arch/arm/mach-ux500/platsmp.c

   1 /*
   2  * Copyright (C) 2002 ARM Ltd.
   3  * Copyright (C) 2008 STMicroelctronics.
   4  * Copyright (C) 2009 ST-Ericsson.
   5  * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
   6  *
   7  * This file is based on arm realview platform
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  */
  13 #include <linux/init.h>
  14 #include <linux/errno.h>
  15 #include <linux/delay.h>
  16 #include <linux/device.h>
  17 #include <linux/smp.h>
  18 #include <linux/io.h>
  19
  20 #include <asm/cacheflush.h>
  21 #include <asm/smp_plat.h>
  22 #include <asm/smp_scu.h>
  23
  24 #include "setup.h"
  25
  26 #include "db8500-regs.h"
  27 #include "id.h"
  28
  29 /* This is called from headsmp.S to wakeup the secondary core */
  30 extern void u8500_secondary_startup(void);
  31
  32 /*
  33  * Write pen_release in a way that is guaranteed to be visible to all
  34  * observers, irrespective of whether they're taking part in coherency
  35  * or not.  This is necessary for the hotplug code to work reliably.
  36  */
  37 static void write_pen_release(int val)
  38 {
  39         pen_release = val;
  40         smp_wmb();
  41         __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
  42         outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
  43 }
  44
  45 static void __iomem *scu_base_addr(void)
  46 {
  47         if (cpu_is_u8500_family() || cpu_is_ux540_family())
  48                 return __io_address(U8500_SCU_BASE);
  49         else
  50                 ux500_unknown_soc();
  51
  52         return NULL;
  53 }
  54
  55 static DEFINE_SPINLOCK(boot_lock);
  56
  57 static void __cpuinit ux500_secondary_init(unsigned int cpu)
  58 {
  59         /*
  60          * let the primary processor know we're out of the
  61          * pen, then head off into the C entry point
  62          */
  63         write_pen_release(-1);
  64
  65         /*
  66          * Synchronise with the boot thread.
  67          */
  68         spin_lock(&boot_lock);
  69         spin_unlock(&boot_lock);
  70 }
  71
  72 static int __cpuinit ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
  73 {
  74         unsigned long timeout;
  75
  76         /*
  77          * set synchronisation state between this boot processor
  78          * and the secondary one
  79          */
  80         spin_lock(&boot_lock);
  81
  82         /*
  83          * The secondary processor is waiting to be released from
  84          * the holding pen - release it, then wait for it to flag
  85          * that it has been released by resetting pen_release.
  86          */
  87         write_pen_release(cpu_logical_map(cpu));
  88
  89         arch_send_wakeup_ipi_mask(cpumask_of(cpu));
  90
  91         timeout = jiffies + (1 * HZ);
  92         while (time_before(jiffies, timeout)) {
  93                 if (pen_release == -1)
  94                         break;
  95         }
  96
  97         /*
  98          * now the secondary core is starting up let it run its
  99          * calibrations, then wait for it to finish
 100          */
 101         spin_unlock(&boot_lock);
 102
 103         return pen_release != -1 ? -ENOSYS : 0;
 104 }
 105
 106 static void __init wakeup_secondary(void)
 107 {
 108         void __iomem *backupram;
 109
 110         if (cpu_is_u8500_family() || cpu_is_ux540_family())
 111                 backupram = __io_address(U8500_BACKUPRAM0_BASE);
 112         else
 113                 ux500_unknown_soc();
 114
 115         /*
 116          * write the address of secondary startup into the backup ram register
 117          * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
 118          * backup ram register at offset 0x1FF0, which is what boot rom code
 119          * is waiting for. This would wake up the secondary core from WFE
 120          */
 121 #define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
 122         __raw_writel(virt_to_phys(u8500_secondary_startup),
 123                      backupram + UX500_CPU1_JUMPADDR_OFFSET);
 124
 125 #define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
 126         __raw_writel(0xA1FEED01,
 127                      backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
 128
 129         /* make sure write buffer is drained */
 130         mb();
 131 }
 132
 133 /*
 134  * Initialise the CPU possible map early - this describes the CPUs
 135  * which may be present or become present in the system.
 136  */
 137 static void __init ux500_smp_init_cpus(void)
 138 {
 139         void __iomem *scu_base = scu_base_addr();
 140         unsigned int i, ncores;
 141
 142         ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 143
 144         /* sanity check */
 145         if (ncores > nr_cpu_ids) {
 146                 pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
 147                         ncores, nr_cpu_ids);
 148                 ncores = nr_cpu_ids;
 149         }
 150
 151         for (i = 0; i < ncores; i++)
 152                 set_cpu_possible(i, true);
 153 }
 154
 155 static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
 156 {
 157
 158         scu_enable(scu_base_addr());
 159         wakeup_secondary();
 160 }
 161
 162 struct smp_operations ux500_smp_ops __initdata = {
 163         .smp_init_cpus          = ux500_smp_init_cpus,
 164         .smp_prepare_cpus       = ux500_smp_prepare_cpus,
 165         .smp_secondary_init     = ux500_secondary_init,
 166         .smp_boot_secondary     = ux500_boot_secondary,
 167 #ifdef CONFIG_HOTPLUG_CPU
 168         .cpu_die                = ux500_cpu_die,
 169 #endif
 170 };