drivers/spi/spi-meson-spifc.c

   1 /*
   2  * Driver for Amlogic Meson SPI flash controller (SPIFC)
   3  *
   4  * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * version 2 as published by the Free Software Foundation.
   9  *
  10  * You should have received a copy of the GNU General Public License
  11  * along with this program. If not, see <http://www.gnu.org/licenses/>.
  12  */
  13
  14 #include <linux/clk.h>
  15 #include <linux/delay.h>
  16 #include <linux/device.h>
  17 #include <linux/io.h>
  18 #include <linux/kernel.h>
  19 #include <linux/module.h>
  20 #include <linux/of.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/pm_runtime.h>
  23 #include <linux/regmap.h>
  24 #include <linux/spi/spi.h>
  25 #include <linux/types.h>
  26
  27 /* register map */
  28 #define REG_CMD                 0x00
  29 #define REG_ADDR                0x04
  30 #define REG_CTRL                0x08
  31 #define REG_CTRL1               0x0c
  32 #define REG_STATUS              0x10
  33 #define REG_CTRL2               0x14
  34 #define REG_CLOCK               0x18
  35 #define REG_USER                0x1c
  36 #define REG_USER1               0x20
  37 #define REG_USER2               0x24
  38 #define REG_USER3               0x28
  39 #define REG_USER4               0x2c
  40 #define REG_SLAVE               0x30
  41 #define REG_SLAVE1              0x34
  42 #define REG_SLAVE2              0x38
  43 #define REG_SLAVE3              0x3c
  44 #define REG_C0                  0x40
  45 #define REG_B8                  0x60
  46 #define REG_MAX                 0x7c
  47
  48 /* register fields */
  49 #define CMD_USER                BIT(18)
  50 #define CTRL_ENABLE_AHB         BIT(17)
  51 #define CLOCK_SOURCE            BIT(31)
  52 #define CLOCK_DIV_SHIFT         12
  53 #define CLOCK_DIV_MASK          (0x3f << CLOCK_DIV_SHIFT)
  54 #define CLOCK_CNT_HIGH_SHIFT    6
  55 #define CLOCK_CNT_HIGH_MASK     (0x3f << CLOCK_CNT_HIGH_SHIFT)
  56 #define CLOCK_CNT_LOW_SHIFT     0
  57 #define CLOCK_CNT_LOW_MASK      (0x3f << CLOCK_CNT_LOW_SHIFT)
  58 #define USER_DIN_EN_MS          BIT(0)
  59 #define USER_CMP_MODE           BIT(2)
  60 #define USER_UC_DOUT_SEL        BIT(27)
  61 #define USER_UC_DIN_SEL         BIT(28)
  62 #define USER_UC_MASK            ((BIT(5) - 1) << 27)
  63 #define USER1_BN_UC_DOUT_SHIFT  17
  64 #define USER1_BN_UC_DOUT_MASK   (0xff << 16)
  65 #define USER1_BN_UC_DIN_SHIFT   8
  66 #define USER1_BN_UC_DIN_MASK    (0xff << 8)
  67 #define USER4_CS_ACT            BIT(30)
  68 #define SLAVE_TRST_DONE         BIT(4)
  69 #define SLAVE_OP_MODE           BIT(30)
  70 #define SLAVE_SW_RST            BIT(31)
  71
  72 #define SPIFC_BUFFER_SIZE       64
  73
  74 /**
  75  * struct meson_spifc
  76  * @master:     the SPI master
  77  * @regmap:     regmap for device registers
  78  * @clk:        input clock of the built-in baud rate generator
  79  * @device:     the device structure
  80  */
  81 struct meson_spifc {
  82         struct spi_master *master;
  83         struct regmap *regmap;
  84         struct clk *clk;
  85         struct device *dev;
  86 };
  87
  88 static const struct regmap_config spifc_regmap_config = {
  89         .reg_bits = 32,
  90         .val_bits = 32,
  91         .reg_stride = 4,
  92         .max_register = REG_MAX,
  93 };
  94
  95 /**
  96  * meson_spifc_wait_ready() - wait for the current operation to terminate
  97  * @spifc:      the Meson SPI device
  98  * Return:      0 on success, a negative value on error
  99  */
 100 static int meson_spifc_wait_ready(struct meson_spifc *spifc)
 101 {
 102         unsigned long deadline = jiffies + msecs_to_jiffies(5);
 103         u32 data;
 104
 105         do {
 106                 regmap_read(spifc->regmap, REG_SLAVE, &data);
 107                 if (data & SLAVE_TRST_DONE)
 108                         return 0;
 109                 cond_resched();
 110         } while (!time_after(jiffies, deadline));
 111
 112         return -ETIMEDOUT;
 113 }
 114
 115 /**
 116  * meson_spifc_drain_buffer() - copy data from device buffer to memory
 117  * @spifc:      the Meson SPI device
 118  * @buf:        the destination buffer
 119  * @len:        number of bytes to copy
 120  */
 121 static void meson_spifc_drain_buffer(struct meson_spifc *spifc, u8 *buf,
 122                                      int len)
 123 {
 124         u32 data;
 125         int i = 0;
 126
 127         while (i < len) {
 128                 regmap_read(spifc->regmap, REG_C0 + i, &data);
 129
 130                 if (len - i >= 4) {
 131                         *((u32 *)buf) = data;
 132                         buf += 4;
 133                 } else {
 134                         memcpy(buf, &data, len - i);
 135                         break;
 136                 }
 137                 i += 4;
 138         }
 139 }
 140
 141 /**
 142  * meson_spifc_fill_buffer() - copy data from memory to device buffer
 143  * @spifc:      the Meson SPI device
 144  * @buf:        the source buffer
 145  * @len:        number of bytes to copy
 146  */
 147 static void meson_spifc_fill_buffer(struct meson_spifc *spifc, const u8 *buf,
 148                                     int len)
 149 {
 150         u32 data;
 151         int i = 0;
 152
 153         while (i < len) {
 154                 if (len - i >= 4)
 155                         data = *(u32 *)buf;
 156                 else
 157                         memcpy(&data, buf, len - i);
 158
 159                 regmap_write(spifc->regmap, REG_C0 + i, data);
 160
 161                 buf += 4;
 162                 i += 4;
 163         }
 164 }
 165
 166 /**
 167  * meson_spifc_setup_speed() - program the clock divider
 168  * @spifc:      the Meson SPI device
 169  * @speed:      desired speed in Hz
 170  */
 171 static void meson_spifc_setup_speed(struct meson_spifc *spifc, u32 speed)
 172 {
 173         unsigned long parent, value;
 174         int n;
 175
 176         parent = clk_get_rate(spifc->clk);
 177         n = max_t(int, parent / speed - 1, 1);
 178
 179         dev_dbg(spifc->dev, "parent %lu, speed %u, n %d\n", parent,
 180                 speed, n);
 181
 182         value = (n << CLOCK_DIV_SHIFT) & CLOCK_DIV_MASK;
 183         value |= (n << CLOCK_CNT_LOW_SHIFT) & CLOCK_CNT_LOW_MASK;
 184         value |= (((n + 1) / 2 - 1) << CLOCK_CNT_HIGH_SHIFT) &
 185                 CLOCK_CNT_HIGH_MASK;
 186
 187         regmap_write(spifc->regmap, REG_CLOCK, value);
 188 }
 189
 190 /**
 191  * meson_spifc_txrx() - transfer a chunk of data
 192  * @spifc:      the Meson SPI device
 193  * @xfer:       the current SPI transfer
 194  * @offset:     offset of the data to transfer
 195  * @len:        length of the data to transfer
 196  * @last_xfer:  whether this is the last transfer of the message
 197  * @last_chunk: whether this is the last chunk of the transfer
 198  * Return:      0 on success, a negative value on error
 199  */
 200 static int meson_spifc_txrx(struct meson_spifc *spifc,
 201                             struct spi_transfer *xfer,
 202                             int offset, int len, bool last_xfer,
 203                             bool last_chunk)
 204 {
 205         bool keep_cs = true;
 206         int ret;
 207
 208         if (xfer->tx_buf)
 209                 meson_spifc_fill_buffer(spifc, xfer->tx_buf + offset, len);
 210
 211         /* enable DOUT stage */
 212         regmap_update_bits(spifc->regmap, REG_USER, USER_UC_MASK,
 213                            USER_UC_DOUT_SEL);
 214         regmap_write(spifc->regmap, REG_USER1,
 215                      (8 * len - 1) << USER1_BN_UC_DOUT_SHIFT);
 216
 217         /* enable data input during DOUT */
 218         regmap_update_bits(spifc->regmap, REG_USER, USER_DIN_EN_MS,
 219                            USER_DIN_EN_MS);
 220
 221         if (last_chunk) {
 222                 if (last_xfer)
 223                         keep_cs = xfer->cs_change;
 224                 else
 225                         keep_cs = !xfer->cs_change;
 226         }
 227
 228         regmap_update_bits(spifc->regmap, REG_USER4, USER4_CS_ACT,
 229                            keep_cs ? USER4_CS_ACT : 0);
 230
 231         /* clear transition done bit */
 232         regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_TRST_DONE, 0);
 233         /* start transfer */
 234         regmap_update_bits(spifc->regmap, REG_CMD, CMD_USER, CMD_USER);
 235
 236         ret = meson_spifc_wait_ready(spifc);
 237
 238         if (!ret && xfer->rx_buf)
 239                 meson_spifc_drain_buffer(spifc, xfer->rx_buf + offset, len);
 240
 241         return ret;
 242 }
 243
 244 /**
 245  * meson_spifc_transfer_one() - perform a single transfer
 246  * @master:     the SPI master
 247  * @spi:        the SPI device
 248  * @xfer:       the current SPI transfer
 249  * Return:      0 on success, a negative value on error
 250  */
 251 static int meson_spifc_transfer_one(struct spi_master *master,
 252                                     struct spi_device *spi,
 253                                     struct spi_transfer *xfer)
 254 {
 255         struct meson_spifc *spifc = spi_master_get_devdata(master);
 256         int len, done = 0, ret = 0;
 257
 258         meson_spifc_setup_speed(spifc, xfer->speed_hz);
 259
 260         regmap_update_bits(spifc->regmap, REG_CTRL, CTRL_ENABLE_AHB, 0);
 261
 262         while (done < xfer->len && !ret) {
 263                 len = min_t(int, xfer->len - done, SPIFC_BUFFER_SIZE);
 264                 ret = meson_spifc_txrx(spifc, xfer, done, len,
 265                                        spi_transfer_is_last(master, xfer),
 266                                        done + len >= xfer->len);
 267                 done += len;
 268         }
 269
 270         regmap_update_bits(spifc->regmap, REG_CTRL, CTRL_ENABLE_AHB,
 271                            CTRL_ENABLE_AHB);
 272
 273         return ret;
 274 }
 275
 276 /**
 277  * meson_spifc_hw_init() - reset and initialize the SPI controller
 278  * @spifc:      the Meson SPI device
 279  */
 280 static void meson_spifc_hw_init(struct meson_spifc *spifc)
 281 {
 282         /* reset device */
 283         regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_SW_RST,
 284                            SLAVE_SW_RST);
 285         /* disable compatible mode */
 286         regmap_update_bits(spifc->regmap, REG_USER, USER_CMP_MODE, 0);
 287         /* set master mode */
 288         regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_OP_MODE, 0);
 289 }
 290
 291 static int meson_spifc_probe(struct platform_device *pdev)
 292 {
 293         struct spi_master *master;
 294         struct meson_spifc *spifc;
 295         struct resource *res;
 296         void __iomem *base;
 297         unsigned int rate;
 298         int ret = 0;
 299
 300         master = spi_alloc_master(&pdev->dev, sizeof(struct meson_spifc));
 301         if (!master)
 302                 return -ENOMEM;
 303
 304         platform_set_drvdata(pdev, master);
 305
 306         spifc = spi_master_get_devdata(master);
 307         spifc->dev = &pdev->dev;
 308
 309         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 310         base = devm_ioremap_resource(spifc->dev, res);
 311         if (IS_ERR(base)) {
 312                 ret = PTR_ERR(base);
 313                 goto out_err;
 314         }
 315
 316         spifc->regmap = devm_regmap_init_mmio(spifc->dev, base,
 317                                               &spifc_regmap_config);
 318         if (IS_ERR(spifc->regmap)) {
 319                 ret = PTR_ERR(spifc->regmap);
 320                 goto out_err;
 321         }
 322
 323         spifc->clk = devm_clk_get(spifc->dev, NULL);
 324         if (IS_ERR(spifc->clk)) {
 325                 dev_err(spifc->dev, "missing clock\n");
 326                 ret = PTR_ERR(spifc->clk);
 327                 goto out_err;
 328         }
 329
 330         ret = clk_prepare_enable(spifc->clk);
 331         if (ret) {
 332                 dev_err(spifc->dev, "can't prepare clock\n");
 333                 goto out_err;
 334         }
 335
 336         rate = clk_get_rate(spifc->clk);
 337
 338         master->num_chipselect = 1;
 339         master->dev.of_node = pdev->dev.of_node;
 340         master->bits_per_word_mask = SPI_BPW_MASK(8);
 341         master->auto_runtime_pm = true;
 342         master->transfer_one = meson_spifc_transfer_one;
 343         master->min_speed_hz = rate >> 6;
 344         master->max_speed_hz = rate >> 1;
 345
 346         meson_spifc_hw_init(spifc);
 347
 348         pm_runtime_set_active(spifc->dev);
 349         pm_runtime_enable(spifc->dev);
 350
 351         ret = devm_spi_register_master(spifc->dev, master);
 352         if (ret) {
 353                 dev_err(spifc->dev, "failed to register spi master\n");
 354                 goto out_clk;
 355         }
 356
 357         return 0;
 358 out_clk:
 359         clk_disable_unprepare(spifc->clk);
 360 out_err:
 361         spi_master_put(master);
 362         return ret;
 363 }
 364
 365 static int meson_spifc_remove(struct platform_device *pdev)
 366 {
 367         struct spi_master *master = platform_get_drvdata(pdev);
 368         struct meson_spifc *spifc = spi_master_get_devdata(master);
 369
 370         pm_runtime_get_sync(&pdev->dev);
 371         clk_disable_unprepare(spifc->clk);
 372         pm_runtime_disable(&pdev->dev);
 373
 374         return 0;
 375 }
 376
 377 #ifdef CONFIG_PM_SLEEP
 378 static int meson_spifc_suspend(struct device *dev)
 379 {
 380         struct spi_master *master = dev_get_drvdata(dev);
 381         struct meson_spifc *spifc = spi_master_get_devdata(master);
 382         int ret;
 383
 384         ret = spi_master_suspend(master);
 385         if (ret)
 386                 return ret;
 387
 388         if (!pm_runtime_suspended(dev))
 389                 clk_disable_unprepare(spifc->clk);
 390
 391         return 0;
 392 }
 393
 394 static int meson_spifc_resume(struct device *dev)
 395 {
 396         struct spi_master *master = dev_get_drvdata(dev);
 397         struct meson_spifc *spifc = spi_master_get_devdata(master);
 398         int ret;
 399
 400         if (!pm_runtime_suspended(dev)) {
 401                 ret = clk_prepare_enable(spifc->clk);
 402                 if (ret)
 403                         return ret;
 404         }
 405
 406         meson_spifc_hw_init(spifc);
 407
 408         ret = spi_master_resume(master);
 409         if (ret)
 410                 clk_disable_unprepare(spifc->clk);
 411
 412         return ret;
 413 }
 414 #endif /* CONFIG_PM_SLEEP */
 415
 416 #ifdef CONFIG_PM
 417 static int meson_spifc_runtime_suspend(struct device *dev)
 418 {
 419         struct spi_master *master = dev_get_drvdata(dev);
 420         struct meson_spifc *spifc = spi_master_get_devdata(master);
 421
 422         clk_disable_unprepare(spifc->clk);
 423
 424         return 0;
 425 }
 426
 427 static int meson_spifc_runtime_resume(struct device *dev)
 428 {
 429         struct spi_master *master = dev_get_drvdata(dev);
 430         struct meson_spifc *spifc = spi_master_get_devdata(master);
 431
 432         return clk_prepare_enable(spifc->clk);
 433 }
 434 #endif /* CONFIG_PM */
 435
 436 static const struct dev_pm_ops meson_spifc_pm_ops = {
 437         SET_SYSTEM_SLEEP_PM_OPS(meson_spifc_suspend, meson_spifc_resume)
 438         SET_RUNTIME_PM_OPS(meson_spifc_runtime_suspend,
 439                            meson_spifc_runtime_resume,
 440                            NULL)
 441 };
 442
 443 static const struct of_device_id meson_spifc_dt_match[] = {
 444         { .compatible = "amlogic,meson6-spifc", },
 445         { .compatible = "amlogic,meson-gxbb-spifc", },
 446         { },
 447 };
 448 MODULE_DEVICE_TABLE(of, meson_spifc_dt_match);
 449
 450 static struct platform_driver meson_spifc_driver = {
 451         .probe  = meson_spifc_probe,
 452         .remove = meson_spifc_remove,
 453         .driver = {
 454                 .name           = "meson-spifc",
 455                 .of_match_table = of_match_ptr(meson_spifc_dt_match),
 456                 .pm             = &meson_spifc_pm_ops,
 457         },
 458 };
 459
 460 module_platform_driver(meson_spifc_driver);
 461
 462 MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
 463 MODULE_DESCRIPTION("Amlogic Meson SPIFC driver");
 464 MODULE_LICENSE("GPL v2");