include/media/v4l2-subdev.h

   1 /*
   2     V4L2 sub-device support header.
   3
   4     Copyright (C) 2008  Hans Verkuil <hverkuil@xs4all.nl>
   5
   6     This program is free software; you can redistribute it and/or modify
   7     it under the terms of the GNU General Public License as published by
   8     the Free Software Foundation; either version 2 of the License, or
   9     (at your option) any later version.
  10
  11     This program is distributed in the hope that it will be useful,
  12     but WITHOUT ANY WARRANTY; without even the implied warranty of
  13     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14     GNU General Public License for more details.
  15
  16     You should have received a copy of the GNU General Public License
  17     along with this program; if not, write to the Free Software
  18     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19  */
  20
  21 #ifndef _V4L2_SUBDEV_H
  22 #define _V4L2_SUBDEV_H
  23
  24 #include <media/v4l2-common.h>
  25 #include <media/v4l2-mediabus.h>
  26
  27 /* generic v4l2_device notify callback notification values */
  28 #define V4L2_SUBDEV_IR_RX_NOTIFY                _IOW('v', 0, u32)
  29 #define V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ      0x00000001
  30 #define V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED    0x00000002
  31 #define V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN       0x00000004
  32 #define V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN       0x00000008
  33
  34 #define V4L2_SUBDEV_IR_TX_NOTIFY                _IOW('v', 1, u32)
  35 #define V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ      0x00000001
  36
  37 struct v4l2_device;
  38 struct v4l2_subdev;
  39 struct tuner_setup;
  40
  41 /* decode_vbi_line */
  42 struct v4l2_decode_vbi_line {
  43         u32 is_second_field;    /* Set to 0 for the first (odd) field,
  44                                    set to 1 for the second (even) field. */
  45         u8 *p;                  /* Pointer to the sliced VBI data from the decoder.
  46                                    On exit points to the start of the payload. */
  47         u32 line;               /* Line number of the sliced VBI data (1-23) */
  48         u32 type;               /* VBI service type (V4L2_SLICED_*). 0 if no service found */
  49 };
  50
  51 /* Sub-devices are devices that are connected somehow to the main bridge
  52    device. These devices are usually audio/video muxers/encoders/decoders or
  53    sensors and webcam controllers.
  54
  55    Usually these devices are controlled through an i2c bus, but other busses
  56    may also be used.
  57
  58    The v4l2_subdev struct provides a way of accessing these devices in a
  59    generic manner. Most operations that these sub-devices support fall in
  60    a few categories: core ops, audio ops, video ops and tuner ops.
  61
  62    More categories can be added if needed, although this should remain a
  63    limited set (no more than approx. 8 categories).
  64
  65    Each category has its own set of ops that subdev drivers can implement.
  66
  67    A subdev driver can leave the pointer to the category ops NULL if
  68    it does not implement them (e.g. an audio subdev will generally not
  69    implement the video category ops). The exception is the core category:
  70    this must always be present.
  71
  72    These ops are all used internally so it is no problem to change, remove
  73    or add ops or move ops from one to another category. Currently these
  74    ops are based on the original ioctls, but since ops are not limited to
  75    one argument there is room for improvement here once all i2c subdev
  76    drivers are converted to use these ops.
  77  */
  78
  79 /* Core ops: it is highly recommended to implement at least these ops:
  80
  81    g_chip_ident
  82    log_status
  83    g_register
  84    s_register
  85
  86    This provides basic debugging support.
  87
  88    The ioctl ops is meant for generic ioctl-like commands. Depending on
  89    the use-case it might be better to use subdev-specific ops (currently
  90    not yet implemented) since ops provide proper type-checking.
  91  */
  92
  93 /* s_config: if set, then it is always called by the v4l2_i2c_new_subdev*
  94         functions after the v4l2_subdev was registered. It is used to pass
  95         platform data to the subdev which can be used during initialization.
  96
  97    init: initialize the sensor registors to some sort of reasonable default
  98         values. Do not use for new drivers and should be removed in existing
  99         drivers.
 100
 101    load_fw: load firmware.
 102
 103    reset: generic reset command. The argument selects which subsystems to
 104         reset. Passing 0 will always reset the whole chip. Do not use for new
 105         drivers without discussing this first on the linux-media mailinglist.
 106         There should be no reason normally to reset a device.
 107
 108    s_gpio: set GPIO pins. Very simple right now, might need to be extended with
 109         a direction argument if needed.
 110
 111    s_power: puts subdevice in power saving mode (on == 0) or normal operation
 112         mode (on == 1).
 113  */
 114 struct v4l2_subdev_core_ops {
 115         int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
 116         int (*log_status)(struct v4l2_subdev *sd);
 117         int (*s_config)(struct v4l2_subdev *sd, int irq, void *platform_data);
 118         int (*init)(struct v4l2_subdev *sd, u32 val);
 119         int (*load_fw)(struct v4l2_subdev *sd);
 120         int (*reset)(struct v4l2_subdev *sd, u32 val);
 121         int (*s_gpio)(struct v4l2_subdev *sd, u32 val);
 122         int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc);
 123         int (*g_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
 124         int (*s_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
 125         int (*g_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
 126         int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
 127         int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
 128         int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
 129         int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
 130         long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg);
 131 #ifdef CONFIG_VIDEO_ADV_DEBUG
 132         int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
 133         int (*s_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
 134 #endif
 135         int (*s_power)(struct v4l2_subdev *sd, int on);
 136 };
 137
 138 /* s_mode: switch the tuner to a specific tuner mode. Replacement of s_radio.
 139
 140    s_radio: v4l device was opened in Radio mode, to be replaced by s_mode.
 141
 142    s_type_addr: sets tuner type and its I2C addr.
 143
 144    s_config: sets tda9887 specific stuff, like port1, port2 and qss
 145  */
 146 struct v4l2_subdev_tuner_ops {
 147         int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type);
 148         int (*s_radio)(struct v4l2_subdev *sd);
 149         int (*s_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
 150         int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
 151         int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
 152         int (*s_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
 153         int (*g_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm);
 154         int (*s_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm);
 155         int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type);
 156         int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config);
 157 };
 158
 159 /* s_clock_freq: set the frequency (in Hz) of the audio clock output.
 160         Used to slave an audio processor to the video decoder, ensuring that
 161         audio and video remain synchronized. Usual values for the frequency
 162         are 48000, 44100 or 32000 Hz. If the frequency is not supported, then
 163         -EINVAL is returned.
 164
 165    s_i2s_clock_freq: sets I2S speed in bps. This is used to provide a standard
 166         way to select I2S clock used by driving digital audio streams at some
 167         board designs. Usual values for the frequency are 1024000 and 2048000.
 168         If the frequency is not supported, then -EINVAL is returned.
 169
 170    s_routing: used to define the input and/or output pins of an audio chip,
 171         and any additional configuration data.
 172         Never attempt to use user-level input IDs (e.g. Composite, S-Video,
 173         Tuner) at this level. An i2c device shouldn't know about whether an
 174         input pin is connected to a Composite connector, become on another
 175         board or platform it might be connected to something else entirely.
 176         The calling driver is responsible for mapping a user-level input to
 177         the right pins on the i2c device.
 178  */
 179 struct v4l2_subdev_audio_ops {
 180         int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
 181         int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
 182         int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
 183         int (*s_stream)(struct v4l2_subdev *sd, int enable);
 184 };
 185
 186 /*
 187    s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by
 188         video input devices.
 189
 190    s_crystal_freq: sets the frequency of the crystal used to generate the
 191         clocks in Hz. An extra flags field allows device specific configuration
 192         regarding clock frequency dividers, etc. If not used, then set flags
 193         to 0. If the frequency is not supported, then -EINVAL is returned.
 194
 195    g_input_status: get input status. Same as the status field in the v4l2_input
 196         struct.
 197
 198    s_routing: see s_routing in audio_ops, except this version is for video
 199         devices.
 200
 201    s_dv_preset: set dv (Digital Video) preset in the sub device. Similar to
 202         s_std()
 203
 204    query_dv_preset: query dv preset in the sub device. This is similar to
 205         querystd()
 206
 207    s_dv_timings(): Set custom dv timings in the sub device. This is used
 208         when sub device is capable of setting detailed timing information
 209         in the hardware to generate/detect the video signal.
 210
 211    g_dv_timings(): Get custom dv timings in the sub device.
 212
 213    enum_mbus_fmt: enumerate pixel formats, provided by a video data source
 214
 215    g_mbus_fmt: get the current pixel format, provided by a video data source
 216
 217    try_mbus_fmt: try to set a pixel format on a video data source
 218
 219    s_mbus_fmt: set a pixel format on a video data source
 220  */
 221 struct v4l2_subdev_video_ops {
 222         int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
 223         int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags);
 224         int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std);
 225         int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std);
 226         int (*g_input_status)(struct v4l2_subdev *sd, u32 *status);
 227         int (*s_stream)(struct v4l2_subdev *sd, int enable);
 228         int (*enum_fmt)(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmtdesc);
 229         int (*g_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt);
 230         int (*try_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt);
 231         int (*s_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt);
 232         int (*cropcap)(struct v4l2_subdev *sd, struct v4l2_cropcap *cc);
 233         int (*g_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop);
 234         int (*s_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop);
 235         int (*g_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param);
 236         int (*s_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param);
 237         int (*enum_framesizes)(struct v4l2_subdev *sd, struct v4l2_frmsizeenum *fsize);
 238         int (*enum_frameintervals)(struct v4l2_subdev *sd, struct v4l2_frmivalenum *fival);
 239         int (*enum_dv_presets) (struct v4l2_subdev *sd,
 240                         struct v4l2_dv_enum_preset *preset);
 241         int (*s_dv_preset)(struct v4l2_subdev *sd,
 242                         struct v4l2_dv_preset *preset);
 243         int (*query_dv_preset)(struct v4l2_subdev *sd,
 244                         struct v4l2_dv_preset *preset);
 245         int (*s_dv_timings)(struct v4l2_subdev *sd,
 246                         struct v4l2_dv_timings *timings);
 247         int (*g_dv_timings)(struct v4l2_subdev *sd,
 248                         struct v4l2_dv_timings *timings);
 249         int (*enum_mbus_fmt)(struct v4l2_subdev *sd, unsigned int index,
 250                              enum v4l2_mbus_pixelcode *code);
 251         int (*g_mbus_fmt)(struct v4l2_subdev *sd,
 252                           struct v4l2_mbus_framefmt *fmt);
 253         int (*try_mbus_fmt)(struct v4l2_subdev *sd,
 254                             struct v4l2_mbus_framefmt *fmt);
 255         int (*s_mbus_fmt)(struct v4l2_subdev *sd,
 256                           struct v4l2_mbus_framefmt *fmt);
 257 };
 258
 259 /*
 260    decode_vbi_line: video decoders that support sliced VBI need to implement
 261         this ioctl. Field p of the v4l2_sliced_vbi_line struct is set to the
 262         start of the VBI data that was generated by the decoder. The driver
 263         then parses the sliced VBI data and sets the other fields in the
 264         struct accordingly. The pointer p is updated to point to the start of
 265         the payload which can be copied verbatim into the data field of the
 266         v4l2_sliced_vbi_data struct. If no valid VBI data was found, then the
 267         type field is set to 0 on return.
 268
 269    s_vbi_data: used to generate VBI signals on a video signal.
 270         v4l2_sliced_vbi_data is filled with the data packets that should be
 271         output. Note that if you set the line field to 0, then that VBI signal
 272         is disabled. If no valid VBI data was found, then the type field is
 273         set to 0 on return.
 274
 275    g_vbi_data: used to obtain the sliced VBI packet from a readback register.
 276         Not all video decoders support this. If no data is available because
 277         the readback register contains invalid or erroneous data -EIO is
 278         returned. Note that you must fill in the 'id' member and the 'field'
 279         member (to determine whether CC data from the first or second field
 280         should be obtained).
 281
 282    s_raw_fmt: setup the video encoder/decoder for raw VBI.
 283
 284    g_sliced_fmt: retrieve the current sliced VBI settings.
 285
 286    s_sliced_fmt: setup the sliced VBI settings.
 287  */
 288 struct v4l2_subdev_vbi_ops {
 289         int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line);
 290         int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data);
 291         int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data);
 292         int (*g_sliced_vbi_cap)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_cap *cap);
 293         int (*s_raw_fmt)(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt);
 294         int (*g_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
 295         int (*s_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
 296 };
 297
 298 /**
 299  * struct v4l2_subdev_sensor_ops - v4l2-subdev sensor operations
 300  * @g_skip_top_lines: number of lines at the top of the image to be skipped.
 301  *                    This is needed for some sensors, which always corrupt
 302  *                    several top lines of the output image, or which send their
 303  *                    metadata in them.
 304  */
 305 struct v4l2_subdev_sensor_ops {
 306         int (*g_skip_top_lines)(struct v4l2_subdev *sd, u32 *lines);
 307 };
 308
 309 /*
 310    interrupt_service_routine: Called by the bridge chip's interrupt service
 311         handler, when an IR interrupt status has be raised due to this subdev,
 312         so that this subdev can handle the details.  It may schedule work to be
 313         performed later.  It must not sleep.  *Called from an IRQ context*.
 314
 315    [rt]x_g_parameters: Get the current operating parameters and state of the
 316         the IR receiver or transmitter.
 317
 318    [rt]x_s_parameters: Set the current operating parameters and state of the
 319         the IR receiver or transmitter.  It is recommended to call
 320         [rt]x_g_parameters first to fill out the current state, and only change
 321         the fields that need to be changed.  Upon return, the actual device
 322         operating parameters and state will be returned.  Note that hardware
 323         limitations may prevent the actual settings from matching the requested
 324         settings - e.g. an actual carrier setting of 35,904 Hz when 36,000 Hz
 325         was requested.  An exception is when the shutdown parameter is true.
 326         The last used operational parameters will be returned, but the actual
 327         state of the hardware be different to minimize power consumption and
 328         processing when shutdown is true.
 329
 330    rx_read: Reads received codes or pulse width data.
 331         The semantics are similar to a non-blocking read() call.
 332
 333    tx_write: Writes codes or pulse width data for transmission.
 334         The semantics are similar to a non-blocking write() call.
 335  */
 336
 337 enum v4l2_subdev_ir_mode {
 338         V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, /* space & mark widths in nanosecs */
 339 };
 340
 341 /* Data format of data read or written for V4L2_SUBDEV_IR_MODE_PULSE_WIDTH */
 342 #define V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS       0x7fffffff
 343 #define V4L2_SUBDEV_IR_PULSE_LEVEL_MASK         0x80000000
 344 #define V4L2_SUBDEV_IR_PULSE_RX_SEQ_END         0xffffffff
 345
 346 struct v4l2_subdev_ir_parameters {
 347         /* Either Rx or Tx */
 348         unsigned int bytes_per_data_element; /* of data in read or write call */
 349         enum v4l2_subdev_ir_mode mode;
 350
 351         bool enable;
 352         bool interrupt_enable;
 353         bool shutdown; /* true: set hardware to low/no power, false: normal */
 354
 355         bool modulation;           /* true: uses carrier, false: baseband */
 356         u32 max_pulse_width;       /* ns,      valid only for baseband signal */
 357         unsigned int carrier_freq; /* Hz,      valid only for modulated signal*/
 358         unsigned int duty_cycle;   /* percent, valid only for modulated signal*/
 359         bool invert;               /* logically invert sense of mark/space */
 360
 361         /* Rx only */
 362         u32 noise_filter_min_width;       /* ns, min time of a valid pulse */
 363         unsigned int carrier_range_lower; /* Hz, valid only for modulated sig */
 364         unsigned int carrier_range_upper; /* Hz, valid only for modulated sig */
 365         u32 resolution;                   /* ns */
 366 };
 367
 368 struct v4l2_subdev_ir_ops {
 369         /* Common to receiver and transmitter */
 370         int (*interrupt_service_routine)(struct v4l2_subdev *sd,
 371                                                 u32 status, bool *handled);
 372
 373         /* Receiver */
 374         int (*rx_read)(struct v4l2_subdev *sd, u8 *buf, size_t count,
 375                                 ssize_t *num);
 376
 377         int (*rx_g_parameters)(struct v4l2_subdev *sd,
 378                                 struct v4l2_subdev_ir_parameters *params);
 379         int (*rx_s_parameters)(struct v4l2_subdev *sd,
 380                                 struct v4l2_subdev_ir_parameters *params);
 381
 382         /* Transmitter */
 383         int (*tx_write)(struct v4l2_subdev *sd, u8 *buf, size_t count,
 384                                 ssize_t *num);
 385
 386         int (*tx_g_parameters)(struct v4l2_subdev *sd,
 387                                 struct v4l2_subdev_ir_parameters *params);
 388         int (*tx_s_parameters)(struct v4l2_subdev *sd,
 389                                 struct v4l2_subdev_ir_parameters *params);
 390 };
 391
 392 struct v4l2_subdev_ops {
 393         const struct v4l2_subdev_core_ops       *core;
 394         const struct v4l2_subdev_tuner_ops      *tuner;
 395         const struct v4l2_subdev_audio_ops      *audio;
 396         const struct v4l2_subdev_video_ops      *video;
 397         const struct v4l2_subdev_vbi_ops        *vbi;
 398         const struct v4l2_subdev_ir_ops         *ir;
 399         const struct v4l2_subdev_sensor_ops     *sensor;
 400 };
 401
 402 #define V4L2_SUBDEV_NAME_SIZE 32
 403
 404 /* Set this flag if this subdev is a i2c device. */
 405 #define V4L2_SUBDEV_FL_IS_I2C (1U << 0)
 406 /* Set this flag if this subdev is a spi device. */
 407 #define V4L2_SUBDEV_FL_IS_SPI (1U << 1)
 408
 409 /* Each instance of a subdev driver should create this struct, either
 410    stand-alone or embedded in a larger struct.
 411  */
 412 struct v4l2_subdev {
 413         struct list_head list;
 414         struct module *owner;
 415         u32 flags;
 416         struct v4l2_device *v4l2_dev;
 417         const struct v4l2_subdev_ops *ops;
 418         /* name must be unique */
 419         char name[V4L2_SUBDEV_NAME_SIZE];
 420         /* can be used to group similar subdevs, value is driver-specific */
 421         u32 grp_id;
 422         /* pointer to private data */
 423         void *priv;
 424 };
 425
 426 static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p)
 427 {
 428         sd->priv = p;
 429 }
 430
 431 static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd)
 432 {
 433         return sd->priv;
 434 }
 435
 436 static inline void v4l2_subdev_init(struct v4l2_subdev *sd,
 437                                         const struct v4l2_subdev_ops *ops)
 438 {
 439         INIT_LIST_HEAD(&sd->list);
 440         /* ops->core MUST be set */
 441         BUG_ON(!ops || !ops->core);
 442         sd->ops = ops;
 443         sd->v4l2_dev = NULL;
 444         sd->flags = 0;
 445         sd->name[0] = '\0';
 446         sd->grp_id = 0;
 447         sd->priv = NULL;
 448 }
 449
 450 /* Call an ops of a v4l2_subdev, doing the right checks against
 451    NULL pointers.
 452
 453    Example: err = v4l2_subdev_call(sd, core, g_chip_ident, &chip);
 454  */
 455 #define v4l2_subdev_call(sd, o, f, args...)                             \
 456         (!(sd) ? -ENODEV : (((sd)->ops->o && (sd)->ops->o->f) ? \
 457                 (sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD))
 458
 459 /* Send a notification to v4l2_device. */
 460 #define v4l2_subdev_notify(sd, notification, arg)                          \
 461         ((!(sd) || !(sd)->v4l2_dev || !(sd)->v4l2_dev->notify) ? -ENODEV : \
 462          (sd)->v4l2_dev->notify((sd), (notification), (arg)))
 463
 464 #endif