2 * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
4 * VGA text mode console part
6 * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria
8 * If distributed as part of the Linux kernel, this code is licensed under the
11 * Otherwise, the following license terms apply:
13 * * Redistribution and use in source and binary forms, with or without
14 * * modification, are permitted provided that the following conditions
16 * * 1) Redistributions of source code must retain the above copyright
17 * * notice, this list of conditions and the following disclaimer.
18 * * 2) Redistributions in binary form must reproduce the above copyright
19 * * notice, this list of conditions and the following disclaimer in the
20 * * documentation and/or other materials provided with the distribution.
21 * * 3) The name of the author may not be used to endorse or promote products
22 * * derived from this software without specific psisusbr written permission.
24 * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
25 * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
26 * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
27 * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
28 * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
29 * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
30 * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
31 * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
32 * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
33 * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 * Author: Thomas Winischhofer <thomas@winischhofer.net>
37 * Portions based on vgacon.c which are
38 * Created 28 Sep 1997 by Geert Uytterhoeven
39 * Rewritten by Martin Mares <mj@ucw.cz>, July 1998
40 * based on code Copyright (C) 1991, 1992 Linus Torvalds
43 * A note on using in_atomic() in here: We can't handle console
44 * calls from non-schedulable context due to our USB-dependend
45 * nature. For now, this driver just ignores any calls if it
50 #include <linux/mutex.h>
51 #include <linux/module.h>
52 #include <linux/kernel.h>
53 #include <linux/signal.h>
55 #include <linux/usb.h>
56 #include <linux/tty.h>
57 #include <linux/console.h>
58 #include <linux/string.h>
60 #include <linux/init.h>
61 #include <linux/vt_kern.h>
62 #include <linux/selection.h>
63 #include <linux/spinlock.h>
64 #include <linux/kref.h>
65 #include <linux/ioport.h>
66 #include <linux/interrupt.h>
67 #include <linux/vmalloc.h>
70 #include "sisusb_init.h"
72 #ifdef INCL_SISUSB_CON
74 #define sisusbcon_writew(val, addr) (*(addr) = (val))
75 #define sisusbcon_readw(addr) (*(addr))
76 #define sisusbcon_memmovew(d, s, c) memmove(d, s, c)
77 #define sisusbcon_memcpyw(d, s, c) memcpy(d, s, c)
79 /* vc_data -> sisusb conversion table */
80 static struct sisusb_usb_data
*mysisusbs
[MAX_NR_CONSOLES
];
82 /* Forward declaration */
83 static const struct consw sisusb_con
;
86 sisusbcon_memsetw(u16
*s
, u16 c
, unsigned int count
)
90 sisusbcon_writew(c
, s
++);
94 sisusb_initialize(struct sisusb_usb_data
*sisusb
)
96 /* Reset cursor and start address */
97 if (sisusb_setidxreg(sisusb
, SISCR
, 0x0c, 0x00))
99 if (sisusb_setidxreg(sisusb
, SISCR
, 0x0d, 0x00))
101 if (sisusb_setidxreg(sisusb
, SISCR
, 0x0e, 0x00))
103 sisusb_setidxreg(sisusb
, SISCR
, 0x0f, 0x00);
107 sisusbcon_set_start_address(struct sisusb_usb_data
*sisusb
, struct vc_data
*c
)
109 sisusb
->cur_start_addr
= (c
->vc_visible_origin
- sisusb
->scrbuf
) / 2;
111 sisusb_setidxreg(sisusb
, SISCR
, 0x0c, (sisusb
->cur_start_addr
>> 8));
112 sisusb_setidxreg(sisusb
, SISCR
, 0x0d, (sisusb
->cur_start_addr
& 0xff));
116 sisusb_set_cursor(struct sisusb_usb_data
*sisusb
, unsigned int location
)
118 if (sisusb
->sisusb_cursor_loc
== location
)
121 sisusb
->sisusb_cursor_loc
= location
;
123 /* Hardware bug: Text cursor appears twice or not at all
124 * at some positions. Work around it with the cursor skew
128 if ((location
& 0x0007) == 0x0007) {
129 sisusb
->bad_cursor_pos
= 1;
131 if (sisusb_setidxregandor(sisusb
, SISCR
, 0x0b, 0x1f, 0x20))
133 } else if (sisusb
->bad_cursor_pos
) {
134 if (sisusb_setidxregand(sisusb
, SISCR
, 0x0b, 0x1f))
136 sisusb
->bad_cursor_pos
= 0;
139 if (sisusb_setidxreg(sisusb
, SISCR
, 0x0e, (location
>> 8)))
141 sisusb_setidxreg(sisusb
, SISCR
, 0x0f, (location
& 0xff));
144 static inline struct sisusb_usb_data
*
145 sisusb_get_sisusb(unsigned short console
)
147 return mysisusbs
[console
];
151 sisusb_sisusb_valid(struct sisusb_usb_data
*sisusb
)
153 if (!sisusb
->present
|| !sisusb
->ready
|| !sisusb
->sisusb_dev
)
159 static struct sisusb_usb_data
*
160 sisusb_get_sisusb_lock_and_check(unsigned short console
)
162 struct sisusb_usb_data
*sisusb
;
164 /* We can't handle console calls in non-schedulable
165 * context due to our locks and the USB transport.
166 * So we simply ignore them. This should only affect
167 * some calls to printk.
172 if (!(sisusb
= sisusb_get_sisusb(console
)))
175 mutex_lock(&sisusb
->lock
);
177 if (!sisusb_sisusb_valid(sisusb
) ||
178 !sisusb
->havethisconsole
[console
]) {
179 mutex_unlock(&sisusb
->lock
);
187 sisusb_is_inactive(struct vc_data
*c
, struct sisusb_usb_data
*sisusb
)
189 if (sisusb
->is_gfx
||
190 sisusb
->textmodedestroyed
||
191 c
->vc_mode
!= KD_TEXT
)
197 /* con_startup console interface routine */
199 sisusbcon_startup(void)
204 /* con_init console interface routine */
206 sisusbcon_init(struct vc_data
*c
, int init
)
208 struct sisusb_usb_data
*sisusb
;
211 /* This is called by take_over_console(),
212 * ie by us/under our control. It is
213 * only called after text mode and fonts
214 * are set up/restored.
217 if (!(sisusb
= sisusb_get_sisusb(c
->vc_num
)))
220 mutex_lock(&sisusb
->lock
);
222 if (!sisusb_sisusb_valid(sisusb
)) {
223 mutex_unlock(&sisusb
->lock
);
227 c
->vc_can_do_color
= 1;
229 c
->vc_complement_mask
= 0x7700;
231 c
->vc_hi_font_mask
= sisusb
->current_font_512
? 0x0800 : 0;
233 sisusb
->haveconsole
= 1;
235 sisusb
->havethisconsole
[c
->vc_num
] = 1;
237 /* We only support 640x400 */
238 c
->vc_scan_lines
= 400;
240 c
->vc_font
.height
= sisusb
->current_font_height
;
242 /* We only support width = 8 */
244 rows
= c
->vc_scan_lines
/ c
->vc_font
.height
;
246 /* Increment usage count for our sisusb.
247 * Doing so saves us from upping/downing
248 * the disconnect semaphore; we can't
249 * lose our sisusb until this is undone
250 * in con_deinit. For all other console
251 * interface functions, it suffices to
252 * use sisusb->lock and do a quick check
253 * of sisusb for device disconnection.
255 kref_get(&sisusb
->kref
);
257 if (!*c
->vc_uni_pagedir_loc
)
258 con_set_default_unimap(c
);
260 mutex_unlock(&sisusb
->lock
);
266 vc_resize(c
, cols
, rows
);
269 /* con_deinit console interface routine */
271 sisusbcon_deinit(struct vc_data
*c
)
273 struct sisusb_usb_data
*sisusb
;
276 /* This is called by take_over_console()
277 * and others, ie not under our control.
280 if (!(sisusb
= sisusb_get_sisusb(c
->vc_num
)))
283 mutex_lock(&sisusb
->lock
);
285 /* Clear ourselves in mysisusbs */
286 mysisusbs
[c
->vc_num
] = NULL
;
288 sisusb
->havethisconsole
[c
->vc_num
] = 0;
290 /* Free our font buffer if all consoles are gone */
291 if (sisusb
->font_backup
) {
292 for(i
= 0; i
< MAX_NR_CONSOLES
; i
++) {
293 if (sisusb
->havethisconsole
[c
->vc_num
])
296 if (i
== MAX_NR_CONSOLES
) {
297 vfree(sisusb
->font_backup
);
298 sisusb
->font_backup
= NULL
;
302 mutex_unlock(&sisusb
->lock
);
304 /* decrement the usage count on our sisusb */
305 kref_put(&sisusb
->kref
, sisusb_delete
);
308 /* interface routine */
310 sisusbcon_build_attr(struct vc_data
*c
, u8 color
, u8 intensity
,
311 u8 blink
, u8 underline
, u8 reverse
, u8 unused
)
316 attr
= (attr
& 0xf0) | c
->vc_ulcolor
;
317 else if (intensity
== 0)
318 attr
= (attr
& 0xf0) | c
->vc_halfcolor
;
321 attr
= ((attr
) & 0x88) |
323 ((attr
) << 4)) & 0x77);
334 /* Interface routine */
336 sisusbcon_invert_region(struct vc_data
*vc
, u16
*p
, int count
)
338 /* Invert a region. This is called with a pointer
339 * to the console's internal screen buffer. So we
340 * simply do the inversion there and rely on
341 * a call to putc(s) to update the real screen.
345 u16 a
= sisusbcon_readw(p
);
348 (((a
) & 0x7000) >> 4) |
349 (((a
) & 0x0700) << 4);
351 sisusbcon_writew(a
, p
++);
355 #define SISUSB_VADDR(x,y) \
356 ((u16 *)c->vc_origin + \
357 (y) * sisusb->sisusb_num_columns + \
360 #define SISUSB_HADDR(x,y) \
361 ((u16 *)(sisusb->vrambase + (c->vc_origin - sisusb->scrbuf)) + \
362 (y) * sisusb->sisusb_num_columns + \
365 /* Interface routine */
367 sisusbcon_putc(struct vc_data
*c
, int ch
, int y
, int x
)
369 struct sisusb_usb_data
*sisusb
;
372 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
375 /* sisusb->lock is down */
376 if (sisusb_is_inactive(c
, sisusb
)) {
377 mutex_unlock(&sisusb
->lock
);
382 sisusb_copy_memory(sisusb
, (char *)SISUSB_VADDR(x
, y
),
383 (long)SISUSB_HADDR(x
, y
), 2, &written
);
385 mutex_unlock(&sisusb
->lock
);
388 /* Interface routine */
390 sisusbcon_putcs(struct vc_data
*c
, const unsigned short *s
,
391 int count
, int y
, int x
)
393 struct sisusb_usb_data
*sisusb
;
398 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
401 /* sisusb->lock is down */
403 /* Need to put the characters into the buffer ourselves,
404 * because the vt does this AFTER calling us.
407 dest
= SISUSB_VADDR(x
, y
);
409 for (i
= count
; i
> 0; i
--)
410 sisusbcon_writew(sisusbcon_readw(s
++), dest
++);
412 if (sisusb_is_inactive(c
, sisusb
)) {
413 mutex_unlock(&sisusb
->lock
);
417 sisusb_copy_memory(sisusb
, (char *)SISUSB_VADDR(x
, y
),
418 (long)SISUSB_HADDR(x
, y
), count
* 2, &written
);
420 mutex_unlock(&sisusb
->lock
);
423 /* Interface routine */
425 sisusbcon_clear(struct vc_data
*c
, int y
, int x
, int height
, int width
)
427 struct sisusb_usb_data
*sisusb
;
428 u16 eattr
= c
->vc_video_erase_char
;
433 if (width
<= 0 || height
<= 0)
436 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
439 /* sisusb->lock is down */
441 /* Need to clear buffer ourselves, because the vt does
442 * this AFTER calling us.
445 dest
= SISUSB_VADDR(x
, y
);
447 cols
= sisusb
->sisusb_num_columns
;
452 if (x
== 0 && width
>= c
->vc_cols
) {
454 sisusbcon_memsetw(dest
, eattr
, height
* cols
* 2);
458 for (i
= height
; i
> 0; i
--, dest
+= cols
)
459 sisusbcon_memsetw(dest
, eattr
, width
* 2);
463 if (sisusb_is_inactive(c
, sisusb
)) {
464 mutex_unlock(&sisusb
->lock
);
468 length
= ((height
* cols
) - x
- (cols
- width
- x
)) * 2;
471 sisusb_copy_memory(sisusb
, (unsigned char *)SISUSB_VADDR(x
, y
),
472 (long)SISUSB_HADDR(x
, y
), length
, &written
);
474 mutex_unlock(&sisusb
->lock
);
477 /* Interface routine */
479 sisusbcon_bmove(struct vc_data
*c
, int sy
, int sx
,
480 int dy
, int dx
, int height
, int width
)
482 struct sisusb_usb_data
*sisusb
;
486 if (width
<= 0 || height
<= 0)
489 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
492 /* sisusb->lock is down */
494 cols
= sisusb
->sisusb_num_columns
;
496 if (sisusb_is_inactive(c
, sisusb
)) {
497 mutex_unlock(&sisusb
->lock
);
501 length
= ((height
* cols
) - dx
- (cols
- width
- dx
)) * 2;
504 sisusb_copy_memory(sisusb
, (unsigned char *)SISUSB_VADDR(dx
, dy
),
505 (long)SISUSB_HADDR(dx
, dy
), length
, &written
);
507 mutex_unlock(&sisusb
->lock
);
510 /* interface routine */
512 sisusbcon_switch(struct vc_data
*c
)
514 struct sisusb_usb_data
*sisusb
;
518 /* Returnvalue 0 means we have fully restored screen,
519 * and vt doesn't need to call do_update_region().
520 * Returnvalue != 0 naturally means the opposite.
523 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
526 /* sisusb->lock is down */
528 /* Don't write to screen if in gfx mode */
529 if (sisusb_is_inactive(c
, sisusb
)) {
530 mutex_unlock(&sisusb
->lock
);
534 /* That really should not happen. It would mean we are
535 * being called while the vc is using its private buffer
538 if (c
->vc_origin
== (unsigned long)c
->vc_screenbuf
) {
539 mutex_unlock(&sisusb
->lock
);
540 dev_dbg(&sisusb
->sisusb_dev
->dev
, "ASSERT ORIGIN != SCREENBUF!\n");
544 /* Check that we don't copy too much */
545 length
= min((int)c
->vc_screenbuf_size
,
546 (int)(sisusb
->scrbuf
+ sisusb
->scrbuf_size
- c
->vc_origin
));
548 /* Restore the screen contents */
549 sisusbcon_memcpyw((u16
*)c
->vc_origin
, (u16
*)c
->vc_screenbuf
,
552 sisusb_copy_memory(sisusb
, (unsigned char *)c
->vc_origin
,
553 (long)SISUSB_HADDR(0, 0),
556 mutex_unlock(&sisusb
->lock
);
561 /* interface routine */
563 sisusbcon_save_screen(struct vc_data
*c
)
565 struct sisusb_usb_data
*sisusb
;
568 /* Save the current screen contents to vc's private
572 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
575 /* sisusb->lock is down */
577 if (sisusb_is_inactive(c
, sisusb
)) {
578 mutex_unlock(&sisusb
->lock
);
582 /* Check that we don't copy too much */
583 length
= min((int)c
->vc_screenbuf_size
,
584 (int)(sisusb
->scrbuf
+ sisusb
->scrbuf_size
- c
->vc_origin
));
586 /* Save the screen contents to vc's private buffer */
587 sisusbcon_memcpyw((u16
*)c
->vc_screenbuf
, (u16
*)c
->vc_origin
,
590 mutex_unlock(&sisusb
->lock
);
593 /* interface routine */
595 sisusbcon_set_palette(struct vc_data
*c
, unsigned char *table
)
597 struct sisusb_usb_data
*sisusb
;
600 /* Return value not used by vt */
602 if (!CON_IS_VISIBLE(c
))
605 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
608 /* sisusb->lock is down */
610 if (sisusb_is_inactive(c
, sisusb
)) {
611 mutex_unlock(&sisusb
->lock
);
615 for (i
= j
= 0; i
< 16; i
++) {
616 if (sisusb_setreg(sisusb
, SISCOLIDX
, table
[i
]))
618 if (sisusb_setreg(sisusb
, SISCOLDATA
, c
->vc_palette
[j
++] >> 2))
620 if (sisusb_setreg(sisusb
, SISCOLDATA
, c
->vc_palette
[j
++] >> 2))
622 if (sisusb_setreg(sisusb
, SISCOLDATA
, c
->vc_palette
[j
++] >> 2))
626 mutex_unlock(&sisusb
->lock
);
631 /* interface routine */
633 sisusbcon_blank(struct vc_data
*c
, int blank
, int mode_switch
)
635 struct sisusb_usb_data
*sisusb
;
636 u8 sr1
, cr17
, pmreg
, cr63
;
640 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
643 /* sisusb->lock is down */
646 sisusb
->is_gfx
= blank
? 1 : 0;
648 if (sisusb_is_inactive(c
, sisusb
)) {
649 mutex_unlock(&sisusb
->lock
);
655 case 1: /* Normal blanking: Clear screen */
657 sisusbcon_memsetw((u16
*)c
->vc_origin
,
658 c
->vc_video_erase_char
,
659 c
->vc_screenbuf_size
);
660 sisusb_copy_memory(sisusb
,
661 (unsigned char *)c
->vc_origin
,
662 (u32
)(sisusb
->vrambase
+
663 (c
->vc_origin
- sisusb
->scrbuf
)),
664 c
->vc_screenbuf_size
, &written
);
665 sisusb
->con_blanked
= 1;
669 default: /* VESA blanking */
671 case 0: /* Unblank */
677 sisusb
->con_blanked
= 0;
679 case VESA_VSYNC_SUSPEND
+ 1:
685 case VESA_HSYNC_SUSPEND
+ 1:
691 case VESA_POWERDOWN
+ 1:
698 mutex_unlock(&sisusb
->lock
);
702 sisusb_setidxregandor(sisusb
, SISSR
, 0x01, ~0x20, sr1
);
703 sisusb_setidxregandor(sisusb
, SISCR
, 0x17, 0x7f, cr17
);
704 sisusb_setidxregandor(sisusb
, SISSR
, 0x1f, 0x3f, pmreg
);
705 sisusb_setidxregandor(sisusb
, SISCR
, 0x63, 0xbf, cr63
);
709 mutex_unlock(&sisusb
->lock
);
714 /* interface routine */
716 sisusbcon_scrolldelta(struct vc_data
*c
, int lines
)
718 struct sisusb_usb_data
*sisusb
;
719 int margin
= c
->vc_size_row
* 4;
722 /* The return value does not seem to be used */
724 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
727 /* sisusb->lock is down */
729 if (sisusb_is_inactive(c
, sisusb
)) {
730 mutex_unlock(&sisusb
->lock
);
734 if (!lines
) /* Turn scrollback off */
735 c
->vc_visible_origin
= c
->vc_origin
;
738 if (sisusb
->con_rolled_over
>
739 (c
->vc_scr_end
- sisusb
->scrbuf
) + margin
) {
741 ul
= c
->vc_scr_end
- sisusb
->scrbuf
;
742 we
= sisusb
->con_rolled_over
+ c
->vc_size_row
;
747 we
= sisusb
->scrbuf_size
;
751 p
= (c
->vc_visible_origin
- sisusb
->scrbuf
- ul
+ we
) % we
+
752 lines
* c
->vc_size_row
;
754 st
= (c
->vc_origin
- sisusb
->scrbuf
- ul
+ we
) % we
;
765 c
->vc_visible_origin
= sisusb
->scrbuf
+ (p
+ ul
) % we
;
768 sisusbcon_set_start_address(sisusb
, c
);
770 mutex_unlock(&sisusb
->lock
);
775 /* Interface routine */
777 sisusbcon_cursor(struct vc_data
*c
, int mode
)
779 struct sisusb_usb_data
*sisusb
;
780 int from
, to
, baseline
;
782 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
785 /* sisusb->lock is down */
787 if (sisusb_is_inactive(c
, sisusb
)) {
788 mutex_unlock(&sisusb
->lock
);
792 if (c
->vc_origin
!= c
->vc_visible_origin
) {
793 c
->vc_visible_origin
= c
->vc_origin
;
794 sisusbcon_set_start_address(sisusb
, c
);
797 if (mode
== CM_ERASE
) {
798 sisusb_setidxregor(sisusb
, SISCR
, 0x0a, 0x20);
799 sisusb
->sisusb_cursor_size_to
= -1;
800 mutex_unlock(&sisusb
->lock
);
804 sisusb_set_cursor(sisusb
, (c
->vc_pos
- sisusb
->scrbuf
) / 2);
806 baseline
= c
->vc_font
.height
- (c
->vc_font
.height
< 10 ? 1 : 2);
808 switch (c
->vc_cursor_type
& 0x0f) {
809 case CUR_BLOCK
: from
= 1;
810 to
= c
->vc_font
.height
;
812 case CUR_TWO_THIRDS
: from
= c
->vc_font
.height
/ 3;
815 case CUR_LOWER_HALF
: from
= c
->vc_font
.height
/ 2;
818 case CUR_LOWER_THIRD
: from
= (c
->vc_font
.height
* 2) / 3;
821 case CUR_NONE
: from
= 31;
825 case CUR_UNDERLINE
: from
= baseline
- 1;
830 if (sisusb
->sisusb_cursor_size_from
!= from
||
831 sisusb
->sisusb_cursor_size_to
!= to
) {
833 sisusb_setidxreg(sisusb
, SISCR
, 0x0a, from
);
834 sisusb_setidxregandor(sisusb
, SISCR
, 0x0b, 0xe0, to
);
836 sisusb
->sisusb_cursor_size_from
= from
;
837 sisusb
->sisusb_cursor_size_to
= to
;
840 mutex_unlock(&sisusb
->lock
);
844 sisusbcon_scroll_area(struct vc_data
*c
, struct sisusb_usb_data
*sisusb
,
845 int t
, int b
, int dir
, int lines
)
847 int cols
= sisusb
->sisusb_num_columns
;
848 int length
= ((b
- t
) * cols
) * 2;
849 u16 eattr
= c
->vc_video_erase_char
;
852 /* sisusb->lock is down */
854 /* Scroll an area which does not match the
855 * visible screen's dimensions. This needs
856 * to be done separately, as it does not
857 * use hardware panning.
863 sisusbcon_memmovew(SISUSB_VADDR(0, t
),
864 SISUSB_VADDR(0, t
+ lines
),
865 (b
- t
- lines
) * cols
* 2);
866 sisusbcon_memsetw(SISUSB_VADDR(0, b
- lines
), eattr
,
871 sisusbcon_memmovew(SISUSB_VADDR(0, t
+ lines
),
873 (b
- t
- lines
) * cols
* 2);
874 sisusbcon_memsetw(SISUSB_VADDR(0, t
), eattr
,
879 sisusb_copy_memory(sisusb
, (char *)SISUSB_VADDR(0, t
),
880 (long)SISUSB_HADDR(0, t
), length
, &written
);
882 mutex_unlock(&sisusb
->lock
);
887 /* Interface routine */
889 sisusbcon_scroll(struct vc_data
*c
, int t
, int b
, int dir
, int lines
)
891 struct sisusb_usb_data
*sisusb
;
892 u16 eattr
= c
->vc_video_erase_char
;
895 unsigned long oldorigin
;
896 unsigned int delta
= lines
* c
->vc_size_row
;
899 /* Returning != 0 means we have done the scrolling successfully.
900 * Returning 0 makes vt do the scrolling on its own.
901 * Note that con_scroll is only called if the console is
902 * visible. In that case, the origin should be our buffer,
903 * not the vt's private one.
909 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
912 /* sisusb->lock is down */
914 if (sisusb_is_inactive(c
, sisusb
)) {
915 mutex_unlock(&sisusb
->lock
);
920 if (t
|| b
!= c
->vc_rows
)
921 return sisusbcon_scroll_area(c
, sisusb
, t
, b
, dir
, lines
);
923 if (c
->vc_origin
!= c
->vc_visible_origin
) {
924 c
->vc_visible_origin
= c
->vc_origin
;
925 sisusbcon_set_start_address(sisusb
, c
);
928 /* limit amount to maximum realistic size */
929 if (lines
> c
->vc_rows
)
932 oldorigin
= c
->vc_origin
;
938 if (c
->vc_scr_end
+ delta
>=
939 sisusb
->scrbuf
+ sisusb
->scrbuf_size
) {
940 sisusbcon_memcpyw((u16
*)sisusb
->scrbuf
,
941 (u16
*)(oldorigin
+ delta
),
942 c
->vc_screenbuf_size
- delta
);
943 c
->vc_origin
= sisusb
->scrbuf
;
944 sisusb
->con_rolled_over
= oldorigin
- sisusb
->scrbuf
;
947 c
->vc_origin
+= delta
;
950 (u16
*)(c
->vc_origin
+ c
->vc_screenbuf_size
- delta
),
957 if (oldorigin
- delta
< sisusb
->scrbuf
) {
958 sisusbcon_memmovew((u16
*)(sisusb
->scrbuf
+
959 sisusb
->scrbuf_size
-
960 c
->vc_screenbuf_size
+
963 c
->vc_screenbuf_size
- delta
);
964 c
->vc_origin
= sisusb
->scrbuf
+
965 sisusb
->scrbuf_size
-
966 c
->vc_screenbuf_size
;
967 sisusb
->con_rolled_over
= 0;
970 c
->vc_origin
-= delta
;
972 c
->vc_scr_end
= c
->vc_origin
+ c
->vc_screenbuf_size
;
974 scr_memsetw((u16
*)(c
->vc_origin
), eattr
, delta
);
979 originoffset
= (u32
)(c
->vc_origin
- sisusb
->scrbuf
);
982 sisusb_copy_memory(sisusb
,
983 (char *)c
->vc_origin
,
984 (u32
)(sisusb
->vrambase
+ originoffset
),
985 c
->vc_screenbuf_size
, &written
);
986 else if (dir
== SM_UP
)
987 sisusb_copy_memory(sisusb
,
988 (char *)c
->vc_origin
+ c
->vc_screenbuf_size
- delta
,
989 (u32
)sisusb
->vrambase
+ originoffset
+
990 c
->vc_screenbuf_size
- delta
,
993 sisusb_copy_memory(sisusb
,
994 (char *)c
->vc_origin
,
995 (u32
)(sisusb
->vrambase
+ originoffset
),
998 c
->vc_scr_end
= c
->vc_origin
+ c
->vc_screenbuf_size
;
999 c
->vc_visible_origin
= c
->vc_origin
;
1001 sisusbcon_set_start_address(sisusb
, c
);
1003 c
->vc_pos
= c
->vc_pos
- oldorigin
+ c
->vc_origin
;
1005 mutex_unlock(&sisusb
->lock
);
1010 /* Interface routine */
1012 sisusbcon_set_origin(struct vc_data
*c
)
1014 struct sisusb_usb_data
*sisusb
;
1016 /* Returning != 0 means we were successful.
1017 * Returning 0 will vt make to use its own
1018 * screenbuffer as the origin.
1021 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
1024 /* sisusb->lock is down */
1026 if (sisusb_is_inactive(c
, sisusb
) || sisusb
->con_blanked
) {
1027 mutex_unlock(&sisusb
->lock
);
1031 c
->vc_origin
= c
->vc_visible_origin
= sisusb
->scrbuf
;
1033 sisusbcon_set_start_address(sisusb
, c
);
1035 sisusb
->con_rolled_over
= 0;
1037 mutex_unlock(&sisusb
->lock
);
1042 /* Interface routine */
1044 sisusbcon_resize(struct vc_data
*c
, unsigned int newcols
, unsigned int newrows
,
1047 struct sisusb_usb_data
*sisusb
;
1050 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
1053 fh
= sisusb
->current_font_height
;
1055 mutex_unlock(&sisusb
->lock
);
1057 /* We are quite unflexible as regards resizing. The vt code
1058 * handles sizes where the line length isn't equal the pitch
1059 * quite badly. As regards the rows, our panning tricks only
1060 * work well if the number of rows equals the visible number
1064 if (newcols
!= 80 || c
->vc_scan_lines
/ fh
!= newrows
)
1071 sisusbcon_do_font_op(struct sisusb_usb_data
*sisusb
, int set
, int slot
,
1072 u8
*arg
, int cmapsz
, int ch512
, int dorecalc
,
1073 struct vc_data
*c
, int fh
, int uplock
)
1075 int font_select
= 0x00, i
, err
= 0;
1079 /* sisusb->lock is down */
1082 * The default font is kept in slot 0.
1083 * A user font is loaded in slot 2 (256 ch)
1087 if ((slot
!= 0 && slot
!= 2) || !fh
) {
1089 mutex_unlock(&sisusb
->lock
);
1094 sisusb
->font_slot
= slot
;
1096 /* Default font is always 256 */
1100 offset
= 4 * cmapsz
;
1102 font_select
= (slot
== 0) ? 0x00 : (ch512
? 0x0e : 0x0a);
1104 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x00, 0x01); /* Reset */
1105 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x02, 0x04); /* Write to plane 2 */
1106 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x04, 0x07); /* Memory mode a0-bf */
1107 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x00, 0x03); /* Reset */
1112 err
|= sisusb_setidxreg(sisusb
, SISGR
, 0x04, 0x03); /* Select plane read 2 */
1113 err
|= sisusb_setidxreg(sisusb
, SISGR
, 0x05, 0x00); /* Disable odd/even */
1114 err
|= sisusb_setidxreg(sisusb
, SISGR
, 0x06, 0x00); /* Address range a0-bf */
1121 for (i
= 0; i
< cmapsz
; i
++) {
1122 err
|= sisusb_writeb(sisusb
,
1123 sisusb
->vrambase
+ offset
+ i
,
1129 for (i
= 0; i
< cmapsz
; i
++) {
1130 err
|= sisusb_readb(sisusb
,
1131 sisusb
->vrambase
+ offset
+ i
,
1138 * In 512-character mode, the character map is not contiguous if
1139 * we want to remain EGA compatible -- which we do
1144 for (i
= 0; i
< cmapsz
; i
++) {
1145 err
|= sisusb_writeb(sisusb
,
1146 sisusb
->vrambase
+ offset
+
1153 for (i
= 0; i
< cmapsz
; i
++) {
1154 err
|= sisusb_readb(sisusb
,
1155 sisusb
->vrambase
+ offset
+
1167 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x00, 0x01); /* Reset */
1168 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x02, 0x03); /* Write to planes 0+1 */
1169 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x04, 0x03); /* Memory mode a0-bf */
1171 sisusb_setidxreg(sisusb
, SISSR
, 0x03, font_select
);
1172 err
|= sisusb_setidxreg(sisusb
, SISSR
, 0x00, 0x03); /* Reset end */
1177 err
|= sisusb_setidxreg(sisusb
, SISGR
, 0x04, 0x00); /* Select plane read 0 */
1178 err
|= sisusb_setidxreg(sisusb
, SISGR
, 0x05, 0x10); /* Enable odd/even */
1179 err
|= sisusb_setidxreg(sisusb
, SISGR
, 0x06, 0x06); /* Address range b8-bf */
1184 if ((set
) && (ch512
!= sisusb
->current_font_512
)) {
1186 /* Font is shared among all our consoles.
1187 * And so is the hi_font_mask.
1189 for (i
= 0; i
< MAX_NR_CONSOLES
; i
++) {
1190 struct vc_data
*c
= vc_cons
[i
].d
;
1191 if (c
&& c
->vc_sw
== &sisusb_con
)
1192 c
->vc_hi_font_mask
= ch512
? 0x0800 : 0;
1195 sisusb
->current_font_512
= ch512
;
1197 /* color plane enable register:
1198 256-char: enable intensity bit
1199 512-char: disable intensity bit */
1200 sisusb_getreg(sisusb
, SISINPSTAT
, &dummy
);
1201 sisusb_setreg(sisusb
, SISAR
, 0x12);
1202 sisusb_setreg(sisusb
, SISAR
, ch512
? 0x07 : 0x0f);
1204 sisusb_getreg(sisusb
, SISINPSTAT
, &dummy
);
1205 sisusb_setreg(sisusb
, SISAR
, 0x20);
1206 sisusb_getreg(sisusb
, SISINPSTAT
, &dummy
);
1212 * Adjust the screen to fit a font of a certain height
1215 unsigned char ovr
, vde
, fsr
;
1216 int rows
= 0, maxscan
= 0;
1220 /* Number of video rows */
1221 rows
= c
->vc_scan_lines
/ fh
;
1222 /* Scan lines to actually display-1 */
1223 maxscan
= rows
* fh
- 1;
1225 /*printk(KERN_DEBUG "sisusb recalc rows %d maxscan %d fh %d sl %d\n",
1226 rows, maxscan, fh, c->vc_scan_lines);*/
1228 sisusb_getidxreg(sisusb
, SISCR
, 0x07, &ovr
);
1229 vde
= maxscan
& 0xff;
1230 ovr
= (ovr
& 0xbd) |
1231 ((maxscan
& 0x100) >> 7) |
1232 ((maxscan
& 0x200) >> 3);
1233 sisusb_setidxreg(sisusb
, SISCR
, 0x07, ovr
);
1234 sisusb_setidxreg(sisusb
, SISCR
, 0x12, vde
);
1238 sisusb_getidxreg(sisusb
, SISCR
, 0x09, &fsr
);
1239 fsr
= (fsr
& 0xe0) | (fh
- 1);
1240 sisusb_setidxreg(sisusb
, SISCR
, 0x09, fsr
);
1241 sisusb
->current_font_height
= fh
;
1243 sisusb
->sisusb_cursor_size_from
= -1;
1244 sisusb
->sisusb_cursor_size_to
= -1;
1249 mutex_unlock(&sisusb
->lock
);
1251 if (dorecalc
&& c
) {
1252 int i
, rows
= c
->vc_scan_lines
/ fh
;
1254 /* Now adjust our consoles' size */
1256 for (i
= 0; i
< MAX_NR_CONSOLES
; i
++) {
1257 struct vc_data
*vc
= vc_cons
[i
].d
;
1259 if (vc
&& vc
->vc_sw
== &sisusb_con
) {
1260 if (CON_IS_VISIBLE(vc
)) {
1261 vc
->vc_sw
->con_cursor(vc
, CM_DRAW
);
1263 vc
->vc_font
.height
= fh
;
1264 vc_resize(vc
, 0, rows
);
1273 mutex_unlock(&sisusb
->lock
);
1278 /* Interface routine */
1280 sisusbcon_font_set(struct vc_data
*c
, struct console_font
*font
,
1283 struct sisusb_usb_data
*sisusb
;
1284 unsigned charcount
= font
->charcount
;
1286 if (font
->width
!= 8 || (charcount
!= 256 && charcount
!= 512))
1289 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
1292 /* sisusb->lock is down */
1294 /* Save the user-provided font into a buffer. This
1295 * is used for restoring text mode after quitting
1296 * from X and for the con_getfont routine.
1298 if (sisusb
->font_backup
) {
1299 if (sisusb
->font_backup_size
< charcount
) {
1300 vfree(sisusb
->font_backup
);
1301 sisusb
->font_backup
= NULL
;
1305 if (!sisusb
->font_backup
)
1306 sisusb
->font_backup
= vmalloc(charcount
* 32);
1308 if (sisusb
->font_backup
) {
1309 memcpy(sisusb
->font_backup
, font
->data
, charcount
* 32);
1310 sisusb
->font_backup_size
= charcount
;
1311 sisusb
->font_backup_height
= font
->height
;
1312 sisusb
->font_backup_512
= (charcount
== 512) ? 1 : 0;
1315 /* do_font_op ups sisusb->lock */
1317 return sisusbcon_do_font_op(sisusb
, 1, 2, font
->data
,
1318 8192, (charcount
== 512),
1319 (!(flags
& KD_FONT_FLAG_DONT_RECALC
)) ? 1 : 0,
1320 c
, font
->height
, 1);
1323 /* Interface routine */
1325 sisusbcon_font_get(struct vc_data
*c
, struct console_font
*font
)
1327 struct sisusb_usb_data
*sisusb
;
1329 if (!(sisusb
= sisusb_get_sisusb_lock_and_check(c
->vc_num
)))
1332 /* sisusb->lock is down */
1335 font
->height
= c
->vc_font
.height
;
1336 font
->charcount
= 256;
1339 mutex_unlock(&sisusb
->lock
);
1343 if (!sisusb
->font_backup
) {
1344 mutex_unlock(&sisusb
->lock
);
1348 /* Copy 256 chars only, like vgacon */
1349 memcpy(font
->data
, sisusb
->font_backup
, 256 * 32);
1351 mutex_unlock(&sisusb
->lock
);
1357 * The console `switch' structure for the sisusb console
1360 static const struct consw sisusb_con
= {
1361 .owner
= THIS_MODULE
,
1362 .con_startup
= sisusbcon_startup
,
1363 .con_init
= sisusbcon_init
,
1364 .con_deinit
= sisusbcon_deinit
,
1365 .con_clear
= sisusbcon_clear
,
1366 .con_putc
= sisusbcon_putc
,
1367 .con_putcs
= sisusbcon_putcs
,
1368 .con_cursor
= sisusbcon_cursor
,
1369 .con_scroll
= sisusbcon_scroll
,
1370 .con_bmove
= sisusbcon_bmove
,
1371 .con_switch
= sisusbcon_switch
,
1372 .con_blank
= sisusbcon_blank
,
1373 .con_font_set
= sisusbcon_font_set
,
1374 .con_font_get
= sisusbcon_font_get
,
1375 .con_set_palette
= sisusbcon_set_palette
,
1376 .con_scrolldelta
= sisusbcon_scrolldelta
,
1377 .con_build_attr
= sisusbcon_build_attr
,
1378 .con_invert_region
= sisusbcon_invert_region
,
1379 .con_set_origin
= sisusbcon_set_origin
,
1380 .con_save_screen
= sisusbcon_save_screen
,
1381 .con_resize
= sisusbcon_resize
,
1384 /* Our very own dummy console driver */
1386 static const char *sisusbdummycon_startup(void)
1388 return "SISUSBVGADUMMY";
1391 static void sisusbdummycon_init(struct vc_data
*vc
, int init
)
1393 vc
->vc_can_do_color
= 1;
1398 vc_resize(vc
, 80, 25);
1401 static int sisusbdummycon_dummy(void)
1406 #define SISUSBCONDUMMY (void *)sisusbdummycon_dummy
1408 static const struct consw sisusb_dummy_con
= {
1409 .owner
= THIS_MODULE
,
1410 .con_startup
= sisusbdummycon_startup
,
1411 .con_init
= sisusbdummycon_init
,
1412 .con_deinit
= SISUSBCONDUMMY
,
1413 .con_clear
= SISUSBCONDUMMY
,
1414 .con_putc
= SISUSBCONDUMMY
,
1415 .con_putcs
= SISUSBCONDUMMY
,
1416 .con_cursor
= SISUSBCONDUMMY
,
1417 .con_scroll
= SISUSBCONDUMMY
,
1418 .con_bmove
= SISUSBCONDUMMY
,
1419 .con_switch
= SISUSBCONDUMMY
,
1420 .con_blank
= SISUSBCONDUMMY
,
1421 .con_font_set
= SISUSBCONDUMMY
,
1422 .con_font_get
= SISUSBCONDUMMY
,
1423 .con_font_default
= SISUSBCONDUMMY
,
1424 .con_font_copy
= SISUSBCONDUMMY
,
1425 .con_set_palette
= SISUSBCONDUMMY
,
1426 .con_scrolldelta
= SISUSBCONDUMMY
,
1430 sisusb_console_init(struct sisusb_usb_data
*sisusb
, int first
, int last
)
1434 mutex_lock(&sisusb
->lock
);
1436 /* Erm.. that should not happen */
1437 if (sisusb
->haveconsole
|| !sisusb
->SiS_Pr
) {
1438 mutex_unlock(&sisusb
->lock
);
1442 sisusb
->con_first
= first
;
1443 sisusb
->con_last
= last
;
1446 first
> MAX_NR_CONSOLES
||
1447 last
> MAX_NR_CONSOLES
) {
1448 mutex_unlock(&sisusb
->lock
);
1452 /* If gfxcore not initialized or no consoles given, quit graciously */
1453 if (!sisusb
->gfxinit
|| first
< 1 || last
< 1) {
1454 mutex_unlock(&sisusb
->lock
);
1458 sisusb
->sisusb_cursor_loc
= -1;
1459 sisusb
->sisusb_cursor_size_from
= -1;
1460 sisusb
->sisusb_cursor_size_to
= -1;
1462 /* Set up text mode (and upload default font) */
1463 if (sisusb_reset_text_mode(sisusb
, 1)) {
1464 mutex_unlock(&sisusb
->lock
);
1465 dev_err(&sisusb
->sisusb_dev
->dev
, "Failed to set up text mode\n");
1469 /* Initialize some gfx registers */
1470 sisusb_initialize(sisusb
);
1472 for (i
= first
- 1; i
<= last
- 1; i
++) {
1473 /* Save sisusb for our interface routines */
1474 mysisusbs
[i
] = sisusb
;
1477 /* Initial console setup */
1478 sisusb
->sisusb_num_columns
= 80;
1480 /* Use a 32K buffer (matches b8000-bffff area) */
1481 sisusb
->scrbuf_size
= 32 * 1024;
1483 /* Allocate screen buffer */
1484 if (!(sisusb
->scrbuf
= (unsigned long)vmalloc(sisusb
->scrbuf_size
))) {
1485 mutex_unlock(&sisusb
->lock
);
1486 dev_err(&sisusb
->sisusb_dev
->dev
, "Failed to allocate screen buffer\n");
1490 mutex_unlock(&sisusb
->lock
);
1492 /* Now grab the desired console(s) */
1493 ret
= take_over_console(&sisusb_con
, first
- 1, last
- 1, 0);
1496 sisusb
->haveconsole
= 1;
1498 for (i
= first
- 1; i
<= last
- 1; i
++)
1499 mysisusbs
[i
] = NULL
;
1506 sisusb_console_exit(struct sisusb_usb_data
*sisusb
)
1510 /* This is called if the device is disconnected
1511 * and while disconnect and lock semaphores
1512 * are up. This should be save because we
1513 * can't lose our sisusb any other way but by
1514 * disconnection (and hence, the disconnect
1515 * sema is for protecting all other access
1516 * functions from disconnection, not the
1520 /* Now what do we do in case of disconnection:
1521 * One alternative would be to simply call
1522 * give_up_console(). Nah, not a good idea.
1523 * give_up_console() is obviously buggy as it
1524 * only discards the consw pointer from the
1525 * driver_map, but doesn't adapt vc->vc_sw
1526 * of the affected consoles. Hence, the next
1527 * call to any of the console functions will
1528 * eventually take a trip to oops county.
1529 * Also, give_up_console for some reason
1530 * doesn't decrement our module refcount.
1531 * Instead, we switch our consoles to a private
1532 * dummy console. This, of course, keeps our
1533 * refcount up as well, but it works perfectly.
1536 if (sisusb
->haveconsole
) {
1537 for (i
= 0; i
< MAX_NR_CONSOLES
; i
++)
1538 if (sisusb
->havethisconsole
[i
])
1539 take_over_console(&sisusb_dummy_con
, i
, i
, 0);
1540 /* At this point, con_deinit for all our
1541 * consoles is executed by take_over_console().
1543 sisusb
->haveconsole
= 0;
1546 vfree((void *)sisusb
->scrbuf
);
1549 vfree(sisusb
->font_backup
);
1550 sisusb
->font_backup
= NULL
;
1553 void __init
sisusb_init_concode(void)
1557 for (i
= 0; i
< MAX_NR_CONSOLES
; i
++)
1558 mysisusbs
[i
] = NULL
;
1561 #endif /* INCL_CON */