?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Staging: comedi: Remove pcmmio_private typedef
[linux/fpc-iii.git] / arch / arm / plat-omap / gpio.c
blobd3fa41e3d8c5a79235eb687dc4dc9ae92f330b77
1 /*
2 * linux/arch/arm/plat-omap/gpio.c
3 *
4 * Support functions for OMAP GPIO
5 *
6 * Copyright (C) 2003-2005 Nokia Corporation
7 * Written by Juha Yrjölä <juha.yrjola@nokia.com>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14 #include <linux/init.h>
15 #include <linux/module.h>
16 #include <linux/interrupt.h>
17 #include <linux/sysdev.h>
18 #include <linux/err.h>
19 #include <linux/clk.h>
20 #include <linux/io.h>
21
22 #include <mach/hardware.h>
23 #include <asm/irq.h>
24 #include <mach/irqs.h>
25 #include <mach/gpio.h>
26 #include <asm/mach/irq.h>
27
28 /*
29 * OMAP1510 GPIO registers
30 */
31 #define OMAP1510_GPIO_BASE IO_ADDRESS(0xfffce000)
32 #define OMAP1510_GPIO_DATA_INPUT 0x00
33 #define OMAP1510_GPIO_DATA_OUTPUT 0x04
34 #define OMAP1510_GPIO_DIR_CONTROL 0x08
35 #define OMAP1510_GPIO_INT_CONTROL 0x0c
36 #define OMAP1510_GPIO_INT_MASK 0x10
37 #define OMAP1510_GPIO_INT_STATUS 0x14
38 #define OMAP1510_GPIO_PIN_CONTROL 0x18
39
40 #define OMAP1510_IH_GPIO_BASE 64
41
42 /*
43 * OMAP1610 specific GPIO registers
44 */
45 #define OMAP1610_GPIO1_BASE IO_ADDRESS(0xfffbe400)
46 #define OMAP1610_GPIO2_BASE IO_ADDRESS(0xfffbec00)
47 #define OMAP1610_GPIO3_BASE IO_ADDRESS(0xfffbb400)
48 #define OMAP1610_GPIO4_BASE IO_ADDRESS(0xfffbbc00)
49 #define OMAP1610_GPIO_REVISION 0x0000
50 #define OMAP1610_GPIO_SYSCONFIG 0x0010
51 #define OMAP1610_GPIO_SYSSTATUS 0x0014
52 #define OMAP1610_GPIO_IRQSTATUS1 0x0018
53 #define OMAP1610_GPIO_IRQENABLE1 0x001c
54 #define OMAP1610_GPIO_WAKEUPENABLE 0x0028
55 #define OMAP1610_GPIO_DATAIN 0x002c
56 #define OMAP1610_GPIO_DATAOUT 0x0030
57 #define OMAP1610_GPIO_DIRECTION 0x0034
58 #define OMAP1610_GPIO_EDGE_CTRL1 0x0038
59 #define OMAP1610_GPIO_EDGE_CTRL2 0x003c
60 #define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c
61 #define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8
62 #define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0
63 #define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc
64 #define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8
65 #define OMAP1610_GPIO_SET_DATAOUT 0x00f0
66
67 /*
68 * OMAP730 specific GPIO registers
69 */
70 #define OMAP730_GPIO1_BASE IO_ADDRESS(0xfffbc000)
71 #define OMAP730_GPIO2_BASE IO_ADDRESS(0xfffbc800)
72 #define OMAP730_GPIO3_BASE IO_ADDRESS(0xfffbd000)
73 #define OMAP730_GPIO4_BASE IO_ADDRESS(0xfffbd800)
74 #define OMAP730_GPIO5_BASE IO_ADDRESS(0xfffbe000)
75 #define OMAP730_GPIO6_BASE IO_ADDRESS(0xfffbe800)
76 #define OMAP730_GPIO_DATA_INPUT 0x00
77 #define OMAP730_GPIO_DATA_OUTPUT 0x04
78 #define OMAP730_GPIO_DIR_CONTROL 0x08
79 #define OMAP730_GPIO_INT_CONTROL 0x0c
80 #define OMAP730_GPIO_INT_MASK 0x10
81 #define OMAP730_GPIO_INT_STATUS 0x14
82
83 /*
84 * OMAP850 specific GPIO registers
85 */
86 #define OMAP850_GPIO1_BASE IO_ADDRESS(0xfffbc000)
87 #define OMAP850_GPIO2_BASE IO_ADDRESS(0xfffbc800)
88 #define OMAP850_GPIO3_BASE IO_ADDRESS(0xfffbd000)
89 #define OMAP850_GPIO4_BASE IO_ADDRESS(0xfffbd800)
90 #define OMAP850_GPIO5_BASE IO_ADDRESS(0xfffbe000)
91 #define OMAP850_GPIO6_BASE IO_ADDRESS(0xfffbe800)
92 #define OMAP850_GPIO_DATA_INPUT 0x00
93 #define OMAP850_GPIO_DATA_OUTPUT 0x04
94 #define OMAP850_GPIO_DIR_CONTROL 0x08
95 #define OMAP850_GPIO_INT_CONTROL 0x0c
96 #define OMAP850_GPIO_INT_MASK 0x10
97 #define OMAP850_GPIO_INT_STATUS 0x14
98
99 /*
100 * omap24xx specific GPIO registers
101 */
102 #define OMAP242X_GPIO1_BASE IO_ADDRESS(0x48018000)
103 #define OMAP242X_GPIO2_BASE IO_ADDRESS(0x4801a000)
104 #define OMAP242X_GPIO3_BASE IO_ADDRESS(0x4801c000)
105 #define OMAP242X_GPIO4_BASE IO_ADDRESS(0x4801e000)
106
107 #define OMAP243X_GPIO1_BASE IO_ADDRESS(0x4900C000)
108 #define OMAP243X_GPIO2_BASE IO_ADDRESS(0x4900E000)
109 #define OMAP243X_GPIO3_BASE IO_ADDRESS(0x49010000)
110 #define OMAP243X_GPIO4_BASE IO_ADDRESS(0x49012000)
111 #define OMAP243X_GPIO5_BASE IO_ADDRESS(0x480B6000)
112
113 #define OMAP24XX_GPIO_REVISION 0x0000
114 #define OMAP24XX_GPIO_SYSCONFIG 0x0010
115 #define OMAP24XX_GPIO_SYSSTATUS 0x0014
116 #define OMAP24XX_GPIO_IRQSTATUS1 0x0018
117 #define OMAP24XX_GPIO_IRQSTATUS2 0x0028
118 #define OMAP24XX_GPIO_IRQENABLE2 0x002c
119 #define OMAP24XX_GPIO_IRQENABLE1 0x001c
120 #define OMAP24XX_GPIO_WAKE_EN 0x0020
121 #define OMAP24XX_GPIO_CTRL 0x0030
122 #define OMAP24XX_GPIO_OE 0x0034
123 #define OMAP24XX_GPIO_DATAIN 0x0038
124 #define OMAP24XX_GPIO_DATAOUT 0x003c
125 #define OMAP24XX_GPIO_LEVELDETECT0 0x0040
126 #define OMAP24XX_GPIO_LEVELDETECT1 0x0044
127 #define OMAP24XX_GPIO_RISINGDETECT 0x0048
128 #define OMAP24XX_GPIO_FALLINGDETECT 0x004c
129 #define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050
130 #define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054
131 #define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060
132 #define OMAP24XX_GPIO_SETIRQENABLE1 0x0064
133 #define OMAP24XX_GPIO_CLEARWKUENA 0x0080
134 #define OMAP24XX_GPIO_SETWKUENA 0x0084
135 #define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
136 #define OMAP24XX_GPIO_SETDATAOUT 0x0094
137
138 /*
139 * omap34xx specific GPIO registers
140 */
141
142 #define OMAP34XX_GPIO1_BASE IO_ADDRESS(0x48310000)
143 #define OMAP34XX_GPIO2_BASE IO_ADDRESS(0x49050000)
144 #define OMAP34XX_GPIO3_BASE IO_ADDRESS(0x49052000)
145 #define OMAP34XX_GPIO4_BASE IO_ADDRESS(0x49054000)
146 #define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000)
147 #define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000)
148
149 #define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE)
150
151 struct gpio_bank {
152 void __iomem *base;
153 u16 irq;
154 u16 virtual_irq_start;
155 int method;
156 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
157 u32 suspend_wakeup;
158 u32 saved_wakeup;
159 #endif
160 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
161 u32 non_wakeup_gpios;
162 u32 enabled_non_wakeup_gpios;
163
164 u32 saved_datain;
165 u32 saved_fallingdetect;
166 u32 saved_risingdetect;
167 #endif
168 u32 level_mask;
169 spinlock_t lock;
170 struct gpio_chip chip;
171 struct clk *dbck;
172 };
173
174 #define METHOD_MPUIO 0
175 #define METHOD_GPIO_1510 1
176 #define METHOD_GPIO_1610 2
177 #define METHOD_GPIO_730 3
178 #define METHOD_GPIO_850 4
179 #define METHOD_GPIO_24XX 5
180
181 #ifdef CONFIG_ARCH_OMAP16XX
182 static struct gpio_bank gpio_bank_1610[5] = {
183 { OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO},
184 { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 },
185 { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
186 { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
187 { OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 },
188 };
189 #endif
190
191 #ifdef CONFIG_ARCH_OMAP15XX
192 static struct gpio_bank gpio_bank_1510[2] = {
193 { OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
194 { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 }
195 };
196 #endif
197
198 #ifdef CONFIG_ARCH_OMAP730
199 static struct gpio_bank gpio_bank_730[7] = {
200 { OMAP_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
201 { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 },
202 { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 },
203 { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 },
204 { OMAP730_GPIO4_BASE, INT_730_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 },
205 { OMAP730_GPIO5_BASE, INT_730_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 },
206 { OMAP730_GPIO6_BASE, INT_730_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 },
207 };
208 #endif
209
210 #ifdef CONFIG_ARCH_OMAP850
211 static struct gpio_bank gpio_bank_850[7] = {
212 { OMAP_MPUIO_BASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
213 { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 },
214 { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 },
215 { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 },
216 { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 },
217 { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 },
218 { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 },
219 };
220 #endif
221
222
223 #ifdef CONFIG_ARCH_OMAP24XX
224
225 static struct gpio_bank gpio_bank_242x[4] = {
226 { OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
227 { OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
228 { OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
229 { OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
230 };
231
232 static struct gpio_bank gpio_bank_243x[5] = {
233 { OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
234 { OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
235 { OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
236 { OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
237 { OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
238 };
239
240 #endif
241
242 #ifdef CONFIG_ARCH_OMAP34XX
243 static struct gpio_bank gpio_bank_34xx[6] = {
244 { OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
245 { OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
246 { OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
247 { OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
248 { OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
249 { OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX },
250 };
251
252 #endif
253
254 static struct gpio_bank *gpio_bank;
255 static int gpio_bank_count;
256
257 static inline struct gpio_bank *get_gpio_bank(int gpio)
258 {
259 if (cpu_is_omap15xx()) {
260 if (OMAP_GPIO_IS_MPUIO(gpio))
261 return &gpio_bank[0];
262 return &gpio_bank[1];
263 }
264 if (cpu_is_omap16xx()) {
265 if (OMAP_GPIO_IS_MPUIO(gpio))
266 return &gpio_bank[0];
267 return &gpio_bank[1 + (gpio >> 4)];
268 }
269 if (cpu_is_omap7xx()) {
270 if (OMAP_GPIO_IS_MPUIO(gpio))
271 return &gpio_bank[0];
272 return &gpio_bank[1 + (gpio >> 5)];
273 }
274 if (cpu_is_omap24xx())
275 return &gpio_bank[gpio >> 5];
276 if (cpu_is_omap34xx())
277 return &gpio_bank[gpio >> 5];
278 BUG();
279 return NULL;
280 }
281
282 static inline int get_gpio_index(int gpio)
283 {
284 if (cpu_is_omap7xx())
285 return gpio & 0x1f;
286 if (cpu_is_omap24xx())
287 return gpio & 0x1f;
288 if (cpu_is_omap34xx())
289 return gpio & 0x1f;
290 return gpio & 0x0f;
291 }
292
293 static inline int gpio_valid(int gpio)
294 {
295 if (gpio < 0)
296 return -1;
297 if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) {
298 if (gpio >= OMAP_MAX_GPIO_LINES + 16)
299 return -1;
300 return 0;
301 }
302 if (cpu_is_omap15xx() && gpio < 16)
303 return 0;
304 if ((cpu_is_omap16xx()) && gpio < 64)
305 return 0;
306 if (cpu_is_omap7xx() && gpio < 192)
307 return 0;
308 if (cpu_is_omap24xx() && gpio < 128)
309 return 0;
310 if (cpu_is_omap34xx() && gpio < 160)
311 return 0;
312 return -1;
313 }
314
315 static int check_gpio(int gpio)
316 {
317 if (unlikely(gpio_valid(gpio)) < 0) {
318 printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
319 dump_stack();
320 return -1;
321 }
322 return 0;
323 }
324
325 static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
326 {
327 void __iomem *reg = bank->base;
328 u32 l;
329
330 switch (bank->method) {
331 #ifdef CONFIG_ARCH_OMAP1
332 case METHOD_MPUIO:
333 reg += OMAP_MPUIO_IO_CNTL;
334 break;
335 #endif
336 #ifdef CONFIG_ARCH_OMAP15XX
337 case METHOD_GPIO_1510:
338 reg += OMAP1510_GPIO_DIR_CONTROL;
339 break;
340 #endif
341 #ifdef CONFIG_ARCH_OMAP16XX
342 case METHOD_GPIO_1610:
343 reg += OMAP1610_GPIO_DIRECTION;
344 break;
345 #endif
346 #ifdef CONFIG_ARCH_OMAP730
347 case METHOD_GPIO_730:
348 reg += OMAP730_GPIO_DIR_CONTROL;
349 break;
350 #endif
351 #ifdef CONFIG_ARCH_OMAP850
352 case METHOD_GPIO_850:
353 reg += OMAP850_GPIO_DIR_CONTROL;
354 break;
355 #endif
356 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
357 case METHOD_GPIO_24XX:
358 reg += OMAP24XX_GPIO_OE;
359 break;
360 #endif
361 default:
362 WARN_ON(1);
363 return;
364 }
365 l = __raw_readl(reg);
366 if (is_input)
367 l |= 1 << gpio;
368 else
369 l &= ~(1 << gpio);
370 __raw_writel(l, reg);
371 }
372
373 static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
374 {
375 void __iomem *reg = bank->base;
376 u32 l = 0;
377
378 switch (bank->method) {
379 #ifdef CONFIG_ARCH_OMAP1
380 case METHOD_MPUIO:
381 reg += OMAP_MPUIO_OUTPUT;
382 l = __raw_readl(reg);
383 if (enable)
384 l |= 1 << gpio;
385 else
386 l &= ~(1 << gpio);
387 break;
388 #endif
389 #ifdef CONFIG_ARCH_OMAP15XX
390 case METHOD_GPIO_1510:
391 reg += OMAP1510_GPIO_DATA_OUTPUT;
392 l = __raw_readl(reg);
393 if (enable)
394 l |= 1 << gpio;
395 else
396 l &= ~(1 << gpio);
397 break;
398 #endif
399 #ifdef CONFIG_ARCH_OMAP16XX
400 case METHOD_GPIO_1610:
401 if (enable)
402 reg += OMAP1610_GPIO_SET_DATAOUT;
403 else
404 reg += OMAP1610_GPIO_CLEAR_DATAOUT;
405 l = 1 << gpio;
406 break;
407 #endif
408 #ifdef CONFIG_ARCH_OMAP730
409 case METHOD_GPIO_730:
410 reg += OMAP730_GPIO_DATA_OUTPUT;
411 l = __raw_readl(reg);
412 if (enable)
413 l |= 1 << gpio;
414 else
415 l &= ~(1 << gpio);
416 break;
417 #endif
418 #ifdef CONFIG_ARCH_OMAP850
419 case METHOD_GPIO_850:
420 reg += OMAP850_GPIO_DATA_OUTPUT;
421 l = __raw_readl(reg);
422 if (enable)
423 l |= 1 << gpio;
424 else
425 l &= ~(1 << gpio);
426 break;
427 #endif
428 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
429 case METHOD_GPIO_24XX:
430 if (enable)
431 reg += OMAP24XX_GPIO_SETDATAOUT;
432 else
433 reg += OMAP24XX_GPIO_CLEARDATAOUT;
434 l = 1 << gpio;
435 break;
436 #endif
437 default:
438 WARN_ON(1);
439 return;
440 }
441 __raw_writel(l, reg);
442 }
443
444 static int __omap_get_gpio_datain(int gpio)
445 {
446 struct gpio_bank *bank;
447 void __iomem *reg;
448
449 if (check_gpio(gpio) < 0)
450 return -EINVAL;
451 bank = get_gpio_bank(gpio);
452 reg = bank->base;
453 switch (bank->method) {
454 #ifdef CONFIG_ARCH_OMAP1
455 case METHOD_MPUIO:
456 reg += OMAP_MPUIO_INPUT_LATCH;
457 break;
458 #endif
459 #ifdef CONFIG_ARCH_OMAP15XX
460 case METHOD_GPIO_1510:
461 reg += OMAP1510_GPIO_DATA_INPUT;
462 break;
463 #endif
464 #ifdef CONFIG_ARCH_OMAP16XX
465 case METHOD_GPIO_1610:
466 reg += OMAP1610_GPIO_DATAIN;
467 break;
468 #endif
469 #ifdef CONFIG_ARCH_OMAP730
470 case METHOD_GPIO_730:
471 reg += OMAP730_GPIO_DATA_INPUT;
472 break;
473 #endif
474 #ifdef CONFIG_ARCH_OMAP850
475 case METHOD_GPIO_850:
476 reg += OMAP850_GPIO_DATA_INPUT;
477 break;
478 #endif
479 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
480 case METHOD_GPIO_24XX:
481 reg += OMAP24XX_GPIO_DATAIN;
482 break;
483 #endif
484 default:
485 return -EINVAL;
486 }
487 return (__raw_readl(reg)
488 & (1 << get_gpio_index(gpio))) != 0;
489 }
490
491 #define MOD_REG_BIT(reg, bit_mask, set) \
492 do { \
493 int l = __raw_readl(base + reg); \
494 if (set) l |= bit_mask; \
495 else l &= ~bit_mask; \
496 __raw_writel(l, base + reg); \
497 } while(0)
498
499 void omap_set_gpio_debounce(int gpio, int enable)
500 {
501 struct gpio_bank *bank;
502 void __iomem *reg;
503 unsigned long flags;
504 u32 val, l = 1 << get_gpio_index(gpio);
505
506 if (cpu_class_is_omap1())
507 return;
508
509 bank = get_gpio_bank(gpio);
510 reg = bank->base;
511 reg += OMAP24XX_GPIO_DEBOUNCE_EN;
512
513 spin_lock_irqsave(&bank->lock, flags);
514 val = __raw_readl(reg);
515
516 if (enable && !(val & l))
517 val |= l;
518 else if (!enable && (val & l))
519 val &= ~l;
520 else
521 goto done;
522
523 if (cpu_is_omap34xx()) {
524 if (enable)
525 clk_enable(bank->dbck);
526 else
527 clk_disable(bank->dbck);
528 }
529
530 __raw_writel(val, reg);
531 done:
532 spin_unlock_irqrestore(&bank->lock, flags);
533 }
534 EXPORT_SYMBOL(omap_set_gpio_debounce);
535
536 void omap_set_gpio_debounce_time(int gpio, int enc_time)
537 {
538 struct gpio_bank *bank;
539 void __iomem *reg;
540
541 if (cpu_class_is_omap1())
542 return;
543
544 bank = get_gpio_bank(gpio);
545 reg = bank->base;
546
547 enc_time &= 0xff;
548 reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
549 __raw_writel(enc_time, reg);
550 }
551 EXPORT_SYMBOL(omap_set_gpio_debounce_time);
552
553 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
554 static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
555 int trigger)
556 {
557 void __iomem *base = bank->base;
558 u32 gpio_bit = 1 << gpio;
559
560 MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
561 trigger & IRQ_TYPE_LEVEL_LOW);
562 MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
563 trigger & IRQ_TYPE_LEVEL_HIGH);
564 MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
565 trigger & IRQ_TYPE_EDGE_RISING);
566 MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
567 trigger & IRQ_TYPE_EDGE_FALLING);
568
569 if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
570 if (trigger != 0)
571 __raw_writel(1 << gpio, bank->base
572 + OMAP24XX_GPIO_SETWKUENA);
573 else
574 __raw_writel(1 << gpio, bank->base
575 + OMAP24XX_GPIO_CLEARWKUENA);
576 } else {
577 if (trigger != 0)
578 bank->enabled_non_wakeup_gpios |= gpio_bit;
579 else
580 bank->enabled_non_wakeup_gpios &= ~gpio_bit;
581 }
582
583 bank->level_mask =
584 __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
585 __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
586 }
587 #endif
588
589 static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
590 {
591 void __iomem *reg = bank->base;
592 u32 l = 0;
593
594 switch (bank->method) {
595 #ifdef CONFIG_ARCH_OMAP1
596 case METHOD_MPUIO:
597 reg += OMAP_MPUIO_GPIO_INT_EDGE;
598 l = __raw_readl(reg);
599 if (trigger & IRQ_TYPE_EDGE_RISING)
600 l |= 1 << gpio;
601 else if (trigger & IRQ_TYPE_EDGE_FALLING)
602 l &= ~(1 << gpio);
603 else
604 goto bad;
605 break;
606 #endif
607 #ifdef CONFIG_ARCH_OMAP15XX
608 case METHOD_GPIO_1510:
609 reg += OMAP1510_GPIO_INT_CONTROL;
610 l = __raw_readl(reg);
611 if (trigger & IRQ_TYPE_EDGE_RISING)
612 l |= 1 << gpio;
613 else if (trigger & IRQ_TYPE_EDGE_FALLING)
614 l &= ~(1 << gpio);
615 else
616 goto bad;
617 break;
618 #endif
619 #ifdef CONFIG_ARCH_OMAP16XX
620 case METHOD_GPIO_1610:
621 if (gpio & 0x08)
622 reg += OMAP1610_GPIO_EDGE_CTRL2;
623 else
624 reg += OMAP1610_GPIO_EDGE_CTRL1;
625 gpio &= 0x07;
626 l = __raw_readl(reg);
627 l &= ~(3 << (gpio << 1));
628 if (trigger & IRQ_TYPE_EDGE_RISING)
629 l |= 2 << (gpio << 1);
630 if (trigger & IRQ_TYPE_EDGE_FALLING)
631 l |= 1 << (gpio << 1);
632 if (trigger)
633 /* Enable wake-up during idle for dynamic tick */
634 __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA);
635 else
636 __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
637 break;
638 #endif
639 #ifdef CONFIG_ARCH_OMAP730
640 case METHOD_GPIO_730:
641 reg += OMAP730_GPIO_INT_CONTROL;
642 l = __raw_readl(reg);
643 if (trigger & IRQ_TYPE_EDGE_RISING)
644 l |= 1 << gpio;
645 else if (trigger & IRQ_TYPE_EDGE_FALLING)
646 l &= ~(1 << gpio);
647 else
648 goto bad;
649 break;
650 #endif
651 #ifdef CONFIG_ARCH_OMAP850
652 case METHOD_GPIO_850:
653 reg += OMAP850_GPIO_INT_CONTROL;
654 l = __raw_readl(reg);
655 if (trigger & IRQ_TYPE_EDGE_RISING)
656 l |= 1 << gpio;
657 else if (trigger & IRQ_TYPE_EDGE_FALLING)
658 l &= ~(1 << gpio);
659 else
660 goto bad;
661 break;
662 #endif
663 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
664 case METHOD_GPIO_24XX:
665 set_24xx_gpio_triggering(bank, gpio, trigger);
666 break;
667 #endif
668 default:
669 goto bad;
670 }
671 __raw_writel(l, reg);
672 return 0;
673 bad:
674 return -EINVAL;
675 }
676
677 static int gpio_irq_type(unsigned irq, unsigned type)
678 {
679 struct gpio_bank *bank;
680 unsigned gpio;
681 int retval;
682 unsigned long flags;
683
684 if (!cpu_class_is_omap2() && irq > IH_MPUIO_BASE)
685 gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
686 else
687 gpio = irq - IH_GPIO_BASE;
688
689 if (check_gpio(gpio) < 0)
690 return -EINVAL;
691
692 if (type & ~IRQ_TYPE_SENSE_MASK)
693 return -EINVAL;
694
695 /* OMAP1 allows only only edge triggering */
696 if (!cpu_class_is_omap2()
697 && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
698 return -EINVAL;
699
700 bank = get_irq_chip_data(irq);
701 spin_lock_irqsave(&bank->lock, flags);
702 retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
703 if (retval == 0) {
704 irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
705 irq_desc[irq].status |= type;
706 }
707 spin_unlock_irqrestore(&bank->lock, flags);
708
709 if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
710 __set_irq_handler_unlocked(irq, handle_level_irq);
711 else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
712 __set_irq_handler_unlocked(irq, handle_edge_irq);
713
714 return retval;
715 }
716
717 static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
718 {
719 void __iomem *reg = bank->base;
720
721 switch (bank->method) {
722 #ifdef CONFIG_ARCH_OMAP1
723 case METHOD_MPUIO:
724 /* MPUIO irqstatus is reset by reading the status register,
725 * so do nothing here */
726 return;
727 #endif
728 #ifdef CONFIG_ARCH_OMAP15XX
729 case METHOD_GPIO_1510:
730 reg += OMAP1510_GPIO_INT_STATUS;
731 break;
732 #endif
733 #ifdef CONFIG_ARCH_OMAP16XX
734 case METHOD_GPIO_1610:
735 reg += OMAP1610_GPIO_IRQSTATUS1;
736 break;
737 #endif
738 #ifdef CONFIG_ARCH_OMAP730
739 case METHOD_GPIO_730:
740 reg += OMAP730_GPIO_INT_STATUS;
741 break;
742 #endif
743 #ifdef CONFIG_ARCH_OMAP850
744 case METHOD_GPIO_850:
745 reg += OMAP850_GPIO_INT_STATUS;
746 break;
747 #endif
748 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
749 case METHOD_GPIO_24XX:
750 reg += OMAP24XX_GPIO_IRQSTATUS1;
751 break;
752 #endif
753 default:
754 WARN_ON(1);
755 return;
756 }
757 __raw_writel(gpio_mask, reg);
758
759 /* Workaround for clearing DSP GPIO interrupts to allow retention */
760 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
761 if (cpu_is_omap24xx() || cpu_is_omap34xx())
762 __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2);
763 #endif
764 }
765
766 static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
767 {
768 _clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
769 }
770
771 static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
772 {
773 void __iomem *reg = bank->base;
774 int inv = 0;
775 u32 l;
776 u32 mask;
777
778 switch (bank->method) {
779 #ifdef CONFIG_ARCH_OMAP1
780 case METHOD_MPUIO:
781 reg += OMAP_MPUIO_GPIO_MASKIT;
782 mask = 0xffff;
783 inv = 1;
784 break;
785 #endif
786 #ifdef CONFIG_ARCH_OMAP15XX
787 case METHOD_GPIO_1510:
788 reg += OMAP1510_GPIO_INT_MASK;
789 mask = 0xffff;
790 inv = 1;
791 break;
792 #endif
793 #ifdef CONFIG_ARCH_OMAP16XX
794 case METHOD_GPIO_1610:
795 reg += OMAP1610_GPIO_IRQENABLE1;
796 mask = 0xffff;
797 break;
798 #endif
799 #ifdef CONFIG_ARCH_OMAP730
800 case METHOD_GPIO_730:
801 reg += OMAP730_GPIO_INT_MASK;
802 mask = 0xffffffff;
803 inv = 1;
804 break;
805 #endif
806 #ifdef CONFIG_ARCH_OMAP850
807 case METHOD_GPIO_850:
808 reg += OMAP850_GPIO_INT_MASK;
809 mask = 0xffffffff;
810 inv = 1;
811 break;
812 #endif
813 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
814 case METHOD_GPIO_24XX:
815 reg += OMAP24XX_GPIO_IRQENABLE1;
816 mask = 0xffffffff;
817 break;
818 #endif
819 default:
820 WARN_ON(1);
821 return 0;
822 }
823
824 l = __raw_readl(reg);
825 if (inv)
826 l = ~l;
827 l &= mask;
828 return l;
829 }
830
831 static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
832 {
833 void __iomem *reg = bank->base;
834 u32 l;
835
836 switch (bank->method) {
837 #ifdef CONFIG_ARCH_OMAP1
838 case METHOD_MPUIO:
839 reg += OMAP_MPUIO_GPIO_MASKIT;
840 l = __raw_readl(reg);
841 if (enable)
842 l &= ~(gpio_mask);
843 else
844 l |= gpio_mask;
845 break;
846 #endif
847 #ifdef CONFIG_ARCH_OMAP15XX
848 case METHOD_GPIO_1510:
849 reg += OMAP1510_GPIO_INT_MASK;
850 l = __raw_readl(reg);
851 if (enable)
852 l &= ~(gpio_mask);
853 else
854 l |= gpio_mask;
855 break;
856 #endif
857 #ifdef CONFIG_ARCH_OMAP16XX
858 case METHOD_GPIO_1610:
859 if (enable)
860 reg += OMAP1610_GPIO_SET_IRQENABLE1;
861 else
862 reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
863 l = gpio_mask;
864 break;
865 #endif
866 #ifdef CONFIG_ARCH_OMAP730
867 case METHOD_GPIO_730:
868 reg += OMAP730_GPIO_INT_MASK;
869 l = __raw_readl(reg);
870 if (enable)
871 l &= ~(gpio_mask);
872 else
873 l |= gpio_mask;
874 break;
875 #endif
876 #ifdef CONFIG_ARCH_OMAP850
877 case METHOD_GPIO_850:
878 reg += OMAP850_GPIO_INT_MASK;
879 l = __raw_readl(reg);
880 if (enable)
881 l &= ~(gpio_mask);
882 else
883 l |= gpio_mask;
884 break;
885 #endif
886 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
887 case METHOD_GPIO_24XX:
888 if (enable)
889 reg += OMAP24XX_GPIO_SETIRQENABLE1;
890 else
891 reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
892 l = gpio_mask;
893 break;
894 #endif
895 default:
896 WARN_ON(1);
897 return;
898 }
899 __raw_writel(l, reg);
900 }
901
902 static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
903 {
904 _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable);
905 }
906
907 /*
908 * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
909 * 1510 does not seem to have a wake-up register. If JTAG is connected
910 * to the target, system will wake up always on GPIO events. While
911 * system is running all registered GPIO interrupts need to have wake-up
912 * enabled. When system is suspended, only selected GPIO interrupts need
913 * to have wake-up enabled.
914 */
915 static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
916 {
917 unsigned long flags;
918
919 switch (bank->method) {
920 #ifdef CONFIG_ARCH_OMAP16XX
921 case METHOD_MPUIO:
922 case METHOD_GPIO_1610:
923 spin_lock_irqsave(&bank->lock, flags);
924 if (enable) {
925 bank->suspend_wakeup |= (1 << gpio);
926 enable_irq_wake(bank->irq);
927 } else {
928 disable_irq_wake(bank->irq);
929 bank->suspend_wakeup &= ~(1 << gpio);
930 }
931 spin_unlock_irqrestore(&bank->lock, flags);
932 return 0;
933 #endif
934 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
935 case METHOD_GPIO_24XX:
936 if (bank->non_wakeup_gpios & (1 << gpio)) {
937 printk(KERN_ERR "Unable to modify wakeup on "
938 "non-wakeup GPIO%d\n",
939 (bank - gpio_bank) * 32 + gpio);
940 return -EINVAL;
941 }
942 spin_lock_irqsave(&bank->lock, flags);
943 if (enable) {
944 bank->suspend_wakeup |= (1 << gpio);
945 enable_irq_wake(bank->irq);
946 } else {
947 disable_irq_wake(bank->irq);
948 bank->suspend_wakeup &= ~(1 << gpio);
949 }
950 spin_unlock_irqrestore(&bank->lock, flags);
951 return 0;
952 #endif
953 default:
954 printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n",
955 bank->method);
956 return -EINVAL;
957 }
958 }
959
960 static void _reset_gpio(struct gpio_bank *bank, int gpio)
961 {
962 _set_gpio_direction(bank, get_gpio_index(gpio), 1);
963 _set_gpio_irqenable(bank, gpio, 0);
964 _clear_gpio_irqstatus(bank, gpio);
965 _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
966 }
967
968 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
969 static int gpio_wake_enable(unsigned int irq, unsigned int enable)
970 {
971 unsigned int gpio = irq - IH_GPIO_BASE;
972 struct gpio_bank *bank;
973 int retval;
974
975 if (check_gpio(gpio) < 0)
976 return -ENODEV;
977 bank = get_irq_chip_data(irq);
978 retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
979
980 return retval;
981 }
982
983 static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
984 {
985 struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
986 unsigned long flags;
987
988 spin_lock_irqsave(&bank->lock, flags);
989
990 /* Set trigger to none. You need to enable the desired trigger with
991 * request_irq() or set_irq_type().
992 */
993 _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
994
995 #ifdef CONFIG_ARCH_OMAP15XX
996 if (bank->method == METHOD_GPIO_1510) {
997 void __iomem *reg;
998
999 /* Claim the pin for MPU */
1000 reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
1001 __raw_writel(__raw_readl(reg) | (1 << offset), reg);
1002 }
1003 #endif
1004 spin_unlock_irqrestore(&bank->lock, flags);
1005
1006 return 0;
1007 }
1008
1009 static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
1010 {
1011 struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
1012 unsigned long flags;
1013
1014 spin_lock_irqsave(&bank->lock, flags);
1015 #ifdef CONFIG_ARCH_OMAP16XX
1016 if (bank->method == METHOD_GPIO_1610) {
1017 /* Disable wake-up during idle for dynamic tick */
1018 void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
1019 __raw_writel(1 << offset, reg);
1020 }
1021 #endif
1022 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
1023 if (bank->method == METHOD_GPIO_24XX) {
1024 /* Disable wake-up during idle for dynamic tick */
1025 void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
1026 __raw_writel(1 << offset, reg);
1027 }
1028 #endif
1029 _reset_gpio(bank, bank->chip.base + offset);
1030 spin_unlock_irqrestore(&bank->lock, flags);
1031 }
1032
1033 /*
1034 * We need to unmask the GPIO bank interrupt as soon as possible to
1035 * avoid missing GPIO interrupts for other lines in the bank.
1036 * Then we need to mask-read-clear-unmask the triggered GPIO lines
1037 * in the bank to avoid missing nested interrupts for a GPIO line.
1038 * If we wait to unmask individual GPIO lines in the bank after the
1039 * line's interrupt handler has been run, we may miss some nested
1040 * interrupts.
1041 */
1042 static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
1043 {
1044 void __iomem *isr_reg = NULL;
1045 u32 isr;
1046 unsigned int gpio_irq;
1047 struct gpio_bank *bank;
1048 u32 retrigger = 0;
1049 int unmasked = 0;
1050
1051 desc->chip->ack(irq);
1052
1053 bank = get_irq_data(irq);
1054 #ifdef CONFIG_ARCH_OMAP1
1055 if (bank->method == METHOD_MPUIO)
1056 isr_reg = bank->base + OMAP_MPUIO_GPIO_INT;
1057 #endif
1058 #ifdef CONFIG_ARCH_OMAP15XX
1059 if (bank->method == METHOD_GPIO_1510)
1060 isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
1061 #endif
1062 #if defined(CONFIG_ARCH_OMAP16XX)
1063 if (bank->method == METHOD_GPIO_1610)
1064 isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
1065 #endif
1066 #ifdef CONFIG_ARCH_OMAP730
1067 if (bank->method == METHOD_GPIO_730)
1068 isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
1069 #endif
1070 #ifdef CONFIG_ARCH_OMAP850
1071 if (bank->method == METHOD_GPIO_850)
1072 isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
1073 #endif
1074 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
1075 if (bank->method == METHOD_GPIO_24XX)
1076 isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
1077 #endif
1078 while(1) {
1079 u32 isr_saved, level_mask = 0;
1080 u32 enabled;
1081
1082 enabled = _get_gpio_irqbank_mask(bank);
1083 isr_saved = isr = __raw_readl(isr_reg) & enabled;
1084
1085 if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
1086 isr &= 0x0000ffff;
1087
1088 if (cpu_class_is_omap2()) {
1089 level_mask = bank->level_mask & enabled;
1090 }
1091
1092 /* clear edge sensitive interrupts before handler(s) are
1093 called so that we don't miss any interrupt occurred while
1094 executing them */
1095 _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0);
1096 _clear_gpio_irqbank(bank, isr_saved & ~level_mask);
1097 _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1);
1098
1099 /* if there is only edge sensitive GPIO pin interrupts
1100 configured, we could unmask GPIO bank interrupt immediately */
1101 if (!level_mask && !unmasked) {
1102 unmasked = 1;
1103 desc->chip->unmask(irq);
1104 }
1105
1106 isr |= retrigger;
1107 retrigger = 0;
1108 if (!isr)
1109 break;
1110
1111 gpio_irq = bank->virtual_irq_start;
1112 for (; isr != 0; isr >>= 1, gpio_irq++) {
1113 if (!(isr & 1))
1114 continue;
1115
1116 generic_handle_irq(gpio_irq);
1117 }
1118 }
1119 /* if bank has any level sensitive GPIO pin interrupt
1120 configured, we must unmask the bank interrupt only after
1121 handler(s) are executed in order to avoid spurious bank
1122 interrupt */
1123 if (!unmasked)
1124 desc->chip->unmask(irq);
1125
1126 }
1127
1128 static void gpio_irq_shutdown(unsigned int irq)
1129 {
1130 unsigned int gpio = irq - IH_GPIO_BASE;
1131 struct gpio_bank *bank = get_irq_chip_data(irq);
1132
1133 _reset_gpio(bank, gpio);
1134 }
1135
1136 static void gpio_ack_irq(unsigned int irq)
1137 {
1138 unsigned int gpio = irq - IH_GPIO_BASE;
1139 struct gpio_bank *bank = get_irq_chip_data(irq);
1140
1141 _clear_gpio_irqstatus(bank, gpio);
1142 }
1143
1144 static void gpio_mask_irq(unsigned int irq)
1145 {
1146 unsigned int gpio = irq - IH_GPIO_BASE;
1147 struct gpio_bank *bank = get_irq_chip_data(irq);
1148
1149 _set_gpio_irqenable(bank, gpio, 0);
1150 }
1151
1152 static void gpio_unmask_irq(unsigned int irq)
1153 {
1154 unsigned int gpio = irq - IH_GPIO_BASE;
1155 struct gpio_bank *bank = get_irq_chip_data(irq);
1156 unsigned int irq_mask = 1 << get_gpio_index(gpio);
1157
1158 /* For level-triggered GPIOs, the clearing must be done after
1159 * the HW source is cleared, thus after the handler has run */
1160 if (bank->level_mask & irq_mask) {
1161 _set_gpio_irqenable(bank, gpio, 0);
1162 _clear_gpio_irqstatus(bank, gpio);
1163 }
1164
1165 _set_gpio_irqenable(bank, gpio, 1);
1166 }
1167
1168 static struct irq_chip gpio_irq_chip = {
1169 .name = "GPIO",
1170 .shutdown = gpio_irq_shutdown,
1171 .ack = gpio_ack_irq,
1172 .mask = gpio_mask_irq,
1173 .unmask = gpio_unmask_irq,
1174 .set_type = gpio_irq_type,
1175 .set_wake = gpio_wake_enable,
1176 };
1177
1178 /*---------------------------------------------------------------------*/
1179
1180 #ifdef CONFIG_ARCH_OMAP1
1181
1182 /* MPUIO uses the always-on 32k clock */
1183
1184 static void mpuio_ack_irq(unsigned int irq)
1185 {
1186 /* The ISR is reset automatically, so do nothing here. */
1187 }
1188
1189 static void mpuio_mask_irq(unsigned int irq)
1190 {
1191 unsigned int gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
1192 struct gpio_bank *bank = get_irq_chip_data(irq);
1193
1194 _set_gpio_irqenable(bank, gpio, 0);
1195 }
1196
1197 static void mpuio_unmask_irq(unsigned int irq)
1198 {
1199 unsigned int gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
1200 struct gpio_bank *bank = get_irq_chip_data(irq);
1201
1202 _set_gpio_irqenable(bank, gpio, 1);
1203 }
1204
1205 static struct irq_chip mpuio_irq_chip = {
1206 .name = "MPUIO",
1207 .ack = mpuio_ack_irq,
1208 .mask = mpuio_mask_irq,
1209 .unmask = mpuio_unmask_irq,
1210 .set_type = gpio_irq_type,
1211 #ifdef CONFIG_ARCH_OMAP16XX
1212 /* REVISIT: assuming only 16xx supports MPUIO wake events */
1213 .set_wake = gpio_wake_enable,
1214 #endif
1215 };
1216
1217
1218 #define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO)
1219
1220
1221 #ifdef CONFIG_ARCH_OMAP16XX
1222
1223 #include <linux/platform_device.h>
1224
1225 static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t mesg)
1226 {
1227 struct gpio_bank *bank = platform_get_drvdata(pdev);
1228 void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
1229 unsigned long flags;
1230
1231 spin_lock_irqsave(&bank->lock, flags);
1232 bank->saved_wakeup = __raw_readl(mask_reg);
1233 __raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg);
1234 spin_unlock_irqrestore(&bank->lock, flags);
1235
1236 return 0;
1237 }
1238
1239 static int omap_mpuio_resume_early(struct platform_device *pdev)
1240 {
1241 struct gpio_bank *bank = platform_get_drvdata(pdev);
1242 void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
1243 unsigned long flags;
1244
1245 spin_lock_irqsave(&bank->lock, flags);
1246 __raw_writel(bank->saved_wakeup, mask_reg);
1247 spin_unlock_irqrestore(&bank->lock, flags);
1248
1249 return 0;
1250 }
1251
1252 /* use platform_driver for this, now that there's no longer any
1253 * point to sys_device (other than not disturbing old code).
1254 */
1255 static struct platform_driver omap_mpuio_driver = {
1256 .suspend_late = omap_mpuio_suspend_late,
1257 .resume_early = omap_mpuio_resume_early,
1258 .driver = {
1259 .name = "mpuio",
1260 },
1261 };
1262
1263 static struct platform_device omap_mpuio_device = {
1264 .name = "mpuio",
1265 .id = -1,
1266 .dev = {
1267 .driver = &omap_mpuio_driver.driver,
1268 }
1269 /* could list the /proc/iomem resources */
1270 };
1271
1272 static inline void mpuio_init(void)
1273 {
1274 platform_set_drvdata(&omap_mpuio_device, &gpio_bank_1610[0]);
1275
1276 if (platform_driver_register(&omap_mpuio_driver) == 0)
1277 (void) platform_device_register(&omap_mpuio_device);
1278 }
1279
1280 #else
1281 static inline void mpuio_init(void) {}
1282 #endif /* 16xx */
1283
1284 #else
1285
1286 extern struct irq_chip mpuio_irq_chip;
1287
1288 #define bank_is_mpuio(bank) 0
1289 static inline void mpuio_init(void) {}
1290
1291 #endif
1292
1293 /*---------------------------------------------------------------------*/
1294
1295 /* REVISIT these are stupid implementations! replace by ones that
1296 * don't switch on METHOD_* and which mostly avoid spinlocks
1297 */
1298
1299 static int gpio_input(struct gpio_chip *chip, unsigned offset)
1300 {
1301 struct gpio_bank *bank;
1302 unsigned long flags;
1303
1304 bank = container_of(chip, struct gpio_bank, chip);
1305 spin_lock_irqsave(&bank->lock, flags);
1306 _set_gpio_direction(bank, offset, 1);
1307 spin_unlock_irqrestore(&bank->lock, flags);
1308 return 0;
1309 }
1310
1311 static int gpio_get(struct gpio_chip *chip, unsigned offset)
1312 {
1313 return __omap_get_gpio_datain(chip->base + offset);
1314 }
1315
1316 static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
1317 {
1318 struct gpio_bank *bank;
1319 unsigned long flags;
1320
1321 bank = container_of(chip, struct gpio_bank, chip);
1322 spin_lock_irqsave(&bank->lock, flags);
1323 _set_gpio_dataout(bank, offset, value);
1324 _set_gpio_direction(bank, offset, 0);
1325 spin_unlock_irqrestore(&bank->lock, flags);
1326 return 0;
1327 }
1328
1329 static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
1330 {
1331 struct gpio_bank *bank;
1332 unsigned long flags;
1333
1334 bank = container_of(chip, struct gpio_bank, chip);
1335 spin_lock_irqsave(&bank->lock, flags);
1336 _set_gpio_dataout(bank, offset, value);
1337 spin_unlock_irqrestore(&bank->lock, flags);
1338 }
1339
1340 static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
1341 {
1342 struct gpio_bank *bank;
1343
1344 bank = container_of(chip, struct gpio_bank, chip);
1345 return bank->virtual_irq_start + offset;
1346 }
1347
1348 /*---------------------------------------------------------------------*/
1349
1350 static int initialized;
1351 #if !defined(CONFIG_ARCH_OMAP3)
1352 static struct clk * gpio_ick;
1353 #endif
1354
1355 #if defined(CONFIG_ARCH_OMAP2)
1356 static struct clk * gpio_fck;
1357 #endif
1358
1359 #if defined(CONFIG_ARCH_OMAP2430)
1360 static struct clk * gpio5_ick;
1361 static struct clk * gpio5_fck;
1362 #endif
1363
1364 #if defined(CONFIG_ARCH_OMAP3)
1365 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
1366 #endif
1367
1368 /* This lock class tells lockdep that GPIO irqs are in a different
1369 * category than their parents, so it won't report false recursion.
1370 */
1371 static struct lock_class_key gpio_lock_class;
1372
1373 static int __init _omap_gpio_init(void)
1374 {
1375 int i;
1376 int gpio = 0;
1377 struct gpio_bank *bank;
1378 char clk_name[11];
1379
1380 initialized = 1;
1381
1382 #if defined(CONFIG_ARCH_OMAP1)
1383 if (cpu_is_omap15xx()) {
1384 gpio_ick = clk_get(NULL, "arm_gpio_ck");
1385 if (IS_ERR(gpio_ick))
1386 printk("Could not get arm_gpio_ck\n");
1387 else
1388 clk_enable(gpio_ick);
1389 }
1390 #endif
1391 #if defined(CONFIG_ARCH_OMAP2)
1392 if (cpu_class_is_omap2()) {
1393 gpio_ick = clk_get(NULL, "gpios_ick");
1394 if (IS_ERR(gpio_ick))
1395 printk("Could not get gpios_ick\n");
1396 else
1397 clk_enable(gpio_ick);
1398 gpio_fck = clk_get(NULL, "gpios_fck");
1399 if (IS_ERR(gpio_fck))
1400 printk("Could not get gpios_fck\n");
1401 else
1402 clk_enable(gpio_fck);
1403
1404 /*
1405 * On 2430 & 3430 GPIO 5 uses CORE L4 ICLK
1406 */
1407 #if defined(CONFIG_ARCH_OMAP2430)
1408 if (cpu_is_omap2430()) {
1409 gpio5_ick = clk_get(NULL, "gpio5_ick");
1410 if (IS_ERR(gpio5_ick))
1411 printk("Could not get gpio5_ick\n");
1412 else
1413 clk_enable(gpio5_ick);
1414 gpio5_fck = clk_get(NULL, "gpio5_fck");
1415 if (IS_ERR(gpio5_fck))
1416 printk("Could not get gpio5_fck\n");
1417 else
1418 clk_enable(gpio5_fck);
1419 }
1420 #endif
1421 }
1422 #endif
1423
1424 #if defined(CONFIG_ARCH_OMAP3)
1425 if (cpu_is_omap34xx()) {
1426 for (i = 0; i < OMAP34XX_NR_GPIOS; i++) {
1427 sprintf(clk_name, "gpio%d_ick", i + 1);
1428 gpio_iclks[i] = clk_get(NULL, clk_name);
1429 if (IS_ERR(gpio_iclks[i]))
1430 printk(KERN_ERR "Could not get %s\n", clk_name);
1431 else
1432 clk_enable(gpio_iclks[i]);
1433 }
1434 }
1435 #endif
1436
1437
1438 #ifdef CONFIG_ARCH_OMAP15XX
1439 if (cpu_is_omap15xx()) {
1440 printk(KERN_INFO "OMAP1510 GPIO hardware\n");
1441 gpio_bank_count = 2;
1442 gpio_bank = gpio_bank_1510;
1443 }
1444 #endif
1445 #if defined(CONFIG_ARCH_OMAP16XX)
1446 if (cpu_is_omap16xx()) {
1447 u32 rev;
1448
1449 gpio_bank_count = 5;
1450 gpio_bank = gpio_bank_1610;
1451 rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
1452 printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
1453 (rev >> 4) & 0x0f, rev & 0x0f);
1454 }
1455 #endif
1456 #ifdef CONFIG_ARCH_OMAP730
1457 if (cpu_is_omap730()) {
1458 printk(KERN_INFO "OMAP730 GPIO hardware\n");
1459 gpio_bank_count = 7;
1460 gpio_bank = gpio_bank_730;
1461 }
1462 #endif
1463 #ifdef CONFIG_ARCH_OMAP850
1464 if (cpu_is_omap850()) {
1465 printk(KERN_INFO "OMAP850 GPIO hardware\n");
1466 gpio_bank_count = 7;
1467 gpio_bank = gpio_bank_850;
1468 }
1469 #endif
1470
1471 #ifdef CONFIG_ARCH_OMAP24XX
1472 if (cpu_is_omap242x()) {
1473 int rev;
1474
1475 gpio_bank_count = 4;
1476 gpio_bank = gpio_bank_242x;
1477 rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
1478 printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n",
1479 (rev >> 4) & 0x0f, rev & 0x0f);
1480 }
1481 if (cpu_is_omap243x()) {
1482 int rev;
1483
1484 gpio_bank_count = 5;
1485 gpio_bank = gpio_bank_243x;
1486 rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
1487 printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n",
1488 (rev >> 4) & 0x0f, rev & 0x0f);
1489 }
1490 #endif
1491 #ifdef CONFIG_ARCH_OMAP34XX
1492 if (cpu_is_omap34xx()) {
1493 int rev;
1494
1495 gpio_bank_count = OMAP34XX_NR_GPIOS;
1496 gpio_bank = gpio_bank_34xx;
1497 rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
1498 printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n",
1499 (rev >> 4) & 0x0f, rev & 0x0f);
1500 }
1501 #endif
1502 for (i = 0; i < gpio_bank_count; i++) {
1503 int j, gpio_count = 16;
1504
1505 bank = &gpio_bank[i];
1506 spin_lock_init(&bank->lock);
1507 if (bank_is_mpuio(bank))
1508 __raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT);
1509 if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
1510 __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK);
1511 __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS);
1512 }
1513 if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
1514 __raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1);
1515 __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
1516 __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
1517 }
1518 if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
1519 __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
1520 __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
1521
1522 gpio_count = 32; /* 730 has 32-bit GPIOs */
1523 }
1524
1525 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
1526 if (bank->method == METHOD_GPIO_24XX) {
1527 static const u32 non_wakeup_gpios[] = {
1528 0xe203ffc0, 0x08700040
1529 };
1530
1531 __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
1532 __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
1533 __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
1534
1535 /* Initialize interface clock ungated, module enabled */
1536 __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
1537 if (i < ARRAY_SIZE(non_wakeup_gpios))
1538 bank->non_wakeup_gpios = non_wakeup_gpios[i];
1539 gpio_count = 32;
1540 }
1541 #endif
1542
1543 /* REVISIT eventually switch from OMAP-specific gpio structs
1544 * over to the generic ones
1545 */
1546 bank->chip.request = omap_gpio_request;
1547 bank->chip.free = omap_gpio_free;
1548 bank->chip.direction_input = gpio_input;
1549 bank->chip.get = gpio_get;
1550 bank->chip.direction_output = gpio_output;
1551 bank->chip.set = gpio_set;
1552 bank->chip.to_irq = gpio_2irq;
1553 if (bank_is_mpuio(bank)) {
1554 bank->chip.label = "mpuio";
1555 #ifdef CONFIG_ARCH_OMAP16XX
1556 bank->chip.dev = &omap_mpuio_device.dev;
1557 #endif
1558 bank->chip.base = OMAP_MPUIO(0);
1559 } else {
1560 bank->chip.label = "gpio";
1561 bank->chip.base = gpio;
1562 gpio += gpio_count;
1563 }
1564 bank->chip.ngpio = gpio_count;
1565
1566 gpiochip_add(&bank->chip);
1567
1568 for (j = bank->virtual_irq_start;
1569 j < bank->virtual_irq_start + gpio_count; j++) {
1570 lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class);
1571 set_irq_chip_data(j, bank);
1572 if (bank_is_mpuio(bank))
1573 set_irq_chip(j, &mpuio_irq_chip);
1574 else
1575 set_irq_chip(j, &gpio_irq_chip);
1576 set_irq_handler(j, handle_simple_irq);
1577 set_irq_flags(j, IRQF_VALID);
1578 }
1579 set_irq_chained_handler(bank->irq, gpio_irq_handler);
1580 set_irq_data(bank->irq, bank);
1581
1582 if (cpu_is_omap34xx()) {
1583 sprintf(clk_name, "gpio%d_dbck", i + 1);
1584 bank->dbck = clk_get(NULL, clk_name);
1585 if (IS_ERR(bank->dbck))
1586 printk(KERN_ERR "Could not get %s\n", clk_name);
1587 }
1588 }
1589
1590 /* Enable system clock for GPIO module.
1591 * The CAM_CLK_CTRL *is* really the right place. */
1592 if (cpu_is_omap16xx())
1593 omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL);
1594
1595 /* Enable autoidle for the OCP interface */
1596 if (cpu_is_omap24xx())
1597 omap_writel(1 << 0, 0x48019010);
1598 if (cpu_is_omap34xx())
1599 omap_writel(1 << 0, 0x48306814);
1600
1601 return 0;
1602 }
1603
1604 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
1605 static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
1606 {
1607 int i;
1608
1609 if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
1610 return 0;
1611
1612 for (i = 0; i < gpio_bank_count; i++) {
1613 struct gpio_bank *bank = &gpio_bank[i];
1614 void __iomem *wake_status;
1615 void __iomem *wake_clear;
1616 void __iomem *wake_set;
1617 unsigned long flags;
1618
1619 switch (bank->method) {
1620 #ifdef CONFIG_ARCH_OMAP16XX
1621 case METHOD_GPIO_1610:
1622 wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
1623 wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
1624 wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
1625 break;
1626 #endif
1627 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
1628 case METHOD_GPIO_24XX:
1629 wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
1630 wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
1631 wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
1632 break;
1633 #endif
1634 default:
1635 continue;
1636 }
1637
1638 spin_lock_irqsave(&bank->lock, flags);
1639 bank->saved_wakeup = __raw_readl(wake_status);
1640 __raw_writel(0xffffffff, wake_clear);
1641 __raw_writel(bank->suspend_wakeup, wake_set);
1642 spin_unlock_irqrestore(&bank->lock, flags);
1643 }
1644
1645 return 0;
1646 }
1647
1648 static int omap_gpio_resume(struct sys_device *dev)
1649 {
1650 int i;
1651
1652 if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
1653 return 0;
1654
1655 for (i = 0; i < gpio_bank_count; i++) {
1656 struct gpio_bank *bank = &gpio_bank[i];
1657 void __iomem *wake_clear;
1658 void __iomem *wake_set;
1659 unsigned long flags;
1660
1661 switch (bank->method) {
1662 #ifdef CONFIG_ARCH_OMAP16XX
1663 case METHOD_GPIO_1610:
1664 wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
1665 wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
1666 break;
1667 #endif
1668 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
1669 case METHOD_GPIO_24XX:
1670 wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
1671 wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
1672 break;
1673 #endif
1674 default:
1675 continue;
1676 }
1677
1678 spin_lock_irqsave(&bank->lock, flags);
1679 __raw_writel(0xffffffff, wake_clear);
1680 __raw_writel(bank->saved_wakeup, wake_set);
1681 spin_unlock_irqrestore(&bank->lock, flags);
1682 }
1683
1684 return 0;
1685 }
1686
1687 static struct sysdev_class omap_gpio_sysclass = {
1688 .name = "gpio",
1689 .suspend = omap_gpio_suspend,
1690 .resume = omap_gpio_resume,
1691 };
1692
1693 static struct sys_device omap_gpio_device = {
1694 .id = 0,
1695 .cls = &omap_gpio_sysclass,
1696 };
1697
1698 #endif
1699
1700 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
1701
1702 static int workaround_enabled;
1703
1704 void omap2_gpio_prepare_for_retention(void)
1705 {
1706 int i, c = 0;
1707
1708 /* Remove triggering for all non-wakeup GPIOs. Otherwise spurious
1709 * IRQs will be generated. See OMAP2420 Errata item 1.101. */
1710 for (i = 0; i < gpio_bank_count; i++) {
1711 struct gpio_bank *bank = &gpio_bank[i];
1712 u32 l1, l2;
1713
1714 if (!(bank->enabled_non_wakeup_gpios))
1715 continue;
1716 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
1717 bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
1718 l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
1719 l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
1720 #endif
1721 bank->saved_fallingdetect = l1;
1722 bank->saved_risingdetect = l2;
1723 l1 &= ~bank->enabled_non_wakeup_gpios;
1724 l2 &= ~bank->enabled_non_wakeup_gpios;
1725 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
1726 __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
1727 __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
1728 #endif
1729 c++;
1730 }
1731 if (!c) {
1732 workaround_enabled = 0;
1733 return;
1734 }
1735 workaround_enabled = 1;
1736 }
1737
1738 void omap2_gpio_resume_after_retention(void)
1739 {
1740 int i;
1741
1742 if (!workaround_enabled)
1743 return;
1744 for (i = 0; i < gpio_bank_count; i++) {
1745 struct gpio_bank *bank = &gpio_bank[i];
1746 u32 l;
1747
1748 if (!(bank->enabled_non_wakeup_gpios))
1749 continue;
1750 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
1751 __raw_writel(bank->saved_fallingdetect,
1752 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
1753 __raw_writel(bank->saved_risingdetect,
1754 bank->base + OMAP24XX_GPIO_RISINGDETECT);
1755 #endif
1756 /* Check if any of the non-wakeup interrupt GPIOs have changed
1757 * state. If so, generate an IRQ by software. This is
1758 * horribly racy, but it's the best we can do to work around
1759 * this silicon bug. */
1760 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
1761 l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
1762 #endif
1763 l ^= bank->saved_datain;
1764 l &= bank->non_wakeup_gpios;
1765 if (l) {
1766 u32 old0, old1;
1767 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
1768 old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
1769 old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
1770 __raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
1771 __raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
1772 __raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
1773 __raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
1774 #endif
1775 }
1776 }
1777
1778 }
1779
1780 #endif
1781
1782 /*
1783 * This may get called early from board specific init
1784 * for boards that have interrupts routed via FPGA.
1785 */
1786 int __init omap_gpio_init(void)
1787 {
1788 if (!initialized)
1789 return _omap_gpio_init();
1790 else
1791 return 0;
1792 }
1793
1794 static int __init omap_gpio_sysinit(void)
1795 {
1796 int ret = 0;
1797
1798 if (!initialized)
1799 ret = _omap_gpio_init();
1800
1801 mpuio_init();
1802
1803 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
1804 if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
1805 if (ret == 0) {
1806 ret = sysdev_class_register(&omap_gpio_sysclass);
1807 if (ret == 0)
1808 ret = sysdev_register(&omap_gpio_device);
1809 }
1810 }
1811 #endif
1812
1813 return ret;
1814 }
1815
1816 arch_initcall(omap_gpio_sysinit);
1817
1818
1819 #ifdef CONFIG_DEBUG_FS
1820
1821 #include <linux/debugfs.h>
1822 #include <linux/seq_file.h>
1823
1824 static int gpio_is_input(struct gpio_bank *bank, int mask)
1825 {
1826 void __iomem *reg = bank->base;
1827
1828 switch (bank->method) {
1829 case METHOD_MPUIO:
1830 reg += OMAP_MPUIO_IO_CNTL;
1831 break;
1832 case METHOD_GPIO_1510:
1833 reg += OMAP1510_GPIO_DIR_CONTROL;
1834 break;
1835 case METHOD_GPIO_1610:
1836 reg += OMAP1610_GPIO_DIRECTION;
1837 break;
1838 case METHOD_GPIO_730:
1839 reg += OMAP730_GPIO_DIR_CONTROL;
1840 break;
1841 case METHOD_GPIO_850:
1842 reg += OMAP850_GPIO_DIR_CONTROL;
1843 break;
1844 case METHOD_GPIO_24XX:
1845 reg += OMAP24XX_GPIO_OE;
1846 break;
1847 }
1848 return __raw_readl(reg) & mask;
1849 }
1850
1851
1852 static int dbg_gpio_show(struct seq_file *s, void *unused)
1853 {
1854 unsigned i, j, gpio;
1855
1856 for (i = 0, gpio = 0; i < gpio_bank_count; i++) {
1857 struct gpio_bank *bank = gpio_bank + i;
1858 unsigned bankwidth = 16;
1859 u32 mask = 1;
1860
1861 if (bank_is_mpuio(bank))
1862 gpio = OMAP_MPUIO(0);
1863 else if (cpu_class_is_omap2() || cpu_is_omap730() ||
1864 cpu_is_omap850())
1865 bankwidth = 32;
1866
1867 for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
1868 unsigned irq, value, is_in, irqstat;
1869 const char *label;
1870
1871 label = gpiochip_is_requested(&bank->chip, j);
1872 if (!label)
1873 continue;
1874
1875 irq = bank->virtual_irq_start + j;
1876 value = gpio_get_value(gpio);
1877 is_in = gpio_is_input(bank, mask);
1878
1879 if (bank_is_mpuio(bank))
1880 seq_printf(s, "MPUIO %2d ", j);
1881 else
1882 seq_printf(s, "GPIO %3d ", gpio);
1883 seq_printf(s, "(%-20.20s): %s %s",
1884 label,
1885 is_in ? "in " : "out",
1886 value ? "hi" : "lo");
1887
1888 /* FIXME for at least omap2, show pullup/pulldown state */
1889
1890 irqstat = irq_desc[irq].status;
1891 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
1892 defined(CONFIG_ARCH_OMAP34XX)
1893 if (is_in && ((bank->suspend_wakeup & mask)
1894 || irqstat & IRQ_TYPE_SENSE_MASK)) {
1895 char *trigger = NULL;
1896
1897 switch (irqstat & IRQ_TYPE_SENSE_MASK) {
1898 case IRQ_TYPE_EDGE_FALLING:
1899 trigger = "falling";
1900 break;
1901 case IRQ_TYPE_EDGE_RISING:
1902 trigger = "rising";
1903 break;
1904 case IRQ_TYPE_EDGE_BOTH:
1905 trigger = "bothedge";
1906 break;
1907 case IRQ_TYPE_LEVEL_LOW:
1908 trigger = "low";
1909 break;
1910 case IRQ_TYPE_LEVEL_HIGH:
1911 trigger = "high";
1912 break;
1913 case IRQ_TYPE_NONE:
1914 trigger = "(?)";
1915 break;
1916 }
1917 seq_printf(s, ", irq-%d %-8s%s",
1918 irq, trigger,
1919 (bank->suspend_wakeup & mask)
1920 ? " wakeup" : "");
1921 }
1922 #endif
1923 seq_printf(s, "\n");
1924 }
1925
1926 if (bank_is_mpuio(bank)) {
1927 seq_printf(s, "\n");
1928 gpio = 0;
1929 }
1930 }
1931 return 0;
1932 }
1933
1934 static int dbg_gpio_open(struct inode *inode, struct file *file)
1935 {
1936 return single_open(file, dbg_gpio_show, &inode->i_private);
1937 }
1938
1939 static const struct file_operations debug_fops = {
1940 .open = dbg_gpio_open,
1941 .read = seq_read,
1942 .llseek = seq_lseek,
1943 .release = single_release,
1944 };
1945
1946 static int __init omap_gpio_debuginit(void)
1947 {
1948 (void) debugfs_create_file("omap_gpio", S_IRUGO,
1949 NULL, NULL, &debug_fops);
1950 return 0;
1951 }
1952 late_initcall(omap_gpio_debuginit);
1953 #endif
Linux with added FPC-III support