2 * Copyright 2015 IBM Corp.
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version
7 * 2 of the License, or (at your option) any later version.
13 #include <linux/pci.h>
14 #include <linux/poll.h>
15 #include <linux/interrupt.h>
16 #include <uapi/misc/cxl.h>
19 * This documents the in kernel API for driver to use CXL. It allows kernel
20 * drivers to bind to AFUs using an AFU configuration record exposed as a PCI
21 * configuration record.
23 * This API enables control over AFU and contexts which can't be part of the
24 * generic PCI API. This API is agnostic to the actual AFU.
27 /* Get the AFU associated with a pci_dev */
28 struct cxl_afu
*cxl_pci_to_afu(struct pci_dev
*dev
);
30 /* Get the AFU conf record number associated with a pci_dev */
31 unsigned int cxl_pci_to_cfg_record(struct pci_dev
*dev
);
33 /* Get the physical device (ie. the PCIe card) which the AFU is attached */
34 struct device
*cxl_get_phys_dev(struct pci_dev
*dev
);
38 * Context lifetime overview:
40 * An AFU context may be inited and then started and stoppped multiple times
41 * before it's released. ie.
42 * - cxl_dev_context_init()
43 * - cxl_start_context()
44 * - cxl_stop_context()
45 * - cxl_start_context()
46 * - cxl_stop_context()
48 * - cxl_release_context()
49 * Once released, a context can't be started again.
51 * One context is inited by the cxl driver for every pci_dev. This is to be
52 * used as a default kernel context. cxl_get_context() will get this
53 * context. This context will be released by PCI hot unplug, so doesn't need to
54 * be released explicitly by drivers.
56 * Additional kernel contexts may be inited using cxl_dev_context_init().
57 * These must be released using cxl_context_detach().
59 * Once a context has been inited, IRQs may be configured. Firstly these IRQs
60 * must be allocated (cxl_allocate_afu_irqs()), then individually mapped to
61 * specific handlers (cxl_map_afu_irq()).
63 * These IRQs can be unmapped (cxl_unmap_afu_irq()) and finally released
64 * (cxl_free_afu_irqs()).
66 * The AFU can be reset (cxl_afu_reset()). This will cause the PSL/AFU
67 * hardware to lose track of all contexts. It's upto the caller of
68 * cxl_afu_reset() to restart these contexts.
72 * On pci_enabled_device(), the cxl driver will init a single cxl context for
73 * use by the driver. It doesn't start this context (as that will likely
74 * generate DMA traffic for most AFUs).
76 * This gets the default context associated with this pci_dev. This context
77 * doesn't need to be released as this will be done by the PCI subsystem on hot
80 struct cxl_context
*cxl_get_context(struct pci_dev
*dev
);
82 * Allocate and initalise a context associated with a AFU PCI device. This
83 * doesn't start the context in the AFU.
85 struct cxl_context
*cxl_dev_context_init(struct pci_dev
*dev
);
87 * Release and free a context. Context should be stopped before calling.
89 int cxl_release_context(struct cxl_context
*ctx
);
92 * Allocate AFU interrupts for this context. num=0 will allocate the default
93 * for this AFU as given in the AFU descriptor. This number doesn't include the
94 * interrupt 0 (CAIA defines AFU IRQ 0 for page faults). Each interrupt to be
95 * used must map a handler with cxl_map_afu_irq.
97 int cxl_allocate_afu_irqs(struct cxl_context
*cxl
, int num
);
98 /* Free allocated interrupts */
99 void cxl_free_afu_irqs(struct cxl_context
*cxl
);
102 * Map a handler for an AFU interrupt associated with a particular context. AFU
103 * IRQS numbers start from 1 (CAIA defines AFU IRQ 0 for page faults). cookie
104 * is private data is that will be provided to the interrupt handler.
106 int cxl_map_afu_irq(struct cxl_context
*cxl
, int num
,
107 irq_handler_t handler
, void *cookie
, char *name
);
108 /* unmap mapped IRQ handlers */
109 void cxl_unmap_afu_irq(struct cxl_context
*cxl
, int num
, void *cookie
);
112 * Start work on the AFU. This starts an cxl context and associates it with a
113 * task. task == NULL will make it a kernel context.
115 int cxl_start_context(struct cxl_context
*ctx
, u64 wed
,
116 struct task_struct
*task
);
118 * Stop a context and remove it from the PSL
120 int cxl_stop_context(struct cxl_context
*ctx
);
123 int cxl_afu_reset(struct cxl_context
*ctx
);
126 * Set a context as a master context.
127 * This sets the default problem space area mapped as the full space, rather
128 * than just the per context area (for slaves).
130 void cxl_set_master(struct cxl_context
*ctx
);
133 * Map and unmap the AFU Problem Space area. The amount and location mapped
134 * depends on if this context is a master or slave.
136 void __iomem
*cxl_psa_map(struct cxl_context
*ctx
);
137 void cxl_psa_unmap(void __iomem
*addr
);
139 /* Get the process element for this context */
140 int cxl_process_element(struct cxl_context
*ctx
);
144 * These calls allow drivers to create their own file descriptors and make them
145 * identical to the cxl file descriptor user API. An example use case:
147 * struct file_operations cxl_my_fops = {};
149 * // Init the context
150 * ctx = cxl_dev_context_init(dev);
152 * return PTR_ERR(ctx);
153 * // Create and attach a new file descriptor to my file ops
154 * file = cxl_get_fd(ctx, &cxl_my_fops, &fd);
156 * rc = cxl_start_work(ctx, &work.work);
162 * // No error paths after installing the fd
163 * fd_install(fd, file);
166 * This inits a context, and gets a file descriptor and associates some file
167 * ops to that file descriptor. If the file ops are blank, the cxl driver will
168 * fill them in with the default ones that mimic the standard user API. Once
169 * completed, the file descriptor can be installed. Once the file descriptor is
170 * installed, it's visible to the user so no errors must occur past this point.
172 * If cxl_fd_release() file op call is installed, the context will be stopped
173 * and released when the fd is released. Hence the driver won't need to manage
178 * Take a context and associate it with my file ops. Returns the associated
179 * file and file descriptor. Any file ops which are blank are filled in by the
180 * cxl driver with the default ops to mimic the standard API.
182 struct file
*cxl_get_fd(struct cxl_context
*ctx
, struct file_operations
*fops
,
184 /* Get the context associated with this file */
185 struct cxl_context
*cxl_fops_get_context(struct file
*file
);
187 * Start a context associated a struct cxl_ioctl_start_work used by the
188 * standard cxl user API.
190 int cxl_start_work(struct cxl_context
*ctx
,
191 struct cxl_ioctl_start_work
*work
);
193 * Export all the existing fops so drivers can use them
195 int cxl_fd_open(struct inode
*inode
, struct file
*file
);
196 int cxl_fd_release(struct inode
*inode
, struct file
*file
);
197 long cxl_fd_ioctl(struct file
*file
, unsigned int cmd
, unsigned long arg
);
198 int cxl_fd_mmap(struct file
*file
, struct vm_area_struct
*vm
);
199 unsigned int cxl_fd_poll(struct file
*file
, struct poll_table_struct
*poll
);
200 ssize_t
cxl_fd_read(struct file
*file
, char __user
*buf
, size_t count
,
204 * For EEH, a driver may want to assert a PERST will reload the same image
205 * from flash into the FPGA.
207 * This is a property of the entire adapter, not a single AFU, so drivers
208 * should set this property with care!
210 void cxl_perst_reloads_same_image(struct cxl_afu
*afu
,
211 bool perst_reloads_same_image
);
213 #endif /* _MISC_CXL_H */