be2net: Bug fix to avoid disabling bottom half during firmware upgrade.
[linux/fpc-iii.git] / drivers / pnp / support.c
blobf5beb24d036a334b942b1dccaeb9494a76ffde72
1 /*
2 * support.c - standard functions for the use of pnp protocol drivers
4 * Copyright 2003 Adam Belay <ambx1@neo.rr.com>
5 * Copyright (C) 2008 Hewlett-Packard Development Company, L.P.
6 * Bjorn Helgaas <bjorn.helgaas@hp.com>
7 */
9 #include <linux/module.h>
10 #include <linux/ctype.h>
11 #include <linux/pnp.h>
12 #include "base.h"
14 /**
15 * pnp_is_active - Determines if a device is active based on its current
16 * resources
17 * @dev: pointer to the desired PnP device
19 int pnp_is_active(struct pnp_dev *dev)
22 * I don't think this is very reliable because pnp_disable_dev()
23 * only clears out auto-assigned resources.
25 if (!pnp_port_start(dev, 0) && pnp_port_len(dev, 0) <= 1 &&
26 !pnp_mem_start(dev, 0) && pnp_mem_len(dev, 0) <= 1 &&
27 pnp_irq(dev, 0) == -1 && pnp_dma(dev, 0) == -1)
28 return 0;
29 else
30 return 1;
33 EXPORT_SYMBOL(pnp_is_active);
36 * Functionally similar to acpi_ex_eisa_id_to_string(), but that's
37 * buried in the ACPI CA, and we can't depend on it being present.
39 void pnp_eisa_id_to_string(u32 id, char *str)
41 id = be32_to_cpu(id);
44 * According to the specs, the first three characters are five-bit
45 * compressed ASCII, and the left-over high order bit should be zero.
46 * However, the Linux ISAPNP code historically used six bits for the
47 * first character, and there seem to be IDs that depend on that,
48 * e.g., "nEC8241" in the Linux 8250_pnp serial driver and the
49 * FreeBSD sys/pc98/cbus/sio_cbus.c driver.
51 str[0] = 'A' + ((id >> 26) & 0x3f) - 1;
52 str[1] = 'A' + ((id >> 21) & 0x1f) - 1;
53 str[2] = 'A' + ((id >> 16) & 0x1f) - 1;
54 str[3] = hex_asc_hi(id >> 8);
55 str[4] = hex_asc_lo(id >> 8);
56 str[5] = hex_asc_hi(id);
57 str[6] = hex_asc_lo(id);
58 str[7] = '\0';
61 char *pnp_resource_type_name(struct resource *res)
63 switch (pnp_resource_type(res)) {
64 case IORESOURCE_IO:
65 return "io";
66 case IORESOURCE_MEM:
67 return "mem";
68 case IORESOURCE_IRQ:
69 return "irq";
70 case IORESOURCE_DMA:
71 return "dma";
72 case IORESOURCE_BUS:
73 return "bus";
75 return "unknown";
78 void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc)
80 struct pnp_resource *pnp_res;
82 if (list_empty(&dev->resources))
83 pnp_dbg(&dev->dev, "%s: no current resources\n", desc);
84 else {
85 pnp_dbg(&dev->dev, "%s: current resources:\n", desc);
86 list_for_each_entry(pnp_res, &dev->resources, list)
87 pnp_dbg(&dev->dev, "%pr\n", &pnp_res->res);
91 char *pnp_option_priority_name(struct pnp_option *option)
93 switch (pnp_option_priority(option)) {
94 case PNP_RES_PRIORITY_PREFERRED:
95 return "preferred";
96 case PNP_RES_PRIORITY_ACCEPTABLE:
97 return "acceptable";
98 case PNP_RES_PRIORITY_FUNCTIONAL:
99 return "functional";
101 return "invalid";
104 void dbg_pnp_show_option(struct pnp_dev *dev, struct pnp_option *option)
106 char buf[128];
107 int len = 0, i;
108 struct pnp_port *port;
109 struct pnp_mem *mem;
110 struct pnp_irq *irq;
111 struct pnp_dma *dma;
113 if (pnp_option_is_dependent(option))
114 len += scnprintf(buf + len, sizeof(buf) - len,
115 " dependent set %d (%s) ",
116 pnp_option_set(option),
117 pnp_option_priority_name(option));
118 else
119 len += scnprintf(buf + len, sizeof(buf) - len,
120 " independent ");
122 switch (option->type) {
123 case IORESOURCE_IO:
124 port = &option->u.port;
125 len += scnprintf(buf + len, sizeof(buf) - len, "io min %#llx "
126 "max %#llx align %lld size %lld flags %#x",
127 (unsigned long long) port->min,
128 (unsigned long long) port->max,
129 (unsigned long long) port->align,
130 (unsigned long long) port->size, port->flags);
131 break;
132 case IORESOURCE_MEM:
133 mem = &option->u.mem;
134 len += scnprintf(buf + len, sizeof(buf) - len, "mem min %#llx "
135 "max %#llx align %lld size %lld flags %#x",
136 (unsigned long long) mem->min,
137 (unsigned long long) mem->max,
138 (unsigned long long) mem->align,
139 (unsigned long long) mem->size, mem->flags);
140 break;
141 case IORESOURCE_IRQ:
142 irq = &option->u.irq;
143 len += scnprintf(buf + len, sizeof(buf) - len, "irq");
144 if (bitmap_empty(irq->map.bits, PNP_IRQ_NR))
145 len += scnprintf(buf + len, sizeof(buf) - len,
146 " <none>");
147 else {
148 for (i = 0; i < PNP_IRQ_NR; i++)
149 if (test_bit(i, irq->map.bits))
150 len += scnprintf(buf + len,
151 sizeof(buf) - len,
152 " %d", i);
154 len += scnprintf(buf + len, sizeof(buf) - len, " flags %#x",
155 irq->flags);
156 if (irq->flags & IORESOURCE_IRQ_OPTIONAL)
157 len += scnprintf(buf + len, sizeof(buf) - len,
158 " (optional)");
159 break;
160 case IORESOURCE_DMA:
161 dma = &option->u.dma;
162 len += scnprintf(buf + len, sizeof(buf) - len, "dma");
163 if (!dma->map)
164 len += scnprintf(buf + len, sizeof(buf) - len,
165 " <none>");
166 else {
167 for (i = 0; i < 8; i++)
168 if (dma->map & (1 << i))
169 len += scnprintf(buf + len,
170 sizeof(buf) - len,
171 " %d", i);
173 len += scnprintf(buf + len, sizeof(buf) - len, " (bitmask %#x) "
174 "flags %#x", dma->map, dma->flags);
175 break;
177 pnp_dbg(&dev->dev, "%s\n", buf);