?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'mvebu-soc-4.9-1' of git://git.infradead.org/linux-mvebu into next/soc
[linux/fpc-iii.git] / drivers / power / twl4030_charger.c
blobbcd4dc304f270c50739e2b2ddfc2850e1efe3bf0
1 /*
2 * TWL4030/TPS65950 BCI (Battery Charger Interface) driver
3 *
4 * Copyright (C) 2010 Gražvydas Ignotas <notasas@gmail.com>
5 *
6 * based on twl4030_bci_battery.c by TI
7 * Copyright (C) 2008 Texas Instruments, Inc.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 */
14
15 #include <linux/init.h>
16 #include <linux/module.h>
17 #include <linux/slab.h>
18 #include <linux/err.h>
19 #include <linux/platform_device.h>
20 #include <linux/interrupt.h>
21 #include <linux/i2c/twl.h>
22 #include <linux/power_supply.h>
23 #include <linux/notifier.h>
24 #include <linux/usb/otg.h>
25 #include <linux/iio/consumer.h>
26
27 #define TWL4030_BCIMDEN 0x00
28 #define TWL4030_BCIMDKEY 0x01
29 #define TWL4030_BCIMSTATEC 0x02
30 #define TWL4030_BCIICHG 0x08
31 #define TWL4030_BCIVAC 0x0a
32 #define TWL4030_BCIVBUS 0x0c
33 #define TWL4030_BCIMFSTS3 0x0F
34 #define TWL4030_BCIMFSTS4 0x10
35 #define TWL4030_BCICTL1 0x23
36 #define TWL4030_BB_CFG 0x12
37 #define TWL4030_BCIIREF1 0x27
38 #define TWL4030_BCIIREF2 0x28
39 #define TWL4030_BCIMFKEY 0x11
40 #define TWL4030_BCIMFEN3 0x14
41 #define TWL4030_BCIMFTH8 0x1d
42 #define TWL4030_BCIMFTH9 0x1e
43 #define TWL4030_BCIWDKEY 0x21
44
45 #define TWL4030_BCIMFSTS1 0x01
46
47 #define TWL4030_BCIAUTOWEN BIT(5)
48 #define TWL4030_CONFIG_DONE BIT(4)
49 #define TWL4030_CVENAC BIT(2)
50 #define TWL4030_BCIAUTOUSB BIT(1)
51 #define TWL4030_BCIAUTOAC BIT(0)
52 #define TWL4030_CGAIN BIT(5)
53 #define TWL4030_USBFASTMCHG BIT(2)
54 #define TWL4030_STS_VBUS BIT(7)
55 #define TWL4030_STS_USB_ID BIT(2)
56 #define TWL4030_BBCHEN BIT(4)
57 #define TWL4030_BBSEL_MASK 0x0c
58 #define TWL4030_BBSEL_2V5 0x00
59 #define TWL4030_BBSEL_3V0 0x04
60 #define TWL4030_BBSEL_3V1 0x08
61 #define TWL4030_BBSEL_3V2 0x0c
62 #define TWL4030_BBISEL_MASK 0x03
63 #define TWL4030_BBISEL_25uA 0x00
64 #define TWL4030_BBISEL_150uA 0x01
65 #define TWL4030_BBISEL_500uA 0x02
66 #define TWL4030_BBISEL_1000uA 0x03
67
68 #define TWL4030_BATSTSPCHG BIT(2)
69 #define TWL4030_BATSTSMCHG BIT(6)
70
71 /* BCI interrupts */
72 #define TWL4030_WOVF BIT(0) /* Watchdog overflow */
73 #define TWL4030_TMOVF BIT(1) /* Timer overflow */
74 #define TWL4030_ICHGHIGH BIT(2) /* Battery charge current high */
75 #define TWL4030_ICHGLOW BIT(3) /* Battery cc. low / FSM state change */
76 #define TWL4030_ICHGEOC BIT(4) /* Battery current end-of-charge */
77 #define TWL4030_TBATOR2 BIT(5) /* Battery temperature out of range 2 */
78 #define TWL4030_TBATOR1 BIT(6) /* Battery temperature out of range 1 */
79 #define TWL4030_BATSTS BIT(7) /* Battery status */
80
81 #define TWL4030_VBATLVL BIT(0) /* VBAT level */
82 #define TWL4030_VBATOV BIT(1) /* VBAT overvoltage */
83 #define TWL4030_VBUSOV BIT(2) /* VBUS overvoltage */
84 #define TWL4030_ACCHGOV BIT(3) /* Ac charger overvoltage */
85
86 #define TWL4030_MSTATEC_USB BIT(4)
87 #define TWL4030_MSTATEC_AC BIT(5)
88 #define TWL4030_MSTATEC_MASK 0x0f
89 #define TWL4030_MSTATEC_QUICK1 0x02
90 #define TWL4030_MSTATEC_QUICK7 0x07
91 #define TWL4030_MSTATEC_COMPLETE1 0x0b
92 #define TWL4030_MSTATEC_COMPLETE4 0x0e
93
94 /*
95 * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11)
96 * then AC is available.
97 */
98 static inline int ac_available(struct iio_channel *channel_vac)
99 {
100 int val, err;
101
102 if (!channel_vac)
103 return 0;
104
105 err = iio_read_channel_processed(channel_vac, &val);
106 if (err < 0)
107 return 0;
108 return val > 4500;
109 }
110
111 static bool allow_usb;
112 module_param(allow_usb, bool, 0644);
113 MODULE_PARM_DESC(allow_usb, "Allow USB charge drawing default current");
114
115 struct twl4030_bci {
116 struct device *dev;
117 struct power_supply *ac;
118 struct power_supply *usb;
119 struct usb_phy *transceiver;
120 struct notifier_block usb_nb;
121 struct work_struct work;
122 int irq_chg;
123 int irq_bci;
124 int usb_enabled;
125
126 /*
127 * ichg_* and *_cur values in uA. If any are 'large', we set
128 * CGAIN to '1' which doubles the range for half the
129 * precision.
130 */
131 unsigned int ichg_eoc, ichg_lo, ichg_hi;
132 unsigned int usb_cur, ac_cur;
133 struct iio_channel *channel_vac;
134 bool ac_is_active;
135 int usb_mode, ac_mode; /* charging mode requested */
136 #define CHARGE_OFF 0
137 #define CHARGE_AUTO 1
138 #define CHARGE_LINEAR 2
139
140 /* When setting the USB current we slowly increase the
141 * requested current until target is reached or the voltage
142 * drops below 4.75V. In the latter case we step back one
143 * step.
144 */
145 unsigned int usb_cur_target;
146 struct delayed_work current_worker;
147 #define USB_CUR_STEP 20000 /* 20mA at a time */
148 #define USB_MIN_VOLT 4750000 /* 4.75V */
149 #define USB_CUR_DELAY msecs_to_jiffies(100)
150 #define USB_MAX_CURRENT 1700000 /* TWL4030 caps at 1.7A */
151
152 unsigned long event;
153 };
154
155 /* strings for 'usb_mode' values */
156 static char *modes[] = { "off", "auto", "continuous" };
157
158 /*
159 * clear and set bits on an given register on a given module
160 */
161 static int twl4030_clear_set(u8 mod_no, u8 clear, u8 set, u8 reg)
162 {
163 u8 val = 0;
164 int ret;
165
166 ret = twl_i2c_read_u8(mod_no, &val, reg);
167 if (ret)
168 return ret;
169
170 val &= ~clear;
171 val |= set;
172
173 return twl_i2c_write_u8(mod_no, val, reg);
174 }
175
176 static int twl4030_bci_read(u8 reg, u8 *val)
177 {
178 return twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, val, reg);
179 }
180
181 static int twl4030_clear_set_boot_bci(u8 clear, u8 set)
182 {
183 return twl4030_clear_set(TWL_MODULE_PM_MASTER, clear,
184 TWL4030_CONFIG_DONE | TWL4030_BCIAUTOWEN | set,
185 TWL4030_PM_MASTER_BOOT_BCI);
186 }
187
188 static int twl4030bci_read_adc_val(u8 reg)
189 {
190 int ret, temp;
191 u8 val;
192
193 /* read MSB */
194 ret = twl4030_bci_read(reg + 1, &val);
195 if (ret)
196 return ret;
197
198 temp = (int)(val & 0x03) << 8;
199
200 /* read LSB */
201 ret = twl4030_bci_read(reg, &val);
202 if (ret)
203 return ret;
204
205 return temp | val;
206 }
207
208 /*
209 * Check if Battery Pack was present
210 */
211 static int twl4030_is_battery_present(struct twl4030_bci *bci)
212 {
213 int ret;
214 u8 val = 0;
215
216 /* Battery presence in Main charge? */
217 ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, &val, TWL4030_BCIMFSTS3);
218 if (ret)
219 return ret;
220 if (val & TWL4030_BATSTSMCHG)
221 return 0;
222
223 /*
224 * OK, It could be that bootloader did not enable main charger,
225 * pre-charge is h/w auto. So, Battery presence in Pre-charge?
226 */
227 ret = twl_i2c_read_u8(TWL4030_MODULE_PRECHARGE, &val,
228 TWL4030_BCIMFSTS1);
229 if (ret)
230 return ret;
231 if (val & TWL4030_BATSTSPCHG)
232 return 0;
233
234 return -ENODEV;
235 }
236
237 /*
238 * TI provided formulas:
239 * CGAIN == 0: ICHG = (BCIICHG * 1.7) / (2^10 - 1) - 0.85
240 * CGAIN == 1: ICHG = (BCIICHG * 3.4) / (2^10 - 1) - 1.7
241 * Here we use integer approximation of:
242 * CGAIN == 0: val * 1.6618 - 0.85 * 1000
243 * CGAIN == 1: (val * 1.6618 - 0.85 * 1000) * 2
244 */
245 /*
246 * convert twl register value for currents into uA
247 */
248 static int regval2ua(int regval, bool cgain)
249 {
250 if (cgain)
251 return (regval * 16618 - 8500 * 1000) / 5;
252 else
253 return (regval * 16618 - 8500 * 1000) / 10;
254 }
255
256 /*
257 * convert uA currents into twl register value
258 */
259 static int ua2regval(int ua, bool cgain)
260 {
261 int ret;
262 if (cgain)
263 ua /= 2;
264 ret = (ua * 10 + 8500 * 1000) / 16618;
265 /* rounding problems */
266 if (ret < 512)
267 ret = 512;
268 return ret;
269 }
270
271 static int twl4030_charger_update_current(struct twl4030_bci *bci)
272 {
273 int status;
274 int cur;
275 unsigned reg, cur_reg;
276 u8 bcictl1, oldreg, fullreg;
277 bool cgain = false;
278 u8 boot_bci;
279
280 /*
281 * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11)
282 * and AC is enabled, set current for 'ac'
283 */
284 if (ac_available(bci->channel_vac)) {
285 cur = bci->ac_cur;
286 bci->ac_is_active = true;
287 } else {
288 cur = bci->usb_cur;
289 bci->ac_is_active = false;
290 if (cur > bci->usb_cur_target) {
291 cur = bci->usb_cur_target;
292 bci->usb_cur = cur;
293 }
294 if (cur < bci->usb_cur_target)
295 schedule_delayed_work(&bci->current_worker, USB_CUR_DELAY);
296 }
297
298 /* First, check thresholds and see if cgain is needed */
299 if (bci->ichg_eoc >= 200000)
300 cgain = true;
301 if (bci->ichg_lo >= 400000)
302 cgain = true;
303 if (bci->ichg_hi >= 820000)
304 cgain = true;
305 if (cur > 852000)
306 cgain = true;
307
308 status = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
309 if (status < 0)
310 return status;
311 if (twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &boot_bci,
312 TWL4030_PM_MASTER_BOOT_BCI) < 0)
313 boot_bci = 0;
314 boot_bci &= 7;
315
316 if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN))
317 /* Need to turn for charging while we change the
318 * CGAIN bit. Leave it off while everything is
319 * updated.
320 */
321 twl4030_clear_set_boot_bci(boot_bci, 0);
322
323 /*
324 * For ichg_eoc, the hardware only supports reg values matching
325 * 100XXXX000, and requires the XXXX be stored in the high nibble
326 * of TWL4030_BCIMFTH8.
327 */
328 reg = ua2regval(bci->ichg_eoc, cgain);
329 if (reg > 0x278)
330 reg = 0x278;
331 if (reg < 0x200)
332 reg = 0x200;
333 reg = (reg >> 3) & 0xf;
334 fullreg = reg << 4;
335
336 /*
337 * For ichg_lo, reg value must match 10XXXX0000.
338 * XXXX is stored in low nibble of TWL4030_BCIMFTH8.
339 */
340 reg = ua2regval(bci->ichg_lo, cgain);
341 if (reg > 0x2F0)
342 reg = 0x2F0;
343 if (reg < 0x200)
344 reg = 0x200;
345 reg = (reg >> 4) & 0xf;
346 fullreg |= reg;
347
348 /* ichg_eoc and ichg_lo live in same register */
349 status = twl4030_bci_read(TWL4030_BCIMFTH8, &oldreg);
350 if (status < 0)
351 return status;
352 if (oldreg != fullreg) {
353 status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xF4,
354 TWL4030_BCIMFKEY);
355 if (status < 0)
356 return status;
357 twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
358 fullreg, TWL4030_BCIMFTH8);
359 }
360
361 /* ichg_hi threshold must be 1XXXX01100 (I think) */
362 reg = ua2regval(bci->ichg_hi, cgain);
363 if (reg > 0x3E0)
364 reg = 0x3E0;
365 if (reg < 0x200)
366 reg = 0x200;
367 fullreg = (reg >> 5) & 0xF;
368 fullreg <<= 4;
369 status = twl4030_bci_read(TWL4030_BCIMFTH9, &oldreg);
370 if (status < 0)
371 return status;
372 if ((oldreg & 0xF0) != fullreg) {
373 fullreg |= (oldreg & 0x0F);
374 status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
375 TWL4030_BCIMFKEY);
376 if (status < 0)
377 return status;
378 twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
379 fullreg, TWL4030_BCIMFTH9);
380 }
381
382 /*
383 * And finally, set the current. This is stored in
384 * two registers.
385 */
386 reg = ua2regval(cur, cgain);
387 /* we have only 10 bits */
388 if (reg > 0x3ff)
389 reg = 0x3ff;
390 status = twl4030_bci_read(TWL4030_BCIIREF1, &oldreg);
391 if (status < 0)
392 return status;
393 cur_reg = oldreg;
394 status = twl4030_bci_read(TWL4030_BCIIREF2, &oldreg);
395 if (status < 0)
396 return status;
397 cur_reg |= oldreg << 8;
398 if (reg != oldreg) {
399 /* disable write protection for one write access for
400 * BCIIREF */
401 status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
402 TWL4030_BCIMFKEY);
403 if (status < 0)
404 return status;
405 status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
406 (reg & 0x100) ? 3 : 2,
407 TWL4030_BCIIREF2);
408 if (status < 0)
409 return status;
410 /* disable write protection for one write access for
411 * BCIIREF */
412 status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
413 TWL4030_BCIMFKEY);
414 if (status < 0)
415 return status;
416 status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
417 reg & 0xff,
418 TWL4030_BCIIREF1);
419 }
420 if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN)) {
421 /* Flip CGAIN and re-enable charging */
422 bcictl1 ^= TWL4030_CGAIN;
423 twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
424 bcictl1, TWL4030_BCICTL1);
425 twl4030_clear_set_boot_bci(0, boot_bci);
426 }
427 return 0;
428 }
429
430 static int twl4030_charger_get_current(void);
431
432 static void twl4030_current_worker(struct work_struct *data)
433 {
434 int v, curr;
435 int res;
436 struct twl4030_bci *bci = container_of(data, struct twl4030_bci,
437 current_worker.work);
438
439 res = twl4030bci_read_adc_val(TWL4030_BCIVBUS);
440 if (res < 0)
441 v = 0;
442 else
443 /* BCIVBUS uses ADCIN8, 7/1023 V/step */
444 v = res * 6843;
445 curr = twl4030_charger_get_current();
446
447 dev_dbg(bci->dev, "v=%d cur=%d limit=%d target=%d\n", v, curr,
448 bci->usb_cur, bci->usb_cur_target);
449
450 if (v < USB_MIN_VOLT) {
451 /* Back up and stop adjusting. */
452 bci->usb_cur -= USB_CUR_STEP;
453 bci->usb_cur_target = bci->usb_cur;
454 } else if (bci->usb_cur >= bci->usb_cur_target ||
455 bci->usb_cur + USB_CUR_STEP > USB_MAX_CURRENT) {
456 /* Reached target and voltage is OK - stop */
457 return;
458 } else {
459 bci->usb_cur += USB_CUR_STEP;
460 schedule_delayed_work(&bci->current_worker, USB_CUR_DELAY);
461 }
462 twl4030_charger_update_current(bci);
463 }
464
465 /*
466 * Enable/Disable USB Charge functionality.
467 */
468 static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
469 {
470 int ret;
471
472 if (bci->usb_mode == CHARGE_OFF)
473 enable = false;
474 if (enable && !IS_ERR_OR_NULL(bci->transceiver)) {
475
476 twl4030_charger_update_current(bci);
477
478 /* Need to keep phy powered */
479 if (!bci->usb_enabled) {
480 pm_runtime_get_sync(bci->transceiver->dev);
481 bci->usb_enabled = 1;
482 }
483
484 if (bci->usb_mode == CHARGE_AUTO)
485 /* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */
486 ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB);
487
488 /* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */
489 ret = twl4030_clear_set(TWL_MODULE_MAIN_CHARGE, 0,
490 TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4);
491 if (bci->usb_mode == CHARGE_LINEAR) {
492 twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC|TWL4030_CVENAC, 0);
493 /* Watch dog key: WOVF acknowledge */
494 ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x33,
495 TWL4030_BCIWDKEY);
496 /* 0x24 + EKEY6: off mode */
497 ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x2a,
498 TWL4030_BCIMDKEY);
499 /* EKEY2: Linear charge: USB path */
500 ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x26,
501 TWL4030_BCIMDKEY);
502 /* WDKEY5: stop watchdog count */
503 ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xf3,
504 TWL4030_BCIWDKEY);
505 /* enable MFEN3 access */
506 ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x9c,
507 TWL4030_BCIMFKEY);
508 /* ICHGEOCEN - end-of-charge monitor (current < 80mA)
509 * (charging continues)
510 * ICHGLOWEN - current level monitor (charge continues)
511 * don't monitor over-current or heat save
512 */
513 ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xf0,
514 TWL4030_BCIMFEN3);
515 }
516 } else {
517 ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOUSB, 0);
518 ret |= twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x2a,
519 TWL4030_BCIMDKEY);
520 if (bci->usb_enabled) {
521 pm_runtime_mark_last_busy(bci->transceiver->dev);
522 pm_runtime_put_autosuspend(bci->transceiver->dev);
523 bci->usb_enabled = 0;
524 }
525 bci->usb_cur = 0;
526 }
527
528 return ret;
529 }
530
531 /*
532 * Enable/Disable AC Charge funtionality.
533 */
534 static int twl4030_charger_enable_ac(struct twl4030_bci *bci, bool enable)
535 {
536 int ret;
537
538 if (bci->ac_mode == CHARGE_OFF)
539 enable = false;
540
541 if (enable)
542 ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOAC);
543 else
544 ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC, 0);
545
546 return ret;
547 }
548
549 /*
550 * Enable/Disable charging of Backup Battery.
551 */
552 static int twl4030_charger_enable_backup(int uvolt, int uamp)
553 {
554 int ret;
555 u8 flags;
556
557 if (uvolt < 2500000 ||
558 uamp < 25) {
559 /* disable charging of backup battery */
560 ret = twl4030_clear_set(TWL_MODULE_PM_RECEIVER,
561 TWL4030_BBCHEN, 0, TWL4030_BB_CFG);
562 return ret;
563 }
564
565 flags = TWL4030_BBCHEN;
566 if (uvolt >= 3200000)
567 flags |= TWL4030_BBSEL_3V2;
568 else if (uvolt >= 3100000)
569 flags |= TWL4030_BBSEL_3V1;
570 else if (uvolt >= 3000000)
571 flags |= TWL4030_BBSEL_3V0;
572 else
573 flags |= TWL4030_BBSEL_2V5;
574
575 if (uamp >= 1000)
576 flags |= TWL4030_BBISEL_1000uA;
577 else if (uamp >= 500)
578 flags |= TWL4030_BBISEL_500uA;
579 else if (uamp >= 150)
580 flags |= TWL4030_BBISEL_150uA;
581 else
582 flags |= TWL4030_BBISEL_25uA;
583
584 ret = twl4030_clear_set(TWL_MODULE_PM_RECEIVER,
585 TWL4030_BBSEL_MASK | TWL4030_BBISEL_MASK,
586 flags,
587 TWL4030_BB_CFG);
588
589 return ret;
590 }
591
592 /*
593 * TWL4030 CHG_PRES (AC charger presence) events
594 */
595 static irqreturn_t twl4030_charger_interrupt(int irq, void *arg)
596 {
597 struct twl4030_bci *bci = arg;
598
599 dev_dbg(bci->dev, "CHG_PRES irq\n");
600 /* reset current on each 'plug' event */
601 bci->ac_cur = 500000;
602 twl4030_charger_update_current(bci);
603 power_supply_changed(bci->ac);
604 power_supply_changed(bci->usb);
605
606 return IRQ_HANDLED;
607 }
608
609 /*
610 * TWL4030 BCI monitoring events
611 */
612 static irqreturn_t twl4030_bci_interrupt(int irq, void *arg)
613 {
614 struct twl4030_bci *bci = arg;
615 u8 irqs1, irqs2;
616 int ret;
617
618 ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs1,
619 TWL4030_INTERRUPTS_BCIISR1A);
620 if (ret < 0)
621 return IRQ_HANDLED;
622
623 ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs2,
624 TWL4030_INTERRUPTS_BCIISR2A);
625 if (ret < 0)
626 return IRQ_HANDLED;
627
628 dev_dbg(bci->dev, "BCI irq %02x %02x\n", irqs2, irqs1);
629
630 if (irqs1 & (TWL4030_ICHGLOW | TWL4030_ICHGEOC)) {
631 /* charger state change, inform the core */
632 power_supply_changed(bci->ac);
633 power_supply_changed(bci->usb);
634 }
635 twl4030_charger_update_current(bci);
636
637 /* various monitoring events, for now we just log them here */
638 if (irqs1 & (TWL4030_TBATOR2 | TWL4030_TBATOR1))
639 dev_warn(bci->dev, "battery temperature out of range\n");
640
641 if (irqs1 & TWL4030_BATSTS)
642 dev_crit(bci->dev, "battery disconnected\n");
643
644 if (irqs2 & TWL4030_VBATOV)
645 dev_crit(bci->dev, "VBAT overvoltage\n");
646
647 if (irqs2 & TWL4030_VBUSOV)
648 dev_crit(bci->dev, "VBUS overvoltage\n");
649
650 if (irqs2 & TWL4030_ACCHGOV)
651 dev_crit(bci->dev, "Ac charger overvoltage\n");
652
653 return IRQ_HANDLED;
654 }
655
656 /*
657 * Provide "max_current" attribute in sysfs.
658 */
659 static ssize_t
660 twl4030_bci_max_current_store(struct device *dev, struct device_attribute *attr,
661 const char *buf, size_t n)
662 {
663 struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
664 int cur = 0;
665 int status = 0;
666 status = kstrtoint(buf, 10, &cur);
667 if (status)
668 return status;
669 if (cur < 0)
670 return -EINVAL;
671 if (dev == &bci->ac->dev)
672 bci->ac_cur = cur;
673 else
674 bci->usb_cur_target = cur;
675
676 twl4030_charger_update_current(bci);
677 return n;
678 }
679
680 /*
681 * sysfs max_current show
682 */
683 static ssize_t twl4030_bci_max_current_show(struct device *dev,
684 struct device_attribute *attr, char *buf)
685 {
686 int status = 0;
687 int cur = -1;
688 u8 bcictl1;
689 struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
690
691 if (dev == &bci->ac->dev) {
692 if (!bci->ac_is_active)
693 cur = bci->ac_cur;
694 } else {
695 if (bci->ac_is_active)
696 cur = bci->usb_cur_target;
697 }
698 if (cur < 0) {
699 cur = twl4030bci_read_adc_val(TWL4030_BCIIREF1);
700 if (cur < 0)
701 return cur;
702 status = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
703 if (status < 0)
704 return status;
705 cur = regval2ua(cur, bcictl1 & TWL4030_CGAIN);
706 }
707 return scnprintf(buf, PAGE_SIZE, "%u\n", cur);
708 }
709
710 static DEVICE_ATTR(max_current, 0644, twl4030_bci_max_current_show,
711 twl4030_bci_max_current_store);
712
713 static void twl4030_bci_usb_work(struct work_struct *data)
714 {
715 struct twl4030_bci *bci = container_of(data, struct twl4030_bci, work);
716
717 switch (bci->event) {
718 case USB_EVENT_VBUS:
719 case USB_EVENT_CHARGER:
720 twl4030_charger_enable_usb(bci, true);
721 break;
722 case USB_EVENT_NONE:
723 twl4030_charger_enable_usb(bci, false);
724 break;
725 }
726 }
727
728 static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val,
729 void *priv)
730 {
731 struct twl4030_bci *bci = container_of(nb, struct twl4030_bci, usb_nb);
732
733 dev_dbg(bci->dev, "OTG notify %lu\n", val);
734
735 /* reset current on each 'plug' event */
736 if (allow_usb)
737 bci->usb_cur_target = 500000;
738 else
739 bci->usb_cur_target = 100000;
740
741 bci->event = val;
742 schedule_work(&bci->work);
743
744 return NOTIFY_OK;
745 }
746
747 /*
748 * sysfs charger enabled store
749 */
750 static ssize_t
751 twl4030_bci_mode_store(struct device *dev, struct device_attribute *attr,
752 const char *buf, size_t n)
753 {
754 struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
755 int mode;
756 int status;
757
758 if (sysfs_streq(buf, modes[0]))
759 mode = 0;
760 else if (sysfs_streq(buf, modes[1]))
761 mode = 1;
762 else if (sysfs_streq(buf, modes[2]))
763 mode = 2;
764 else
765 return -EINVAL;
766 if (dev == &bci->ac->dev) {
767 if (mode == 2)
768 return -EINVAL;
769 twl4030_charger_enable_ac(bci, false);
770 bci->ac_mode = mode;
771 status = twl4030_charger_enable_ac(bci, true);
772 } else {
773 twl4030_charger_enable_usb(bci, false);
774 bci->usb_mode = mode;
775 status = twl4030_charger_enable_usb(bci, true);
776 }
777 return (status == 0) ? n : status;
778 }
779
780 /*
781 * sysfs charger enabled show
782 */
783 static ssize_t
784 twl4030_bci_mode_show(struct device *dev,
785 struct device_attribute *attr, char *buf)
786 {
787 struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
788 int len = 0;
789 int i;
790 int mode = bci->usb_mode;
791
792 if (dev == &bci->ac->dev)
793 mode = bci->ac_mode;
794
795 for (i = 0; i < ARRAY_SIZE(modes); i++)
796 if (mode == i)
797 len += snprintf(buf+len, PAGE_SIZE-len,
798 "[%s] ", modes[i]);
799 else
800 len += snprintf(buf+len, PAGE_SIZE-len,
801 "%s ", modes[i]);
802 buf[len-1] = '\n';
803 return len;
804 }
805 static DEVICE_ATTR(mode, 0644, twl4030_bci_mode_show,
806 twl4030_bci_mode_store);
807
808 static int twl4030_charger_get_current(void)
809 {
810 int curr;
811 int ret;
812 u8 bcictl1;
813
814 curr = twl4030bci_read_adc_val(TWL4030_BCIICHG);
815 if (curr < 0)
816 return curr;
817
818 ret = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
819 if (ret)
820 return ret;
821
822 return regval2ua(curr, bcictl1 & TWL4030_CGAIN);
823 }
824
825 /*
826 * Returns the main charge FSM state
827 * Or < 0 on failure.
828 */
829 static int twl4030bci_state(struct twl4030_bci *bci)
830 {
831 int ret;
832 u8 state;
833
834 ret = twl4030_bci_read(TWL4030_BCIMSTATEC, &state);
835 if (ret) {
836 pr_err("twl4030_bci: error reading BCIMSTATEC\n");
837 return ret;
838 }
839
840 dev_dbg(bci->dev, "state: %02x\n", state);
841
842 return state;
843 }
844
845 static int twl4030_bci_state_to_status(int state)
846 {
847 state &= TWL4030_MSTATEC_MASK;
848 if (TWL4030_MSTATEC_QUICK1 <= state && state <= TWL4030_MSTATEC_QUICK7)
849 return POWER_SUPPLY_STATUS_CHARGING;
850 else if (TWL4030_MSTATEC_COMPLETE1 <= state &&
851 state <= TWL4030_MSTATEC_COMPLETE4)
852 return POWER_SUPPLY_STATUS_FULL;
853 else
854 return POWER_SUPPLY_STATUS_NOT_CHARGING;
855 }
856
857 static int twl4030_bci_get_property(struct power_supply *psy,
858 enum power_supply_property psp,
859 union power_supply_propval *val)
860 {
861 struct twl4030_bci *bci = dev_get_drvdata(psy->dev.parent);
862 int is_charging;
863 int state;
864 int ret;
865
866 state = twl4030bci_state(bci);
867 if (state < 0)
868 return state;
869
870 if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
871 is_charging = state & TWL4030_MSTATEC_USB;
872 else
873 is_charging = state & TWL4030_MSTATEC_AC;
874 if (!is_charging) {
875 u8 s;
876 twl4030_bci_read(TWL4030_BCIMDEN, &s);
877 if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
878 is_charging = s & 1;
879 else
880 is_charging = s & 2;
881 if (is_charging)
882 /* A little white lie */
883 state = TWL4030_MSTATEC_QUICK1;
884 }
885
886 switch (psp) {
887 case POWER_SUPPLY_PROP_STATUS:
888 if (is_charging)
889 val->intval = twl4030_bci_state_to_status(state);
890 else
891 val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
892 break;
893 case POWER_SUPPLY_PROP_VOLTAGE_NOW:
894 /* charging must be active for meaningful result */
895 if (!is_charging)
896 return -ENODATA;
897 if (psy->desc->type == POWER_SUPPLY_TYPE_USB) {
898 ret = twl4030bci_read_adc_val(TWL4030_BCIVBUS);
899 if (ret < 0)
900 return ret;
901 /* BCIVBUS uses ADCIN8, 7/1023 V/step */
902 val->intval = ret * 6843;
903 } else {
904 ret = twl4030bci_read_adc_val(TWL4030_BCIVAC);
905 if (ret < 0)
906 return ret;
907 /* BCIVAC uses ADCIN11, 10/1023 V/step */
908 val->intval = ret * 9775;
909 }
910 break;
911 case POWER_SUPPLY_PROP_CURRENT_NOW:
912 if (!is_charging)
913 return -ENODATA;
914 /* current measurement is shared between AC and USB */
915 ret = twl4030_charger_get_current();
916 if (ret < 0)
917 return ret;
918 val->intval = ret;
919 break;
920 case POWER_SUPPLY_PROP_ONLINE:
921 val->intval = is_charging &&
922 twl4030_bci_state_to_status(state) !=
923 POWER_SUPPLY_STATUS_NOT_CHARGING;
924 break;
925 default:
926 return -EINVAL;
927 }
928
929 return 0;
930 }
931
932 static enum power_supply_property twl4030_charger_props[] = {
933 POWER_SUPPLY_PROP_STATUS,
934 POWER_SUPPLY_PROP_ONLINE,
935 POWER_SUPPLY_PROP_VOLTAGE_NOW,
936 POWER_SUPPLY_PROP_CURRENT_NOW,
937 };
938
939 #ifdef CONFIG_OF
940 static const struct twl4030_bci_platform_data *
941 twl4030_bci_parse_dt(struct device *dev)
942 {
943 struct device_node *np = dev->of_node;
944 struct twl4030_bci_platform_data *pdata;
945 u32 num;
946
947 if (!np)
948 return NULL;
949 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
950 if (!pdata)
951 return pdata;
952
953 if (of_property_read_u32(np, "ti,bb-uvolt", &num) == 0)
954 pdata->bb_uvolt = num;
955 if (of_property_read_u32(np, "ti,bb-uamp", &num) == 0)
956 pdata->bb_uamp = num;
957 return pdata;
958 }
959 #else
960 static inline const struct twl4030_bci_platform_data *
961 twl4030_bci_parse_dt(struct device *dev)
962 {
963 return NULL;
964 }
965 #endif
966
967 static const struct power_supply_desc twl4030_bci_ac_desc = {
968 .name = "twl4030_ac",
969 .type = POWER_SUPPLY_TYPE_MAINS,
970 .properties = twl4030_charger_props,
971 .num_properties = ARRAY_SIZE(twl4030_charger_props),
972 .get_property = twl4030_bci_get_property,
973 };
974
975 static const struct power_supply_desc twl4030_bci_usb_desc = {
976 .name = "twl4030_usb",
977 .type = POWER_SUPPLY_TYPE_USB,
978 .properties = twl4030_charger_props,
979 .num_properties = ARRAY_SIZE(twl4030_charger_props),
980 .get_property = twl4030_bci_get_property,
981 };
982
983 static int twl4030_bci_probe(struct platform_device *pdev)
984 {
985 struct twl4030_bci *bci;
986 const struct twl4030_bci_platform_data *pdata = pdev->dev.platform_data;
987 int ret;
988 u32 reg;
989
990 bci = devm_kzalloc(&pdev->dev, sizeof(*bci), GFP_KERNEL);
991 if (bci == NULL)
992 return -ENOMEM;
993
994 if (!pdata)
995 pdata = twl4030_bci_parse_dt(&pdev->dev);
996
997 bci->ichg_eoc = 80100; /* Stop charging when current drops to here */
998 bci->ichg_lo = 241000; /* Low threshold */
999 bci->ichg_hi = 500000; /* High threshold */
1000 bci->ac_cur = 500000; /* 500mA */
1001 if (allow_usb)
1002 bci->usb_cur_target = 500000; /* 500mA */
1003 else
1004 bci->usb_cur_target = 100000; /* 100mA */
1005 bci->usb_mode = CHARGE_AUTO;
1006 bci->ac_mode = CHARGE_AUTO;
1007
1008 bci->dev = &pdev->dev;
1009 bci->irq_chg = platform_get_irq(pdev, 0);
1010 bci->irq_bci = platform_get_irq(pdev, 1);
1011
1012 /* Only proceed further *IF* battery is physically present */
1013 ret = twl4030_is_battery_present(bci);
1014 if (ret) {
1015 dev_crit(&pdev->dev, "Battery was not detected:%d\n", ret);
1016 return ret;
1017 }
1018
1019 platform_set_drvdata(pdev, bci);
1020
1021 bci->ac = devm_power_supply_register(&pdev->dev, &twl4030_bci_ac_desc,
1022 NULL);
1023 if (IS_ERR(bci->ac)) {
1024 ret = PTR_ERR(bci->ac);
1025 dev_err(&pdev->dev, "failed to register ac: %d\n", ret);
1026 return ret;
1027 }
1028
1029 bci->usb = devm_power_supply_register(&pdev->dev, &twl4030_bci_usb_desc,
1030 NULL);
1031 if (IS_ERR(bci->usb)) {
1032 ret = PTR_ERR(bci->usb);
1033 dev_err(&pdev->dev, "failed to register usb: %d\n", ret);
1034 return ret;
1035 }
1036
1037 ret = devm_request_threaded_irq(&pdev->dev, bci->irq_chg, NULL,
1038 twl4030_charger_interrupt, IRQF_ONESHOT, pdev->name,
1039 bci);
1040 if (ret < 0) {
1041 dev_err(&pdev->dev, "could not request irq %d, status %d\n",
1042 bci->irq_chg, ret);
1043 return ret;
1044 }
1045
1046 ret = devm_request_threaded_irq(&pdev->dev, bci->irq_bci, NULL,
1047 twl4030_bci_interrupt, IRQF_ONESHOT, pdev->name, bci);
1048 if (ret < 0) {
1049 dev_err(&pdev->dev, "could not request irq %d, status %d\n",
1050 bci->irq_bci, ret);
1051 return ret;
1052 }
1053
1054 bci->channel_vac = iio_channel_get(&pdev->dev, "vac");
1055 if (IS_ERR(bci->channel_vac)) {
1056 bci->channel_vac = NULL;
1057 dev_warn(&pdev->dev, "could not request vac iio channel");
1058 }
1059
1060 INIT_WORK(&bci->work, twl4030_bci_usb_work);
1061 INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker);
1062
1063 bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
1064 if (bci->dev->of_node) {
1065 struct device_node *phynode;
1066
1067 phynode = of_find_compatible_node(bci->dev->of_node->parent,
1068 NULL, "ti,twl4030-usb");
1069 if (phynode)
1070 bci->transceiver = devm_usb_get_phy_by_node(
1071 bci->dev, phynode, &bci->usb_nb);
1072 }
1073
1074 /* Enable interrupts now. */
1075 reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 |
1076 TWL4030_TBATOR1 | TWL4030_BATSTS);
1077 ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
1078 TWL4030_INTERRUPTS_BCIIMR1A);
1079 if (ret < 0) {
1080 dev_err(&pdev->dev, "failed to unmask interrupts: %d\n", ret);
1081 goto fail;
1082 }
1083
1084 reg = ~(u32)(TWL4030_VBATOV | TWL4030_VBUSOV | TWL4030_ACCHGOV);
1085 ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
1086 TWL4030_INTERRUPTS_BCIIMR2A);
1087 if (ret < 0)
1088 dev_warn(&pdev->dev, "failed to unmask interrupts: %d\n", ret);
1089
1090 twl4030_charger_update_current(bci);
1091 if (device_create_file(&bci->usb->dev, &dev_attr_max_current))
1092 dev_warn(&pdev->dev, "could not create sysfs file\n");
1093 if (device_create_file(&bci->usb->dev, &dev_attr_mode))
1094 dev_warn(&pdev->dev, "could not create sysfs file\n");
1095 if (device_create_file(&bci->ac->dev, &dev_attr_mode))
1096 dev_warn(&pdev->dev, "could not create sysfs file\n");
1097 if (device_create_file(&bci->ac->dev, &dev_attr_max_current))
1098 dev_warn(&pdev->dev, "could not create sysfs file\n");
1099
1100 twl4030_charger_enable_ac(bci, true);
1101 if (!IS_ERR_OR_NULL(bci->transceiver))
1102 twl4030_bci_usb_ncb(&bci->usb_nb,
1103 bci->transceiver->last_event,
1104 NULL);
1105 else
1106 twl4030_charger_enable_usb(bci, false);
1107 if (pdata)
1108 twl4030_charger_enable_backup(pdata->bb_uvolt,
1109 pdata->bb_uamp);
1110 else
1111 twl4030_charger_enable_backup(0, 0);
1112
1113 return 0;
1114 fail:
1115 iio_channel_release(bci->channel_vac);
1116
1117 return ret;
1118 }
1119
1120 static int __exit twl4030_bci_remove(struct platform_device *pdev)
1121 {
1122 struct twl4030_bci *bci = platform_get_drvdata(pdev);
1123
1124 twl4030_charger_enable_ac(bci, false);
1125 twl4030_charger_enable_usb(bci, false);
1126 twl4030_charger_enable_backup(0, 0);
1127
1128 iio_channel_release(bci->channel_vac);
1129
1130 device_remove_file(&bci->usb->dev, &dev_attr_max_current);
1131 device_remove_file(&bci->usb->dev, &dev_attr_mode);
1132 device_remove_file(&bci->ac->dev, &dev_attr_max_current);
1133 device_remove_file(&bci->ac->dev, &dev_attr_mode);
1134 /* mask interrupts */
1135 twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
1136 TWL4030_INTERRUPTS_BCIIMR1A);
1137 twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
1138 TWL4030_INTERRUPTS_BCIIMR2A);
1139
1140 return 0;
1141 }
1142
1143 static const struct of_device_id twl_bci_of_match[] = {
1144 {.compatible = "ti,twl4030-bci", },
1145 { }
1146 };
1147 MODULE_DEVICE_TABLE(of, twl_bci_of_match);
1148
1149 static struct platform_driver twl4030_bci_driver = {
1150 .probe = twl4030_bci_probe,
1151 .driver = {
1152 .name = "twl4030_bci",
1153 .of_match_table = of_match_ptr(twl_bci_of_match),
1154 },
1155 .remove = __exit_p(twl4030_bci_remove),
1156 };
1157 module_platform_driver(twl4030_bci_driver);
1158
1159 MODULE_AUTHOR("Gražvydas Ignotas");
1160 MODULE_DESCRIPTION("TWL4030 Battery Charger Interface driver");
1161 MODULE_LICENSE("GPL");
1162 MODULE_ALIAS("platform:twl4030_bci");
Linux with added FPC-III support