arm64: mm: remove pointless PAGE_MASKing
[linux/fpc-iii.git] / drivers / regulator / max77686.c
blob17ccf365a9c04d9cb33a246f74777f316d76f037
1 /*
2 * max77686.c - Regulator driver for the Maxim 77686
4 * Copyright (C) 2012 Samsung Electronics
5 * Chiwoong Byun <woong.byun@samsung.com>
6 * Jonghwa Lee <jonghwa3.lee@samsung.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 * This driver is based on max8997.c
25 #include <linux/kernel.h>
26 #include <linux/bug.h>
27 #include <linux/err.h>
28 #include <linux/gpio.h>
29 #include <linux/of_gpio.h>
30 #include <linux/slab.h>
31 #include <linux/platform_device.h>
32 #include <linux/regulator/driver.h>
33 #include <linux/regulator/machine.h>
34 #include <linux/regulator/of_regulator.h>
35 #include <linux/mfd/max77686.h>
36 #include <linux/mfd/max77686-private.h>
38 #define MAX77686_LDO_MINUV 800000
39 #define MAX77686_LDO_UVSTEP 50000
40 #define MAX77686_LDO_LOW_MINUV 800000
41 #define MAX77686_LDO_LOW_UVSTEP 25000
42 #define MAX77686_BUCK_MINUV 750000
43 #define MAX77686_BUCK_UVSTEP 50000
44 #define MAX77686_RAMP_DELAY 100000 /* uV/us */
45 #define MAX77686_DVS_RAMP_DELAY 27500 /* uV/us */
46 #define MAX77686_DVS_MINUV 600000
47 #define MAX77686_DVS_UVSTEP 12500
50 * Value for configuring buck[89] and LDO{20,21,22} as GPIO control.
51 * It is the same as 'off' for other regulators.
53 #define MAX77686_GPIO_CONTROL 0x0
55 * Values used for configuring LDOs and bucks.
56 * Forcing low power mode: LDO1, 3-5, 9, 13, 17-26
58 #define MAX77686_LDO_LOWPOWER 0x1
60 * On/off controlled by PWRREQ:
61 * - LDO2, 6-8, 10-12, 14-16
62 * - buck[1234]
64 #define MAX77686_OFF_PWRREQ 0x1
65 /* Low power mode controlled by PWRREQ: All LDOs */
66 #define MAX77686_LDO_LOWPOWER_PWRREQ 0x2
67 /* Forcing low power mode: buck[234] */
68 #define MAX77686_BUCK_LOWPOWER 0x2
69 #define MAX77686_NORMAL 0x3
71 #define MAX77686_OPMODE_SHIFT 6
72 #define MAX77686_OPMODE_BUCK234_SHIFT 4
73 #define MAX77686_OPMODE_MASK 0x3
75 #define MAX77686_VSEL_MASK 0x3F
76 #define MAX77686_DVS_VSEL_MASK 0xFF
78 #define MAX77686_RAMP_RATE_MASK 0xC0
80 #define MAX77686_REGULATORS MAX77686_REG_MAX
81 #define MAX77686_LDOS 26
83 enum max77686_ramp_rate {
84 RAMP_RATE_13P75MV,
85 RAMP_RATE_27P5MV,
86 RAMP_RATE_55MV,
87 RAMP_RATE_NO_CTRL, /* 100mV/us */
90 struct max77686_data {
91 DECLARE_BITMAP(gpio_enabled, MAX77686_REGULATORS);
93 /* Array indexed by regulator id */
94 unsigned int opmode[MAX77686_REGULATORS];
97 static unsigned int max77686_get_opmode_shift(int id)
99 switch (id) {
100 case MAX77686_BUCK1:
101 case MAX77686_BUCK5 ... MAX77686_BUCK9:
102 return 0;
103 case MAX77686_BUCK2 ... MAX77686_BUCK4:
104 return MAX77686_OPMODE_BUCK234_SHIFT;
105 default:
106 /* all LDOs */
107 return MAX77686_OPMODE_SHIFT;
112 * When regulator is configured for GPIO control then it
113 * replaces "normal" mode. Any change from low power mode to normal
114 * should actually change to GPIO control.
115 * Map normal mode to proper value for such regulators.
117 static unsigned int max77686_map_normal_mode(struct max77686_data *max77686,
118 int id)
120 switch (id) {
121 case MAX77686_BUCK8:
122 case MAX77686_BUCK9:
123 case MAX77686_LDO20 ... MAX77686_LDO22:
124 if (test_bit(id, max77686->gpio_enabled))
125 return MAX77686_GPIO_CONTROL;
128 return MAX77686_NORMAL;
131 /* Some BUCKs and LDOs supports Normal[ON/OFF] mode during suspend */
132 static int max77686_set_suspend_disable(struct regulator_dev *rdev)
134 unsigned int val, shift;
135 struct max77686_data *max77686 = rdev_get_drvdata(rdev);
136 int ret, id = rdev_get_id(rdev);
138 shift = max77686_get_opmode_shift(id);
139 val = MAX77686_OFF_PWRREQ;
141 ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
142 rdev->desc->enable_mask, val << shift);
143 if (ret)
144 return ret;
146 max77686->opmode[id] = val;
147 return 0;
150 /* Some LDOs supports [LPM/Normal]ON mode during suspend state */
151 static int max77686_set_suspend_mode(struct regulator_dev *rdev,
152 unsigned int mode)
154 struct max77686_data *max77686 = rdev_get_drvdata(rdev);
155 unsigned int val;
156 int ret, id = rdev_get_id(rdev);
158 /* BUCK[5-9] doesn't support this feature */
159 if (id >= MAX77686_BUCK5)
160 return 0;
162 switch (mode) {
163 case REGULATOR_MODE_IDLE: /* ON in LP Mode */
164 val = MAX77686_LDO_LOWPOWER_PWRREQ;
165 break;
166 case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
167 val = max77686_map_normal_mode(max77686, id);
168 break;
169 default:
170 pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
171 rdev->desc->name, mode);
172 return -EINVAL;
175 ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
176 rdev->desc->enable_mask,
177 val << MAX77686_OPMODE_SHIFT);
178 if (ret)
179 return ret;
181 max77686->opmode[id] = val;
182 return 0;
185 /* Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state */
186 static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev,
187 unsigned int mode)
189 unsigned int val;
190 struct max77686_data *max77686 = rdev_get_drvdata(rdev);
191 int ret, id = rdev_get_id(rdev);
193 switch (mode) {
194 case REGULATOR_MODE_STANDBY: /* switch off */
195 val = MAX77686_OFF_PWRREQ;
196 break;
197 case REGULATOR_MODE_IDLE: /* ON in LP Mode */
198 val = MAX77686_LDO_LOWPOWER_PWRREQ;
199 break;
200 case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
201 val = max77686_map_normal_mode(max77686, id);
202 break;
203 default:
204 pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
205 rdev->desc->name, mode);
206 return -EINVAL;
209 ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
210 rdev->desc->enable_mask,
211 val << MAX77686_OPMODE_SHIFT);
212 if (ret)
213 return ret;
215 max77686->opmode[id] = val;
216 return 0;
219 static int max77686_enable(struct regulator_dev *rdev)
221 struct max77686_data *max77686 = rdev_get_drvdata(rdev);
222 unsigned int shift;
223 int id = rdev_get_id(rdev);
225 shift = max77686_get_opmode_shift(id);
227 if (max77686->opmode[id] == MAX77686_OFF_PWRREQ)
228 max77686->opmode[id] = max77686_map_normal_mode(max77686, id);
230 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
231 rdev->desc->enable_mask,
232 max77686->opmode[id] << shift);
235 static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
237 unsigned int ramp_value = RAMP_RATE_NO_CTRL;
239 switch (ramp_delay) {
240 case 1 ... 13750:
241 ramp_value = RAMP_RATE_13P75MV;
242 break;
243 case 13751 ... 27500:
244 ramp_value = RAMP_RATE_27P5MV;
245 break;
246 case 27501 ... 55000:
247 ramp_value = RAMP_RATE_55MV;
248 break;
249 case 55001 ... 100000:
250 break;
251 default:
252 pr_warn("%s: ramp_delay: %d not supported, setting 100000\n",
253 rdev->desc->name, ramp_delay);
256 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
257 MAX77686_RAMP_RATE_MASK, ramp_value << 6);
260 static int max77686_of_parse_cb(struct device_node *np,
261 const struct regulator_desc *desc,
262 struct regulator_config *config)
264 struct max77686_data *max77686 = config->driver_data;
266 switch (desc->id) {
267 case MAX77686_BUCK8:
268 case MAX77686_BUCK9:
269 case MAX77686_LDO20 ... MAX77686_LDO22:
270 config->ena_gpio = of_get_named_gpio(np,
271 "maxim,ena-gpios", 0);
272 config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
273 config->ena_gpio_initialized = true;
274 break;
275 default:
276 return 0;
279 if (gpio_is_valid(config->ena_gpio)) {
280 set_bit(desc->id, max77686->gpio_enabled);
282 return regmap_update_bits(config->regmap, desc->enable_reg,
283 desc->enable_mask,
284 MAX77686_GPIO_CONTROL);
287 return 0;
290 static struct regulator_ops max77686_ops = {
291 .list_voltage = regulator_list_voltage_linear,
292 .map_voltage = regulator_map_voltage_linear,
293 .is_enabled = regulator_is_enabled_regmap,
294 .enable = max77686_enable,
295 .disable = regulator_disable_regmap,
296 .get_voltage_sel = regulator_get_voltage_sel_regmap,
297 .set_voltage_sel = regulator_set_voltage_sel_regmap,
298 .set_voltage_time_sel = regulator_set_voltage_time_sel,
299 .set_suspend_mode = max77686_set_suspend_mode,
302 static struct regulator_ops max77686_ldo_ops = {
303 .list_voltage = regulator_list_voltage_linear,
304 .map_voltage = regulator_map_voltage_linear,
305 .is_enabled = regulator_is_enabled_regmap,
306 .enable = max77686_enable,
307 .disable = regulator_disable_regmap,
308 .get_voltage_sel = regulator_get_voltage_sel_regmap,
309 .set_voltage_sel = regulator_set_voltage_sel_regmap,
310 .set_voltage_time_sel = regulator_set_voltage_time_sel,
311 .set_suspend_mode = max77686_ldo_set_suspend_mode,
312 .set_suspend_disable = max77686_set_suspend_disable,
315 static struct regulator_ops max77686_buck1_ops = {
316 .list_voltage = regulator_list_voltage_linear,
317 .map_voltage = regulator_map_voltage_linear,
318 .is_enabled = regulator_is_enabled_regmap,
319 .enable = max77686_enable,
320 .disable = regulator_disable_regmap,
321 .get_voltage_sel = regulator_get_voltage_sel_regmap,
322 .set_voltage_sel = regulator_set_voltage_sel_regmap,
323 .set_voltage_time_sel = regulator_set_voltage_time_sel,
324 .set_suspend_disable = max77686_set_suspend_disable,
327 static struct regulator_ops max77686_buck_dvs_ops = {
328 .list_voltage = regulator_list_voltage_linear,
329 .map_voltage = regulator_map_voltage_linear,
330 .is_enabled = regulator_is_enabled_regmap,
331 .enable = max77686_enable,
332 .disable = regulator_disable_regmap,
333 .get_voltage_sel = regulator_get_voltage_sel_regmap,
334 .set_voltage_sel = regulator_set_voltage_sel_regmap,
335 .set_voltage_time_sel = regulator_set_voltage_time_sel,
336 .set_ramp_delay = max77686_set_ramp_delay,
337 .set_suspend_disable = max77686_set_suspend_disable,
340 #define regulator_desc_ldo(num) { \
341 .name = "LDO"#num, \
342 .of_match = of_match_ptr("LDO"#num), \
343 .regulators_node = of_match_ptr("voltage-regulators"), \
344 .of_parse_cb = max77686_of_parse_cb, \
345 .id = MAX77686_LDO##num, \
346 .ops = &max77686_ops, \
347 .type = REGULATOR_VOLTAGE, \
348 .owner = THIS_MODULE, \
349 .min_uV = MAX77686_LDO_MINUV, \
350 .uV_step = MAX77686_LDO_UVSTEP, \
351 .ramp_delay = MAX77686_RAMP_DELAY, \
352 .n_voltages = MAX77686_VSEL_MASK + 1, \
353 .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
354 .vsel_mask = MAX77686_VSEL_MASK, \
355 .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
356 .enable_mask = MAX77686_OPMODE_MASK \
357 << MAX77686_OPMODE_SHIFT, \
359 #define regulator_desc_lpm_ldo(num) { \
360 .name = "LDO"#num, \
361 .of_match = of_match_ptr("LDO"#num), \
362 .regulators_node = of_match_ptr("voltage-regulators"), \
363 .id = MAX77686_LDO##num, \
364 .ops = &max77686_ldo_ops, \
365 .type = REGULATOR_VOLTAGE, \
366 .owner = THIS_MODULE, \
367 .min_uV = MAX77686_LDO_MINUV, \
368 .uV_step = MAX77686_LDO_UVSTEP, \
369 .ramp_delay = MAX77686_RAMP_DELAY, \
370 .n_voltages = MAX77686_VSEL_MASK + 1, \
371 .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
372 .vsel_mask = MAX77686_VSEL_MASK, \
373 .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
374 .enable_mask = MAX77686_OPMODE_MASK \
375 << MAX77686_OPMODE_SHIFT, \
377 #define regulator_desc_ldo_low(num) { \
378 .name = "LDO"#num, \
379 .of_match = of_match_ptr("LDO"#num), \
380 .regulators_node = of_match_ptr("voltage-regulators"), \
381 .id = MAX77686_LDO##num, \
382 .ops = &max77686_ldo_ops, \
383 .type = REGULATOR_VOLTAGE, \
384 .owner = THIS_MODULE, \
385 .min_uV = MAX77686_LDO_LOW_MINUV, \
386 .uV_step = MAX77686_LDO_LOW_UVSTEP, \
387 .ramp_delay = MAX77686_RAMP_DELAY, \
388 .n_voltages = MAX77686_VSEL_MASK + 1, \
389 .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
390 .vsel_mask = MAX77686_VSEL_MASK, \
391 .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
392 .enable_mask = MAX77686_OPMODE_MASK \
393 << MAX77686_OPMODE_SHIFT, \
395 #define regulator_desc_ldo1_low(num) { \
396 .name = "LDO"#num, \
397 .of_match = of_match_ptr("LDO"#num), \
398 .regulators_node = of_match_ptr("voltage-regulators"), \
399 .id = MAX77686_LDO##num, \
400 .ops = &max77686_ops, \
401 .type = REGULATOR_VOLTAGE, \
402 .owner = THIS_MODULE, \
403 .min_uV = MAX77686_LDO_LOW_MINUV, \
404 .uV_step = MAX77686_LDO_LOW_UVSTEP, \
405 .ramp_delay = MAX77686_RAMP_DELAY, \
406 .n_voltages = MAX77686_VSEL_MASK + 1, \
407 .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
408 .vsel_mask = MAX77686_VSEL_MASK, \
409 .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
410 .enable_mask = MAX77686_OPMODE_MASK \
411 << MAX77686_OPMODE_SHIFT, \
413 #define regulator_desc_buck(num) { \
414 .name = "BUCK"#num, \
415 .of_match = of_match_ptr("BUCK"#num), \
416 .regulators_node = of_match_ptr("voltage-regulators"), \
417 .of_parse_cb = max77686_of_parse_cb, \
418 .id = MAX77686_BUCK##num, \
419 .ops = &max77686_ops, \
420 .type = REGULATOR_VOLTAGE, \
421 .owner = THIS_MODULE, \
422 .min_uV = MAX77686_BUCK_MINUV, \
423 .uV_step = MAX77686_BUCK_UVSTEP, \
424 .ramp_delay = MAX77686_RAMP_DELAY, \
425 .n_voltages = MAX77686_VSEL_MASK + 1, \
426 .vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \
427 .vsel_mask = MAX77686_VSEL_MASK, \
428 .enable_reg = MAX77686_REG_BUCK5CTRL + (num - 5) * 2, \
429 .enable_mask = MAX77686_OPMODE_MASK, \
431 #define regulator_desc_buck1(num) { \
432 .name = "BUCK"#num, \
433 .of_match = of_match_ptr("BUCK"#num), \
434 .regulators_node = of_match_ptr("voltage-regulators"), \
435 .id = MAX77686_BUCK##num, \
436 .ops = &max77686_buck1_ops, \
437 .type = REGULATOR_VOLTAGE, \
438 .owner = THIS_MODULE, \
439 .min_uV = MAX77686_BUCK_MINUV, \
440 .uV_step = MAX77686_BUCK_UVSTEP, \
441 .ramp_delay = MAX77686_RAMP_DELAY, \
442 .n_voltages = MAX77686_VSEL_MASK + 1, \
443 .vsel_reg = MAX77686_REG_BUCK1OUT, \
444 .vsel_mask = MAX77686_VSEL_MASK, \
445 .enable_reg = MAX77686_REG_BUCK1CTRL, \
446 .enable_mask = MAX77686_OPMODE_MASK, \
448 #define regulator_desc_buck_dvs(num) { \
449 .name = "BUCK"#num, \
450 .of_match = of_match_ptr("BUCK"#num), \
451 .regulators_node = of_match_ptr("voltage-regulators"), \
452 .id = MAX77686_BUCK##num, \
453 .ops = &max77686_buck_dvs_ops, \
454 .type = REGULATOR_VOLTAGE, \
455 .owner = THIS_MODULE, \
456 .min_uV = MAX77686_DVS_MINUV, \
457 .uV_step = MAX77686_DVS_UVSTEP, \
458 .ramp_delay = MAX77686_DVS_RAMP_DELAY, \
459 .n_voltages = MAX77686_DVS_VSEL_MASK + 1, \
460 .vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \
461 .vsel_mask = MAX77686_DVS_VSEL_MASK, \
462 .enable_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \
463 .enable_mask = MAX77686_OPMODE_MASK \
464 << MAX77686_OPMODE_BUCK234_SHIFT, \
467 static const struct regulator_desc regulators[] = {
468 regulator_desc_ldo1_low(1),
469 regulator_desc_ldo_low(2),
470 regulator_desc_ldo(3),
471 regulator_desc_ldo(4),
472 regulator_desc_ldo(5),
473 regulator_desc_ldo_low(6),
474 regulator_desc_ldo_low(7),
475 regulator_desc_ldo_low(8),
476 regulator_desc_ldo(9),
477 regulator_desc_lpm_ldo(10),
478 regulator_desc_lpm_ldo(11),
479 regulator_desc_lpm_ldo(12),
480 regulator_desc_ldo(13),
481 regulator_desc_lpm_ldo(14),
482 regulator_desc_ldo_low(15),
483 regulator_desc_lpm_ldo(16),
484 regulator_desc_ldo(17),
485 regulator_desc_ldo(18),
486 regulator_desc_ldo(19),
487 regulator_desc_ldo(20),
488 regulator_desc_ldo(21),
489 regulator_desc_ldo(22),
490 regulator_desc_ldo(23),
491 regulator_desc_ldo(24),
492 regulator_desc_ldo(25),
493 regulator_desc_ldo(26),
494 regulator_desc_buck1(1),
495 regulator_desc_buck_dvs(2),
496 regulator_desc_buck_dvs(3),
497 regulator_desc_buck_dvs(4),
498 regulator_desc_buck(5),
499 regulator_desc_buck(6),
500 regulator_desc_buck(7),
501 regulator_desc_buck(8),
502 regulator_desc_buck(9),
505 static int max77686_pmic_probe(struct platform_device *pdev)
507 struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
508 struct max77686_data *max77686;
509 int i;
510 struct regulator_config config = { };
512 dev_dbg(&pdev->dev, "%s\n", __func__);
514 max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data),
515 GFP_KERNEL);
516 if (!max77686)
517 return -ENOMEM;
519 config.dev = iodev->dev;
520 config.regmap = iodev->regmap;
521 config.driver_data = max77686;
522 platform_set_drvdata(pdev, max77686);
524 for (i = 0; i < MAX77686_REGULATORS; i++) {
525 struct regulator_dev *rdev;
526 int id = regulators[i].id;
528 max77686->opmode[id] = MAX77686_NORMAL;
529 rdev = devm_regulator_register(&pdev->dev,
530 &regulators[i], &config);
531 if (IS_ERR(rdev)) {
532 int ret = PTR_ERR(rdev);
533 dev_err(&pdev->dev,
534 "regulator init failed for %d: %d\n", i, ret);
535 return ret;
539 return 0;
542 static const struct platform_device_id max77686_pmic_id[] = {
543 {"max77686-pmic", 0},
544 { },
546 MODULE_DEVICE_TABLE(platform, max77686_pmic_id);
548 static struct platform_driver max77686_pmic_driver = {
549 .driver = {
550 .name = "max77686-pmic",
552 .probe = max77686_pmic_probe,
553 .id_table = max77686_pmic_id,
556 static int __init max77686_pmic_init(void)
558 return platform_driver_register(&max77686_pmic_driver);
560 subsys_initcall(max77686_pmic_init);
562 static void __exit max77686_pmic_cleanup(void)
564 platform_driver_unregister(&max77686_pmic_driver);
566 module_exit(max77686_pmic_cleanup);
568 MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver");
569 MODULE_AUTHOR("Chiwoong Byun <woong.byun@samsung.com>");
570 MODULE_LICENSE("GPL");