Merge tag 'riscv-for-linus-4.15-rc2_cleanups' of git://git.kernel.org/pub/scm/linux...
[linux/fpc-iii.git] / drivers / soc / bcm / brcmstb / pm / aon_defs.h
blobfb936abd847dbdc6fbb92c874330c52e25c7a748
1 /*
2 * Always ON (AON) register interface between bootloader and Linux
4 * Copyright © 2014-2017 Broadcom
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
16 #ifndef __BRCMSTB_AON_DEFS_H__
17 #define __BRCMSTB_AON_DEFS_H__
19 #include <linux/compiler.h>
21 /* Magic number in upper 16-bits */
22 #define BRCMSTB_S3_MAGIC_MASK 0xffff0000
23 #define BRCMSTB_S3_MAGIC_SHORT 0x5AFE0000
25 enum {
26 /* Restore random key for AES memory verification (off = fixed key) */
27 S3_FLAG_LOAD_RANDKEY = (1 << 0),
29 /* Scratch buffer page table is present */
30 S3_FLAG_SCRATCH_BUFFER_TABLE = (1 << 1),
32 /* Skip all memory verification */
33 S3_FLAG_NO_MEM_VERIFY = (1 << 2),
36 * Modification of this bit reserved for bootloader only.
37 * 1=PSCI started Linux, 0=Direct jump to Linux.
39 S3_FLAG_PSCI_BOOT = (1 << 3),
42 * Modification of this bit reserved for bootloader only.
43 * 1=64 bit boot, 0=32 bit boot.
45 S3_FLAG_BOOTED64 = (1 << 4),
48 #define BRCMSTB_HASH_LEN (128 / 8) /* 128-bit hash */
50 #define AON_REG_MAGIC_FLAGS 0x00
51 #define AON_REG_CONTROL_LOW 0x04
52 #define AON_REG_CONTROL_HIGH 0x08
53 #define AON_REG_S3_HASH 0x0c /* hash of S3 params */
54 #define AON_REG_CONTROL_HASH_LEN 0x1c
55 #define AON_REG_PANIC 0x20
57 #define BRCMSTB_S3_MAGIC 0x5AFEB007
58 #define BRCMSTB_PANIC_MAGIC 0x512E115E
59 #define BOOTLOADER_SCRATCH_SIZE 64
60 #define BRCMSTB_DTU_STATE_MAP_ENTRIES (8*1024)
61 #define BRCMSTB_DTU_CONFIG_ENTRIES (512)
62 #define BRCMSTB_DTU_COUNT (2)
64 #define IMAGE_DESCRIPTORS_BUFSIZE (2 * 1024)
65 #define S3_BOOTLOADER_RESERVED (S3_FLAG_PSCI_BOOT | S3_FLAG_BOOTED64)
67 struct brcmstb_bootloader_dtu_table {
68 uint32_t dtu_state_map[BRCMSTB_DTU_STATE_MAP_ENTRIES];
69 uint32_t dtu_config[BRCMSTB_DTU_CONFIG_ENTRIES];
73 * Bootloader utilizes a custom parameter block left in DRAM for handling S3
74 * warm resume
76 struct brcmstb_s3_params {
77 /* scratch memory for bootloader */
78 uint8_t scratch[BOOTLOADER_SCRATCH_SIZE];
80 uint32_t magic; /* BRCMSTB_S3_MAGIC */
81 uint64_t reentry; /* PA */
83 /* descriptors */
84 uint32_t hash[BRCMSTB_HASH_LEN / 4];
87 * If 0, then ignore this parameter (there is only one set of
88 * descriptors)
90 * If non-0, then a second set of descriptors is stored at:
92 * descriptors + desc_offset_2
94 * The MAC result of both descriptors is XOR'd and stored in @hash
96 uint32_t desc_offset_2;
99 * (Physical) address of a brcmstb_bootloader_scratch_table, for
100 * providing a large DRAM buffer to the bootloader
102 uint64_t buffer_table;
104 uint32_t spare[70];
106 uint8_t descriptors[IMAGE_DESCRIPTORS_BUFSIZE];
108 * Must be last member of struct. See brcmstb_pm_s3_finish() for reason.
110 struct brcmstb_bootloader_dtu_table dtu[BRCMSTB_DTU_COUNT];
111 } __packed;
113 #endif /* __BRCMSTB_AON_DEFS_H__ */