?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ARM: integrator: Retire LM and IM-PD1 boardfile code
[linux/fpc-iii.git] / drivers / net / bonding / bond_3ad.c
blob31e43a2197a30367b1290514ffc1e027fb8b45a8
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
4 */
5
6 #include <linux/skbuff.h>
7 #include <linux/if_ether.h>
8 #include <linux/netdevice.h>
9 #include <linux/spinlock.h>
10 #include <linux/ethtool.h>
11 #include <linux/etherdevice.h>
12 #include <linux/if_bonding.h>
13 #include <linux/pkt_sched.h>
14 #include <net/net_namespace.h>
15 #include <net/bonding.h>
16 #include <net/bond_3ad.h>
17 #include <net/netlink.h>
18
19 /* General definitions */
20 #define AD_SHORT_TIMEOUT 1
21 #define AD_LONG_TIMEOUT 0
22 #define AD_STANDBY 0x2
23 #define AD_MAX_TX_IN_SECOND 3
24 #define AD_COLLECTOR_MAX_DELAY 0
25
26 /* Timer definitions (43.4.4 in the 802.3ad standard) */
27 #define AD_FAST_PERIODIC_TIME 1
28 #define AD_SLOW_PERIODIC_TIME 30
29 #define AD_SHORT_TIMEOUT_TIME (3*AD_FAST_PERIODIC_TIME)
30 #define AD_LONG_TIMEOUT_TIME (3*AD_SLOW_PERIODIC_TIME)
31 #define AD_CHURN_DETECTION_TIME 60
32 #define AD_AGGREGATE_WAIT_TIME 2
33
34 /* Port Variables definitions used by the State Machines (43.4.7 in the
35 * 802.3ad standard)
36 */
37 #define AD_PORT_BEGIN 0x1
38 #define AD_PORT_LACP_ENABLED 0x2
39 #define AD_PORT_ACTOR_CHURN 0x4
40 #define AD_PORT_PARTNER_CHURN 0x8
41 #define AD_PORT_READY 0x10
42 #define AD_PORT_READY_N 0x20
43 #define AD_PORT_MATCHED 0x40
44 #define AD_PORT_STANDBY 0x80
45 #define AD_PORT_SELECTED 0x100
46 #define AD_PORT_MOVED 0x200
47 #define AD_PORT_CHURNED (AD_PORT_ACTOR_CHURN | AD_PORT_PARTNER_CHURN)
48
49 /* Port Key definitions
50 * key is determined according to the link speed, duplex and
51 * user key (which is yet not supported)
52 * --------------------------------------------------------------
53 * Port key | User key (10 bits) | Speed (5 bits) | Duplex|
54 * --------------------------------------------------------------
55 * |15 6|5 1|0
56 */
57 #define AD_DUPLEX_KEY_MASKS 0x1
58 #define AD_SPEED_KEY_MASKS 0x3E
59 #define AD_USER_KEY_MASKS 0xFFC0
60
61 enum ad_link_speed_type {
62 AD_LINK_SPEED_1MBPS = 1,
63 AD_LINK_SPEED_10MBPS,
64 AD_LINK_SPEED_100MBPS,
65 AD_LINK_SPEED_1000MBPS,
66 AD_LINK_SPEED_2500MBPS,
67 AD_LINK_SPEED_5000MBPS,
68 AD_LINK_SPEED_10000MBPS,
69 AD_LINK_SPEED_14000MBPS,
70 AD_LINK_SPEED_20000MBPS,
71 AD_LINK_SPEED_25000MBPS,
72 AD_LINK_SPEED_40000MBPS,
73 AD_LINK_SPEED_50000MBPS,
74 AD_LINK_SPEED_56000MBPS,
75 AD_LINK_SPEED_100000MBPS,
76 };
77
78 /* compare MAC addresses */
79 #define MAC_ADDRESS_EQUAL(A, B) \
80 ether_addr_equal_64bits((const u8 *)A, (const u8 *)B)
81
82 static const u8 null_mac_addr[ETH_ALEN + 2] __long_aligned = {
83 0, 0, 0, 0, 0, 0
84 };
85 static u16 ad_ticks_per_sec;
86 static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000;
87
88 static const u8 lacpdu_mcast_addr[ETH_ALEN + 2] __long_aligned =
89 MULTICAST_LACPDU_ADDR;
90
91 /* ================= main 802.3ad protocol functions ================== */
92 static int ad_lacpdu_send(struct port *port);
93 static int ad_marker_send(struct port *port, struct bond_marker *marker);
94 static void ad_mux_machine(struct port *port, bool *update_slave_arr);
95 static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port);
96 static void ad_tx_machine(struct port *port);
97 static void ad_periodic_machine(struct port *port);
98 static void ad_port_selection_logic(struct port *port, bool *update_slave_arr);
99 static void ad_agg_selection_logic(struct aggregator *aggregator,
100 bool *update_slave_arr);
101 static void ad_clear_agg(struct aggregator *aggregator);
102 static void ad_initialize_agg(struct aggregator *aggregator);
103 static void ad_initialize_port(struct port *port, int lacp_fast);
104 static void ad_enable_collecting_distributing(struct port *port,
105 bool *update_slave_arr);
106 static void ad_disable_collecting_distributing(struct port *port,
107 bool *update_slave_arr);
108 static void ad_marker_info_received(struct bond_marker *marker_info,
109 struct port *port);
110 static void ad_marker_response_received(struct bond_marker *marker,
111 struct port *port);
112 static void ad_update_actor_keys(struct port *port, bool reset);
113
114
115 /* ================= api to bonding and kernel code ================== */
116
117 /**
118 * __get_bond_by_port - get the port's bonding struct
119 * @port: the port we're looking at
120 *
121 * Return @port's bonding struct, or %NULL if it can't be found.
122 */
123 static inline struct bonding *__get_bond_by_port(struct port *port)
124 {
125 if (port->slave == NULL)
126 return NULL;
127
128 return bond_get_bond_by_slave(port->slave);
129 }
130
131 /**
132 * __get_first_agg - get the first aggregator in the bond
133 * @bond: the bond we're looking at
134 *
135 * Return the aggregator of the first slave in @bond, or %NULL if it can't be
136 * found.
137 * The caller must hold RCU or RTNL lock.
138 */
139 static inline struct aggregator *__get_first_agg(struct port *port)
140 {
141 struct bonding *bond = __get_bond_by_port(port);
142 struct slave *first_slave;
143 struct aggregator *agg;
144
145 /* If there's no bond for this port, or bond has no slaves */
146 if (bond == NULL)
147 return NULL;
148
149 rcu_read_lock();
150 first_slave = bond_first_slave_rcu(bond);
151 agg = first_slave ? &(SLAVE_AD_INFO(first_slave)->aggregator) : NULL;
152 rcu_read_unlock();
153
154 return agg;
155 }
156
157 /**
158 * __agg_has_partner - see if we have a partner
159 * @agg: the agregator we're looking at
160 *
161 * Return nonzero if aggregator has a partner (denoted by a non-zero ether
162 * address for the partner). Return 0 if not.
163 */
164 static inline int __agg_has_partner(struct aggregator *agg)
165 {
166 return !is_zero_ether_addr(agg->partner_system.mac_addr_value);
167 }
168
169 /**
170 * __disable_port - disable the port's slave
171 * @port: the port we're looking at
172 */
173 static inline void __disable_port(struct port *port)
174 {
175 bond_set_slave_inactive_flags(port->slave, BOND_SLAVE_NOTIFY_LATER);
176 }
177
178 /**
179 * __enable_port - enable the port's slave, if it's up
180 * @port: the port we're looking at
181 */
182 static inline void __enable_port(struct port *port)
183 {
184 struct slave *slave = port->slave;
185
186 if ((slave->link == BOND_LINK_UP) && bond_slave_is_up(slave))
187 bond_set_slave_active_flags(slave, BOND_SLAVE_NOTIFY_LATER);
188 }
189
190 /**
191 * __port_is_enabled - check if the port's slave is in active state
192 * @port: the port we're looking at
193 */
194 static inline int __port_is_enabled(struct port *port)
195 {
196 return bond_is_active_slave(port->slave);
197 }
198
199 /**
200 * __get_agg_selection_mode - get the aggregator selection mode
201 * @port: the port we're looking at
202 *
203 * Get the aggregator selection mode. Can be %STABLE, %BANDWIDTH or %COUNT.
204 */
205 static inline u32 __get_agg_selection_mode(struct port *port)
206 {
207 struct bonding *bond = __get_bond_by_port(port);
208
209 if (bond == NULL)
210 return BOND_AD_STABLE;
211
212 return bond->params.ad_select;
213 }
214
215 /**
216 * __check_agg_selection_timer - check if the selection timer has expired
217 * @port: the port we're looking at
218 */
219 static inline int __check_agg_selection_timer(struct port *port)
220 {
221 struct bonding *bond = __get_bond_by_port(port);
222
223 if (bond == NULL)
224 return 0;
225
226 return BOND_AD_INFO(bond).agg_select_timer ? 1 : 0;
227 }
228
229 /**
230 * __get_link_speed - get a port's speed
231 * @port: the port we're looking at
232 *
233 * Return @port's speed in 802.3ad enum format. i.e. one of:
234 * 0,
235 * %AD_LINK_SPEED_10MBPS,
236 * %AD_LINK_SPEED_100MBPS,
237 * %AD_LINK_SPEED_1000MBPS,
238 * %AD_LINK_SPEED_2500MBPS,
239 * %AD_LINK_SPEED_5000MBPS,
240 * %AD_LINK_SPEED_10000MBPS
241 * %AD_LINK_SPEED_14000MBPS,
242 * %AD_LINK_SPEED_20000MBPS
243 * %AD_LINK_SPEED_25000MBPS
244 * %AD_LINK_SPEED_40000MBPS
245 * %AD_LINK_SPEED_50000MBPS
246 * %AD_LINK_SPEED_56000MBPS
247 * %AD_LINK_SPEED_100000MBPS
248 */
249 static u16 __get_link_speed(struct port *port)
250 {
251 struct slave *slave = port->slave;
252 u16 speed;
253
254 /* this if covers only a special case: when the configuration starts
255 * with link down, it sets the speed to 0.
256 * This is done in spite of the fact that the e100 driver reports 0
257 * to be compatible with MVT in the future.
258 */
259 if (slave->link != BOND_LINK_UP)
260 speed = 0;
261 else {
262 switch (slave->speed) {
263 case SPEED_10:
264 speed = AD_LINK_SPEED_10MBPS;
265 break;
266
267 case SPEED_100:
268 speed = AD_LINK_SPEED_100MBPS;
269 break;
270
271 case SPEED_1000:
272 speed = AD_LINK_SPEED_1000MBPS;
273 break;
274
275 case SPEED_2500:
276 speed = AD_LINK_SPEED_2500MBPS;
277 break;
278
279 case SPEED_5000:
280 speed = AD_LINK_SPEED_5000MBPS;
281 break;
282
283 case SPEED_10000:
284 speed = AD_LINK_SPEED_10000MBPS;
285 break;
286
287 case SPEED_14000:
288 speed = AD_LINK_SPEED_14000MBPS;
289 break;
290
291 case SPEED_20000:
292 speed = AD_LINK_SPEED_20000MBPS;
293 break;
294
295 case SPEED_25000:
296 speed = AD_LINK_SPEED_25000MBPS;
297 break;
298
299 case SPEED_40000:
300 speed = AD_LINK_SPEED_40000MBPS;
301 break;
302
303 case SPEED_50000:
304 speed = AD_LINK_SPEED_50000MBPS;
305 break;
306
307 case SPEED_56000:
308 speed = AD_LINK_SPEED_56000MBPS;
309 break;
310
311 case SPEED_100000:
312 speed = AD_LINK_SPEED_100000MBPS;
313 break;
314
315 default:
316 /* unknown speed value from ethtool. shouldn't happen */
317 if (slave->speed != SPEED_UNKNOWN)
318 pr_warn_once("%s: (slave %s): unknown ethtool speed (%d) for port %d (set it to 0)\n",
319 slave->bond->dev->name,
320 slave->dev->name, slave->speed,
321 port->actor_port_number);
322 speed = 0;
323 break;
324 }
325 }
326
327 slave_dbg(slave->bond->dev, slave->dev, "Port %d Received link speed %d update from adapter\n",
328 port->actor_port_number, speed);
329 return speed;
330 }
331
332 /**
333 * __get_duplex - get a port's duplex
334 * @port: the port we're looking at
335 *
336 * Return @port's duplex in 802.3ad bitmask format. i.e.:
337 * 0x01 if in full duplex
338 * 0x00 otherwise
339 */
340 static u8 __get_duplex(struct port *port)
341 {
342 struct slave *slave = port->slave;
343 u8 retval = 0x0;
344
345 /* handling a special case: when the configuration starts with
346 * link down, it sets the duplex to 0.
347 */
348 if (slave->link == BOND_LINK_UP) {
349 switch (slave->duplex) {
350 case DUPLEX_FULL:
351 retval = 0x1;
352 slave_dbg(slave->bond->dev, slave->dev, "Port %d Received status full duplex update from adapter\n",
353 port->actor_port_number);
354 break;
355 case DUPLEX_HALF:
356 default:
357 retval = 0x0;
358 slave_dbg(slave->bond->dev, slave->dev, "Port %d Received status NOT full duplex update from adapter\n",
359 port->actor_port_number);
360 break;
361 }
362 }
363 return retval;
364 }
365
366 static void __ad_actor_update_port(struct port *port)
367 {
368 const struct bonding *bond = bond_get_bond_by_slave(port->slave);
369
370 port->actor_system = BOND_AD_INFO(bond).system.sys_mac_addr;
371 port->actor_system_priority = BOND_AD_INFO(bond).system.sys_priority;
372 }
373
374 /* Conversions */
375
376 /**
377 * __ad_timer_to_ticks - convert a given timer type to AD module ticks
378 * @timer_type: which timer to operate
379 * @par: timer parameter. see below
380 *
381 * If @timer_type is %current_while_timer, @par indicates long/short timer.
382 * If @timer_type is %periodic_timer, @par is one of %FAST_PERIODIC_TIME,
383 * %SLOW_PERIODIC_TIME.
384 */
385 static u16 __ad_timer_to_ticks(u16 timer_type, u16 par)
386 {
387 u16 retval = 0; /* to silence the compiler */
388
389 switch (timer_type) {
390 case AD_CURRENT_WHILE_TIMER: /* for rx machine usage */
391 if (par)
392 retval = (AD_SHORT_TIMEOUT_TIME*ad_ticks_per_sec);
393 else
394 retval = (AD_LONG_TIMEOUT_TIME*ad_ticks_per_sec);
395 break;
396 case AD_ACTOR_CHURN_TIMER: /* for local churn machine */
397 retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec);
398 break;
399 case AD_PERIODIC_TIMER: /* for periodic machine */
400 retval = (par*ad_ticks_per_sec); /* long timeout */
401 break;
402 case AD_PARTNER_CHURN_TIMER: /* for remote churn machine */
403 retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec);
404 break;
405 case AD_WAIT_WHILE_TIMER: /* for selection machine */
406 retval = (AD_AGGREGATE_WAIT_TIME*ad_ticks_per_sec);
407 break;
408 }
409
410 return retval;
411 }
412
413
414 /* ================= ad_rx_machine helper functions ================== */
415
416 /**
417 * __choose_matched - update a port's matched variable from a received lacpdu
418 * @lacpdu: the lacpdu we've received
419 * @port: the port we're looking at
420 *
421 * Update the value of the matched variable, using parameter values from a
422 * newly received lacpdu. Parameter values for the partner carried in the
423 * received PDU are compared with the corresponding operational parameter
424 * values for the actor. Matched is set to TRUE if all of these parameters
425 * match and the PDU parameter partner_state.aggregation has the same value as
426 * actor_oper_port_state.aggregation and lacp will actively maintain the link
427 * in the aggregation. Matched is also set to TRUE if the value of
428 * actor_state.aggregation in the received PDU is set to FALSE, i.e., indicates
429 * an individual link and lacp will actively maintain the link. Otherwise,
430 * matched is set to FALSE. LACP is considered to be actively maintaining the
431 * link if either the PDU's actor_state.lacp_activity variable is TRUE or both
432 * the actor's actor_oper_port_state.lacp_activity and the PDU's
433 * partner_state.lacp_activity variables are TRUE.
434 *
435 * Note: the AD_PORT_MATCHED "variable" is not specified by 802.3ad; it is
436 * used here to implement the language from 802.3ad 43.4.9 that requires
437 * recordPDU to "match" the LACPDU parameters to the stored values.
438 */
439 static void __choose_matched(struct lacpdu *lacpdu, struct port *port)
440 {
441 /* check if all parameters are alike
442 * or this is individual link(aggregation == FALSE)
443 * then update the state machine Matched variable.
444 */
445 if (((ntohs(lacpdu->partner_port) == port->actor_port_number) &&
446 (ntohs(lacpdu->partner_port_priority) == port->actor_port_priority) &&
447 MAC_ADDRESS_EQUAL(&(lacpdu->partner_system), &(port->actor_system)) &&
448 (ntohs(lacpdu->partner_system_priority) == port->actor_system_priority) &&
449 (ntohs(lacpdu->partner_key) == port->actor_oper_port_key) &&
450 ((lacpdu->partner_state & LACP_STATE_AGGREGATION) == (port->actor_oper_port_state & LACP_STATE_AGGREGATION))) ||
451 ((lacpdu->actor_state & LACP_STATE_AGGREGATION) == 0)
452 ) {
453 port->sm_vars |= AD_PORT_MATCHED;
454 } else {
455 port->sm_vars &= ~AD_PORT_MATCHED;
456 }
457 }
458
459 /**
460 * __record_pdu - record parameters from a received lacpdu
461 * @lacpdu: the lacpdu we've received
462 * @port: the port we're looking at
463 *
464 * Record the parameter values for the Actor carried in a received lacpdu as
465 * the current partner operational parameter values and sets
466 * actor_oper_port_state.defaulted to FALSE.
467 */
468 static void __record_pdu(struct lacpdu *lacpdu, struct port *port)
469 {
470 if (lacpdu && port) {
471 struct port_params *partner = &port->partner_oper;
472
473 __choose_matched(lacpdu, port);
474 /* record the new parameter values for the partner
475 * operational
476 */
477 partner->port_number = ntohs(lacpdu->actor_port);
478 partner->port_priority = ntohs(lacpdu->actor_port_priority);
479 partner->system = lacpdu->actor_system;
480 partner->system_priority = ntohs(lacpdu->actor_system_priority);
481 partner->key = ntohs(lacpdu->actor_key);
482 partner->port_state = lacpdu->actor_state;
483
484 /* set actor_oper_port_state.defaulted to FALSE */
485 port->actor_oper_port_state &= ~LACP_STATE_DEFAULTED;
486
487 /* set the partner sync. to on if the partner is sync,
488 * and the port is matched
489 */
490 if ((port->sm_vars & AD_PORT_MATCHED) &&
491 (lacpdu->actor_state & LACP_STATE_SYNCHRONIZATION)) {
492 partner->port_state |= LACP_STATE_SYNCHRONIZATION;
493 slave_dbg(port->slave->bond->dev, port->slave->dev,
494 "partner sync=1\n");
495 } else {
496 partner->port_state &= ~LACP_STATE_SYNCHRONIZATION;
497 slave_dbg(port->slave->bond->dev, port->slave->dev,
498 "partner sync=0\n");
499 }
500 }
501 }
502
503 /**
504 * __record_default - record default parameters
505 * @port: the port we're looking at
506 *
507 * This function records the default parameter values for the partner carried
508 * in the Partner Admin parameters as the current partner operational parameter
509 * values and sets actor_oper_port_state.defaulted to TRUE.
510 */
511 static void __record_default(struct port *port)
512 {
513 if (port) {
514 /* record the partner admin parameters */
515 memcpy(&port->partner_oper, &port->partner_admin,
516 sizeof(struct port_params));
517
518 /* set actor_oper_port_state.defaulted to true */
519 port->actor_oper_port_state |= LACP_STATE_DEFAULTED;
520 }
521 }
522
523 /**
524 * __update_selected - update a port's Selected variable from a received lacpdu
525 * @lacpdu: the lacpdu we've received
526 * @port: the port we're looking at
527 *
528 * Update the value of the selected variable, using parameter values from a
529 * newly received lacpdu. The parameter values for the Actor carried in the
530 * received PDU are compared with the corresponding operational parameter
531 * values for the ports partner. If one or more of the comparisons shows that
532 * the value(s) received in the PDU differ from the current operational values,
533 * then selected is set to FALSE and actor_oper_port_state.synchronization is
534 * set to out_of_sync. Otherwise, selected remains unchanged.
535 */
536 static void __update_selected(struct lacpdu *lacpdu, struct port *port)
537 {
538 if (lacpdu && port) {
539 const struct port_params *partner = &port->partner_oper;
540
541 /* check if any parameter is different then
542 * update the state machine selected variable.
543 */
544 if (ntohs(lacpdu->actor_port) != partner->port_number ||
545 ntohs(lacpdu->actor_port_priority) != partner->port_priority ||
546 !MAC_ADDRESS_EQUAL(&lacpdu->actor_system, &partner->system) ||
547 ntohs(lacpdu->actor_system_priority) != partner->system_priority ||
548 ntohs(lacpdu->actor_key) != partner->key ||
549 (lacpdu->actor_state & LACP_STATE_AGGREGATION) != (partner->port_state & LACP_STATE_AGGREGATION)) {
550 port->sm_vars &= ~AD_PORT_SELECTED;
551 }
552 }
553 }
554
555 /**
556 * __update_default_selected - update a port's Selected variable from Partner
557 * @port: the port we're looking at
558 *
559 * This function updates the value of the selected variable, using the partner
560 * administrative parameter values. The administrative values are compared with
561 * the corresponding operational parameter values for the partner. If one or
562 * more of the comparisons shows that the administrative value(s) differ from
563 * the current operational values, then Selected is set to FALSE and
564 * actor_oper_port_state.synchronization is set to OUT_OF_SYNC. Otherwise,
565 * Selected remains unchanged.
566 */
567 static void __update_default_selected(struct port *port)
568 {
569 if (port) {
570 const struct port_params *admin = &port->partner_admin;
571 const struct port_params *oper = &port->partner_oper;
572
573 /* check if any parameter is different then
574 * update the state machine selected variable.
575 */
576 if (admin->port_number != oper->port_number ||
577 admin->port_priority != oper->port_priority ||
578 !MAC_ADDRESS_EQUAL(&admin->system, &oper->system) ||
579 admin->system_priority != oper->system_priority ||
580 admin->key != oper->key ||
581 (admin->port_state & LACP_STATE_AGGREGATION)
582 != (oper->port_state & LACP_STATE_AGGREGATION)) {
583 port->sm_vars &= ~AD_PORT_SELECTED;
584 }
585 }
586 }
587
588 /**
589 * __update_ntt - update a port's ntt variable from a received lacpdu
590 * @lacpdu: the lacpdu we've received
591 * @port: the port we're looking at
592 *
593 * Updates the value of the ntt variable, using parameter values from a newly
594 * received lacpdu. The parameter values for the partner carried in the
595 * received PDU are compared with the corresponding operational parameter
596 * values for the Actor. If one or more of the comparisons shows that the
597 * value(s) received in the PDU differ from the current operational values,
598 * then ntt is set to TRUE. Otherwise, ntt remains unchanged.
599 */
600 static void __update_ntt(struct lacpdu *lacpdu, struct port *port)
601 {
602 /* validate lacpdu and port */
603 if (lacpdu && port) {
604 /* check if any parameter is different then
605 * update the port->ntt.
606 */
607 if ((ntohs(lacpdu->partner_port) != port->actor_port_number) ||
608 (ntohs(lacpdu->partner_port_priority) != port->actor_port_priority) ||
609 !MAC_ADDRESS_EQUAL(&(lacpdu->partner_system), &(port->actor_system)) ||
610 (ntohs(lacpdu->partner_system_priority) != port->actor_system_priority) ||
611 (ntohs(lacpdu->partner_key) != port->actor_oper_port_key) ||
612 ((lacpdu->partner_state & LACP_STATE_LACP_ACTIVITY) != (port->actor_oper_port_state & LACP_STATE_LACP_ACTIVITY)) ||
613 ((lacpdu->partner_state & LACP_STATE_LACP_TIMEOUT) != (port->actor_oper_port_state & LACP_STATE_LACP_TIMEOUT)) ||
614 ((lacpdu->partner_state & LACP_STATE_SYNCHRONIZATION) != (port->actor_oper_port_state & LACP_STATE_SYNCHRONIZATION)) ||
615 ((lacpdu->partner_state & LACP_STATE_AGGREGATION) != (port->actor_oper_port_state & LACP_STATE_AGGREGATION))
616 ) {
617 port->ntt = true;
618 }
619 }
620 }
621
622 /**
623 * __agg_ports_are_ready - check if all ports in an aggregator are ready
624 * @aggregator: the aggregator we're looking at
625 *
626 */
627 static int __agg_ports_are_ready(struct aggregator *aggregator)
628 {
629 struct port *port;
630 int retval = 1;
631
632 if (aggregator) {
633 /* scan all ports in this aggregator to verfy if they are
634 * all ready.
635 */
636 for (port = aggregator->lag_ports;
637 port;
638 port = port->next_port_in_aggregator) {
639 if (!(port->sm_vars & AD_PORT_READY_N)) {
640 retval = 0;
641 break;
642 }
643 }
644 }
645
646 return retval;
647 }
648
649 /**
650 * __set_agg_ports_ready - set value of Ready bit in all ports of an aggregator
651 * @aggregator: the aggregator we're looking at
652 * @val: Should the ports' ready bit be set on or off
653 *
654 */
655 static void __set_agg_ports_ready(struct aggregator *aggregator, int val)
656 {
657 struct port *port;
658
659 for (port = aggregator->lag_ports; port;
660 port = port->next_port_in_aggregator) {
661 if (val)
662 port->sm_vars |= AD_PORT_READY;
663 else
664 port->sm_vars &= ~AD_PORT_READY;
665 }
666 }
667
668 static int __agg_active_ports(struct aggregator *agg)
669 {
670 struct port *port;
671 int active = 0;
672
673 for (port = agg->lag_ports; port;
674 port = port->next_port_in_aggregator) {
675 if (port->is_enabled)
676 active++;
677 }
678
679 return active;
680 }
681
682 /**
683 * __get_agg_bandwidth - get the total bandwidth of an aggregator
684 * @aggregator: the aggregator we're looking at
685 *
686 */
687 static u32 __get_agg_bandwidth(struct aggregator *aggregator)
688 {
689 int nports = __agg_active_ports(aggregator);
690 u32 bandwidth = 0;
691
692 if (nports) {
693 switch (__get_link_speed(aggregator->lag_ports)) {
694 case AD_LINK_SPEED_1MBPS:
695 bandwidth = nports;
696 break;
697 case AD_LINK_SPEED_10MBPS:
698 bandwidth = nports * 10;
699 break;
700 case AD_LINK_SPEED_100MBPS:
701 bandwidth = nports * 100;
702 break;
703 case AD_LINK_SPEED_1000MBPS:
704 bandwidth = nports * 1000;
705 break;
706 case AD_LINK_SPEED_2500MBPS:
707 bandwidth = nports * 2500;
708 break;
709 case AD_LINK_SPEED_5000MBPS:
710 bandwidth = nports * 5000;
711 break;
712 case AD_LINK_SPEED_10000MBPS:
713 bandwidth = nports * 10000;
714 break;
715 case AD_LINK_SPEED_14000MBPS:
716 bandwidth = nports * 14000;
717 break;
718 case AD_LINK_SPEED_20000MBPS:
719 bandwidth = nports * 20000;
720 break;
721 case AD_LINK_SPEED_25000MBPS:
722 bandwidth = nports * 25000;
723 break;
724 case AD_LINK_SPEED_40000MBPS:
725 bandwidth = nports * 40000;
726 break;
727 case AD_LINK_SPEED_50000MBPS:
728 bandwidth = nports * 50000;
729 break;
730 case AD_LINK_SPEED_56000MBPS:
731 bandwidth = nports * 56000;
732 break;
733 case AD_LINK_SPEED_100000MBPS:
734 bandwidth = nports * 100000;
735 break;
736 default:
737 bandwidth = 0; /* to silence the compiler */
738 }
739 }
740 return bandwidth;
741 }
742
743 /**
744 * __get_active_agg - get the current active aggregator
745 * @aggregator: the aggregator we're looking at
746 *
747 * Caller must hold RCU lock.
748 */
749 static struct aggregator *__get_active_agg(struct aggregator *aggregator)
750 {
751 struct bonding *bond = aggregator->slave->bond;
752 struct list_head *iter;
753 struct slave *slave;
754
755 bond_for_each_slave_rcu(bond, slave, iter)
756 if (SLAVE_AD_INFO(slave)->aggregator.is_active)
757 return &(SLAVE_AD_INFO(slave)->aggregator);
758
759 return NULL;
760 }
761
762 /**
763 * __update_lacpdu_from_port - update a port's lacpdu fields
764 * @port: the port we're looking at
765 */
766 static inline void __update_lacpdu_from_port(struct port *port)
767 {
768 struct lacpdu *lacpdu = &port->lacpdu;
769 const struct port_params *partner = &port->partner_oper;
770
771 /* update current actual Actor parameters
772 * lacpdu->subtype initialized
773 * lacpdu->version_number initialized
774 * lacpdu->tlv_type_actor_info initialized
775 * lacpdu->actor_information_length initialized
776 */
777
778 lacpdu->actor_system_priority = htons(port->actor_system_priority);
779 lacpdu->actor_system = port->actor_system;
780 lacpdu->actor_key = htons(port->actor_oper_port_key);
781 lacpdu->actor_port_priority = htons(port->actor_port_priority);
782 lacpdu->actor_port = htons(port->actor_port_number);
783 lacpdu->actor_state = port->actor_oper_port_state;
784 slave_dbg(port->slave->bond->dev, port->slave->dev,
785 "update lacpdu: actor port state %x\n",
786 port->actor_oper_port_state);
787
788 /* lacpdu->reserved_3_1 initialized
789 * lacpdu->tlv_type_partner_info initialized
790 * lacpdu->partner_information_length initialized
791 */
792
793 lacpdu->partner_system_priority = htons(partner->system_priority);
794 lacpdu->partner_system = partner->system;
795 lacpdu->partner_key = htons(partner->key);
796 lacpdu->partner_port_priority = htons(partner->port_priority);
797 lacpdu->partner_port = htons(partner->port_number);
798 lacpdu->partner_state = partner->port_state;
799
800 /* lacpdu->reserved_3_2 initialized
801 * lacpdu->tlv_type_collector_info initialized
802 * lacpdu->collector_information_length initialized
803 * collector_max_delay initialized
804 * reserved_12[12] initialized
805 * tlv_type_terminator initialized
806 * terminator_length initialized
807 * reserved_50[50] initialized
808 */
809 }
810
811 /* ================= main 802.3ad protocol code ========================= */
812
813 /**
814 * ad_lacpdu_send - send out a lacpdu packet on a given port
815 * @port: the port we're looking at
816 *
817 * Returns: 0 on success
818 * < 0 on error
819 */
820 static int ad_lacpdu_send(struct port *port)
821 {
822 struct slave *slave = port->slave;
823 struct sk_buff *skb;
824 struct lacpdu_header *lacpdu_header;
825 int length = sizeof(struct lacpdu_header);
826
827 skb = dev_alloc_skb(length);
828 if (!skb)
829 return -ENOMEM;
830
831 atomic64_inc(&SLAVE_AD_INFO(slave)->stats.lacpdu_tx);
832 atomic64_inc(&BOND_AD_INFO(slave->bond).stats.lacpdu_tx);
833
834 skb->dev = slave->dev;
835 skb_reset_mac_header(skb);
836 skb->network_header = skb->mac_header + ETH_HLEN;
837 skb->protocol = PKT_TYPE_LACPDU;
838 skb->priority = TC_PRIO_CONTROL;
839
840 lacpdu_header = skb_put(skb, length);
841
842 ether_addr_copy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr);
843 /* Note: source address is set to be the member's PERMANENT address,
844 * because we use it to identify loopback lacpdus in receive.
845 */
846 ether_addr_copy(lacpdu_header->hdr.h_source, slave->perm_hwaddr);
847 lacpdu_header->hdr.h_proto = PKT_TYPE_LACPDU;
848
849 lacpdu_header->lacpdu = port->lacpdu;
850
851 dev_queue_xmit(skb);
852
853 return 0;
854 }
855
856 /**
857 * ad_marker_send - send marker information/response on a given port
858 * @port: the port we're looking at
859 * @marker: marker data to send
860 *
861 * Returns: 0 on success
862 * < 0 on error
863 */
864 static int ad_marker_send(struct port *port, struct bond_marker *marker)
865 {
866 struct slave *slave = port->slave;
867 struct sk_buff *skb;
868 struct bond_marker_header *marker_header;
869 int length = sizeof(struct bond_marker_header);
870
871 skb = dev_alloc_skb(length + 16);
872 if (!skb)
873 return -ENOMEM;
874
875 switch (marker->tlv_type) {
876 case AD_MARKER_INFORMATION_SUBTYPE:
877 atomic64_inc(&SLAVE_AD_INFO(slave)->stats.marker_tx);
878 atomic64_inc(&BOND_AD_INFO(slave->bond).stats.marker_tx);
879 break;
880 case AD_MARKER_RESPONSE_SUBTYPE:
881 atomic64_inc(&SLAVE_AD_INFO(slave)->stats.marker_resp_tx);
882 atomic64_inc(&BOND_AD_INFO(slave->bond).stats.marker_resp_tx);
883 break;
884 }
885
886 skb_reserve(skb, 16);
887
888 skb->dev = slave->dev;
889 skb_reset_mac_header(skb);
890 skb->network_header = skb->mac_header + ETH_HLEN;
891 skb->protocol = PKT_TYPE_LACPDU;
892
893 marker_header = skb_put(skb, length);
894
895 ether_addr_copy(marker_header->hdr.h_dest, lacpdu_mcast_addr);
896 /* Note: source address is set to be the member's PERMANENT address,
897 * because we use it to identify loopback MARKERs in receive.
898 */
899 ether_addr_copy(marker_header->hdr.h_source, slave->perm_hwaddr);
900 marker_header->hdr.h_proto = PKT_TYPE_LACPDU;
901
902 marker_header->marker = *marker;
903
904 dev_queue_xmit(skb);
905
906 return 0;
907 }
908
909 /**
910 * ad_mux_machine - handle a port's mux state machine
911 * @port: the port we're looking at
912 * @update_slave_arr: Does slave array need update?
913 */
914 static void ad_mux_machine(struct port *port, bool *update_slave_arr)
915 {
916 mux_states_t last_state;
917
918 /* keep current State Machine state to compare later if it was
919 * changed
920 */
921 last_state = port->sm_mux_state;
922
923 if (port->sm_vars & AD_PORT_BEGIN) {
924 port->sm_mux_state = AD_MUX_DETACHED;
925 } else {
926 switch (port->sm_mux_state) {
927 case AD_MUX_DETACHED:
928 if ((port->sm_vars & AD_PORT_SELECTED)
929 || (port->sm_vars & AD_PORT_STANDBY))
930 /* if SELECTED or STANDBY */
931 port->sm_mux_state = AD_MUX_WAITING;
932 break;
933 case AD_MUX_WAITING:
934 /* if SELECTED == FALSE return to DETACH state */
935 if (!(port->sm_vars & AD_PORT_SELECTED)) {
936 port->sm_vars &= ~AD_PORT_READY_N;
937 /* in order to withhold the Selection Logic to
938 * check all ports READY_N value every callback
939 * cycle to update ready variable, we check
940 * READY_N and update READY here
941 */
942 __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
943 port->sm_mux_state = AD_MUX_DETACHED;
944 break;
945 }
946
947 /* check if the wait_while_timer expired */
948 if (port->sm_mux_timer_counter
949 && !(--port->sm_mux_timer_counter))
950 port->sm_vars |= AD_PORT_READY_N;
951
952 /* in order to withhold the selection logic to check
953 * all ports READY_N value every callback cycle to
954 * update ready variable, we check READY_N and update
955 * READY here
956 */
957 __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
958
959 /* if the wait_while_timer expired, and the port is
960 * in READY state, move to ATTACHED state
961 */
962 if ((port->sm_vars & AD_PORT_READY)
963 && !port->sm_mux_timer_counter)
964 port->sm_mux_state = AD_MUX_ATTACHED;
965 break;
966 case AD_MUX_ATTACHED:
967 /* check also if agg_select_timer expired (so the
968 * edable port will take place only after this timer)
969 */
970 if ((port->sm_vars & AD_PORT_SELECTED) &&
971 (port->partner_oper.port_state & LACP_STATE_SYNCHRONIZATION) &&
972 !__check_agg_selection_timer(port)) {
973 if (port->aggregator->is_active)
974 port->sm_mux_state =
975 AD_MUX_COLLECTING_DISTRIBUTING;
976 } else if (!(port->sm_vars & AD_PORT_SELECTED) ||
977 (port->sm_vars & AD_PORT_STANDBY)) {
978 /* if UNSELECTED or STANDBY */
979 port->sm_vars &= ~AD_PORT_READY_N;
980 /* in order to withhold the selection logic to
981 * check all ports READY_N value every callback
982 * cycle to update ready variable, we check
983 * READY_N and update READY here
984 */
985 __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
986 port->sm_mux_state = AD_MUX_DETACHED;
987 } else if (port->aggregator->is_active) {
988 port->actor_oper_port_state |=
989 LACP_STATE_SYNCHRONIZATION;
990 }
991 break;
992 case AD_MUX_COLLECTING_DISTRIBUTING:
993 if (!(port->sm_vars & AD_PORT_SELECTED) ||
994 (port->sm_vars & AD_PORT_STANDBY) ||
995 !(port->partner_oper.port_state & LACP_STATE_SYNCHRONIZATION) ||
996 !(port->actor_oper_port_state & LACP_STATE_SYNCHRONIZATION)) {
997 port->sm_mux_state = AD_MUX_ATTACHED;
998 } else {
999 /* if port state hasn't changed make
1000 * sure that a collecting distributing
1001 * port in an active aggregator is enabled
1002 */
1003 if (port->aggregator &&
1004 port->aggregator->is_active &&
1005 !__port_is_enabled(port)) {
1006
1007 __enable_port(port);
1008 }
1009 }
1010 break;
1011 default:
1012 break;
1013 }
1014 }
1015
1016 /* check if the state machine was changed */
1017 if (port->sm_mux_state != last_state) {
1018 slave_dbg(port->slave->bond->dev, port->slave->dev,
1019 "Mux Machine: Port=%d, Last State=%d, Curr State=%d\n",
1020 port->actor_port_number,
1021 last_state,
1022 port->sm_mux_state);
1023 switch (port->sm_mux_state) {
1024 case AD_MUX_DETACHED:
1025 port->actor_oper_port_state &= ~LACP_STATE_SYNCHRONIZATION;
1026 ad_disable_collecting_distributing(port,
1027 update_slave_arr);
1028 port->actor_oper_port_state &= ~LACP_STATE_COLLECTING;
1029 port->actor_oper_port_state &= ~LACP_STATE_DISTRIBUTING;
1030 port->ntt = true;
1031 break;
1032 case AD_MUX_WAITING:
1033 port->sm_mux_timer_counter = __ad_timer_to_ticks(AD_WAIT_WHILE_TIMER, 0);
1034 break;
1035 case AD_MUX_ATTACHED:
1036 if (port->aggregator->is_active)
1037 port->actor_oper_port_state |=
1038 LACP_STATE_SYNCHRONIZATION;
1039 else
1040 port->actor_oper_port_state &=
1041 ~LACP_STATE_SYNCHRONIZATION;
1042 port->actor_oper_port_state &= ~LACP_STATE_COLLECTING;
1043 port->actor_oper_port_state &= ~LACP_STATE_DISTRIBUTING;
1044 ad_disable_collecting_distributing(port,
1045 update_slave_arr);
1046 port->ntt = true;
1047 break;
1048 case AD_MUX_COLLECTING_DISTRIBUTING:
1049 port->actor_oper_port_state |= LACP_STATE_COLLECTING;
1050 port->actor_oper_port_state |= LACP_STATE_DISTRIBUTING;
1051 port->actor_oper_port_state |= LACP_STATE_SYNCHRONIZATION;
1052 ad_enable_collecting_distributing(port,
1053 update_slave_arr);
1054 port->ntt = true;
1055 break;
1056 default:
1057 break;
1058 }
1059 }
1060 }
1061
1062 /**
1063 * ad_rx_machine - handle a port's rx State Machine
1064 * @lacpdu: the lacpdu we've received
1065 * @port: the port we're looking at
1066 *
1067 * If lacpdu arrived, stop previous timer (if exists) and set the next state as
1068 * CURRENT. If timer expired set the state machine in the proper state.
1069 * In other cases, this function checks if we need to switch to other state.
1070 */
1071 static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
1072 {
1073 rx_states_t last_state;
1074
1075 /* keep current State Machine state to compare later if it was
1076 * changed
1077 */
1078 last_state = port->sm_rx_state;
1079
1080 if (lacpdu) {
1081 atomic64_inc(&SLAVE_AD_INFO(port->slave)->stats.lacpdu_rx);
1082 atomic64_inc(&BOND_AD_INFO(port->slave->bond).stats.lacpdu_rx);
1083 }
1084 /* check if state machine should change state */
1085
1086 /* first, check if port was reinitialized */
1087 if (port->sm_vars & AD_PORT_BEGIN) {
1088 port->sm_rx_state = AD_RX_INITIALIZE;
1089 port->sm_vars |= AD_PORT_CHURNED;
1090 /* check if port is not enabled */
1091 } else if (!(port->sm_vars & AD_PORT_BEGIN) && !port->is_enabled)
1092 port->sm_rx_state = AD_RX_PORT_DISABLED;
1093 /* check if new lacpdu arrived */
1094 else if (lacpdu && ((port->sm_rx_state == AD_RX_EXPIRED) ||
1095 (port->sm_rx_state == AD_RX_DEFAULTED) ||
1096 (port->sm_rx_state == AD_RX_CURRENT))) {
1097 if (port->sm_rx_state != AD_RX_CURRENT)
1098 port->sm_vars |= AD_PORT_CHURNED;
1099 port->sm_rx_timer_counter = 0;
1100 port->sm_rx_state = AD_RX_CURRENT;
1101 } else {
1102 /* if timer is on, and if it is expired */
1103 if (port->sm_rx_timer_counter &&
1104 !(--port->sm_rx_timer_counter)) {
1105 switch (port->sm_rx_state) {
1106 case AD_RX_EXPIRED:
1107 port->sm_rx_state = AD_RX_DEFAULTED;
1108 break;
1109 case AD_RX_CURRENT:
1110 port->sm_rx_state = AD_RX_EXPIRED;
1111 break;
1112 default:
1113 break;
1114 }
1115 } else {
1116 /* if no lacpdu arrived and no timer is on */
1117 switch (port->sm_rx_state) {
1118 case AD_RX_PORT_DISABLED:
1119 if (port->is_enabled &&
1120 (port->sm_vars & AD_PORT_LACP_ENABLED))
1121 port->sm_rx_state = AD_RX_EXPIRED;
1122 else if (port->is_enabled
1123 && ((port->sm_vars
1124 & AD_PORT_LACP_ENABLED) == 0))
1125 port->sm_rx_state = AD_RX_LACP_DISABLED;
1126 break;
1127 default:
1128 break;
1129
1130 }
1131 }
1132 }
1133
1134 /* check if the State machine was changed or new lacpdu arrived */
1135 if ((port->sm_rx_state != last_state) || (lacpdu)) {
1136 slave_dbg(port->slave->bond->dev, port->slave->dev,
1137 "Rx Machine: Port=%d, Last State=%d, Curr State=%d\n",
1138 port->actor_port_number,
1139 last_state,
1140 port->sm_rx_state);
1141 switch (port->sm_rx_state) {
1142 case AD_RX_INITIALIZE:
1143 if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_MASKS))
1144 port->sm_vars &= ~AD_PORT_LACP_ENABLED;
1145 else
1146 port->sm_vars |= AD_PORT_LACP_ENABLED;
1147 port->sm_vars &= ~AD_PORT_SELECTED;
1148 __record_default(port);
1149 port->actor_oper_port_state &= ~LACP_STATE_EXPIRED;
1150 port->sm_rx_state = AD_RX_PORT_DISABLED;
1151
1152 /* Fall Through */
1153 case AD_RX_PORT_DISABLED:
1154 port->sm_vars &= ~AD_PORT_MATCHED;
1155 break;
1156 case AD_RX_LACP_DISABLED:
1157 port->sm_vars &= ~AD_PORT_SELECTED;
1158 __record_default(port);
1159 port->partner_oper.port_state &= ~LACP_STATE_AGGREGATION;
1160 port->sm_vars |= AD_PORT_MATCHED;
1161 port->actor_oper_port_state &= ~LACP_STATE_EXPIRED;
1162 break;
1163 case AD_RX_EXPIRED:
1164 /* Reset of the Synchronization flag (Standard 43.4.12)
1165 * This reset cause to disable this port in the
1166 * COLLECTING_DISTRIBUTING state of the mux machine in
1167 * case of EXPIRED even if LINK_DOWN didn't arrive for
1168 * the port.
1169 */
1170 port->partner_oper.port_state &= ~LACP_STATE_SYNCHRONIZATION;
1171 port->sm_vars &= ~AD_PORT_MATCHED;
1172 port->partner_oper.port_state |= LACP_STATE_LACP_TIMEOUT;
1173 port->partner_oper.port_state |= LACP_STATE_LACP_ACTIVITY;
1174 port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(AD_SHORT_TIMEOUT));
1175 port->actor_oper_port_state |= LACP_STATE_EXPIRED;
1176 port->sm_vars |= AD_PORT_CHURNED;
1177 break;
1178 case AD_RX_DEFAULTED:
1179 __update_default_selected(port);
1180 __record_default(port);
1181 port->sm_vars |= AD_PORT_MATCHED;
1182 port->actor_oper_port_state &= ~LACP_STATE_EXPIRED;
1183 break;
1184 case AD_RX_CURRENT:
1185 /* detect loopback situation */
1186 if (MAC_ADDRESS_EQUAL(&(lacpdu->actor_system),
1187 &(port->actor_system))) {
1188 slave_err(port->slave->bond->dev, port->slave->dev, "An illegal loopback occurred on slave\n"
1189 "Check the configuration to verify that all adapters are connected to 802.3ad compliant switch ports\n");
1190 return;
1191 }
1192 __update_selected(lacpdu, port);
1193 __update_ntt(lacpdu, port);
1194 __record_pdu(lacpdu, port);
1195 port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(port->actor_oper_port_state & LACP_STATE_LACP_TIMEOUT));
1196 port->actor_oper_port_state &= ~LACP_STATE_EXPIRED;
1197 break;
1198 default:
1199 break;
1200 }
1201 }
1202 }
1203
1204 /**
1205 * ad_churn_machine - handle port churn's state machine
1206 * @port: the port we're looking at
1207 *
1208 */
1209 static void ad_churn_machine(struct port *port)
1210 {
1211 if (port->sm_vars & AD_PORT_CHURNED) {
1212 port->sm_vars &= ~AD_PORT_CHURNED;
1213 port->sm_churn_actor_state = AD_CHURN_MONITOR;
1214 port->sm_churn_partner_state = AD_CHURN_MONITOR;
1215 port->sm_churn_actor_timer_counter =
1216 __ad_timer_to_ticks(AD_ACTOR_CHURN_TIMER, 0);
1217 port->sm_churn_partner_timer_counter =
1218 __ad_timer_to_ticks(AD_PARTNER_CHURN_TIMER, 0);
1219 return;
1220 }
1221 if (port->sm_churn_actor_timer_counter &&
1222 !(--port->sm_churn_actor_timer_counter) &&
1223 port->sm_churn_actor_state == AD_CHURN_MONITOR) {
1224 if (port->actor_oper_port_state & LACP_STATE_SYNCHRONIZATION) {
1225 port->sm_churn_actor_state = AD_NO_CHURN;
1226 } else {
1227 port->churn_actor_count++;
1228 port->sm_churn_actor_state = AD_CHURN;
1229 }
1230 }
1231 if (port->sm_churn_partner_timer_counter &&
1232 !(--port->sm_churn_partner_timer_counter) &&
1233 port->sm_churn_partner_state == AD_CHURN_MONITOR) {
1234 if (port->partner_oper.port_state & LACP_STATE_SYNCHRONIZATION) {
1235 port->sm_churn_partner_state = AD_NO_CHURN;
1236 } else {
1237 port->churn_partner_count++;
1238 port->sm_churn_partner_state = AD_CHURN;
1239 }
1240 }
1241 }
1242
1243 /**
1244 * ad_tx_machine - handle a port's tx state machine
1245 * @port: the port we're looking at
1246 */
1247 static void ad_tx_machine(struct port *port)
1248 {
1249 /* check if tx timer expired, to verify that we do not send more than
1250 * 3 packets per second
1251 */
1252 if (port->sm_tx_timer_counter && !(--port->sm_tx_timer_counter)) {
1253 /* check if there is something to send */
1254 if (port->ntt && (port->sm_vars & AD_PORT_LACP_ENABLED)) {
1255 __update_lacpdu_from_port(port);
1256
1257 if (ad_lacpdu_send(port) >= 0) {
1258 slave_dbg(port->slave->bond->dev,
1259 port->slave->dev,
1260 "Sent LACPDU on port %d\n",
1261 port->actor_port_number);
1262
1263 /* mark ntt as false, so it will not be sent
1264 * again until demanded
1265 */
1266 port->ntt = false;
1267 }
1268 }
1269 /* restart tx timer(to verify that we will not exceed
1270 * AD_MAX_TX_IN_SECOND
1271 */
1272 port->sm_tx_timer_counter = ad_ticks_per_sec/AD_MAX_TX_IN_SECOND;
1273 }
1274 }
1275
1276 /**
1277 * ad_periodic_machine - handle a port's periodic state machine
1278 * @port: the port we're looking at
1279 *
1280 * Turn ntt flag on priodically to perform periodic transmission of lacpdu's.
1281 */
1282 static void ad_periodic_machine(struct port *port)
1283 {
1284 periodic_states_t last_state;
1285
1286 /* keep current state machine state to compare later if it was changed */
1287 last_state = port->sm_periodic_state;
1288
1289 /* check if port was reinitialized */
1290 if (((port->sm_vars & AD_PORT_BEGIN) || !(port->sm_vars & AD_PORT_LACP_ENABLED) || !port->is_enabled) ||
1291 (!(port->actor_oper_port_state & LACP_STATE_LACP_ACTIVITY) && !(port->partner_oper.port_state & LACP_STATE_LACP_ACTIVITY))
1292 ) {
1293 port->sm_periodic_state = AD_NO_PERIODIC;
1294 }
1295 /* check if state machine should change state */
1296 else if (port->sm_periodic_timer_counter) {
1297 /* check if periodic state machine expired */
1298 if (!(--port->sm_periodic_timer_counter)) {
1299 /* if expired then do tx */
1300 port->sm_periodic_state = AD_PERIODIC_TX;
1301 } else {
1302 /* If not expired, check if there is some new timeout
1303 * parameter from the partner state
1304 */
1305 switch (port->sm_periodic_state) {
1306 case AD_FAST_PERIODIC:
1307 if (!(port->partner_oper.port_state
1308 & LACP_STATE_LACP_TIMEOUT))
1309 port->sm_periodic_state = AD_SLOW_PERIODIC;
1310 break;
1311 case AD_SLOW_PERIODIC:
1312 if ((port->partner_oper.port_state & LACP_STATE_LACP_TIMEOUT)) {
1313 port->sm_periodic_timer_counter = 0;
1314 port->sm_periodic_state = AD_PERIODIC_TX;
1315 }
1316 break;
1317 default:
1318 break;
1319 }
1320 }
1321 } else {
1322 switch (port->sm_periodic_state) {
1323 case AD_NO_PERIODIC:
1324 port->sm_periodic_state = AD_FAST_PERIODIC;
1325 break;
1326 case AD_PERIODIC_TX:
1327 if (!(port->partner_oper.port_state &
1328 LACP_STATE_LACP_TIMEOUT))
1329 port->sm_periodic_state = AD_SLOW_PERIODIC;
1330 else
1331 port->sm_periodic_state = AD_FAST_PERIODIC;
1332 break;
1333 default:
1334 break;
1335 }
1336 }
1337
1338 /* check if the state machine was changed */
1339 if (port->sm_periodic_state != last_state) {
1340 slave_dbg(port->slave->bond->dev, port->slave->dev,
1341 "Periodic Machine: Port=%d, Last State=%d, Curr State=%d\n",
1342 port->actor_port_number, last_state,
1343 port->sm_periodic_state);
1344 switch (port->sm_periodic_state) {
1345 case AD_NO_PERIODIC:
1346 port->sm_periodic_timer_counter = 0;
1347 break;
1348 case AD_FAST_PERIODIC:
1349 /* decrement 1 tick we lost in the PERIODIC_TX cycle */
1350 port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_FAST_PERIODIC_TIME))-1;
1351 break;
1352 case AD_SLOW_PERIODIC:
1353 /* decrement 1 tick we lost in the PERIODIC_TX cycle */
1354 port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_SLOW_PERIODIC_TIME))-1;
1355 break;
1356 case AD_PERIODIC_TX:
1357 port->ntt = true;
1358 break;
1359 default:
1360 break;
1361 }
1362 }
1363 }
1364
1365 /**
1366 * ad_port_selection_logic - select aggregation groups
1367 * @port: the port we're looking at
1368 * @update_slave_arr: Does slave array need update?
1369 *
1370 * Select aggregation groups, and assign each port for it's aggregetor. The
1371 * selection logic is called in the inititalization (after all the handshkes),
1372 * and after every lacpdu receive (if selected is off).
1373 */
1374 static void ad_port_selection_logic(struct port *port, bool *update_slave_arr)
1375 {
1376 struct aggregator *aggregator, *free_aggregator = NULL, *temp_aggregator;
1377 struct port *last_port = NULL, *curr_port;
1378 struct list_head *iter;
1379 struct bonding *bond;
1380 struct slave *slave;
1381 int found = 0;
1382
1383 /* if the port is already Selected, do nothing */
1384 if (port->sm_vars & AD_PORT_SELECTED)
1385 return;
1386
1387 bond = __get_bond_by_port(port);
1388
1389 /* if the port is connected to other aggregator, detach it */
1390 if (port->aggregator) {
1391 /* detach the port from its former aggregator */
1392 temp_aggregator = port->aggregator;
1393 for (curr_port = temp_aggregator->lag_ports; curr_port;
1394 last_port = curr_port,
1395 curr_port = curr_port->next_port_in_aggregator) {
1396 if (curr_port == port) {
1397 temp_aggregator->num_of_ports--;
1398 /* if it is the first port attached to the
1399 * aggregator
1400 */
1401 if (!last_port) {
1402 temp_aggregator->lag_ports =
1403 port->next_port_in_aggregator;
1404 } else {
1405 /* not the first port attached to the
1406 * aggregator
1407 */
1408 last_port->next_port_in_aggregator =
1409 port->next_port_in_aggregator;
1410 }
1411
1412 /* clear the port's relations to this
1413 * aggregator
1414 */
1415 port->aggregator = NULL;
1416 port->next_port_in_aggregator = NULL;
1417 port->actor_port_aggregator_identifier = 0;
1418
1419 slave_dbg(bond->dev, port->slave->dev, "Port %d left LAG %d\n",
1420 port->actor_port_number,
1421 temp_aggregator->aggregator_identifier);
1422 /* if the aggregator is empty, clear its
1423 * parameters, and set it ready to be attached
1424 */
1425 if (!temp_aggregator->lag_ports)
1426 ad_clear_agg(temp_aggregator);
1427 break;
1428 }
1429 }
1430 if (!curr_port) {
1431 /* meaning: the port was related to an aggregator
1432 * but was not on the aggregator port list
1433 */
1434 net_warn_ratelimited("%s: (slave %s): Warning: Port %d was related to aggregator %d but was not on its port list\n",
1435 port->slave->bond->dev->name,
1436 port->slave->dev->name,
1437 port->actor_port_number,
1438 port->aggregator->aggregator_identifier);
1439 }
1440 }
1441 /* search on all aggregators for a suitable aggregator for this port */
1442 bond_for_each_slave(bond, slave, iter) {
1443 aggregator = &(SLAVE_AD_INFO(slave)->aggregator);
1444
1445 /* keep a free aggregator for later use(if needed) */
1446 if (!aggregator->lag_ports) {
1447 if (!free_aggregator)
1448 free_aggregator = aggregator;
1449 continue;
1450 }
1451 /* check if current aggregator suits us */
1452 if (((aggregator->actor_oper_aggregator_key == port->actor_oper_port_key) && /* if all parameters match AND */
1453 MAC_ADDRESS_EQUAL(&(aggregator->partner_system), &(port->partner_oper.system)) &&
1454 (aggregator->partner_system_priority == port->partner_oper.system_priority) &&
1455 (aggregator->partner_oper_aggregator_key == port->partner_oper.key)
1456 ) &&
1457 ((!MAC_ADDRESS_EQUAL(&(port->partner_oper.system), &(null_mac_addr)) && /* partner answers */
1458 !aggregator->is_individual) /* but is not individual OR */
1459 )
1460 ) {
1461 /* attach to the founded aggregator */
1462 port->aggregator = aggregator;
1463 port->actor_port_aggregator_identifier =
1464 port->aggregator->aggregator_identifier;
1465 port->next_port_in_aggregator = aggregator->lag_ports;
1466 port->aggregator->num_of_ports++;
1467 aggregator->lag_ports = port;
1468 slave_dbg(bond->dev, slave->dev, "Port %d joined LAG %d (existing LAG)\n",
1469 port->actor_port_number,
1470 port->aggregator->aggregator_identifier);
1471
1472 /* mark this port as selected */
1473 port->sm_vars |= AD_PORT_SELECTED;
1474 found = 1;
1475 break;
1476 }
1477 }
1478
1479 /* the port couldn't find an aggregator - attach it to a new
1480 * aggregator
1481 */
1482 if (!found) {
1483 if (free_aggregator) {
1484 /* assign port a new aggregator */
1485 port->aggregator = free_aggregator;
1486 port->actor_port_aggregator_identifier =
1487 port->aggregator->aggregator_identifier;
1488
1489 /* update the new aggregator's parameters
1490 * if port was responsed from the end-user
1491 */
1492 if (port->actor_oper_port_key & AD_DUPLEX_KEY_MASKS)
1493 /* if port is full duplex */
1494 port->aggregator->is_individual = false;
1495 else
1496 port->aggregator->is_individual = true;
1497
1498 port->aggregator->actor_admin_aggregator_key =
1499 port->actor_admin_port_key;
1500 port->aggregator->actor_oper_aggregator_key =
1501 port->actor_oper_port_key;
1502 port->aggregator->partner_system =
1503 port->partner_oper.system;
1504 port->aggregator->partner_system_priority =
1505 port->partner_oper.system_priority;
1506 port->aggregator->partner_oper_aggregator_key = port->partner_oper.key;
1507 port->aggregator->receive_state = 1;
1508 port->aggregator->transmit_state = 1;
1509 port->aggregator->lag_ports = port;
1510 port->aggregator->num_of_ports++;
1511
1512 /* mark this port as selected */
1513 port->sm_vars |= AD_PORT_SELECTED;
1514
1515 slave_dbg(bond->dev, port->slave->dev, "Port %d joined LAG %d (new LAG)\n",
1516 port->actor_port_number,
1517 port->aggregator->aggregator_identifier);
1518 } else {
1519 slave_err(bond->dev, port->slave->dev,
1520 "Port %d did not find a suitable aggregator\n",
1521 port->actor_port_number);
1522 }
1523 }
1524 /* if all aggregator's ports are READY_N == TRUE, set ready=TRUE
1525 * in all aggregator's ports, else set ready=FALSE in all
1526 * aggregator's ports
1527 */
1528 __set_agg_ports_ready(port->aggregator,
1529 __agg_ports_are_ready(port->aggregator));
1530
1531 aggregator = __get_first_agg(port);
1532 ad_agg_selection_logic(aggregator, update_slave_arr);
1533
1534 if (!port->aggregator->is_active)
1535 port->actor_oper_port_state &= ~LACP_STATE_SYNCHRONIZATION;
1536 }
1537
1538 /* Decide if "agg" is a better choice for the new active aggregator that
1539 * the current best, according to the ad_select policy.
1540 */
1541 static struct aggregator *ad_agg_selection_test(struct aggregator *best,
1542 struct aggregator *curr)
1543 {
1544 /* 0. If no best, select current.
1545 *
1546 * 1. If the current agg is not individual, and the best is
1547 * individual, select current.
1548 *
1549 * 2. If current agg is individual and the best is not, keep best.
1550 *
1551 * 3. Therefore, current and best are both individual or both not
1552 * individual, so:
1553 *
1554 * 3a. If current agg partner replied, and best agg partner did not,
1555 * select current.
1556 *
1557 * 3b. If current agg partner did not reply and best agg partner
1558 * did reply, keep best.
1559 *
1560 * 4. Therefore, current and best both have partner replies or
1561 * both do not, so perform selection policy:
1562 *
1563 * BOND_AD_COUNT: Select by count of ports. If count is equal,
1564 * select by bandwidth.
1565 *
1566 * BOND_AD_STABLE, BOND_AD_BANDWIDTH: Select by bandwidth.
1567 */
1568 if (!best)
1569 return curr;
1570
1571 if (!curr->is_individual && best->is_individual)
1572 return curr;
1573
1574 if (curr->is_individual && !best->is_individual)
1575 return best;
1576
1577 if (__agg_has_partner(curr) && !__agg_has_partner(best))
1578 return curr;
1579
1580 if (!__agg_has_partner(curr) && __agg_has_partner(best))
1581 return best;
1582
1583 switch (__get_agg_selection_mode(curr->lag_ports)) {
1584 case BOND_AD_COUNT:
1585 if (__agg_active_ports(curr) > __agg_active_ports(best))
1586 return curr;
1587
1588 if (__agg_active_ports(curr) < __agg_active_ports(best))
1589 return best;
1590
1591 /*FALLTHROUGH*/
1592 case BOND_AD_STABLE:
1593 case BOND_AD_BANDWIDTH:
1594 if (__get_agg_bandwidth(curr) > __get_agg_bandwidth(best))
1595 return curr;
1596
1597 break;
1598
1599 default:
1600 net_warn_ratelimited("%s: (slave %s): Impossible agg select mode %d\n",
1601 curr->slave->bond->dev->name,
1602 curr->slave->dev->name,
1603 __get_agg_selection_mode(curr->lag_ports));
1604 break;
1605 }
1606
1607 return best;
1608 }
1609
1610 static int agg_device_up(const struct aggregator *agg)
1611 {
1612 struct port *port = agg->lag_ports;
1613
1614 if (!port)
1615 return 0;
1616
1617 for (port = agg->lag_ports; port;
1618 port = port->next_port_in_aggregator) {
1619 if (netif_running(port->slave->dev) &&
1620 netif_carrier_ok(port->slave->dev))
1621 return 1;
1622 }
1623
1624 return 0;
1625 }
1626
1627 /**
1628 * ad_agg_selection_logic - select an aggregation group for a team
1629 * @aggregator: the aggregator we're looking at
1630 * @update_slave_arr: Does slave array need update?
1631 *
1632 * It is assumed that only one aggregator may be selected for a team.
1633 *
1634 * The logic of this function is to select the aggregator according to
1635 * the ad_select policy:
1636 *
1637 * BOND_AD_STABLE: select the aggregator with the most ports attached to
1638 * it, and to reselect the active aggregator only if the previous
1639 * aggregator has no more ports related to it.
1640 *
1641 * BOND_AD_BANDWIDTH: select the aggregator with the highest total
1642 * bandwidth, and reselect whenever a link state change takes place or the
1643 * set of slaves in the bond changes.
1644 *
1645 * BOND_AD_COUNT: select the aggregator with largest number of ports
1646 * (slaves), and reselect whenever a link state change takes place or the
1647 * set of slaves in the bond changes.
1648 *
1649 * FIXME: this function MUST be called with the first agg in the bond, or
1650 * __get_active_agg() won't work correctly. This function should be better
1651 * called with the bond itself, and retrieve the first agg from it.
1652 */
1653 static void ad_agg_selection_logic(struct aggregator *agg,
1654 bool *update_slave_arr)
1655 {
1656 struct aggregator *best, *active, *origin;
1657 struct bonding *bond = agg->slave->bond;
1658 struct list_head *iter;
1659 struct slave *slave;
1660 struct port *port;
1661
1662 rcu_read_lock();
1663 origin = agg;
1664 active = __get_active_agg(agg);
1665 best = (active && agg_device_up(active)) ? active : NULL;
1666
1667 bond_for_each_slave_rcu(bond, slave, iter) {
1668 agg = &(SLAVE_AD_INFO(slave)->aggregator);
1669
1670 agg->is_active = 0;
1671
1672 if (__agg_active_ports(agg) && agg_device_up(agg))
1673 best = ad_agg_selection_test(best, agg);
1674 }
1675
1676 if (best &&
1677 __get_agg_selection_mode(best->lag_ports) == BOND_AD_STABLE) {
1678 /* For the STABLE policy, don't replace the old active
1679 * aggregator if it's still active (it has an answering
1680 * partner) or if both the best and active don't have an
1681 * answering partner.
1682 */
1683 if (active && active->lag_ports &&
1684 __agg_active_ports(active) &&
1685 (__agg_has_partner(active) ||
1686 (!__agg_has_partner(active) &&
1687 !__agg_has_partner(best)))) {
1688 if (!(!active->actor_oper_aggregator_key &&
1689 best->actor_oper_aggregator_key)) {
1690 best = NULL;
1691 active->is_active = 1;
1692 }
1693 }
1694 }
1695
1696 if (best && (best == active)) {
1697 best = NULL;
1698 active->is_active = 1;
1699 }
1700
1701 /* if there is new best aggregator, activate it */
1702 if (best) {
1703 netdev_dbg(bond->dev, "(slave %s): best Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n",
1704 best->slave ? best->slave->dev->name : "NULL",
1705 best->aggregator_identifier, best->num_of_ports,
1706 best->actor_oper_aggregator_key,
1707 best->partner_oper_aggregator_key,
1708 best->is_individual, best->is_active);
1709 netdev_dbg(bond->dev, "(slave %s): best ports %p slave %p\n",
1710 best->slave ? best->slave->dev->name : "NULL",
1711 best->lag_ports, best->slave);
1712
1713 bond_for_each_slave_rcu(bond, slave, iter) {
1714 agg = &(SLAVE_AD_INFO(slave)->aggregator);
1715
1716 slave_dbg(bond->dev, slave->dev, "Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n",
1717 agg->aggregator_identifier, agg->num_of_ports,
1718 agg->actor_oper_aggregator_key,
1719 agg->partner_oper_aggregator_key,
1720 agg->is_individual, agg->is_active);
1721 }
1722
1723 /* check if any partner replies */
1724 if (best->is_individual)
1725 net_warn_ratelimited("%s: Warning: No 802.3ad response from the link partner for any adapters in the bond\n",
1726 bond->dev->name);
1727
1728 best->is_active = 1;
1729 netdev_dbg(bond->dev, "(slave %s): LAG %d chosen as the active LAG\n",
1730 best->slave ? best->slave->dev->name : "NULL",
1731 best->aggregator_identifier);
1732 netdev_dbg(bond->dev, "(slave %s): Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n",
1733 best->slave ? best->slave->dev->name : "NULL",
1734 best->aggregator_identifier, best->num_of_ports,
1735 best->actor_oper_aggregator_key,
1736 best->partner_oper_aggregator_key,
1737 best->is_individual, best->is_active);
1738
1739 /* disable the ports that were related to the former
1740 * active_aggregator
1741 */
1742 if (active) {
1743 for (port = active->lag_ports; port;
1744 port = port->next_port_in_aggregator) {
1745 __disable_port(port);
1746 }
1747 }
1748 /* Slave array needs update. */
1749 *update_slave_arr = true;
1750 }
1751
1752 /* if the selected aggregator is of join individuals
1753 * (partner_system is NULL), enable their ports
1754 */
1755 active = __get_active_agg(origin);
1756
1757 if (active) {
1758 if (!__agg_has_partner(active)) {
1759 for (port = active->lag_ports; port;
1760 port = port->next_port_in_aggregator) {
1761 __enable_port(port);
1762 }
1763 }
1764 }
1765
1766 rcu_read_unlock();
1767
1768 bond_3ad_set_carrier(bond);
1769 }
1770
1771 /**
1772 * ad_clear_agg - clear a given aggregator's parameters
1773 * @aggregator: the aggregator we're looking at
1774 */
1775 static void ad_clear_agg(struct aggregator *aggregator)
1776 {
1777 if (aggregator) {
1778 aggregator->is_individual = false;
1779 aggregator->actor_admin_aggregator_key = 0;
1780 aggregator->actor_oper_aggregator_key = 0;
1781 eth_zero_addr(aggregator->partner_system.mac_addr_value);
1782 aggregator->partner_system_priority = 0;
1783 aggregator->partner_oper_aggregator_key = 0;
1784 aggregator->receive_state = 0;
1785 aggregator->transmit_state = 0;
1786 aggregator->lag_ports = NULL;
1787 aggregator->is_active = 0;
1788 aggregator->num_of_ports = 0;
1789 pr_debug("%s: LAG %d was cleared\n",
1790 aggregator->slave ?
1791 aggregator->slave->dev->name : "NULL",
1792 aggregator->aggregator_identifier);
1793 }
1794 }
1795
1796 /**
1797 * ad_initialize_agg - initialize a given aggregator's parameters
1798 * @aggregator: the aggregator we're looking at
1799 */
1800 static void ad_initialize_agg(struct aggregator *aggregator)
1801 {
1802 if (aggregator) {
1803 ad_clear_agg(aggregator);
1804
1805 eth_zero_addr(aggregator->aggregator_mac_address.mac_addr_value);
1806 aggregator->aggregator_identifier = 0;
1807 aggregator->slave = NULL;
1808 }
1809 }
1810
1811 /**
1812 * ad_initialize_port - initialize a given port's parameters
1813 * @aggregator: the aggregator we're looking at
1814 * @lacp_fast: boolean. whether fast periodic should be used
1815 */
1816 static void ad_initialize_port(struct port *port, int lacp_fast)
1817 {
1818 static const struct port_params tmpl = {
1819 .system_priority = 0xffff,
1820 .key = 1,
1821 .port_number = 1,
1822 .port_priority = 0xff,
1823 .port_state = 1,
1824 };
1825 static const struct lacpdu lacpdu = {
1826 .subtype = 0x01,
1827 .version_number = 0x01,
1828 .tlv_type_actor_info = 0x01,
1829 .actor_information_length = 0x14,
1830 .tlv_type_partner_info = 0x02,
1831 .partner_information_length = 0x14,
1832 .tlv_type_collector_info = 0x03,
1833 .collector_information_length = 0x10,
1834 .collector_max_delay = htons(AD_COLLECTOR_MAX_DELAY),
1835 };
1836
1837 if (port) {
1838 port->actor_port_priority = 0xff;
1839 port->actor_port_aggregator_identifier = 0;
1840 port->ntt = false;
1841 port->actor_admin_port_state = LACP_STATE_AGGREGATION |
1842 LACP_STATE_LACP_ACTIVITY;
1843 port->actor_oper_port_state = LACP_STATE_AGGREGATION |
1844 LACP_STATE_LACP_ACTIVITY;
1845
1846 if (lacp_fast)
1847 port->actor_oper_port_state |= LACP_STATE_LACP_TIMEOUT;
1848
1849 memcpy(&port->partner_admin, &tmpl, sizeof(tmpl));
1850 memcpy(&port->partner_oper, &tmpl, sizeof(tmpl));
1851
1852 port->is_enabled = true;
1853 /* private parameters */
1854 port->sm_vars = AD_PORT_BEGIN | AD_PORT_LACP_ENABLED;
1855 port->sm_rx_state = 0;
1856 port->sm_rx_timer_counter = 0;
1857 port->sm_periodic_state = 0;
1858 port->sm_periodic_timer_counter = 0;
1859 port->sm_mux_state = 0;
1860 port->sm_mux_timer_counter = 0;
1861 port->sm_tx_state = 0;
1862 port->aggregator = NULL;
1863 port->next_port_in_aggregator = NULL;
1864 port->transaction_id = 0;
1865
1866 port->sm_churn_actor_timer_counter = 0;
1867 port->sm_churn_actor_state = 0;
1868 port->churn_actor_count = 0;
1869 port->sm_churn_partner_timer_counter = 0;
1870 port->sm_churn_partner_state = 0;
1871 port->churn_partner_count = 0;
1872
1873 memcpy(&port->lacpdu, &lacpdu, sizeof(lacpdu));
1874 }
1875 }
1876
1877 /**
1878 * ad_enable_collecting_distributing - enable a port's transmit/receive
1879 * @port: the port we're looking at
1880 * @update_slave_arr: Does slave array need update?
1881 *
1882 * Enable @port if it's in an active aggregator
1883 */
1884 static void ad_enable_collecting_distributing(struct port *port,
1885 bool *update_slave_arr)
1886 {
1887 if (port->aggregator->is_active) {
1888 slave_dbg(port->slave->bond->dev, port->slave->dev,
1889 "Enabling port %d (LAG %d)\n",
1890 port->actor_port_number,
1891 port->aggregator->aggregator_identifier);
1892 __enable_port(port);
1893 /* Slave array needs update */
1894 *update_slave_arr = true;
1895 }
1896 }
1897
1898 /**
1899 * ad_disable_collecting_distributing - disable a port's transmit/receive
1900 * @port: the port we're looking at
1901 * @update_slave_arr: Does slave array need update?
1902 */
1903 static void ad_disable_collecting_distributing(struct port *port,
1904 bool *update_slave_arr)
1905 {
1906 if (port->aggregator &&
1907 !MAC_ADDRESS_EQUAL(&(port->aggregator->partner_system),
1908 &(null_mac_addr))) {
1909 slave_dbg(port->slave->bond->dev, port->slave->dev,
1910 "Disabling port %d (LAG %d)\n",
1911 port->actor_port_number,
1912 port->aggregator->aggregator_identifier);
1913 __disable_port(port);
1914 /* Slave array needs an update */
1915 *update_slave_arr = true;
1916 }
1917 }
1918
1919 /**
1920 * ad_marker_info_received - handle receive of a Marker information frame
1921 * @marker_info: Marker info received
1922 * @port: the port we're looking at
1923 */
1924 static void ad_marker_info_received(struct bond_marker *marker_info,
1925 struct port *port)
1926 {
1927 struct bond_marker marker;
1928
1929 atomic64_inc(&SLAVE_AD_INFO(port->slave)->stats.marker_rx);
1930 atomic64_inc(&BOND_AD_INFO(port->slave->bond).stats.marker_rx);
1931
1932 /* copy the received marker data to the response marker */
1933 memcpy(&marker, marker_info, sizeof(struct bond_marker));
1934 /* change the marker subtype to marker response */
1935 marker.tlv_type = AD_MARKER_RESPONSE_SUBTYPE;
1936
1937 /* send the marker response */
1938 if (ad_marker_send(port, &marker) >= 0)
1939 slave_dbg(port->slave->bond->dev, port->slave->dev,
1940 "Sent Marker Response on port %d\n",
1941 port->actor_port_number);
1942 }
1943
1944 /**
1945 * ad_marker_response_received - handle receive of a marker response frame
1946 * @marker: marker PDU received
1947 * @port: the port we're looking at
1948 *
1949 * This function does nothing since we decided not to implement send and handle
1950 * response for marker PDU's, in this stage, but only to respond to marker
1951 * information.
1952 */
1953 static void ad_marker_response_received(struct bond_marker *marker,
1954 struct port *port)
1955 {
1956 atomic64_inc(&SLAVE_AD_INFO(port->slave)->stats.marker_resp_rx);
1957 atomic64_inc(&BOND_AD_INFO(port->slave->bond).stats.marker_resp_rx);
1958
1959 /* DO NOTHING, SINCE WE DECIDED NOT TO IMPLEMENT THIS FEATURE FOR NOW */
1960 }
1961
1962 /* ========= AD exported functions to the main bonding code ========= */
1963
1964 /* Check aggregators status in team every T seconds */
1965 #define AD_AGGREGATOR_SELECTION_TIMER 8
1966
1967 /**
1968 * bond_3ad_initiate_agg_selection - initate aggregator selection
1969 * @bond: bonding struct
1970 *
1971 * Set the aggregation selection timer, to initiate an agg selection in
1972 * the very near future. Called during first initialization, and during
1973 * any down to up transitions of the bond.
1974 */
1975 void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout)
1976 {
1977 BOND_AD_INFO(bond).agg_select_timer = timeout;
1978 }
1979
1980 /**
1981 * bond_3ad_initialize - initialize a bond's 802.3ad parameters and structures
1982 * @bond: bonding struct to work on
1983 * @tick_resolution: tick duration (millisecond resolution)
1984 *
1985 * Can be called only after the mac address of the bond is set.
1986 */
1987 void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution)
1988 {
1989 /* check that the bond is not initialized yet */
1990 if (!MAC_ADDRESS_EQUAL(&(BOND_AD_INFO(bond).system.sys_mac_addr),
1991 bond->dev->dev_addr)) {
1992
1993 BOND_AD_INFO(bond).aggregator_identifier = 0;
1994
1995 BOND_AD_INFO(bond).system.sys_priority =
1996 bond->params.ad_actor_sys_prio;
1997 if (is_zero_ether_addr(bond->params.ad_actor_system))
1998 BOND_AD_INFO(bond).system.sys_mac_addr =
1999 *((struct mac_addr *)bond->dev->dev_addr);
2000 else
2001 BOND_AD_INFO(bond).system.sys_mac_addr =
2002 *((struct mac_addr *)bond->params.ad_actor_system);
2003
2004 /* initialize how many times this module is called in one
2005 * second (should be about every 100ms)
2006 */
2007 ad_ticks_per_sec = tick_resolution;
2008
2009 bond_3ad_initiate_agg_selection(bond,
2010 AD_AGGREGATOR_SELECTION_TIMER *
2011 ad_ticks_per_sec);
2012 }
2013 }
2014
2015 /**
2016 * bond_3ad_bind_slave - initialize a slave's port
2017 * @slave: slave struct to work on
2018 *
2019 * Returns: 0 on success
2020 * < 0 on error
2021 */
2022 void bond_3ad_bind_slave(struct slave *slave)
2023 {
2024 struct bonding *bond = bond_get_bond_by_slave(slave);
2025 struct port *port;
2026 struct aggregator *aggregator;
2027
2028 /* check that the slave has not been initialized yet. */
2029 if (SLAVE_AD_INFO(slave)->port.slave != slave) {
2030
2031 /* port initialization */
2032 port = &(SLAVE_AD_INFO(slave)->port);
2033
2034 ad_initialize_port(port, bond->params.lacp_fast);
2035
2036 port->slave = slave;
2037 port->actor_port_number = SLAVE_AD_INFO(slave)->id;
2038 /* key is determined according to the link speed, duplex and
2039 * user key
2040 */
2041 port->actor_admin_port_key = bond->params.ad_user_port_key << 6;
2042 ad_update_actor_keys(port, false);
2043 /* actor system is the bond's system */
2044 __ad_actor_update_port(port);
2045 /* tx timer(to verify that no more than MAX_TX_IN_SECOND
2046 * lacpdu's are sent in one second)
2047 */
2048 port->sm_tx_timer_counter = ad_ticks_per_sec/AD_MAX_TX_IN_SECOND;
2049
2050 __disable_port(port);
2051
2052 /* aggregator initialization */
2053 aggregator = &(SLAVE_AD_INFO(slave)->aggregator);
2054
2055 ad_initialize_agg(aggregator);
2056
2057 aggregator->aggregator_mac_address = *((struct mac_addr *)bond->dev->dev_addr);
2058 aggregator->aggregator_identifier = ++BOND_AD_INFO(bond).aggregator_identifier;
2059 aggregator->slave = slave;
2060 aggregator->is_active = 0;
2061 aggregator->num_of_ports = 0;
2062 }
2063 }
2064
2065 /**
2066 * bond_3ad_unbind_slave - deinitialize a slave's port
2067 * @slave: slave struct to work on
2068 *
2069 * Search for the aggregator that is related to this port, remove the
2070 * aggregator and assign another aggregator for other port related to it
2071 * (if any), and remove the port.
2072 */
2073 void bond_3ad_unbind_slave(struct slave *slave)
2074 {
2075 struct port *port, *prev_port, *temp_port;
2076 struct aggregator *aggregator, *new_aggregator, *temp_aggregator;
2077 int select_new_active_agg = 0;
2078 struct bonding *bond = slave->bond;
2079 struct slave *slave_iter;
2080 struct list_head *iter;
2081 bool dummy_slave_update; /* Ignore this value as caller updates array */
2082
2083 /* Sync against bond_3ad_state_machine_handler() */
2084 spin_lock_bh(&bond->mode_lock);
2085 aggregator = &(SLAVE_AD_INFO(slave)->aggregator);
2086 port = &(SLAVE_AD_INFO(slave)->port);
2087
2088 /* if slave is null, the whole port is not initialized */
2089 if (!port->slave) {
2090 slave_warn(bond->dev, slave->dev, "Trying to unbind an uninitialized port\n");
2091 goto out;
2092 }
2093
2094 slave_dbg(bond->dev, slave->dev, "Unbinding Link Aggregation Group %d\n",
2095 aggregator->aggregator_identifier);
2096
2097 /* Tell the partner that this port is not suitable for aggregation */
2098 port->actor_oper_port_state &= ~LACP_STATE_SYNCHRONIZATION;
2099 port->actor_oper_port_state &= ~LACP_STATE_COLLECTING;
2100 port->actor_oper_port_state &= ~LACP_STATE_DISTRIBUTING;
2101 port->actor_oper_port_state &= ~LACP_STATE_AGGREGATION;
2102 __update_lacpdu_from_port(port);
2103 ad_lacpdu_send(port);
2104
2105 /* check if this aggregator is occupied */
2106 if (aggregator->lag_ports) {
2107 /* check if there are other ports related to this aggregator
2108 * except the port related to this slave(thats ensure us that
2109 * there is a reason to search for new aggregator, and that we
2110 * will find one
2111 */
2112 if ((aggregator->lag_ports != port) ||
2113 (aggregator->lag_ports->next_port_in_aggregator)) {
2114 /* find new aggregator for the related port(s) */
2115 bond_for_each_slave(bond, slave_iter, iter) {
2116 new_aggregator = &(SLAVE_AD_INFO(slave_iter)->aggregator);
2117 /* if the new aggregator is empty, or it is
2118 * connected to our port only
2119 */
2120 if (!new_aggregator->lag_ports ||
2121 ((new_aggregator->lag_ports == port) &&
2122 !new_aggregator->lag_ports->next_port_in_aggregator))
2123 break;
2124 }
2125 if (!slave_iter)
2126 new_aggregator = NULL;
2127
2128 /* if new aggregator found, copy the aggregator's
2129 * parameters and connect the related lag_ports to the
2130 * new aggregator
2131 */
2132 if ((new_aggregator) && ((!new_aggregator->lag_ports) || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator))) {
2133 slave_dbg(bond->dev, slave->dev, "Some port(s) related to LAG %d - replacing with LAG %d\n",
2134 aggregator->aggregator_identifier,
2135 new_aggregator->aggregator_identifier);
2136
2137 if ((new_aggregator->lag_ports == port) &&
2138 new_aggregator->is_active) {
2139 slave_info(bond->dev, slave->dev, "Removing an active aggregator\n");
2140 select_new_active_agg = 1;
2141 }
2142
2143 new_aggregator->is_individual = aggregator->is_individual;
2144 new_aggregator->actor_admin_aggregator_key = aggregator->actor_admin_aggregator_key;
2145 new_aggregator->actor_oper_aggregator_key = aggregator->actor_oper_aggregator_key;
2146 new_aggregator->partner_system = aggregator->partner_system;
2147 new_aggregator->partner_system_priority = aggregator->partner_system_priority;
2148 new_aggregator->partner_oper_aggregator_key = aggregator->partner_oper_aggregator_key;
2149 new_aggregator->receive_state = aggregator->receive_state;
2150 new_aggregator->transmit_state = aggregator->transmit_state;
2151 new_aggregator->lag_ports = aggregator->lag_ports;
2152 new_aggregator->is_active = aggregator->is_active;
2153 new_aggregator->num_of_ports = aggregator->num_of_ports;
2154
2155 /* update the information that is written on
2156 * the ports about the aggregator
2157 */
2158 for (temp_port = aggregator->lag_ports; temp_port;
2159 temp_port = temp_port->next_port_in_aggregator) {
2160 temp_port->aggregator = new_aggregator;
2161 temp_port->actor_port_aggregator_identifier = new_aggregator->aggregator_identifier;
2162 }
2163
2164 ad_clear_agg(aggregator);
2165
2166 if (select_new_active_agg)
2167 ad_agg_selection_logic(__get_first_agg(port),
2168 &dummy_slave_update);
2169 } else {
2170 slave_warn(bond->dev, slave->dev, "unbinding aggregator, and could not find a new aggregator for its ports\n");
2171 }
2172 } else {
2173 /* in case that the only port related to this
2174 * aggregator is the one we want to remove
2175 */
2176 select_new_active_agg = aggregator->is_active;
2177 ad_clear_agg(aggregator);
2178 if (select_new_active_agg) {
2179 slave_info(bond->dev, slave->dev, "Removing an active aggregator\n");
2180 /* select new active aggregator */
2181 temp_aggregator = __get_first_agg(port);
2182 if (temp_aggregator)
2183 ad_agg_selection_logic(temp_aggregator,
2184 &dummy_slave_update);
2185 }
2186 }
2187 }
2188
2189 slave_dbg(bond->dev, slave->dev, "Unbinding port %d\n", port->actor_port_number);
2190
2191 /* find the aggregator that this port is connected to */
2192 bond_for_each_slave(bond, slave_iter, iter) {
2193 temp_aggregator = &(SLAVE_AD_INFO(slave_iter)->aggregator);
2194 prev_port = NULL;
2195 /* search the port in the aggregator's related ports */
2196 for (temp_port = temp_aggregator->lag_ports; temp_port;
2197 prev_port = temp_port,
2198 temp_port = temp_port->next_port_in_aggregator) {
2199 if (temp_port == port) {
2200 /* the aggregator found - detach the port from
2201 * this aggregator
2202 */
2203 if (prev_port)
2204 prev_port->next_port_in_aggregator = temp_port->next_port_in_aggregator;
2205 else
2206 temp_aggregator->lag_ports = temp_port->next_port_in_aggregator;
2207 temp_aggregator->num_of_ports--;
2208 if (__agg_active_ports(temp_aggregator) == 0) {
2209 select_new_active_agg = temp_aggregator->is_active;
2210 ad_clear_agg(temp_aggregator);
2211 if (select_new_active_agg) {
2212 slave_info(bond->dev, slave->dev, "Removing an active aggregator\n");
2213 /* select new active aggregator */
2214 ad_agg_selection_logic(__get_first_agg(port),
2215 &dummy_slave_update);
2216 }
2217 }
2218 break;
2219 }
2220 }
2221 }
2222 port->slave = NULL;
2223
2224 out:
2225 spin_unlock_bh(&bond->mode_lock);
2226 }
2227
2228 /**
2229 * bond_3ad_update_ad_actor_settings - reflect change of actor settings to ports
2230 * @bond: bonding struct to work on
2231 *
2232 * If an ad_actor setting gets changed we need to update the individual port
2233 * settings so the bond device will use the new values when it gets upped.
2234 */
2235 void bond_3ad_update_ad_actor_settings(struct bonding *bond)
2236 {
2237 struct list_head *iter;
2238 struct slave *slave;
2239
2240 ASSERT_RTNL();
2241
2242 BOND_AD_INFO(bond).system.sys_priority = bond->params.ad_actor_sys_prio;
2243 if (is_zero_ether_addr(bond->params.ad_actor_system))
2244 BOND_AD_INFO(bond).system.sys_mac_addr =
2245 *((struct mac_addr *)bond->dev->dev_addr);
2246 else
2247 BOND_AD_INFO(bond).system.sys_mac_addr =
2248 *((struct mac_addr *)bond->params.ad_actor_system);
2249
2250 spin_lock_bh(&bond->mode_lock);
2251 bond_for_each_slave(bond, slave, iter) {
2252 struct port *port = &(SLAVE_AD_INFO(slave))->port;
2253
2254 __ad_actor_update_port(port);
2255 port->ntt = true;
2256 }
2257 spin_unlock_bh(&bond->mode_lock);
2258 }
2259
2260 /**
2261 * bond_3ad_state_machine_handler - handle state machines timeout
2262 * @bond: bonding struct to work on
2263 *
2264 * The state machine handling concept in this module is to check every tick
2265 * which state machine should operate any function. The execution order is
2266 * round robin, so when we have an interaction between state machines, the
2267 * reply of one to each other might be delayed until next tick.
2268 *
2269 * This function also complete the initialization when the agg_select_timer
2270 * times out, and it selects an aggregator for the ports that are yet not
2271 * related to any aggregator, and selects the active aggregator for a bond.
2272 */
2273 void bond_3ad_state_machine_handler(struct work_struct *work)
2274 {
2275 struct bonding *bond = container_of(work, struct bonding,
2276 ad_work.work);
2277 struct aggregator *aggregator;
2278 struct list_head *iter;
2279 struct slave *slave;
2280 struct port *port;
2281 bool should_notify_rtnl = BOND_SLAVE_NOTIFY_LATER;
2282 bool update_slave_arr = false;
2283
2284 /* Lock to protect data accessed by all (e.g., port->sm_vars) and
2285 * against running with bond_3ad_unbind_slave. ad_rx_machine may run
2286 * concurrently due to incoming LACPDU as well.
2287 */
2288 spin_lock_bh(&bond->mode_lock);
2289 rcu_read_lock();
2290
2291 /* check if there are any slaves */
2292 if (!bond_has_slaves(bond))
2293 goto re_arm;
2294
2295 /* check if agg_select_timer timer after initialize is timed out */
2296 if (BOND_AD_INFO(bond).agg_select_timer &&
2297 !(--BOND_AD_INFO(bond).agg_select_timer)) {
2298 slave = bond_first_slave_rcu(bond);
2299 port = slave ? &(SLAVE_AD_INFO(slave)->port) : NULL;
2300
2301 /* select the active aggregator for the bond */
2302 if (port) {
2303 if (!port->slave) {
2304 net_warn_ratelimited("%s: Warning: bond's first port is uninitialized\n",
2305 bond->dev->name);
2306 goto re_arm;
2307 }
2308
2309 aggregator = __get_first_agg(port);
2310 ad_agg_selection_logic(aggregator, &update_slave_arr);
2311 }
2312 bond_3ad_set_carrier(bond);
2313 }
2314
2315 /* for each port run the state machines */
2316 bond_for_each_slave_rcu(bond, slave, iter) {
2317 port = &(SLAVE_AD_INFO(slave)->port);
2318 if (!port->slave) {
2319 net_warn_ratelimited("%s: Warning: Found an uninitialized port\n",
2320 bond->dev->name);
2321 goto re_arm;
2322 }
2323
2324 ad_rx_machine(NULL, port);
2325 ad_periodic_machine(port);
2326 ad_port_selection_logic(port, &update_slave_arr);
2327 ad_mux_machine(port, &update_slave_arr);
2328 ad_tx_machine(port);
2329 ad_churn_machine(port);
2330
2331 /* turn off the BEGIN bit, since we already handled it */
2332 if (port->sm_vars & AD_PORT_BEGIN)
2333 port->sm_vars &= ~AD_PORT_BEGIN;
2334 }
2335
2336 re_arm:
2337 bond_for_each_slave_rcu(bond, slave, iter) {
2338 if (slave->should_notify) {
2339 should_notify_rtnl = BOND_SLAVE_NOTIFY_NOW;
2340 break;
2341 }
2342 }
2343 rcu_read_unlock();
2344 spin_unlock_bh(&bond->mode_lock);
2345
2346 if (update_slave_arr)
2347 bond_slave_arr_work_rearm(bond, 0);
2348
2349 if (should_notify_rtnl && rtnl_trylock()) {
2350 bond_slave_state_notify(bond);
2351 rtnl_unlock();
2352 }
2353 queue_delayed_work(bond->wq, &bond->ad_work, ad_delta_in_ticks);
2354 }
2355
2356 /**
2357 * bond_3ad_rx_indication - handle a received frame
2358 * @lacpdu: received lacpdu
2359 * @slave: slave struct to work on
2360 *
2361 * It is assumed that frames that were sent on this NIC don't returned as new
2362 * received frames (loopback). Since only the payload is given to this
2363 * function, it check for loopback.
2364 */
2365 static int bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave)
2366 {
2367 struct bonding *bond = slave->bond;
2368 int ret = RX_HANDLER_ANOTHER;
2369 struct bond_marker *marker;
2370 struct port *port;
2371 atomic64_t *stat;
2372
2373 port = &(SLAVE_AD_INFO(slave)->port);
2374 if (!port->slave) {
2375 net_warn_ratelimited("%s: Warning: port of slave %s is uninitialized\n",
2376 slave->dev->name, slave->bond->dev->name);
2377 return ret;
2378 }
2379
2380 switch (lacpdu->subtype) {
2381 case AD_TYPE_LACPDU:
2382 ret = RX_HANDLER_CONSUMED;
2383 slave_dbg(slave->bond->dev, slave->dev,
2384 "Received LACPDU on port %d\n",
2385 port->actor_port_number);
2386 /* Protect against concurrent state machines */
2387 spin_lock(&slave->bond->mode_lock);
2388 ad_rx_machine(lacpdu, port);
2389 spin_unlock(&slave->bond->mode_lock);
2390 break;
2391 case AD_TYPE_MARKER:
2392 ret = RX_HANDLER_CONSUMED;
2393 /* No need to convert fields to Little Endian since we
2394 * don't use the marker's fields.
2395 */
2396 marker = (struct bond_marker *)lacpdu;
2397 switch (marker->tlv_type) {
2398 case AD_MARKER_INFORMATION_SUBTYPE:
2399 slave_dbg(slave->bond->dev, slave->dev, "Received Marker Information on port %d\n",
2400 port->actor_port_number);
2401 ad_marker_info_received(marker, port);
2402 break;
2403 case AD_MARKER_RESPONSE_SUBTYPE:
2404 slave_dbg(slave->bond->dev, slave->dev, "Received Marker Response on port %d\n",
2405 port->actor_port_number);
2406 ad_marker_response_received(marker, port);
2407 break;
2408 default:
2409 slave_dbg(slave->bond->dev, slave->dev, "Received an unknown Marker subtype on port %d\n",
2410 port->actor_port_number);
2411 stat = &SLAVE_AD_INFO(slave)->stats.marker_unknown_rx;
2412 atomic64_inc(stat);
2413 stat = &BOND_AD_INFO(bond).stats.marker_unknown_rx;
2414 atomic64_inc(stat);
2415 }
2416 break;
2417 default:
2418 atomic64_inc(&SLAVE_AD_INFO(slave)->stats.lacpdu_unknown_rx);
2419 atomic64_inc(&BOND_AD_INFO(bond).stats.lacpdu_unknown_rx);
2420 }
2421
2422 return ret;
2423 }
2424
2425 /**
2426 * ad_update_actor_keys - Update the oper / admin keys for a port based on
2427 * its current speed and duplex settings.
2428 *
2429 * @port: the port we'are looking at
2430 * @reset: Boolean to just reset the speed and the duplex part of the key
2431 *
2432 * The logic to change the oper / admin keys is:
2433 * (a) A full duplex port can participate in LACP with partner.
2434 * (b) When the speed is changed, LACP need to be reinitiated.
2435 */
2436 static void ad_update_actor_keys(struct port *port, bool reset)
2437 {
2438 u8 duplex = 0;
2439 u16 ospeed = 0, speed = 0;
2440 u16 old_oper_key = port->actor_oper_port_key;
2441
2442 port->actor_admin_port_key &= ~(AD_SPEED_KEY_MASKS|AD_DUPLEX_KEY_MASKS);
2443 if (!reset) {
2444 speed = __get_link_speed(port);
2445 ospeed = (old_oper_key & AD_SPEED_KEY_MASKS) >> 1;
2446 duplex = __get_duplex(port);
2447 port->actor_admin_port_key |= (speed << 1) | duplex;
2448 }
2449 port->actor_oper_port_key = port->actor_admin_port_key;
2450
2451 if (old_oper_key != port->actor_oper_port_key) {
2452 /* Only 'duplex' port participates in LACP */
2453 if (duplex)
2454 port->sm_vars |= AD_PORT_LACP_ENABLED;
2455 else
2456 port->sm_vars &= ~AD_PORT_LACP_ENABLED;
2457
2458 if (!reset) {
2459 if (!speed) {
2460 slave_err(port->slave->bond->dev,
2461 port->slave->dev,
2462 "speed changed to 0 on port %d\n",
2463 port->actor_port_number);
2464 } else if (duplex && ospeed != speed) {
2465 /* Speed change restarts LACP state-machine */
2466 port->sm_vars |= AD_PORT_BEGIN;
2467 }
2468 }
2469 }
2470 }
2471
2472 /**
2473 * bond_3ad_adapter_speed_duplex_changed - handle a slave's speed / duplex
2474 * change indication
2475 *
2476 * @slave: slave struct to work on
2477 *
2478 * Handle reselection of aggregator (if needed) for this port.
2479 */
2480 void bond_3ad_adapter_speed_duplex_changed(struct slave *slave)
2481 {
2482 struct port *port;
2483
2484 port = &(SLAVE_AD_INFO(slave)->port);
2485
2486 /* if slave is null, the whole port is not initialized */
2487 if (!port->slave) {
2488 slave_warn(slave->bond->dev, slave->dev,
2489 "speed/duplex changed for uninitialized port\n");
2490 return;
2491 }
2492
2493 spin_lock_bh(&slave->bond->mode_lock);
2494 ad_update_actor_keys(port, false);
2495 spin_unlock_bh(&slave->bond->mode_lock);
2496 slave_dbg(slave->bond->dev, slave->dev, "Port %d changed speed/duplex\n",
2497 port->actor_port_number);
2498 }
2499
2500 /**
2501 * bond_3ad_handle_link_change - handle a slave's link status change indication
2502 * @slave: slave struct to work on
2503 * @status: whether the link is now up or down
2504 *
2505 * Handle reselection of aggregator (if needed) for this port.
2506 */
2507 void bond_3ad_handle_link_change(struct slave *slave, char link)
2508 {
2509 struct aggregator *agg;
2510 struct port *port;
2511 bool dummy;
2512
2513 port = &(SLAVE_AD_INFO(slave)->port);
2514
2515 /* if slave is null, the whole port is not initialized */
2516 if (!port->slave) {
2517 slave_warn(slave->bond->dev, slave->dev, "link status changed for uninitialized port\n");
2518 return;
2519 }
2520
2521 spin_lock_bh(&slave->bond->mode_lock);
2522 /* on link down we are zeroing duplex and speed since
2523 * some of the adaptors(ce1000.lan) report full duplex/speed
2524 * instead of N/A(duplex) / 0(speed).
2525 *
2526 * on link up we are forcing recheck on the duplex and speed since
2527 * some of he adaptors(ce1000.lan) report.
2528 */
2529 if (link == BOND_LINK_UP) {
2530 port->is_enabled = true;
2531 ad_update_actor_keys(port, false);
2532 } else {
2533 /* link has failed */
2534 port->is_enabled = false;
2535 ad_update_actor_keys(port, true);
2536 }
2537 agg = __get_first_agg(port);
2538 ad_agg_selection_logic(agg, &dummy);
2539
2540 spin_unlock_bh(&slave->bond->mode_lock);
2541
2542 slave_dbg(slave->bond->dev, slave->dev, "Port %d changed link status to %s\n",
2543 port->actor_port_number,
2544 link == BOND_LINK_UP ? "UP" : "DOWN");
2545
2546 /* RTNL is held and mode_lock is released so it's safe
2547 * to update slave_array here.
2548 */
2549 bond_update_slave_arr(slave->bond, NULL);
2550 }
2551
2552 /**
2553 * bond_3ad_set_carrier - set link state for bonding master
2554 * @bond - bonding structure
2555 *
2556 * if we have an active aggregator, we're up, if not, we're down.
2557 * Presumes that we cannot have an active aggregator if there are
2558 * no slaves with link up.
2559 *
2560 * This behavior complies with IEEE 802.3 section 43.3.9.
2561 *
2562 * Called by bond_set_carrier(). Return zero if carrier state does not
2563 * change, nonzero if it does.
2564 */
2565 int bond_3ad_set_carrier(struct bonding *bond)
2566 {
2567 struct aggregator *active;
2568 struct slave *first_slave;
2569 int ret = 1;
2570
2571 rcu_read_lock();
2572 first_slave = bond_first_slave_rcu(bond);
2573 if (!first_slave) {
2574 ret = 0;
2575 goto out;
2576 }
2577 active = __get_active_agg(&(SLAVE_AD_INFO(first_slave)->aggregator));
2578 if (active) {
2579 /* are enough slaves available to consider link up? */
2580 if (__agg_active_ports(active) < bond->params.min_links) {
2581 if (netif_carrier_ok(bond->dev)) {
2582 netif_carrier_off(bond->dev);
2583 goto out;
2584 }
2585 } else if (!netif_carrier_ok(bond->dev)) {
2586 netif_carrier_on(bond->dev);
2587 goto out;
2588 }
2589 } else if (netif_carrier_ok(bond->dev)) {
2590 netif_carrier_off(bond->dev);
2591 }
2592 out:
2593 rcu_read_unlock();
2594 return ret;
2595 }
2596
2597 /**
2598 * __bond_3ad_get_active_agg_info - get information of the active aggregator
2599 * @bond: bonding struct to work on
2600 * @ad_info: ad_info struct to fill with the bond's info
2601 *
2602 * Returns: 0 on success
2603 * < 0 on error
2604 */
2605 int __bond_3ad_get_active_agg_info(struct bonding *bond,
2606 struct ad_info *ad_info)
2607 {
2608 struct aggregator *aggregator = NULL;
2609 struct list_head *iter;
2610 struct slave *slave;
2611 struct port *port;
2612
2613 bond_for_each_slave_rcu(bond, slave, iter) {
2614 port = &(SLAVE_AD_INFO(slave)->port);
2615 if (port->aggregator && port->aggregator->is_active) {
2616 aggregator = port->aggregator;
2617 break;
2618 }
2619 }
2620
2621 if (!aggregator)
2622 return -1;
2623
2624 ad_info->aggregator_id = aggregator->aggregator_identifier;
2625 ad_info->ports = __agg_active_ports(aggregator);
2626 ad_info->actor_key = aggregator->actor_oper_aggregator_key;
2627 ad_info->partner_key = aggregator->partner_oper_aggregator_key;
2628 ether_addr_copy(ad_info->partner_system,
2629 aggregator->partner_system.mac_addr_value);
2630 return 0;
2631 }
2632
2633 int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info)
2634 {
2635 int ret;
2636
2637 rcu_read_lock();
2638 ret = __bond_3ad_get_active_agg_info(bond, ad_info);
2639 rcu_read_unlock();
2640
2641 return ret;
2642 }
2643
2644 int bond_3ad_lacpdu_recv(const struct sk_buff *skb, struct bonding *bond,
2645 struct slave *slave)
2646 {
2647 struct lacpdu *lacpdu, _lacpdu;
2648
2649 if (skb->protocol != PKT_TYPE_LACPDU)
2650 return RX_HANDLER_ANOTHER;
2651
2652 if (!MAC_ADDRESS_EQUAL(eth_hdr(skb)->h_dest, lacpdu_mcast_addr))
2653 return RX_HANDLER_ANOTHER;
2654
2655 lacpdu = skb_header_pointer(skb, 0, sizeof(_lacpdu), &_lacpdu);
2656 if (!lacpdu) {
2657 atomic64_inc(&SLAVE_AD_INFO(slave)->stats.lacpdu_illegal_rx);
2658 atomic64_inc(&BOND_AD_INFO(bond).stats.lacpdu_illegal_rx);
2659 return RX_HANDLER_ANOTHER;
2660 }
2661
2662 return bond_3ad_rx_indication(lacpdu, slave);
2663 }
2664
2665 /**
2666 * bond_3ad_update_lacp_rate - change the lacp rate
2667 * @bond - bonding struct
2668 *
2669 * When modify lacp_rate parameter via sysfs,
2670 * update actor_oper_port_state of each port.
2671 *
2672 * Hold bond->mode_lock,
2673 * so we can modify port->actor_oper_port_state,
2674 * no matter bond is up or down.
2675 */
2676 void bond_3ad_update_lacp_rate(struct bonding *bond)
2677 {
2678 struct port *port = NULL;
2679 struct list_head *iter;
2680 struct slave *slave;
2681 int lacp_fast;
2682
2683 lacp_fast = bond->params.lacp_fast;
2684 spin_lock_bh(&bond->mode_lock);
2685 bond_for_each_slave(bond, slave, iter) {
2686 port = &(SLAVE_AD_INFO(slave)->port);
2687 if (lacp_fast)
2688 port->actor_oper_port_state |= LACP_STATE_LACP_TIMEOUT;
2689 else
2690 port->actor_oper_port_state &= ~LACP_STATE_LACP_TIMEOUT;
2691 }
2692 spin_unlock_bh(&bond->mode_lock);
2693 }
2694
2695 size_t bond_3ad_stats_size(void)
2696 {
2697 return nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_LACPDU_RX */
2698 nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_LACPDU_TX */
2699 nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_LACPDU_UNKNOWN_RX */
2700 nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_LACPDU_ILLEGAL_RX */
2701 nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_MARKER_RX */
2702 nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_MARKER_TX */
2703 nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_MARKER_RESP_RX */
2704 nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_MARKER_RESP_TX */
2705 nla_total_size_64bit(sizeof(u64)); /* BOND_3AD_STAT_MARKER_UNKNOWN_RX */
2706 }
2707
2708 int bond_3ad_stats_fill(struct sk_buff *skb, struct bond_3ad_stats *stats)
2709 {
2710 u64 val;
2711
2712 val = atomic64_read(&stats->lacpdu_rx);
2713 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_LACPDU_RX, val,
2714 BOND_3AD_STAT_PAD))
2715 return -EMSGSIZE;
2716 val = atomic64_read(&stats->lacpdu_tx);
2717 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_LACPDU_TX, val,
2718 BOND_3AD_STAT_PAD))
2719 return -EMSGSIZE;
2720 val = atomic64_read(&stats->lacpdu_unknown_rx);
2721 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_LACPDU_UNKNOWN_RX, val,
2722 BOND_3AD_STAT_PAD))
2723 return -EMSGSIZE;
2724 val = atomic64_read(&stats->lacpdu_illegal_rx);
2725 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_LACPDU_ILLEGAL_RX, val,
2726 BOND_3AD_STAT_PAD))
2727 return -EMSGSIZE;
2728
2729 val = atomic64_read(&stats->marker_rx);
2730 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_MARKER_RX, val,
2731 BOND_3AD_STAT_PAD))
2732 return -EMSGSIZE;
2733 val = atomic64_read(&stats->marker_tx);
2734 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_MARKER_TX, val,
2735 BOND_3AD_STAT_PAD))
2736 return -EMSGSIZE;
2737 val = atomic64_read(&stats->marker_resp_rx);
2738 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_MARKER_RESP_RX, val,
2739 BOND_3AD_STAT_PAD))
2740 return -EMSGSIZE;
2741 val = atomic64_read(&stats->marker_resp_tx);
2742 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_MARKER_RESP_TX, val,
2743 BOND_3AD_STAT_PAD))
2744 return -EMSGSIZE;
2745 val = atomic64_read(&stats->marker_unknown_rx);
2746 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_MARKER_UNKNOWN_RX, val,
2747 BOND_3AD_STAT_PAD))
2748 return -EMSGSIZE;
2749
2750 return 0;
2751 }
Linux with added FPC-III support