1 /******************************************************************************
3 * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/pci.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/delay.h>
33 #include <linux/skbuff.h>
34 #include <linux/netdevice.h>
35 #include <linux/wireless.h>
36 #include <net/mac80211.h>
37 #include <linux/etherdevice.h>
38 #include <asm/unaligned.h>
40 #include "iwl-eeprom.h"
45 #include "iwl-helpers.h"
46 #include "iwl-5000-hw.h"
47 #include "iwl-agn-led.h"
49 /* Highest firmware API version supported */
50 #define IWL1000_UCODE_API_MAX 3
52 /* Lowest firmware API version supported */
53 #define IWL1000_UCODE_API_MIN 1
55 #define IWL1000_FW_PRE "iwlwifi-1000-"
56 #define _IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode"
57 #define IWL1000_MODULE_FIRMWARE(api) _IWL1000_MODULE_FIRMWARE(api)
61 * For 1000, use advance thermal throttling critical temperature threshold,
62 * but legacy thermal management implementation for now.
63 * This is for the reason of 1000 uCode using advance thermal throttling API
64 * but not implement ct_kill_exit based on ct_kill exit temperature
65 * so the thermal throttling will still based on legacy thermal throttling
67 * The code here need to be modified once 1000 uCode has the advanced thermal
68 * throttling algorithm in place
70 static void iwl1000_set_ct_threshold(struct iwl_priv
*priv
)
73 priv
->hw_params
.ct_kill_threshold
= CT_KILL_THRESHOLD_LEGACY
;
74 priv
->hw_params
.ct_kill_exit_threshold
= CT_KILL_EXIT_THRESHOLD
;
77 /* NIC configuration for 1000 series */
78 static void iwl1000_nic_config(struct iwl_priv
*priv
)
80 /* set CSR_HW_CONFIG_REG for uCode use */
81 iwl_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
82 CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI
|
83 CSR_HW_IF_CONFIG_REG_BIT_MAC_SI
);
85 /* Setting digital SVR for 1000 card to 1.32V */
86 /* locking is acquired in iwl_set_bits_mask_prph() function */
87 iwl_set_bits_mask_prph(priv
, APMG_DIGITAL_SVR_REG
,
88 APMG_SVR_DIGITAL_VOLTAGE_1_32
,
89 ~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK
);
92 static struct iwl_sensitivity_ranges iwl1000_sensitivity
= {
94 .max_nrg_cck
= 0, /* not used, set to 0 */
95 .auto_corr_min_ofdm
= 90,
96 .auto_corr_min_ofdm_mrc
= 170,
97 .auto_corr_min_ofdm_x1
= 120,
98 .auto_corr_min_ofdm_mrc_x1
= 240,
100 .auto_corr_max_ofdm
= 120,
101 .auto_corr_max_ofdm_mrc
= 210,
102 .auto_corr_max_ofdm_x1
= 155,
103 .auto_corr_max_ofdm_mrc_x1
= 290,
105 .auto_corr_min_cck
= 125,
106 .auto_corr_max_cck
= 200,
107 .auto_corr_min_cck_mrc
= 170,
108 .auto_corr_max_cck_mrc
= 400,
112 .barker_corr_th_min
= 190,
113 .barker_corr_th_min_mrc
= 390,
117 static int iwl1000_hw_set_hw_params(struct iwl_priv
*priv
)
119 if (priv
->cfg
->mod_params
->num_of_queues
>= IWL_MIN_NUM_QUEUES
&&
120 priv
->cfg
->mod_params
->num_of_queues
<= IWL50_NUM_QUEUES
)
121 priv
->cfg
->num_of_queues
=
122 priv
->cfg
->mod_params
->num_of_queues
;
124 priv
->hw_params
.max_txq_num
= priv
->cfg
->num_of_queues
;
125 priv
->hw_params
.dma_chnl_num
= FH50_TCSR_CHNL_NUM
;
126 priv
->hw_params
.scd_bc_tbls_size
=
127 priv
->cfg
->num_of_queues
*
128 sizeof(struct iwl5000_scd_bc_tbl
);
129 priv
->hw_params
.tfd_size
= sizeof(struct iwl_tfd
);
130 priv
->hw_params
.max_stations
= IWL5000_STATION_COUNT
;
131 priv
->hw_params
.bcast_sta_id
= IWL5000_BROADCAST_ID
;
133 priv
->hw_params
.max_data_size
= IWL50_RTC_DATA_SIZE
;
134 priv
->hw_params
.max_inst_size
= IWL50_RTC_INST_SIZE
;
136 priv
->hw_params
.max_bsm_size
= 0;
137 priv
->hw_params
.ht40_channel
= BIT(IEEE80211_BAND_2GHZ
) |
138 BIT(IEEE80211_BAND_5GHZ
);
139 priv
->hw_params
.rx_wrt_ptr_reg
= FH_RSCSR_CHNL0_WPTR
;
141 priv
->hw_params
.tx_chains_num
= num_of_ant(priv
->cfg
->valid_tx_ant
);
142 priv
->hw_params
.rx_chains_num
= num_of_ant(priv
->cfg
->valid_rx_ant
);
143 priv
->hw_params
.valid_tx_ant
= priv
->cfg
->valid_tx_ant
;
144 priv
->hw_params
.valid_rx_ant
= priv
->cfg
->valid_rx_ant
;
146 if (priv
->cfg
->ops
->lib
->temp_ops
.set_ct_kill
)
147 priv
->cfg
->ops
->lib
->temp_ops
.set_ct_kill(priv
);
149 /* Set initial sensitivity parameters */
150 /* Set initial calibration set */
151 priv
->hw_params
.sens
= &iwl1000_sensitivity
;
152 priv
->hw_params
.calib_init_cfg
=
153 BIT(IWL_CALIB_XTAL
) |
155 BIT(IWL_CALIB_TX_IQ
) |
156 BIT(IWL_CALIB_TX_IQ_PERD
) |
157 BIT(IWL_CALIB_BASE_BAND
);
162 static struct iwl_lib_ops iwl1000_lib
= {
163 .set_hw_params
= iwl1000_hw_set_hw_params
,
164 .txq_update_byte_cnt_tbl
= iwl5000_txq_update_byte_cnt_tbl
,
165 .txq_inval_byte_cnt_tbl
= iwl5000_txq_inval_byte_cnt_tbl
,
166 .txq_set_sched
= iwl5000_txq_set_sched
,
167 .txq_agg_enable
= iwl5000_txq_agg_enable
,
168 .txq_agg_disable
= iwl5000_txq_agg_disable
,
169 .txq_attach_buf_to_tfd
= iwl_hw_txq_attach_buf_to_tfd
,
170 .txq_free_tfd
= iwl_hw_txq_free_tfd
,
171 .txq_init
= iwl_hw_tx_queue_init
,
172 .rx_handler_setup
= iwl5000_rx_handler_setup
,
173 .setup_deferred_work
= iwl5000_setup_deferred_work
,
174 .is_valid_rtc_data_addr
= iwl5000_hw_valid_rtc_data_addr
,
175 .load_ucode
= iwl5000_load_ucode
,
176 .dump_nic_event_log
= iwl_dump_nic_event_log
,
177 .dump_nic_error_log
= iwl_dump_nic_error_log
,
178 .dump_csr
= iwl_dump_csr
,
179 .dump_fh
= iwl_dump_fh
,
180 .init_alive_start
= iwl5000_init_alive_start
,
181 .alive_notify
= iwl5000_alive_notify
,
182 .send_tx_power
= iwl5000_send_tx_power
,
183 .update_chain_flags
= iwl_update_chain_flags
,
185 .init
= iwl_apm_init
,
186 .stop
= iwl_apm_stop
,
187 .config
= iwl1000_nic_config
,
188 .set_pwr_src
= iwl_set_pwr_src
,
191 .regulatory_bands
= {
192 EEPROM_5000_REG_BAND_1_CHANNELS
,
193 EEPROM_5000_REG_BAND_2_CHANNELS
,
194 EEPROM_5000_REG_BAND_3_CHANNELS
,
195 EEPROM_5000_REG_BAND_4_CHANNELS
,
196 EEPROM_5000_REG_BAND_5_CHANNELS
,
197 EEPROM_5000_REG_BAND_24_HT40_CHANNELS
,
198 EEPROM_5000_REG_BAND_52_HT40_CHANNELS
200 .verify_signature
= iwlcore_eeprom_verify_signature
,
201 .acquire_semaphore
= iwlcore_eeprom_acquire_semaphore
,
202 .release_semaphore
= iwlcore_eeprom_release_semaphore
,
203 .calib_version
= iwl5000_eeprom_calib_version
,
204 .query_addr
= iwl5000_eeprom_query_addr
,
206 .post_associate
= iwl_post_associate
,
208 .config_ap
= iwl_config_ap
,
210 .temperature
= iwl5000_temperature
,
211 .set_ct_kill
= iwl1000_set_ct_threshold
,
213 .add_bcast_station
= iwl_add_bcast_station
,
216 static const struct iwl_ops iwl1000_ops
= {
217 .ucode
= &iwl5000_ucode
,
219 .hcmd
= &iwl5000_hcmd
,
220 .utils
= &iwl5000_hcmd_utils
,
221 .led
= &iwlagn_led_ops
,
224 struct iwl_cfg iwl1000_bgn_cfg
= {
225 .name
= "1000 Series BGN",
226 .fw_name_pre
= IWL1000_FW_PRE
,
227 .ucode_api_max
= IWL1000_UCODE_API_MAX
,
228 .ucode_api_min
= IWL1000_UCODE_API_MIN
,
229 .sku
= IWL_SKU_G
|IWL_SKU_N
,
231 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
232 .eeprom_ver
= EEPROM_1000_EEPROM_VERSION
,
233 .eeprom_calib_ver
= EEPROM_5000_TX_POWER_VERSION
,
234 .num_of_queues
= IWL50_NUM_QUEUES
,
235 .num_of_ampdu_queues
= IWL50_NUM_AMPDU_QUEUES
,
236 .mod_params
= &iwl50_mod_params
,
237 .valid_tx_ant
= ANT_A
,
238 .valid_rx_ant
= ANT_AB
,
239 .pll_cfg_val
= CSR50_ANA_PLL_CFG_VAL
,
242 .max_ll_items
= OTP_MAX_LL_ITEMS_1000
,
243 .shadow_ram_support
= false,
244 .ht_greenfield_support
= true,
245 .led_compensation
= 51,
246 .use_rts_for_ht
= true, /* use rts/cts protection */
247 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
248 .support_ct_kill_exit
= true,
249 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF
,
250 .chain_noise_scale
= 1000,
253 struct iwl_cfg iwl1000_bg_cfg
= {
254 .name
= "1000 Series BG",
255 .fw_name_pre
= IWL1000_FW_PRE
,
256 .ucode_api_max
= IWL1000_UCODE_API_MAX
,
257 .ucode_api_min
= IWL1000_UCODE_API_MIN
,
260 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
261 .eeprom_ver
= EEPROM_1000_EEPROM_VERSION
,
262 .eeprom_calib_ver
= EEPROM_5000_TX_POWER_VERSION
,
263 .num_of_queues
= IWL50_NUM_QUEUES
,
264 .num_of_ampdu_queues
= IWL50_NUM_AMPDU_QUEUES
,
265 .mod_params
= &iwl50_mod_params
,
266 .valid_tx_ant
= ANT_A
,
267 .valid_rx_ant
= ANT_AB
,
268 .pll_cfg_val
= CSR50_ANA_PLL_CFG_VAL
,
271 .max_ll_items
= OTP_MAX_LL_ITEMS_1000
,
272 .shadow_ram_support
= false,
273 .ht_greenfield_support
= true,
274 .led_compensation
= 51,
275 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
276 .support_ct_kill_exit
= true,
277 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF
,
278 .chain_noise_scale
= 1000,
281 MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX
));