1 /* main.c - (formerly known as dldwd_cs.c, orinoco_cs.c and orinoco.c)
3 * A driver for Hermes or Prism 2 chipset based PCMCIA wireless
4 * adaptors, with Lucent/Agere, Intersil or Symbol firmware.
6 * Current maintainers (as of 29 September 2003) are:
7 * Pavel Roskin <proski AT gnu.org>
8 * and David Gibson <hermes AT gibson.dropbear.id.au>
10 * (C) Copyright David Gibson, IBM Corporation 2001-2003.
11 * Copyright (C) 2000 David Gibson, Linuxcare Australia.
12 * With some help from :
13 * Copyright (C) 2001 Jean Tourrilhes, HP Labs
14 * Copyright (C) 2001 Benjamin Herrenschmidt
16 * Based on dummy_cs.c 1.27 2000/06/12 21:27:25
18 * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
19 * AT fasta.fh-dortmund.de>
20 * http://www.stud.fh-dortmund.de/~andy/wvlan/
22 * The contents of this file are subject to the Mozilla Public License
23 * Version 1.1 (the "License"); you may not use this file except in
24 * compliance with the License. You may obtain a copy of the License
25 * at http://www.mozilla.org/MPL/
27 * Software distributed under the License is distributed on an "AS IS"
28 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
29 * the License for the specific language governing rights and
30 * limitations under the License.
32 * The initial developer of the original code is David A. Hinds
33 * <dahinds AT users.sourceforge.net>. Portions created by David
34 * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights
37 * Alternatively, the contents of this file may be used under the
38 * terms of the GNU General Public License version 2 (the "GPL"), in
39 * which case the provisions of the GPL are applicable instead of the
40 * above. If you wish to allow the use of your version of this file
41 * only under the terms of the GPL and not to allow others to use your
42 * version of this file under the MPL, indicate your decision by
43 * deleting the provisions above and replace them with the notice and
44 * other provisions required by the GPL. If you do not delete the
45 * provisions above, a recipient may use your version of this file
46 * under either the MPL or the GPL. */
50 * o Handle de-encapsulation within network layer, provide 802.11
51 * headers (patch from Thomas 'Dent' Mirlacher)
52 * o Fix possible races in SPY handling.
53 * o Disconnect wireless extensions from fundamental configuration.
54 * o (maybe) Software WEP support (patch from Stano Meduna).
55 * o (maybe) Use multiple Tx buffers - driver handling queue
56 * rather than firmware.
59 /* Locking and synchronization:
61 * The basic principle is that everything is serialized through a
62 * single spinlock, priv->lock. The lock is used in user, bh and irq
63 * context, so when taken outside hardirq context it should always be
64 * taken with interrupts disabled. The lock protects both the
65 * hardware and the struct orinoco_private.
67 * Another flag, priv->hw_unavailable indicates that the hardware is
68 * unavailable for an extended period of time (e.g. suspended, or in
69 * the middle of a hard reset). This flag is protected by the
70 * spinlock. All code which touches the hardware should check the
71 * flag after taking the lock, and if it is set, give up on whatever
72 * they are doing and drop the lock again. The orinoco_lock()
73 * function handles this (it unlocks and returns -EBUSY if
74 * hw_unavailable is non-zero).
77 #define DRIVER_NAME "orinoco"
79 #include <linux/module.h>
80 #include <linux/kernel.h>
81 #include <linux/slab.h>
82 #include <linux/init.h>
83 #include <linux/delay.h>
84 #include <linux/device.h>
85 #include <linux/netdevice.h>
86 #include <linux/etherdevice.h>
87 #include <linux/suspend.h>
88 #include <linux/if_arp.h>
89 #include <linux/wireless.h>
90 #include <linux/ieee80211.h>
91 #include <net/iw_handler.h>
92 #include <net/cfg80211.h>
94 #include "hermes_rid.h"
95 #include "hermes_dld.h"
106 /********************************************************************/
107 /* Module information */
108 /********************************************************************/
110 MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & "
111 "David Gibson <hermes@gibson.dropbear.id.au>");
112 MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based "
113 "and similar wireless cards");
114 MODULE_LICENSE("Dual MPL/GPL");
116 /* Level of debugging. Used in the macros in orinoco.h */
118 int orinoco_debug
= ORINOCO_DEBUG
;
119 EXPORT_SYMBOL(orinoco_debug
);
120 module_param(orinoco_debug
, int, 0644);
121 MODULE_PARM_DESC(orinoco_debug
, "Debug level");
124 static int suppress_linkstatus
; /* = 0 */
125 module_param(suppress_linkstatus
, bool, 0644);
126 MODULE_PARM_DESC(suppress_linkstatus
, "Don't log link status changes");
128 static int ignore_disconnect
; /* = 0 */
129 module_param(ignore_disconnect
, int, 0644);
130 MODULE_PARM_DESC(ignore_disconnect
,
131 "Don't report lost link to the network layer");
133 int force_monitor
; /* = 0 */
134 module_param(force_monitor
, int, 0644);
135 MODULE_PARM_DESC(force_monitor
, "Allow monitor mode for all firmware versions");
137 /********************************************************************/
138 /* Internal constants */
139 /********************************************************************/
141 /* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
142 static const u8 encaps_hdr
[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
143 #define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
145 #define ORINOCO_MIN_MTU 256
146 #define ORINOCO_MAX_MTU (IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD)
148 #define MAX_IRQLOOPS_PER_IRQ 10
149 #define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of
150 * how many events the
152 * legitimately generate */
154 #define DUMMY_FID 0xFFFF
156 /*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \
157 HERMES_MAX_MULTICAST : 0)*/
158 #define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST)
160 #define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \
161 | HERMES_EV_TX | HERMES_EV_TXEXC \
162 | HERMES_EV_WTERR | HERMES_EV_INFO \
165 /********************************************************************/
167 /********************************************************************/
169 /* Beginning of the Tx descriptor, used in TxExc handling */
170 struct hermes_txexc_data
{
171 struct hermes_tx_descriptor desc
;
175 } __attribute__ ((packed
));
177 /* Rx frame header except compatibility 802.3 header */
178 struct hermes_rx_descriptor
{
199 } __attribute__ ((packed
));
201 struct orinoco_rx_data
{
202 struct hermes_rx_descriptor
*desc
;
204 struct list_head list
;
207 struct orinoco_scan_data
{
211 struct list_head list
;
214 /********************************************************************/
215 /* Function prototypes */
216 /********************************************************************/
218 static int __orinoco_set_multicast_list(struct net_device
*dev
);
219 static int __orinoco_up(struct orinoco_private
*priv
);
220 static int __orinoco_down(struct orinoco_private
*priv
);
221 static int __orinoco_commit(struct orinoco_private
*priv
);
223 /********************************************************************/
224 /* Internal helper functions */
225 /********************************************************************/
227 void set_port_type(struct orinoco_private
*priv
)
229 switch (priv
->iw_mode
) {
230 case NL80211_IFTYPE_STATION
:
232 priv
->createibss
= 0;
234 case NL80211_IFTYPE_ADHOC
:
235 if (priv
->prefer_port3
) {
237 priv
->createibss
= 0;
239 priv
->port_type
= priv
->ibss_port
;
240 priv
->createibss
= 1;
243 case NL80211_IFTYPE_MONITOR
:
245 priv
->createibss
= 0;
248 printk(KERN_ERR
"%s: Invalid priv->iw_mode in set_port_type()\n",
253 /********************************************************************/
255 /********************************************************************/
257 static int orinoco_open(struct net_device
*dev
)
259 struct orinoco_private
*priv
= ndev_priv(dev
);
263 if (orinoco_lock(priv
, &flags
) != 0)
266 err
= __orinoco_up(priv
);
271 orinoco_unlock(priv
, &flags
);
276 static int orinoco_stop(struct net_device
*dev
)
278 struct orinoco_private
*priv
= ndev_priv(dev
);
281 /* We mustn't use orinoco_lock() here, because we need to be
282 able to close the interface even if hw_unavailable is set
283 (e.g. as we're released after a PC Card removal) */
284 spin_lock_irq(&priv
->lock
);
288 err
= __orinoco_down(priv
);
290 spin_unlock_irq(&priv
->lock
);
295 static struct net_device_stats
*orinoco_get_stats(struct net_device
*dev
)
297 struct orinoco_private
*priv
= ndev_priv(dev
);
302 static void orinoco_set_multicast_list(struct net_device
*dev
)
304 struct orinoco_private
*priv
= ndev_priv(dev
);
307 if (orinoco_lock(priv
, &flags
) != 0) {
308 printk(KERN_DEBUG
"%s: orinoco_set_multicast_list() "
309 "called when hw_unavailable\n", dev
->name
);
313 __orinoco_set_multicast_list(dev
);
314 orinoco_unlock(priv
, &flags
);
317 static int orinoco_change_mtu(struct net_device
*dev
, int new_mtu
)
319 struct orinoco_private
*priv
= ndev_priv(dev
);
321 if ((new_mtu
< ORINOCO_MIN_MTU
) || (new_mtu
> ORINOCO_MAX_MTU
))
324 /* MTU + encapsulation + header length */
325 if ((new_mtu
+ ENCAPS_OVERHEAD
+ sizeof(struct ieee80211_hdr
)) >
326 (priv
->nicbuf_size
- ETH_HLEN
))
334 /********************************************************************/
336 /********************************************************************/
338 static netdev_tx_t
orinoco_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
340 struct orinoco_private
*priv
= ndev_priv(dev
);
341 struct net_device_stats
*stats
= &priv
->stats
;
342 struct orinoco_tkip_key
*key
;
343 hermes_t
*hw
= &priv
->hw
;
345 u16 txfid
= priv
->txfid
;
351 if (!netif_running(dev
)) {
352 printk(KERN_ERR
"%s: Tx on stopped device!\n",
354 return NETDEV_TX_BUSY
;
357 if (netif_queue_stopped(dev
)) {
358 printk(KERN_DEBUG
"%s: Tx while transmitter busy!\n",
360 return NETDEV_TX_BUSY
;
363 if (orinoco_lock(priv
, &flags
) != 0) {
364 printk(KERN_ERR
"%s: orinoco_xmit() called while hw_unavailable\n",
366 return NETDEV_TX_BUSY
;
369 if (!netif_carrier_ok(dev
) ||
370 (priv
->iw_mode
== NL80211_IFTYPE_MONITOR
)) {
371 /* Oops, the firmware hasn't established a connection,
372 silently drop the packet (this seems to be the
377 /* Check packet length */
378 if (skb
->len
< ETH_HLEN
)
381 key
= (struct orinoco_tkip_key
*) priv
->keys
[priv
->tx_key
].key
;
383 do_mic
= ((priv
->encode_alg
== ORINOCO_ALG_TKIP
) &&
386 tx_control
= HERMES_TXCTRL_TX_OK
| HERMES_TXCTRL_TX_EX
;
389 tx_control
|= (priv
->tx_key
<< HERMES_MIC_KEY_ID_SHIFT
) |
392 if (priv
->has_alt_txcntl
) {
393 /* WPA enabled firmwares have tx_cntl at the end of
394 * the 802.11 header. So write zeroed descriptor and
395 * 802.11 header at the same time
397 char desc
[HERMES_802_3_OFFSET
];
398 __le16
*txcntl
= (__le16
*) &desc
[HERMES_TXCNTL2_OFFSET
];
400 memset(&desc
, 0, sizeof(desc
));
402 *txcntl
= cpu_to_le16(tx_control
);
403 err
= hermes_bap_pwrite(hw
, USER_BAP
, &desc
, sizeof(desc
),
407 printk(KERN_ERR
"%s: Error %d writing Tx "
408 "descriptor to BAP\n", dev
->name
, err
);
412 struct hermes_tx_descriptor desc
;
414 memset(&desc
, 0, sizeof(desc
));
416 desc
.tx_control
= cpu_to_le16(tx_control
);
417 err
= hermes_bap_pwrite(hw
, USER_BAP
, &desc
, sizeof(desc
),
421 printk(KERN_ERR
"%s: Error %d writing Tx "
422 "descriptor to BAP\n", dev
->name
, err
);
426 /* Clear the 802.11 header and data length fields - some
427 * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
428 * if this isn't done. */
429 hermes_clear_words(hw
, HERMES_DATA0
,
430 HERMES_802_3_OFFSET
- HERMES_802_11_OFFSET
);
433 eh
= (struct ethhdr
*)skb
->data
;
435 /* Encapsulate Ethernet-II frames */
436 if (ntohs(eh
->h_proto
) > ETH_DATA_LEN
) { /* Ethernet-II frame */
437 struct header_struct
{
438 struct ethhdr eth
; /* 802.3 header */
439 u8 encap
[6]; /* 802.2 header */
440 } __attribute__ ((packed
)) hdr
;
442 /* Strip destination and source from the data */
443 skb_pull(skb
, 2 * ETH_ALEN
);
445 /* And move them to a separate header */
446 memcpy(&hdr
.eth
, eh
, 2 * ETH_ALEN
);
447 hdr
.eth
.h_proto
= htons(sizeof(encaps_hdr
) + skb
->len
);
448 memcpy(hdr
.encap
, encaps_hdr
, sizeof(encaps_hdr
));
450 /* Insert the SNAP header */
451 if (skb_headroom(skb
) < sizeof(hdr
)) {
453 "%s: Not enough headroom for 802.2 headers %d\n",
454 dev
->name
, skb_headroom(skb
));
457 eh
= (struct ethhdr
*) skb_push(skb
, sizeof(hdr
));
458 memcpy(eh
, &hdr
, sizeof(hdr
));
461 err
= hermes_bap_pwrite(hw
, USER_BAP
, skb
->data
, skb
->len
,
462 txfid
, HERMES_802_3_OFFSET
);
464 printk(KERN_ERR
"%s: Error %d writing packet to BAP\n",
469 /* Calculate Michael MIC */
471 u8 mic_buf
[MICHAEL_MIC_LEN
+ 1];
477 /* MIC start is on an odd boundary */
478 mic_buf
[0] = skb
->data
[skb
->len
- 1];
480 offset
= skb
->len
- 1;
481 len
= MICHAEL_MIC_LEN
+ 1;
485 len
= MICHAEL_MIC_LEN
;
488 orinoco_mic(priv
->tx_tfm_mic
, key
->tx_mic
,
489 eh
->h_dest
, eh
->h_source
, 0 /* priority */,
490 skb
->data
+ ETH_HLEN
, skb
->len
- ETH_HLEN
, mic
);
493 err
= hermes_bap_pwrite(hw
, USER_BAP
, &mic_buf
[0], len
,
494 txfid
, HERMES_802_3_OFFSET
+ offset
);
496 printk(KERN_ERR
"%s: Error %d writing MIC to BAP\n",
502 /* Finally, we actually initiate the send */
503 netif_stop_queue(dev
);
505 err
= hermes_docmd_wait(hw
, HERMES_CMD_TX
| HERMES_CMD_RECL
,
508 netif_start_queue(dev
);
510 printk(KERN_ERR
"%s: Error %d transmitting packet\n",
515 dev
->trans_start
= jiffies
;
516 stats
->tx_bytes
+= HERMES_802_3_OFFSET
+ skb
->len
;
524 orinoco_unlock(priv
, &flags
);
530 schedule_work(&priv
->reset_work
);
531 orinoco_unlock(priv
, &flags
);
532 return NETDEV_TX_BUSY
;
535 static void __orinoco_ev_alloc(struct net_device
*dev
, hermes_t
*hw
)
537 struct orinoco_private
*priv
= ndev_priv(dev
);
538 u16 fid
= hermes_read_regn(hw
, ALLOCFID
);
540 if (fid
!= priv
->txfid
) {
541 if (fid
!= DUMMY_FID
)
542 printk(KERN_WARNING
"%s: Allocate event on unexpected fid (%04X)\n",
547 hermes_write_regn(hw
, ALLOCFID
, DUMMY_FID
);
550 static void __orinoco_ev_tx(struct net_device
*dev
, hermes_t
*hw
)
552 struct orinoco_private
*priv
= ndev_priv(dev
);
553 struct net_device_stats
*stats
= &priv
->stats
;
557 netif_wake_queue(dev
);
559 hermes_write_regn(hw
, TXCOMPLFID
, DUMMY_FID
);
562 static void __orinoco_ev_txexc(struct net_device
*dev
, hermes_t
*hw
)
564 struct orinoco_private
*priv
= ndev_priv(dev
);
565 struct net_device_stats
*stats
= &priv
->stats
;
566 u16 fid
= hermes_read_regn(hw
, TXCOMPLFID
);
568 struct hermes_txexc_data hdr
;
571 if (fid
== DUMMY_FID
)
572 return; /* Nothing's really happened */
574 /* Read part of the frame header - we need status and addr1 */
575 err
= hermes_bap_pread(hw
, IRQ_BAP
, &hdr
,
576 sizeof(struct hermes_txexc_data
),
579 hermes_write_regn(hw
, TXCOMPLFID
, DUMMY_FID
);
583 printk(KERN_WARNING
"%s: Unable to read descriptor on Tx error "
584 "(FID=%04X error %d)\n",
585 dev
->name
, fid
, err
);
589 DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev
->name
,
592 /* We produce a TXDROP event only for retry or lifetime
593 * exceeded, because that's the only status that really mean
594 * that this particular node went away.
595 * Other errors means that *we* screwed up. - Jean II */
596 status
= le16_to_cpu(hdr
.desc
.status
);
597 if (status
& (HERMES_TXSTAT_RETRYERR
| HERMES_TXSTAT_AGEDERR
)) {
598 union iwreq_data wrqu
;
600 /* Copy 802.11 dest address.
601 * We use the 802.11 header because the frame may
602 * not be 802.3 or may be mangled...
603 * In Ad-Hoc mode, it will be the node address.
604 * In managed mode, it will be most likely the AP addr
605 * User space will figure out how to convert it to
606 * whatever it needs (IP address or else).
608 memcpy(wrqu
.addr
.sa_data
, hdr
.addr1
, ETH_ALEN
);
609 wrqu
.addr
.sa_family
= ARPHRD_ETHER
;
611 /* Send event to user space */
612 wireless_send_event(dev
, IWEVTXDROP
, &wrqu
, NULL
);
615 netif_wake_queue(dev
);
618 static void orinoco_tx_timeout(struct net_device
*dev
)
620 struct orinoco_private
*priv
= ndev_priv(dev
);
621 struct net_device_stats
*stats
= &priv
->stats
;
622 struct hermes
*hw
= &priv
->hw
;
624 printk(KERN_WARNING
"%s: Tx timeout! "
625 "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
626 dev
->name
, hermes_read_regn(hw
, ALLOCFID
),
627 hermes_read_regn(hw
, TXCOMPLFID
), hermes_read_regn(hw
, EVSTAT
));
631 schedule_work(&priv
->reset_work
);
634 /********************************************************************/
635 /* Rx path (data frames) */
636 /********************************************************************/
638 /* Does the frame have a SNAP header indicating it should be
639 * de-encapsulated to Ethernet-II? */
640 static inline int is_ethersnap(void *_hdr
)
644 /* We de-encapsulate all packets which, a) have SNAP headers
645 * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
646 * and where b) the OUI of the SNAP header is 00:00:00 or
647 * 00:00:f8 - we need both because different APs appear to use
648 * different OUIs for some reason */
649 return (memcmp(hdr
, &encaps_hdr
, 5) == 0)
650 && ((hdr
[5] == 0x00) || (hdr
[5] == 0xf8));
653 static inline void orinoco_spy_gather(struct net_device
*dev
, u_char
*mac
,
654 int level
, int noise
)
656 struct iw_quality wstats
;
657 wstats
.level
= level
- 0x95;
658 wstats
.noise
= noise
- 0x95;
659 wstats
.qual
= (level
> noise
) ? (level
- noise
) : 0;
660 wstats
.updated
= IW_QUAL_ALL_UPDATED
| IW_QUAL_DBM
;
661 /* Update spy records */
662 wireless_spy_update(dev
, mac
, &wstats
);
665 static void orinoco_stat_gather(struct net_device
*dev
,
667 struct hermes_rx_descriptor
*desc
)
669 struct orinoco_private
*priv
= ndev_priv(dev
);
671 /* Using spy support with lots of Rx packets, like in an
672 * infrastructure (AP), will really slow down everything, because
673 * the MAC address must be compared to each entry of the spy list.
674 * If the user really asks for it (set some address in the
675 * spy list), we do it, but he will pay the price.
676 * Note that to get here, you need both WIRELESS_SPY
677 * compiled in AND some addresses in the list !!!
679 /* Note : gcc will optimise the whole section away if
680 * WIRELESS_SPY is not defined... - Jean II */
681 if (SPY_NUMBER(priv
)) {
682 orinoco_spy_gather(dev
, skb_mac_header(skb
) + ETH_ALEN
,
683 desc
->signal
, desc
->silence
);
688 * orinoco_rx_monitor - handle received monitor frames.
693 * desc rx descriptor of the frame
695 * Call context: interrupt
697 static void orinoco_rx_monitor(struct net_device
*dev
, u16 rxfid
,
698 struct hermes_rx_descriptor
*desc
)
700 u32 hdrlen
= 30; /* return full header by default */
706 struct orinoco_private
*priv
= ndev_priv(dev
);
707 struct net_device_stats
*stats
= &priv
->stats
;
708 hermes_t
*hw
= &priv
->hw
;
710 len
= le16_to_cpu(desc
->data_len
);
712 /* Determine the size of the header and the data */
713 fc
= le16_to_cpu(desc
->frame_ctl
);
714 switch (fc
& IEEE80211_FCTL_FTYPE
) {
715 case IEEE80211_FTYPE_DATA
:
716 if ((fc
& IEEE80211_FCTL_TODS
)
717 && (fc
& IEEE80211_FCTL_FROMDS
))
723 case IEEE80211_FTYPE_MGMT
:
727 case IEEE80211_FTYPE_CTL
:
728 switch (fc
& IEEE80211_FCTL_STYPE
) {
729 case IEEE80211_STYPE_PSPOLL
:
730 case IEEE80211_STYPE_RTS
:
731 case IEEE80211_STYPE_CFEND
:
732 case IEEE80211_STYPE_CFENDACK
:
735 case IEEE80211_STYPE_CTS
:
736 case IEEE80211_STYPE_ACK
:
742 /* Unknown frame type */
746 /* sanity check the length */
747 if (datalen
> IEEE80211_MAX_DATA_LEN
+ 12) {
748 printk(KERN_DEBUG
"%s: oversized monitor frame, "
749 "data length = %d\n", dev
->name
, datalen
);
750 stats
->rx_length_errors
++;
754 skb
= dev_alloc_skb(hdrlen
+ datalen
);
756 printk(KERN_WARNING
"%s: Cannot allocate skb for monitor frame\n",
761 /* Copy the 802.11 header to the skb */
762 memcpy(skb_put(skb
, hdrlen
), &(desc
->frame_ctl
), hdrlen
);
763 skb_reset_mac_header(skb
);
765 /* If any, copy the data from the card to the skb */
767 err
= hermes_bap_pread(hw
, IRQ_BAP
, skb_put(skb
, datalen
),
768 ALIGN(datalen
, 2), rxfid
,
769 HERMES_802_2_OFFSET
);
771 printk(KERN_ERR
"%s: error %d reading monitor frame\n",
778 skb
->ip_summed
= CHECKSUM_NONE
;
779 skb
->pkt_type
= PACKET_OTHERHOST
;
780 skb
->protocol
= cpu_to_be16(ETH_P_802_2
);
783 stats
->rx_bytes
+= skb
->len
;
789 dev_kfree_skb_irq(skb
);
795 static void __orinoco_ev_rx(struct net_device
*dev
, hermes_t
*hw
)
797 struct orinoco_private
*priv
= ndev_priv(dev
);
798 struct net_device_stats
*stats
= &priv
->stats
;
799 struct iw_statistics
*wstats
= &priv
->wstats
;
800 struct sk_buff
*skb
= NULL
;
803 struct hermes_rx_descriptor
*desc
;
804 struct orinoco_rx_data
*rx_data
;
807 desc
= kmalloc(sizeof(*desc
), GFP_ATOMIC
);
810 "%s: Can't allocate space for RX descriptor\n",
815 rxfid
= hermes_read_regn(hw
, RXFID
);
817 err
= hermes_bap_pread(hw
, IRQ_BAP
, desc
, sizeof(*desc
),
820 printk(KERN_ERR
"%s: error %d reading Rx descriptor. "
821 "Frame dropped.\n", dev
->name
, err
);
825 status
= le16_to_cpu(desc
->status
);
827 if (status
& HERMES_RXSTAT_BADCRC
) {
828 DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n",
830 stats
->rx_crc_errors
++;
834 /* Handle frames in monitor mode */
835 if (priv
->iw_mode
== NL80211_IFTYPE_MONITOR
) {
836 orinoco_rx_monitor(dev
, rxfid
, desc
);
840 if (status
& HERMES_RXSTAT_UNDECRYPTABLE
) {
841 DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
843 wstats
->discard
.code
++;
847 length
= le16_to_cpu(desc
->data_len
);
850 if (length
< 3) { /* No for even an 802.2 LLC header */
851 /* At least on Symbol firmware with PCF we get quite a
852 lot of these legitimately - Poll frames with no
856 if (length
> IEEE80211_MAX_DATA_LEN
) {
857 printk(KERN_WARNING
"%s: Oversized frame received (%d bytes)\n",
859 stats
->rx_length_errors
++;
863 /* Payload size does not include Michael MIC. Increase payload
864 * size to read it together with the data. */
865 if (status
& HERMES_RXSTAT_MIC
)
866 length
+= MICHAEL_MIC_LEN
;
868 /* We need space for the packet data itself, plus an ethernet
869 header, plus 2 bytes so we can align the IP header on a
870 32bit boundary, plus 1 byte so we can read in odd length
871 packets from the card, which has an IO granularity of 16
873 skb
= dev_alloc_skb(length
+ETH_HLEN
+2+1);
875 printk(KERN_WARNING
"%s: Can't allocate skb for Rx\n",
880 /* We'll prepend the header, so reserve space for it. The worst
881 case is no decapsulation, when 802.3 header is prepended and
882 nothing is removed. 2 is for aligning the IP header. */
883 skb_reserve(skb
, ETH_HLEN
+ 2);
885 err
= hermes_bap_pread(hw
, IRQ_BAP
, skb_put(skb
, length
),
886 ALIGN(length
, 2), rxfid
,
887 HERMES_802_2_OFFSET
);
889 printk(KERN_ERR
"%s: error %d reading frame. "
890 "Frame dropped.\n", dev
->name
, err
);
894 /* Add desc and skb to rx queue */
895 rx_data
= kzalloc(sizeof(*rx_data
), GFP_ATOMIC
);
897 printk(KERN_WARNING
"%s: Can't allocate RX packet\n",
901 rx_data
->desc
= desc
;
903 list_add_tail(&rx_data
->list
, &priv
->rx_list
);
904 tasklet_schedule(&priv
->rx_tasklet
);
909 dev_kfree_skb_irq(skb
);
917 static void orinoco_rx(struct net_device
*dev
,
918 struct hermes_rx_descriptor
*desc
,
921 struct orinoco_private
*priv
= ndev_priv(dev
);
922 struct net_device_stats
*stats
= &priv
->stats
;
927 status
= le16_to_cpu(desc
->status
);
928 length
= le16_to_cpu(desc
->data_len
);
929 fc
= le16_to_cpu(desc
->frame_ctl
);
931 /* Calculate and check MIC */
932 if (status
& HERMES_RXSTAT_MIC
) {
933 struct orinoco_tkip_key
*key
;
934 int key_id
= ((status
& HERMES_RXSTAT_MIC_KEY_ID
) >>
935 HERMES_MIC_KEY_ID_SHIFT
);
936 u8 mic
[MICHAEL_MIC_LEN
];
938 u8
*src
= (fc
& IEEE80211_FCTL_FROMDS
) ?
939 desc
->addr3
: desc
->addr2
;
941 /* Extract Michael MIC from payload */
942 rxmic
= skb
->data
+ skb
->len
- MICHAEL_MIC_LEN
;
944 skb_trim(skb
, skb
->len
- MICHAEL_MIC_LEN
);
945 length
-= MICHAEL_MIC_LEN
;
947 key
= (struct orinoco_tkip_key
*) priv
->keys
[key_id
].key
;
950 printk(KERN_WARNING
"%s: Received encrypted frame from "
951 "%pM using key %i, but key is not installed\n",
952 dev
->name
, src
, key_id
);
956 orinoco_mic(priv
->rx_tfm_mic
, key
->rx_mic
, desc
->addr1
, src
,
957 0, /* priority or QoS? */
958 skb
->data
, skb
->len
, &mic
[0]);
960 if (memcmp(mic
, rxmic
,
962 union iwreq_data wrqu
;
963 struct iw_michaelmicfailure wxmic
;
965 printk(KERN_WARNING
"%s: "
966 "Invalid Michael MIC in data frame from %pM, "
968 dev
->name
, src
, key_id
);
970 /* TODO: update stats */
972 /* Notify userspace */
973 memset(&wxmic
, 0, sizeof(wxmic
));
974 wxmic
.flags
= key_id
& IW_MICFAILURE_KEY_ID
;
975 wxmic
.flags
|= (desc
->addr1
[0] & 1) ?
976 IW_MICFAILURE_GROUP
: IW_MICFAILURE_PAIRWISE
;
977 wxmic
.src_addr
.sa_family
= ARPHRD_ETHER
;
978 memcpy(wxmic
.src_addr
.sa_data
, src
, ETH_ALEN
);
980 (void) orinoco_hw_get_tkip_iv(priv
, key_id
,
983 memset(&wrqu
, 0, sizeof(wrqu
));
984 wrqu
.data
.length
= sizeof(wxmic
);
985 wireless_send_event(dev
, IWEVMICHAELMICFAILURE
, &wrqu
,
992 /* Handle decapsulation
993 * In most cases, the firmware tell us about SNAP frames.
994 * For some reason, the SNAP frames sent by LinkSys APs
995 * are not properly recognised by most firmwares.
996 * So, check ourselves */
997 if (length
>= ENCAPS_OVERHEAD
&&
998 (((status
& HERMES_RXSTAT_MSGTYPE
) == HERMES_RXSTAT_1042
) ||
999 ((status
& HERMES_RXSTAT_MSGTYPE
) == HERMES_RXSTAT_TUNNEL
) ||
1000 is_ethersnap(skb
->data
))) {
1001 /* These indicate a SNAP within 802.2 LLC within
1002 802.11 frame which we'll need to de-encapsulate to
1003 the original EthernetII frame. */
1004 hdr
= (struct ethhdr
*)skb_push(skb
,
1005 ETH_HLEN
- ENCAPS_OVERHEAD
);
1007 /* 802.3 frame - prepend 802.3 header as is */
1008 hdr
= (struct ethhdr
*)skb_push(skb
, ETH_HLEN
);
1009 hdr
->h_proto
= htons(length
);
1011 memcpy(hdr
->h_dest
, desc
->addr1
, ETH_ALEN
);
1012 if (fc
& IEEE80211_FCTL_FROMDS
)
1013 memcpy(hdr
->h_source
, desc
->addr3
, ETH_ALEN
);
1015 memcpy(hdr
->h_source
, desc
->addr2
, ETH_ALEN
);
1017 skb
->protocol
= eth_type_trans(skb
, dev
);
1018 skb
->ip_summed
= CHECKSUM_NONE
;
1019 if (fc
& IEEE80211_FCTL_TODS
)
1020 skb
->pkt_type
= PACKET_OTHERHOST
;
1022 /* Process the wireless stats if needed */
1023 orinoco_stat_gather(dev
, skb
, desc
);
1025 /* Pass the packet to the networking stack */
1027 stats
->rx_packets
++;
1028 stats
->rx_bytes
+= length
;
1035 stats
->rx_dropped
++;
1038 static void orinoco_rx_isr_tasklet(unsigned long data
)
1040 struct orinoco_private
*priv
= (struct orinoco_private
*) data
;
1041 struct net_device
*dev
= priv
->ndev
;
1042 struct orinoco_rx_data
*rx_data
, *temp
;
1043 struct hermes_rx_descriptor
*desc
;
1044 struct sk_buff
*skb
;
1045 unsigned long flags
;
1047 /* orinoco_rx requires the driver lock, and we also need to
1048 * protect priv->rx_list, so just hold the lock over the
1051 * If orinoco_lock fails, we've unplugged the card. In this
1052 * case just abort. */
1053 if (orinoco_lock(priv
, &flags
) != 0)
1056 /* extract desc and skb from queue */
1057 list_for_each_entry_safe(rx_data
, temp
, &priv
->rx_list
, list
) {
1058 desc
= rx_data
->desc
;
1060 list_del(&rx_data
->list
);
1063 orinoco_rx(dev
, desc
, skb
);
1068 orinoco_unlock(priv
, &flags
);
1071 /********************************************************************/
1072 /* Rx path (info frames) */
1073 /********************************************************************/
1075 static void print_linkstatus(struct net_device
*dev
, u16 status
)
1079 if (suppress_linkstatus
)
1083 case HERMES_LINKSTATUS_NOT_CONNECTED
:
1084 s
= "Not Connected";
1086 case HERMES_LINKSTATUS_CONNECTED
:
1089 case HERMES_LINKSTATUS_DISCONNECTED
:
1092 case HERMES_LINKSTATUS_AP_CHANGE
:
1095 case HERMES_LINKSTATUS_AP_OUT_OF_RANGE
:
1096 s
= "AP Out of Range";
1098 case HERMES_LINKSTATUS_AP_IN_RANGE
:
1101 case HERMES_LINKSTATUS_ASSOC_FAILED
:
1102 s
= "Association Failed";
1108 printk(KERN_DEBUG
"%s: New link status: %s (%04x)\n",
1109 dev
->name
, s
, status
);
1112 /* Search scan results for requested BSSID, join it if found */
1113 static void orinoco_join_ap(struct work_struct
*work
)
1115 struct orinoco_private
*priv
=
1116 container_of(work
, struct orinoco_private
, join_work
);
1117 struct net_device
*dev
= priv
->ndev
;
1118 struct hermes
*hw
= &priv
->hw
;
1120 unsigned long flags
;
1124 } __attribute__ ((packed
)) req
;
1125 const int atom_len
= offsetof(struct prism2_scan_apinfo
, atim
);
1126 struct prism2_scan_apinfo
*atom
= NULL
;
1132 /* Allocate buffer for scan results */
1133 buf
= kmalloc(MAX_SCAN_LEN
, GFP_KERNEL
);
1137 if (orinoco_lock(priv
, &flags
) != 0)
1140 /* Sanity checks in case user changed something in the meantime */
1141 if (!priv
->bssid_fixed
)
1144 if (strlen(priv
->desired_essid
) == 0)
1147 /* Read scan results from the firmware */
1148 err
= hermes_read_ltv(hw
, USER_BAP
,
1149 HERMES_RID_SCANRESULTSTABLE
,
1150 MAX_SCAN_LEN
, &len
, buf
);
1152 printk(KERN_ERR
"%s: Cannot read scan results\n",
1157 len
= HERMES_RECLEN_TO_BYTES(len
);
1159 /* Go through the scan results looking for the channel of the AP
1160 * we were requested to join */
1161 for (; offset
+ atom_len
<= len
; offset
+= atom_len
) {
1162 atom
= (struct prism2_scan_apinfo
*) (buf
+ offset
);
1163 if (memcmp(&atom
->bssid
, priv
->desired_bssid
, ETH_ALEN
) == 0) {
1170 DEBUG(1, "%s: Requested AP not found in scan results\n",
1175 memcpy(req
.bssid
, priv
->desired_bssid
, ETH_ALEN
);
1176 req
.channel
= atom
->channel
; /* both are little-endian */
1177 err
= HERMES_WRITE_RECORD(hw
, USER_BAP
, HERMES_RID_CNFJOINREQUEST
,
1180 printk(KERN_ERR
"%s: Error issuing join request\n", dev
->name
);
1183 orinoco_unlock(priv
, &flags
);
1189 /* Send new BSSID to userspace */
1190 static void orinoco_send_bssid_wevent(struct orinoco_private
*priv
)
1192 struct net_device
*dev
= priv
->ndev
;
1193 struct hermes
*hw
= &priv
->hw
;
1194 union iwreq_data wrqu
;
1197 err
= hermes_read_ltv(hw
, USER_BAP
, HERMES_RID_CURRENTBSSID
,
1198 ETH_ALEN
, NULL
, wrqu
.ap_addr
.sa_data
);
1202 wrqu
.ap_addr
.sa_family
= ARPHRD_ETHER
;
1204 /* Send event to user space */
1205 wireless_send_event(dev
, SIOCGIWAP
, &wrqu
, NULL
);
1208 static void orinoco_send_assocreqie_wevent(struct orinoco_private
*priv
)
1210 struct net_device
*dev
= priv
->ndev
;
1211 struct hermes
*hw
= &priv
->hw
;
1212 union iwreq_data wrqu
;
1220 err
= hermes_read_ltv(hw
, USER_BAP
, HERMES_RID_CURRENT_ASSOC_REQ_INFO
,
1221 sizeof(buf
), NULL
, &buf
);
1225 ie
= orinoco_get_wpa_ie(buf
, sizeof(buf
));
1227 int rem
= sizeof(buf
) - (ie
- &buf
[0]);
1228 wrqu
.data
.length
= ie
[1] + 2;
1229 if (wrqu
.data
.length
> rem
)
1230 wrqu
.data
.length
= rem
;
1232 if (wrqu
.data
.length
)
1233 /* Send event to user space */
1234 wireless_send_event(dev
, IWEVASSOCREQIE
, &wrqu
, ie
);
1238 static void orinoco_send_assocrespie_wevent(struct orinoco_private
*priv
)
1240 struct net_device
*dev
= priv
->ndev
;
1241 struct hermes
*hw
= &priv
->hw
;
1242 union iwreq_data wrqu
;
1244 u8 buf
[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */
1250 err
= hermes_read_ltv(hw
, USER_BAP
, HERMES_RID_CURRENT_ASSOC_RESP_INFO
,
1251 sizeof(buf
), NULL
, &buf
);
1255 ie
= orinoco_get_wpa_ie(buf
, sizeof(buf
));
1257 int rem
= sizeof(buf
) - (ie
- &buf
[0]);
1258 wrqu
.data
.length
= ie
[1] + 2;
1259 if (wrqu
.data
.length
> rem
)
1260 wrqu
.data
.length
= rem
;
1262 if (wrqu
.data
.length
)
1263 /* Send event to user space */
1264 wireless_send_event(dev
, IWEVASSOCRESPIE
, &wrqu
, ie
);
1268 static void orinoco_send_wevents(struct work_struct
*work
)
1270 struct orinoco_private
*priv
=
1271 container_of(work
, struct orinoco_private
, wevent_work
);
1272 unsigned long flags
;
1274 if (orinoco_lock(priv
, &flags
) != 0)
1277 orinoco_send_assocreqie_wevent(priv
);
1278 orinoco_send_assocrespie_wevent(priv
);
1279 orinoco_send_bssid_wevent(priv
);
1281 orinoco_unlock(priv
, &flags
);
1284 static void qbuf_scan(struct orinoco_private
*priv
, void *buf
,
1287 struct orinoco_scan_data
*sd
;
1288 unsigned long flags
;
1290 sd
= kmalloc(sizeof(*sd
), GFP_ATOMIC
);
1295 spin_lock_irqsave(&priv
->scan_lock
, flags
);
1296 list_add_tail(&sd
->list
, &priv
->scan_list
);
1297 spin_unlock_irqrestore(&priv
->scan_lock
, flags
);
1299 schedule_work(&priv
->process_scan
);
1302 static void qabort_scan(struct orinoco_private
*priv
)
1304 struct orinoco_scan_data
*sd
;
1305 unsigned long flags
;
1307 sd
= kmalloc(sizeof(*sd
), GFP_ATOMIC
);
1308 sd
->len
= -1; /* Abort */
1310 spin_lock_irqsave(&priv
->scan_lock
, flags
);
1311 list_add_tail(&sd
->list
, &priv
->scan_list
);
1312 spin_unlock_irqrestore(&priv
->scan_lock
, flags
);
1314 schedule_work(&priv
->process_scan
);
1317 static void orinoco_process_scan_results(struct work_struct
*work
)
1319 struct orinoco_private
*priv
=
1320 container_of(work
, struct orinoco_private
, process_scan
);
1321 struct orinoco_scan_data
*sd
, *temp
;
1322 unsigned long flags
;
1327 spin_lock_irqsave(&priv
->scan_lock
, flags
);
1328 list_for_each_entry_safe(sd
, temp
, &priv
->scan_list
, list
) {
1329 spin_unlock_irqrestore(&priv
->scan_lock
, flags
);
1335 list_del(&sd
->list
);
1339 if (type
== HERMES_INQ_CHANNELINFO
)
1340 orinoco_add_extscan_result(priv
, buf
, len
);
1342 orinoco_add_hostscan_results(priv
, buf
, len
);
1345 } else if (priv
->scan_request
) {
1346 /* Either abort or complete the scan */
1347 cfg80211_scan_done(priv
->scan_request
, (len
< 0));
1348 priv
->scan_request
= NULL
;
1351 spin_lock_irqsave(&priv
->scan_lock
, flags
);
1353 spin_unlock_irqrestore(&priv
->scan_lock
, flags
);
1356 static void __orinoco_ev_info(struct net_device
*dev
, hermes_t
*hw
)
1358 struct orinoco_private
*priv
= ndev_priv(dev
);
1363 } __attribute__ ((packed
)) info
;
1367 /* This is an answer to an INQUIRE command that we did earlier,
1368 * or an information "event" generated by the card
1369 * The controller return to us a pseudo frame containing
1370 * the information in question - Jean II */
1371 infofid
= hermes_read_regn(hw
, INFOFID
);
1373 /* Read the info frame header - don't try too hard */
1374 err
= hermes_bap_pread(hw
, IRQ_BAP
, &info
, sizeof(info
),
1377 printk(KERN_ERR
"%s: error %d reading info frame. "
1378 "Frame dropped.\n", dev
->name
, err
);
1382 len
= HERMES_RECLEN_TO_BYTES(le16_to_cpu(info
.len
));
1383 type
= le16_to_cpu(info
.type
);
1386 case HERMES_INQ_TALLIES
: {
1387 struct hermes_tallies_frame tallies
;
1388 struct iw_statistics
*wstats
= &priv
->wstats
;
1390 if (len
> sizeof(tallies
)) {
1391 printk(KERN_WARNING
"%s: Tallies frame too long (%d bytes)\n",
1393 len
= sizeof(tallies
);
1396 err
= hermes_bap_pread(hw
, IRQ_BAP
, &tallies
, len
,
1397 infofid
, sizeof(info
));
1401 /* Increment our various counters */
1402 /* wstats->discard.nwid - no wrong BSSID stuff */
1403 wstats
->discard
.code
+=
1404 le16_to_cpu(tallies
.RxWEPUndecryptable
);
1405 if (len
== sizeof(tallies
))
1406 wstats
->discard
.code
+=
1407 le16_to_cpu(tallies
.RxDiscards_WEPICVError
) +
1408 le16_to_cpu(tallies
.RxDiscards_WEPExcluded
);
1409 wstats
->discard
.misc
+=
1410 le16_to_cpu(tallies
.TxDiscardsWrongSA
);
1411 wstats
->discard
.fragment
+=
1412 le16_to_cpu(tallies
.RxMsgInBadMsgFragments
);
1413 wstats
->discard
.retries
+=
1414 le16_to_cpu(tallies
.TxRetryLimitExceeded
);
1415 /* wstats->miss.beacon - no match */
1418 case HERMES_INQ_LINKSTATUS
: {
1419 struct hermes_linkstatus linkstatus
;
1423 if (priv
->iw_mode
== NL80211_IFTYPE_MONITOR
)
1426 if (len
!= sizeof(linkstatus
)) {
1427 printk(KERN_WARNING
"%s: Unexpected size for linkstatus frame (%d bytes)\n",
1432 err
= hermes_bap_pread(hw
, IRQ_BAP
, &linkstatus
, len
,
1433 infofid
, sizeof(info
));
1436 newstatus
= le16_to_cpu(linkstatus
.linkstatus
);
1438 /* Symbol firmware uses "out of range" to signal that
1439 * the hostscan frame can be requested. */
1440 if (newstatus
== HERMES_LINKSTATUS_AP_OUT_OF_RANGE
&&
1441 priv
->firmware_type
== FIRMWARE_TYPE_SYMBOL
&&
1442 priv
->has_hostscan
&& priv
->scan_request
) {
1443 hermes_inquire(hw
, HERMES_INQ_HOSTSCAN_SYMBOL
);
1447 connected
= (newstatus
== HERMES_LINKSTATUS_CONNECTED
)
1448 || (newstatus
== HERMES_LINKSTATUS_AP_CHANGE
)
1449 || (newstatus
== HERMES_LINKSTATUS_AP_IN_RANGE
);
1452 netif_carrier_on(dev
);
1453 else if (!ignore_disconnect
)
1454 netif_carrier_off(dev
);
1456 if (newstatus
!= priv
->last_linkstatus
) {
1457 priv
->last_linkstatus
= newstatus
;
1458 print_linkstatus(dev
, newstatus
);
1459 /* The info frame contains only one word which is the
1460 * status (see hermes.h). The status is pretty boring
1461 * in itself, that's why we export the new BSSID...
1463 schedule_work(&priv
->wevent_work
);
1467 case HERMES_INQ_SCAN
:
1468 if (!priv
->scan_request
&& priv
->bssid_fixed
&&
1469 priv
->firmware_type
== FIRMWARE_TYPE_INTERSIL
) {
1470 schedule_work(&priv
->join_work
);
1474 case HERMES_INQ_HOSTSCAN
:
1475 case HERMES_INQ_HOSTSCAN_SYMBOL
: {
1476 /* Result of a scanning. Contains information about
1477 * cells in the vicinity - Jean II */
1482 printk(KERN_WARNING
"%s: Scan results too large (%d bytes)\n",
1488 /* Allocate buffer for results */
1489 buf
= kmalloc(len
, GFP_ATOMIC
);
1491 /* No memory, so can't printk()... */
1496 /* Read scan data */
1497 err
= hermes_bap_pread(hw
, IRQ_BAP
, (void *) buf
, len
,
1498 infofid
, sizeof(info
));
1505 #ifdef ORINOCO_DEBUG
1508 printk(KERN_DEBUG
"Scan result [%02X", buf
[0]);
1509 for (i
= 1; i
< (len
* 2); i
++)
1510 printk(":%02X", buf
[i
]);
1513 #endif /* ORINOCO_DEBUG */
1515 qbuf_scan(priv
, buf
, len
, type
);
1518 case HERMES_INQ_CHANNELINFO
:
1520 struct agere_ext_scan_info
*bss
;
1522 if (!priv
->scan_request
) {
1523 printk(KERN_DEBUG
"%s: Got chaninfo without scan, "
1524 "len=%d\n", dev
->name
, len
);
1528 /* An empty result indicates that the scan is complete */
1530 qbuf_scan(priv
, NULL
, len
, type
);
1535 else if (len
< (offsetof(struct agere_ext_scan_info
,
1537 /* Drop this result now so we don't have to
1538 * keep checking later */
1540 "%s: Ext scan results too short (%d bytes)\n",
1545 bss
= kmalloc(len
, GFP_ATOMIC
);
1549 /* Read scan data */
1550 err
= hermes_bap_pread(hw
, IRQ_BAP
, (void *) bss
, len
,
1551 infofid
, sizeof(info
));
1555 qbuf_scan(priv
, bss
, len
, type
);
1559 case HERMES_INQ_SEC_STAT_AGERE
:
1560 /* Security status (Agere specific) */
1561 /* Ignore this frame for now */
1562 if (priv
->firmware_type
== FIRMWARE_TYPE_AGERE
)
1566 printk(KERN_DEBUG
"%s: Unknown information frame received: "
1567 "type 0x%04x, length %d\n", dev
->name
, type
, len
);
1568 /* We don't actually do anything about it */
1575 static void __orinoco_ev_infdrop(struct net_device
*dev
, hermes_t
*hw
)
1577 if (net_ratelimit())
1578 printk(KERN_DEBUG
"%s: Information frame lost.\n", dev
->name
);
1581 /********************************************************************/
1582 /* Internal hardware control routines */
1583 /********************************************************************/
1585 static int __orinoco_up(struct orinoco_private
*priv
)
1587 struct net_device
*dev
= priv
->ndev
;
1588 struct hermes
*hw
= &priv
->hw
;
1591 netif_carrier_off(dev
); /* just to make sure */
1593 err
= __orinoco_commit(priv
);
1595 printk(KERN_ERR
"%s: Error %d configuring card\n",
1600 /* Fire things up again */
1601 hermes_set_irqmask(hw
, ORINOCO_INTEN
);
1602 err
= hermes_enable_port(hw
, 0);
1604 printk(KERN_ERR
"%s: Error %d enabling MAC port\n",
1609 netif_start_queue(dev
);
1614 static int __orinoco_down(struct orinoco_private
*priv
)
1616 struct net_device
*dev
= priv
->ndev
;
1617 struct hermes
*hw
= &priv
->hw
;
1620 netif_stop_queue(dev
);
1622 if (!priv
->hw_unavailable
) {
1623 if (!priv
->broken_disableport
) {
1624 err
= hermes_disable_port(hw
, 0);
1626 /* Some firmwares (e.g. Intersil 1.3.x) seem
1627 * to have problems disabling the port, oh
1629 printk(KERN_WARNING
"%s: Error %d disabling MAC port\n",
1631 priv
->broken_disableport
= 1;
1634 hermes_set_irqmask(hw
, 0);
1635 hermes_write_regn(hw
, EVACK
, 0xffff);
1638 /* firmware will have to reassociate */
1639 netif_carrier_off(dev
);
1640 priv
->last_linkstatus
= 0xffff;
1645 static int orinoco_reinit_firmware(struct orinoco_private
*priv
)
1647 struct hermes
*hw
= &priv
->hw
;
1650 err
= hermes_init(hw
);
1651 if (priv
->do_fw_download
&& !err
) {
1652 err
= orinoco_download(priv
);
1654 priv
->do_fw_download
= 0;
1657 err
= orinoco_hw_allocate_fid(priv
);
1663 __orinoco_set_multicast_list(struct net_device
*dev
)
1665 struct orinoco_private
*priv
= ndev_priv(dev
);
1667 int promisc
, mc_count
;
1669 /* The Hermes doesn't seem to have an allmulti mode, so we go
1670 * into promiscuous mode and let the upper levels deal. */
1671 if ((dev
->flags
& IFF_PROMISC
) || (dev
->flags
& IFF_ALLMULTI
) ||
1672 (netdev_mc_count(dev
) > MAX_MULTICAST(priv
))) {
1677 mc_count
= netdev_mc_count(dev
);
1680 err
= __orinoco_hw_set_multicast_list(priv
, dev
, mc_count
, promisc
);
1685 /* This must be called from user context, without locks held - use
1686 * schedule_work() */
1687 void orinoco_reset(struct work_struct
*work
)
1689 struct orinoco_private
*priv
=
1690 container_of(work
, struct orinoco_private
, reset_work
);
1691 struct net_device
*dev
= priv
->ndev
;
1692 struct hermes
*hw
= &priv
->hw
;
1694 unsigned long flags
;
1696 if (orinoco_lock(priv
, &flags
) != 0)
1697 /* When the hardware becomes available again, whatever
1698 * detects that is responsible for re-initializing
1699 * it. So no need for anything further */
1702 netif_stop_queue(dev
);
1704 /* Shut off interrupts. Depending on what state the hardware
1705 * is in, this might not work, but we'll try anyway */
1706 hermes_set_irqmask(hw
, 0);
1707 hermes_write_regn(hw
, EVACK
, 0xffff);
1709 priv
->hw_unavailable
++;
1710 priv
->last_linkstatus
= 0xffff; /* firmware will have to reassociate */
1711 netif_carrier_off(dev
);
1713 orinoco_unlock(priv
, &flags
);
1715 /* Scanning support: Notify scan cancellation */
1716 if (priv
->scan_request
) {
1717 cfg80211_scan_done(priv
->scan_request
, 1);
1718 priv
->scan_request
= NULL
;
1721 if (priv
->hard_reset
) {
1722 err
= (*priv
->hard_reset
)(priv
);
1724 printk(KERN_ERR
"%s: orinoco_reset: Error %d "
1725 "performing hard reset\n", dev
->name
, err
);
1730 err
= orinoco_reinit_firmware(priv
);
1732 printk(KERN_ERR
"%s: orinoco_reset: Error %d re-initializing firmware\n",
1737 /* This has to be called from user context */
1738 spin_lock_irq(&priv
->lock
);
1740 priv
->hw_unavailable
--;
1742 /* priv->open or priv->hw_unavailable might have changed while
1743 * we dropped the lock */
1744 if (priv
->open
&& (!priv
->hw_unavailable
)) {
1745 err
= __orinoco_up(priv
);
1747 printk(KERN_ERR
"%s: orinoco_reset: Error %d reenabling card\n",
1750 dev
->trans_start
= jiffies
;
1753 spin_unlock_irq(&priv
->lock
);
1757 hermes_set_irqmask(hw
, 0);
1758 netif_device_detach(dev
);
1759 printk(KERN_ERR
"%s: Device has been disabled!\n", dev
->name
);
1762 static int __orinoco_commit(struct orinoco_private
*priv
)
1764 struct net_device
*dev
= priv
->ndev
;
1767 err
= orinoco_hw_program_rids(priv
);
1769 /* FIXME: what about netif_tx_lock */
1770 (void) __orinoco_set_multicast_list(dev
);
1775 /* Ensures configuration changes are applied. May result in a reset.
1776 * The caller should hold priv->lock
1778 int orinoco_commit(struct orinoco_private
*priv
)
1780 struct net_device
*dev
= priv
->ndev
;
1781 hermes_t
*hw
= &priv
->hw
;
1784 if (priv
->broken_disableport
) {
1785 schedule_work(&priv
->reset_work
);
1789 err
= hermes_disable_port(hw
, 0);
1791 printk(KERN_WARNING
"%s: Unable to disable port "
1792 "while reconfiguring card\n", dev
->name
);
1793 priv
->broken_disableport
= 1;
1797 err
= __orinoco_commit(priv
);
1799 printk(KERN_WARNING
"%s: Unable to reconfigure card\n",
1804 err
= hermes_enable_port(hw
, 0);
1806 printk(KERN_WARNING
"%s: Unable to enable port while reconfiguring card\n",
1813 printk(KERN_WARNING
"%s: Resetting instead...\n", dev
->name
);
1814 schedule_work(&priv
->reset_work
);
1820 /********************************************************************/
1821 /* Interrupt handler */
1822 /********************************************************************/
1824 static void __orinoco_ev_tick(struct net_device
*dev
, hermes_t
*hw
)
1826 printk(KERN_DEBUG
"%s: TICK\n", dev
->name
);
1829 static void __orinoco_ev_wterr(struct net_device
*dev
, hermes_t
*hw
)
1831 /* This seems to happen a fair bit under load, but ignoring it
1832 seems to work fine...*/
1833 printk(KERN_DEBUG
"%s: MAC controller error (WTERR). Ignoring.\n",
1837 irqreturn_t
orinoco_interrupt(int irq
, void *dev_id
)
1839 struct orinoco_private
*priv
= dev_id
;
1840 struct net_device
*dev
= priv
->ndev
;
1841 hermes_t
*hw
= &priv
->hw
;
1842 int count
= MAX_IRQLOOPS_PER_IRQ
;
1844 /* These are used to detect a runaway interrupt situation.
1846 * If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
1847 * we panic and shut down the hardware
1849 /* jiffies value the last time we were called */
1850 static int last_irq_jiffy
; /* = 0 */
1851 static int loops_this_jiffy
; /* = 0 */
1852 unsigned long flags
;
1854 if (orinoco_lock(priv
, &flags
) != 0) {
1855 /* If hw is unavailable - we don't know if the irq was
1860 evstat
= hermes_read_regn(hw
, EVSTAT
);
1861 events
= evstat
& hw
->inten
;
1863 orinoco_unlock(priv
, &flags
);
1867 if (jiffies
!= last_irq_jiffy
)
1868 loops_this_jiffy
= 0;
1869 last_irq_jiffy
= jiffies
;
1871 while (events
&& count
--) {
1872 if (++loops_this_jiffy
> MAX_IRQLOOPS_PER_JIFFY
) {
1873 printk(KERN_WARNING
"%s: IRQ handler is looping too "
1874 "much! Resetting.\n", dev
->name
);
1875 /* Disable interrupts for now */
1876 hermes_set_irqmask(hw
, 0);
1877 schedule_work(&priv
->reset_work
);
1881 /* Check the card hasn't been removed */
1882 if (!hermes_present(hw
)) {
1883 DEBUG(0, "orinoco_interrupt(): card removed\n");
1887 if (events
& HERMES_EV_TICK
)
1888 __orinoco_ev_tick(dev
, hw
);
1889 if (events
& HERMES_EV_WTERR
)
1890 __orinoco_ev_wterr(dev
, hw
);
1891 if (events
& HERMES_EV_INFDROP
)
1892 __orinoco_ev_infdrop(dev
, hw
);
1893 if (events
& HERMES_EV_INFO
)
1894 __orinoco_ev_info(dev
, hw
);
1895 if (events
& HERMES_EV_RX
)
1896 __orinoco_ev_rx(dev
, hw
);
1897 if (events
& HERMES_EV_TXEXC
)
1898 __orinoco_ev_txexc(dev
, hw
);
1899 if (events
& HERMES_EV_TX
)
1900 __orinoco_ev_tx(dev
, hw
);
1901 if (events
& HERMES_EV_ALLOC
)
1902 __orinoco_ev_alloc(dev
, hw
);
1904 hermes_write_regn(hw
, EVACK
, evstat
);
1906 evstat
= hermes_read_regn(hw
, EVSTAT
);
1907 events
= evstat
& hw
->inten
;
1910 orinoco_unlock(priv
, &flags
);
1913 EXPORT_SYMBOL(orinoco_interrupt
);
1915 /********************************************************************/
1916 /* Power management */
1917 /********************************************************************/
1918 #if defined(CONFIG_PM_SLEEP) && !defined(CONFIG_HERMES_CACHE_FW_ON_INIT)
1919 static int orinoco_pm_notifier(struct notifier_block
*notifier
,
1920 unsigned long pm_event
,
1923 struct orinoco_private
*priv
= container_of(notifier
,
1924 struct orinoco_private
,
1927 /* All we need to do is cache the firmware before suspend, and
1928 * release it when we come out.
1930 * Only need to do this if we're downloading firmware. */
1931 if (!priv
->do_fw_download
)
1935 case PM_HIBERNATION_PREPARE
:
1936 case PM_SUSPEND_PREPARE
:
1937 orinoco_cache_fw(priv
, 0);
1940 case PM_POST_RESTORE
:
1941 /* Restore from hibernation failed. We need to clean
1942 * up in exactly the same way, so fall through. */
1943 case PM_POST_HIBERNATION
:
1944 case PM_POST_SUSPEND
:
1945 orinoco_uncache_fw(priv
);
1948 case PM_RESTORE_PREPARE
:
1956 static void orinoco_register_pm_notifier(struct orinoco_private
*priv
)
1958 priv
->pm_notifier
.notifier_call
= orinoco_pm_notifier
;
1959 register_pm_notifier(&priv
->pm_notifier
);
1962 static void orinoco_unregister_pm_notifier(struct orinoco_private
*priv
)
1964 unregister_pm_notifier(&priv
->pm_notifier
);
1966 #else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */
1967 #define orinoco_register_pm_notifier(priv) do { } while(0)
1968 #define orinoco_unregister_pm_notifier(priv) do { } while(0)
1971 /********************************************************************/
1972 /* Initialization */
1973 /********************************************************************/
1975 int orinoco_init(struct orinoco_private
*priv
)
1977 struct device
*dev
= priv
->dev
;
1978 struct wiphy
*wiphy
= priv_to_wiphy(priv
);
1979 hermes_t
*hw
= &priv
->hw
;
1982 /* No need to lock, the hw_unavailable flag is already set in
1983 * alloc_orinocodev() */
1984 priv
->nicbuf_size
= IEEE80211_MAX_FRAME_LEN
+ ETH_HLEN
;
1986 /* Initialize the firmware */
1987 err
= hermes_init(hw
);
1989 dev_err(dev
, "Failed to initialize firmware (err = %d)\n",
1994 err
= determine_fw_capabilities(priv
, wiphy
->fw_version
,
1995 sizeof(wiphy
->fw_version
),
1996 &wiphy
->hw_version
);
1998 dev_err(dev
, "Incompatible firmware, aborting\n");
2002 if (priv
->do_fw_download
) {
2003 #ifdef CONFIG_HERMES_CACHE_FW_ON_INIT
2004 orinoco_cache_fw(priv
, 0);
2007 err
= orinoco_download(priv
);
2009 priv
->do_fw_download
= 0;
2011 /* Check firmware version again */
2012 err
= determine_fw_capabilities(priv
, wiphy
->fw_version
,
2013 sizeof(wiphy
->fw_version
),
2014 &wiphy
->hw_version
);
2016 dev_err(dev
, "Incompatible firmware, aborting\n");
2021 if (priv
->has_port3
)
2022 dev_info(dev
, "Ad-hoc demo mode supported\n");
2024 dev_info(dev
, "IEEE standard IBSS ad-hoc mode supported\n");
2026 dev_info(dev
, "WEP supported, %s-bit key\n",
2027 priv
->has_big_wep
? "104" : "40");
2028 if (priv
->has_wpa
) {
2029 dev_info(dev
, "WPA-PSK supported\n");
2030 if (orinoco_mic_init(priv
)) {
2031 dev_err(dev
, "Failed to setup MIC crypto algorithm. "
2032 "Disabling WPA support\n");
2037 err
= orinoco_hw_read_card_settings(priv
, wiphy
->perm_addr
);
2041 err
= orinoco_hw_allocate_fid(priv
);
2043 dev_err(dev
, "Failed to allocate NIC buffer!\n");
2047 /* Set up the default configuration */
2048 priv
->iw_mode
= NL80211_IFTYPE_STATION
;
2049 /* By default use IEEE/IBSS ad-hoc mode if we have it */
2050 priv
->prefer_port3
= priv
->has_port3
&& (!priv
->has_ibss
);
2051 set_port_type(priv
);
2052 priv
->channel
= 0; /* use firmware default */
2054 priv
->promiscuous
= 0;
2055 priv
->encode_alg
= ORINOCO_ALG_NONE
;
2057 priv
->wpa_enabled
= 0;
2058 priv
->tkip_cm_active
= 0;
2060 priv
->wpa_ie_len
= 0;
2061 priv
->wpa_ie
= NULL
;
2063 if (orinoco_wiphy_register(wiphy
)) {
2068 /* Make the hardware available, as long as it hasn't been
2069 * removed elsewhere (e.g. by PCMCIA hot unplug) */
2070 spin_lock_irq(&priv
->lock
);
2071 priv
->hw_unavailable
--;
2072 spin_unlock_irq(&priv
->lock
);
2074 dev_dbg(dev
, "Ready\n");
2079 EXPORT_SYMBOL(orinoco_init
);
2081 static const struct net_device_ops orinoco_netdev_ops
= {
2082 .ndo_open
= orinoco_open
,
2083 .ndo_stop
= orinoco_stop
,
2084 .ndo_start_xmit
= orinoco_xmit
,
2085 .ndo_set_multicast_list
= orinoco_set_multicast_list
,
2086 .ndo_change_mtu
= orinoco_change_mtu
,
2087 .ndo_set_mac_address
= eth_mac_addr
,
2088 .ndo_validate_addr
= eth_validate_addr
,
2089 .ndo_tx_timeout
= orinoco_tx_timeout
,
2090 .ndo_get_stats
= orinoco_get_stats
,
2093 /* Allocate private data.
2095 * This driver has a number of structures associated with it
2096 * netdev - Net device structure for each network interface
2097 * wiphy - structure associated with wireless phy
2098 * wireless_dev (wdev) - structure for each wireless interface
2099 * hw - structure for hermes chip info
2100 * card - card specific structure for use by the card driver
2101 * (airport, orinoco_cs)
2102 * priv - orinoco private data
2103 * device - generic linux device structure
2105 * +---------+ +---------+
2106 * | wiphy | | netdev |
2107 * | +-------+ | +-------+
2108 * | | priv | | | wdev |
2109 * | | +-----+ +-+-------+
2115 * priv has a link to netdev and device
2116 * wdev has a link to wiphy
2118 struct orinoco_private
2119 *alloc_orinocodev(int sizeof_card
,
2120 struct device
*device
,
2121 int (*hard_reset
)(struct orinoco_private
*),
2122 int (*stop_fw
)(struct orinoco_private
*, int))
2124 struct orinoco_private
*priv
;
2125 struct wiphy
*wiphy
;
2128 * NOTE: We only support a single virtual interface
2129 * but this may change when monitor mode is added
2131 wiphy
= wiphy_new(&orinoco_cfg_ops
,
2132 sizeof(struct orinoco_private
) + sizeof_card
);
2136 priv
= wiphy_priv(wiphy
);
2140 priv
->card
= (void *)((unsigned long)priv
2141 + sizeof(struct orinoco_private
));
2145 orinoco_wiphy_init(wiphy
);
2148 priv
->wireless_data
.spy_data
= &priv
->spy_data
;
2151 /* Set up default callbacks */
2152 priv
->hard_reset
= hard_reset
;
2153 priv
->stop_fw
= stop_fw
;
2155 spin_lock_init(&priv
->lock
);
2157 priv
->hw_unavailable
= 1; /* orinoco_init() must clear this
2158 * before anything else touches the
2160 INIT_WORK(&priv
->reset_work
, orinoco_reset
);
2161 INIT_WORK(&priv
->join_work
, orinoco_join_ap
);
2162 INIT_WORK(&priv
->wevent_work
, orinoco_send_wevents
);
2164 INIT_LIST_HEAD(&priv
->rx_list
);
2165 tasklet_init(&priv
->rx_tasklet
, orinoco_rx_isr_tasklet
,
2166 (unsigned long) priv
);
2168 spin_lock_init(&priv
->scan_lock
);
2169 INIT_LIST_HEAD(&priv
->scan_list
);
2170 INIT_WORK(&priv
->process_scan
, orinoco_process_scan_results
);
2172 priv
->last_linkstatus
= 0xffff;
2174 #if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP)
2175 priv
->cached_pri_fw
= NULL
;
2176 priv
->cached_fw
= NULL
;
2179 /* Register PM notifiers */
2180 orinoco_register_pm_notifier(priv
);
2184 EXPORT_SYMBOL(alloc_orinocodev
);
2186 /* We can only support a single interface. We provide a separate
2187 * function to set it up to distinguish between hardware
2188 * initialisation and interface setup.
2190 * The base_addr and irq parameters are passed on to netdev for use
2193 int orinoco_if_add(struct orinoco_private
*priv
,
2194 unsigned long base_addr
,
2197 struct wiphy
*wiphy
= priv_to_wiphy(priv
);
2198 struct wireless_dev
*wdev
;
2199 struct net_device
*dev
;
2202 dev
= alloc_etherdev(sizeof(struct wireless_dev
));
2207 /* Initialise wireless_dev */
2208 wdev
= netdev_priv(dev
);
2209 wdev
->wiphy
= wiphy
;
2210 wdev
->iftype
= NL80211_IFTYPE_STATION
;
2212 /* Setup / override net_device fields */
2213 dev
->ieee80211_ptr
= wdev
;
2214 dev
->netdev_ops
= &orinoco_netdev_ops
;
2215 dev
->watchdog_timeo
= HZ
; /* 1 second timeout */
2216 dev
->wireless_handlers
= &orinoco_handler_def
;
2218 dev
->wireless_data
= &priv
->wireless_data
;
2220 /* we use the default eth_mac_addr for setting the MAC addr */
2222 /* Reserve space in skb for the SNAP header */
2223 dev
->hard_header_len
+= ENCAPS_OVERHEAD
;
2225 netif_carrier_off(dev
);
2227 memcpy(dev
->dev_addr
, wiphy
->perm_addr
, ETH_ALEN
);
2228 memcpy(dev
->perm_addr
, wiphy
->perm_addr
, ETH_ALEN
);
2230 dev
->base_addr
= base_addr
;
2233 SET_NETDEV_DEV(dev
, priv
->dev
);
2234 ret
= register_netdev(dev
);
2240 /* Report what we've done */
2241 dev_dbg(priv
->dev
, "Registerred interface %s.\n", dev
->name
);
2249 EXPORT_SYMBOL(orinoco_if_add
);
2251 void orinoco_if_del(struct orinoco_private
*priv
)
2253 struct net_device
*dev
= priv
->ndev
;
2255 unregister_netdev(dev
);
2258 EXPORT_SYMBOL(orinoco_if_del
);
2260 void free_orinocodev(struct orinoco_private
*priv
)
2262 struct wiphy
*wiphy
= priv_to_wiphy(priv
);
2263 struct orinoco_rx_data
*rx_data
, *temp
;
2264 struct orinoco_scan_data
*sd
, *sdtemp
;
2266 wiphy_unregister(wiphy
);
2268 /* If the tasklet is scheduled when we call tasklet_kill it
2269 * will run one final time. However the tasklet will only
2270 * drain priv->rx_list if the hw is still available. */
2271 tasklet_kill(&priv
->rx_tasklet
);
2273 /* Explicitly drain priv->rx_list */
2274 list_for_each_entry_safe(rx_data
, temp
, &priv
->rx_list
, list
) {
2275 list_del(&rx_data
->list
);
2277 dev_kfree_skb(rx_data
->skb
);
2278 kfree(rx_data
->desc
);
2282 cancel_work_sync(&priv
->process_scan
);
2283 /* Explicitly drain priv->scan_list */
2284 list_for_each_entry_safe(sd
, sdtemp
, &priv
->scan_list
, list
) {
2285 list_del(&sd
->list
);
2287 if ((sd
->len
> 0) && sd
->buf
)
2292 orinoco_unregister_pm_notifier(priv
);
2293 orinoco_uncache_fw(priv
);
2295 priv
->wpa_ie_len
= 0;
2296 kfree(priv
->wpa_ie
);
2297 orinoco_mic_free(priv
);
2300 EXPORT_SYMBOL(free_orinocodev
);
2302 int orinoco_up(struct orinoco_private
*priv
)
2304 struct net_device
*dev
= priv
->ndev
;
2305 unsigned long flags
;
2308 spin_lock_irqsave(&priv
->lock
, flags
);
2310 err
= orinoco_reinit_firmware(priv
);
2312 printk(KERN_ERR
"%s: Error %d re-initializing firmware\n",
2317 netif_device_attach(dev
);
2318 priv
->hw_unavailable
--;
2320 if (priv
->open
&& !priv
->hw_unavailable
) {
2321 err
= __orinoco_up(priv
);
2323 printk(KERN_ERR
"%s: Error %d restarting card\n",
2328 spin_unlock_irqrestore(&priv
->lock
, flags
);
2332 EXPORT_SYMBOL(orinoco_up
);
2334 void orinoco_down(struct orinoco_private
*priv
)
2336 struct net_device
*dev
= priv
->ndev
;
2337 unsigned long flags
;
2340 spin_lock_irqsave(&priv
->lock
, flags
);
2341 err
= __orinoco_down(priv
);
2343 printk(KERN_WARNING
"%s: Error %d downing interface\n",
2346 netif_device_detach(dev
);
2347 priv
->hw_unavailable
++;
2348 spin_unlock_irqrestore(&priv
->lock
, flags
);
2350 EXPORT_SYMBOL(orinoco_down
);
2352 /********************************************************************/
2353 /* Module initialization */
2354 /********************************************************************/
2356 /* Can't be declared "const" or the whole __initdata section will
2358 static char version
[] __initdata
= DRIVER_NAME
" " DRIVER_VERSION
2359 " (David Gibson <hermes@gibson.dropbear.id.au>, "
2360 "Pavel Roskin <proski@gnu.org>, et al)";
2362 static int __init
init_orinoco(void)
2364 printk(KERN_DEBUG
"%s\n", version
);
2368 static void __exit
exit_orinoco(void)
2372 module_init(init_orinoco
);
2373 module_exit(exit_orinoco
);