2 * arch/arm/mach-dove/irq.c
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/irq.h>
14 #include <linux/gpio.h>
16 #include <asm/mach/arch.h>
18 #include <asm/mach/irq.h>
20 #include <mach/bridge-regs.h>
21 #include <plat/orion-gpio.h>
24 static void pmu_irq_mask(struct irq_data
*d
)
26 int pin
= irq_to_pmu(d
->irq
);
29 u
= readl(PMU_INTERRUPT_MASK
);
30 u
&= ~(1 << (pin
& 31));
31 writel(u
, PMU_INTERRUPT_MASK
);
34 static void pmu_irq_unmask(struct irq_data
*d
)
36 int pin
= irq_to_pmu(d
->irq
);
39 u
= readl(PMU_INTERRUPT_MASK
);
41 writel(u
, PMU_INTERRUPT_MASK
);
44 static void pmu_irq_ack(struct irq_data
*d
)
46 int pin
= irq_to_pmu(d
->irq
);
50 * The PMU mask register is not RW0C: it is RW. This means that
51 * the bits take whatever value is written to them; if you write
52 * a '1', you will set the interrupt.
54 * Unfortunately this means there is NO race free way to clear
57 * So, let's structure the code so that the window is as small as
60 u
= ~(1 << (pin
& 31));
61 u
&= readl_relaxed(PMU_INTERRUPT_CAUSE
);
62 writel_relaxed(u
, PMU_INTERRUPT_CAUSE
);
65 static struct irq_chip pmu_irq_chip
= {
67 .irq_mask
= pmu_irq_mask
,
68 .irq_unmask
= pmu_irq_unmask
,
69 .irq_ack
= pmu_irq_ack
,
72 static void pmu_irq_handler(unsigned int irq
, struct irq_desc
*desc
)
74 unsigned long cause
= readl(PMU_INTERRUPT_CAUSE
);
76 cause
&= readl(PMU_INTERRUPT_MASK
);
78 do_bad_IRQ(irq
, desc
);
82 for (irq
= 0; irq
< NR_PMU_IRQS
; irq
++) {
83 if (!(cause
& (1 << irq
)))
85 irq
= pmu_to_irq(irq
);
86 generic_handle_irq(irq
);
90 static int __initdata gpio0_irqs
[4] = {
97 static int __initdata gpio1_irqs
[4] = {
104 static int __initdata gpio2_irqs
[4] = {
111 void __init
dove_init_irq(void)
115 orion_irq_init(0, IRQ_VIRT_BASE
+ IRQ_MASK_LOW_OFF
);
116 orion_irq_init(32, IRQ_VIRT_BASE
+ IRQ_MASK_HIGH_OFF
);
119 * Initialize gpiolib for GPIOs 0-71.
121 orion_gpio_init(NULL
, 0, 32, DOVE_GPIO_LO_VIRT_BASE
, 0,
122 IRQ_DOVE_GPIO_START
, gpio0_irqs
);
124 orion_gpio_init(NULL
, 32, 32, DOVE_GPIO_HI_VIRT_BASE
, 0,
125 IRQ_DOVE_GPIO_START
+ 32, gpio1_irqs
);
127 orion_gpio_init(NULL
, 64, 8, DOVE_GPIO2_VIRT_BASE
, 0,
128 IRQ_DOVE_GPIO_START
+ 64, gpio2_irqs
);
131 * Mask and clear PMU interrupts
133 writel(0, PMU_INTERRUPT_MASK
);
134 writel(0, PMU_INTERRUPT_CAUSE
);
136 for (i
= IRQ_DOVE_PMU_START
; i
< NR_IRQS
; i
++) {
137 irq_set_chip_and_handler(i
, &pmu_irq_chip
, handle_level_irq
);
138 irq_set_status_flags(i
, IRQ_LEVEL
);
139 set_irq_flags(i
, IRQF_VALID
);
141 irq_set_chained_handler(IRQ_DOVE_PMU
, pmu_irq_handler
);