2 * linux/arch/arm/common/locomo.c
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * This file contains all generic LoCoMo support.
12 * All initialization functions provided here are intended to be called
13 * from machine specific code with proper arguments when required.
18 #include <linux/module.h>
19 #include <linux/init.h>
20 #include <linux/kernel.h>
21 #include <linux/delay.h>
22 #include <linux/errno.h>
23 #include <linux/ioport.h>
24 #include <linux/platform_device.h>
25 #include <linux/slab.h>
26 #include <linux/spinlock.h>
28 #include <asm/hardware.h>
31 #include <asm/mach/irq.h>
33 #include <asm/hardware/locomo.h>
35 /* M62332 output channel selection */
36 #define M62332_EVR_CH 1 /* M62332 volume channel number */
37 /* 0 : CH.1 , 1 : CH. 2 */
39 #define M62332_SLAVE_ADDR 0x4e /* Slave address */
40 #define M62332_W_BIT 0x00 /* W bit (0 only) */
41 #define M62332_SUB_ADDR 0x00 /* Sub address */
42 #define M62332_A_BIT 0x00 /* A bit (0 only) */
44 /* DAC setup and hold times (expressed in us) */
45 #define DAC_BUS_FREE_TIME 5 /* 4.7 us */
46 #define DAC_START_SETUP_TIME 5 /* 4.7 us */
47 #define DAC_STOP_SETUP_TIME 4 /* 4.0 us */
48 #define DAC_START_HOLD_TIME 5 /* 4.7 us */
49 #define DAC_SCL_LOW_HOLD_TIME 5 /* 4.7 us */
50 #define DAC_SCL_HIGH_HOLD_TIME 4 /* 4.0 us */
51 #define DAC_DATA_SETUP_TIME 1 /* 250 ns */
52 #define DAC_DATA_HOLD_TIME 1 /* 300 ns */
53 #define DAC_LOW_SETUP_TIME 1 /* 300 ns */
54 #define DAC_HIGH_SETUP_TIME 1 /* 1000 ns */
56 /* the following is the overall data for the locomo chip */
65 struct locomo_dev_info
{
73 /* All the locomo devices. If offset is non-zero, the mapbase for the
74 * locomo_dev will be set to the chip base plus offset. If offset is
75 * zero, then the mapbase for the locomo_dev will be set to zero. An
76 * offset of zero means the device only uses GPIOs or other helper
77 * functions inside this file */
78 static struct locomo_dev_info locomo_devices
[] = {
80 .devid
= LOCOMO_DEVID_KEYBOARD
,
84 .name
= "locomo-keyboard",
85 .offset
= LOCOMO_KEYBOARD
,
89 .devid
= LOCOMO_DEVID_FRONTLIGHT
,
91 .name
= "locomo-frontlight",
92 .offset
= LOCOMO_FRONTLIGHT
,
97 .devid
= LOCOMO_DEVID_BACKLIGHT
,
99 .name
= "locomo-backlight",
100 .offset
= LOCOMO_BACKLIGHT
,
104 .devid
= LOCOMO_DEVID_AUDIO
,
106 .name
= "locomo-audio",
107 .offset
= LOCOMO_AUDIO
,
111 .devid
= LOCOMO_DEVID_LED
,
113 .name
= "locomo-led",
114 .offset
= LOCOMO_LED
,
118 .devid
= LOCOMO_DEVID_UART
,
120 .name
= "locomo-uart",
125 .devid
= LOCOMO_DEVID_SPI
,
127 .name
= "locomo-spi",
128 .offset
= LOCOMO_SPI
,
134 /** LoCoMo interrupt handling stuff.
135 * NOTE: LoCoMo has a 1 to many mapping on all of its IRQs.
136 * that is, there is only one real hardware interrupt
137 * we determine which interrupt it is by reading some IO memory.
138 * We have two levels of expansion, first in the handler for the
139 * hardware interrupt we generate an interrupt
140 * IRQ_LOCOMO_*_BASE and those handlers generate more interrupts
142 * hardware irq reads LOCOMO_ICR & 0x0f00
143 * IRQ_LOCOMO_KEY_BASE
144 * IRQ_LOCOMO_GPIO_BASE
146 * IRQ_LOCOMO_SPI_BASE
147 * IRQ_LOCOMO_KEY_BASE reads LOCOMO_KIC & 0x0001
149 * IRQ_LOCOMO_GPIO_BASE reads LOCOMO_GIR & LOCOMO_GPD & 0xffff
150 * IRQ_LOCOMO_GPIO[0-15]
151 * IRQ_LOCOMO_LT_BASE reads LOCOMO_LTINT & 0x0001
153 * IRQ_LOCOMO_SPI_BASE reads LOCOMO_SPIIR & 0x000F
156 * IRQ_LOCOMO_SPI_OVRN
157 * IRQ_LOCOMO_SPI_TEND
160 #define LOCOMO_IRQ_START (IRQ_LOCOMO_KEY_BASE)
161 #define LOCOMO_IRQ_KEY_START (IRQ_LOCOMO_KEY)
162 #define LOCOMO_IRQ_GPIO_START (IRQ_LOCOMO_GPIO0)
163 #define LOCOMO_IRQ_LT_START (IRQ_LOCOMO_LT)
164 #define LOCOMO_IRQ_SPI_START (IRQ_LOCOMO_SPI_RFR)
166 static void locomo_handler(unsigned int irq
, struct irq_desc
*desc
)
170 void __iomem
*mapbase
= get_irq_chip_data(irq
);
172 /* Acknowledge the parent IRQ */
173 desc
->chip
->ack(irq
);
175 /* check why this interrupt was generated */
176 req
= locomo_readl(mapbase
+ LOCOMO_ICR
) & 0x0f00;
179 /* generate the next interrupt(s) */
180 irq
= LOCOMO_IRQ_START
;
182 for (i
= 0; i
<= 3; i
++, d
++, irq
++) {
183 if (req
& (0x0100 << i
)) {
184 desc_handle_irq(irq
, d
);
191 static void locomo_ack_irq(unsigned int irq
)
195 static void locomo_mask_irq(unsigned int irq
)
197 void __iomem
*mapbase
= get_irq_chip_data(irq
);
199 r
= locomo_readl(mapbase
+ LOCOMO_ICR
);
200 r
&= ~(0x0010 << (irq
- LOCOMO_IRQ_START
));
201 locomo_writel(r
, mapbase
+ LOCOMO_ICR
);
204 static void locomo_unmask_irq(unsigned int irq
)
206 void __iomem
*mapbase
= get_irq_chip_data(irq
);
208 r
= locomo_readl(mapbase
+ LOCOMO_ICR
);
209 r
|= (0x0010 << (irq
- LOCOMO_IRQ_START
));
210 locomo_writel(r
, mapbase
+ LOCOMO_ICR
);
213 static struct irq_chip locomo_chip
= {
215 .ack
= locomo_ack_irq
,
216 .mask
= locomo_mask_irq
,
217 .unmask
= locomo_unmask_irq
,
220 static void locomo_key_handler(unsigned int irq
, struct irq_desc
*desc
)
223 void __iomem
*mapbase
= get_irq_chip_data(irq
);
225 if (locomo_readl(mapbase
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
) & 0x0001) {
226 d
= irq_desc
+ LOCOMO_IRQ_KEY_START
;
227 desc_handle_irq(LOCOMO_IRQ_KEY_START
, d
);
231 static void locomo_key_ack_irq(unsigned int irq
)
233 void __iomem
*mapbase
= get_irq_chip_data(irq
);
235 r
= locomo_readl(mapbase
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
236 r
&= ~(0x0100 << (irq
- LOCOMO_IRQ_KEY_START
));
237 locomo_writel(r
, mapbase
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
240 static void locomo_key_mask_irq(unsigned int irq
)
242 void __iomem
*mapbase
= get_irq_chip_data(irq
);
244 r
= locomo_readl(mapbase
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
245 r
&= ~(0x0010 << (irq
- LOCOMO_IRQ_KEY_START
));
246 locomo_writel(r
, mapbase
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
249 static void locomo_key_unmask_irq(unsigned int irq
)
251 void __iomem
*mapbase
= get_irq_chip_data(irq
);
253 r
= locomo_readl(mapbase
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
254 r
|= (0x0010 << (irq
- LOCOMO_IRQ_KEY_START
));
255 locomo_writel(r
, mapbase
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
258 static struct irq_chip locomo_key_chip
= {
259 .name
= "LOCOMO-key",
260 .ack
= locomo_key_ack_irq
,
261 .mask
= locomo_key_mask_irq
,
262 .unmask
= locomo_key_unmask_irq
,
265 static void locomo_gpio_handler(unsigned int irq
, struct irq_desc
*desc
)
269 void __iomem
*mapbase
= get_irq_chip_data(irq
);
271 req
= locomo_readl(mapbase
+ LOCOMO_GIR
) &
272 locomo_readl(mapbase
+ LOCOMO_GPD
) &
276 irq
= LOCOMO_IRQ_GPIO_START
;
277 d
= irq_desc
+ LOCOMO_IRQ_GPIO_START
;
278 for (i
= 0; i
<= 15; i
++, irq
++, d
++) {
279 if (req
& (0x0001 << i
)) {
280 desc_handle_irq(irq
, d
);
286 static void locomo_gpio_ack_irq(unsigned int irq
)
288 void __iomem
*mapbase
= get_irq_chip_data(irq
);
290 r
= locomo_readl(mapbase
+ LOCOMO_GWE
);
291 r
|= (0x0001 << (irq
- LOCOMO_IRQ_GPIO_START
));
292 locomo_writel(r
, mapbase
+ LOCOMO_GWE
);
294 r
= locomo_readl(mapbase
+ LOCOMO_GIS
);
295 r
&= ~(0x0001 << (irq
- LOCOMO_IRQ_GPIO_START
));
296 locomo_writel(r
, mapbase
+ LOCOMO_GIS
);
298 r
= locomo_readl(mapbase
+ LOCOMO_GWE
);
299 r
&= ~(0x0001 << (irq
- LOCOMO_IRQ_GPIO_START
));
300 locomo_writel(r
, mapbase
+ LOCOMO_GWE
);
303 static void locomo_gpio_mask_irq(unsigned int irq
)
305 void __iomem
*mapbase
= get_irq_chip_data(irq
);
307 r
= locomo_readl(mapbase
+ LOCOMO_GIE
);
308 r
&= ~(0x0001 << (irq
- LOCOMO_IRQ_GPIO_START
));
309 locomo_writel(r
, mapbase
+ LOCOMO_GIE
);
312 static void locomo_gpio_unmask_irq(unsigned int irq
)
314 void __iomem
*mapbase
= get_irq_chip_data(irq
);
316 r
= locomo_readl(mapbase
+ LOCOMO_GIE
);
317 r
|= (0x0001 << (irq
- LOCOMO_IRQ_GPIO_START
));
318 locomo_writel(r
, mapbase
+ LOCOMO_GIE
);
321 static struct irq_chip locomo_gpio_chip
= {
322 .name
= "LOCOMO-gpio",
323 .ack
= locomo_gpio_ack_irq
,
324 .mask
= locomo_gpio_mask_irq
,
325 .unmask
= locomo_gpio_unmask_irq
,
328 static void locomo_lt_handler(unsigned int irq
, struct irq_desc
*desc
)
331 void __iomem
*mapbase
= get_irq_chip_data(irq
);
333 if (locomo_readl(mapbase
+ LOCOMO_LTINT
) & 0x0001) {
334 d
= irq_desc
+ LOCOMO_IRQ_LT_START
;
335 desc_handle_irq(LOCOMO_IRQ_LT_START
, d
);
339 static void locomo_lt_ack_irq(unsigned int irq
)
341 void __iomem
*mapbase
= get_irq_chip_data(irq
);
343 r
= locomo_readl(mapbase
+ LOCOMO_LTINT
);
344 r
&= ~(0x0100 << (irq
- LOCOMO_IRQ_LT_START
));
345 locomo_writel(r
, mapbase
+ LOCOMO_LTINT
);
348 static void locomo_lt_mask_irq(unsigned int irq
)
350 void __iomem
*mapbase
= get_irq_chip_data(irq
);
352 r
= locomo_readl(mapbase
+ LOCOMO_LTINT
);
353 r
&= ~(0x0010 << (irq
- LOCOMO_IRQ_LT_START
));
354 locomo_writel(r
, mapbase
+ LOCOMO_LTINT
);
357 static void locomo_lt_unmask_irq(unsigned int irq
)
359 void __iomem
*mapbase
= get_irq_chip_data(irq
);
361 r
= locomo_readl(mapbase
+ LOCOMO_LTINT
);
362 r
|= (0x0010 << (irq
- LOCOMO_IRQ_LT_START
));
363 locomo_writel(r
, mapbase
+ LOCOMO_LTINT
);
366 static struct irq_chip locomo_lt_chip
= {
368 .ack
= locomo_lt_ack_irq
,
369 .mask
= locomo_lt_mask_irq
,
370 .unmask
= locomo_lt_unmask_irq
,
373 static void locomo_spi_handler(unsigned int irq
, struct irq_desc
*desc
)
377 void __iomem
*mapbase
= get_irq_chip_data(irq
);
379 req
= locomo_readl(mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIIR
) & 0x000F;
381 irq
= LOCOMO_IRQ_SPI_START
;
384 for (i
= 0; i
<= 3; i
++, irq
++, d
++) {
385 if (req
& (0x0001 << i
)) {
386 desc_handle_irq(irq
, d
);
392 static void locomo_spi_ack_irq(unsigned int irq
)
394 void __iomem
*mapbase
= get_irq_chip_data(irq
);
396 r
= locomo_readl(mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIWE
);
397 r
|= (0x0001 << (irq
- LOCOMO_IRQ_SPI_START
));
398 locomo_writel(r
, mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIWE
);
400 r
= locomo_readl(mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIIS
);
401 r
&= ~(0x0001 << (irq
- LOCOMO_IRQ_SPI_START
));
402 locomo_writel(r
, mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIIS
);
404 r
= locomo_readl(mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIWE
);
405 r
&= ~(0x0001 << (irq
- LOCOMO_IRQ_SPI_START
));
406 locomo_writel(r
, mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIWE
);
409 static void locomo_spi_mask_irq(unsigned int irq
)
411 void __iomem
*mapbase
= get_irq_chip_data(irq
);
413 r
= locomo_readl(mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIIE
);
414 r
&= ~(0x0001 << (irq
- LOCOMO_IRQ_SPI_START
));
415 locomo_writel(r
, mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIIE
);
418 static void locomo_spi_unmask_irq(unsigned int irq
)
420 void __iomem
*mapbase
= get_irq_chip_data(irq
);
422 r
= locomo_readl(mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIIE
);
423 r
|= (0x0001 << (irq
- LOCOMO_IRQ_SPI_START
));
424 locomo_writel(r
, mapbase
+ LOCOMO_SPI
+ LOCOMO_SPIIE
);
427 static struct irq_chip locomo_spi_chip
= {
428 .name
= "LOCOMO-spi",
429 .ack
= locomo_spi_ack_irq
,
430 .mask
= locomo_spi_mask_irq
,
431 .unmask
= locomo_spi_unmask_irq
,
434 static void locomo_setup_irq(struct locomo
*lchip
)
437 void __iomem
*irqbase
= lchip
->base
;
440 * Install handler for IRQ_LOCOMO_HW.
442 set_irq_type(lchip
->irq
, IRQT_FALLING
);
443 set_irq_chip_data(lchip
->irq
, irqbase
);
444 set_irq_chained_handler(lchip
->irq
, locomo_handler
);
446 /* Install handlers for IRQ_LOCOMO_*_BASE */
447 set_irq_chip(IRQ_LOCOMO_KEY_BASE
, &locomo_chip
);
448 set_irq_chip_data(IRQ_LOCOMO_KEY_BASE
, irqbase
);
449 set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE
, locomo_key_handler
);
450 set_irq_flags(IRQ_LOCOMO_KEY_BASE
, IRQF_VALID
| IRQF_PROBE
);
452 set_irq_chip(IRQ_LOCOMO_GPIO_BASE
, &locomo_chip
);
453 set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE
, irqbase
);
454 set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE
, locomo_gpio_handler
);
455 set_irq_flags(IRQ_LOCOMO_GPIO_BASE
, IRQF_VALID
| IRQF_PROBE
);
457 set_irq_chip(IRQ_LOCOMO_LT_BASE
, &locomo_chip
);
458 set_irq_chip_data(IRQ_LOCOMO_LT_BASE
, irqbase
);
459 set_irq_chained_handler(IRQ_LOCOMO_LT_BASE
, locomo_lt_handler
);
460 set_irq_flags(IRQ_LOCOMO_LT_BASE
, IRQF_VALID
| IRQF_PROBE
);
462 set_irq_chip(IRQ_LOCOMO_SPI_BASE
, &locomo_chip
);
463 set_irq_chip_data(IRQ_LOCOMO_SPI_BASE
, irqbase
);
464 set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE
, locomo_spi_handler
);
465 set_irq_flags(IRQ_LOCOMO_SPI_BASE
, IRQF_VALID
| IRQF_PROBE
);
467 /* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
468 set_irq_chip(LOCOMO_IRQ_KEY_START
, &locomo_key_chip
);
469 set_irq_chip_data(LOCOMO_IRQ_KEY_START
, irqbase
);
470 set_irq_handler(LOCOMO_IRQ_KEY_START
, handle_edge_irq
);
471 set_irq_flags(LOCOMO_IRQ_KEY_START
, IRQF_VALID
| IRQF_PROBE
);
473 /* install handlers for IRQ_LOCOMO_GPIO_BASE generated interrupts */
474 for (irq
= LOCOMO_IRQ_GPIO_START
; irq
< LOCOMO_IRQ_GPIO_START
+ 16; irq
++) {
475 set_irq_chip(irq
, &locomo_gpio_chip
);
476 set_irq_chip_data(irq
, irqbase
);
477 set_irq_handler(irq
, handle_edge_irq
);
478 set_irq_flags(irq
, IRQF_VALID
| IRQF_PROBE
);
481 /* install handlers for IRQ_LOCOMO_LT_BASE generated interrupts */
482 set_irq_chip(LOCOMO_IRQ_LT_START
, &locomo_lt_chip
);
483 set_irq_chip_data(LOCOMO_IRQ_LT_START
, irqbase
);
484 set_irq_handler(LOCOMO_IRQ_LT_START
, handle_edge_irq
);
485 set_irq_flags(LOCOMO_IRQ_LT_START
, IRQF_VALID
| IRQF_PROBE
);
487 /* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
488 for (irq
= LOCOMO_IRQ_SPI_START
; irq
< LOCOMO_IRQ_SPI_START
+ 3; irq
++) {
489 set_irq_chip(irq
, &locomo_spi_chip
);
490 set_irq_chip_data(irq
, irqbase
);
491 set_irq_handler(irq
, handle_edge_irq
);
492 set_irq_flags(irq
, IRQF_VALID
| IRQF_PROBE
);
497 static void locomo_dev_release(struct device
*_dev
)
499 struct locomo_dev
*dev
= LOCOMO_DEV(_dev
);
505 locomo_init_one_child(struct locomo
*lchip
, struct locomo_dev_info
*info
)
507 struct locomo_dev
*dev
;
510 dev
= kzalloc(sizeof(struct locomo_dev
), GFP_KERNEL
);
516 strncpy(dev
->dev
.bus_id
, info
->name
, sizeof(dev
->dev
.bus_id
));
518 * If the parent device has a DMA mask associated with it,
519 * propagate it down to the children.
521 if (lchip
->dev
->dma_mask
) {
522 dev
->dma_mask
= *lchip
->dev
->dma_mask
;
523 dev
->dev
.dma_mask
= &dev
->dma_mask
;
526 dev
->devid
= info
->devid
;
527 dev
->dev
.parent
= lchip
->dev
;
528 dev
->dev
.bus
= &locomo_bus_type
;
529 dev
->dev
.release
= locomo_dev_release
;
530 dev
->dev
.coherent_dma_mask
= lchip
->dev
->coherent_dma_mask
;
533 dev
->mapbase
= lchip
->base
+ info
->offset
;
536 dev
->length
= info
->length
;
538 memmove(dev
->irq
, info
->irq
, sizeof(dev
->irq
));
540 ret
= device_register(&dev
->dev
);
550 struct locomo_save_data
{
558 static int locomo_suspend(struct platform_device
*dev
, pm_message_t state
)
560 struct locomo
*lchip
= platform_get_drvdata(dev
);
561 struct locomo_save_data
*save
;
564 save
= kmalloc(sizeof(struct locomo_save_data
), GFP_KERNEL
);
568 dev
->dev
.power
.saved_state
= (void *) save
;
570 spin_lock_irqsave(&lchip
->lock
, flags
);
572 save
->LCM_GPO
= locomo_readl(lchip
->base
+ LOCOMO_GPO
); /* GPIO */
573 locomo_writel(0x00, lchip
->base
+ LOCOMO_GPO
);
574 save
->LCM_SPICT
= locomo_readl(lchip
->base
+ LOCOMO_SPICT
); /* SPI */
575 locomo_writel(0x40, lchip
->base
+ LOCOMO_SPICT
);
576 save
->LCM_GPE
= locomo_readl(lchip
->base
+ LOCOMO_GPE
); /* GPIO */
577 locomo_writel(0x00, lchip
->base
+ LOCOMO_GPE
);
578 save
->LCM_ASD
= locomo_readl(lchip
->base
+ LOCOMO_ASD
); /* ADSTART */
579 locomo_writel(0x00, lchip
->base
+ LOCOMO_ASD
);
580 save
->LCM_SPIMD
= locomo_readl(lchip
->base
+ LOCOMO_SPIMD
); /* SPI */
581 locomo_writel(0x3C14, lchip
->base
+ LOCOMO_SPIMD
);
583 locomo_writel(0x00, lchip
->base
+ LOCOMO_PAIF
);
584 locomo_writel(0x00, lchip
->base
+ LOCOMO_DAC
);
585 locomo_writel(0x00, lchip
->base
+ LOCOMO_BACKLIGHT
+ LOCOMO_TC
);
587 if ( (locomo_readl(lchip
->base
+ LOCOMO_LED
+ LOCOMO_LPT0
) & 0x88) && (locomo_readl(lchip
->base
+ LOCOMO_LED
+ LOCOMO_LPT1
) & 0x88) )
588 locomo_writel(0x00, lchip
->base
+ LOCOMO_C32K
); /* CLK32 off */
590 /* 18MHz already enabled, so no wait */
591 locomo_writel(0xc1, lchip
->base
+ LOCOMO_C32K
); /* CLK32 on */
593 locomo_writel(0x00, lchip
->base
+ LOCOMO_TADC
); /* 18MHz clock off*/
594 locomo_writel(0x00, lchip
->base
+ LOCOMO_AUDIO
+ LOCOMO_ACC
); /* 22MHz/24MHz clock off */
595 locomo_writel(0x00, lchip
->base
+ LOCOMO_FRONTLIGHT
+ LOCOMO_ALS
); /* FL */
597 spin_unlock_irqrestore(&lchip
->lock
, flags
);
602 static int locomo_resume(struct platform_device
*dev
)
604 struct locomo
*lchip
= platform_get_drvdata(dev
);
605 struct locomo_save_data
*save
;
609 save
= (struct locomo_save_data
*) dev
->dev
.power
.saved_state
;
613 spin_lock_irqsave(&lchip
->lock
, flags
);
615 locomo_writel(save
->LCM_GPO
, lchip
->base
+ LOCOMO_GPO
);
616 locomo_writel(save
->LCM_SPICT
, lchip
->base
+ LOCOMO_SPICT
);
617 locomo_writel(save
->LCM_GPE
, lchip
->base
+ LOCOMO_GPE
);
618 locomo_writel(save
->LCM_ASD
, lchip
->base
+ LOCOMO_ASD
);
619 locomo_writel(save
->LCM_SPIMD
, lchip
->base
+ LOCOMO_SPIMD
);
621 locomo_writel(0x00, lchip
->base
+ LOCOMO_C32K
);
622 locomo_writel(0x90, lchip
->base
+ LOCOMO_TADC
);
624 locomo_writel(0, lchip
->base
+ LOCOMO_KEYBOARD
+ LOCOMO_KSC
);
625 r
= locomo_readl(lchip
->base
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
627 locomo_writel(r
, lchip
->base
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
628 locomo_writel(0x1, lchip
->base
+ LOCOMO_KEYBOARD
+ LOCOMO_KCMD
);
630 spin_unlock_irqrestore(&lchip
->lock
, flags
);
639 * locomo_probe - probe for a single LoCoMo chip.
640 * @phys_addr: physical address of device.
642 * Probe for a LoCoMo chip. This must be called
643 * before any other locomo-specific code.
646 * %-ENODEV device not found.
647 * %-EBUSY physical address already marked in-use.
651 __locomo_probe(struct device
*me
, struct resource
*mem
, int irq
)
653 struct locomo
*lchip
;
655 int i
, ret
= -ENODEV
;
657 lchip
= kzalloc(sizeof(struct locomo
), GFP_KERNEL
);
661 spin_lock_init(&lchip
->lock
);
664 dev_set_drvdata(lchip
->dev
, lchip
);
666 lchip
->phys
= mem
->start
;
670 * Map the whole region. This also maps the
671 * registers for our children.
673 lchip
->base
= ioremap(mem
->start
, PAGE_SIZE
);
679 /* locomo initialize */
680 locomo_writel(0, lchip
->base
+ LOCOMO_ICR
);
682 locomo_writel(0, lchip
->base
+ LOCOMO_KEYBOARD
+ LOCOMO_KIC
);
685 locomo_writel(0, lchip
->base
+ LOCOMO_GPO
);
686 locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
687 , lchip
->base
+ LOCOMO_GPE
);
688 locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
689 , lchip
->base
+ LOCOMO_GPD
);
690 locomo_writel(0, lchip
->base
+ LOCOMO_GIE
);
693 locomo_writel(0, lchip
->base
+ LOCOMO_FRONTLIGHT
+ LOCOMO_ALS
);
694 locomo_writel(0, lchip
->base
+ LOCOMO_FRONTLIGHT
+ LOCOMO_ALD
);
697 locomo_writel(0, lchip
->base
+ LOCOMO_LTINT
);
699 locomo_writel(0, lchip
->base
+ LOCOMO_SPIIE
);
701 locomo_writel(6 + 8 + 320 + 30 - 10, lchip
->base
+ LOCOMO_ASD
);
702 r
= locomo_readl(lchip
->base
+ LOCOMO_ASD
);
704 locomo_writel(r
, lchip
->base
+ LOCOMO_ASD
);
706 locomo_writel(6 + 8 + 320 + 30 - 10 - 128 + 4, lchip
->base
+ LOCOMO_HSD
);
707 r
= locomo_readl(lchip
->base
+ LOCOMO_HSD
);
709 locomo_writel(r
, lchip
->base
+ LOCOMO_HSD
);
711 locomo_writel(128 / 8, lchip
->base
+ LOCOMO_HSC
);
714 locomo_writel(0x80, lchip
->base
+ LOCOMO_TADC
);
717 r
= locomo_readl(lchip
->base
+ LOCOMO_TADC
);
719 locomo_writel(r
, lchip
->base
+ LOCOMO_TADC
);
723 r
= locomo_readl(lchip
->base
+ LOCOMO_DAC
);
724 r
|= LOCOMO_DAC_SCLOEB
| LOCOMO_DAC_SDAOEB
;
725 locomo_writel(r
, lchip
->base
+ LOCOMO_DAC
);
727 r
= locomo_readl(lchip
->base
+ LOCOMO_VER
);
728 printk(KERN_INFO
"LoCoMo Chip: %lu%lu\n", (r
>> 8), (r
& 0xff));
731 * The interrupt controller must be initialised before any
732 * other device to ensure that the interrupts are available.
734 if (lchip
->irq
!= NO_IRQ
)
735 locomo_setup_irq(lchip
);
737 for (i
= 0; i
< ARRAY_SIZE(locomo_devices
); i
++)
738 locomo_init_one_child(lchip
, &locomo_devices
[i
]);
746 static int locomo_remove_child(struct device
*dev
, void *data
)
748 device_unregister(dev
);
752 static void __locomo_remove(struct locomo
*lchip
)
754 device_for_each_child(lchip
->dev
, NULL
, locomo_remove_child
);
756 if (lchip
->irq
!= NO_IRQ
) {
757 set_irq_chained_handler(lchip
->irq
, NULL
);
758 set_irq_data(lchip
->irq
, NULL
);
761 iounmap(lchip
->base
);
765 static int locomo_probe(struct platform_device
*dev
)
767 struct resource
*mem
;
770 mem
= platform_get_resource(dev
, IORESOURCE_MEM
, 0);
773 irq
= platform_get_irq(dev
, 0);
777 return __locomo_probe(&dev
->dev
, mem
, irq
);
780 static int locomo_remove(struct platform_device
*dev
)
782 struct locomo
*lchip
= platform_get_drvdata(dev
);
785 __locomo_remove(lchip
);
786 platform_set_drvdata(dev
, NULL
);
793 * Not sure if this should be on the system bus or not yet.
794 * We really want some way to register a system device at
795 * the per-machine level, and then have this driver pick
796 * up the registered devices.
798 static struct platform_driver locomo_device_driver
= {
799 .probe
= locomo_probe
,
800 .remove
= locomo_remove
,
802 .suspend
= locomo_suspend
,
803 .resume
= locomo_resume
,
811 * Get the parent device driver (us) structure
812 * from a child function device
814 static inline struct locomo
*locomo_chip_driver(struct locomo_dev
*ldev
)
816 return (struct locomo
*)dev_get_drvdata(ldev
->dev
.parent
);
819 void locomo_gpio_set_dir(struct device
*dev
, unsigned int bits
, unsigned int dir
)
821 struct locomo
*lchip
= dev_get_drvdata(dev
);
828 spin_lock_irqsave(&lchip
->lock
, flags
);
830 r
= locomo_readl(lchip
->base
+ LOCOMO_GPD
);
832 locomo_writel(r
, lchip
->base
+ LOCOMO_GPD
);
834 r
= locomo_readl(lchip
->base
+ LOCOMO_GPE
);
839 locomo_writel(r
, lchip
->base
+ LOCOMO_GPE
);
841 spin_unlock_irqrestore(&lchip
->lock
, flags
);
844 int locomo_gpio_read_level(struct device
*dev
, unsigned int bits
)
846 struct locomo
*lchip
= dev_get_drvdata(dev
);
853 spin_lock_irqsave(&lchip
->lock
, flags
);
854 ret
= locomo_readl(lchip
->base
+ LOCOMO_GPL
);
855 spin_unlock_irqrestore(&lchip
->lock
, flags
);
861 int locomo_gpio_read_output(struct device
*dev
, unsigned int bits
)
863 struct locomo
*lchip
= dev_get_drvdata(dev
);
870 spin_lock_irqsave(&lchip
->lock
, flags
);
871 ret
= locomo_readl(lchip
->base
+ LOCOMO_GPO
);
872 spin_unlock_irqrestore(&lchip
->lock
, flags
);
878 void locomo_gpio_write(struct device
*dev
, unsigned int bits
, unsigned int set
)
880 struct locomo
*lchip
= dev_get_drvdata(dev
);
887 spin_lock_irqsave(&lchip
->lock
, flags
);
889 r
= locomo_readl(lchip
->base
+ LOCOMO_GPO
);
894 locomo_writel(r
, lchip
->base
+ LOCOMO_GPO
);
896 spin_unlock_irqrestore(&lchip
->lock
, flags
);
899 static void locomo_m62332_sendbit(void *mapbase
, int bit
)
903 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
904 r
&= ~(LOCOMO_DAC_SCLOEB
);
905 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
906 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
907 udelay(DAC_DATA_HOLD_TIME
); /* 300 nsec */
908 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
909 r
&= ~(LOCOMO_DAC_SCLOEB
);
910 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
911 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
912 udelay(DAC_SCL_LOW_HOLD_TIME
); /* 4.7 usec */
915 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
916 r
|= LOCOMO_DAC_SDAOEB
;
917 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
918 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
920 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
921 r
&= ~(LOCOMO_DAC_SDAOEB
);
922 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
923 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
926 udelay(DAC_DATA_SETUP_TIME
); /* 250 nsec */
927 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
928 r
|= LOCOMO_DAC_SCLOEB
;
929 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
930 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
931 udelay(DAC_SCL_HIGH_HOLD_TIME
); /* 4.0 usec */
934 void locomo_m62332_senddata(struct locomo_dev
*ldev
, unsigned int dac_data
, int channel
)
936 struct locomo
*lchip
= locomo_chip_driver(ldev
);
940 void *mapbase
= lchip
->base
;
943 spin_lock_irqsave(&lchip
->lock
, flags
);
946 udelay(DAC_BUS_FREE_TIME
); /* 5.0 usec */
947 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
948 r
|= LOCOMO_DAC_SCLOEB
| LOCOMO_DAC_SDAOEB
;
949 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
950 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
951 udelay(DAC_SCL_HIGH_HOLD_TIME
); /* 4.0 usec */
952 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
953 r
&= ~(LOCOMO_DAC_SDAOEB
);
954 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
955 udelay(DAC_START_HOLD_TIME
); /* 5.0 usec */
956 udelay(DAC_DATA_HOLD_TIME
); /* 300 nsec */
958 /* Send slave address and W bit (LSB is W bit) */
959 data
= (M62332_SLAVE_ADDR
<< 1) | M62332_W_BIT
;
960 for (i
= 1; i
<= 8; i
++) {
961 locomo_m62332_sendbit(mapbase
, data
>> (8 - i
));
965 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
966 r
&= ~(LOCOMO_DAC_SCLOEB
);
967 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
968 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
969 udelay(DAC_SCL_LOW_HOLD_TIME
); /* 4.7 usec */
970 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
971 r
&= ~(LOCOMO_DAC_SDAOEB
);
972 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
973 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
974 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
975 r
|= LOCOMO_DAC_SCLOEB
;
976 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
977 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
978 udelay(DAC_SCL_HIGH_HOLD_TIME
); /* 4.7 usec */
979 if (locomo_readl(mapbase
+ LOCOMO_DAC
) & LOCOMO_DAC_SDAOEB
) { /* High is error */
980 printk(KERN_WARNING
"locomo: m62332_senddata Error 1\n");
984 /* Send Sub address (LSB is channel select) */
985 /* channel = 0 : ch1 select */
986 /* = 1 : ch2 select */
987 data
= M62332_SUB_ADDR
+ channel
;
988 for (i
= 1; i
<= 8; i
++) {
989 locomo_m62332_sendbit(mapbase
, data
>> (8 - i
));
993 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
994 r
&= ~(LOCOMO_DAC_SCLOEB
);
995 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
996 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
997 udelay(DAC_SCL_LOW_HOLD_TIME
); /* 4.7 usec */
998 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
999 r
&= ~(LOCOMO_DAC_SDAOEB
);
1000 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1001 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
1002 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1003 r
|= LOCOMO_DAC_SCLOEB
;
1004 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1005 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
1006 udelay(DAC_SCL_HIGH_HOLD_TIME
); /* 4.7 usec */
1007 if (locomo_readl(mapbase
+ LOCOMO_DAC
) & LOCOMO_DAC_SDAOEB
) { /* High is error */
1008 printk(KERN_WARNING
"locomo: m62332_senddata Error 2\n");
1013 for (i
= 1; i
<= 8; i
++) {
1014 locomo_m62332_sendbit(mapbase
, dac_data
>> (8 - i
));
1018 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1019 r
&= ~(LOCOMO_DAC_SCLOEB
);
1020 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1021 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
1022 udelay(DAC_SCL_LOW_HOLD_TIME
); /* 4.7 usec */
1023 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1024 r
&= ~(LOCOMO_DAC_SDAOEB
);
1025 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1026 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
1027 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1028 r
|= LOCOMO_DAC_SCLOEB
;
1029 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1030 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
1031 udelay(DAC_SCL_HIGH_HOLD_TIME
); /* 4.7 usec */
1032 if (locomo_readl(mapbase
+ LOCOMO_DAC
) & LOCOMO_DAC_SDAOEB
) { /* High is error */
1033 printk(KERN_WARNING
"locomo: m62332_senddata Error 3\n");
1038 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1039 r
&= ~(LOCOMO_DAC_SCLOEB
);
1040 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1041 udelay(DAC_LOW_SETUP_TIME
); /* 300 nsec */
1042 udelay(DAC_SCL_LOW_HOLD_TIME
); /* 4.7 usec */
1043 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1044 r
|= LOCOMO_DAC_SCLOEB
;
1045 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1046 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
1047 udelay(DAC_SCL_HIGH_HOLD_TIME
); /* 4 usec */
1048 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1049 r
|= LOCOMO_DAC_SDAOEB
;
1050 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1051 udelay(DAC_HIGH_SETUP_TIME
); /* 1000 nsec */
1052 udelay(DAC_SCL_HIGH_HOLD_TIME
); /* 4 usec */
1054 r
= locomo_readl(mapbase
+ LOCOMO_DAC
);
1055 r
|= LOCOMO_DAC_SCLOEB
| LOCOMO_DAC_SDAOEB
;
1056 locomo_writel(r
, mapbase
+ LOCOMO_DAC
);
1057 udelay(DAC_LOW_SETUP_TIME
); /* 1000 nsec */
1058 udelay(DAC_SCL_LOW_HOLD_TIME
); /* 4.7 usec */
1060 spin_unlock_irqrestore(&lchip
->lock
, flags
);
1064 * Frontlight control
1067 static struct locomo
*locomo_chip_driver(struct locomo_dev
*ldev
);
1069 void locomo_frontlight_set(struct locomo_dev
*dev
, int duty
, int vr
, int bpwf
)
1071 unsigned long flags
;
1072 struct locomo
*lchip
= locomo_chip_driver(dev
);
1075 locomo_gpio_write(dev
->dev
.parent
, LOCOMO_GPIO_FL_VR
, 1);
1077 locomo_gpio_write(dev
->dev
.parent
, LOCOMO_GPIO_FL_VR
, 0);
1079 spin_lock_irqsave(&lchip
->lock
, flags
);
1080 locomo_writel(bpwf
, lchip
->base
+ LOCOMO_FRONTLIGHT
+ LOCOMO_ALS
);
1082 locomo_writel(duty
, lchip
->base
+ LOCOMO_FRONTLIGHT
+ LOCOMO_ALD
);
1083 locomo_writel(bpwf
| LOCOMO_ALC_EN
, lchip
->base
+ LOCOMO_FRONTLIGHT
+ LOCOMO_ALS
);
1084 spin_unlock_irqrestore(&lchip
->lock
, flags
);
1088 * LoCoMo "Register Access Bus."
1090 * We model this as a regular bus type, and hang devices directly
1093 static int locomo_match(struct device
*_dev
, struct device_driver
*_drv
)
1095 struct locomo_dev
*dev
= LOCOMO_DEV(_dev
);
1096 struct locomo_driver
*drv
= LOCOMO_DRV(_drv
);
1098 return dev
->devid
== drv
->devid
;
1101 static int locomo_bus_suspend(struct device
*dev
, pm_message_t state
)
1103 struct locomo_dev
*ldev
= LOCOMO_DEV(dev
);
1104 struct locomo_driver
*drv
= LOCOMO_DRV(dev
->driver
);
1107 if (drv
&& drv
->suspend
)
1108 ret
= drv
->suspend(ldev
, state
);
1112 static int locomo_bus_resume(struct device
*dev
)
1114 struct locomo_dev
*ldev
= LOCOMO_DEV(dev
);
1115 struct locomo_driver
*drv
= LOCOMO_DRV(dev
->driver
);
1118 if (drv
&& drv
->resume
)
1119 ret
= drv
->resume(ldev
);
1123 static int locomo_bus_probe(struct device
*dev
)
1125 struct locomo_dev
*ldev
= LOCOMO_DEV(dev
);
1126 struct locomo_driver
*drv
= LOCOMO_DRV(dev
->driver
);
1130 ret
= drv
->probe(ldev
);
1134 static int locomo_bus_remove(struct device
*dev
)
1136 struct locomo_dev
*ldev
= LOCOMO_DEV(dev
);
1137 struct locomo_driver
*drv
= LOCOMO_DRV(dev
->driver
);
1141 ret
= drv
->remove(ldev
);
1145 struct bus_type locomo_bus_type
= {
1146 .name
= "locomo-bus",
1147 .match
= locomo_match
,
1148 .probe
= locomo_bus_probe
,
1149 .remove
= locomo_bus_remove
,
1150 .suspend
= locomo_bus_suspend
,
1151 .resume
= locomo_bus_resume
,
1154 int locomo_driver_register(struct locomo_driver
*driver
)
1156 driver
->drv
.bus
= &locomo_bus_type
;
1157 return driver_register(&driver
->drv
);
1160 void locomo_driver_unregister(struct locomo_driver
*driver
)
1162 driver_unregister(&driver
->drv
);
1165 static int __init
locomo_init(void)
1167 int ret
= bus_register(&locomo_bus_type
);
1169 platform_driver_register(&locomo_device_driver
);
1173 static void __exit
locomo_exit(void)
1175 platform_driver_unregister(&locomo_device_driver
);
1176 bus_unregister(&locomo_bus_type
);
1179 module_init(locomo_init
);
1180 module_exit(locomo_exit
);
1182 MODULE_DESCRIPTION("Sharp LoCoMo core driver");
1183 MODULE_LICENSE("GPL");
1184 MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
1186 EXPORT_SYMBOL(locomo_driver_register
);
1187 EXPORT_SYMBOL(locomo_driver_unregister
);
1188 EXPORT_SYMBOL(locomo_gpio_set_dir
);
1189 EXPORT_SYMBOL(locomo_gpio_read_level
);
1190 EXPORT_SYMBOL(locomo_gpio_read_output
);
1191 EXPORT_SYMBOL(locomo_gpio_write
);
1192 EXPORT_SYMBOL(locomo_m62332_senddata
);