arm64: mm: remove pointless PAGE_MASKing
[linux/fpc-iii.git] / drivers / hwmon / jc42.c
blob9887d3224a865e9aa0de33e8d38894600cc0be3b
1 /*
2 * jc42.c - driver for Jedec JC42.4 compliant temperature sensors
4 * Copyright (c) 2010 Ericsson AB.
6 * Derived from lm77.c by Andras BALI <drewie@freemail.hu>.
8 * JC42.4 compliant temperature sensors are typically used on memory modules.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/module.h>
26 #include <linux/init.h>
27 #include <linux/slab.h>
28 #include <linux/jiffies.h>
29 #include <linux/i2c.h>
30 #include <linux/hwmon.h>
31 #include <linux/hwmon-sysfs.h>
32 #include <linux/err.h>
33 #include <linux/mutex.h>
35 /* Addresses to scan */
36 static const unsigned short normal_i2c[] = {
37 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, I2C_CLIENT_END };
39 /* JC42 registers. All registers are 16 bit. */
40 #define JC42_REG_CAP 0x00
41 #define JC42_REG_CONFIG 0x01
42 #define JC42_REG_TEMP_UPPER 0x02
43 #define JC42_REG_TEMP_LOWER 0x03
44 #define JC42_REG_TEMP_CRITICAL 0x04
45 #define JC42_REG_TEMP 0x05
46 #define JC42_REG_MANID 0x06
47 #define JC42_REG_DEVICEID 0x07
49 /* Status bits in temperature register */
50 #define JC42_ALARM_CRIT_BIT 15
51 #define JC42_ALARM_MAX_BIT 14
52 #define JC42_ALARM_MIN_BIT 13
54 /* Configuration register defines */
55 #define JC42_CFG_CRIT_ONLY (1 << 2)
56 #define JC42_CFG_TCRIT_LOCK (1 << 6)
57 #define JC42_CFG_EVENT_LOCK (1 << 7)
58 #define JC42_CFG_SHUTDOWN (1 << 8)
59 #define JC42_CFG_HYST_SHIFT 9
60 #define JC42_CFG_HYST_MASK (0x03 << 9)
62 /* Capabilities */
63 #define JC42_CAP_RANGE (1 << 2)
65 /* Manufacturer IDs */
66 #define ADT_MANID 0x11d4 /* Analog Devices */
67 #define ATMEL_MANID 0x001f /* Atmel */
68 #define ATMEL_MANID2 0x1114 /* Atmel */
69 #define MAX_MANID 0x004d /* Maxim */
70 #define IDT_MANID 0x00b3 /* IDT */
71 #define MCP_MANID 0x0054 /* Microchip */
72 #define NXP_MANID 0x1131 /* NXP Semiconductors */
73 #define ONS_MANID 0x1b09 /* ON Semiconductor */
74 #define STM_MANID 0x104a /* ST Microelectronics */
76 /* Supported chips */
78 /* Analog Devices */
79 #define ADT7408_DEVID 0x0801
80 #define ADT7408_DEVID_MASK 0xffff
82 /* Atmel */
83 #define AT30TS00_DEVID 0x8201
84 #define AT30TS00_DEVID_MASK 0xffff
86 #define AT30TSE004_DEVID 0x2200
87 #define AT30TSE004_DEVID_MASK 0xffff
89 /* IDT */
90 #define TSE2004_DEVID 0x2200
91 #define TSE2004_DEVID_MASK 0xff00
93 #define TS3000_DEVID 0x2900 /* Also matches TSE2002 */
94 #define TS3000_DEVID_MASK 0xff00
96 #define TS3001_DEVID 0x3000
97 #define TS3001_DEVID_MASK 0xff00
99 /* Maxim */
100 #define MAX6604_DEVID 0x3e00
101 #define MAX6604_DEVID_MASK 0xffff
103 /* Microchip */
104 #define MCP9804_DEVID 0x0200
105 #define MCP9804_DEVID_MASK 0xfffc
107 #define MCP98242_DEVID 0x2000
108 #define MCP98242_DEVID_MASK 0xfffc
110 #define MCP98243_DEVID 0x2100
111 #define MCP98243_DEVID_MASK 0xfffc
113 #define MCP98244_DEVID 0x2200
114 #define MCP98244_DEVID_MASK 0xfffc
116 #define MCP9843_DEVID 0x0000 /* Also matches mcp9805 */
117 #define MCP9843_DEVID_MASK 0xfffe
119 /* NXP */
120 #define SE97_DEVID 0xa200
121 #define SE97_DEVID_MASK 0xfffc
123 #define SE98_DEVID 0xa100
124 #define SE98_DEVID_MASK 0xfffc
126 /* ON Semiconductor */
127 #define CAT6095_DEVID 0x0800 /* Also matches CAT34TS02 */
128 #define CAT6095_DEVID_MASK 0xffe0
130 /* ST Microelectronics */
131 #define STTS424_DEVID 0x0101
132 #define STTS424_DEVID_MASK 0xffff
134 #define STTS424E_DEVID 0x0000
135 #define STTS424E_DEVID_MASK 0xfffe
137 #define STTS2002_DEVID 0x0300
138 #define STTS2002_DEVID_MASK 0xffff
140 #define STTS2004_DEVID 0x2201
141 #define STTS2004_DEVID_MASK 0xffff
143 #define STTS3000_DEVID 0x0200
144 #define STTS3000_DEVID_MASK 0xffff
146 static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 };
148 struct jc42_chips {
149 u16 manid;
150 u16 devid;
151 u16 devid_mask;
154 static struct jc42_chips jc42_chips[] = {
155 { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
156 { ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK },
157 { ATMEL_MANID2, AT30TSE004_DEVID, AT30TSE004_DEVID_MASK },
158 { IDT_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK },
159 { IDT_MANID, TS3000_DEVID, TS3000_DEVID_MASK },
160 { IDT_MANID, TS3001_DEVID, TS3001_DEVID_MASK },
161 { MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
162 { MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK },
163 { MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
164 { MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
165 { MCP_MANID, MCP98244_DEVID, MCP98244_DEVID_MASK },
166 { MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK },
167 { NXP_MANID, SE97_DEVID, SE97_DEVID_MASK },
168 { ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK },
169 { NXP_MANID, SE98_DEVID, SE98_DEVID_MASK },
170 { STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK },
171 { STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK },
172 { STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK },
173 { STM_MANID, STTS2004_DEVID, STTS2004_DEVID_MASK },
174 { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK },
177 enum temp_index {
178 t_input = 0,
179 t_crit,
180 t_min,
181 t_max,
182 t_num_temp
185 static const u8 temp_regs[t_num_temp] = {
186 [t_input] = JC42_REG_TEMP,
187 [t_crit] = JC42_REG_TEMP_CRITICAL,
188 [t_min] = JC42_REG_TEMP_LOWER,
189 [t_max] = JC42_REG_TEMP_UPPER,
192 /* Each client has this additional data */
193 struct jc42_data {
194 struct i2c_client *client;
195 struct mutex update_lock; /* protect register access */
196 bool extended; /* true if extended range supported */
197 bool valid;
198 unsigned long last_updated; /* In jiffies */
199 u16 orig_config; /* original configuration */
200 u16 config; /* current configuration */
201 u16 temp[t_num_temp];/* Temperatures */
204 #define JC42_TEMP_MIN_EXTENDED (-40000)
205 #define JC42_TEMP_MIN 0
206 #define JC42_TEMP_MAX 125000
208 static u16 jc42_temp_to_reg(long temp, bool extended)
210 int ntemp = clamp_val(temp,
211 extended ? JC42_TEMP_MIN_EXTENDED :
212 JC42_TEMP_MIN, JC42_TEMP_MAX);
214 /* convert from 0.001 to 0.0625 resolution */
215 return (ntemp * 2 / 125) & 0x1fff;
218 static int jc42_temp_from_reg(s16 reg)
220 reg = sign_extend32(reg, 12);
222 /* convert from 0.0625 to 0.001 resolution */
223 return reg * 125 / 2;
226 static struct jc42_data *jc42_update_device(struct device *dev)
228 struct jc42_data *data = dev_get_drvdata(dev);
229 struct i2c_client *client = data->client;
230 struct jc42_data *ret = data;
231 int i, val;
233 mutex_lock(&data->update_lock);
235 if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
236 for (i = 0; i < t_num_temp; i++) {
237 val = i2c_smbus_read_word_swapped(client, temp_regs[i]);
238 if (val < 0) {
239 ret = ERR_PTR(val);
240 goto abort;
242 data->temp[i] = val;
244 data->last_updated = jiffies;
245 data->valid = true;
247 abort:
248 mutex_unlock(&data->update_lock);
249 return ret;
252 /* sysfs functions */
254 static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
255 char *buf)
257 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
258 struct jc42_data *data = jc42_update_device(dev);
259 if (IS_ERR(data))
260 return PTR_ERR(data);
261 return sprintf(buf, "%d\n",
262 jc42_temp_from_reg(data->temp[attr->index]));
265 static ssize_t show_temp_hyst(struct device *dev,
266 struct device_attribute *devattr, char *buf)
268 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
269 struct jc42_data *data = jc42_update_device(dev);
270 int temp, hyst;
272 if (IS_ERR(data))
273 return PTR_ERR(data);
275 temp = jc42_temp_from_reg(data->temp[attr->index]);
276 hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
277 >> JC42_CFG_HYST_SHIFT];
278 return sprintf(buf, "%d\n", temp - hyst);
281 static ssize_t set_temp(struct device *dev, struct device_attribute *devattr,
282 const char *buf, size_t count)
284 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
285 struct jc42_data *data = dev_get_drvdata(dev);
286 int err, ret = count;
287 int nr = attr->index;
288 long val;
290 if (kstrtol(buf, 10, &val) < 0)
291 return -EINVAL;
292 mutex_lock(&data->update_lock);
293 data->temp[nr] = jc42_temp_to_reg(val, data->extended);
294 err = i2c_smbus_write_word_swapped(data->client, temp_regs[nr],
295 data->temp[nr]);
296 if (err < 0)
297 ret = err;
298 mutex_unlock(&data->update_lock);
299 return ret;
303 * JC42.4 compliant chips only support four hysteresis values.
304 * Pick best choice and go from there.
306 static ssize_t set_temp_crit_hyst(struct device *dev,
307 struct device_attribute *attr,
308 const char *buf, size_t count)
310 struct jc42_data *data = dev_get_drvdata(dev);
311 long val;
312 int diff, hyst;
313 int err;
314 int ret = count;
316 if (kstrtol(buf, 10, &val) < 0)
317 return -EINVAL;
319 val = clamp_val(val, (data->extended ? JC42_TEMP_MIN_EXTENDED :
320 JC42_TEMP_MIN) - 6000, JC42_TEMP_MAX);
321 diff = jc42_temp_from_reg(data->temp[t_crit]) - val;
323 hyst = 0;
324 if (diff > 0) {
325 if (diff < 2250)
326 hyst = 1; /* 1.5 degrees C */
327 else if (diff < 4500)
328 hyst = 2; /* 3.0 degrees C */
329 else
330 hyst = 3; /* 6.0 degrees C */
333 mutex_lock(&data->update_lock);
334 data->config = (data->config & ~JC42_CFG_HYST_MASK)
335 | (hyst << JC42_CFG_HYST_SHIFT);
336 err = i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
337 data->config);
338 if (err < 0)
339 ret = err;
340 mutex_unlock(&data->update_lock);
341 return ret;
344 static ssize_t show_alarm(struct device *dev,
345 struct device_attribute *attr, char *buf)
347 u16 bit = to_sensor_dev_attr(attr)->index;
348 struct jc42_data *data = jc42_update_device(dev);
349 u16 val;
351 if (IS_ERR(data))
352 return PTR_ERR(data);
354 val = data->temp[t_input];
355 if (bit != JC42_ALARM_CRIT_BIT && (data->config & JC42_CFG_CRIT_ONLY))
356 val = 0;
357 return sprintf(buf, "%u\n", (val >> bit) & 1);
360 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, t_input);
361 static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, set_temp, t_crit);
362 static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp, set_temp, t_min);
363 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, set_temp, t_max);
365 static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_hyst,
366 set_temp_crit_hyst, t_crit);
367 static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp_hyst, NULL, t_max);
369 static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL,
370 JC42_ALARM_CRIT_BIT);
371 static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL,
372 JC42_ALARM_MIN_BIT);
373 static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL,
374 JC42_ALARM_MAX_BIT);
376 static struct attribute *jc42_attributes[] = {
377 &sensor_dev_attr_temp1_input.dev_attr.attr,
378 &sensor_dev_attr_temp1_crit.dev_attr.attr,
379 &sensor_dev_attr_temp1_min.dev_attr.attr,
380 &sensor_dev_attr_temp1_max.dev_attr.attr,
381 &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
382 &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
383 &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
384 &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
385 &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
386 NULL
389 static umode_t jc42_attribute_mode(struct kobject *kobj,
390 struct attribute *attr, int index)
392 struct device *dev = container_of(kobj, struct device, kobj);
393 struct jc42_data *data = dev_get_drvdata(dev);
394 unsigned int config = data->config;
395 bool readonly;
397 if (attr == &sensor_dev_attr_temp1_crit.dev_attr.attr)
398 readonly = config & JC42_CFG_TCRIT_LOCK;
399 else if (attr == &sensor_dev_attr_temp1_min.dev_attr.attr ||
400 attr == &sensor_dev_attr_temp1_max.dev_attr.attr)
401 readonly = config & JC42_CFG_EVENT_LOCK;
402 else if (attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr)
403 readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK);
404 else
405 readonly = true;
407 return S_IRUGO | (readonly ? 0 : S_IWUSR);
410 static const struct attribute_group jc42_group = {
411 .attrs = jc42_attributes,
412 .is_visible = jc42_attribute_mode,
414 __ATTRIBUTE_GROUPS(jc42);
416 /* Return 0 if detection is successful, -ENODEV otherwise */
417 static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info)
419 struct i2c_adapter *adapter = client->adapter;
420 int i, config, cap, manid, devid;
422 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
423 I2C_FUNC_SMBUS_WORD_DATA))
424 return -ENODEV;
426 cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP);
427 config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
428 manid = i2c_smbus_read_word_swapped(client, JC42_REG_MANID);
429 devid = i2c_smbus_read_word_swapped(client, JC42_REG_DEVICEID);
431 if (cap < 0 || config < 0 || manid < 0 || devid < 0)
432 return -ENODEV;
434 if ((cap & 0xff00) || (config & 0xf800))
435 return -ENODEV;
437 for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) {
438 struct jc42_chips *chip = &jc42_chips[i];
439 if (manid == chip->manid &&
440 (devid & chip->devid_mask) == chip->devid) {
441 strlcpy(info->type, "jc42", I2C_NAME_SIZE);
442 return 0;
445 return -ENODEV;
448 static int jc42_probe(struct i2c_client *client, const struct i2c_device_id *id)
450 struct device *dev = &client->dev;
451 struct device *hwmon_dev;
452 struct jc42_data *data;
453 int config, cap;
455 data = devm_kzalloc(dev, sizeof(struct jc42_data), GFP_KERNEL);
456 if (!data)
457 return -ENOMEM;
459 data->client = client;
460 i2c_set_clientdata(client, data);
461 mutex_init(&data->update_lock);
463 cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP);
464 if (cap < 0)
465 return cap;
467 data->extended = !!(cap & JC42_CAP_RANGE);
469 config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
470 if (config < 0)
471 return config;
473 data->orig_config = config;
474 if (config & JC42_CFG_SHUTDOWN) {
475 config &= ~JC42_CFG_SHUTDOWN;
476 i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
478 data->config = config;
480 hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
481 data,
482 jc42_groups);
483 return PTR_ERR_OR_ZERO(hwmon_dev);
486 static int jc42_remove(struct i2c_client *client)
488 struct jc42_data *data = i2c_get_clientdata(client);
490 /* Restore original configuration except hysteresis */
491 if ((data->config & ~JC42_CFG_HYST_MASK) !=
492 (data->orig_config & ~JC42_CFG_HYST_MASK)) {
493 int config;
495 config = (data->orig_config & ~JC42_CFG_HYST_MASK)
496 | (data->config & JC42_CFG_HYST_MASK);
497 i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
499 return 0;
502 #ifdef CONFIG_PM
504 static int jc42_suspend(struct device *dev)
506 struct jc42_data *data = dev_get_drvdata(dev);
508 data->config |= JC42_CFG_SHUTDOWN;
509 i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
510 data->config);
511 return 0;
514 static int jc42_resume(struct device *dev)
516 struct jc42_data *data = dev_get_drvdata(dev);
518 data->config &= ~JC42_CFG_SHUTDOWN;
519 i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
520 data->config);
521 return 0;
524 static const struct dev_pm_ops jc42_dev_pm_ops = {
525 .suspend = jc42_suspend,
526 .resume = jc42_resume,
529 #define JC42_DEV_PM_OPS (&jc42_dev_pm_ops)
530 #else
531 #define JC42_DEV_PM_OPS NULL
532 #endif /* CONFIG_PM */
534 static const struct i2c_device_id jc42_id[] = {
535 { "jc42", 0 },
538 MODULE_DEVICE_TABLE(i2c, jc42_id);
540 static struct i2c_driver jc42_driver = {
541 .class = I2C_CLASS_SPD,
542 .driver = {
543 .name = "jc42",
544 .pm = JC42_DEV_PM_OPS,
546 .probe = jc42_probe,
547 .remove = jc42_remove,
548 .id_table = jc42_id,
549 .detect = jc42_detect,
550 .address_list = normal_i2c,
553 module_i2c_driver(jc42_driver);
555 MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
556 MODULE_DESCRIPTION("JC42 driver");
557 MODULE_LICENSE("GPL");