drivers/spi/spi-pxa2xx-dma.c

   1 /*
   2  * PXA2xx SPI DMA engine support.
   3  *
   4  * Copyright (C) 2013, Intel Corporation
   5  * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/device.h>
  13 #include <linux/dma-mapping.h>
  14 #include <linux/dmaengine.h>
  15 #include <linux/pxa2xx_ssp.h>
  16 #include <linux/scatterlist.h>
  17 #include <linux/sizes.h>
  18 #include <linux/spi/spi.h>
  19 #include <linux/spi/pxa2xx_spi.h>
  20
  21 #include "spi-pxa2xx.h"
  22
  23 static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data,
  24                                              bool error)
  25 {
  26         struct spi_message *msg = drv_data->master->cur_msg;
  27
  28         /*
  29          * It is possible that one CPU is handling ROR interrupt and other
  30          * just gets DMA completion. Calling pump_transfers() twice for the
  31          * same transfer leads to problems thus we prevent concurrent calls
  32          * by using ->dma_running.
  33          */
  34         if (atomic_dec_and_test(&drv_data->dma_running)) {
  35                 /*
  36                  * If the other CPU is still handling the ROR interrupt we
  37                  * might not know about the error yet. So we re-check the
  38                  * ROR bit here before we clear the status register.
  39                  */
  40                 if (!error) {
  41                         u32 status = pxa2xx_spi_read(drv_data, SSSR)
  42                                      & drv_data->mask_sr;
  43                         error = status & SSSR_ROR;
  44                 }
  45
  46                 /* Clear status & disable interrupts */
  47                 pxa2xx_spi_write(drv_data, SSCR1,
  48                                  pxa2xx_spi_read(drv_data, SSCR1)
  49                                  & ~drv_data->dma_cr1);
  50                 write_SSSR_CS(drv_data, drv_data->clear_sr);
  51                 if (!pxa25x_ssp_comp(drv_data))
  52                         pxa2xx_spi_write(drv_data, SSTO, 0);
  53
  54                 if (!error) {
  55                         msg->actual_length += drv_data->len;
  56                         msg->state = pxa2xx_spi_next_transfer(drv_data);
  57                 } else {
  58                         /* In case we got an error we disable the SSP now */
  59                         pxa2xx_spi_write(drv_data, SSCR0,
  60                                          pxa2xx_spi_read(drv_data, SSCR0)
  61                                          & ~SSCR0_SSE);
  62
  63                         msg->state = ERROR_STATE;
  64                 }
  65
  66                 tasklet_schedule(&drv_data->pump_transfers);
  67         }
  68 }
  69
  70 static void pxa2xx_spi_dma_callback(void *data)
  71 {
  72         pxa2xx_spi_dma_transfer_complete(data, false);
  73 }
  74
  75 static struct dma_async_tx_descriptor *
  76 pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
  77                            enum dma_transfer_direction dir)
  78 {
  79         struct chip_data *chip =
  80                 spi_get_ctldata(drv_data->master->cur_msg->spi);
  81         struct spi_transfer *xfer = drv_data->cur_transfer;
  82         enum dma_slave_buswidth width;
  83         struct dma_slave_config cfg;
  84         struct dma_chan *chan;
  85         struct sg_table *sgt;
  86         int ret;
  87
  88         switch (drv_data->n_bytes) {
  89         case 1:
  90                 width = DMA_SLAVE_BUSWIDTH_1_BYTE;
  91                 break;
  92         case 2:
  93                 width = DMA_SLAVE_BUSWIDTH_2_BYTES;
  94                 break;
  95         default:
  96                 width = DMA_SLAVE_BUSWIDTH_4_BYTES;
  97                 break;
  98         }
  99
 100         memset(&cfg, 0, sizeof(cfg));
 101         cfg.direction = dir;
 102
 103         if (dir == DMA_MEM_TO_DEV) {
 104                 cfg.dst_addr = drv_data->ssdr_physical;
 105                 cfg.dst_addr_width = width;
 106                 cfg.dst_maxburst = chip->dma_burst_size;
 107
 108                 sgt = &xfer->tx_sg;
 109                 chan = drv_data->master->dma_tx;
 110         } else {
 111                 cfg.src_addr = drv_data->ssdr_physical;
 112                 cfg.src_addr_width = width;
 113                 cfg.src_maxburst = chip->dma_burst_size;
 114
 115                 sgt = &xfer->rx_sg;
 116                 chan = drv_data->master->dma_rx;
 117         }
 118
 119         ret = dmaengine_slave_config(chan, &cfg);
 120         if (ret) {
 121                 dev_warn(&drv_data->pdev->dev, "DMA slave config failed\n");
 122                 return NULL;
 123         }
 124
 125         return dmaengine_prep_slave_sg(chan, sgt->sgl, sgt->nents, dir,
 126                                        DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 127 }
 128
 129 irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data)
 130 {
 131         u32 status;
 132
 133         status = pxa2xx_spi_read(drv_data, SSSR) & drv_data->mask_sr;
 134         if (status & SSSR_ROR) {
 135                 dev_err(&drv_data->pdev->dev, "FIFO overrun\n");
 136
 137                 dmaengine_terminate_async(drv_data->master->dma_rx);
 138                 dmaengine_terminate_async(drv_data->master->dma_tx);
 139
 140                 pxa2xx_spi_dma_transfer_complete(drv_data, true);
 141                 return IRQ_HANDLED;
 142         }
 143
 144         return IRQ_NONE;
 145 }
 146
 147 int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst)
 148 {
 149         struct dma_async_tx_descriptor *tx_desc, *rx_desc;
 150         int err;
 151
 152         tx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_MEM_TO_DEV);
 153         if (!tx_desc) {
 154                 dev_err(&drv_data->pdev->dev,
 155                         "failed to get DMA TX descriptor\n");
 156                 err = -EBUSY;
 157                 goto err_tx;
 158         }
 159
 160         rx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_DEV_TO_MEM);
 161         if (!rx_desc) {
 162                 dev_err(&drv_data->pdev->dev,
 163                         "failed to get DMA RX descriptor\n");
 164                 err = -EBUSY;
 165                 goto err_rx;
 166         }
 167
 168         /* We are ready when RX completes */
 169         rx_desc->callback = pxa2xx_spi_dma_callback;
 170         rx_desc->callback_param = drv_data;
 171
 172         dmaengine_submit(rx_desc);
 173         dmaengine_submit(tx_desc);
 174         return 0;
 175
 176 err_rx:
 177         dmaengine_terminate_async(drv_data->master->dma_tx);
 178 err_tx:
 179         return err;
 180 }
 181
 182 void pxa2xx_spi_dma_start(struct driver_data *drv_data)
 183 {
 184         dma_async_issue_pending(drv_data->master->dma_rx);
 185         dma_async_issue_pending(drv_data->master->dma_tx);
 186
 187         atomic_set(&drv_data->dma_running, 1);
 188 }
 189
 190 int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
 191 {
 192         struct pxa2xx_spi_master *pdata = drv_data->master_info;
 193         struct device *dev = &drv_data->pdev->dev;
 194         struct spi_master *master = drv_data->master;
 195         dma_cap_mask_t mask;
 196
 197         dma_cap_zero(mask);
 198         dma_cap_set(DMA_SLAVE, mask);
 199
 200         master->dma_tx = dma_request_slave_channel_compat(mask,
 201                                 pdata->dma_filter, pdata->tx_param, dev, "tx");
 202         if (!master->dma_tx)
 203                 return -ENODEV;
 204
 205         master->dma_rx = dma_request_slave_channel_compat(mask,
 206                                 pdata->dma_filter, pdata->rx_param, dev, "rx");
 207         if (!master->dma_rx) {
 208                 dma_release_channel(master->dma_tx);
 209                 master->dma_tx = NULL;
 210                 return -ENODEV;
 211         }
 212
 213         return 0;
 214 }
 215
 216 void pxa2xx_spi_dma_release(struct driver_data *drv_data)
 217 {
 218         struct spi_master *master = drv_data->master;
 219
 220         if (master->dma_rx) {
 221                 dmaengine_terminate_sync(master->dma_rx);
 222                 dma_release_channel(master->dma_rx);
 223                 master->dma_rx = NULL;
 224         }
 225         if (master->dma_tx) {
 226                 dmaengine_terminate_sync(master->dma_tx);
 227                 dma_release_channel(master->dma_tx);
 228                 master->dma_tx = NULL;
 229         }
 230 }
 231
 232 int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
 233                                            struct spi_device *spi,
 234                                            u8 bits_per_word, u32 *burst_code,
 235                                            u32 *threshold)
 236 {
 237         struct pxa2xx_spi_chip *chip_info = spi->controller_data;
 238
 239         /*
 240          * If the DMA burst size is given in chip_info we use that,
 241          * otherwise we use the default. Also we use the default FIFO
 242          * thresholds for now.
 243          */
 244         *burst_code = chip_info ? chip_info->dma_burst_size : 1;
 245         *threshold = SSCR1_RxTresh(RX_THRESH_DFLT)
 246                    | SSCR1_TxTresh(TX_THRESH_DFLT);
 247
 248         return 0;
 249 }