237 group_leader->signal->leader = 1;
1238 __set_special_pids(group_leader->pid, group_leader->pid);
1239 group_leader->signal->tty = NULL;
1240 group_leader->signal->tty_old_pgrp = 0;
1241 err = process_group(group_leader);
1242 out:
1243 write_unlock_irq(&tasklist_lock);
1244 mutex_unlock(&tty_mutex);
1245 return err;
1249 * Supplementary group IDs
1252 /* init to 2 - one for init_task, one to ensure it is never freed */
1253 struct group_info init_groups = { .usage = ATOMIC_INIT(2) };
1255 struct group_info *groups_alloc(int gidsetsize)
1257 struct group_info *group_info;
1258 int nblocks;
1259 int i;
1261 nblocks = (gidsetsize + NGROUPS_PER_BLOCK - 1) / NGROUPS_PER_BLOCK;
1262 /* Make sure we always allocate at least one indirect block pointer */
1263 nblocks = nblocks ? : 1;
1264 group_info = kmalloc(sizeof(*group_info) + nblocks*sizeof(gid_t *), GFP_USER);
1265 if (!group_info)
1266 return NULL;
1267 group_info->ngroups = gidsetsize;
1268 group_info->nblocks = nblocks;
1269 atomic_set(&group_info->usage, 1);
1271 if (gidsetsize <= NGROUPS_SMALL) {
1272 group_info->blocks[0] = group_info->small_block;
1273 } else {
1274 for (i = 0; i < nblocks; i++) {
1275 gid_t *b;
1276 b = (void *)__get_free_page(GFP_USER);
1277 if (!b)
1278 goto out_undo_partial_alloc;
1279 group_info->blocks[i] = b;
1282 return group_info;
1284 out_undo_partial_alloc:
1285 while (--i >= 0) {
1286 free_page((unsigned long)group_info->blocks[i]);
1288 kfree(group_info);
1289 return NULL;
1292 EXPORT_SYMBOL(groups_alloc);
1294 void groups_free(struct group_info *group_info)
1296 if (group_info->blocks[0] != group_info->small_block) {
1297 int i;
1298 for (i = 0; i < group_info->nblocks; i++)
1299 free_page((unsigned long)group_info->blocks[i]);
1301 kfree(group_info);
1304 EXPORT_SYMBOL(groups_free);
1306 /* export the group_info to a user-space array */
1307 static int groups_to_user(gid_t __user *grouplist,
1308 struct group_info *group_info)
1310 int i;
1311 int count = group_info->ngroups;
1313 for (i = 0; i < group_info->nblocks; i++) {
1314 int cp_count = min(NGROUPS_PER_BLOCK, count);
1315 int off = i * NGROUPS_PER_BLOCK;
1316 int len = cp_count * sizeof(*grouplist);
1318 if (copy_to_user(grouplist+off, group_info->blocks[i], len))
1319 return -EFAULT;
1321 count -= cp_count;
1323 return 0;
1326 /* fill a group_info from a user-space array - it must be allocated already */
1327 static int groups_from_user(struct group_info *group_info,
1328 gid_t __user *grouplist)
1330 int i;
1331 int count = group_info->ngroups;
1333 for (i = 0; i < group_info->nblocks; i++) {
1334 int cp_count = min(NGROUPS_PER_BLOCK, count);
1335 int off = i * NGROUPS_PER_BLOCK;
1336 int len = cp_count * sizeof(*grouplist);
1338 if (copy_from_user(group_info->blocks[i], grouplist+off, len))
1339 return -EFAULT;
1341 count -= cp_count;
1343 return 0;
1346 /* a simple Shell sort */
1347 static void groups_sort(struct group_info *group_info)
1349 int base, max, stride;
1350 int gidsetsize = group_info->ngroups;
1352 for (stride = 1; stride < gidsetsize; stride = 3 * stride + 1)
1353 ; /* nothing */
1354 stride /= 3;
1356 while (stride) {
1357 max = gidsetsize - stride;
1358 for (base = 0; base < max; base++) {
1359 int left = base;
1360 int right = left + stride;
1361 gid_t tmp = GROUP_AT(group_info, right);
1363 while (left >= 0 && GROUP_AT(group_info, left) > tmp) {
1364 GROUP_AT(group_info, right) =
1365 GROUP_AT(group_info, left);
1366 right = left;
1367 left -= stride;
1369 GROUP_AT(group_info, right) = tmp;
1371 stride /= 3;
1375 /* a simple bsearch */
1376 int groups_search(struct group_info *group_info, gid_t grp)
1378 int left, right;
1380 if (!group_info)
1381 return 0;
1383 left = 0;
1384 right = group_info->ngroups;
1385 while (left < right) {
1386 int mid = (left+right)/2;
1387 int cmp = grp - GROUP_AT(group_info, mid);
1388 if (cmp > 0)
1389 left = mid + 1;
1390 else if (cmp < 0)
1391 right = mid;
1392 else
1393 return 1;
1395 return 0;
1398 /* validate and set current->group_info */
1399 int set_current_groups(struct group_info *group_info)
1401 int retval;
1402 struct group_info *old_info;
1404 retval = security_task_setgroups(group_info);
1405 if (retval)
1406 return retval;
1408 groups_sort(group_info);
1409 get_group_info(group_info);
1411 task_lock(current);
1412 old_info = current->group_info;
1413 current->group_info = group_info;
1414 task_unlock(current);
1416 put_group_info(old_info);
1418 return 0;
1421 EXPORT_SYMBOL(set_current_groups);
1423 asmlinkage long sys_getgroups(int gidsetsize, gid_t __user *grouplist)
1425 int i = 0;
1428 * SMP: Nobody else can change our grouplist. Thus we are
1429 * safe.
1432 if (gidsetsize < 0)
1433 return -EINVAL;
1435 /* no need to grab task_lock here; it cannot change */
1436 get_group_info(current->group_info);
1437 i = current->group_info->ngroups;
1438 if (gidsetsize) {
1439 if (i > gidsetsize) {
1440 i = -EINVAL;
1441 goto out;
1443 if (groups_to_user(grouplist, current->group_info)) {
1444 i = -EFAULT;
1445 goto out;
1448 out:
1449 put_group_info(current->group_info);
1450 return i;
1454 * SMP: Our groups are copy-on-write. We can set them safely
1455 * without another task interfering.
1458 asmlinkage long sys_setgroups(int gidsetsize, gid_t __user *grouplist)
1460 struct group_info *group_info;
1461 int retval;
1463 if (!capable(CAP_SETGID))
1464 return -EPERM;
1465 if ((unsigned)gidsetsize > NGROUPS_MAX)
1466 return -EINVAL;
1468 group_info = groups_alloc(gidsetsize);
1469 if (!group_info)
1470 return -ENOMEM;
1471 retval = groups_from_user(group_info, grouplist);
1472 if (retval) {
1473 put_group_info(group_info);
1474 return retval;
1477 retval = set_current_groups(group_info);
1478 put_group_info(group_info);
1480 return retval;
1484 * Check whether we're fsgid/egid or in the supplemental group..
1486 int in_group_p(gid_t grp)
1488 int retval = 1;
1489 if (grp != current->fsgid) {
1490 get_group_info(current->group_info);
1491 retval = groups_search(current->group_info, grp);
1492 put_group_info(current->group_info);
1494 return retval;
1497 EXPORT_SYMBOL(in_group_p);
1499 int in_egroup_p(gid_t grp)
1501 int retval = 1;
1502 if (grp != current->egid) {
1503 get_group_info(current->group_info);
1504 retval = groups_search(current->group_info, grp);
1505 put_group_info(current->group_info);
1507 return retval;
1510 EXPORT_SYMBOL(in_egroup_p);
1512 DECLARE_RWSEM(uts_sem);
1514 EXPORT_SYMBOL(uts_sem);
1516 asmlinkage long sys_newuname(struct new_utsname __user * name)
1518 int errno = 0;
1520 down_read(&uts_sem);
1521 if (copy_to_user(name,&system_utsname,sizeof *name))
1522 errno = -EFAULT;
1523 up_read(&uts_sem);
1524 return errno;
1527 asmlinkage long sys_sethostname(char __user *name, int len)
1529 int errno;
1530 char tmp[__NEW_UTS_LEN];
1532 if (!capable(CAP_SYS_ADMIN))
1533 return -EPERM;
1534 if (len < 0 || len > __NEW_UTS_LEN)
1535 return -EINVAL;
1536 down_write(&uts_sem);
1537 errno = -EFAULT;
1538 if (!copy_from_user(tmp, name, len)) {
1539 memcpy(system_utsname.nodename, tmp, len);
1540 system_utsname.nodename[len] = 0;
1541 errno = 0;
1543 up_write(&uts_sem);
1544 return errno;
1547 #ifdef __ARCH_WANT_SYS_GETHOSTNAME
1549 asmlinkage long sys_gethostname(char __user *name, int len)
1551 int i, errno;
1553 if (len < 0)
1554 return -EINVAL;
1555 down_read(&uts_sem);
1556 i = 1 + strlen(system_utsname.nodename);
1557 if (i > len)
1558 i = len;
1559 errno = 0;
1560 if (copy_to_user(name, system_utsname.nodename, i))
1561 errno = -EFAULT;
1562 up_read(&uts_sem);
1563 return errno;
1566 #endif
1569 * Only setdomainname; getdomainname can be implemented by calling
1570 * uname()
1572 asmlinkage long sys_setdomainname(char __user *name, int len)
1574 int errno;
1575 char tmp[__NEW_UTS_LEN];
1577 if (!capable(CAP_SYS_ADMIN))
1578 return -EPERM;
1579 if (len < 0 || len > __NEW_UTS_LEN)
1580 return -EINVAL;
1582 down_write(&uts_sem);
1583 errno = -EFAULT;
1584 if (!copy_from_user(tmp, name, len)) {
1585 memcpy(system_utsname.domainname, tmp, len);
1586 system_utsname.domainname[len] = 0;
1587 errno = 0;
1589 up_write(&uts_sem);
1590 return errno;
1593 asmlinkage long sys_getrlimit(unsigned int resource, struct rlimit __user *rlim)
1595 if (resource >= RLIM_NLIMITS)
1596 return -EINVAL;
1597 else {
1598 struct rlimit value;
1599 task_lock(current->group_leader);
1600 value = current->signal->rlim[resource];
1601 task_unlock(current->group_leader);
1602 return copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;
1606 #ifdef __ARCH_WANT_SYS_OLD_GETRLIMIT
1609 * Back compatibility for getrlimit. Needed for some apps.
1612 asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim)
1614 struct rlimit x;
1615 if (resource >= RLIM_NLIMITS)
1616 return -EINVAL;
1618 task_lock(current->group_leader);
1619 x = current->signal->rlim[resource];
1620 task_unlock(current->group_leader);
1621 if(x.rlim_cur > 0x7FFFFFFF)
1622 x.rlim_cur = 0x7FFFFFFF;
1623 if(x.rlim_max > 0x7FFFFFFF)
1624 x.rlim_max = 0x7FFFFFFF;
1625 return copy_to_user(rlim, &x, sizeof(x))?-EFAULT:0;
1628 #endif
1630 asmlinkage long sys_setrlimit(unsigned int resource, struct rlimit __user *rlim)
1632 struct rlimit new_rlim, *old_rlim;
1633 int retval;
1635 if (resource >= RLIM_NLIMITS)
1636 return -EINVAL;
1637 if(copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
1638 return -EFAULT;
1639 if (new_rlim.rlim_cur > new_rlim.rlim_max)
1640 return -EINVAL;
1641 old_rlim = current->signal->rlim + resource;
1642 if ((new_rlim.rlim_max > old_rlim->rlim_max) &&
1643 !capable(CAP_SYS_RESOURCE))
1644 return -EPERM;
1645 if (resource == RLIMIT_NOFILE && new_rlim.rlim_max > NR_OPEN)
1646 return -EPERM;
1648 retval = security_task_setrlimit(resource, &new_rlim);
1649 if (retval)
1650 return retval;
1652 task_lock(current->group_leader);
1653 *old_rlim = new_rlim;
1654 task_unlock(current->group_leader);
1656 if (resource == RLIMIT_CPU && new_rlim.rlim_cur != RLIM_INFINITY &&
1657 (cputime_eq(current->signal->it_prof_expires, cputime_zero) ||
1658 new_rlim.rlim_cur <= cputime_to_secs(
1659 current->signal->it_prof_expires))) {
1660 cputime_t cputime = secs_to_cputime(new_rlim.rlim_cur);
1661 read_lock(&tasklist_lock);
1662 spin_lock_irq(&current->sighand->siglock);
1663 set_process_cpu_timer(current, CPUCLOCK_PROF,
1664 &cputime, NULL);
1665 spin_unlock_irq(&current->sighand->siglock);
1666 read_unlock(&tasklist_lock);
1669 return 0;
1673 * It would make sense to put struct rusage in the task_struct,
1674 * except that would make the task_struct be *really big*. After
1675 * task_struct gets moved into malloc'ed memory, it would
1676 * make sense to do this. It will make moving the rest of the information
1677 * a lot simpler! (Which we're not doing right now because we're not
1678 * measuring them yet).
1680 * When sampling multiple threads for RUSAGE_SELF, under SMP we might have
1681 * races with threads incrementing their own counters. But since word
1682 * reads are atomic, we either get new values or old values and we don't
1683 * care which for the sums. We always take the siglock to protect reading
1684 * the c* fields from p->signal from races with exit.c updating those
1685 * fields when reaping, so a sample either gets all the additions of a
1686 * given child after it's reaped, or none so this sample is before reaping.
1688 * tasklist_lock locking optimisation:
1689 * If we are current and single threaded, we do not need to take the tasklist
1690 * lock or the siglock. No one else can take our signal_struct away,
1691 * no one else can reap the children to update signal->c* counters, and
1692 * no one else can race with the signal-> fields.
1693 * If we do not take the tasklist_lock, the signal-> fields could be read
1694 * out of order while another thread was just exiting. So we place a
1695 * read memory barrier when we avoid the lock. On the writer side,
1696 * write memory barrier is implied in __exit_signal as __exit_signal releases
1697 * the siglock spinlock after updating the signal-> fields.
1699 * We don't really need the siglock when we access the non c* fields
1700 * of the signal_struct (for RUSAGE_SELF) even in multithreaded
1701 * case, since we take the tasklist lock for read and the non c* signal->
1702 * fields are updated only in __exit_signal, which is called with
1703 * tasklist_lock taken for write, hence these two threads cannot execute
1704 * concurrently.
1708 static void k_getrusage(struct task_struct *p, int who, struct rusage *r)
1710 struct task_struct *t;
1711 unsigned long flags;
1712 cputime_t utime, stime;
1713 int need_lock = 0;
1715 memset((char *) r, 0, sizeof *r);
1716 utime = stime = cputime_zero;
1718 if (p != current || !thread_group_empty(p))
1719 need_lock = 1;
1721 if (need_lock) {
1722 read_lock(&tasklist_lock);
1723 if (unlikely(!p->signal)) {
1724 read_unlock(&tasklist_lock);
1725 return;
1727 } else
1728 /* See locking comments above */
1729 smp_rmb();
1731 switch (who) {
1732 case RUSAGE_BOTH:
1733 case RUSAGE_CHILDREN:
1734 spin_lock_irqsave(&p->sighand->siglock, flags);
1735 utime = p->signal->cutime;
1736 stime = p->signal->cstime;
1737 r->ru_nvcsw = p->signal->cnvcsw;
1738 r->ru_nivcsw = p->signal->cnivcsw;
1739 r->ru_minflt = p->signal->cmin_flt;
1740 r->ru_majflt = p->signal->cmaj_flt;
1741 spin_unlock_irqrestore(&p->sighand->siglock, flags);
1743 if (who == RUSAGE_CHILDREN)
1744 break;
1746 case RUSAGE_SELF:
1747 utime = cputime_add(utime, p->signal->utime);
1748 stime = cputime_add(stime, p->signal->stime);
1749 r->ru_nvcsw += p->signal->nvcsw;
1750 r->ru_nivcsw += p->signal->nivcsw;
1751 r->ru_minflt += p->signal->min_flt;
1752 r->ru_majflt += p->signal->maj_flt;
1753 t = p;
1754 do {
1755 utime = cputime_add(utime, t->utime);
1756 stime = cputime_add(stime, t->stime);
1757 r->ru_nvcsw += t->nvcsw;
1758 r->ru_nivcsw += t->nivcsw;
1759 r->ru_minflt += t->min_flt;
1760 r->ru_majflt += t->maj_flt;
1761 t = next_thread(t);
1762 } while (t != p);
1763 break;
1765 default:
1766 BUG();
1769 if (need_lock)
1770 read_unlock(&tasklist_lock);
1771 cputime_to_timeval(utime, &r->ru_utime);
1772 cputime_to_timeval(stime, &r->ru_stime);
1775 int getrusage(struct task_struct *p, int who, struct rusage __user *ru)
1777 struct rusage r;
1778 k_getrusage(p, who, &r);
1779 return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
1782 asmlinkage long sys_getrusage(int who, struct rusage __user *ru)
1784 if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN)
1785 return -EINVAL;
1786 return getrusage(current, who, ru);
1789 asmlinkage long sys_umask(int mask)
1791 mask = xchg(&current->fs->umask, mask & S_IRWXUGO);
1792 return mask;
1795 asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
1796 unsigned long arg4, unsigned long arg5)
1798 long error;
1800 error = security_task_prctl(option, arg2, arg3, arg4, arg5);
1801 if (error)
1802 return error;
1804 switch (option) {
1805 case PR_SET_PDEATHSIG:
1806 if (!valid_signal(arg2)) {
1807 error = -EINVAL;
1808 break;
1810 current->pdeath_signal = arg2;
1811 break;
1812 case PR_GET_PDEATHSIG:
1813 error = put_user(current->pdeath_signal, (int __user *)arg2);
1814 break;
1815 case PR_GET_DUMPABLE:
1816 error = current->mm->dumpable;
1817 break;
1818 case PR_SET_DUMPABLE:
1819 if (arg2 < 0 || arg2 > 2) {
1820 error = -EINVAL;
1821 break;
1823 current->mm->dumpable = arg2;
1824 break;
1826 case PR_SET_UNALIGN:
1827 error = SET_UNALIGN_CTL(current, arg2);
1828 break;
1829 case PR_GET_UNALIGN:
1830 error = GET_UNALIGN_CTL(current, arg2);
1831 break;
1832 case PR_SET_FPEMU:
1833 error = SET_FPEMU_CTL(current, arg2);
1834 break;
1835 case PR_GET_FPEMU:
1836 error = GET_FPEMU_CTL(current, arg2);
1837 break;
1838 case PR_SET_FPEXC:
1839 error = SET_FPEXC_CTL(current, arg2);
1840 break;
1841 case PR_GET_FPEXC:
1842 error = GET_FPEXC_CTL(current, arg2);
1843 break;
1844 case PR_GET_TIMING:
1845 error = PR_TIMING_STATISTICAL;
1846 break;
1847 case PR_SET_TIMING:
1848 if (arg2 == PR_TIMING_STATISTICAL)
1849 error = 0;
1850 else
1851 error = -EINVAL;
1852 break;
1854 case PR_GET_KEEPCAPS:
1855 if (current->keep_capabilities)
1856 error = 1;
1857 break;
1858 case PR_SET_KEEPCAPS:
1859 if (arg2 != 0 && arg2 != 1) {
1860 error = -EINVAL;
1861 break;
1863 current->keep_capabilities = arg2;
1864 break;
1865 case PR_SET_NAME: {
1866 struct task_struct *me = current;
1867 unsigned char ncomm[sizeof(me->comm)];
1869 ncomm[sizeof(me->comm)-1] = 0;
1870 if (strncpy_from_user(ncomm, (char __user *)arg2,
1871 sizeof(me->comm)-1) < 0)
1872 return -EFAULT;
1873 set_task_comm(me, ncomm);
1874 return 0;
1876 case PR_GET_NAME: {
1877 struct task_struct *me = current;
1878 unsigned char tcomm[sizeof(me->comm)];
1880 get_task_comm(tcomm, me);
1881 if (copy_to_user((char __user *)arg2, tcomm, sizeof(tcomm)))
1882 return -EFAULT;
1883 return 0;
1885 default:
1886 error = -EINVAL;
1887 break;
1889 return error;