arch/arm/mach-s3c2410/mach-anubis.c

   1 /* linux/arch/arm/mach-s3c2410/mach-anubis.c
   2  *
   3  * Copyright (c) 2003-2005 Simtec Electronics
   4  *      http://armlinux.simtec.co.uk/
   5  *      Ben Dooks <ben@simtec.co.uk>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10 */
  11
  12 #include <linux/kernel.h>
  13 #include <linux/types.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/list.h>
  16 #include <linux/timer.h>
  17 #include <linux/init.h>
  18 #include <linux/serial_core.h>
  19 #include <linux/platform_device.h>
  20
  21 #include <asm/mach/arch.h>
  22 #include <asm/mach/map.h>
  23 #include <asm/mach/irq.h>
  24
  25 #include <asm/arch/anubis-map.h>
  26 #include <asm/arch/anubis-irq.h>
  27 #include <asm/arch/anubis-cpld.h>
  28
  29 #include <asm/hardware.h>
  30 #include <asm/io.h>
  31 #include <asm/irq.h>
  32 #include <asm/mach-types.h>
  33
  34 #include <asm/arch/regs-serial.h>
  35 #include <asm/arch/regs-gpio.h>
  36 #include <asm/arch/regs-mem.h>
  37 #include <asm/arch/regs-lcd.h>
  38 #include <asm/arch/nand.h>
  39
  40 #include <linux/mtd/mtd.h>
  41 #include <linux/mtd/nand.h>
  42 #include <linux/mtd/nand_ecc.h>
  43 #include <linux/mtd/partitions.h>
  44
  45 #include "clock.h"
  46 #include "devs.h"
  47 #include "cpu.h"
  48
  49 #define COPYRIGHT ", (c) 2005 Simtec Electronics"
  50
  51 static struct map_desc anubis_iodesc[] __initdata = {
  52   /* ISA IO areas */
  53
  54   {
  55         .virtual        = (u32)S3C24XX_VA_ISA_BYTE,
  56         .pfn            = __phys_to_pfn(0x0),
  57         .length         = SZ_4M,
  58         .type           = MT_DEVICE,
  59   }, {
  60         .virtual        = (u32)S3C24XX_VA_ISA_WORD,
  61         .pfn            = __phys_to_pfn(0x0),
  62         .length         = SZ_4M,
  63         .type           = MT_DEVICE,
  64   },
  65
  66   /* we could possibly compress the next set down into a set of smaller tables
  67    * pagetables, but that would mean using an L2 section, and it still means
  68    * we cannot actually feed the same register to an LDR due to 16K spacing
  69    */
  70
  71   /* CPLD control registers */
  72
  73   {
  74         .virtual        = (u32)ANUBIS_VA_CTRL1,
  75         .pfn            = __phys_to_pfn(ANUBIS_PA_CTRL1),
  76         .length         = SZ_4K,
  77         .type           = MT_DEVICE,
  78   }, {
  79         .virtual        = (u32)ANUBIS_VA_CTRL2,
  80         .pfn            = __phys_to_pfn(ANUBIS_PA_CTRL2),
  81         .length         = SZ_4K,
  82         .type           = MT_DEVICE,
  83   },
  84 };
  85
  86 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
  87 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
  88 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
  89
  90 static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
  91         [0] = {
  92                 .name           = "uclk",
  93                 .divisor        = 1,
  94                 .min_baud       = 0,
  95                 .max_baud       = 0,
  96         },
  97         [1] = {
  98                 .name           = "pclk",
  99                 .divisor        = 1,
 100                 .min_baud       = 0,
 101                 .max_baud       = 0,
 102         }
 103 };
 104
 105
 106 static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
 107         [0] = {
 108                 .hwport      = 0,
 109                 .flags       = 0,
 110                 .ucon        = UCON,
 111                 .ulcon       = ULCON,
 112                 .ufcon       = UFCON,
 113                 .clocks      = anubis_serial_clocks,
 114                 .clocks_size = ARRAY_SIZE(anubis_serial_clocks),
 115         },
 116         [1] = {
 117                 .hwport      = 2,
 118                 .flags       = 0,
 119                 .ucon        = UCON,
 120                 .ulcon       = ULCON,
 121                 .ufcon       = UFCON,
 122                 .clocks      = anubis_serial_clocks,
 123                 .clocks_size = ARRAY_SIZE(anubis_serial_clocks),
 124         },
 125 };
 126
 127 /* NAND Flash on Anubis board */
 128
 129 static int external_map[]   = { 2 };
 130 static int chip0_map[]      = { 0 };
 131 static int chip1_map[]      = { 1 };
 132
 133 static struct mtd_partition anubis_default_nand_part[] = {
 134         [0] = {
 135                 .name   = "Boot Agent",
 136                 .size   = SZ_16K,
 137                 .offset = 0,
 138         },
 139         [1] = {
 140                 .name   = "/boot",
 141                 .size   = SZ_4M - SZ_16K,
 142                 .offset = SZ_16K,
 143         },
 144         [2] = {
 145                 .name   = "user1",
 146                 .offset = SZ_4M,
 147                 .size   = SZ_32M - SZ_4M,
 148         },
 149         [3] = {
 150                 .name   = "user2",
 151                 .offset = SZ_32M,
 152                 .size   = MTDPART_SIZ_FULL,
 153         }
 154 };
 155
 156 /* the Anubis has 3 selectable slots for nand-flash, the two
 157  * on-board chip areas, as well as the external slot.
 158  *
 159  * Note, there is no current hot-plug support for the External
 160  * socket.
 161 */
 162
 163 static struct s3c2410_nand_set anubis_nand_sets[] = {
 164         [1] = {
 165                 .name           = "External",
 166                 .nr_chips       = 1,
 167                 .nr_map         = external_map,
 168                 .nr_partitions  = ARRAY_SIZE(anubis_default_nand_part),
 169                 .partitions     = anubis_default_nand_part,
 170         },
 171         [0] = {
 172                 .name           = "chip0",
 173                 .nr_chips       = 1,
 174                 .nr_map         = chip0_map,
 175                 .nr_partitions  = ARRAY_SIZE(anubis_default_nand_part),
 176                 .partitions     = anubis_default_nand_part,
 177         },
 178         [2] = {
 179                 .name           = "chip1",
 180                 .nr_chips       = 1,
 181                 .nr_map         = chip1_map,
 182                 .nr_partitions  = ARRAY_SIZE(anubis_default_nand_part),
 183                 .partitions     = anubis_default_nand_part,
 184         },
 185 };
 186
 187 static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
 188 {
 189         unsigned int tmp;
 190
 191         slot = set->nr_map[slot] & 3;
 192
 193         pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
 194                  slot, set, set->nr_map);
 195
 196         tmp = __raw_readb(ANUBIS_VA_CTRL1);
 197         tmp &= ~ANUBIS_CTRL1_NANDSEL;
 198         tmp |= slot;
 199
 200         pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
 201
 202         __raw_writeb(tmp, ANUBIS_VA_CTRL1);
 203 }
 204
 205 static struct s3c2410_platform_nand anubis_nand_info = {
 206         .tacls          = 25,
 207         .twrph0         = 55,
 208         .twrph1         = 40,
 209         .nr_sets        = ARRAY_SIZE(anubis_nand_sets),
 210         .sets           = anubis_nand_sets,
 211         .select_chip    = anubis_nand_select,
 212 };
 213
 214 /* IDE channels */
 215
 216 static struct resource anubis_ide0_resource[] = {
 217         {
 218                 .start  = S3C2410_CS3,
 219                 .end    = S3C2410_CS3 + (8*32) - 1,
 220                 .flags  = IORESOURCE_MEM,
 221         }, {
 222                 .start  = S3C2410_CS3 + (1<<26),
 223                 .end    = S3C2410_CS3 + (1<<26) + (8*32) - 1,
 224                 .flags  = IORESOURCE_MEM,
 225         }, {
 226                 .start  = IRQ_IDE0,
 227                 .end    = IRQ_IDE0,
 228                 .flags  = IORESOURCE_IRQ,
 229         },
 230 };
 231
 232 static struct platform_device anubis_device_ide0 = {
 233         .name           = "simtec-ide",
 234         .id             = 0,
 235         .num_resources  = ARRAY_SIZE(anubis_ide0_resource),
 236         .resource       = anubis_ide0_resource,
 237 };
 238
 239 static struct resource anubis_ide1_resource[] = {
 240         {
 241                 .start  = S3C2410_CS4,
 242                 .end    = S3C2410_CS4 + (8*32) - 1,
 243                 .flags  = IORESOURCE_MEM,
 244         }, {
 245                 .start  = S3C2410_CS4 + (1<<26),
 246                 .end    = S3C2410_CS4 + (1<<26) + (8*32) - 1,
 247                 .flags  = IORESOURCE_MEM,
 248         }, {
 249                 .start  = IRQ_IDE0,
 250                 .end    = IRQ_IDE0,
 251                 .flags  = IORESOURCE_IRQ,
 252         },
 253 };
 254
 255
 256 static struct platform_device anubis_device_ide1 = {
 257         .name           = "simtec-ide",
 258         .id             = 1,
 259         .num_resources  = ARRAY_SIZE(anubis_ide1_resource),
 260         .resource       = anubis_ide1_resource,
 261 };
 262
 263 /* Standard Anubis devices */
 264
 265 static struct platform_device *anubis_devices[] __initdata = {
 266         &s3c_device_usb,
 267         &s3c_device_wdt,
 268         &s3c_device_adc,
 269         &s3c_device_i2c,
 270         &s3c_device_rtc,
 271         &s3c_device_nand,
 272         &anubis_device_ide0,
 273         &anubis_device_ide1,
 274 };
 275
 276 static struct clk *anubis_clocks[] = {
 277         &s3c24xx_dclk0,
 278         &s3c24xx_dclk1,
 279         &s3c24xx_clkout0,
 280         &s3c24xx_clkout1,
 281         &s3c24xx_uclk,
 282 };
 283
 284 static struct s3c24xx_board anubis_board __initdata = {
 285         .devices       = anubis_devices,
 286         .devices_count = ARRAY_SIZE(anubis_devices),
 287         .clocks        = anubis_clocks,
 288         .clocks_count  = ARRAY_SIZE(anubis_clocks),
 289 };
 290
 291 static void __init anubis_map_io(void)
 292 {
 293         /* initialise the clocks */
 294
 295         s3c24xx_dclk0.parent = NULL;
 296         s3c24xx_dclk0.rate   = 12*1000*1000;
 297
 298         s3c24xx_dclk1.parent = NULL;
 299         s3c24xx_dclk1.rate   = 24*1000*1000;
 300
 301         s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
 302         s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
 303
 304         s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 305
 306         s3c_device_nand.dev.platform_data = &anubis_nand_info;
 307
 308         s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
 309         s3c24xx_init_clocks(0);
 310         s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
 311         s3c24xx_set_board(&anubis_board);
 312
 313         /* ensure that the GPIO is setup */
 314         s3c2410_gpio_setpin(S3C2410_GPA0, 1);
 315 }
 316
 317 MACHINE_START(ANUBIS, "Simtec-Anubis")
 318         /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 319         .phys_io        = S3C2410_PA_UART,
 320         .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 321         .boot_params    = S3C2410_SDRAM_PA + 0x100,
 322         .map_io         = anubis_map_io,
 323         .init_irq       = s3c24xx_init_irq,
 324         .timer          = &s3c24xx_timer,
 325 MACHINE_END