Makefile

   1 # SPDX-License-Identifier: GPL-2.0
   2 VERSION = 5
   3 PATCHLEVEL = 8
   4 SUBLEVEL = 0
   5 EXTRAVERSION = -rc4
   6 NAME = Kleptomaniac Octopus
   7
   8 # *DOCUMENTATION*
   9 # To see a list of typical targets execute "make help"
  10 # More info can be located in ./README
  11 # Comments in this file are targeted only to the developer, do not
  12 # expect to learn how to build the kernel reading this file.
  13
  14 $(if $(filter __%, $(MAKECMDGOALS)), \
  15         $(error targets prefixed with '__' are only for internal use))
  16
  17 # That's our default target when none is given on the command line
  18 PHONY := __all
  19 __all:
  20
  21 # We are using a recursive build, so we need to do a little thinking
  22 # to get the ordering right.
  23 #
  24 # Most importantly: sub-Makefiles should only ever modify files in
  25 # their own directory. If in some directory we have a dependency on
  26 # a file in another dir (which doesn't happen often, but it's often
  27 # unavoidable when linking the built-in.a targets which finally
  28 # turn into vmlinux), we will call a sub make in that other dir, and
  29 # after that we are sure that everything which is in that other dir
  30 # is now up to date.
  31 #
  32 # The only cases where we need to modify files which have global
  33 # effects are thus separated out and done before the recursive
  34 # descending is started. They are now explicitly listed as the
  35 # prepare rule.
  36
  37 ifneq ($(sub_make_done),1)
  38
  39 # Do not use make's built-in rules and variables
  40 # (this increases performance and avoids hard-to-debug behaviour)
  41 MAKEFLAGS += -rR
  42
  43 # Avoid funny character set dependencies
  44 unexport LC_ALL
  45 LC_COLLATE=C
  46 LC_NUMERIC=C
  47 export LC_COLLATE LC_NUMERIC
  48
  49 # Avoid interference with shell env settings
  50 unexport GREP_OPTIONS
  51
  52 # Beautify output
  53 # ---------------------------------------------------------------------------
  54 #
  55 # Normally, we echo the whole command before executing it. By making
  56 # that echo $($(quiet)$(cmd)), we now have the possibility to set
  57 # $(quiet) to choose other forms of output instead, e.g.
  58 #
  59 #         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  60 #         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
  61 #
  62 # If $(quiet) is empty, the whole command will be printed.
  63 # If it is set to "quiet_", only the short version will be printed.
  64 # If it is set to "silent_", nothing will be printed at all, since
  65 # the variable $(silent_cmd_cc_o_c) doesn't exist.
  66 #
  67 # A simple variant is to prefix commands with $(Q) - that's useful
  68 # for commands that shall be hidden in non-verbose mode.
  69 #
  70 #       $(Q)ln $@ :<
  71 #
  72 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
  73 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
  74 # If KBUILD_VERBOSE equals 2 then give the reason why each target is rebuilt.
  75 #
  76 # To put more focus on warnings, be less verbose as default
  77 # Use 'make V=1' to see the full commands
  78
  79 ifeq ("$(origin V)", "command line")
  80   KBUILD_VERBOSE = $(V)
  81 endif
  82 ifndef KBUILD_VERBOSE
  83   KBUILD_VERBOSE = 0
  84 endif
  85
  86 ifeq ($(KBUILD_VERBOSE),1)
  87   quiet =
  88   Q =
  89 else
  90   quiet=quiet_
  91   Q = @
  92 endif
  93
  94 # If the user is running make -s (silent mode), suppress echoing of
  95 # commands
  96
  97 ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),)
  98   quiet=silent_
  99 endif
 100
 101 export quiet Q KBUILD_VERBOSE
 102
 103 # Kbuild will save output files in the current working directory.
 104 # This does not need to match to the root of the kernel source tree.
 105 #
 106 # For example, you can do this:
 107 #
 108 #  cd /dir/to/store/output/files; make -f /dir/to/kernel/source/Makefile
 109 #
 110 # If you want to save output files in a different location, there are
 111 # two syntaxes to specify it.
 112 #
 113 # 1) O=
 114 # Use "make O=dir/to/store/output/files/"
 115 #
 116 # 2) Set KBUILD_OUTPUT
 117 # Set the environment variable KBUILD_OUTPUT to point to the output directory.
 118 # export KBUILD_OUTPUT=dir/to/store/output/files/; make
 119 #
 120 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
 121 # variable.
 122
 123 # Do we want to change the working directory?
 124 ifeq ("$(origin O)", "command line")
 125   KBUILD_OUTPUT := $(O)
 126 endif
 127
 128 ifneq ($(KBUILD_OUTPUT),)
 129 # Make's built-in functions such as $(abspath ...), $(realpath ...) cannot
 130 # expand a shell special character '~'. We use a somewhat tedious way here.
 131 abs_objtree := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) && pwd)
 132 $(if $(abs_objtree),, \
 133      $(error failed to create output directory "$(KBUILD_OUTPUT)"))
 134
 135 # $(realpath ...) resolves symlinks
 136 abs_objtree := $(realpath $(abs_objtree))
 137 else
 138 abs_objtree := $(CURDIR)
 139 endif # ifneq ($(KBUILD_OUTPUT),)
 140
 141 ifeq ($(abs_objtree),$(CURDIR))
 142 # Suppress "Entering directory ..." unless we are changing the work directory.
 143 MAKEFLAGS += --no-print-directory
 144 else
 145 need-sub-make := 1
 146 endif
 147
 148 abs_srctree := $(realpath $(dir $(lastword $(MAKEFILE_LIST))))
 149
 150 ifneq ($(words $(subst :, ,$(abs_srctree))), 1)
 151 $(error source directory cannot contain spaces or colons)
 152 endif
 153
 154 ifneq ($(abs_srctree),$(abs_objtree))
 155 # Look for make include files relative to root of kernel src
 156 #
 157 # This does not become effective immediately because MAKEFLAGS is re-parsed
 158 # once after the Makefile is read. We need to invoke sub-make.
 159 MAKEFLAGS += --include-dir=$(abs_srctree)
 160 need-sub-make := 1
 161 endif
 162
 163 this-makefile := $(lastword $(MAKEFILE_LIST))
 164
 165 ifneq ($(filter 3.%,$(MAKE_VERSION)),)
 166 # 'MAKEFLAGS += -rR' does not immediately become effective for GNU Make 3.x
 167 # We need to invoke sub-make to avoid implicit rules in the top Makefile.
 168 need-sub-make := 1
 169 # Cancel implicit rules for this Makefile.
 170 $(this-makefile): ;
 171 endif
 172
 173 export abs_srctree abs_objtree
 174 export sub_make_done := 1
 175
 176 ifeq ($(need-sub-make),1)
 177
 178 PHONY += $(MAKECMDGOALS) __sub-make
 179
 180 $(filter-out $(this-makefile), $(MAKECMDGOALS)) __all: __sub-make
 181         @:
 182
 183 # Invoke a second make in the output directory, passing relevant variables
 184 __sub-make:
 185         $(Q)$(MAKE) -C $(abs_objtree) -f $(abs_srctree)/Makefile $(MAKECMDGOALS)
 186
 187 endif # need-sub-make
 188 endif # sub_make_done
 189
 190 # We process the rest of the Makefile if this is the final invocation of make
 191 ifeq ($(need-sub-make),)
 192
 193 # Do not print "Entering directory ...",
 194 # but we want to display it when entering to the output directory
 195 # so that IDEs/editors are able to understand relative filenames.
 196 MAKEFLAGS += --no-print-directory
 197
 198 # Call a source code checker (by default, "sparse") as part of the
 199 # C compilation.
 200 #
 201 # Use 'make C=1' to enable checking of only re-compiled files.
 202 # Use 'make C=2' to enable checking of *all* source files, regardless
 203 # of whether they are re-compiled or not.
 204 #
 205 # See the file "Documentation/dev-tools/sparse.rst" for more details,
 206 # including where to get the "sparse" utility.
 207
 208 ifeq ("$(origin C)", "command line")
 209   KBUILD_CHECKSRC = $(C)
 210 endif
 211 ifndef KBUILD_CHECKSRC
 212   KBUILD_CHECKSRC = 0
 213 endif
 214
 215 # Use make M=dir or set the environment variable KBUILD_EXTMOD to specify the
 216 # directory of external module to build. Setting M= takes precedence.
 217 ifeq ("$(origin M)", "command line")
 218   KBUILD_EXTMOD := $(M)
 219 endif
 220
 221 $(if $(word 2, $(KBUILD_EXTMOD)), \
 222         $(error building multiple external modules is not supported))
 223
 224 export KBUILD_CHECKSRC KBUILD_EXTMOD
 225
 226 extmod-prefix = $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)
 227
 228 ifeq ($(abs_srctree),$(abs_objtree))
 229         # building in the source tree
 230         srctree := .
 231         building_out_of_srctree :=
 232 else
 233         ifeq ($(abs_srctree)/,$(dir $(abs_objtree)))
 234                 # building in a subdirectory of the source tree
 235                 srctree := ..
 236         else
 237                 srctree := $(abs_srctree)
 238         endif
 239         building_out_of_srctree := 1
 240 endif
 241
 242 ifneq ($(KBUILD_ABS_SRCTREE),)
 243 srctree := $(abs_srctree)
 244 endif
 245
 246 objtree         := .
 247 VPATH           := $(srctree)
 248
 249 export building_out_of_srctree srctree objtree VPATH
 250
 251 # To make sure we do not include .config for any of the *config targets
 252 # catch them early, and hand them over to scripts/kconfig/Makefile
 253 # It is allowed to specify more targets when calling make, including
 254 # mixing *config targets and build targets.
 255 # For example 'make oldconfig all'.
 256 # Detect when mixed targets is specified, and make a second invocation
 257 # of make so .config is not included in this case either (for *config).
 258
 259 version_h := include/generated/uapi/linux/version.h
 260 old_version_h := include/linux/version.h
 261
 262 clean-targets := %clean mrproper cleandocs
 263 no-dot-config-targets := $(clean-targets) \
 264                          cscope gtags TAGS tags help% %docs check% coccicheck \
 265                          $(version_h) headers headers_% archheaders archscripts \
 266                          %asm-generic kernelversion %src-pkg dt_binding_check \
 267                          outputmakefile
 268 no-sync-config-targets := $(no-dot-config-targets) install %install \
 269                            kernelrelease
 270 single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.s %.symtypes %/
 271
 272 config-build    :=
 273 mixed-build     :=
 274 need-config     := 1
 275 may-sync-config := 1
 276 single-build    :=
 277
 278 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
 279         ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
 280                 need-config :=
 281         endif
 282 endif
 283
 284 ifneq ($(filter $(no-sync-config-targets), $(MAKECMDGOALS)),)
 285         ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),)
 286                 may-sync-config :=
 287         endif
 288 endif
 289
 290 ifneq ($(KBUILD_EXTMOD),)
 291         may-sync-config :=
 292 endif
 293
 294 ifeq ($(KBUILD_EXTMOD),)
 295         ifneq ($(filter config %config,$(MAKECMDGOALS)),)
 296                 config-build := 1
 297                 ifneq ($(words $(MAKECMDGOALS)),1)
 298                         mixed-build := 1
 299                 endif
 300         endif
 301 endif
 302
 303 # We cannot build single targets and the others at the same time
 304 ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),)
 305         single-build := 1
 306         ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),)
 307                 mixed-build := 1
 308         endif
 309 endif
 310
 311 # For "make -j clean all", "make -j mrproper defconfig all", etc.
 312 ifneq ($(filter $(clean-targets),$(MAKECMDGOALS)),)
 313         ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),)
 314                 mixed-build := 1
 315         endif
 316 endif
 317
 318 # install and modules_install need also be processed one by one
 319 ifneq ($(filter install,$(MAKECMDGOALS)),)
 320         ifneq ($(filter modules_install,$(MAKECMDGOALS)),)
 321                 mixed-build := 1
 322         endif
 323 endif
 324
 325 ifdef mixed-build
 326 # ===========================================================================
 327 # We're called with mixed targets (*config and build targets).
 328 # Handle them one by one.
 329
 330 PHONY += $(MAKECMDGOALS) __build_one_by_one
 331
 332 $(MAKECMDGOALS): __build_one_by_one
 333         @:
 334
 335 __build_one_by_one:
 336         $(Q)set -e; \
 337         for i in $(MAKECMDGOALS); do \
 338                 $(MAKE) -f $(srctree)/Makefile $$i; \
 339         done
 340
 341 else # !mixed-build
 342
 343 include scripts/Kbuild.include
 344
 345 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
 346 KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
 347 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 348 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 349
 350 include scripts/subarch.include
 351
 352 # Cross compiling and selecting different set of gcc/bin-utils
 353 # ---------------------------------------------------------------------------
 354 #
 355 # When performing cross compilation for other architectures ARCH shall be set
 356 # to the target architecture. (See arch/* for the possibilities).
 357 # ARCH can be set during invocation of make:
 358 # make ARCH=ia64
 359 # Another way is to have ARCH set in the environment.
 360 # The default ARCH is the host where make is executed.
 361
 362 # CROSS_COMPILE specify the prefix used for all executables used
 363 # during compilation. Only gcc and related bin-utils executables
 364 # are prefixed with $(CROSS_COMPILE).
 365 # CROSS_COMPILE can be set on the command line
 366 # make CROSS_COMPILE=ia64-linux-
 367 # Alternatively CROSS_COMPILE can be set in the environment.
 368 # Default value for CROSS_COMPILE is not to prefix executables
 369 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
 370 ARCH            ?= $(SUBARCH)
 371
 372 # Architecture as present in compile.h
 373 UTS_MACHINE     := $(ARCH)
 374 SRCARCH         := $(ARCH)
 375
 376 # Additional ARCH settings for x86
 377 ifeq ($(ARCH),i386)
 378         SRCARCH := x86
 379 endif
 380 ifeq ($(ARCH),x86_64)
 381         SRCARCH := x86
 382 endif
 383
 384 # Additional ARCH settings for sparc
 385 ifeq ($(ARCH),sparc32)
 386        SRCARCH := sparc
 387 endif
 388 ifeq ($(ARCH),sparc64)
 389        SRCARCH := sparc
 390 endif
 391
 392 # Additional ARCH settings for sh
 393 ifeq ($(ARCH),sh64)
 394        SRCARCH := sh
 395 endif
 396
 397 KCONFIG_CONFIG  ?= .config
 398 export KCONFIG_CONFIG
 399
 400 # Default file for 'make defconfig'. This may be overridden by arch-Makefile.
 401 export KBUILD_DEFCONFIG := defconfig
 402
 403 # SHELL used by kbuild
 404 CONFIG_SHELL := sh
 405
 406 HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
 407 HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
 408 HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
 409
 410 ifneq ($(LLVM),)
 411 HOSTCC  = clang
 412 HOSTCXX = clang++
 413 else
 414 HOSTCC  = gcc
 415 HOSTCXX = g++
 416 endif
 417
 418 export KBUILD_USERCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \
 419                               -O2 -fomit-frame-pointer -std=gnu89
 420 export KBUILD_USERLDFLAGS :=
 421
 422 KBUILD_HOSTCFLAGS   := $(KBUILD_USERCFLAGS) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
 423 KBUILD_HOSTCXXFLAGS := -Wall -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
 424 KBUILD_HOSTLDFLAGS  := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
 425 KBUILD_HOSTLDLIBS   := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
 426
 427 # Make variables (CC, etc...)
 428 CPP             = $(CC) -E
 429 ifneq ($(LLVM),)
 430 CC              = clang
 431 LD              = ld.lld
 432 AR              = llvm-ar
 433 NM              = llvm-nm
 434 OBJCOPY         = llvm-objcopy
 435 OBJDUMP         = llvm-objdump
 436 READELF         = llvm-readelf
 437 OBJSIZE         = llvm-size
 438 STRIP           = llvm-strip
 439 else
 440 CC              = $(CROSS_COMPILE)gcc
 441 LD              = $(CROSS_COMPILE)ld
 442 AR              = $(CROSS_COMPILE)ar
 443 NM              = $(CROSS_COMPILE)nm
 444 OBJCOPY         = $(CROSS_COMPILE)objcopy
 445 OBJDUMP         = $(CROSS_COMPILE)objdump
 446 READELF         = $(CROSS_COMPILE)readelf
 447 OBJSIZE         = $(CROSS_COMPILE)size
 448 STRIP           = $(CROSS_COMPILE)strip
 449 endif
 450 PAHOLE          = pahole
 451 LEX             = flex
 452 YACC            = bison
 453 AWK             = awk
 454 INSTALLKERNEL  := installkernel
 455 DEPMOD          = /sbin/depmod
 456 PERL            = perl
 457 PYTHON          = python
 458 PYTHON3         = python3
 459 CHECK           = sparse
 460 BASH            = bash
 461 KGZIP           = gzip
 462 KBZIP2          = bzip2
 463 KLZOP           = lzop
 464 LZMA            = lzma
 465 LZ4             = lz4c
 466 XZ              = xz
 467
 468 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 469                   -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF)
 470 NOSTDINC_FLAGS :=
 471 CFLAGS_MODULE   =
 472 AFLAGS_MODULE   =
 473 LDFLAGS_MODULE  =
 474 CFLAGS_KERNEL   =
 475 AFLAGS_KERNEL   =
 476 LDFLAGS_vmlinux =
 477
 478 # Use USERINCLUDE when you must reference the UAPI directories only.
 479 USERINCLUDE    := \
 480                 -I$(srctree)/arch/$(SRCARCH)/include/uapi \
 481                 -I$(objtree)/arch/$(SRCARCH)/include/generated/uapi \
 482                 -I$(srctree)/include/uapi \
 483                 -I$(objtree)/include/generated/uapi \
 484                 -include $(srctree)/include/linux/kconfig.h
 485
 486 # Use LINUXINCLUDE when you must reference the include/ directory.
 487 # Needed to be compatible with the O= option
 488 LINUXINCLUDE    := \
 489                 -I$(srctree)/arch/$(SRCARCH)/include \
 490                 -I$(objtree)/arch/$(SRCARCH)/include/generated \
 491                 $(if $(building_out_of_srctree),-I$(srctree)/include) \
 492                 -I$(objtree)/include \
 493                 $(USERINCLUDE)
 494
 495 KBUILD_AFLAGS   := -D__ASSEMBLY__ -fno-PIE
 496 KBUILD_CFLAGS   := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \
 497                    -fno-strict-aliasing -fno-common -fshort-wchar -fno-PIE \
 498                    -Werror=implicit-function-declaration -Werror=implicit-int \
 499                    -Wno-format-security \
 500                    -std=gnu89
 501 KBUILD_CPPFLAGS := -D__KERNEL__
 502 KBUILD_AFLAGS_KERNEL :=
 503 KBUILD_CFLAGS_KERNEL :=
 504 KBUILD_AFLAGS_MODULE  := -DMODULE
 505 KBUILD_CFLAGS_MODULE  := -DMODULE
 506 KBUILD_LDFLAGS_MODULE :=
 507 export KBUILD_LDS_MODULE := $(srctree)/scripts/module-common.lds
 508 KBUILD_LDFLAGS :=
 509 GCC_PLUGINS_CFLAGS :=
 510 CLANG_FLAGS :=
 511
 512 export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC
 513 export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE LEX YACC AWK INSTALLKERNEL
 514 export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
 515 export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ
 516 export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
 517
 518 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
 519 export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
 520 export CFLAGS_KASAN CFLAGS_KASAN_NOSANITIZE CFLAGS_UBSAN CFLAGS_KCSAN
 521 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 522 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
 523 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
 524
 525 # Files to ignore in find ... statements
 526
 527 export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o    \
 528                           -name CVS -o -name .pc -o -name .hg -o -name .git \) \
 529                           -prune -o
 530 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
 531                          --exclude CVS --exclude .pc --exclude .hg --exclude .git
 532
 533 # ===========================================================================
 534 # Rules shared between *config targets and build targets
 535
 536 # Basic helpers built in scripts/basic/
 537 PHONY += scripts_basic
 538 scripts_basic:
 539         $(Q)$(MAKE) $(build)=scripts/basic
 540         $(Q)rm -f .tmp_quiet_recordmcount
 541
 542 PHONY += outputmakefile
 543 # Before starting out-of-tree build, make sure the source tree is clean.
 544 # outputmakefile generates a Makefile in the output directory, if using a
 545 # separate output directory. This allows convenient use of make in the
 546 # output directory.
 547 # At the same time when output Makefile generated, generate .gitignore to
 548 # ignore whole output directory
 549 outputmakefile:
 550 ifdef building_out_of_srctree
 551         $(Q)if [ -f $(srctree)/.config -o \
 552                  -d $(srctree)/include/config -o \
 553                  -d $(srctree)/arch/$(SRCARCH)/include/generated ]; then \
 554                 echo >&2 "***"; \
 555                 echo >&2 "*** The source tree is not clean, please run 'make$(if $(findstring command line, $(origin ARCH)), ARCH=$(ARCH)) mrproper'"; \
 556                 echo >&2 "*** in $(abs_srctree)";\
 557                 echo >&2 "***"; \
 558                 false; \
 559         fi
 560         $(Q)ln -fsn $(srctree) source
 561         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile $(srctree)
 562         $(Q)test -e .gitignore || \
 563         { echo "# this is build directory, ignore it"; echo "*"; } > .gitignore
 564 endif
 565
 566 ifneq ($(shell $(CC) --version 2>&1 | head -n 1 | grep clang),)
 567 ifneq ($(CROSS_COMPILE),)
 568 CLANG_FLAGS     += --target=$(notdir $(CROSS_COMPILE:%-=%))
 569 GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE)elfedit))
 570 CLANG_FLAGS     += --prefix=$(GCC_TOOLCHAIN_DIR)
 571 GCC_TOOLCHAIN   := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
 572 endif
 573 ifneq ($(GCC_TOOLCHAIN),)
 574 CLANG_FLAGS     += --gcc-toolchain=$(GCC_TOOLCHAIN)
 575 endif
 576 ifneq ($(LLVM_IAS),1)
 577 CLANG_FLAGS     += -no-integrated-as
 578 endif
 579 CLANG_FLAGS     += -Werror=unknown-warning-option
 580 KBUILD_CFLAGS   += $(CLANG_FLAGS)
 581 KBUILD_AFLAGS   += $(CLANG_FLAGS)
 582 export CLANG_FLAGS
 583 endif
 584
 585 # The expansion should be delayed until arch/$(SRCARCH)/Makefile is included.
 586 # Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile.
 587 # CC_VERSION_TEXT is referenced from Kconfig (so it needs export),
 588 # and from include/config/auto.conf.cmd to detect the compiler upgrade.
 589 CC_VERSION_TEXT = $(shell $(CC) --version 2>/dev/null | head -n 1)
 590
 591 ifdef config-build
 592 # ===========================================================================
 593 # *config targets only - make sure prerequisites are updated, and descend
 594 # in scripts/kconfig to make the *config target
 595
 596 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
 597 # KBUILD_DEFCONFIG may point out an alternative default configuration
 598 # used for 'make defconfig'
 599 include arch/$(SRCARCH)/Makefile
 600 export KBUILD_DEFCONFIG KBUILD_KCONFIG CC_VERSION_TEXT
 601
 602 config: outputmakefile scripts_basic FORCE
 603         $(Q)$(MAKE) $(build)=scripts/kconfig $@
 604
 605 %config: outputmakefile scripts_basic FORCE
 606         $(Q)$(MAKE) $(build)=scripts/kconfig $@
 607
 608 else #!config-build
 609 # ===========================================================================
 610 # Build targets only - this includes vmlinux, arch specific targets, clean
 611 # targets and others. In general all targets except *config targets.
 612
 613 # If building an external module we do not care about the all: rule
 614 # but instead __all depend on modules
 615 PHONY += all
 616 ifeq ($(KBUILD_EXTMOD),)
 617 __all: all
 618 else
 619 __all: modules
 620 endif
 621
 622 # Decide whether to build built-in, modular, or both.
 623 # Normally, just do built-in.
 624
 625 KBUILD_MODULES :=
 626 KBUILD_BUILTIN := 1
 627
 628 # If we have only "make modules", don't compile built-in objects.
 629 ifeq ($(MAKECMDGOALS),modules)
 630   KBUILD_BUILTIN :=
 631 endif
 632
 633 # If we have "make <whatever> modules", compile modules
 634 # in addition to whatever we do anyway.
 635 # Just "make" or "make all" shall build modules as well
 636
 637 ifneq ($(filter all modules nsdeps,$(MAKECMDGOALS)),)
 638   KBUILD_MODULES := 1
 639 endif
 640
 641 ifeq ($(MAKECMDGOALS),)
 642   KBUILD_MODULES := 1
 643 endif
 644
 645 export KBUILD_MODULES KBUILD_BUILTIN
 646
 647 ifdef need-config
 648 include include/config/auto.conf
 649 endif
 650
 651 ifeq ($(KBUILD_EXTMOD),)
 652 # Objects we will link into vmlinux / subdirs we need to visit
 653 core-y          := init/ usr/
 654 drivers-y       := drivers/ sound/
 655 drivers-$(CONFIG_SAMPLES) += samples/
 656 drivers-y       += net/ virt/
 657 libs-y          := lib/
 658 endif # KBUILD_EXTMOD
 659
 660 # The all: target is the default when no target is given on the
 661 # command line.
 662 # This allow a user to issue only 'make' to build a kernel including modules
 663 # Defaults to vmlinux, but the arch makefile usually adds further targets
 664 all: vmlinux
 665
 666 CFLAGS_GCOV     := -fprofile-arcs -ftest-coverage \
 667         $(call cc-option,-fno-tree-loop-im) \
 668         $(call cc-disable-warning,maybe-uninitialized,)
 669 export CFLAGS_GCOV
 670
 671 # The arch Makefiles can override CC_FLAGS_FTRACE. We may also append it later.
 672 ifdef CONFIG_FUNCTION_TRACER
 673   CC_FLAGS_FTRACE := -pg
 674 endif
 675
 676 RETPOLINE_CFLAGS_GCC := -mindirect-branch=thunk-extern -mindirect-branch-register
 677 RETPOLINE_VDSO_CFLAGS_GCC := -mindirect-branch=thunk-inline -mindirect-branch-register
 678 RETPOLINE_CFLAGS_CLANG := -mretpoline-external-thunk
 679 RETPOLINE_VDSO_CFLAGS_CLANG := -mretpoline
 680 RETPOLINE_CFLAGS := $(call cc-option,$(RETPOLINE_CFLAGS_GCC),$(call cc-option,$(RETPOLINE_CFLAGS_CLANG)))
 681 RETPOLINE_VDSO_CFLAGS := $(call cc-option,$(RETPOLINE_VDSO_CFLAGS_GCC),$(call cc-option,$(RETPOLINE_VDSO_CFLAGS_CLANG)))
 682 export RETPOLINE_CFLAGS
 683 export RETPOLINE_VDSO_CFLAGS
 684
 685 include arch/$(SRCARCH)/Makefile
 686
 687 ifdef need-config
 688 ifdef may-sync-config
 689 # Read in dependencies to all Kconfig* files, make sure to run syncconfig if
 690 # changes are detected. This should be included after arch/$(SRCARCH)/Makefile
 691 # because some architectures define CROSS_COMPILE there.
 692 include include/config/auto.conf.cmd
 693
 694 $(KCONFIG_CONFIG):
 695         @echo >&2 '***'
 696         @echo >&2 '*** Configuration file "$@" not found!'
 697         @echo >&2 '***'
 698         @echo >&2 '*** Please run some configurator (e.g. "make oldconfig" or'
 699         @echo >&2 '*** "make menuconfig" or "make xconfig").'
 700         @echo >&2 '***'
 701         @/bin/false
 702
 703 # The actual configuration files used during the build are stored in
 704 # include/generated/ and include/config/. Update them if .config is newer than
 705 # include/config/auto.conf (which mirrors .config).
 706 #
 707 # This exploits the 'multi-target pattern rule' trick.
 708 # The syncconfig should be executed only once to make all the targets.
 709 # (Note: use the grouped target '&:' when we bump to GNU Make 4.3)
 710 %/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h: $(KCONFIG_CONFIG)
 711         $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
 712 else # !may-sync-config
 713 # External modules and some install targets need include/generated/autoconf.h
 714 # and include/config/auto.conf but do not care if they are up-to-date.
 715 # Use auto.conf to trigger the test
 716 PHONY += include/config/auto.conf
 717
 718 include/config/auto.conf:
 719         $(Q)test -e include/generated/autoconf.h -a -e $@ || (          \
 720         echo >&2;                                                       \
 721         echo >&2 "  ERROR: Kernel configuration is invalid.";           \
 722         echo >&2 "         include/generated/autoconf.h or $@ are missing.";\
 723         echo >&2 "         Run 'make oldconfig && make prepare' on kernel src to fix it.";      \
 724         echo >&2 ;                                                      \
 725         /bin/false)
 726
 727 endif # may-sync-config
 728 endif # need-config
 729
 730 KBUILD_CFLAGS   += $(call cc-option,-fno-delete-null-pointer-checks,)
 731 KBUILD_CFLAGS   += $(call cc-disable-warning,frame-address,)
 732 KBUILD_CFLAGS   += $(call cc-disable-warning, format-truncation)
 733 KBUILD_CFLAGS   += $(call cc-disable-warning, format-overflow)
 734 KBUILD_CFLAGS   += $(call cc-disable-warning, address-of-packed-member)
 735
 736 ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE
 737 KBUILD_CFLAGS += -O2
 738 else ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3
 739 KBUILD_CFLAGS += -O3
 740 else ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 741 KBUILD_CFLAGS += -Os
 742 endif
 743
 744 # Tell gcc to never replace conditional load with a non-conditional one
 745 KBUILD_CFLAGS   += $(call cc-option,--param=allow-store-data-races=0)
 746 KBUILD_CFLAGS   += $(call cc-option,-fno-allow-store-data-races)
 747
 748 include scripts/Makefile.kcov
 749 include scripts/Makefile.gcc-plugins
 750
 751 ifdef CONFIG_READABLE_ASM
 752 # Disable optimizations that make assembler listings hard to read.
 753 # reorder blocks reorders the control in the function
 754 # ipa clone creates specialized cloned functions
 755 # partial inlining inlines only parts of functions
 756 KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \
 757                  $(call cc-option,-fno-ipa-cp-clone,) \
 758                  $(call cc-option,-fno-partial-inlining)
 759 endif
 760
 761 ifneq ($(CONFIG_FRAME_WARN),0)
 762 KBUILD_CFLAGS += -Wframe-larger-than=$(CONFIG_FRAME_WARN)
 763 endif
 764
 765 stackp-flags-$(CONFIG_CC_HAS_STACKPROTECTOR_NONE) := -fno-stack-protector
 766 stackp-flags-$(CONFIG_STACKPROTECTOR)             := -fstack-protector
 767 stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG)      := -fstack-protector-strong
 768
 769 KBUILD_CFLAGS += $(stackp-flags-y)
 770
 771 ifdef CONFIG_CC_IS_CLANG
 772 KBUILD_CPPFLAGS += -Qunused-arguments
 773 KBUILD_CFLAGS += -Wno-format-invalid-specifier
 774 KBUILD_CFLAGS += -Wno-gnu
 775 # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
 776 # source of a reference will be _MergedGlobals and not on of the whitelisted names.
 777 # See modpost pattern 2
 778 KBUILD_CFLAGS += -mno-global-merge
 779 else
 780
 781 # These warnings generated too much noise in a regular build.
 782 # Use make W=1 to enable them (see scripts/Makefile.extrawarn)
 783 KBUILD_CFLAGS += -Wno-unused-but-set-variable
 784
 785 # Warn about unmarked fall-throughs in switch statement.
 786 # Disabled for clang while comment to attribute conversion happens and
 787 # https://github.com/ClangBuiltLinux/linux/issues/636 is discussed.
 788 KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough,)
 789 endif
 790
 791 KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
 792 ifdef CONFIG_FRAME_POINTER
 793 KBUILD_CFLAGS   += -fno-omit-frame-pointer -fno-optimize-sibling-calls
 794 else
 795 # Some targets (ARM with Thumb2, for example), can't be built with frame
 796 # pointers.  For those, we don't have FUNCTION_TRACER automatically
 797 # select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
 798 # incompatible with -fomit-frame-pointer with current GCC, so we don't use
 799 # -fomit-frame-pointer with FUNCTION_TRACER.
 800 ifndef CONFIG_FUNCTION_TRACER
 801 KBUILD_CFLAGS   += -fomit-frame-pointer
 802 endif
 803 endif
 804
 805 # Initialize all stack variables with a pattern, if desired.
 806 ifdef CONFIG_INIT_STACK_ALL
 807 KBUILD_CFLAGS   += -ftrivial-auto-var-init=pattern
 808 endif
 809
 810 DEBUG_CFLAGS    := $(call cc-option, -fno-var-tracking-assignments)
 811
 812 ifdef CONFIG_DEBUG_INFO
 813 ifdef CONFIG_DEBUG_INFO_SPLIT
 814 DEBUG_CFLAGS    += -gsplit-dwarf
 815 else
 816 DEBUG_CFLAGS    += -g
 817 endif
 818 KBUILD_AFLAGS   += -Wa,-gdwarf-2
 819 endif
 820 ifdef CONFIG_DEBUG_INFO_DWARF4
 821 DEBUG_CFLAGS    += -gdwarf-4
 822 endif
 823
 824 ifdef CONFIG_DEBUG_INFO_REDUCED
 825 DEBUG_CFLAGS    += $(call cc-option, -femit-struct-debug-baseonly) \
 826                    $(call cc-option,-fno-var-tracking)
 827 endif
 828
 829 ifdef CONFIG_DEBUG_INFO_COMPRESSED
 830 DEBUG_CFLAGS    += -gz=zlib
 831 KBUILD_AFLAGS   += -gz=zlib
 832 KBUILD_LDFLAGS  += --compress-debug-sections=zlib
 833 endif
 834
 835 KBUILD_CFLAGS += $(DEBUG_CFLAGS)
 836 export DEBUG_CFLAGS
 837
 838 ifdef CONFIG_FUNCTION_TRACER
 839 ifdef CONFIG_FTRACE_MCOUNT_RECORD
 840   # gcc 5 supports generating the mcount tables directly
 841   ifeq ($(call cc-option-yn,-mrecord-mcount),y)
 842     CC_FLAGS_FTRACE     += -mrecord-mcount
 843     export CC_USING_RECORD_MCOUNT := 1
 844   endif
 845   ifdef CONFIG_HAVE_NOP_MCOUNT
 846     ifeq ($(call cc-option-yn, -mnop-mcount),y)
 847       CC_FLAGS_FTRACE   += -mnop-mcount
 848       CC_FLAGS_USING    += -DCC_USING_NOP_MCOUNT
 849     endif
 850   endif
 851 endif
 852 ifdef CONFIG_HAVE_FENTRY
 853   ifeq ($(call cc-option-yn, -mfentry),y)
 854     CC_FLAGS_FTRACE     += -mfentry
 855     CC_FLAGS_USING      += -DCC_USING_FENTRY
 856   endif
 857 endif
 858 export CC_FLAGS_FTRACE
 859 KBUILD_CFLAGS   += $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING)
 860 KBUILD_AFLAGS   += $(CC_FLAGS_USING)
 861 ifdef CONFIG_DYNAMIC_FTRACE
 862         ifdef CONFIG_HAVE_C_RECORDMCOUNT
 863                 BUILD_C_RECORDMCOUNT := y
 864                 export BUILD_C_RECORDMCOUNT
 865         endif
 866 endif
 867 endif
 868
 869 # We trigger additional mismatches with less inlining
 870 ifdef CONFIG_DEBUG_SECTION_MISMATCH
 871 KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
 872 endif
 873
 874 ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
 875 KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
 876 LDFLAGS_vmlinux += --gc-sections
 877 endif
 878
 879 ifdef CONFIG_LIVEPATCH
 880 KBUILD_CFLAGS += $(call cc-option, -flive-patching=inline-clone)
 881 endif
 882
 883 ifdef CONFIG_SHADOW_CALL_STACK
 884 CC_FLAGS_SCS    := -fsanitize=shadow-call-stack
 885 KBUILD_CFLAGS   += $(CC_FLAGS_SCS)
 886 export CC_FLAGS_SCS
 887 endif
 888
 889 # arch Makefile may override CC so keep this after arch Makefile is included
 890 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
 891
 892 # warn about C99 declaration after statement
 893 KBUILD_CFLAGS += -Wdeclaration-after-statement
 894
 895 # Variable Length Arrays (VLAs) should not be used anywhere in the kernel
 896 KBUILD_CFLAGS += -Wvla
 897
 898 # disable pointer signed / unsigned warnings in gcc 4.0
 899 KBUILD_CFLAGS += -Wno-pointer-sign
 900
 901 # disable stringop warnings in gcc 8+
 902 KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
 903
 904 # We'll want to enable this eventually, but it's not going away for 5.7 at least
 905 KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
 906 KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
 907 KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
 908
 909 # Another good warning that we'll want to enable eventually
 910 KBUILD_CFLAGS += $(call cc-disable-warning, restrict)
 911
 912 # Enabled with W=2, disabled by default as noisy
 913 KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
 914
 915 # disable invalid "can't wrap" optimizations for signed / pointers
 916 KBUILD_CFLAGS   += $(call cc-option,-fno-strict-overflow)
 917
 918 # clang sets -fmerge-all-constants by default as optimization, but this
 919 # is non-conforming behavior for C and in fact breaks the kernel, so we
 920 # need to disable it here generally.
 921 KBUILD_CFLAGS   += $(call cc-option,-fno-merge-all-constants)
 922
 923 # for gcc -fno-merge-all-constants disables everything, but it is fine
 924 # to have actual conforming behavior enabled.
 925 KBUILD_CFLAGS   += $(call cc-option,-fmerge-constants)
 926
 927 # Make sure -fstack-check isn't enabled (like gentoo apparently did)
 928 KBUILD_CFLAGS  += $(call cc-option,-fno-stack-check,)
 929
 930 # conserve stack if available
 931 KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
 932
 933 # Prohibit date/time macros, which would make the build non-deterministic
 934 KBUILD_CFLAGS   += $(call cc-option,-Werror=date-time)
 935
 936 # enforce correct pointer usage
 937 KBUILD_CFLAGS   += $(call cc-option,-Werror=incompatible-pointer-types)
 938
 939 # Require designated initializers for all marked structures
 940 KBUILD_CFLAGS   += $(call cc-option,-Werror=designated-init)
 941
 942 # change __FILE__ to the relative path from the srctree
 943 KBUILD_CFLAGS   += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
 944
 945 # ensure -fcf-protection is disabled when using retpoline as it is
 946 # incompatible with -mindirect-branch=thunk-extern
 947 ifdef CONFIG_RETPOLINE
 948 KBUILD_CFLAGS += $(call cc-option,-fcf-protection=none)
 949 endif
 950
 951 include scripts/Makefile.kasan
 952 include scripts/Makefile.extrawarn
 953 include scripts/Makefile.ubsan
 954 include scripts/Makefile.kcsan
 955
 956 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
 957 KBUILD_CPPFLAGS += $(KCPPFLAGS)
 958 KBUILD_AFLAGS   += $(KAFLAGS)
 959 KBUILD_CFLAGS   += $(KCFLAGS)
 960
 961 KBUILD_LDFLAGS_MODULE += --build-id
 962 LDFLAGS_vmlinux += --build-id
 963
 964 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
 965 LDFLAGS_vmlinux += $(call ld-option, -X,)
 966 endif
 967
 968 ifeq ($(CONFIG_RELR),y)
 969 LDFLAGS_vmlinux += --pack-dyn-relocs=relr
 970 endif
 971
 972 # Align the bit size of userspace programs with the kernel
 973 KBUILD_USERCFLAGS  += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
 974 KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
 975
 976 # make the checker run with the right architecture
 977 CHECKFLAGS += --arch=$(ARCH)
 978
 979 # insure the checker run with the right endianness
 980 CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
 981
 982 # the checker needs the correct machine size
 983 CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
 984
 985 # Default kernel image to build when no specific target is given.
 986 # KBUILD_IMAGE may be overruled on the command line or
 987 # set in the environment
 988 # Also any assignments in arch/$(ARCH)/Makefile take precedence over
 989 # this default value
 990 export KBUILD_IMAGE ?= vmlinux
 991
 992 #
 993 # INSTALL_PATH specifies where to place the updated kernel and system map
 994 # images. Default is /boot, but you can set it to other values
 995 export  INSTALL_PATH ?= /boot
 996
 997 #
 998 # INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots.
 999 # Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as
1000 # an argument if needed. Otherwise it defaults to the kernel install path
1001 #
1002 export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE)
1003
1004 #
1005 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
1006 # relocations required by build roots.  This is not defined in the
1007 # makefile but the argument can be passed to make if needed.
1008 #
1009
1010 MODLIB  = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
1011 export MODLIB
1012
1013 #
1014 # INSTALL_MOD_STRIP, if defined, will cause modules to be
1015 # stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
1016 # the default option --strip-debug will be used.  Otherwise,
1017 # INSTALL_MOD_STRIP value will be used as the options to the strip command.
1018
1019 ifdef INSTALL_MOD_STRIP
1020 ifeq ($(INSTALL_MOD_STRIP),1)
1021 mod_strip_cmd = $(STRIP) --strip-debug
1022 else
1023 mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
1024 endif # INSTALL_MOD_STRIP=1
1025 else
1026 mod_strip_cmd = true
1027 endif # INSTALL_MOD_STRIP
1028 export mod_strip_cmd
1029
1030 # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed
1031 # after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP
1032 # or CONFIG_MODULE_COMPRESS_XZ.
1033
1034 mod_compress_cmd = true
1035 ifdef CONFIG_MODULE_COMPRESS
1036   ifdef CONFIG_MODULE_COMPRESS_GZIP
1037     mod_compress_cmd = $(KGZIP) -n -f
1038   endif # CONFIG_MODULE_COMPRESS_GZIP
1039   ifdef CONFIG_MODULE_COMPRESS_XZ
1040     mod_compress_cmd = $(XZ) -f
1041   endif # CONFIG_MODULE_COMPRESS_XZ
1042 endif # CONFIG_MODULE_COMPRESS
1043 export mod_compress_cmd
1044
1045 ifdef CONFIG_MODULE_SIG_ALL
1046 $(eval $(call config_filename,MODULE_SIG_KEY))
1047
1048 mod_sign_cmd = scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODULE_SIG_KEY_SRCPREFIX)$(CONFIG_MODULE_SIG_KEY) certs/signing_key.x509
1049 else
1050 mod_sign_cmd = true
1051 endif
1052 export mod_sign_cmd
1053
1054 HOST_LIBELF_LIBS = $(shell pkg-config libelf --libs 2>/dev/null || echo -lelf)
1055
1056 ifdef CONFIG_STACK_VALIDATION
1057   has_libelf := $(call try-run,\
1058                 echo "int main() {}" | $(HOSTCC) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0)
1059   ifeq ($(has_libelf),1)
1060     objtool_target := tools/objtool FORCE
1061   else
1062     SKIP_STACK_VALIDATION := 1
1063     export SKIP_STACK_VALIDATION
1064   endif
1065 endif
1066
1067 PHONY += prepare0
1068
1069 export MODORDER := $(extmod-prefix)modules.order
1070 export MODULES_NSDEPS := $(extmod-prefix)modules.nsdeps
1071
1072 ifeq ($(KBUILD_EXTMOD),)
1073 core-y          += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
1074
1075 vmlinux-dirs    := $(patsubst %/,%,$(filter %/, \
1076                      $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
1077                      $(libs-y) $(libs-m)))
1078
1079 vmlinux-alldirs := $(sort $(vmlinux-dirs) Documentation \
1080                      $(patsubst %/,%,$(filter %/, $(core-) \
1081                         $(drivers-) $(libs-))))
1082
1083 subdir-modorder := $(addsuffix modules.order,$(filter %/, \
1084                         $(core-y) $(core-m) $(libs-y) $(libs-m) \
1085                         $(drivers-y) $(drivers-m)))
1086
1087 build-dirs      := $(vmlinux-dirs)
1088 clean-dirs      := $(vmlinux-alldirs)
1089
1090 # Externally visible symbols (used by link-vmlinux.sh)
1091 KBUILD_VMLINUX_OBJS := $(head-y) $(patsubst %/,%/built-in.a, $(core-y))
1092 KBUILD_VMLINUX_OBJS += $(addsuffix built-in.a, $(filter %/, $(libs-y)))
1093 ifdef CONFIG_MODULES
1094 KBUILD_VMLINUX_OBJS += $(patsubst %/, %/lib.a, $(filter %/, $(libs-y)))
1095 KBUILD_VMLINUX_LIBS := $(filter-out %/, $(libs-y))
1096 else
1097 KBUILD_VMLINUX_LIBS := $(patsubst %/,%/lib.a, $(libs-y))
1098 endif
1099 KBUILD_VMLINUX_OBJS += $(patsubst %/,%/built-in.a, $(drivers-y))
1100
1101 export KBUILD_VMLINUX_OBJS KBUILD_VMLINUX_LIBS
1102 export KBUILD_LDS          := arch/$(SRCARCH)/kernel/vmlinux.lds
1103 export LDFLAGS_vmlinux
1104 # used by scripts/Makefile.package
1105 export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) LICENSES arch include scripts tools)
1106
1107 vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)
1108
1109 # Recurse until adjust_autoksyms.sh is satisfied
1110 PHONY += autoksyms_recursive
1111 ifdef CONFIG_TRIM_UNUSED_KSYMS
1112 # For the kernel to actually contain only the needed exported symbols,
1113 # we have to build modules as well to determine what those symbols are.
1114 # (this can be evaluated only once include/config/auto.conf has been included)
1115 KBUILD_MODULES := 1
1116
1117 autoksyms_recursive: descend modules.order
1118         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \
1119           "$(MAKE) -f $(srctree)/Makefile vmlinux"
1120 endif
1121
1122 autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h)
1123
1124 quiet_cmd_autoksyms_h = GEN     $@
1125       cmd_autoksyms_h = mkdir -p $(dir $@); \
1126                         $(CONFIG_SHELL) $(srctree)/scripts/gen_autoksyms.sh $@
1127
1128 $(autoksyms_h):
1129         $(call cmd,autoksyms_h)
1130
1131 ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink)
1132
1133 # Final link of vmlinux with optional arch pass after final link
1134 cmd_link-vmlinux =                                                 \
1135         $(CONFIG_SHELL) $< $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_vmlinux) ;    \
1136         $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
1137
1138 vmlinux: scripts/link-vmlinux.sh autoksyms_recursive $(vmlinux-deps) FORCE
1139         +$(call if_changed,link-vmlinux)
1140
1141 targets := vmlinux
1142
1143 # The actual objects are generated when descending,
1144 # make sure no implicit rule kicks in
1145 $(sort $(vmlinux-deps) $(subdir-modorder)): descend ;
1146
1147 filechk_kernel.release = \
1148         echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1149
1150 # Store (new) KERNELRELEASE string in include/config/kernel.release
1151 include/config/kernel.release: FORCE
1152         $(call filechk,kernel.release)
1153
1154 # Additional helpers built in scripts/
1155 # Carefully list dependencies so we do not try to build scripts twice
1156 # in parallel
1157 PHONY += scripts
1158 scripts: scripts_basic scripts_dtc
1159         $(Q)$(MAKE) $(build)=$(@)
1160
1161 # Things we need to do before we recursively start building the kernel
1162 # or the modules are listed in "prepare".
1163 # A multi level approach is used. prepareN is processed before prepareN-1.
1164 # archprepare is used in arch Makefiles and when processed asm symlink,
1165 # version.h and scripts_basic is processed / created.
1166
1167 PHONY += prepare archprepare
1168
1169 archprepare: outputmakefile archheaders archscripts scripts include/config/kernel.release \
1170         asm-generic $(version_h) $(autoksyms_h) include/generated/utsrelease.h \
1171         include/generated/autoconf.h
1172
1173 prepare0: archprepare
1174         $(Q)$(MAKE) $(build)=scripts/mod
1175         $(Q)$(MAKE) $(build)=.
1176
1177 # All the preparing..
1178 prepare: prepare0 prepare-objtool
1179
1180 # Support for using generic headers in asm-generic
1181 asm-generic := -f $(srctree)/scripts/Makefile.asm-generic obj
1182
1183 PHONY += asm-generic uapi-asm-generic
1184 asm-generic: uapi-asm-generic
1185         $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/asm \
1186         generic=include/asm-generic
1187 uapi-asm-generic:
1188         $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/uapi/asm \
1189         generic=include/uapi/asm-generic
1190
1191 PHONY += prepare-objtool
1192 prepare-objtool: $(objtool_target)
1193 ifeq ($(SKIP_STACK_VALIDATION),1)
1194 ifdef CONFIG_UNWINDER_ORC
1195         @echo "error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
1196         @false
1197 else
1198         @echo "warning: Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
1199 endif
1200 endif
1201
1202 # Generate some files
1203 # ---------------------------------------------------------------------------
1204
1205 # KERNELRELEASE can change from a few different places, meaning version.h
1206 # needs to be updated, so this check is forced on all builds
1207
1208 uts_len := 64
1209 define filechk_utsrelease.h
1210         if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
1211           echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
1212           exit 1;                                                         \
1213         fi;                                                               \
1214         echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"
1215 endef
1216
1217 define filechk_version.h
1218         echo \#define LINUX_VERSION_CODE $(shell                         \
1219         expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
1220         echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'
1221 endef
1222
1223 $(version_h): FORCE
1224         $(call filechk,version.h)
1225         $(Q)rm -f $(old_version_h)
1226
1227 include/generated/utsrelease.h: include/config/kernel.release FORCE
1228         $(call filechk,utsrelease.h)
1229
1230 PHONY += headerdep
1231 headerdep:
1232         $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
1233         $(srctree)/scripts/headerdep.pl -I$(srctree)/include
1234
1235 # ---------------------------------------------------------------------------
1236 # Kernel headers
1237
1238 #Default location for installed headers
1239 export INSTALL_HDR_PATH = $(objtree)/usr
1240
1241 quiet_cmd_headers_install = INSTALL $(INSTALL_HDR_PATH)/include
1242       cmd_headers_install = \
1243         mkdir -p $(INSTALL_HDR_PATH); \
1244         rsync -mrl --include='*/' --include='*\.h' --exclude='*' \
1245         usr/include $(INSTALL_HDR_PATH)
1246
1247 PHONY += headers_install
1248 headers_install: headers
1249         $(call cmd,headers_install)
1250
1251 PHONY += archheaders archscripts
1252
1253 hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj
1254
1255 PHONY += headers
1256 headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts
1257         $(if $(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/Kbuild),, \
1258           $(error Headers not exportable for the $(SRCARCH) architecture))
1259         $(Q)$(MAKE) $(hdr-inst)=include/uapi
1260         $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi
1261
1262 # Deprecated. It is no-op now.
1263 PHONY += headers_check
1264 headers_check:
1265         @:
1266
1267 ifdef CONFIG_HEADERS_INSTALL
1268 prepare: headers
1269 endif
1270
1271 PHONY += scripts_unifdef
1272 scripts_unifdef: scripts_basic
1273         $(Q)$(MAKE) $(build)=scripts scripts/unifdef
1274
1275 # ---------------------------------------------------------------------------
1276 # Kernel selftest
1277
1278 PHONY += kselftest
1279 kselftest:
1280         $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests
1281
1282 kselftest-%: FORCE
1283         $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests $*
1284
1285 PHONY += kselftest-merge
1286 kselftest-merge:
1287         $(if $(wildcard $(objtree)/.config),, $(error No .config exists, config your kernel first!))
1288         $(Q)find $(srctree)/tools/testing/selftests -name config | \
1289                 xargs $(srctree)/scripts/kconfig/merge_config.sh -m $(objtree)/.config
1290         $(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
1291
1292 # ---------------------------------------------------------------------------
1293 # Devicetree files
1294
1295 ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
1296 dtstree := arch/$(SRCARCH)/boot/dts
1297 endif
1298
1299 ifneq ($(dtstree),)
1300
1301 %.dtb: include/config/kernel.release scripts_dtc
1302         $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
1303
1304 PHONY += dtbs dtbs_install dtbs_check
1305 dtbs: include/config/kernel.release scripts_dtc
1306         $(Q)$(MAKE) $(build)=$(dtstree)
1307
1308 ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),)
1309 export CHECK_DTBS=y
1310 dtbs: dt_binding_check
1311 endif
1312
1313 dtbs_check: dtbs
1314
1315 dtbs_install:
1316         $(Q)$(MAKE) $(dtbinst)=$(dtstree) dst=$(INSTALL_DTBS_PATH)
1317
1318 ifdef CONFIG_OF_EARLY_FLATTREE
1319 all: dtbs
1320 endif
1321
1322 endif
1323
1324 PHONY += scripts_dtc
1325 scripts_dtc: scripts_basic
1326         $(Q)$(MAKE) $(build)=scripts/dtc
1327
1328 ifneq ($(filter dt_binding_check, $(MAKECMDGOALS)),)
1329 export CHECK_DT_BINDING=y
1330 endif
1331
1332 PHONY += dt_binding_check
1333 dt_binding_check: scripts_dtc
1334         $(Q)$(MAKE) $(build)=Documentation/devicetree/bindings
1335
1336 # ---------------------------------------------------------------------------
1337 # Modules
1338
1339 ifdef CONFIG_MODULES
1340
1341 # By default, build modules as well
1342
1343 all: modules
1344
1345 # When we're building modules with modversions, we need to consider
1346 # the built-in objects during the descend as well, in order to
1347 # make sure the checksums are up to date before we record them.
1348 ifdef CONFIG_MODVERSIONS
1349   KBUILD_BUILTIN := 1
1350 endif
1351
1352 # Build modules
1353 #
1354 # A module can be listed more than once in obj-m resulting in
1355 # duplicate lines in modules.order files.  Those are removed
1356 # using awk while concatenating to the final file.
1357
1358 PHONY += modules
1359 modules: $(if $(KBUILD_BUILTIN),vmlinux) modules_check
1360         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1361
1362 PHONY += modules_check
1363 modules_check: modules.order
1364         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/modules-check.sh $<
1365
1366 cmd_modules_order = $(AWK) '!x[$$0]++' $(real-prereqs) > $@
1367
1368 modules.order: $(subdir-modorder) FORCE
1369         $(call if_changed,modules_order)
1370
1371 targets += modules.order
1372
1373 # Target to prepare building external modules
1374 PHONY += modules_prepare
1375 modules_prepare: prepare
1376
1377 # Target to install modules
1378 PHONY += modules_install
1379 modules_install: _modinst_ _modinst_post
1380
1381 PHONY += _modinst_
1382 _modinst_:
1383         @rm -rf $(MODLIB)/kernel
1384         @rm -f $(MODLIB)/source
1385         @mkdir -p $(MODLIB)/kernel
1386         @ln -s $(abspath $(srctree)) $(MODLIB)/source
1387         @if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
1388                 rm -f $(MODLIB)/build ; \
1389                 ln -s $(CURDIR) $(MODLIB)/build ; \
1390         fi
1391         @sed 's:^:kernel/:' modules.order > $(MODLIB)/modules.order
1392         @cp -f modules.builtin $(MODLIB)/
1393         @cp -f $(objtree)/modules.builtin.modinfo $(MODLIB)/
1394         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1395
1396 # This depmod is only for convenience to give the initial
1397 # boot a modules.dep even before / is mounted read-write.  However the
1398 # boot script depmod is the master version.
1399 PHONY += _modinst_post
1400 _modinst_post: _modinst_
1401         $(call cmd,depmod)
1402
1403 ifeq ($(CONFIG_MODULE_SIG), y)
1404 PHONY += modules_sign
1405 modules_sign:
1406         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign
1407 endif
1408
1409 else # CONFIG_MODULES
1410
1411 # Modules not configured
1412 # ---------------------------------------------------------------------------
1413
1414 PHONY += modules modules_install
1415 modules modules_install:
1416         @echo >&2
1417         @echo >&2 "The present kernel configuration has modules disabled."
1418         @echo >&2 "Type 'make config' and enable loadable module support."
1419         @echo >&2 "Then build a kernel with module support enabled."
1420         @echo >&2
1421         @exit 1
1422
1423 endif # CONFIG_MODULES
1424
1425 ###
1426 # Cleaning is done on three levels.
1427 # make clean     Delete most generated files
1428 #                Leave enough to build external modules
1429 # make mrproper  Delete the current configuration, and all generated files
1430 # make distclean Remove editor backup files, patch leftover files and the like
1431
1432 # Directories & files removed with 'make clean'
1433 CLEAN_FILES += include/ksym vmlinux.symvers \
1434                modules.builtin modules.builtin.modinfo modules.nsdeps
1435
1436 # Directories & files removed with 'make mrproper'
1437 MRPROPER_FILES += include/config include/generated          \
1438                   arch/$(SRCARCH)/include/generated .tmp_objdiff \
1439                   debian snap tar-install \
1440                   .config .config.old .version \
1441                   Module.symvers \
1442                   signing_key.pem signing_key.priv signing_key.x509     \
1443                   x509.genkey extra_certificates signing_key.x509.keyid \
1444                   signing_key.x509.signer vmlinux-gdb.py \
1445                   *.spec
1446
1447 # Directories & files removed with 'make distclean'
1448 DISTCLEAN_FILES += tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
1449
1450 # clean - Delete most, but leave enough to build external modules
1451 #
1452 clean: rm-files := $(CLEAN_FILES)
1453
1454 PHONY += archclean vmlinuxclean
1455
1456 vmlinuxclean:
1457         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
1458         $(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean)
1459
1460 clean: archclean vmlinuxclean
1461
1462 # mrproper - Delete all generated files, including .config
1463 #
1464 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1465 mrproper-dirs      := $(addprefix _mrproper_,scripts)
1466
1467 PHONY += $(mrproper-dirs) mrproper
1468 $(mrproper-dirs):
1469         $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1470
1471 mrproper: clean $(mrproper-dirs)
1472         $(call cmd,rmfiles)
1473
1474 # distclean
1475 #
1476 distclean: rm-files := $(wildcard $(DISTCLEAN_FILES))
1477
1478 PHONY += distclean
1479
1480 distclean: mrproper
1481         $(call cmd,rmfiles)
1482         @find $(srctree) $(RCS_FIND_IGNORE) \
1483                 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1484                 -o -name '*.bak' -o -name '#*#' -o -name '*%' \
1485                 -o -name 'core' \) \
1486                 -type f -print | xargs rm -f
1487
1488
1489 # Packaging of the kernel to various formats
1490 # ---------------------------------------------------------------------------
1491
1492 %src-pkg: FORCE
1493         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@
1494 %pkg: include/config/kernel.release FORCE
1495         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@
1496
1497 # Brief documentation of the typical targets used
1498 # ---------------------------------------------------------------------------
1499
1500 boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
1501 boards := $(sort $(notdir $(boards)))
1502 board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
1503 board-dirs := $(sort $(notdir $(board-dirs:/=)))
1504
1505 PHONY += help
1506 help:
1507         @echo  'Cleaning targets:'
1508         @echo  '  clean           - Remove most generated files but keep the config and'
1509         @echo  '                    enough build support to build external modules'
1510         @echo  '  mrproper        - Remove all generated files + config + various backup files'
1511         @echo  '  distclean       - mrproper + remove editor backup and patch files'
1512         @echo  ''
1513         @echo  'Configuration targets:'
1514         @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1515         @echo  ''
1516         @echo  'Other generic targets:'
1517         @echo  '  all             - Build all targets marked with [*]'
1518         @echo  '* vmlinux         - Build the bare kernel'
1519         @echo  '* modules         - Build all modules'
1520         @echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
1521         @echo  '  dir/            - Build all files in dir and below'
1522         @echo  '  dir/file.[ois]  - Build specified target only'
1523         @echo  '  dir/file.ll     - Build the LLVM assembly file'
1524         @echo  '                    (requires compiler support for LLVM assembly generation)'
1525         @echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
1526         @echo  '                    (requires a recent binutils and recent build (System.map))'
1527         @echo  '  dir/file.ko     - Build module including final link'
1528         @echo  '  modules_prepare - Set up for building external modules'
1529         @echo  '  tags/TAGS       - Generate tags file for editors'
1530         @echo  '  cscope          - Generate cscope index'
1531         @echo  '  gtags           - Generate GNU GLOBAL index'
1532         @echo  '  kernelrelease   - Output the release version string (use with make -s)'
1533         @echo  '  kernelversion   - Output the version stored in Makefile (use with make -s)'
1534         @echo  '  image_name      - Output the image name (use with make -s)'
1535         @echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
1536          echo  '                    (default: $(INSTALL_HDR_PATH))'; \
1537          echo  ''
1538         @echo  'Static analysers:'
1539         @echo  '  checkstack      - Generate a list of stack hogs'
1540         @echo  '  namespacecheck  - Name space analysis on compiled kernel'
1541         @echo  '  versioncheck    - Sanity check on version.h usage'
1542         @echo  '  includecheck    - Check for duplicate included header files'
1543         @echo  '  export_report   - List the usages of all exported symbols'
1544         @echo  '  headerdep       - Detect inclusion cycles in headers'
1545         @echo  '  coccicheck      - Check with Coccinelle'
1546         @echo  ''
1547         @echo  'Tools:'
1548         @echo  '  nsdeps          - Generate missing symbol namespace dependencies'
1549         @echo  ''
1550         @echo  'Kernel selftest:'
1551         @echo  '  kselftest         - Build and run kernel selftest'
1552         @echo  '                      Build, install, and boot kernel before'
1553         @echo  '                      running kselftest on it'
1554         @echo  '                      Run as root for full coverage'
1555         @echo  '  kselftest-all     - Build kernel selftest'
1556         @echo  '  kselftest-install - Build and install kernel selftest'
1557         @echo  '  kselftest-clean   - Remove all generated kselftest files'
1558         @echo  '  kselftest-merge   - Merge all the config dependencies of'
1559         @echo  '                      kselftest to existing .config.'
1560         @echo  ''
1561         @$(if $(dtstree), \
1562                 echo 'Devicetree:'; \
1563                 echo '* dtbs             - Build device tree blobs for enabled boards'; \
1564                 echo '  dtbs_install     - Install dtbs to $(INSTALL_DTBS_PATH)'; \
1565                 echo '  dt_binding_check - Validate device tree binding documents'; \
1566                 echo '  dtbs_check       - Validate device tree source files';\
1567                 echo '')
1568
1569         @echo 'Userspace tools targets:'
1570         @echo '  use "make tools/help"'
1571         @echo '  or  "cd tools; make help"'
1572         @echo  ''
1573         @echo  'Kernel packaging:'
1574         @$(MAKE) -f $(srctree)/scripts/Makefile.package help
1575         @echo  ''
1576         @echo  'Documentation targets:'
1577         @$(MAKE) -f $(srctree)/Documentation/Makefile dochelp
1578         @echo  ''
1579         @echo  'Architecture specific targets ($(SRCARCH)):'
1580         @$(if $(archhelp),$(archhelp),\
1581                 echo '  No architecture specific help defined for $(SRCARCH)')
1582         @echo  ''
1583         @$(if $(boards), \
1584                 $(foreach b, $(boards), \
1585                 printf "  %-27s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
1586                 echo '')
1587         @$(if $(board-dirs), \
1588                 $(foreach b, $(board-dirs), \
1589                 printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
1590                 printf "  %-16s - Show all of the above\\n" help-boards; \
1591                 echo '')
1592
1593         @echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1594         @echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
1595         @echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
1596         @echo  '  make C=1   [targets] Check re-compiled c source with $$CHECK'
1597         @echo  '                       (sparse by default)'
1598         @echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
1599         @echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1600         @echo  '  make W=n   [targets] Enable extra build checks, n=1,2,3 where'
1601         @echo  '                1: warnings which may be relevant and do not occur too often'
1602         @echo  '                2: warnings which occur quite often but may still be relevant'
1603         @echo  '                3: more obscure warnings, can most likely be ignored'
1604         @echo  '                Multiple levels can be combined with W=12 or W=123'
1605         @echo  ''
1606         @echo  'Execute "make" or "make all" to build all targets marked with [*] '
1607         @echo  'For further info see the ./README file'
1608
1609
1610 help-board-dirs := $(addprefix help-,$(board-dirs))
1611
1612 help-boards: $(help-board-dirs)
1613
1614 boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig)))
1615
1616 $(help-board-dirs): help-%:
1617         @echo  'Architecture specific targets ($(SRCARCH) $*):'
1618         @$(if $(boards-per-dir), \
1619                 $(foreach b, $(boards-per-dir), \
1620                 printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
1621                 echo '')
1622
1623
1624 # Documentation targets
1625 # ---------------------------------------------------------------------------
1626 DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
1627                linkcheckdocs dochelp refcheckdocs
1628 PHONY += $(DOC_TARGETS)
1629 $(DOC_TARGETS):
1630         $(Q)$(MAKE) $(build)=Documentation $@
1631
1632 # Misc
1633 # ---------------------------------------------------------------------------
1634
1635 PHONY += scripts_gdb
1636 scripts_gdb: prepare0
1637         $(Q)$(MAKE) $(build)=scripts/gdb
1638         $(Q)ln -fsn $(abspath $(srctree)/scripts/gdb/vmlinux-gdb.py)
1639
1640 ifdef CONFIG_GDB_SCRIPTS
1641 all: scripts_gdb
1642 endif
1643
1644 else # KBUILD_EXTMOD
1645
1646 ###
1647 # External module support.
1648 # When building external modules the kernel used as basis is considered
1649 # read-only, and no consistency checks are made and the make
1650 # system is not used on the basis kernel. If updates are required
1651 # in the basis kernel ordinary make commands (without M=...) must
1652 # be used.
1653 #
1654 # The following are the only valid targets when building external
1655 # modules.
1656 # make M=dir clean     Delete all automatically generated files
1657 # make M=dir modules   Make all modules in specified dir
1658 # make M=dir           Same as 'make M=dir modules'
1659 # make M=dir modules_install
1660 #                      Install the modules built in the module directory
1661 #                      Assumes install directory is already created
1662
1663 # We are always building modules
1664 KBUILD_MODULES := 1
1665
1666 build-dirs := $(KBUILD_EXTMOD)
1667 PHONY += modules
1668 modules: descend
1669         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1670
1671 PHONY += modules_install
1672 modules_install: _emodinst_ _emodinst_post
1673
1674 install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
1675 PHONY += _emodinst_
1676 _emodinst_:
1677         $(Q)mkdir -p $(MODLIB)/$(install-dir)
1678         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1679
1680 PHONY += _emodinst_post
1681 _emodinst_post: _emodinst_
1682         $(call cmd,depmod)
1683
1684 clean-dirs := $(KBUILD_EXTMOD)
1685 clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers $(KBUILD_EXTMOD)/modules.nsdeps
1686
1687 PHONY += help
1688 help:
1689         @echo  '  Building external modules.'
1690         @echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
1691         @echo  ''
1692         @echo  '  modules         - default target, build the module(s)'
1693         @echo  '  modules_install - install the module'
1694         @echo  '  clean           - remove generated files in module directory only'
1695         @echo  ''
1696
1697 PHONY += prepare
1698 endif # KBUILD_EXTMOD
1699
1700 # Single targets
1701 # ---------------------------------------------------------------------------
1702 # To build individual files in subdirectories, you can do like this:
1703 #
1704 #   make foo/bar/baz.s
1705 #
1706 # The supported suffixes for single-target are listed in 'single-targets'
1707 #
1708 # To build only under specific subdirectories, you can do like this:
1709 #
1710 #   make foo/bar/baz/
1711
1712 ifdef single-build
1713
1714 # .ko is special because modpost is needed
1715 single-ko := $(sort $(filter %.ko, $(MAKECMDGOALS)))
1716 single-no-ko := $(sort $(patsubst %.ko,%.mod, $(MAKECMDGOALS)))
1717
1718 $(single-ko): single_modpost
1719         @:
1720 $(single-no-ko): descend
1721         @:
1722
1723 ifeq ($(KBUILD_EXTMOD),)
1724 # For the single build of in-tree modules, use a temporary file to avoid
1725 # the situation of modules_install installing an invalid modules.order.
1726 MODORDER := .modules.tmp
1727 endif
1728
1729 PHONY += single_modpost
1730 single_modpost: $(single-no-ko)
1731         $(Q){ $(foreach m, $(single-ko), echo $(extmod-prefix)$m;) } > $(MODORDER)
1732         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1733
1734 KBUILD_MODULES := 1
1735
1736 export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod-prefix), $(single-no-ko))
1737
1738 # trim unrelated directories
1739 build-dirs := $(foreach d, $(build-dirs), \
1740                         $(if $(filter $(d)/%, $(KBUILD_SINGLE_TARGETS)), $(d)))
1741
1742 endif
1743
1744 ifndef CONFIG_MODULES
1745 KBUILD_MODULES :=
1746 endif
1747
1748 # Handle descending into subdirectories listed in $(build-dirs)
1749 # Preset locale variables to speed up the build process. Limit locale
1750 # tweaks to this spot to avoid wrong language settings when running
1751 # make menuconfig etc.
1752 # Error messages still appears in the original language
1753 PHONY += descend $(build-dirs)
1754 descend: $(build-dirs)
1755 $(build-dirs): prepare
1756         $(Q)$(MAKE) $(build)=$@ \
1757         single-build=$(if $(filter-out $@/, $(filter $@/%, $(single-no-ko))),1) \
1758         need-builtin=1 need-modorder=1
1759
1760 clean-dirs := $(addprefix _clean_, $(clean-dirs))
1761 PHONY += $(clean-dirs) clean
1762 $(clean-dirs):
1763         $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1764
1765 clean: $(clean-dirs)
1766         $(call cmd,rmfiles)
1767         @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1768                 \( -name '*.[aios]' -o -name '*.ko' -o -name '.*.cmd' \
1769                 -o -name '*.ko.*' \
1770                 -o -name '*.dtb' -o -name '*.dtb.S' -o -name '*.dt.yaml' \
1771                 -o -name '*.dwo' -o -name '*.lst' \
1772                 -o -name '*.su' -o -name '*.mod' \
1773                 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1774                 -o -name '*.lex.c' -o -name '*.tab.[ch]' \
1775                 -o -name '*.asn1.[ch]' \
1776                 -o -name '*.symtypes' -o -name 'modules.order' \
1777                 -o -name '.tmp_*.o.*' \
1778                 -o -name '*.c.[012]*.*' \
1779                 -o -name '*.ll' \
1780                 -o -name '*.gcno' \) -type f -print | xargs rm -f
1781
1782 # Generate tags for editors
1783 # ---------------------------------------------------------------------------
1784 quiet_cmd_tags = GEN     $@
1785       cmd_tags = $(BASH) $(srctree)/scripts/tags.sh $@
1786
1787 tags TAGS cscope gtags: FORCE
1788         $(call cmd,tags)
1789
1790 # Script to generate missing namespace dependencies
1791 # ---------------------------------------------------------------------------
1792
1793 PHONY += nsdeps
1794 nsdeps: export KBUILD_NSDEPS=1
1795 nsdeps: modules
1796         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/nsdeps
1797
1798 # Scripts to check various things for consistency
1799 # ---------------------------------------------------------------------------
1800
1801 PHONY += includecheck versioncheck coccicheck namespacecheck export_report
1802
1803 includecheck:
1804         find $(srctree)/* $(RCS_FIND_IGNORE) \
1805                 -name '*.[hcS]' -type f -print | sort \
1806                 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
1807
1808 versioncheck:
1809         find $(srctree)/* $(RCS_FIND_IGNORE) \
1810                 -name '*.[hcS]' -type f -print | sort \
1811                 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
1812
1813 coccicheck:
1814         $(Q)$(BASH) $(srctree)/scripts/$@
1815
1816 namespacecheck:
1817         $(PERL) $(srctree)/scripts/namespace.pl
1818
1819 export_report:
1820         $(PERL) $(srctree)/scripts/export_report.pl
1821
1822 PHONY += checkstack kernelrelease kernelversion image_name
1823
1824 # UML needs a little special treatment here.  It wants to use the host
1825 # toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
1826 # else wants $(ARCH), including people doing cross-builds, which means
1827 # that $(SUBARCH) doesn't work here.
1828 ifeq ($(ARCH), um)
1829 CHECKSTACK_ARCH := $(SUBARCH)
1830 else
1831 CHECKSTACK_ARCH := $(ARCH)
1832 endif
1833 checkstack:
1834         $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
1835         $(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
1836
1837 kernelrelease:
1838         @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1839
1840 kernelversion:
1841         @echo $(KERNELVERSION)
1842
1843 image_name:
1844         @echo $(KBUILD_IMAGE)
1845
1846 # Clear a bunch of variables before executing the submake
1847
1848 ifeq ($(quiet),silent_)
1849 tools_silent=s
1850 endif
1851
1852 tools/: FORCE
1853         $(Q)mkdir -p $(objtree)/tools
1854         $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/
1855
1856 tools/%: FORCE
1857         $(Q)mkdir -p $(objtree)/tools
1858         $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
1859
1860 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
1861       cmd_rmfiles = rm -rf $(rm-files)
1862
1863 # Run depmod only if we have System.map and depmod is executable
1864 quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
1865       cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
1866                    $(KERNELRELEASE)
1867
1868 # read saved command lines for existing targets
1869 existing-targets := $(wildcard $(sort $(targets)))
1870
1871 -include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd)
1872
1873 endif # config-build
1874 endif # mixed-build
1875 endif # need-sub-make
1876
1877 PHONY += FORCE
1878 FORCE:
1879
1880 # Declare the contents of the PHONY variable as phony.  We keep that
1881 # information in a variable so we can use it in if_changed and friends.
1882 .PHONY: $(PHONY)