isci: fix oem parameter validation on single controller skus
[linux/fpc-iii.git] / drivers / acpi / pci_link.c
blob4a29763b8eb454b28c59c9257c893ac0fadc5599
1 /*
2 * pci_link.c - ACPI PCI Interrupt Link Device Driver ($Revision: 34 $)
4 * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
5 * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
6 * Copyright (C) 2002 Dominik Brodowski <devel@brodo.de>
8 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or (at
13 * your option) any later version.
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
18 * General Public License for more details.
20 * You should have received a copy of the GNU General Public License along
21 * with this program; if not, write to the Free Software Foundation, Inc.,
22 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
24 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
26 * TBD:
27 * 1. Support more than one IRQ resource entry per link device (index).
28 * 2. Implement start/stop mechanism and use ACPI Bus Driver facilities
29 * for IRQ management (e.g. start()->_SRS).
32 #include <linux/syscore_ops.h>
33 #include <linux/kernel.h>
34 #include <linux/module.h>
35 #include <linux/init.h>
36 #include <linux/types.h>
37 #include <linux/spinlock.h>
38 #include <linux/pm.h>
39 #include <linux/pci.h>
40 #include <linux/mutex.h>
41 #include <linux/slab.h>
43 #include <acpi/acpi_bus.h>
44 #include <acpi/acpi_drivers.h>
46 #define PREFIX "ACPI: "
48 #define _COMPONENT ACPI_PCI_COMPONENT
49 ACPI_MODULE_NAME("pci_link");
50 #define ACPI_PCI_LINK_CLASS "pci_irq_routing"
51 #define ACPI_PCI_LINK_DEVICE_NAME "PCI Interrupt Link"
52 #define ACPI_PCI_LINK_FILE_INFO "info"
53 #define ACPI_PCI_LINK_FILE_STATUS "state"
54 #define ACPI_PCI_LINK_MAX_POSSIBLE 16
56 static int acpi_pci_link_add(struct acpi_device *device);
57 static int acpi_pci_link_remove(struct acpi_device *device, int type);
59 static const struct acpi_device_id link_device_ids[] = {
60 {"PNP0C0F", 0},
61 {"", 0},
63 MODULE_DEVICE_TABLE(acpi, link_device_ids);
65 static struct acpi_driver acpi_pci_link_driver = {
66 .name = "pci_link",
67 .class = ACPI_PCI_LINK_CLASS,
68 .ids = link_device_ids,
69 .ops = {
70 .add = acpi_pci_link_add,
71 .remove = acpi_pci_link_remove,
76 * If a link is initialized, we never change its active and initialized
77 * later even the link is disable. Instead, we just repick the active irq
79 struct acpi_pci_link_irq {
80 u8 active; /* Current IRQ */
81 u8 triggering; /* All IRQs */
82 u8 polarity; /* All IRQs */
83 u8 resource_type;
84 u8 possible_count;
85 u8 possible[ACPI_PCI_LINK_MAX_POSSIBLE];
86 u8 initialized:1;
87 u8 reserved:7;
90 struct acpi_pci_link {
91 struct list_head list;
92 struct acpi_device *device;
93 struct acpi_pci_link_irq irq;
94 int refcnt;
97 static LIST_HEAD(acpi_link_list);
98 static DEFINE_MUTEX(acpi_link_lock);
100 /* --------------------------------------------------------------------------
101 PCI Link Device Management
102 -------------------------------------------------------------------------- */
105 * set context (link) possible list from resource list
107 static acpi_status acpi_pci_link_check_possible(struct acpi_resource *resource,
108 void *context)
110 struct acpi_pci_link *link = context;
111 u32 i;
113 switch (resource->type) {
114 case ACPI_RESOURCE_TYPE_START_DEPENDENT:
115 case ACPI_RESOURCE_TYPE_END_TAG:
116 return AE_OK;
117 case ACPI_RESOURCE_TYPE_IRQ:
119 struct acpi_resource_irq *p = &resource->data.irq;
120 if (!p || !p->interrupt_count) {
121 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
122 "Blank _PRS IRQ resource\n"));
123 return AE_OK;
125 for (i = 0;
126 (i < p->interrupt_count
127 && i < ACPI_PCI_LINK_MAX_POSSIBLE); i++) {
128 if (!p->interrupts[i]) {
129 printk(KERN_WARNING PREFIX
130 "Invalid _PRS IRQ %d\n",
131 p->interrupts[i]);
132 continue;
134 link->irq.possible[i] = p->interrupts[i];
135 link->irq.possible_count++;
137 link->irq.triggering = p->triggering;
138 link->irq.polarity = p->polarity;
139 link->irq.resource_type = ACPI_RESOURCE_TYPE_IRQ;
140 break;
142 case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
144 struct acpi_resource_extended_irq *p =
145 &resource->data.extended_irq;
146 if (!p || !p->interrupt_count) {
147 printk(KERN_WARNING PREFIX
148 "Blank _PRS EXT IRQ resource\n");
149 return AE_OK;
151 for (i = 0;
152 (i < p->interrupt_count
153 && i < ACPI_PCI_LINK_MAX_POSSIBLE); i++) {
154 if (!p->interrupts[i]) {
155 printk(KERN_WARNING PREFIX
156 "Invalid _PRS IRQ %d\n",
157 p->interrupts[i]);
158 continue;
160 link->irq.possible[i] = p->interrupts[i];
161 link->irq.possible_count++;
163 link->irq.triggering = p->triggering;
164 link->irq.polarity = p->polarity;
165 link->irq.resource_type = ACPI_RESOURCE_TYPE_EXTENDED_IRQ;
166 break;
168 default:
169 printk(KERN_ERR PREFIX "_PRS resource type 0x%x isn't an IRQ\n",
170 resource->type);
171 return AE_OK;
174 return AE_CTRL_TERMINATE;
177 static int acpi_pci_link_get_possible(struct acpi_pci_link *link)
179 acpi_status status;
181 status = acpi_walk_resources(link->device->handle, METHOD_NAME__PRS,
182 acpi_pci_link_check_possible, link);
183 if (ACPI_FAILURE(status)) {
184 ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRS"));
185 return -ENODEV;
188 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
189 "Found %d possible IRQs\n",
190 link->irq.possible_count));
192 return 0;
195 static acpi_status acpi_pci_link_check_current(struct acpi_resource *resource,
196 void *context)
198 int *irq = context;
200 switch (resource->type) {
201 case ACPI_RESOURCE_TYPE_START_DEPENDENT:
202 case ACPI_RESOURCE_TYPE_END_TAG:
203 return AE_OK;
204 case ACPI_RESOURCE_TYPE_IRQ:
206 struct acpi_resource_irq *p = &resource->data.irq;
207 if (!p || !p->interrupt_count) {
209 * IRQ descriptors may have no IRQ# bits set,
210 * particularly those those w/ _STA disabled
212 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
213 "Blank _CRS IRQ resource\n"));
214 return AE_OK;
216 *irq = p->interrupts[0];
217 break;
219 case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
221 struct acpi_resource_extended_irq *p =
222 &resource->data.extended_irq;
223 if (!p || !p->interrupt_count) {
225 * extended IRQ descriptors must
226 * return at least 1 IRQ
228 printk(KERN_WARNING PREFIX
229 "Blank _CRS EXT IRQ resource\n");
230 return AE_OK;
232 *irq = p->interrupts[0];
233 break;
235 break;
236 default:
237 printk(KERN_ERR PREFIX "_CRS resource type 0x%x isn't an IRQ\n",
238 resource->type);
239 return AE_OK;
242 return AE_CTRL_TERMINATE;
246 * Run _CRS and set link->irq.active
248 * return value:
249 * 0 - success
250 * !0 - failure
252 static int acpi_pci_link_get_current(struct acpi_pci_link *link)
254 int result = 0;
255 acpi_status status;
256 int irq = 0;
258 link->irq.active = 0;
260 /* in practice, status disabled is meaningless, ignore it */
261 if (acpi_strict) {
262 /* Query _STA, set link->device->status */
263 result = acpi_bus_get_status(link->device);
264 if (result) {
265 printk(KERN_ERR PREFIX "Unable to read status\n");
266 goto end;
269 if (!link->device->status.enabled) {
270 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Link disabled\n"));
271 return 0;
276 * Query and parse _CRS to get the current IRQ assignment.
279 status = acpi_walk_resources(link->device->handle, METHOD_NAME__CRS,
280 acpi_pci_link_check_current, &irq);
281 if (ACPI_FAILURE(status)) {
282 ACPI_EXCEPTION((AE_INFO, status, "Evaluating _CRS"));
283 result = -ENODEV;
284 goto end;
287 if (acpi_strict && !irq) {
288 printk(KERN_ERR PREFIX "_CRS returned 0\n");
289 result = -ENODEV;
292 link->irq.active = irq;
294 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Link at IRQ %d \n", link->irq.active));
296 end:
297 return result;
300 static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
302 int result;
303 acpi_status status;
304 struct {
305 struct acpi_resource res;
306 struct acpi_resource end;
307 } *resource;
308 struct acpi_buffer buffer = { 0, NULL };
310 if (!irq)
311 return -EINVAL;
313 resource = kzalloc(sizeof(*resource) + 1, irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
314 if (!resource)
315 return -ENOMEM;
317 buffer.length = sizeof(*resource) + 1;
318 buffer.pointer = resource;
320 switch (link->irq.resource_type) {
321 case ACPI_RESOURCE_TYPE_IRQ:
322 resource->res.type = ACPI_RESOURCE_TYPE_IRQ;
323 resource->res.length = sizeof(struct acpi_resource);
324 resource->res.data.irq.triggering = link->irq.triggering;
325 resource->res.data.irq.polarity =
326 link->irq.polarity;
327 if (link->irq.triggering == ACPI_EDGE_SENSITIVE)
328 resource->res.data.irq.sharable =
329 ACPI_EXCLUSIVE;
330 else
331 resource->res.data.irq.sharable = ACPI_SHARED;
332 resource->res.data.irq.interrupt_count = 1;
333 resource->res.data.irq.interrupts[0] = irq;
334 break;
336 case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
337 resource->res.type = ACPI_RESOURCE_TYPE_EXTENDED_IRQ;
338 resource->res.length = sizeof(struct acpi_resource);
339 resource->res.data.extended_irq.producer_consumer =
340 ACPI_CONSUMER;
341 resource->res.data.extended_irq.triggering =
342 link->irq.triggering;
343 resource->res.data.extended_irq.polarity =
344 link->irq.polarity;
345 if (link->irq.triggering == ACPI_EDGE_SENSITIVE)
346 resource->res.data.irq.sharable =
347 ACPI_EXCLUSIVE;
348 else
349 resource->res.data.irq.sharable = ACPI_SHARED;
350 resource->res.data.extended_irq.interrupt_count = 1;
351 resource->res.data.extended_irq.interrupts[0] = irq;
352 /* ignore resource_source, it's optional */
353 break;
354 default:
355 printk(KERN_ERR PREFIX "Invalid Resource_type %d\n", link->irq.resource_type);
356 result = -EINVAL;
357 goto end;
360 resource->end.type = ACPI_RESOURCE_TYPE_END_TAG;
362 /* Attempt to set the resource */
363 status = acpi_set_current_resources(link->device->handle, &buffer);
365 /* check for total failure */
366 if (ACPI_FAILURE(status)) {
367 ACPI_EXCEPTION((AE_INFO, status, "Evaluating _SRS"));
368 result = -ENODEV;
369 goto end;
372 /* Query _STA, set device->status */
373 result = acpi_bus_get_status(link->device);
374 if (result) {
375 printk(KERN_ERR PREFIX "Unable to read status\n");
376 goto end;
378 if (!link->device->status.enabled) {
379 printk(KERN_WARNING PREFIX
380 "%s [%s] disabled and referenced, BIOS bug\n",
381 acpi_device_name(link->device),
382 acpi_device_bid(link->device));
385 /* Query _CRS, set link->irq.active */
386 result = acpi_pci_link_get_current(link);
387 if (result) {
388 goto end;
392 * Is current setting not what we set?
393 * set link->irq.active
395 if (link->irq.active != irq) {
397 * policy: when _CRS doesn't return what we just _SRS
398 * assume _SRS worked and override _CRS value.
400 printk(KERN_WARNING PREFIX
401 "%s [%s] BIOS reported IRQ %d, using IRQ %d\n",
402 acpi_device_name(link->device),
403 acpi_device_bid(link->device), link->irq.active, irq);
404 link->irq.active = irq;
407 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Set IRQ %d\n", link->irq.active));
409 end:
410 kfree(resource);
411 return result;
414 /* --------------------------------------------------------------------------
415 PCI Link IRQ Management
416 -------------------------------------------------------------------------- */
419 * "acpi_irq_balance" (default in APIC mode) enables ACPI to use PIC Interrupt
420 * Link Devices to move the PIRQs around to minimize sharing.
422 * "acpi_irq_nobalance" (default in PIC mode) tells ACPI not to move any PIC IRQs
423 * that the BIOS has already set to active. This is necessary because
424 * ACPI has no automatic means of knowing what ISA IRQs are used. Note that
425 * if the BIOS doesn't set a Link Device active, ACPI needs to program it
426 * even if acpi_irq_nobalance is set.
428 * A tables of penalties avoids directing PCI interrupts to well known
429 * ISA IRQs. Boot params are available to over-ride the default table:
431 * List interrupts that are free for PCI use.
432 * acpi_irq_pci=n[,m]
434 * List interrupts that should not be used for PCI:
435 * acpi_irq_isa=n[,m]
437 * Note that PCI IRQ routers have a list of possible IRQs,
438 * which may not include the IRQs this table says are available.
440 * Since this heuristic can't tell the difference between a link
441 * that no device will attach to, vs. a link which may be shared
442 * by multiple active devices -- it is not optimal.
444 * If interrupt performance is that important, get an IO-APIC system
445 * with a pin dedicated to each device. Or for that matter, an MSI
446 * enabled system.
449 #define ACPI_MAX_IRQS 256
450 #define ACPI_MAX_ISA_IRQ 16
452 #define PIRQ_PENALTY_PCI_AVAILABLE (0)
453 #define PIRQ_PENALTY_PCI_POSSIBLE (16*16)
454 #define PIRQ_PENALTY_PCI_USING (16*16*16)
455 #define PIRQ_PENALTY_ISA_TYPICAL (16*16*16*16)
456 #define PIRQ_PENALTY_ISA_USED (16*16*16*16*16)
457 #define PIRQ_PENALTY_ISA_ALWAYS (16*16*16*16*16*16)
459 static int acpi_irq_penalty[ACPI_MAX_IRQS] = {
460 PIRQ_PENALTY_ISA_ALWAYS, /* IRQ0 timer */
461 PIRQ_PENALTY_ISA_ALWAYS, /* IRQ1 keyboard */
462 PIRQ_PENALTY_ISA_ALWAYS, /* IRQ2 cascade */
463 PIRQ_PENALTY_ISA_TYPICAL, /* IRQ3 serial */
464 PIRQ_PENALTY_ISA_TYPICAL, /* IRQ4 serial */
465 PIRQ_PENALTY_ISA_TYPICAL, /* IRQ5 sometimes SoundBlaster */
466 PIRQ_PENALTY_ISA_TYPICAL, /* IRQ6 */
467 PIRQ_PENALTY_ISA_TYPICAL, /* IRQ7 parallel, spurious */
468 PIRQ_PENALTY_ISA_TYPICAL, /* IRQ8 rtc, sometimes */
469 PIRQ_PENALTY_PCI_AVAILABLE, /* IRQ9 PCI, often acpi */
470 PIRQ_PENALTY_PCI_AVAILABLE, /* IRQ10 PCI */
471 PIRQ_PENALTY_PCI_AVAILABLE, /* IRQ11 PCI */
472 PIRQ_PENALTY_ISA_USED, /* IRQ12 mouse */
473 PIRQ_PENALTY_ISA_USED, /* IRQ13 fpe, sometimes */
474 PIRQ_PENALTY_ISA_USED, /* IRQ14 ide0 */
475 PIRQ_PENALTY_ISA_USED, /* IRQ15 ide1 */
476 /* >IRQ15 */
479 int __init acpi_irq_penalty_init(void)
481 struct acpi_pci_link *link;
482 int i;
485 * Update penalties to facilitate IRQ balancing.
487 list_for_each_entry(link, &acpi_link_list, list) {
490 * reflect the possible and active irqs in the penalty table --
491 * useful for breaking ties.
493 if (link->irq.possible_count) {
494 int penalty =
495 PIRQ_PENALTY_PCI_POSSIBLE /
496 link->irq.possible_count;
498 for (i = 0; i < link->irq.possible_count; i++) {
499 if (link->irq.possible[i] < ACPI_MAX_ISA_IRQ)
500 acpi_irq_penalty[link->irq.
501 possible[i]] +=
502 penalty;
505 } else if (link->irq.active) {
506 acpi_irq_penalty[link->irq.active] +=
507 PIRQ_PENALTY_PCI_POSSIBLE;
510 /* Add a penalty for the SCI */
511 acpi_irq_penalty[acpi_gbl_FADT.sci_interrupt] += PIRQ_PENALTY_PCI_USING;
512 return 0;
515 static int acpi_irq_balance = -1; /* 0: static, 1: balance */
517 static int acpi_pci_link_allocate(struct acpi_pci_link *link)
519 int irq;
520 int i;
522 if (link->irq.initialized) {
523 if (link->refcnt == 0)
524 /* This means the link is disabled but initialized */
525 acpi_pci_link_set(link, link->irq.active);
526 return 0;
530 * search for active IRQ in list of possible IRQs.
532 for (i = 0; i < link->irq.possible_count; ++i) {
533 if (link->irq.active == link->irq.possible[i])
534 break;
537 * forget active IRQ that is not in possible list
539 if (i == link->irq.possible_count) {
540 if (acpi_strict)
541 printk(KERN_WARNING PREFIX "_CRS %d not found"
542 " in _PRS\n", link->irq.active);
543 link->irq.active = 0;
547 * if active found, use it; else pick entry from end of possible list.
549 if (link->irq.active)
550 irq = link->irq.active;
551 else
552 irq = link->irq.possible[link->irq.possible_count - 1];
554 if (acpi_irq_balance || !link->irq.active) {
556 * Select the best IRQ. This is done in reverse to promote
557 * the use of IRQs 9, 10, 11, and >15.
559 for (i = (link->irq.possible_count - 1); i >= 0; i--) {
560 if (acpi_irq_penalty[irq] >
561 acpi_irq_penalty[link->irq.possible[i]])
562 irq = link->irq.possible[i];
566 /* Attempt to enable the link device at this IRQ. */
567 if (acpi_pci_link_set(link, irq)) {
568 printk(KERN_ERR PREFIX "Unable to set IRQ for %s [%s]. "
569 "Try pci=noacpi or acpi=off\n",
570 acpi_device_name(link->device),
571 acpi_device_bid(link->device));
572 return -ENODEV;
573 } else {
574 acpi_irq_penalty[link->irq.active] += PIRQ_PENALTY_PCI_USING;
575 printk(KERN_WARNING PREFIX "%s [%s] enabled at IRQ %d\n",
576 acpi_device_name(link->device),
577 acpi_device_bid(link->device), link->irq.active);
580 link->irq.initialized = 1;
581 return 0;
585 * acpi_pci_link_allocate_irq
586 * success: return IRQ >= 0
587 * failure: return -1
589 int acpi_pci_link_allocate_irq(acpi_handle handle, int index, int *triggering,
590 int *polarity, char **name)
592 int result;
593 struct acpi_device *device;
594 struct acpi_pci_link *link;
596 result = acpi_bus_get_device(handle, &device);
597 if (result) {
598 printk(KERN_ERR PREFIX "Invalid link device\n");
599 return -1;
602 link = acpi_driver_data(device);
603 if (!link) {
604 printk(KERN_ERR PREFIX "Invalid link context\n");
605 return -1;
608 /* TBD: Support multiple index (IRQ) entries per Link Device */
609 if (index) {
610 printk(KERN_ERR PREFIX "Invalid index %d\n", index);
611 return -1;
614 mutex_lock(&acpi_link_lock);
615 if (acpi_pci_link_allocate(link)) {
616 mutex_unlock(&acpi_link_lock);
617 return -1;
620 if (!link->irq.active) {
621 mutex_unlock(&acpi_link_lock);
622 printk(KERN_ERR PREFIX "Link active IRQ is 0!\n");
623 return -1;
625 link->refcnt++;
626 mutex_unlock(&acpi_link_lock);
628 if (triggering)
629 *triggering = link->irq.triggering;
630 if (polarity)
631 *polarity = link->irq.polarity;
632 if (name)
633 *name = acpi_device_bid(link->device);
634 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
635 "Link %s is referenced\n",
636 acpi_device_bid(link->device)));
637 return (link->irq.active);
641 * We don't change link's irq information here. After it is reenabled, we
642 * continue use the info
644 int acpi_pci_link_free_irq(acpi_handle handle)
646 struct acpi_device *device;
647 struct acpi_pci_link *link;
648 acpi_status result;
650 result = acpi_bus_get_device(handle, &device);
651 if (result) {
652 printk(KERN_ERR PREFIX "Invalid link device\n");
653 return -1;
656 link = acpi_driver_data(device);
657 if (!link) {
658 printk(KERN_ERR PREFIX "Invalid link context\n");
659 return -1;
662 mutex_lock(&acpi_link_lock);
663 if (!link->irq.initialized) {
664 mutex_unlock(&acpi_link_lock);
665 printk(KERN_ERR PREFIX "Link isn't initialized\n");
666 return -1;
668 #ifdef FUTURE_USE
670 * The Link reference count allows us to _DISable an unused link
671 * and suspend time, and set it again on resume.
672 * However, 2.6.12 still has irq_router.resume
673 * which blindly restores the link state.
674 * So we disable the reference count method
675 * to prevent duplicate acpi_pci_link_set()
676 * which would harm some systems
678 link->refcnt--;
679 #endif
680 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
681 "Link %s is dereferenced\n",
682 acpi_device_bid(link->device)));
684 if (link->refcnt == 0)
685 acpi_evaluate_object(link->device->handle, "_DIS", NULL, NULL);
687 mutex_unlock(&acpi_link_lock);
688 return (link->irq.active);
691 /* --------------------------------------------------------------------------
692 Driver Interface
693 -------------------------------------------------------------------------- */
695 static int acpi_pci_link_add(struct acpi_device *device)
697 int result;
698 struct acpi_pci_link *link;
699 int i;
700 int found = 0;
702 link = kzalloc(sizeof(struct acpi_pci_link), GFP_KERNEL);
703 if (!link)
704 return -ENOMEM;
706 link->device = device;
707 strcpy(acpi_device_name(device), ACPI_PCI_LINK_DEVICE_NAME);
708 strcpy(acpi_device_class(device), ACPI_PCI_LINK_CLASS);
709 device->driver_data = link;
711 mutex_lock(&acpi_link_lock);
712 result = acpi_pci_link_get_possible(link);
713 if (result)
714 goto end;
716 /* query and set link->irq.active */
717 acpi_pci_link_get_current(link);
719 printk(KERN_INFO PREFIX "%s [%s] (IRQs", acpi_device_name(device),
720 acpi_device_bid(device));
721 for (i = 0; i < link->irq.possible_count; i++) {
722 if (link->irq.active == link->irq.possible[i]) {
723 printk(" *%d", link->irq.possible[i]);
724 found = 1;
725 } else
726 printk(" %d", link->irq.possible[i]);
729 printk(")");
731 if (!found)
732 printk(" *%d", link->irq.active);
734 if (!link->device->status.enabled)
735 printk(", disabled.");
737 printk("\n");
739 list_add_tail(&link->list, &acpi_link_list);
741 end:
742 /* disable all links -- to be activated on use */
743 acpi_evaluate_object(device->handle, "_DIS", NULL, NULL);
744 mutex_unlock(&acpi_link_lock);
746 if (result)
747 kfree(link);
749 return result;
752 static int acpi_pci_link_resume(struct acpi_pci_link *link)
754 if (link->refcnt && link->irq.active && link->irq.initialized)
755 return (acpi_pci_link_set(link, link->irq.active));
757 return 0;
760 static void irqrouter_resume(void)
762 struct acpi_pci_link *link;
764 list_for_each_entry(link, &acpi_link_list, list) {
765 acpi_pci_link_resume(link);
769 static int acpi_pci_link_remove(struct acpi_device *device, int type)
771 struct acpi_pci_link *link;
773 link = acpi_driver_data(device);
775 mutex_lock(&acpi_link_lock);
776 list_del(&link->list);
777 mutex_unlock(&acpi_link_lock);
779 kfree(link);
780 return 0;
784 * modify acpi_irq_penalty[] from cmdline
786 static int __init acpi_irq_penalty_update(char *str, int used)
788 int i;
790 for (i = 0; i < 16; i++) {
791 int retval;
792 int irq;
794 retval = get_option(&str, &irq);
796 if (!retval)
797 break; /* no number found */
799 if (irq < 0)
800 continue;
802 if (irq >= ARRAY_SIZE(acpi_irq_penalty))
803 continue;
805 if (used)
806 acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED;
807 else
808 acpi_irq_penalty[irq] = PIRQ_PENALTY_PCI_AVAILABLE;
810 if (retval != 2) /* no next number */
811 break;
813 return 1;
817 * We'd like PNP to call this routine for the
818 * single ISA_USED value for each legacy device.
819 * But instead it calls us with each POSSIBLE setting.
820 * There is no ISA_POSSIBLE weight, so we simply use
821 * the (small) PCI_USING penalty.
823 void acpi_penalize_isa_irq(int irq, int active)
825 if (irq >= 0 && irq < ARRAY_SIZE(acpi_irq_penalty)) {
826 if (active)
827 acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED;
828 else
829 acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING;
834 * Over-ride default table to reserve additional IRQs for use by ISA
835 * e.g. acpi_irq_isa=5
836 * Useful for telling ACPI how not to interfere with your ISA sound card.
838 static int __init acpi_irq_isa(char *str)
840 return acpi_irq_penalty_update(str, 1);
843 __setup("acpi_irq_isa=", acpi_irq_isa);
846 * Over-ride default table to free additional IRQs for use by PCI
847 * e.g. acpi_irq_pci=7,15
848 * Used for acpi_irq_balance to free up IRQs to reduce PCI IRQ sharing.
850 static int __init acpi_irq_pci(char *str)
852 return acpi_irq_penalty_update(str, 0);
855 __setup("acpi_irq_pci=", acpi_irq_pci);
857 static int __init acpi_irq_nobalance_set(char *str)
859 acpi_irq_balance = 0;
860 return 1;
863 __setup("acpi_irq_nobalance", acpi_irq_nobalance_set);
865 static int __init acpi_irq_balance_set(char *str)
867 acpi_irq_balance = 1;
868 return 1;
871 __setup("acpi_irq_balance", acpi_irq_balance_set);
873 static struct syscore_ops irqrouter_syscore_ops = {
874 .resume = irqrouter_resume,
877 static int __init irqrouter_init_ops(void)
879 if (!acpi_disabled && !acpi_noirq)
880 register_syscore_ops(&irqrouter_syscore_ops);
882 return 0;
885 device_initcall(irqrouter_init_ops);
887 static int __init acpi_pci_link_init(void)
889 if (acpi_noirq)
890 return 0;
892 if (acpi_irq_balance == -1) {
893 /* no command line switch: enable balancing in IOAPIC mode */
894 if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
895 acpi_irq_balance = 1;
896 else
897 acpi_irq_balance = 0;
900 if (acpi_bus_register_driver(&acpi_pci_link_driver) < 0)
901 return -ENODEV;
903 return 0;
906 subsys_initcall(acpi_pci_link_init);