toshiba_acpi: Add ECO mode led support

[linux/fpc-iii.git] / drivers / spi / spi.c

/*
 * SPI init/core code
 *
 * Copyright (C) 2005 David Brownell
 * Copyright (C) 2008 Secret Lab Technologies Ltd.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/kernel.h>
#include <linux/kmod.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/cache.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/mutex.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/slab.h>
#include <linux/mod_devicetable.h>
#include <linux/spi/spi.h>
#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <linux/export.h>
#include <linux/sched/rt.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/ioport.h>
#include <linux/acpi.h>

#define CREATE_TRACE_POINTS
#include <trace/events/spi.h>

static void spidev_release(struct device *dev)
{
        struct spi_device       *spi = to_spi_device(dev);

        /* spi masters may cleanup for released devices */
        if (spi->master->cleanup)
                spi->master->cleanup(spi);

        spi_master_put(spi->master);
        kfree(spi);
}

static ssize_t
modalias_show(struct device *dev, struct device_attribute *a, char *buf)
{
        const struct spi_device *spi = to_spi_device(dev);
        int len;

        len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
        if (len != -ENODEV)
                return len;

        return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
}
static DEVICE_ATTR_RO(modalias);

static struct attribute *spi_dev_attrs[] = {
        &dev_attr_modalias.attr,
        NULL,
};
ATTRIBUTE_GROUPS(spi_dev);

/* modalias support makes "modprobe $MODALIAS" new-style hotplug work,
 * and the sysfs version makes coldplug work too.
 */

static const struct spi_device_id *spi_match_id(const struct spi_device_id *id,
                                                const struct spi_device *sdev)
{
        while (id->name[0]) {
                if (!strcmp(sdev->modalias, id->name))
                        return id;
                id++;
        }
        return NULL;
}

const struct spi_device_id *spi_get_device_id(const struct spi_device *sdev)
{
        const struct spi_driver *sdrv = to_spi_driver(sdev->dev.driver);

        return spi_match_id(sdrv->id_table, sdev);
}
EXPORT_SYMBOL_GPL(spi_get_device_id);

static int spi_match_device(struct device *dev, struct device_driver *drv)
{
        const struct spi_device *spi = to_spi_device(dev);
        const struct spi_driver *sdrv = to_spi_driver(drv);

        /* Attempt an OF style match */
        if (of_driver_match_device(dev, drv))
                return 1;

        /* Then try ACPI */
        if (acpi_driver_match_device(dev, drv))
                return 1;

        if (sdrv->id_table)
                return !!spi_match_id(sdrv->id_table, spi);

        return strcmp(spi->modalias, drv->name) == 0;
}

static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
{
        const struct spi_device         *spi = to_spi_device(dev);
        int rc;

        rc = acpi_device_uevent_modalias(dev, env);
        if (rc != -ENODEV)
                return rc;

        add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias);
        return 0;
}

#ifdef CONFIG_PM_SLEEP
static int spi_legacy_suspend(struct device *dev, pm_message_t message)
{
        int                     value = 0;
        struct spi_driver       *drv = to_spi_driver(dev->driver);

        /* suspend will stop irqs and dma; no more i/o */
        if (drv) {
                if (drv->suspend)
                        value = drv->suspend(to_spi_device(dev), message);
                else
                        dev_dbg(dev, "... can't suspend\n");
        }
        return value;
}

static int spi_legacy_resume(struct device *dev)
{
        int                     value = 0;
        struct spi_driver       *drv = to_spi_driver(dev->driver);

        /* resume may restart the i/o queue */
        if (drv) {
                if (drv->resume)
                        value = drv->resume(to_spi_device(dev));
                else
                        dev_dbg(dev, "... can't resume\n");
        }
        return value;
}

static int spi_pm_suspend(struct device *dev)
{
        const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;

        if (pm)
                return pm_generic_suspend(dev);
        else
                return spi_legacy_suspend(dev, PMSG_SUSPEND);
}

static int spi_pm_resume(struct device *dev)
{
        const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;

        if (pm)
                return pm_generic_resume(dev);
        else
                return spi_legacy_resume(dev);
}

static int spi_pm_freeze(struct device *dev)
{
        const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;

        if (pm)
                return pm_generic_freeze(dev);
        else
                return spi_legacy_suspend(dev, PMSG_FREEZE);
}

static int spi_pm_thaw(struct device *dev)
{
        const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;

        if (pm)
                return pm_generic_thaw(dev);
        else
                return spi_legacy_resume(dev);
}

static int spi_pm_poweroff(struct device *dev)
{
        const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;

        if (pm)
                return pm_generic_poweroff(dev);
        else
                return spi_legacy_suspend(dev, PMSG_HIBERNATE);
}

static int spi_pm_restore(struct device *dev)
{
        const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;

        if (pm)
                return pm_generic_restore(dev);
        else
                return spi_legacy_resume(dev);
}
#else
#define spi_pm_suspend  NULL
#define spi_pm_resume   NULL
#define spi_pm_freeze   NULL
#define spi_pm_thaw     NULL
#define spi_pm_poweroff NULL
#define spi_pm_restore  NULL
#endif

static const struct dev_pm_ops spi_pm = {
        .suspend = spi_pm_suspend,
        .resume = spi_pm_resume,
        .freeze = spi_pm_freeze,
        .thaw = spi_pm_thaw,
        .poweroff = spi_pm_poweroff,
        .restore = spi_pm_restore,
        SET_RUNTIME_PM_OPS(
                pm_generic_runtime_suspend,
                pm_generic_runtime_resume,
                NULL
        )
};

struct bus_type spi_bus_type = {
        .name           = "spi",
        .dev_groups     = spi_dev_groups,
        .match          = spi_match_device,
        .uevent         = spi_uevent,
        .pm             = &spi_pm,
};
EXPORT_SYMBOL_GPL(spi_bus_type);


static int spi_drv_probe(struct device *dev)
{
        const struct spi_driver         *sdrv = to_spi_driver(dev->driver);
        int ret;

        acpi_dev_pm_attach(dev, true);
        ret = sdrv->probe(to_spi_device(dev));
        if (ret)
                acpi_dev_pm_detach(dev, true);

        return ret;
}

static int spi_drv_remove(struct device *dev)
{
        const struct spi_driver         *sdrv = to_spi_driver(dev->driver);
        int ret;

        ret = sdrv->remove(to_spi_device(dev));
        acpi_dev_pm_detach(dev, true);

        return ret;
}

static void spi_drv_shutdown(struct device *dev)
{
        const struct spi_driver         *sdrv = to_spi_driver(dev->driver);

        sdrv->shutdown(to_spi_device(dev));
}

/**
 * spi_register_driver - register a SPI driver
 * @sdrv: the driver to register
 * Context: can sleep
 */
int spi_register_driver(struct spi_driver *sdrv)
{
        sdrv->driver.bus = &spi_bus_type;
        if (sdrv->probe)
                sdrv->driver.probe = spi_drv_probe;
        if (sdrv->remove)
                sdrv->driver.remove = spi_drv_remove;
        if (sdrv->shutdown)
                sdrv->driver.shutdown = spi_drv_shutdown;
        return driver_register(&sdrv->driver);
}
EXPORT_SYMBOL_GPL(spi_register_driver);

/*-------------------------------------------------------------------------*/

/* SPI devices should normally not be created by SPI device drivers; that
 * would make them board-specific.  Similarly with SPI master drivers.
 * Device registration normally goes into like arch/.../mach.../board-YYY.c
 * with other readonly (flashable) information about mainboard devices.
 */

struct boardinfo {
        struct list_head        list;
        struct spi_board_info   board_info;
};

static LIST_HEAD(board_list);
static LIST_HEAD(spi_master_list);

/*
 * Used to protect add/del opertion for board_info list and
 * spi_master list, and their matching process
 */
static DEFINE_MUTEX(board_lock);

/**
 * spi_alloc_device - Allocate a new SPI device
 * @master: Controller to which device is connected
 * Context: can sleep
 *
 * Allows a driver to allocate and initialize a spi_device without
 * registering it immediately.  This allows a driver to directly
 * fill the spi_device with device parameters before calling
 * spi_add_device() on it.
 *
 * Caller is responsible to call spi_add_device() on the returned
 * spi_device structure to add it to the SPI master.  If the caller
 * needs to discard the spi_device without adding it, then it should
 * call spi_dev_put() on it.
 *
 * Returns a pointer to the new device, or NULL.
 */
struct spi_device *spi_alloc_device(struct spi_master *master)
{
        struct spi_device       *spi;
        struct device           *dev = master->dev.parent;

        if (!spi_master_get(master))
                return NULL;

        spi = kzalloc(sizeof(*spi), GFP_KERNEL);
        if (!spi) {
                dev_err(dev, "cannot alloc spi_device\n");
                spi_master_put(master);
                return NULL;
        }

        spi->master = master;
        spi->dev.parent = &master->dev;
        spi->dev.bus = &spi_bus_type;
        spi->dev.release = spidev_release;
        spi->cs_gpio = -ENOENT;
        device_initialize(&spi->dev);
        return spi;
}
EXPORT_SYMBOL_GPL(spi_alloc_device);

static void spi_dev_set_name(struct spi_device *spi)
{
        struct acpi_device *adev = ACPI_COMPANION(&spi->dev);

        if (adev) {
                dev_set_name(&spi->dev, "spi-%s", acpi_dev_name(adev));
                return;
        }

        dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->master->dev),
                     spi->chip_select);
}

static int spi_dev_check(struct device *dev, void *data)
{
        struct spi_device *spi = to_spi_device(dev);
        struct spi_device *new_spi = data;

        if (spi->master == new_spi->master &&
            spi->chip_select == new_spi->chip_select)
                return -EBUSY;
        return 0;
}

/**
 * spi_add_device - Add spi_device allocated with spi_alloc_device
 * @spi: spi_device to register
 *
 * Companion function to spi_alloc_device.  Devices allocated with
 * spi_alloc_device can be added onto the spi bus with this function.
 *
 * Returns 0 on success; negative errno on failure
 */
int spi_add_device(struct spi_device *spi)
{
        static DEFINE_MUTEX(spi_add_lock);
        struct spi_master *master = spi->master;
        struct device *dev = master->dev.parent;
        int status;

        /* Chipselects are numbered 0..max; validate. */
        if (spi->chip_select >= master->num_chipselect) {
                dev_err(dev, "cs%d >= max %d\n",
                        spi->chip_select,
                        master->num_chipselect);
                return -EINVAL;
        }

        /* Set the bus ID string */
        spi_dev_set_name(spi);

        /* We need to make sure there's no other device with this
         * chipselect **BEFORE** we call setup(), else we'll trash
         * its configuration.  Lock against concurrent add() calls.
         */
        mutex_lock(&spi_add_lock);

        status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check);
        if (status) {
                dev_err(dev, "chipselect %d already in use\n",
                                spi->chip_select);
                goto done;
        }

        if (master->cs_gpios)
                spi->cs_gpio = master->cs_gpios[spi->chip_select];

        /* Drivers may modify this initial i/o setup, but will
         * normally rely on the device being setup.  Devices
         * using SPI_CS_HIGH can't coexist well otherwise...
         */
        status = spi_setup(spi);
        if (status < 0) {
                dev_err(dev, "can't setup %s, status %d\n",
                                dev_name(&spi->dev), status);
                goto done;
        }

        /* Device may be bound to an active driver when this returns */
        status = device_add(&spi->dev);
        if (status < 0)
                dev_err(dev, "can't add %s, status %d\n",
                                dev_name(&spi->dev), status);
        else
                dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));

done:
        mutex_unlock(&spi_add_lock);
        return status;
}
EXPORT_SYMBOL_GPL(spi_add_device);

/**
 * spi_new_device - instantiate one new SPI device
 * @master: Controller to which device is connected
 * @chip: Describes the SPI device
 * Context: can sleep
 *
 * On typical mainboards, this is purely internal; and it's not needed
 * after board init creates the hard-wired devices.  Some development
 * platforms may not be able to use spi_register_board_info though, and
 * this is exported so that for example a USB or parport based adapter
 * driver could add devices (which it would learn about out-of-band).
 *
 * Returns the new device, or NULL.
 */
struct spi_device *spi_new_device(struct spi_master *master,
                                  struct spi_board_info *chip)
{
        struct spi_device       *proxy;
        int                     status;

        /* NOTE:  caller did any chip->bus_num checks necessary.
         *
         * Also, unless we change the return value convention to use
         * error-or-pointer (not NULL-or-pointer), troubleshootability
         * suggests syslogged diagnostics are best here (ugh).
         */

        proxy = spi_alloc_device(master);
        if (!proxy)
                return NULL;

        WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));

        proxy->chip_select = chip->chip_select;
        proxy->max_speed_hz = chip->max_speed_hz;
        proxy->mode = chip->mode;
        proxy->irq = chip->irq;
        strlcpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias));
        proxy->dev.platform_data = (void *) chip->platform_data;
        proxy->controller_data = chip->controller_data;
        proxy->controller_state = NULL;

        status = spi_add_device(proxy);
        if (status < 0) {
                spi_dev_put(proxy);
                return NULL;
        }

        return proxy;
}
EXPORT_SYMBOL_GPL(spi_new_device);

static void spi_match_master_to_boardinfo(struct spi_master *master,
                                struct spi_board_info *bi)
{
        struct spi_device *dev;

        if (master->bus_num != bi->bus_num)
                return;

        dev = spi_new_device(master, bi);
        if (!dev)
                dev_err(master->dev.parent, "can't create new device for %s\n",
                        bi->modalias);
}

/**
 * spi_register_board_info - register SPI devices for a given board
 * @info: array of chip descriptors
 * @n: how many descriptors are provided
 * Context: can sleep
 *
 * Board-specific early init code calls this (probably during arch_initcall)
 * with segments of the SPI device table.  Any device nodes are created later,
 * after the relevant parent SPI controller (bus_num) is defined.  We keep
 * this table of devices forever, so that reloading a controller driver will
 * not make Linux forget about these hard-wired devices.
 *
 * Other code can also call this, e.g. a particular add-on board might provide
 * SPI devices through its expansion connector, so code initializing that board
 * would naturally declare its SPI devices.
 *
 * The board info passed can safely be __initdata ... but be careful of
 * any embedded pointers (platform_data, etc), they're copied as-is.
 */
int spi_register_board_info(struct spi_board_info const *info, unsigned n)
{
        struct boardinfo *bi;
        int i;

        bi = kzalloc(n * sizeof(*bi), GFP_KERNEL);
        if (!bi)
                return -ENOMEM;

        for (i = 0; i < n; i++, bi++, info++) {
                struct spi_master *master;

                memcpy(&bi->board_info, info, sizeof(*info));
                mutex_lock(&board_lock);
                list_add_tail(&bi->list, &board_list);
                list_for_each_entry(master, &spi_master_list, list)
                        spi_match_master_to_boardinfo(master, &bi->board_info);
                mutex_unlock(&board_lock);
        }

        return 0;
}

/*-------------------------------------------------------------------------*/

static void spi_set_cs(struct spi_device *spi, bool enable)
{
        if (spi->mode & SPI_CS_HIGH)
                enable = !enable;

        if (spi->cs_gpio >= 0)
                gpio_set_value(spi->cs_gpio, !enable);
        else if (spi->master->set_cs)
                spi->master->set_cs(spi, !enable);
}

static int spi_map_buf(struct spi_master *master, struct device *dev,
                       struct sg_table *sgt, void *buf, size_t len,
                       enum dma_data_direction dir)
{
        const bool vmalloced_buf = is_vmalloc_addr(buf);
        const int desc_len = vmalloced_buf ? PAGE_SIZE : master->max_dma_len;
        const int sgs = DIV_ROUND_UP(len, desc_len);
        struct page *vm_page;
        void *sg_buf;
        size_t min;
        int i, ret;

        ret = sg_alloc_table(sgt, sgs, GFP_KERNEL);
        if (ret != 0)
                return ret;

        for (i = 0; i < sgs; i++) {
                min = min_t(size_t, len, desc_len);

                if (vmalloced_buf) {
                        vm_page = vmalloc_to_page(buf);
                        if (!vm_page) {
                                sg_free_table(sgt);
                                return -ENOMEM;
                        }
                        sg_buf = page_address(vm_page) +
                                ((size_t)buf & ~PAGE_MASK);
                } else {
                        sg_buf = buf;
                }

                sg_set_buf(&sgt->sgl[i], sg_buf, min);

                buf += min;
                len -= min;
        }

        ret = dma_map_sg(dev, sgt->sgl, sgt->nents, dir);
        if (ret < 0) {
                sg_free_table(sgt);
                return ret;
        }

        sgt->nents = ret;

        return 0;
}

static void spi_unmap_buf(struct spi_master *master, struct device *dev,
                          struct sg_table *sgt, enum dma_data_direction dir)
{
        if (sgt->orig_nents) {
                dma_unmap_sg(dev, sgt->sgl, sgt->orig_nents, dir);
                sg_free_table(sgt);
        }
}

static int spi_map_msg(struct spi_master *master, struct spi_message *msg)
{
        struct device *tx_dev, *rx_dev;
        struct spi_transfer *xfer;
        void *tmp;
        unsigned int max_tx, max_rx;
        int ret;

        if (master->flags & (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX)) {
                max_tx = 0;
                max_rx = 0;

                list_for_each_entry(xfer, &msg->transfers, transfer_list) {
                        if ((master->flags & SPI_MASTER_MUST_TX) &&
                            !xfer->tx_buf)
                                max_tx = max(xfer->len, max_tx);
                        if ((master->flags & SPI_MASTER_MUST_RX) &&
                            !xfer->rx_buf)
                                max_rx = max(xfer->len, max_rx);
                }

                if (max_tx) {
                        tmp = krealloc(master->dummy_tx, max_tx,
                                       GFP_KERNEL | GFP_DMA);
                        if (!tmp)
                                return -ENOMEM;
                        master->dummy_tx = tmp;
                        memset(tmp, 0, max_tx);
                }

                if (max_rx) {
                        tmp = krealloc(master->dummy_rx, max_rx,
                                       GFP_KERNEL | GFP_DMA);
                        if (!tmp)
                                return -ENOMEM;
                        master->dummy_rx = tmp;
                }

                if (max_tx || max_rx) {
                        list_for_each_entry(xfer, &msg->transfers,
                                            transfer_list) {
                                if (!xfer->tx_buf)
                                        xfer->tx_buf = master->dummy_tx;
                                if (!xfer->rx_buf)
                                        xfer->rx_buf = master->dummy_rx;
                        }
                }
        }

        if (!master->can_dma)
                return 0;

        tx_dev = &master->dma_tx->dev->device;
        rx_dev = &master->dma_rx->dev->device;

        list_for_each_entry(xfer, &msg->transfers, transfer_list) {
                if (!master->can_dma(master, msg->spi, xfer))
                        continue;

                if (xfer->tx_buf != NULL) {
                        ret = spi_map_buf(master, tx_dev, &xfer->tx_sg,
                                          (void *)xfer->tx_buf, xfer->len,
                                          DMA_TO_DEVICE);
                        if (ret != 0)
                                return ret;
                }

                if (xfer->rx_buf != NULL) {
                        ret = spi_map_buf(master, rx_dev, &xfer->rx_sg,
                                          xfer->rx_buf, xfer->len,
                                          DMA_FROM_DEVICE);
                        if (ret != 0) {
                                spi_unmap_buf(master, tx_dev, &xfer->tx_sg,
                                              DMA_TO_DEVICE);
                                return ret;
                        }
                }
        }

        master->cur_msg_mapped = true;

        return 0;
}

static int spi_unmap_msg(struct spi_master *master, struct spi_message *msg)
{
        struct spi_transfer *xfer;
        struct device *tx_dev, *rx_dev;

        if (!master->cur_msg_mapped || !master->can_dma)
                return 0;

        tx_dev = &master->dma_tx->dev->device;
        rx_dev = &master->dma_rx->dev->device;

        list_for_each_entry(xfer, &msg->transfers, transfer_list) {
                if (!master->can_dma(master, msg->spi, xfer))
                        continue;

                spi_unmap_buf(master, rx_dev, &xfer->rx_sg, DMA_FROM_DEVICE);
                spi_unmap_buf(master, tx_dev, &xfer->tx_sg, DMA_TO_DEVICE);
        }

        return 0;
}

/*
 * spi_transfer_one_message - Default implementation of transfer_one_message()
 *
 * This is a standard implementation of transfer_one_message() for
 * drivers which impelment a transfer_one() operation.  It provides
 * standard handling of delays and chip select management.
 */
static int spi_transfer_one_message(struct spi_master *master,
                                    struct spi_message *msg)
{
        struct spi_transfer *xfer;
        bool keep_cs = false;
        int ret = 0;
        int ms = 1;

        spi_set_cs(msg->spi, true);

        list_for_each_entry(xfer, &msg->transfers, transfer_list) {
                trace_spi_transfer_start(msg, xfer);

                reinit_completion(&master->xfer_completion);

                ret = master->transfer_one(master, msg->spi, xfer);
                if (ret < 0) {
                        dev_err(&msg->spi->dev,
                                "SPI transfer failed: %d\n", ret);
                        goto out;
                }

                if (ret > 0) {
                        ret = 0;
                        ms = xfer->len * 8 * 1000 / xfer->speed_hz;
                        ms += 10; /* some tolerance */

                        ms = wait_for_completion_timeout(&master->xfer_completion,
                                                         msecs_to_jiffies(ms));
                }

                if (ms == 0) {
                        dev_err(&msg->spi->dev, "SPI transfer timed out\n");
                        msg->status = -ETIMEDOUT;
                }

                trace_spi_transfer_stop(msg, xfer);

                if (msg->status != -EINPROGRESS)
                        goto out;

                if (xfer->delay_usecs)
                        udelay(xfer->delay_usecs);

                if (xfer->cs_change) {
                        if (list_is_last(&xfer->transfer_list,
                                         &msg->transfers)) {
                                keep_cs = true;
                        } else {
                                spi_set_cs(msg->spi, false);
                                udelay(10);
                                spi_set_cs(msg->spi, true);
                        }
                }

                msg->actual_length += xfer->len;
        }

out:
        if (ret != 0 || !keep_cs)
                spi_set_cs(msg->spi, false);

        if (msg->status == -EINPROGRESS)
                msg->status = ret;

        spi_finalize_current_message(master);

        return ret;
}

/**
 * spi_finalize_current_transfer - report completion of a transfer
 *
 * Called by SPI drivers using the core transfer_one_message()
 * implementation to notify it that the current interrupt driven
 * transfer has finished and the next one may be scheduled.
 */
void spi_finalize_current_transfer(struct spi_master *master)
{
        complete(&master->xfer_completion);
}
EXPORT_SYMBOL_GPL(spi_finalize_current_transfer);

/**
 * spi_pump_messages - kthread work function which processes spi message queue
 * @work: pointer to kthread work struct contained in the master struct
 *
 * This function checks if there is any spi message in the queue that
 * needs processing and if so call out to the driver to initialize hardware
 * and transfer each message.
 *
 */
static void spi_pump_messages(struct kthread_work *work)
{
        struct spi_master *master =
                container_of(work, struct spi_master, pump_messages);
        unsigned long flags;
        bool was_busy = false;
        int ret;

        /* Lock queue and check for queue work */
        spin_lock_irqsave(&master->queue_lock, flags);
        if (list_empty(&master->queue) || !master->running) {
                if (!master->busy) {
                        spin_unlock_irqrestore(&master->queue_lock, flags);
                        return;
                }
                master->busy = false;
                spin_unlock_irqrestore(&master->queue_lock, flags);
                kfree(master->dummy_rx);
                master->dummy_rx = NULL;
                kfree(master->dummy_tx);
                master->dummy_tx = NULL;
                if (master->unprepare_transfer_hardware &&
                    master->unprepare_transfer_hardware(master))
                        dev_err(&master->dev,
                                "failed to unprepare transfer hardware\n");
                if (master->auto_runtime_pm) {
                        pm_runtime_mark_last_busy(master->dev.parent);
                        pm_runtime_put_autosuspend(master->dev.parent);
                }
                trace_spi_master_idle(master);
                return;
        }

        /* Make sure we are not already running a message */
        if (master->cur_msg) {
                spin_unlock_irqrestore(&master->queue_lock, flags);
                return;
        }
        /* Extract head of queue */
        master->cur_msg =
                list_first_entry(&master->queue, struct spi_message, queue);

        list_del_init(&master->cur_msg->queue);
        if (master->busy)
                was_busy = true;
        else
                master->busy = true;
        spin_unlock_irqrestore(&master->queue_lock, flags);

        if (!was_busy && master->auto_runtime_pm) {
                ret = pm_runtime_get_sync(master->dev.parent);
                if (ret < 0) {
                        dev_err(&master->dev, "Failed to power device: %d\n",
                                ret);
                        return;
                }
        }

        if (!was_busy)
                trace_spi_master_busy(master);

        if (!was_busy && master->prepare_transfer_hardware) {
                ret = master->prepare_transfer_hardware(master);
                if (ret) {
                        dev_err(&master->dev,
                                "failed to prepare transfer hardware\n");

                        if (master->auto_runtime_pm)
                                pm_runtime_put(master->dev.parent);
                        return;
                }
        }

        trace_spi_message_start(master->cur_msg);

        if (master->prepare_message) {
                ret = master->prepare_message(master, master->cur_msg);
                if (ret) {
                        dev_err(&master->dev,
                                "failed to prepare message: %d\n", ret);
                        master->cur_msg->status = ret;
                        spi_finalize_current_message(master);
                        return;
                }
                master->cur_msg_prepared = true;
        }

        ret = spi_map_msg(master, master->cur_msg);
        if (ret) {
                master->cur_msg->status = ret;
                spi_finalize_current_message(master);
                return;
        }

        ret = master->transfer_one_message(master, master->cur_msg);
        if (ret) {
                dev_err(&master->dev,
                        "failed to transfer one message from queue\n");
                return;
        }
}

static int spi_init_queue(struct spi_master *master)
{
        struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 };

        INIT_LIST_HEAD(&master->queue);
        spin_lock_init(&master->queue_lock);

        master->running = false;
        master->busy = false;

        init_kthread_worker(&master->kworker);
        master->kworker_task = kthread_run(kthread_worker_fn,
                                           &master->kworker, "%s",
                                           dev_name(&master->dev));
        if (IS_ERR(master->kworker_task)) {
                dev_err(&master->dev, "failed to create message pump task\n");
                return -ENOMEM;
        }
        init_kthread_work(&master->pump_messages, spi_pump_messages);

        /*
         * Master config will indicate if this controller should run the
         * message pump with high (realtime) priority to reduce the transfer
         * latency on the bus by minimising the delay between a transfer
         * request and the scheduling of the message pump thread. Without this
         * setting the message pump thread will remain at default priority.
         */
        if (master->rt) {
                dev_info(&master->dev,
                        "will run message pump with realtime priority\n");
                sched_setscheduler(master->kworker_task, SCHED_FIFO, &param);
        }

        return 0;
}

/**
 * spi_get_next_queued_message() - called by driver to check for queued
 * messages
 * @master: the master to check for queued messages
 *
 * If there are more messages in the queue, the next message is returned from
 * this call.
 */
struct spi_message *spi_get_next_queued_message(struct spi_master *master)
{
        struct spi_message *next;
        unsigned long flags;

        /* get a pointer to the next message, if any */
        spin_lock_irqsave(&master->queue_lock, flags);
        next = list_first_entry_or_null(&master->queue, struct spi_message,
                                        queue);
        spin_unlock_irqrestore(&master->queue_lock, flags);

        return next;
}
EXPORT_SYMBOL_GPL(spi_get_next_queued_message);

/**
 * spi_finalize_current_message() - the current message is complete
 * @master: the master to return the message to
 *
 * Called by the driver to notify the core that the message in the front of the
 * queue is complete and can be removed from the queue.
 */
void spi_finalize_current_message(struct spi_master *master)
{
        struct spi_message *mesg;
        unsigned long flags;
        int ret;

        spin_lock_irqsave(&master->queue_lock, flags);
        mesg = master->cur_msg;
        master->cur_msg = NULL;

        queue_kthread_work(&master->kworker, &master->pump_messages);
        spin_unlock_irqrestore(&master->queue_lock, flags);

        spi_unmap_msg(master, mesg);

        if (master->cur_msg_prepared && master->unprepare_message) {
                ret = master->unprepare_message(master, mesg);
                if (ret) {
                        dev_err(&master->dev,
                                "failed to unprepare message: %d\n", ret);
                }
        }
        master->cur_msg_prepared = false;

        mesg->state = NULL;
        if (mesg->complete)
                mesg->complete(mesg->context);

        trace_spi_message_done(mesg);
}
EXPORT_SYMBOL_GPL(spi_finalize_current_message);

static int spi_start_queue(struct spi_master *master)
{
        unsigned long flags;

        spin_lock_irqsave(&master->queue_lock, flags);

        if (master->running || master->busy) {
                spin_unlock_irqrestore(&master->queue_lock, flags);
                return -EBUSY;
        }

        master->running = true;
        master->cur_msg = NULL;
        spin_unlock_irqrestore(&master->queue_lock, flags);

        queue_kthread_work(&master->kworker, &master->pump_messages);

        return 0;
}

static int spi_stop_queue(struct spi_master *master)
{
        unsigned long flags;
        unsigned limit = 500;
        int ret = 0;

        spin_lock_irqsave(&master->queue_lock, flags);

        /*
         * This is a bit lame, but is optimized for the common execution path.
         * A wait_queue on the master->busy could be used, but then the common
         * execution path (pump_messages) would be required to call wake_up or
         * friends on every SPI message. Do this instead.
         */
        while ((!list_empty(&master->queue) || master->busy) && limit--) {
                spin_unlock_irqrestore(&master->queue_lock, flags);
                usleep_range(10000, 11000);
                spin_lock_irqsave(&master->queue_lock, flags);
        }

        if (!list_empty(&master->queue) || master->busy)
                ret = -EBUSY;
        else
                master->running = false;

        spin_unlock_irqrestore(&master->queue_lock, flags);

        if (ret) {
                dev_warn(&master->dev,
                         "could not stop message queue\n");
                return ret;
        }
        return ret;
}

static int spi_destroy_queue(struct spi_master *master)
{
        int ret;

        ret = spi_stop_queue(master);

        /*
         * flush_kthread_worker will block until all work is done.
         * If the reason that stop_queue timed out is that the work will never
         * finish, then it does no good to call flush/stop thread, so
         * return anyway.
         */
        if (ret) {
                dev_err(&master->dev, "problem destroying queue\n");
                return ret;
        }

        flush_kthread_worker(&master->kworker);
        kthread_stop(master->kworker_task);

        return 0;
}

/**
 * spi_queued_transfer - transfer function for queued transfers
 * @spi: spi device which is requesting transfer
 * @msg: spi message which is to handled is queued to driver queue
 */
static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg)
{
        struct spi_master *master = spi->master;
        unsigned long flags;

        spin_lock_irqsave(&master->queue_lock, flags);

        if (!master->running) {
                spin_unlock_irqrestore(&master->queue_lock, flags);
                return -ESHUTDOWN;
        }
        msg->actual_length = 0;
        msg->status = -EINPROGRESS;

        list_add_tail(&msg->queue, &master->queue);
        if (!master->busy)
                queue_kthread_work(&master->kworker, &master->pump_messages);

        spin_unlock_irqrestore(&master->queue_lock, flags);
        return 0;
}

static int spi_master_initialize_queue(struct spi_master *master)
{
        int ret;

        master->queued = true;
        master->transfer = spi_queued_transfer;
        if (!master->transfer_one_message)
                master->transfer_one_message = spi_transfer_one_message;

        /* Initialize and start queue */
        ret = spi_init_queue(master);
        if (ret) {
                dev_err(&master->dev, "problem initializing queue\n");
                goto err_init_queue;
        }
        ret = spi_start_queue(master);
        if (ret) {
                dev_err(&master->dev, "problem starting queue\n");
                goto err_start_queue;
        }

        return 0;

err_start_queue:
err_init_queue:
        spi_destroy_queue(master);
        return ret;
}

/*-------------------------------------------------------------------------*/

#if defined(CONFIG_OF)
/**
 * of_register_spi_devices() - Register child devices onto the SPI bus
 * @master:     Pointer to spi_master device
 *
 * Registers an spi_device for each child node of master node which has a 'reg'
 * property.
 */
static void of_register_spi_devices(struct spi_master *master)
{
        struct spi_device *spi;
        struct device_node *nc;
        int rc;
        u32 value;

        if (!master->dev.of_node)
                return;

        for_each_available_child_of_node(master->dev.of_node, nc) {
                /* Alloc an spi_device */
                spi = spi_alloc_device(master);
                if (!spi) {
                        dev_err(&master->dev, "spi_device alloc error for %s\n",
                                nc->full_name);
                        spi_dev_put(spi);
                        continue;
                }

                /* Select device driver */
                if (of_modalias_node(nc, spi->modalias,
                                     sizeof(spi->modalias)) < 0) {
                        dev_err(&master->dev, "cannot find modalias for %s\n",
                                nc->full_name);
                        spi_dev_put(spi);
                        continue;
                }

                /* Device address */
                rc = of_property_read_u32(nc, "reg", &value);
                if (rc) {
                        dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n",
                                nc->full_name, rc);
                        spi_dev_put(spi);
                        continue;
                }
                spi->chip_select = value;

                /* Mode (clock phase/polarity/etc.) */
                if (of_find_property(nc, "spi-cpha", NULL))
                        spi->mode |= SPI_CPHA;
                if (of_find_property(nc, "spi-cpol", NULL))
                        spi->mode |= SPI_CPOL;
                if (of_find_property(nc, "spi-cs-high", NULL))
                        spi->mode |= SPI_CS_HIGH;
                if (of_find_property(nc, "spi-3wire", NULL))
                        spi->mode |= SPI_3WIRE;

                /* Device DUAL/QUAD mode */
                if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
                        switch (value) {
                        case 1:
                                break;
                        case 2:
                                spi->mode |= SPI_TX_DUAL;
                                break;
                        case 4:
                                spi->mode |= SPI_TX_QUAD;
                                break;
                        default:
                                dev_err(&master->dev,
                                        "spi-tx-bus-width %d not supported\n",
                                        value);
                                spi_dev_put(spi);
                                continue;
                        }
                }

                if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) {
                        switch (value) {
                        case 1:
                                break;
                        case 2:
                                spi->mode |= SPI_RX_DUAL;
                                break;
                        case 4:
                                spi->mode |= SPI_RX_QUAD;
                                break;
                        default:
                                dev_err(&master->dev,
                                        "spi-rx-bus-width %d not supported\n",
                                        value);
                                spi_dev_put(spi);
                                continue;
                        }
                }

                /* Device speed */
                rc = of_property_read_u32(nc, "spi-max-frequency", &value);
                if (rc) {
                        dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n",
                                nc->full_name, rc);
                        spi_dev_put(spi);
                        continue;
                }
                spi->max_speed_hz = value;

                /* IRQ */
                spi->irq = irq_of_parse_and_map(nc, 0);

                /* Store a pointer to the node in the device structure */
                of_node_get(nc);
                spi->dev.of_node = nc;

                /* Register the new device */
                request_module("%s%s", SPI_MODULE_PREFIX, spi->modalias);
                rc = spi_add_device(spi);
                if (rc) {
                        dev_err(&master->dev, "spi_device register error %s\n",
                                nc->full_name);
                        spi_dev_put(spi);
                }

        }
}
#else
static void of_register_spi_devices(struct spi_master *master) { }
#endif

#ifdef CONFIG_ACPI
static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
{
        struct spi_device *spi = data;

        if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
                struct acpi_resource_spi_serialbus *sb;

                sb = &ares->data.spi_serial_bus;
                if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
                        spi->chip_select = sb->device_selection;
                        spi->max_speed_hz = sb->connection_speed;

                        if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
                                spi->mode |= SPI_CPHA;
                        if (sb->clock_polarity == ACPI_SPI_START_HIGH)
                                spi->mode |= SPI_CPOL;
                        if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH)
                                spi->mode |= SPI_CS_HIGH;
                }
        } else if (spi->irq < 0) {
                struct resource r;

                if (acpi_dev_resource_interrupt(ares, 0, &r))
                        spi->irq = r.start;
        }

        /* Always tell the ACPI core to skip this resource */
        return 1;
}

static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
                                       void *data, void **return_value)
{
        struct spi_master *master = data;
        struct list_head resource_list;
        struct acpi_device *adev;
        struct spi_device *spi;
        int ret;

        if (acpi_bus_get_device(handle, &adev))
                return AE_OK;
        if (acpi_bus_get_status(adev) || !adev->status.present)
                return AE_OK;

        spi = spi_alloc_device(master);
        if (!spi) {
                dev_err(&master->dev, "failed to allocate SPI device for %s\n",
                        dev_name(&adev->dev));
                return AE_NO_MEMORY;
        }

        ACPI_COMPANION_SET(&spi->dev, adev);
        spi->irq = -1;

        INIT_LIST_HEAD(&resource_list);
        ret = acpi_dev_get_resources(adev, &resource_list,
                                     acpi_spi_add_resource, spi);
        acpi_dev_free_resource_list(&resource_list);

        if (ret < 0 || !spi->max_speed_hz) {
                spi_dev_put(spi);
                return AE_OK;
        }

        adev->power.flags.ignore_parent = true;
        strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias));
        if (spi_add_device(spi)) {
                adev->power.flags.ignore_parent = false;
                dev_err(&master->dev, "failed to add SPI device %s from ACPI\n",
                        dev_name(&adev->dev));
                spi_dev_put(spi);
        }

        return AE_OK;
}

static void acpi_register_spi_devices(struct spi_master *master)
{
        acpi_status status;
        acpi_handle handle;

        handle = ACPI_HANDLE(master->dev.parent);
        if (!handle)
                return;

        status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
                                     acpi_spi_add_device, NULL,
                                     master, NULL);
        if (ACPI_FAILURE(status))
                dev_warn(&master->dev, "failed to enumerate SPI slaves\n");
}
#else
static inline void acpi_register_spi_devices(struct spi_master *master) {}
#endif /* CONFIG_ACPI */

static void spi_master_release(struct device *dev)
{
        struct spi_master *master;

        master = container_of(dev, struct spi_master, dev);
        kfree(master);
}

static struct class spi_master_class = {
        .name           = "spi_master",
        .owner          = THIS_MODULE,
        .dev_release    = spi_master_release,
};



/**
 * spi_alloc_master - allocate SPI master controller
 * @dev: the controller, possibly using the platform_bus
 * @size: how much zeroed driver-private data to allocate; the pointer to this
 *      memory is in the driver_data field of the returned device,
 *      accessible with spi_master_get_devdata().
 * Context: can sleep
 *
 * This call is used only by SPI master controller drivers, which are the
 * only ones directly touching chip registers.  It's how they allocate
 * an spi_master structure, prior to calling spi_register_master().
 *
 * This must be called from context that can sleep.  It returns the SPI
 * master structure on success, else NULL.
 *
 * The caller is responsible for assigning the bus number and initializing
 * the master's methods before calling spi_register_master(); and (after errors
 * adding the device) calling spi_master_put() and kfree() to prevent a memory
 * leak.
 */
struct spi_master *spi_alloc_master(struct device *dev, unsigned size)
{
        struct spi_master       *master;

        if (!dev)
                return NULL;

        master = kzalloc(size + sizeof(*master), GFP_KERNEL);
        if (!master)
                return NULL;

        device_initialize(&master->dev);
        master->bus_num = -1;
        master->num_chipselect = 1;
        master->dev.class = &spi_master_class;
        master->dev.parent = get_device(dev);
        spi_master_set_devdata(master, &master[1]);

        return master;
}
EXPORT_SYMBOL_GPL(spi_alloc_master);

#ifdef CONFIG_OF
static int of_spi_register_master(struct spi_master *master)
{
        int nb, i, *cs;
        struct device_node *np = master->dev.of_node;

        if (!np)
                return 0;

        nb = of_gpio_named_count(np, "cs-gpios");
        master->num_chipselect = max_t(int, nb, master->num_chipselect);

        /* Return error only for an incorrectly formed cs-gpios property */
        if (nb == 0 || nb == -ENOENT)
                return 0;
        else if (nb < 0)
                return nb;

        cs = devm_kzalloc(&master->dev,
                          sizeof(int) * master->num_chipselect,
                          GFP_KERNEL);
        master->cs_gpios = cs;

        if (!master->cs_gpios)
                return -ENOMEM;

        for (i = 0; i < master->num_chipselect; i++)
                cs[i] = -ENOENT;

        for (i = 0; i < nb; i++)
                cs[i] = of_get_named_gpio(np, "cs-gpios", i);

        return 0;
}
#else
static int of_spi_register_master(struct spi_master *master)
{
        return 0;
}
#endif

/**
 * spi_register_master - register SPI master controller
 * @master: initialized master, originally from spi_alloc_master()
 * Context: can sleep
 *
 * SPI master controllers connect to their drivers using some non-SPI bus,
 * such as the platform bus.  The final stage of probe() in that code
 * includes calling spi_register_master() to hook up to this SPI bus glue.
 *
 * SPI controllers use board specific (often SOC specific) bus numbers,
 * and board-specific addressing for SPI devices combines those numbers
 * with chip select numbers.  Since SPI does not directly support dynamic
 * device identification, boards need configuration tables telling which
 * chip is at which address.
 *
 * This must be called from context that can sleep.  It returns zero on
 * success, else a negative error code (dropping the master's refcount).
 * After a successful return, the caller is responsible for calling
 * spi_unregister_master().
 */
int spi_register_master(struct spi_master *master)
{
        static atomic_t         dyn_bus_id = ATOMIC_INIT((1<<15) - 1);
        struct device           *dev = master->dev.parent;
        struct boardinfo        *bi;
        int                     status = -ENODEV;
        int                     dynamic = 0;

        if (!dev)
                return -ENODEV;

        status = of_spi_register_master(master);
        if (status)
                return status;

        /* even if it's just one always-selected device, there must
         * be at least one chipselect
         */
        if (master->num_chipselect == 0)
                return -EINVAL;

        if ((master->bus_num < 0) && master->dev.of_node)
                master->bus_num = of_alias_get_id(master->dev.of_node, "spi");

        /* convention:  dynamically assigned bus IDs count down from the max */
        if (master->bus_num < 0) {
                /* FIXME switch to an IDR based scheme, something like
                 * I2C now uses, so we can't run out of "dynamic" IDs
                 */
                master->bus_num = atomic_dec_return(&dyn_bus_id);
                dynamic = 1;
        }

        spin_lock_init(&master->bus_lock_spinlock);
        mutex_init(&master->bus_lock_mutex);
        master->bus_lock_flag = 0;
        init_completion(&master->xfer_completion);
        if (!master->max_dma_len)
                master->max_dma_len = INT_MAX;

        /* register the device, then userspace will see it.
         * registration fails if the bus ID is in use.
         */
        dev_set_name(&master->dev, "spi%u", master->bus_num);
        status = device_add(&master->dev);
        if (status < 0)
                goto done;
        dev_dbg(dev, "registered master %s%s\n", dev_name(&master->dev),
                        dynamic ? " (dynamic)" : "");

        /* If we're using a queued driver, start the queue */
        if (master->transfer)
                dev_info(dev, "master is unqueued, this is deprecated\n");
        else {
                status = spi_master_initialize_queue(master);
                if (status) {
                        device_del(&master->dev);
                        goto done;
                }
        }

        mutex_lock(&board_lock);
        list_add_tail(&master->list, &spi_master_list);
        list_for_each_entry(bi, &board_list, list)
                spi_match_master_to_boardinfo(master, &bi->board_info);
        mutex_unlock(&board_lock);

        /* Register devices from the device tree and ACPI */
        of_register_spi_devices(master);
        acpi_register_spi_devices(master);
done:
        return status;
}
EXPORT_SYMBOL_GPL(spi_register_master);

static void devm_spi_unregister(struct device *dev, void *res)
{
        spi_unregister_master(*(struct spi_master **)res);
}

/**
 * dev_spi_register_master - register managed SPI master controller
 * @dev:    device managing SPI master
 * @master: initialized master, originally from spi_alloc_master()
 * Context: can sleep
 *
 * Register a SPI device as with spi_register_master() which will
 * automatically be unregister
 */
int devm_spi_register_master(struct device *dev, struct spi_master *master)
{
        struct spi_master **ptr;
        int ret;

        ptr = devres_alloc(devm_spi_unregister, sizeof(*ptr), GFP_KERNEL);
        if (!ptr)
                return -ENOMEM;

        ret = spi_register_master(master);
        if (!ret) {
                *ptr = master;
                devres_add(dev, ptr);
        } else {
                devres_free(ptr);
        }

        return ret;
}
EXPORT_SYMBOL_GPL(devm_spi_register_master);

static int __unregister(struct device *dev, void *null)
{
        spi_unregister_device(to_spi_device(dev));
        return 0;
}

/**
 * spi_unregister_master - unregister SPI master controller
 * @master: the master being unregistered
 * Context: can sleep
 *
 * This call is used only by SPI master controller drivers, which are the
 * only ones directly touching chip registers.
 *
 * This must be called from context that can sleep.
 */
void spi_unregister_master(struct spi_master *master)
{
        int dummy;

        if (master->queued) {
                if (spi_destroy_queue(master))
                        dev_err(&master->dev, "queue remove failed\n");
        }

        mutex_lock(&board_lock);
        list_del(&master->list);
        mutex_unlock(&board_lock);

        dummy = device_for_each_child(&master->dev, NULL, __unregister);
        device_unregister(&master->dev);
}
EXPORT_SYMBOL_GPL(spi_unregister_master);

int spi_master_suspend(struct spi_master *master)
{
        int ret;

        /* Basically no-ops for non-queued masters */
        if (!master->queued)
                return 0;

        ret = spi_stop_queue(master);
        if (ret)
                dev_err(&master->dev, "queue stop failed\n");

        return ret;
}
EXPORT_SYMBOL_GPL(spi_master_suspend);

int spi_master_resume(struct spi_master *master)
{
        int ret;

        if (!master->queued)
                return 0;

        ret = spi_start_queue(master);
        if (ret)
                dev_err(&master->dev, "queue restart failed\n");

        return ret;
}
EXPORT_SYMBOL_GPL(spi_master_resume);

static int __spi_master_match(struct device *dev, const void *data)
{
        struct spi_master *m;
        const u16 *bus_num = data;

        m = container_of(dev, struct spi_master, dev);
        return m->bus_num == *bus_num;
}

/**
 * spi_busnum_to_master - look up master associated with bus_num
 * @bus_num: the master's bus number
 * Context: can sleep
 *
 * This call may be used with devices that are registered after
 * arch init time.  It returns a refcounted pointer to the relevant
 * spi_master (which the caller must release), or NULL if there is
 * no such master registered.
 */
struct spi_master *spi_busnum_to_master(u16 bus_num)
{
        struct device           *dev;
        struct spi_master       *master = NULL;

        dev = class_find_device(&spi_master_class, NULL, &bus_num,
                                __spi_master_match);
        if (dev)
                master = container_of(dev, struct spi_master, dev);
        /* reference got in class_find_device */
        return master;
}
EXPORT_SYMBOL_GPL(spi_busnum_to_master);


/*-------------------------------------------------------------------------*/

/* Core methods for SPI master protocol drivers.  Some of the
 * other core methods are currently defined as inline functions.
 */

/**
 * spi_setup - setup SPI mode and clock rate
 * @spi: the device whose settings are being modified
 * Context: can sleep, and no requests are queued to the device
 *
 * SPI protocol drivers may need to update the transfer mode if the
 * device doesn't work with its default.  They may likewise need
 * to update clock rates or word sizes from initial values.  This function
 * changes those settings, and must be called from a context that can sleep.
 * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
 * effect the next time the device is selected and data is transferred to
 * or from it.  When this function returns, the spi device is deselected.
 *
 * Note that this call will fail if the protocol driver specifies an option
 * that the underlying controller or its driver does not support.  For
 * example, not all hardware supports wire transfers using nine bit words,
 * LSB-first wire encoding, or active-high chipselects.
 */
int spi_setup(struct spi_device *spi)
{
        unsigned        bad_bits;
        int             status = 0;

        /* check mode to prevent that DUAL and QUAD set at the same time
         */
        if (((spi->mode & SPI_TX_DUAL) && (spi->mode & SPI_TX_QUAD)) ||
                ((spi->mode & SPI_RX_DUAL) && (spi->mode & SPI_RX_QUAD))) {
                dev_err(&spi->dev,
                "setup: can not select dual and quad at the same time\n");
                return -EINVAL;
        }
        /* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden
         */
        if ((spi->mode & SPI_3WIRE) && (spi->mode &
                (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)))
                return -EINVAL;
        /* help drivers fail *cleanly* when they need options
         * that aren't supported with their current master
         */
        bad_bits = spi->mode & ~spi->master->mode_bits;
        if (bad_bits) {
                dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
                        bad_bits);
                return -EINVAL;
        }

        if (!spi->bits_per_word)
                spi->bits_per_word = 8;

        if (!spi->max_speed_hz)
                spi->max_speed_hz = spi->master->max_speed_hz;

        if (spi->master->setup)
                status = spi->master->setup(spi);

        dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n",
                        (int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
                        (spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
                        (spi->mode & SPI_LSB_FIRST) ? "lsb, " : "",
                        (spi->mode & SPI_3WIRE) ? "3wire, " : "",
                        (spi->mode & SPI_LOOP) ? "loopback, " : "",
                        spi->bits_per_word, spi->max_speed_hz,
                        status);

        return status;
}
EXPORT_SYMBOL_GPL(spi_setup);

static int __spi_validate(struct spi_device *spi, struct spi_message *message)
{
        struct spi_master *master = spi->master;
        struct spi_transfer *xfer;
        int w_size;

        if (list_empty(&message->transfers))
                return -EINVAL;

        /* Half-duplex links include original MicroWire, and ones with
         * only one data pin like SPI_3WIRE (switches direction) or where
         * either MOSI or MISO is missing.  They can also be caused by
         * software limitations.
         */
        if ((master->flags & SPI_MASTER_HALF_DUPLEX)
                        || (spi->mode & SPI_3WIRE)) {
                unsigned flags = master->flags;

                list_for_each_entry(xfer, &message->transfers, transfer_list) {
                        if (xfer->rx_buf && xfer->tx_buf)
                                return -EINVAL;
                        if ((flags & SPI_MASTER_NO_TX) && xfer->tx_buf)
                                return -EINVAL;
                        if ((flags & SPI_MASTER_NO_RX) && xfer->rx_buf)
                                return -EINVAL;
                }
        }

        /**
         * Set transfer bits_per_word and max speed as spi device default if
         * it is not set for this transfer.
         * Set transfer tx_nbits and rx_nbits as single transfer default
         * (SPI_NBITS_SINGLE) if it is not set for this transfer.
         */
        list_for_each_entry(xfer, &message->transfers, transfer_list) {
                message->frame_length += xfer->len;
                if (!xfer->bits_per_word)
                        xfer->bits_per_word = spi->bits_per_word;

                if (!xfer->speed_hz)
                        xfer->speed_hz = spi->max_speed_hz;

                if (master->max_speed_hz &&
                    xfer->speed_hz > master->max_speed_hz)
                        xfer->speed_hz = master->max_speed_hz;

                if (master->bits_per_word_mask) {
                        /* Only 32 bits fit in the mask */
                        if (xfer->bits_per_word > 32)
                                return -EINVAL;
                        if (!(master->bits_per_word_mask &
                                        BIT(xfer->bits_per_word - 1)))
                                return -EINVAL;
                }

                /*
                 * SPI transfer length should be multiple of SPI word size
                 * where SPI word size should be power-of-two multiple
                 */
                if (xfer->bits_per_word <= 8)
                        w_size = 1;
                else if (xfer->bits_per_word <= 16)
                        w_size = 2;
                else
                        w_size = 4;

                /* No partial transfers accepted */
                if (xfer->len % w_size)
                        return -EINVAL;

                if (xfer->speed_hz && master->min_speed_hz &&
                    xfer->speed_hz < master->min_speed_hz)
                        return -EINVAL;

                if (xfer->tx_buf && !xfer->tx_nbits)
                        xfer->tx_nbits = SPI_NBITS_SINGLE;
                if (xfer->rx_buf && !xfer->rx_nbits)
                        xfer->rx_nbits = SPI_NBITS_SINGLE;
                /* check transfer tx/rx_nbits:
                 * 1. check the value matches one of single, dual and quad
                 * 2. check tx/rx_nbits match the mode in spi_device
                 */
                if (xfer->tx_buf) {
                        if (xfer->tx_nbits != SPI_NBITS_SINGLE &&
                                xfer->tx_nbits != SPI_NBITS_DUAL &&
                                xfer->tx_nbits != SPI_NBITS_QUAD)
                                return -EINVAL;
                        if ((xfer->tx_nbits == SPI_NBITS_DUAL) &&
                                !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
                                return -EINVAL;
                        if ((xfer->tx_nbits == SPI_NBITS_QUAD) &&
                                !(spi->mode & SPI_TX_QUAD))
                                return -EINVAL;
                }
                /* check transfer rx_nbits */
                if (xfer->rx_buf) {
                        if (xfer->rx_nbits != SPI_NBITS_SINGLE &&
                                xfer->rx_nbits != SPI_NBITS_DUAL &&
                                xfer->rx_nbits != SPI_NBITS_QUAD)
                                return -EINVAL;
                        if ((xfer->rx_nbits == SPI_NBITS_DUAL) &&
                                !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
                                return -EINVAL;
                        if ((xfer->rx_nbits == SPI_NBITS_QUAD) &&
                                !(spi->mode & SPI_RX_QUAD))
                                return -EINVAL;
                }
        }

        message->status = -EINPROGRESS;

        return 0;
}

static int __spi_async(struct spi_device *spi, struct spi_message *message)
{
        struct spi_master *master = spi->master;

        message->spi = spi;

        trace_spi_message_submit(message);

        return master->transfer(spi, message);
}

/**
 * spi_async - asynchronous SPI transfer
 * @spi: device with which data will be exchanged
 * @message: describes the data transfers, including completion callback
 * Context: any (irqs may be blocked, etc)
 *
 * This call may be used in_irq and other contexts which can't sleep,
 * as well as from task contexts which can sleep.
 *
 * The completion callback is invoked in a context which can't sleep.
 * Before that invocation, the value of message->status is undefined.
 * When the callback is issued, message->status holds either zero (to
 * indicate complete success) or a negative error code.  After that
 * callback returns, the driver which issued the transfer request may
 * deallocate the associated memory; it's no longer in use by any SPI
 * core or controller driver code.
 *
 * Note that although all messages to a spi_device are handled in
 * FIFO order, messages may go to different devices in other orders.
 * Some device might be higher priority, or have various "hard" access
 * time requirements, for example.
 *
 * On detection of any fault during the transfer, processing of
 * the entire message is aborted, and the device is deselected.
 * Until returning from the associated message completion callback,
 * no other spi_message queued to that device will be processed.
 * (This rule applies equally to all the synchronous transfer calls,
 * which are wrappers around this core asynchronous primitive.)
 */
int spi_async(struct spi_device *spi, struct spi_message *message)
{
        struct spi_master *master = spi->master;
        int ret;
        unsigned long flags;

        ret = __spi_validate(spi, message);
        if (ret != 0)
                return ret;

        spin_lock_irqsave(&master->bus_lock_spinlock, flags);

        if (master->bus_lock_flag)
                ret = -EBUSY;
        else
                ret = __spi_async(spi, message);

        spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);

        return ret;
}
EXPORT_SYMBOL_GPL(spi_async);

/**
 * spi_async_locked - version of spi_async with exclusive bus usage
 * @spi: device with which data will be exchanged
 * @message: describes the data transfers, including completion callback
 * Context: any (irqs may be blocked, etc)
 *
 * This call may be used in_irq and other contexts which can't sleep,
 * as well as from task contexts which can sleep.
 *
 * The completion callback is invoked in a context which can't sleep.
 * Before that invocation, the value of message->status is undefined.
 * When the callback is issued, message->status holds either zero (to
 * indicate complete success) or a negative error code.  After that
 * callback returns, the driver which issued the transfer request may
 * deallocate the associated memory; it's no longer in use by any SPI
 * core or controller driver code.
 *
 * Note that although all messages to a spi_device are handled in
 * FIFO order, messages may go to different devices in other orders.
 * Some device might be higher priority, or have various "hard" access
 * time requirements, for example.
 *
 * On detection of any fault during the transfer, processing of
 * the entire message is aborted, and the device is deselected.
 * Until returning from the associated message completion callback,
 * no other spi_message queued to that device will be processed.
 * (This rule applies equally to all the synchronous transfer calls,
 * which are wrappers around this core asynchronous primitive.)
 */
int spi_async_locked(struct spi_device *spi, struct spi_message *message)
{
        struct spi_master *master = spi->master;
        int ret;
        unsigned long flags;

        ret = __spi_validate(spi, message);
        if (ret != 0)
                return ret;

        spin_lock_irqsave(&master->bus_lock_spinlock, flags);

        ret = __spi_async(spi, message);

        spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);

        return ret;

}
EXPORT_SYMBOL_GPL(spi_async_locked);


/*-------------------------------------------------------------------------*/

/* Utility methods for SPI master protocol drivers, layered on
 * top of the core.  Some other utility methods are defined as
 * inline functions.
 */

static void spi_complete(void *arg)
{
        complete(arg);
}

static int __spi_sync(struct spi_device *spi, struct spi_message *message,
                      int bus_locked)
{
        DECLARE_COMPLETION_ONSTACK(done);
        int status;
        struct spi_master *master = spi->master;

        message->complete = spi_complete;
        message->context = &done;

        if (!bus_locked)
                mutex_lock(&master->bus_lock_mutex);

        status = spi_async_locked(spi, message);

        if (!bus_locked)
                mutex_unlock(&master->bus_lock_mutex);

        if (status == 0) {
                wait_for_completion(&done);
                status = message->status;
        }
        message->context = NULL;
        return status;
}

/**
 * spi_sync - blocking/synchronous SPI data transfers
 * @spi: device with which data will be exchanged
 * @message: describes the data transfers
 * Context: can sleep
 *
 * This call may only be used from a context that may sleep.  The sleep
 * is non-interruptible, and has no timeout.  Low-overhead controller
 * drivers may DMA directly into and out of the message buffers.
 *
 * Note that the SPI device's chip select is active during the message,
 * and then is normally disabled between messages.  Drivers for some
 * frequently-used devices may want to minimize costs of selecting a chip,
 * by leaving it selected in anticipation that the next message will go
 * to the same chip.  (That may increase power usage.)
 *
 * Also, the caller is guaranteeing that the memory associated with the
 * message will not be freed before this call returns.
 *
 * It returns zero on success, else a negative error code.
 */
int spi_sync(struct spi_device *spi, struct spi_message *message)
{
        return __spi_sync(spi, message, 0);
}
EXPORT_SYMBOL_GPL(spi_sync);

/**
 * spi_sync_locked - version of spi_sync with exclusive bus usage
 * @spi: device with which data will be exchanged
 * @message: describes the data transfers
 * Context: can sleep
 *
 * This call may only be used from a context that may sleep.  The sleep
 * is non-interruptible, and has no timeout.  Low-overhead controller
 * drivers may DMA directly into and out of the message buffers.
 *
 * This call should be used by drivers that require exclusive access to the
 * SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must
 * be released by a spi_bus_unlock call when the exclusive access is over.
 *
 * It returns zero on success, else a negative error code.
 */
int spi_sync_locked(struct spi_device *spi, struct spi_message *message)
{
        return __spi_sync(spi, message, 1);
}
EXPORT_SYMBOL_GPL(spi_sync_locked);

/**
 * spi_bus_lock - obtain a lock for exclusive SPI bus usage
 * @master: SPI bus master that should be locked for exclusive bus access
 * Context: can sleep
 *
 * This call may only be used from a context that may sleep.  The sleep
 * is non-interruptible, and has no timeout.
 *
 * This call should be used by drivers that require exclusive access to the
 * SPI bus. The SPI bus must be released by a spi_bus_unlock call when the
 * exclusive access is over. Data transfer must be done by spi_sync_locked
 * and spi_async_locked calls when the SPI bus lock is held.
 *
 * It returns zero on success, else a negative error code.
 */
int spi_bus_lock(struct spi_master *master)
{
        unsigned long flags;

        mutex_lock(&master->bus_lock_mutex);

        spin_lock_irqsave(&master->bus_lock_spinlock, flags);
        master->bus_lock_flag = 1;
        spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);

        /* mutex remains locked until spi_bus_unlock is called */

        return 0;
}
EXPORT_SYMBOL_GPL(spi_bus_lock);

/**
 * spi_bus_unlock - release the lock for exclusive SPI bus usage
 * @master: SPI bus master that was locked for exclusive bus access
 * Context: can sleep
 *
 * This call may only be used from a context that may sleep.  The sleep
 * is non-interruptible, and has no timeout.
 *
 * This call releases an SPI bus lock previously obtained by an spi_bus_lock
 * call.
 *
 * It returns zero on success, else a negative error code.
 */
int spi_bus_unlock(struct spi_master *master)
{
        master->bus_lock_flag = 0;

        mutex_unlock(&master->bus_lock_mutex);

        return 0;
}
EXPORT_SYMBOL_GPL(spi_bus_unlock);

/* portable code must never pass more than 32 bytes */
#define SPI_BUFSIZ      max(32, SMP_CACHE_BYTES)

static u8       *buf;

/**
 * spi_write_then_read - SPI synchronous write followed by read
 * @spi: device with which data will be exchanged
 * @txbuf: data to be written (need not be dma-safe)
 * @n_tx: size of txbuf, in bytes
 * @rxbuf: buffer into which data will be read (need not be dma-safe)
 * @n_rx: size of rxbuf, in bytes
 * Context: can sleep
 *
 * This performs a half duplex MicroWire style transaction with the
 * device, sending txbuf and then reading rxbuf.  The return value
 * is zero for success, else a negative errno status code.
 * This call may only be used from a context that may sleep.
 *
 * Parameters to this routine are always copied using a small buffer;
 * portable code should never use this for more than 32 bytes.
 * Performance-sensitive or bulk transfer code should instead use
 * spi_{async,sync}() calls with dma-safe buffers.
 */
int spi_write_then_read(struct spi_device *spi,
                const void *txbuf, unsigned n_tx,
                void *rxbuf, unsigned n_rx)
{
        static DEFINE_MUTEX(lock);

        int                     status;
        struct spi_message      message;
        struct spi_transfer     x[2];
        u8                      *local_buf;

        /* Use preallocated DMA-safe buffer if we can.  We can't avoid
         * copying here, (as a pure convenience thing), but we can
         * keep heap costs out of the hot path unless someone else is
         * using the pre-allocated buffer or the transfer is too large.
         */
        if ((n_tx + n_rx) > SPI_BUFSIZ || !mutex_trylock(&lock)) {
                local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx),
                                    GFP_KERNEL | GFP_DMA);
                if (!local_buf)
                        return -ENOMEM;
        } else {
                local_buf = buf;
        }

        spi_message_init(&message);
        memset(x, 0, sizeof(x));
        if (n_tx) {
                x[0].len = n_tx;
                spi_message_add_tail(&x[0], &message);
        }
        if (n_rx) {
                x[1].len = n_rx;
                spi_message_add_tail(&x[1], &message);
        }

        memcpy(local_buf, txbuf, n_tx);
        x[0].tx_buf = local_buf;
        x[1].rx_buf = local_buf + n_tx;

        /* do the i/o */
        status = spi_sync(spi, &message);
        if (status == 0)
                memcpy(rxbuf, x[1].rx_buf, n_rx);

        if (x[0].tx_buf == buf)
                mutex_unlock(&lock);
        else
                kfree(local_buf);

        return status;
}
EXPORT_SYMBOL_GPL(spi_write_then_read);

/*-------------------------------------------------------------------------*/

static int __init spi_init(void)
{
        int     status;

        buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL);
        if (!buf) {
                status = -ENOMEM;
                goto err0;
        }

        status = bus_register(&spi_bus_type);
        if (status < 0)
                goto err1;

        status = class_register(&spi_master_class);
        if (status < 0)
                goto err2;
        return 0;

err2:
        bus_unregister(&spi_bus_type);
err1:
        kfree(buf);
        buf = NULL;
err0:
        return status;
}

/* board_info is normally registered in arch_initcall(),
 * but even essential drivers wait till later
 *
 * REVISIT only boardinfo really needs static linking. the rest (device and
 * driver registration) _could_ be dynamically linked (modular) ... costs
 * include needing to have boardinfo data structures be much more public.
 */
postcore_initcall(spi_init);