Staging: netwave: delete the driver
[linux/fpc-iii.git] / drivers / dma / ppc4xx / xor.h
blobdaed7384daac9d76536bd8b15675861b73cef899
1 /*
2 * 440SPe's XOR engines support header file
4 * 2006-2009 (C) DENX Software Engineering.
6 * Author: Yuri Tikhonov <yur@emcraft.com>
8 * This file is licensed under the term of the GNU General Public License
9 * version 2. The program licensed "as is" without any warranty of any
10 * kind, whether express or implied.
13 #ifndef _PPC440SPE_XOR_H
14 #define _PPC440SPE_XOR_H
16 #include <linux/types.h>
18 /* Number of XOR engines available on the contoller */
19 #define XOR_ENGINES_NUM 1
21 /* Number of operands supported in the h/w */
22 #define XOR_MAX_OPS 16
25 * XOR Command Block Control Register bits
27 #define XOR_CBCR_LNK_BIT (1<<31) /* link present */
28 #define XOR_CBCR_TGT_BIT (1<<30) /* target present */
29 #define XOR_CBCR_CBCE_BIT (1<<29) /* command block compete enable */
30 #define XOR_CBCR_RNZE_BIT (1<<28) /* result not zero enable */
31 #define XOR_CBCR_XNOR_BIT (1<<15) /* XOR/XNOR */
32 #define XOR_CDCR_OAC_MSK (0x7F) /* operand address count */
35 * XORCore Status Register bits
37 #define XOR_SR_XCP_BIT (1<<31) /* core processing */
38 #define XOR_SR_ICB_BIT (1<<17) /* invalid CB */
39 #define XOR_SR_IC_BIT (1<<16) /* invalid command */
40 #define XOR_SR_IPE_BIT (1<<15) /* internal parity error */
41 #define XOR_SR_RNZ_BIT (1<<2) /* result not Zero */
42 #define XOR_SR_CBC_BIT (1<<1) /* CB complete */
43 #define XOR_SR_CBLC_BIT (1<<0) /* CB list complete */
46 * XORCore Control Set and Reset Register bits
48 #define XOR_CRSR_XASR_BIT (1<<31) /* soft reset */
49 #define XOR_CRSR_XAE_BIT (1<<30) /* enable */
50 #define XOR_CRSR_RCBE_BIT (1<<29) /* refetch CB enable */
51 #define XOR_CRSR_PAUS_BIT (1<<28) /* pause */
52 #define XOR_CRSR_64BA_BIT (1<<27) /* 64/32 CB format */
53 #define XOR_CRSR_CLP_BIT (1<<25) /* continue list processing */
56 * XORCore Interrupt Enable Register
58 #define XOR_IE_ICBIE_BIT (1<<17) /* Invalid Command Block IRQ Enable */
59 #define XOR_IE_ICIE_BIT (1<<16) /* Invalid Command IRQ Enable */
60 #define XOR_IE_RPTIE_BIT (1<<14) /* Read PLB Timeout Error IRQ Enable */
61 #define XOR_IE_CBCIE_BIT (1<<1) /* CB complete interrupt enable */
62 #define XOR_IE_CBLCI_BIT (1<<0) /* CB list complete interrupt enable */
65 * XOR Accelerator engine Command Block Type
67 struct xor_cb {
69 * Basic 64-bit format XOR CB (Table 19-1, p.463, 440spe_um_1_22.pdf)
71 u32 cbc; /* control */
72 u32 cbbc; /* byte count */
73 u32 cbs; /* status */
74 u8 pad0[4]; /* reserved */
75 u32 cbtah; /* target address high */
76 u32 cbtal; /* target address low */
77 u32 cblah; /* link address high */
78 u32 cblal; /* link address low */
79 struct {
80 u32 h;
81 u32 l;
82 } __attribute__ ((packed)) ops[16];
83 } __attribute__ ((packed));
86 * XOR hardware registers Table 19-3, UM 1.22
88 struct xor_regs {
89 u32 op_ar[16][2]; /* operand address[0]-high,[1]-low registers */
90 u8 pad0[352]; /* reserved */
91 u32 cbcr; /* CB control register */
92 u32 cbbcr; /* CB byte count register */
93 u32 cbsr; /* CB status register */
94 u8 pad1[4]; /* reserved */
95 u32 cbtahr; /* operand target address high register */
96 u32 cbtalr; /* operand target address low register */
97 u32 cblahr; /* CB link address high register */
98 u32 cblalr; /* CB link address low register */
99 u32 crsr; /* control set register */
100 u32 crrr; /* control reset register */
101 u32 ccbahr; /* current CB address high register */
102 u32 ccbalr; /* current CB address low register */
103 u32 plbr; /* PLB configuration register */
104 u32 ier; /* interrupt enable register */
105 u32 pecr; /* parity error count register */
106 u32 sr; /* status register */
107 u32 revidr; /* revision ID register */
110 #endif /* _PPC440SPE_XOR_H */