1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Adaptec AAC series RAID controller driver
4 * (c) Copyright 2001 Red Hat Inc.
6 * based on the old aacraid driver that is..
7 * Adaptec aacraid device driver for Linux.
9 * Copyright (c) 2000-2010 Adaptec, Inc.
10 * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
11 * 2016-2017 Microsemi Corp. (aacraid@microsemi.com)
16 * Abstract: Contains Interfaces to manage IOs.
19 #include <linux/kernel.h>
20 #include <linux/init.h>
21 #include <linux/types.h>
22 #include <linux/pci.h>
23 #include <linux/spinlock.h>
24 #include <linux/slab.h>
25 #include <linux/completion.h>
26 #include <linux/blkdev.h>
27 #include <linux/uaccess.h>
28 #include <linux/highmem.h> /* For flush_kernel_dcache_page */
29 #include <linux/module.h>
31 #include <asm/unaligned.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_cmnd.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_host.h>
40 /* values for inqd_pdt: Peripheral device type in plain English */
41 #define INQD_PDT_DA 0x00 /* Direct-access (DISK) device */
42 #define INQD_PDT_PROC 0x03 /* Processor device */
43 #define INQD_PDT_CHNGR 0x08 /* Changer (jukebox, scsi2) */
44 #define INQD_PDT_COMM 0x09 /* Communication device (scsi2) */
45 #define INQD_PDT_NOLUN2 0x1f /* Unknown Device (scsi2) */
46 #define INQD_PDT_NOLUN 0x7f /* Logical Unit Not Present */
48 #define INQD_PDT_DMASK 0x1F /* Peripheral Device Type Mask */
49 #define INQD_PDT_QMASK 0xE0 /* Peripheral Device Qualifer Mask */
55 #define SENCODE_NO_SENSE 0x00
56 #define SENCODE_END_OF_DATA 0x00
57 #define SENCODE_BECOMING_READY 0x04
58 #define SENCODE_INIT_CMD_REQUIRED 0x04
59 #define SENCODE_UNRECOVERED_READ_ERROR 0x11
60 #define SENCODE_PARAM_LIST_LENGTH_ERROR 0x1A
61 #define SENCODE_INVALID_COMMAND 0x20
62 #define SENCODE_LBA_OUT_OF_RANGE 0x21
63 #define SENCODE_INVALID_CDB_FIELD 0x24
64 #define SENCODE_LUN_NOT_SUPPORTED 0x25
65 #define SENCODE_INVALID_PARAM_FIELD 0x26
66 #define SENCODE_PARAM_NOT_SUPPORTED 0x26
67 #define SENCODE_PARAM_VALUE_INVALID 0x26
68 #define SENCODE_RESET_OCCURRED 0x29
69 #define SENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x3E
70 #define SENCODE_INQUIRY_DATA_CHANGED 0x3F
71 #define SENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x39
72 #define SENCODE_DIAGNOSTIC_FAILURE 0x40
73 #define SENCODE_INTERNAL_TARGET_FAILURE 0x44
74 #define SENCODE_INVALID_MESSAGE_ERROR 0x49
75 #define SENCODE_LUN_FAILED_SELF_CONFIG 0x4c
76 #define SENCODE_OVERLAPPED_COMMAND 0x4E
79 * Additional sense codes
82 #define ASENCODE_NO_SENSE 0x00
83 #define ASENCODE_END_OF_DATA 0x05
84 #define ASENCODE_BECOMING_READY 0x01
85 #define ASENCODE_INIT_CMD_REQUIRED 0x02
86 #define ASENCODE_PARAM_LIST_LENGTH_ERROR 0x00
87 #define ASENCODE_INVALID_COMMAND 0x00
88 #define ASENCODE_LBA_OUT_OF_RANGE 0x00
89 #define ASENCODE_INVALID_CDB_FIELD 0x00
90 #define ASENCODE_LUN_NOT_SUPPORTED 0x00
91 #define ASENCODE_INVALID_PARAM_FIELD 0x00
92 #define ASENCODE_PARAM_NOT_SUPPORTED 0x01
93 #define ASENCODE_PARAM_VALUE_INVALID 0x02
94 #define ASENCODE_RESET_OCCURRED 0x00
95 #define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x00
96 #define ASENCODE_INQUIRY_DATA_CHANGED 0x03
97 #define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x00
98 #define ASENCODE_DIAGNOSTIC_FAILURE 0x80
99 #define ASENCODE_INTERNAL_TARGET_FAILURE 0x00
100 #define ASENCODE_INVALID_MESSAGE_ERROR 0x00
101 #define ASENCODE_LUN_FAILED_SELF_CONFIG 0x00
102 #define ASENCODE_OVERLAPPED_COMMAND 0x00
104 #define BYTE0(x) (unsigned char)(x)
105 #define BYTE1(x) (unsigned char)((x) >> 8)
106 #define BYTE2(x) (unsigned char)((x) >> 16)
107 #define BYTE3(x) (unsigned char)((x) >> 24)
109 /* MODE_SENSE data format */
116 } __attribute__((packed
)) hd
;
122 } __attribute__((packed
)) bd
;
124 } __attribute__((packed
)) aac_modep_data
;
126 /* MODE_SENSE_10 data format */
134 } __attribute__((packed
)) hd
;
140 } __attribute__((packed
)) bd
;
142 } __attribute__((packed
)) aac_modep10_data
;
144 /*------------------------------------------------------------------------------
145 * S T R U C T S / T Y P E D E F S
146 *----------------------------------------------------------------------------*/
147 /* SCSI inquiry data */
148 struct inquiry_data
{
149 u8 inqd_pdt
; /* Peripheral qualifier | Peripheral Device Type */
150 u8 inqd_dtq
; /* RMB | Device Type Qualifier */
151 u8 inqd_ver
; /* ISO version | ECMA version | ANSI-approved version */
152 u8 inqd_rdf
; /* AENC | TrmIOP | Response data format */
153 u8 inqd_len
; /* Additional length (n-4) */
154 u8 inqd_pad1
[2];/* Reserved - must be zero */
155 u8 inqd_pad2
; /* RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
156 u8 inqd_vid
[8]; /* Vendor ID */
157 u8 inqd_pid
[16];/* Product ID */
158 u8 inqd_prl
[4]; /* Product Revision Level */
161 /* Added for VPD 0x83 */
162 struct tvpd_id_descriptor_type_1
{
163 u8 codeset
:4; /* VPD_CODE_SET */
165 u8 identifiertype
:4; /* VPD_IDENTIFIER_TYPE */
171 u8 serialnumber
[8]; /* SN in ASCII */
175 struct tvpd_id_descriptor_type_2
{
176 u8 codeset
:4; /* VPD_CODE_SET */
178 u8 identifiertype
:4; /* VPD_IDENTIFIER_TYPE */
184 /* The serial number supposed to be 40 bits,
185 * bit we only support 32, so make the last byte zero. */
192 struct tvpd_id_descriptor_type_3
{
193 u8 codeset
: 4; /* VPD_CODE_SET */
195 u8 identifiertype
: 4; /* VPD_IDENTIFIER_TYPE */
204 u8 DeviceTypeQualifier
:3;
208 struct tvpd_id_descriptor_type_1 type1
;
209 struct tvpd_id_descriptor_type_2 type2
;
210 struct tvpd_id_descriptor_type_3 type3
;
214 * M O D U L E G L O B A L S
217 static long aac_build_sg(struct scsi_cmnd
*scsicmd
, struct sgmap
*sgmap
);
218 static long aac_build_sg64(struct scsi_cmnd
*scsicmd
, struct sgmap64
*psg
);
219 static long aac_build_sgraw(struct scsi_cmnd
*scsicmd
, struct sgmapraw
*psg
);
220 static long aac_build_sgraw2(struct scsi_cmnd
*scsicmd
,
221 struct aac_raw_io2
*rio2
, int sg_max
);
222 static long aac_build_sghba(struct scsi_cmnd
*scsicmd
,
223 struct aac_hba_cmd_req
*hbacmd
,
224 int sg_max
, u64 sg_address
);
225 static int aac_convert_sgraw2(struct aac_raw_io2
*rio2
,
226 int pages
, int nseg
, int nseg_new
);
227 static int aac_send_srb_fib(struct scsi_cmnd
* scsicmd
);
228 static int aac_send_hba_fib(struct scsi_cmnd
*scsicmd
);
229 #ifdef AAC_DETAILED_STATUS_INFO
230 static char *aac_get_status_string(u32 status
);
234 * Non dasd selection is handled entirely in aachba now
237 static int nondasd
= -1;
238 static int aac_cache
= 2; /* WCE=0 to avoid performance problems */
239 static int dacmode
= -1;
242 int startup_timeout
= 180;
243 int aif_timeout
= 120;
244 int aac_sync_mode
; /* Only Sync. transfer - disabled */
245 int aac_convert_sgl
= 1; /* convert non-conformable s/g list - enabled */
247 module_param(aac_sync_mode
, int, S_IRUGO
|S_IWUSR
);
248 MODULE_PARM_DESC(aac_sync_mode
, "Force sync. transfer mode"
250 module_param(aac_convert_sgl
, int, S_IRUGO
|S_IWUSR
);
251 MODULE_PARM_DESC(aac_convert_sgl
, "Convert non-conformable s/g list"
253 module_param(nondasd
, int, S_IRUGO
|S_IWUSR
);
254 MODULE_PARM_DESC(nondasd
, "Control scanning of hba for nondasd devices."
256 module_param_named(cache
, aac_cache
, int, S_IRUGO
|S_IWUSR
);
257 MODULE_PARM_DESC(cache
, "Disable Queue Flush commands:\n"
258 "\tbit 0 - Disable FUA in WRITE SCSI commands\n"
259 "\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n"
260 "\tbit 2 - Disable only if Battery is protecting Cache");
261 module_param(dacmode
, int, S_IRUGO
|S_IWUSR
);
262 MODULE_PARM_DESC(dacmode
, "Control whether dma addressing is using 64 bit DAC."
264 module_param_named(commit
, aac_commit
, int, S_IRUGO
|S_IWUSR
);
265 MODULE_PARM_DESC(commit
, "Control whether a COMMIT_CONFIG is issued to the"
266 " adapter for foreign arrays.\n"
267 "This is typically needed in systems that do not have a BIOS."
269 module_param_named(msi
, aac_msi
, int, S_IRUGO
|S_IWUSR
);
270 MODULE_PARM_DESC(msi
, "IRQ handling."
271 " 0=PIC(default), 1=MSI, 2=MSI-X)");
272 module_param(startup_timeout
, int, S_IRUGO
|S_IWUSR
);
273 MODULE_PARM_DESC(startup_timeout
, "The duration of time in seconds to wait for"
274 " adapter to have it's kernel up and\n"
275 "running. This is typically adjusted for large systems that do not"
277 module_param(aif_timeout
, int, S_IRUGO
|S_IWUSR
);
278 MODULE_PARM_DESC(aif_timeout
, "The duration of time in seconds to wait for"
279 " applications to pick up AIFs before\n"
280 "deregistering them. This is typically adjusted for heavily burdened"
284 module_param(aac_fib_dump
, int, 0644);
285 MODULE_PARM_DESC(aac_fib_dump
, "Dump controller fibs prior to IOP_RESET 0=off, 1=on");
288 module_param(numacb
, int, S_IRUGO
|S_IWUSR
);
289 MODULE_PARM_DESC(numacb
, "Request a limit to the number of adapter control"
290 " blocks (FIB) allocated. Valid values are 512 and down. Default is"
291 " to use suggestion from Firmware.");
294 module_param(acbsize
, int, S_IRUGO
|S_IWUSR
);
295 MODULE_PARM_DESC(acbsize
, "Request a specific adapter control block (FIB)"
296 " size. Valid values are 512, 2048, 4096 and 8192. Default is to use"
297 " suggestion from Firmware.");
299 int update_interval
= 30 * 60;
300 module_param(update_interval
, int, S_IRUGO
|S_IWUSR
);
301 MODULE_PARM_DESC(update_interval
, "Interval in seconds between time sync"
302 " updates issued to adapter.");
304 int check_interval
= 60;
305 module_param(check_interval
, int, S_IRUGO
|S_IWUSR
);
306 MODULE_PARM_DESC(check_interval
, "Interval in seconds between adapter health"
309 int aac_check_reset
= 1;
310 module_param_named(check_reset
, aac_check_reset
, int, S_IRUGO
|S_IWUSR
);
311 MODULE_PARM_DESC(check_reset
, "If adapter fails health check, reset the"
312 " adapter. a value of -1 forces the reset to adapters programmed to"
315 int expose_physicals
= -1;
316 module_param(expose_physicals
, int, S_IRUGO
|S_IWUSR
);
317 MODULE_PARM_DESC(expose_physicals
, "Expose physical components of the arrays."
318 " -1=protect 0=off, 1=on");
320 int aac_reset_devices
;
321 module_param_named(reset_devices
, aac_reset_devices
, int, S_IRUGO
|S_IWUSR
);
322 MODULE_PARM_DESC(reset_devices
, "Force an adapter reset at initialization.");
325 module_param_named(wwn
, aac_wwn
, int, S_IRUGO
|S_IWUSR
);
326 MODULE_PARM_DESC(wwn
, "Select a WWN type for the arrays:\n"
328 "\t1 - Array Meta Data Signature (default)\n"
329 "\t2 - Adapter Serial Number");
332 static inline int aac_valid_context(struct scsi_cmnd
*scsicmd
,
333 struct fib
*fibptr
) {
334 struct scsi_device
*device
;
336 if (unlikely(!scsicmd
|| !scsicmd
->scsi_done
)) {
337 dprintk((KERN_WARNING
"aac_valid_context: scsi command corrupt\n"));
338 aac_fib_complete(fibptr
);
341 scsicmd
->SCp
.phase
= AAC_OWNER_MIDLEVEL
;
342 device
= scsicmd
->device
;
343 if (unlikely(!device
)) {
344 dprintk((KERN_WARNING
"aac_valid_context: scsi device corrupt\n"));
345 aac_fib_complete(fibptr
);
352 * aac_get_config_status - check the adapter configuration
353 * @common: adapter to query
355 * Query config status, and commit the configuration if needed.
357 int aac_get_config_status(struct aac_dev
*dev
, int commit_flag
)
362 if (!(fibptr
= aac_fib_alloc(dev
)))
365 aac_fib_init(fibptr
);
367 struct aac_get_config_status
*dinfo
;
368 dinfo
= (struct aac_get_config_status
*) fib_data(fibptr
);
370 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
371 dinfo
->type
= cpu_to_le32(CT_GET_CONFIG_STATUS
);
372 dinfo
->count
= cpu_to_le32(sizeof(((struct aac_get_config_status_resp
*)NULL
)->data
));
375 status
= aac_fib_send(ContainerCommand
,
377 sizeof (struct aac_get_config_status
),
382 printk(KERN_WARNING
"aac_get_config_status: SendFIB failed.\n");
384 struct aac_get_config_status_resp
*reply
385 = (struct aac_get_config_status_resp
*) fib_data(fibptr
);
386 dprintk((KERN_WARNING
387 "aac_get_config_status: response=%d status=%d action=%d\n",
388 le32_to_cpu(reply
->response
),
389 le32_to_cpu(reply
->status
),
390 le32_to_cpu(reply
->data
.action
)));
391 if ((le32_to_cpu(reply
->response
) != ST_OK
) ||
392 (le32_to_cpu(reply
->status
) != CT_OK
) ||
393 (le32_to_cpu(reply
->data
.action
) > CFACT_PAUSE
)) {
394 printk(KERN_WARNING
"aac_get_config_status: Will not issue the Commit Configuration\n");
398 /* Do not set XferState to zero unless receives a response from F/W */
400 aac_fib_complete(fibptr
);
402 /* Send a CT_COMMIT_CONFIG to enable discovery of devices */
404 if ((aac_commit
== 1) || commit_flag
) {
405 struct aac_commit_config
* dinfo
;
406 aac_fib_init(fibptr
);
407 dinfo
= (struct aac_commit_config
*) fib_data(fibptr
);
409 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
410 dinfo
->type
= cpu_to_le32(CT_COMMIT_CONFIG
);
412 status
= aac_fib_send(ContainerCommand
,
414 sizeof (struct aac_commit_config
),
418 /* Do not set XferState to zero unless
419 * receives a response from F/W */
421 aac_fib_complete(fibptr
);
422 } else if (aac_commit
== 0) {
424 "aac_get_config_status: Foreign device configurations are being ignored\n");
427 /* FIB should be freed only after getting the response from the F/W */
428 if (status
!= -ERESTARTSYS
)
429 aac_fib_free(fibptr
);
433 static void aac_expose_phy_device(struct scsi_cmnd
*scsicmd
)
436 scsi_sg_copy_to_buffer(scsicmd
, &inq_data
, sizeof(inq_data
));
437 if ((inq_data
& 0x20) && (inq_data
& 0x1f) == TYPE_DISK
) {
439 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
, sizeof(inq_data
));
444 * aac_get_containers - list containers
445 * @common: adapter to probe
447 * Make a list of all containers on this controller
449 int aac_get_containers(struct aac_dev
*dev
)
451 struct fsa_dev_info
*fsa_dev_ptr
;
455 struct aac_get_container_count
*dinfo
;
456 struct aac_get_container_count_resp
*dresp
;
457 int maximum_num_containers
= MAXIMUM_NUM_CONTAINERS
;
459 if (!(fibptr
= aac_fib_alloc(dev
)))
462 aac_fib_init(fibptr
);
463 dinfo
= (struct aac_get_container_count
*) fib_data(fibptr
);
464 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
465 dinfo
->type
= cpu_to_le32(CT_GET_CONTAINER_COUNT
);
467 status
= aac_fib_send(ContainerCommand
,
469 sizeof (struct aac_get_container_count
),
474 dresp
= (struct aac_get_container_count_resp
*)fib_data(fibptr
);
475 maximum_num_containers
= le32_to_cpu(dresp
->ContainerSwitchEntries
);
476 if (fibptr
->dev
->supplement_adapter_info
.supported_options2
&
477 AAC_OPTION_SUPPORTED_240_VOLUMES
) {
478 maximum_num_containers
=
479 le32_to_cpu(dresp
->MaxSimpleVolumes
);
481 aac_fib_complete(fibptr
);
483 /* FIB should be freed only after getting the response from the F/W */
484 if (status
!= -ERESTARTSYS
)
485 aac_fib_free(fibptr
);
487 if (maximum_num_containers
< MAXIMUM_NUM_CONTAINERS
)
488 maximum_num_containers
= MAXIMUM_NUM_CONTAINERS
;
489 if (dev
->fsa_dev
== NULL
||
490 dev
->maximum_num_containers
!= maximum_num_containers
) {
492 fsa_dev_ptr
= dev
->fsa_dev
;
494 dev
->fsa_dev
= kcalloc(maximum_num_containers
,
495 sizeof(*fsa_dev_ptr
), GFP_KERNEL
);
504 dev
->maximum_num_containers
= maximum_num_containers
;
506 for (index
= 0; index
< dev
->maximum_num_containers
; index
++) {
507 dev
->fsa_dev
[index
].devname
[0] = '\0';
508 dev
->fsa_dev
[index
].valid
= 0;
510 status
= aac_probe_container(dev
, index
);
513 printk(KERN_WARNING
"aac_get_containers: SendFIB failed.\n");
520 static void get_container_name_callback(void *context
, struct fib
* fibptr
)
522 struct aac_get_name_resp
* get_name_reply
;
523 struct scsi_cmnd
* scsicmd
;
525 scsicmd
= (struct scsi_cmnd
*) context
;
527 if (!aac_valid_context(scsicmd
, fibptr
))
530 dprintk((KERN_DEBUG
"get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies
));
531 BUG_ON(fibptr
== NULL
);
533 get_name_reply
= (struct aac_get_name_resp
*) fib_data(fibptr
);
534 /* Failure is irrelevant, using default value instead */
535 if ((le32_to_cpu(get_name_reply
->status
) == CT_OK
)
536 && (get_name_reply
->data
[0] != '\0')) {
537 char *sp
= get_name_reply
->data
;
538 int data_size
= FIELD_SIZEOF(struct aac_get_name_resp
, data
);
540 sp
[data_size
- 1] = '\0';
544 struct inquiry_data inq
;
545 char d
[sizeof(((struct inquiry_data
*)NULL
)->inqd_pid
)];
546 int count
= sizeof(d
);
549 *dp
++ = (*sp
) ? *sp
++ : ' ';
550 } while (--count
> 0);
552 scsi_sg_copy_to_buffer(scsicmd
, &inq
, sizeof(inq
));
553 memcpy(inq
.inqd_pid
, d
, sizeof(d
));
554 scsi_sg_copy_from_buffer(scsicmd
, &inq
, sizeof(inq
));
558 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
560 aac_fib_complete(fibptr
);
561 scsicmd
->scsi_done(scsicmd
);
565 * aac_get_container_name - get container name, none blocking.
567 static int aac_get_container_name(struct scsi_cmnd
* scsicmd
)
571 struct aac_get_name
*dinfo
;
572 struct fib
* cmd_fibcontext
;
573 struct aac_dev
* dev
;
575 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
577 data_size
= FIELD_SIZEOF(struct aac_get_name_resp
, data
);
579 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
581 aac_fib_init(cmd_fibcontext
);
582 dinfo
= (struct aac_get_name
*) fib_data(cmd_fibcontext
);
583 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
585 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
586 dinfo
->type
= cpu_to_le32(CT_READ_NAME
);
587 dinfo
->cid
= cpu_to_le32(scmd_id(scsicmd
));
588 dinfo
->count
= cpu_to_le32(data_size
- 1);
590 status
= aac_fib_send(ContainerCommand
,
592 sizeof(struct aac_get_name_resp
),
595 (fib_callback
)get_container_name_callback
,
599 * Check that the command queued to the controller
601 if (status
== -EINPROGRESS
)
604 printk(KERN_WARNING
"aac_get_container_name: aac_fib_send failed with status: %d.\n", status
);
605 aac_fib_complete(cmd_fibcontext
);
609 static int aac_probe_container_callback2(struct scsi_cmnd
* scsicmd
)
611 struct fsa_dev_info
*fsa_dev_ptr
= ((struct aac_dev
*)(scsicmd
->device
->host
->hostdata
))->fsa_dev
;
613 if ((fsa_dev_ptr
[scmd_id(scsicmd
)].valid
& 1))
614 return aac_scsi_cmd(scsicmd
);
616 scsicmd
->result
= DID_NO_CONNECT
<< 16;
617 scsicmd
->scsi_done(scsicmd
);
621 static void _aac_probe_container2(void * context
, struct fib
* fibptr
)
623 struct fsa_dev_info
*fsa_dev_ptr
;
624 int (*callback
)(struct scsi_cmnd
*);
625 struct scsi_cmnd
* scsicmd
= (struct scsi_cmnd
*)context
;
629 if (!aac_valid_context(scsicmd
, fibptr
))
632 scsicmd
->SCp
.Status
= 0;
633 fsa_dev_ptr
= fibptr
->dev
->fsa_dev
;
635 struct aac_mount
* dresp
= (struct aac_mount
*) fib_data(fibptr
);
638 fsa_dev_ptr
+= scmd_id(scsicmd
);
640 fibptr
->dev
->supplement_adapter_info
.supported_options2
;
642 if ((le32_to_cpu(dresp
->status
) == ST_OK
) &&
643 (le32_to_cpu(dresp
->mnt
[0].vol
) != CT_NONE
) &&
644 (le32_to_cpu(dresp
->mnt
[0].state
) != FSCS_HIDDEN
)) {
645 if (!(sup_options2
& AAC_OPTION_VARIABLE_BLOCK_SIZE
)) {
646 dresp
->mnt
[0].fileinfo
.bdevinfo
.block_size
= 0x200;
647 fsa_dev_ptr
->block_size
= 0x200;
649 fsa_dev_ptr
->block_size
=
650 le32_to_cpu(dresp
->mnt
[0].fileinfo
.bdevinfo
.block_size
);
652 for (i
= 0; i
< 16; i
++)
653 fsa_dev_ptr
->identifier
[i
] =
654 dresp
->mnt
[0].fileinfo
.bdevinfo
656 fsa_dev_ptr
->valid
= 1;
657 /* sense_key holds the current state of the spin-up */
658 if (dresp
->mnt
[0].state
& cpu_to_le32(FSCS_NOT_READY
))
659 fsa_dev_ptr
->sense_data
.sense_key
= NOT_READY
;
660 else if (fsa_dev_ptr
->sense_data
.sense_key
== NOT_READY
)
661 fsa_dev_ptr
->sense_data
.sense_key
= NO_SENSE
;
662 fsa_dev_ptr
->type
= le32_to_cpu(dresp
->mnt
[0].vol
);
664 = ((u64
)le32_to_cpu(dresp
->mnt
[0].capacity
)) +
665 (((u64
)le32_to_cpu(dresp
->mnt
[0].capacityhigh
)) << 32);
666 fsa_dev_ptr
->ro
= ((le32_to_cpu(dresp
->mnt
[0].state
) & FSCS_READONLY
) != 0);
668 if ((fsa_dev_ptr
->valid
& 1) == 0)
669 fsa_dev_ptr
->valid
= 0;
670 scsicmd
->SCp
.Status
= le32_to_cpu(dresp
->count
);
672 aac_fib_complete(fibptr
);
673 aac_fib_free(fibptr
);
674 callback
= (int (*)(struct scsi_cmnd
*))(scsicmd
->SCp
.ptr
);
675 scsicmd
->SCp
.ptr
= NULL
;
676 (*callback
)(scsicmd
);
680 static void _aac_probe_container1(void * context
, struct fib
* fibptr
)
682 struct scsi_cmnd
* scsicmd
;
683 struct aac_mount
* dresp
;
684 struct aac_query_mount
*dinfo
;
687 dresp
= (struct aac_mount
*) fib_data(fibptr
);
688 if (!aac_supports_2T(fibptr
->dev
)) {
689 dresp
->mnt
[0].capacityhigh
= 0;
690 if ((le32_to_cpu(dresp
->status
) == ST_OK
) &&
691 (le32_to_cpu(dresp
->mnt
[0].vol
) != CT_NONE
)) {
692 _aac_probe_container2(context
, fibptr
);
696 scsicmd
= (struct scsi_cmnd
*) context
;
698 if (!aac_valid_context(scsicmd
, fibptr
))
701 aac_fib_init(fibptr
);
703 dinfo
= (struct aac_query_mount
*)fib_data(fibptr
);
705 if (fibptr
->dev
->supplement_adapter_info
.supported_options2
&
706 AAC_OPTION_VARIABLE_BLOCK_SIZE
)
707 dinfo
->command
= cpu_to_le32(VM_NameServeAllBlk
);
709 dinfo
->command
= cpu_to_le32(VM_NameServe64
);
711 dinfo
->count
= cpu_to_le32(scmd_id(scsicmd
));
712 dinfo
->type
= cpu_to_le32(FT_FILESYS
);
713 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
715 status
= aac_fib_send(ContainerCommand
,
717 sizeof(struct aac_query_mount
),
720 _aac_probe_container2
,
723 * Check that the command queued to the controller
725 if (status
< 0 && status
!= -EINPROGRESS
) {
726 /* Inherit results from VM_NameServe, if any */
727 dresp
->status
= cpu_to_le32(ST_OK
);
728 _aac_probe_container2(context
, fibptr
);
732 static int _aac_probe_container(struct scsi_cmnd
* scsicmd
, int (*callback
)(struct scsi_cmnd
*))
735 int status
= -ENOMEM
;
737 if ((fibptr
= aac_fib_alloc((struct aac_dev
*)scsicmd
->device
->host
->hostdata
))) {
738 struct aac_query_mount
*dinfo
;
740 aac_fib_init(fibptr
);
742 dinfo
= (struct aac_query_mount
*)fib_data(fibptr
);
744 if (fibptr
->dev
->supplement_adapter_info
.supported_options2
&
745 AAC_OPTION_VARIABLE_BLOCK_SIZE
)
746 dinfo
->command
= cpu_to_le32(VM_NameServeAllBlk
);
748 dinfo
->command
= cpu_to_le32(VM_NameServe
);
750 dinfo
->count
= cpu_to_le32(scmd_id(scsicmd
));
751 dinfo
->type
= cpu_to_le32(FT_FILESYS
);
752 scsicmd
->SCp
.ptr
= (char *)callback
;
753 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
755 status
= aac_fib_send(ContainerCommand
,
757 sizeof(struct aac_query_mount
),
760 _aac_probe_container1
,
763 * Check that the command queued to the controller
765 if (status
== -EINPROGRESS
)
769 scsicmd
->SCp
.ptr
= NULL
;
770 aac_fib_complete(fibptr
);
771 aac_fib_free(fibptr
);
775 struct fsa_dev_info
*fsa_dev_ptr
= ((struct aac_dev
*)(scsicmd
->device
->host
->hostdata
))->fsa_dev
;
777 fsa_dev_ptr
+= scmd_id(scsicmd
);
778 if ((fsa_dev_ptr
->valid
& 1) == 0) {
779 fsa_dev_ptr
->valid
= 0;
780 return (*callback
)(scsicmd
);
788 * aac_probe_container - query a logical volume
789 * @dev: device to query
790 * @cid: container identifier
792 * Queries the controller about the given volume. The volume information
793 * is updated in the struct fsa_dev_info structure rather than returned.
795 static int aac_probe_container_callback1(struct scsi_cmnd
* scsicmd
)
797 scsicmd
->device
= NULL
;
801 int aac_probe_container(struct aac_dev
*dev
, int cid
)
803 struct scsi_cmnd
*scsicmd
= kmalloc(sizeof(*scsicmd
), GFP_KERNEL
);
804 struct scsi_device
*scsidev
= kmalloc(sizeof(*scsidev
), GFP_KERNEL
);
807 if (!scsicmd
|| !scsidev
) {
812 scsicmd
->list
.next
= NULL
;
813 scsicmd
->scsi_done
= (void (*)(struct scsi_cmnd
*))aac_probe_container_callback1
;
815 scsicmd
->device
= scsidev
;
816 scsidev
->sdev_state
= 0;
818 scsidev
->host
= dev
->scsi_host_ptr
;
820 if (_aac_probe_container(scsicmd
, aac_probe_container_callback1
) == 0)
821 while (scsicmd
->device
== scsidev
)
824 status
= scsicmd
->SCp
.Status
;
829 /* Local Structure to set SCSI inquiry data strings */
831 char vid
[8]; /* Vendor ID */
832 char pid
[16]; /* Product ID */
833 char prl
[4]; /* Product Revision Level */
837 * InqStrCopy - string merge
838 * @a: string to copy from
839 * @b: string to copy to
841 * Copy a String from one location to another
845 static void inqstrcpy(char *a
, char *b
)
848 while (*a
!= (char)0)
852 static char *container_types
[] = {
876 char * get_container_type(unsigned tindex
)
878 if (tindex
>= ARRAY_SIZE(container_types
))
879 tindex
= ARRAY_SIZE(container_types
) - 1;
880 return container_types
[tindex
];
883 /* Function: setinqstr
885 * Arguments: [1] pointer to void [1] int
887 * Purpose: Sets SCSI inquiry data strings for vendor, product
888 * and revision level. Allows strings to be set in platform dependent
889 * files instead of in OS dependent driver source.
892 static void setinqstr(struct aac_dev
*dev
, void *data
, int tindex
)
894 struct scsi_inq
*str
;
895 struct aac_supplement_adapter_info
*sup_adap_info
;
897 sup_adap_info
= &dev
->supplement_adapter_info
;
898 str
= (struct scsi_inq
*)(data
); /* cast data to scsi inq block */
899 memset(str
, ' ', sizeof(*str
));
901 if (sup_adap_info
->adapter_type_text
[0]) {
904 char *cname
= kmemdup(sup_adap_info
->adapter_type_text
,
905 sizeof(sup_adap_info
->adapter_type_text
),
911 if ((cp
[0] == 'A') && (cp
[1] == 'O') && (cp
[2] == 'C'))
912 inqstrcpy("SMC", str
->vid
);
914 c
= sizeof(str
->vid
);
915 while (*cp
&& *cp
!= ' ' && --c
)
919 inqstrcpy(cname
, str
->vid
);
921 while (*cp
&& *cp
!= ' ')
926 /* last six chars reserved for vol type */
927 if (strlen(cp
) > sizeof(str
->pid
))
928 cp
[sizeof(str
->pid
)] = '\0';
929 inqstrcpy (cp
, str
->pid
);
933 struct aac_driver_ident
*mp
= aac_get_driver_ident(dev
->cardtype
);
935 inqstrcpy (mp
->vname
, str
->vid
);
936 /* last six chars reserved for vol type */
937 inqstrcpy (mp
->model
, str
->pid
);
940 if (tindex
< ARRAY_SIZE(container_types
)){
941 char *findit
= str
->pid
;
943 for ( ; *findit
!= ' '; findit
++); /* walk till we find a space */
944 /* RAID is superfluous in the context of a RAID device */
945 if (memcmp(findit
-4, "RAID", 4) == 0)
946 *(findit
-= 4) = ' ';
947 if (((findit
- str
->pid
) + strlen(container_types
[tindex
]))
948 < (sizeof(str
->pid
) + sizeof(str
->prl
)))
949 inqstrcpy (container_types
[tindex
], findit
+ 1);
951 inqstrcpy ("V1.0", str
->prl
);
954 static void build_vpd83_type3(struct tvpd_page83
*vpdpage83data
,
955 struct aac_dev
*dev
, struct scsi_cmnd
*scsicmd
)
959 vpdpage83data
->type3
.codeset
= 1;
960 vpdpage83data
->type3
.identifiertype
= 3;
961 vpdpage83data
->type3
.identifierlength
= sizeof(vpdpage83data
->type3
)
964 for (container
= 0; container
< dev
->maximum_num_containers
;
967 if (scmd_id(scsicmd
) == container
) {
968 memcpy(vpdpage83data
->type3
.Identifier
,
969 dev
->fsa_dev
[container
].identifier
,
976 static void get_container_serial_callback(void *context
, struct fib
* fibptr
)
978 struct aac_get_serial_resp
* get_serial_reply
;
979 struct scsi_cmnd
* scsicmd
;
981 BUG_ON(fibptr
== NULL
);
983 scsicmd
= (struct scsi_cmnd
*) context
;
984 if (!aac_valid_context(scsicmd
, fibptr
))
987 get_serial_reply
= (struct aac_get_serial_resp
*) fib_data(fibptr
);
988 /* Failure is irrelevant, using default value instead */
989 if (le32_to_cpu(get_serial_reply
->status
) == CT_OK
) {
990 /*Check to see if it's for VPD 0x83 or 0x80 */
991 if (scsicmd
->cmnd
[2] == 0x83) {
992 /* vpd page 0x83 - Device Identification Page */
995 struct tvpd_page83 vpdpage83data
;
997 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
999 memset(((u8
*)&vpdpage83data
), 0,
1000 sizeof(vpdpage83data
));
1002 /* DIRECT_ACCESS_DEVIC */
1003 vpdpage83data
.DeviceType
= 0;
1004 /* DEVICE_CONNECTED */
1005 vpdpage83data
.DeviceTypeQualifier
= 0;
1006 /* VPD_DEVICE_IDENTIFIERS */
1007 vpdpage83data
.PageCode
= 0x83;
1008 vpdpage83data
.reserved
= 0;
1009 vpdpage83data
.PageLength
=
1010 sizeof(vpdpage83data
.type1
) +
1011 sizeof(vpdpage83data
.type2
);
1013 /* VPD 83 Type 3 is not supported for ARC */
1014 if (dev
->sa_firmware
)
1015 vpdpage83data
.PageLength
+=
1016 sizeof(vpdpage83data
.type3
);
1018 /* T10 Vendor Identifier Field Format */
1019 /* VpdcodesetAscii */
1020 vpdpage83data
.type1
.codeset
= 2;
1021 /* VpdIdentifierTypeVendorId */
1022 vpdpage83data
.type1
.identifiertype
= 1;
1023 vpdpage83data
.type1
.identifierlength
=
1024 sizeof(vpdpage83data
.type1
) - 4;
1026 /* "ADAPTEC " for adaptec */
1027 memcpy(vpdpage83data
.type1
.venid
,
1029 sizeof(vpdpage83data
.type1
.venid
));
1030 memcpy(vpdpage83data
.type1
.productid
,
1033 vpdpage83data
.type1
.productid
));
1035 /* Convert to ascii based serial number.
1036 * The LSB is the the end.
1038 for (i
= 0; i
< 8; i
++) {
1040 (u8
)((get_serial_reply
->uid
>> ((7 - i
) * 4)) & 0xF);
1042 vpdpage83data
.type1
.serialnumber
[i
] =
1045 vpdpage83data
.type1
.serialnumber
[i
] =
1050 /* VpdCodeSetBinary */
1051 vpdpage83data
.type2
.codeset
= 1;
1052 /* VpdidentifiertypeEUI64 */
1053 vpdpage83data
.type2
.identifiertype
= 2;
1054 vpdpage83data
.type2
.identifierlength
=
1055 sizeof(vpdpage83data
.type2
) - 4;
1057 vpdpage83data
.type2
.eu64id
.venid
[0] = 0xD0;
1058 vpdpage83data
.type2
.eu64id
.venid
[1] = 0;
1059 vpdpage83data
.type2
.eu64id
.venid
[2] = 0;
1061 vpdpage83data
.type2
.eu64id
.Serial
=
1062 get_serial_reply
->uid
;
1063 vpdpage83data
.type2
.eu64id
.reserved
= 0;
1066 * VpdIdentifierTypeFCPHName
1067 * VPD 0x83 Type 3 not supported for ARC
1069 if (dev
->sa_firmware
) {
1070 build_vpd83_type3(&vpdpage83data
,
1074 /* Move the inquiry data to the response buffer. */
1075 scsi_sg_copy_from_buffer(scsicmd
, &vpdpage83data
,
1076 sizeof(vpdpage83data
));
1078 /* It must be for VPD 0x80 */
1081 sp
[0] = INQD_PDT_DA
;
1082 sp
[1] = scsicmd
->cmnd
[2];
1084 sp
[3] = snprintf(sp
+4, sizeof(sp
)-4, "%08X",
1085 le32_to_cpu(get_serial_reply
->uid
));
1086 scsi_sg_copy_from_buffer(scsicmd
, sp
,
1091 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
1093 aac_fib_complete(fibptr
);
1094 scsicmd
->scsi_done(scsicmd
);
1098 * aac_get_container_serial - get container serial, none blocking.
1100 static int aac_get_container_serial(struct scsi_cmnd
* scsicmd
)
1103 struct aac_get_serial
*dinfo
;
1104 struct fib
* cmd_fibcontext
;
1105 struct aac_dev
* dev
;
1107 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
1109 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
1111 aac_fib_init(cmd_fibcontext
);
1112 dinfo
= (struct aac_get_serial
*) fib_data(cmd_fibcontext
);
1114 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
1115 dinfo
->type
= cpu_to_le32(CT_CID_TO_32BITS_UID
);
1116 dinfo
->cid
= cpu_to_le32(scmd_id(scsicmd
));
1117 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
1119 status
= aac_fib_send(ContainerCommand
,
1121 sizeof(struct aac_get_serial_resp
),
1124 (fib_callback
) get_container_serial_callback
,
1128 * Check that the command queued to the controller
1130 if (status
== -EINPROGRESS
)
1133 printk(KERN_WARNING
"aac_get_container_serial: aac_fib_send failed with status: %d.\n", status
);
1134 aac_fib_complete(cmd_fibcontext
);
1138 /* Function: setinqserial
1140 * Arguments: [1] pointer to void [1] int
1142 * Purpose: Sets SCSI Unit Serial number.
1143 * This is a fake. We should read a proper
1144 * serial number from the container. <SuSE>But
1145 * without docs it's quite hard to do it :-)
1146 * So this will have to do in the meantime.</SuSE>
1149 static int setinqserial(struct aac_dev
*dev
, void *data
, int cid
)
1152 * This breaks array migration.
1154 return snprintf((char *)(data
), sizeof(struct scsi_inq
) - 4, "%08X%02X",
1155 le32_to_cpu(dev
->adapter_info
.serial
[0]), cid
);
1158 static inline void set_sense(struct sense_data
*sense_data
, u8 sense_key
,
1159 u8 sense_code
, u8 a_sense_code
, u8 bit_pointer
, u16 field_pointer
)
1161 u8
*sense_buf
= (u8
*)sense_data
;
1162 /* Sense data valid, err code 70h */
1163 sense_buf
[0] = 0x70; /* No info field */
1164 sense_buf
[1] = 0; /* Segment number, always zero */
1166 sense_buf
[2] = sense_key
; /* Sense key */
1168 sense_buf
[12] = sense_code
; /* Additional sense code */
1169 sense_buf
[13] = a_sense_code
; /* Additional sense code qualifier */
1171 if (sense_key
== ILLEGAL_REQUEST
) {
1172 sense_buf
[7] = 10; /* Additional sense length */
1174 sense_buf
[15] = bit_pointer
;
1175 /* Illegal parameter is in the parameter block */
1176 if (sense_code
== SENCODE_INVALID_CDB_FIELD
)
1177 sense_buf
[15] |= 0xc0;/* Std sense key specific field */
1178 /* Illegal parameter is in the CDB block */
1179 sense_buf
[16] = field_pointer
>> 8; /* MSB */
1180 sense_buf
[17] = field_pointer
; /* LSB */
1182 sense_buf
[7] = 6; /* Additional sense length */
1185 static int aac_bounds_32(struct aac_dev
* dev
, struct scsi_cmnd
* cmd
, u64 lba
)
1187 if (lba
& 0xffffffff00000000LL
) {
1188 int cid
= scmd_id(cmd
);
1189 dprintk((KERN_DEBUG
"aacraid: Illegal lba\n"));
1190 cmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
1191 SAM_STAT_CHECK_CONDITION
;
1192 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
1193 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
1194 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
1195 memcpy(cmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
1196 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
1197 SCSI_SENSE_BUFFERSIZE
));
1198 cmd
->scsi_done(cmd
);
1204 static int aac_bounds_64(struct aac_dev
* dev
, struct scsi_cmnd
* cmd
, u64 lba
)
1209 static void io_callback(void *context
, struct fib
* fibptr
);
1211 static int aac_read_raw_io(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
1213 struct aac_dev
*dev
= fib
->dev
;
1214 u16 fibsize
, command
;
1218 if ((dev
->comm_interface
== AAC_COMM_MESSAGE_TYPE2
||
1219 dev
->comm_interface
== AAC_COMM_MESSAGE_TYPE3
) &&
1221 struct aac_raw_io2
*readcmd2
;
1222 readcmd2
= (struct aac_raw_io2
*) fib_data(fib
);
1223 memset(readcmd2
, 0, sizeof(struct aac_raw_io2
));
1224 readcmd2
->blockLow
= cpu_to_le32((u32
)(lba
&0xffffffff));
1225 readcmd2
->blockHigh
= cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1226 readcmd2
->byteCount
= cpu_to_le32(count
*
1227 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1228 readcmd2
->cid
= cpu_to_le16(scmd_id(cmd
));
1229 readcmd2
->flags
= cpu_to_le16(RIO2_IO_TYPE_READ
);
1230 ret
= aac_build_sgraw2(cmd
, readcmd2
,
1231 dev
->scsi_host_ptr
->sg_tablesize
);
1234 command
= ContainerRawIo2
;
1235 fibsize
= sizeof(struct aac_raw_io2
) +
1236 ((le32_to_cpu(readcmd2
->sgeCnt
)-1) * sizeof(struct sge_ieee1212
));
1238 struct aac_raw_io
*readcmd
;
1239 readcmd
= (struct aac_raw_io
*) fib_data(fib
);
1240 readcmd
->block
[0] = cpu_to_le32((u32
)(lba
&0xffffffff));
1241 readcmd
->block
[1] = cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1242 readcmd
->count
= cpu_to_le32(count
*
1243 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1244 readcmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1245 readcmd
->flags
= cpu_to_le16(RIO_TYPE_READ
);
1246 readcmd
->bpTotal
= 0;
1247 readcmd
->bpComplete
= 0;
1248 ret
= aac_build_sgraw(cmd
, &readcmd
->sg
);
1251 command
= ContainerRawIo
;
1252 fibsize
= sizeof(struct aac_raw_io
) +
1253 ((le32_to_cpu(readcmd
->sg
.count
)-1) * sizeof(struct sgentryraw
));
1256 BUG_ON(fibsize
> (fib
->dev
->max_fib_size
- sizeof(struct aac_fibhdr
)));
1258 * Now send the Fib to the adapter
1260 return aac_fib_send(command
,
1265 (fib_callback
) io_callback
,
1269 static int aac_read_block64(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
1272 struct aac_read64
*readcmd
;
1276 readcmd
= (struct aac_read64
*) fib_data(fib
);
1277 readcmd
->command
= cpu_to_le32(VM_CtHostRead64
);
1278 readcmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1279 readcmd
->sector_count
= cpu_to_le16(count
);
1280 readcmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1284 ret
= aac_build_sg64(cmd
, &readcmd
->sg
);
1287 fibsize
= sizeof(struct aac_read64
) +
1288 ((le32_to_cpu(readcmd
->sg
.count
) - 1) *
1289 sizeof (struct sgentry64
));
1290 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1291 sizeof(struct aac_fibhdr
)));
1293 * Now send the Fib to the adapter
1295 return aac_fib_send(ContainerCommand64
,
1300 (fib_callback
) io_callback
,
1304 static int aac_read_block(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
1307 struct aac_read
*readcmd
;
1308 struct aac_dev
*dev
= fib
->dev
;
1312 readcmd
= (struct aac_read
*) fib_data(fib
);
1313 readcmd
->command
= cpu_to_le32(VM_CtBlockRead
);
1314 readcmd
->cid
= cpu_to_le32(scmd_id(cmd
));
1315 readcmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1316 readcmd
->count
= cpu_to_le32(count
*
1317 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1319 ret
= aac_build_sg(cmd
, &readcmd
->sg
);
1322 fibsize
= sizeof(struct aac_read
) +
1323 ((le32_to_cpu(readcmd
->sg
.count
) - 1) *
1324 sizeof (struct sgentry
));
1325 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1326 sizeof(struct aac_fibhdr
)));
1328 * Now send the Fib to the adapter
1330 return aac_fib_send(ContainerCommand
,
1335 (fib_callback
) io_callback
,
1339 static int aac_write_raw_io(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1341 struct aac_dev
*dev
= fib
->dev
;
1342 u16 fibsize
, command
;
1346 if ((dev
->comm_interface
== AAC_COMM_MESSAGE_TYPE2
||
1347 dev
->comm_interface
== AAC_COMM_MESSAGE_TYPE3
) &&
1349 struct aac_raw_io2
*writecmd2
;
1350 writecmd2
= (struct aac_raw_io2
*) fib_data(fib
);
1351 memset(writecmd2
, 0, sizeof(struct aac_raw_io2
));
1352 writecmd2
->blockLow
= cpu_to_le32((u32
)(lba
&0xffffffff));
1353 writecmd2
->blockHigh
= cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1354 writecmd2
->byteCount
= cpu_to_le32(count
*
1355 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1356 writecmd2
->cid
= cpu_to_le16(scmd_id(cmd
));
1357 writecmd2
->flags
= (fua
&& ((aac_cache
& 5) != 1) &&
1358 (((aac_cache
& 5) != 5) || !fib
->dev
->cache_protected
)) ?
1359 cpu_to_le16(RIO2_IO_TYPE_WRITE
|RIO2_IO_SUREWRITE
) :
1360 cpu_to_le16(RIO2_IO_TYPE_WRITE
);
1361 ret
= aac_build_sgraw2(cmd
, writecmd2
,
1362 dev
->scsi_host_ptr
->sg_tablesize
);
1365 command
= ContainerRawIo2
;
1366 fibsize
= sizeof(struct aac_raw_io2
) +
1367 ((le32_to_cpu(writecmd2
->sgeCnt
)-1) * sizeof(struct sge_ieee1212
));
1369 struct aac_raw_io
*writecmd
;
1370 writecmd
= (struct aac_raw_io
*) fib_data(fib
);
1371 writecmd
->block
[0] = cpu_to_le32((u32
)(lba
&0xffffffff));
1372 writecmd
->block
[1] = cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1373 writecmd
->count
= cpu_to_le32(count
*
1374 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1375 writecmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1376 writecmd
->flags
= (fua
&& ((aac_cache
& 5) != 1) &&
1377 (((aac_cache
& 5) != 5) || !fib
->dev
->cache_protected
)) ?
1378 cpu_to_le16(RIO_TYPE_WRITE
|RIO_SUREWRITE
) :
1379 cpu_to_le16(RIO_TYPE_WRITE
);
1380 writecmd
->bpTotal
= 0;
1381 writecmd
->bpComplete
= 0;
1382 ret
= aac_build_sgraw(cmd
, &writecmd
->sg
);
1385 command
= ContainerRawIo
;
1386 fibsize
= sizeof(struct aac_raw_io
) +
1387 ((le32_to_cpu(writecmd
->sg
.count
)-1) * sizeof (struct sgentryraw
));
1390 BUG_ON(fibsize
> (fib
->dev
->max_fib_size
- sizeof(struct aac_fibhdr
)));
1392 * Now send the Fib to the adapter
1394 return aac_fib_send(command
,
1399 (fib_callback
) io_callback
,
1403 static int aac_write_block64(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1406 struct aac_write64
*writecmd
;
1410 writecmd
= (struct aac_write64
*) fib_data(fib
);
1411 writecmd
->command
= cpu_to_le32(VM_CtHostWrite64
);
1412 writecmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1413 writecmd
->sector_count
= cpu_to_le16(count
);
1414 writecmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1416 writecmd
->flags
= 0;
1418 ret
= aac_build_sg64(cmd
, &writecmd
->sg
);
1421 fibsize
= sizeof(struct aac_write64
) +
1422 ((le32_to_cpu(writecmd
->sg
.count
) - 1) *
1423 sizeof (struct sgentry64
));
1424 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1425 sizeof(struct aac_fibhdr
)));
1427 * Now send the Fib to the adapter
1429 return aac_fib_send(ContainerCommand64
,
1434 (fib_callback
) io_callback
,
1438 static int aac_write_block(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1441 struct aac_write
*writecmd
;
1442 struct aac_dev
*dev
= fib
->dev
;
1446 writecmd
= (struct aac_write
*) fib_data(fib
);
1447 writecmd
->command
= cpu_to_le32(VM_CtBlockWrite
);
1448 writecmd
->cid
= cpu_to_le32(scmd_id(cmd
));
1449 writecmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1450 writecmd
->count
= cpu_to_le32(count
*
1451 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1452 writecmd
->sg
.count
= cpu_to_le32(1);
1453 /* ->stable is not used - it did mean which type of write */
1455 ret
= aac_build_sg(cmd
, &writecmd
->sg
);
1458 fibsize
= sizeof(struct aac_write
) +
1459 ((le32_to_cpu(writecmd
->sg
.count
) - 1) *
1460 sizeof (struct sgentry
));
1461 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1462 sizeof(struct aac_fibhdr
)));
1464 * Now send the Fib to the adapter
1466 return aac_fib_send(ContainerCommand
,
1471 (fib_callback
) io_callback
,
1475 static struct aac_srb
* aac_scsi_common(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1477 struct aac_srb
* srbcmd
;
1482 switch(cmd
->sc_data_direction
){
1486 case DMA_BIDIRECTIONAL
:
1487 flag
= SRB_DataIn
| SRB_DataOut
;
1489 case DMA_FROM_DEVICE
:
1493 default: /* shuts up some versions of gcc */
1494 flag
= SRB_NoDataXfer
;
1498 srbcmd
= (struct aac_srb
*) fib_data(fib
);
1499 srbcmd
->function
= cpu_to_le32(SRBF_ExecuteScsi
);
1500 srbcmd
->channel
= cpu_to_le32(aac_logical_to_phys(scmd_channel(cmd
)));
1501 srbcmd
->id
= cpu_to_le32(scmd_id(cmd
));
1502 srbcmd
->lun
= cpu_to_le32(cmd
->device
->lun
);
1503 srbcmd
->flags
= cpu_to_le32(flag
);
1504 timeout
= cmd
->request
->timeout
/HZ
;
1507 srbcmd
->timeout
= cpu_to_le32(timeout
); // timeout in seconds
1508 srbcmd
->retry_limit
= 0; /* Obsolete parameter */
1509 srbcmd
->cdb_size
= cpu_to_le32(cmd
->cmd_len
);
1513 static struct aac_hba_cmd_req
*aac_construct_hbacmd(struct fib
*fib
,
1514 struct scsi_cmnd
*cmd
)
1516 struct aac_hba_cmd_req
*hbacmd
;
1517 struct aac_dev
*dev
;
1521 dev
= (struct aac_dev
*)cmd
->device
->host
->hostdata
;
1523 hbacmd
= (struct aac_hba_cmd_req
*)fib
->hw_fib_va
;
1524 memset(hbacmd
, 0, 96); /* sizeof(*hbacmd) is not necessary */
1525 /* iu_type is a parameter of aac_hba_send */
1526 switch (cmd
->sc_data_direction
) {
1530 case DMA_FROM_DEVICE
:
1531 case DMA_BIDIRECTIONAL
:
1538 hbacmd
->lun
[1] = cpu_to_le32(cmd
->device
->lun
);
1540 bus
= aac_logical_to_phys(scmd_channel(cmd
));
1541 target
= scmd_id(cmd
);
1542 hbacmd
->it_nexus
= dev
->hba_map
[bus
][target
].rmw_nexus
;
1544 /* we fill in reply_qid later in aac_src_deliver_message */
1545 /* we fill in iu_type, request_id later in aac_hba_send */
1546 /* we fill in emb_data_desc_count later in aac_build_sghba */
1548 memcpy(hbacmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1549 hbacmd
->data_length
= cpu_to_le32(scsi_bufflen(cmd
));
1551 address
= (u64
)fib
->hw_error_pa
;
1552 hbacmd
->error_ptr_hi
= cpu_to_le32((u32
)(address
>> 32));
1553 hbacmd
->error_ptr_lo
= cpu_to_le32((u32
)(address
& 0xffffffff));
1554 hbacmd
->error_length
= cpu_to_le32(FW_ERROR_BUFFER_SIZE
);
1559 static void aac_srb_callback(void *context
, struct fib
* fibptr
);
1561 static int aac_scsi_64(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1564 struct aac_srb
* srbcmd
= aac_scsi_common(fib
, cmd
);
1567 ret
= aac_build_sg64(cmd
, (struct sgmap64
*) &srbcmd
->sg
);
1570 srbcmd
->count
= cpu_to_le32(scsi_bufflen(cmd
));
1572 memset(srbcmd
->cdb
, 0, sizeof(srbcmd
->cdb
));
1573 memcpy(srbcmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1575 * Build Scatter/Gather list
1577 fibsize
= sizeof (struct aac_srb
) - sizeof (struct sgentry
) +
1578 ((le32_to_cpu(srbcmd
->sg
.count
) & 0xff) *
1579 sizeof (struct sgentry64
));
1580 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1581 sizeof(struct aac_fibhdr
)));
1584 * Now send the Fib to the adapter
1586 return aac_fib_send(ScsiPortCommand64
, fib
,
1587 fibsize
, FsaNormal
, 0, 1,
1588 (fib_callback
) aac_srb_callback
,
1592 static int aac_scsi_32(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1595 struct aac_srb
* srbcmd
= aac_scsi_common(fib
, cmd
);
1598 ret
= aac_build_sg(cmd
, (struct sgmap
*)&srbcmd
->sg
);
1601 srbcmd
->count
= cpu_to_le32(scsi_bufflen(cmd
));
1603 memset(srbcmd
->cdb
, 0, sizeof(srbcmd
->cdb
));
1604 memcpy(srbcmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1606 * Build Scatter/Gather list
1608 fibsize
= sizeof (struct aac_srb
) +
1609 (((le32_to_cpu(srbcmd
->sg
.count
) & 0xff) - 1) *
1610 sizeof (struct sgentry
));
1611 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1612 sizeof(struct aac_fibhdr
)));
1615 * Now send the Fib to the adapter
1617 return aac_fib_send(ScsiPortCommand
, fib
, fibsize
, FsaNormal
, 0, 1,
1618 (fib_callback
) aac_srb_callback
, (void *) cmd
);
1621 static int aac_scsi_32_64(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1623 if ((sizeof(dma_addr_t
) > 4) && fib
->dev
->needs_dac
&&
1624 (fib
->dev
->adapter_info
.options
& AAC_OPT_SGMAP_HOST64
))
1626 return aac_scsi_32(fib
, cmd
);
1629 static int aac_adapter_hba(struct fib
*fib
, struct scsi_cmnd
*cmd
)
1631 struct aac_hba_cmd_req
*hbacmd
= aac_construct_hbacmd(fib
, cmd
);
1632 struct aac_dev
*dev
;
1635 dev
= (struct aac_dev
*)cmd
->device
->host
->hostdata
;
1637 ret
= aac_build_sghba(cmd
, hbacmd
,
1638 dev
->scsi_host_ptr
->sg_tablesize
, (u64
)fib
->hw_sgl_pa
);
1643 * Now send the HBA command to the adapter
1645 fib
->hbacmd_size
= 64 + le32_to_cpu(hbacmd
->emb_data_desc_count
) *
1646 sizeof(struct aac_hba_sgl
);
1648 return aac_hba_send(HBA_IU_TYPE_SCSI_CMD_REQ
, fib
,
1649 (fib_callback
) aac_hba_callback
,
1653 static int aac_send_safw_bmic_cmd(struct aac_dev
*dev
,
1654 struct aac_srb_unit
*srbu
, void *xfer_buf
, int xfer_len
)
1660 struct aac_srb
*srb
;
1661 struct aac_srb_reply
*srb_reply
;
1662 struct sgmap64
*sg64
;
1666 if (!dev
->sa_firmware
)
1670 fibptr
= aac_fib_alloc(dev
);
1674 aac_fib_init(fibptr
);
1675 fibptr
->hw_fib_va
->header
.XferState
&=
1676 ~cpu_to_le32(FastResponseCapable
);
1678 fibsize
= sizeof(struct aac_srb
) - sizeof(struct sgentry
) +
1679 sizeof(struct sgentry64
);
1681 /* allocate DMA buffer for response */
1682 addr
= dma_map_single(&dev
->pdev
->dev
, xfer_buf
, xfer_len
,
1684 if (dma_mapping_error(&dev
->pdev
->dev
, addr
)) {
1689 srb
= fib_data(fibptr
);
1690 memcpy(srb
, &srbu
->srb
, sizeof(struct aac_srb
));
1692 vbus
= (u32
)le16_to_cpu(
1693 dev
->supplement_adapter_info
.virt_device_bus
);
1694 vid
= (u32
)le16_to_cpu(
1695 dev
->supplement_adapter_info
.virt_device_target
);
1697 /* set the common request fields */
1698 srb
->channel
= cpu_to_le32(vbus
);
1699 srb
->id
= cpu_to_le32(vid
);
1701 srb
->function
= cpu_to_le32(SRBF_ExecuteScsi
);
1703 srb
->retry_limit
= 0;
1704 srb
->cdb_size
= cpu_to_le32(16);
1705 srb
->count
= cpu_to_le32(xfer_len
);
1707 sg64
= (struct sgmap64
*)&srb
->sg
;
1708 sg64
->count
= cpu_to_le32(1);
1709 sg64
->sg
[0].addr
[1] = cpu_to_le32(upper_32_bits(addr
));
1710 sg64
->sg
[0].addr
[0] = cpu_to_le32(lower_32_bits(addr
));
1711 sg64
->sg
[0].count
= cpu_to_le32(xfer_len
);
1714 * Copy the updated data for other dumping or other usage if needed
1716 memcpy(&srbu
->srb
, srb
, sizeof(struct aac_srb
));
1718 /* issue request to the controller */
1719 rcode
= aac_fib_send(ScsiPortCommand64
, fibptr
, fibsize
, FsaNormal
,
1722 if (rcode
== -ERESTARTSYS
)
1725 if (unlikely(rcode
< 0))
1728 srb_reply
= (struct aac_srb_reply
*)fib_data(fibptr
);
1729 memcpy(&srbu
->srb_reply
, srb_reply
, sizeof(struct aac_srb_reply
));
1732 dma_unmap_single(&dev
->pdev
->dev
, addr
, xfer_len
, DMA_BIDIRECTIONAL
);
1734 aac_fib_complete(fibptr
);
1735 aac_fib_free(fibptr
);
1739 static void aac_set_safw_target_qd(struct aac_dev
*dev
, int bus
, int target
)
1742 struct aac_ciss_identify_pd
*identify_resp
;
1744 if (dev
->hba_map
[bus
][target
].devtype
!= AAC_DEVTYPE_NATIVE_RAW
)
1747 identify_resp
= dev
->hba_map
[bus
][target
].safw_identify_resp
;
1748 if (identify_resp
== NULL
) {
1749 dev
->hba_map
[bus
][target
].qd_limit
= 32;
1753 if (identify_resp
->current_queue_depth_limit
<= 0 ||
1754 identify_resp
->current_queue_depth_limit
> 255)
1755 dev
->hba_map
[bus
][target
].qd_limit
= 32;
1757 dev
->hba_map
[bus
][target
].qd_limit
=
1758 identify_resp
->current_queue_depth_limit
;
1761 static int aac_issue_safw_bmic_identify(struct aac_dev
*dev
,
1762 struct aac_ciss_identify_pd
**identify_resp
, u32 bus
, u32 target
)
1764 int rcode
= -ENOMEM
;
1766 struct aac_srb_unit srbu
;
1767 struct aac_srb
*srbcmd
;
1768 struct aac_ciss_identify_pd
*identify_reply
;
1770 datasize
= sizeof(struct aac_ciss_identify_pd
);
1771 identify_reply
= kmalloc(datasize
, GFP_KERNEL
);
1772 if (!identify_reply
)
1775 memset(&srbu
, 0, sizeof(struct aac_srb_unit
));
1778 srbcmd
->flags
= cpu_to_le32(SRB_DataIn
);
1779 srbcmd
->cdb
[0] = 0x26;
1780 srbcmd
->cdb
[2] = (u8
)((AAC_MAX_LUN
+ target
) & 0x00FF);
1781 srbcmd
->cdb
[6] = CISS_IDENTIFY_PHYSICAL_DEVICE
;
1783 rcode
= aac_send_safw_bmic_cmd(dev
, &srbu
, identify_reply
, datasize
);
1784 if (unlikely(rcode
< 0))
1787 *identify_resp
= identify_reply
;
1792 kfree(identify_reply
);
1796 static inline void aac_free_safw_ciss_luns(struct aac_dev
*dev
)
1798 kfree(dev
->safw_phys_luns
);
1799 dev
->safw_phys_luns
= NULL
;
1803 * aac_get_safw_ciss_luns() Process topology change
1804 * @dev: aac_dev structure
1806 * Execute a CISS REPORT PHYS LUNS and process the results into
1807 * the current hba_map.
1809 static int aac_get_safw_ciss_luns(struct aac_dev
*dev
)
1811 int rcode
= -ENOMEM
;
1813 struct aac_srb
*srbcmd
;
1814 struct aac_srb_unit srbu
;
1815 struct aac_ciss_phys_luns_resp
*phys_luns
;
1817 datasize
= sizeof(struct aac_ciss_phys_luns_resp
) +
1818 (AAC_MAX_TARGETS
- 1) * sizeof(struct _ciss_lun
);
1819 phys_luns
= kmalloc(datasize
, GFP_KERNEL
);
1820 if (phys_luns
== NULL
)
1823 memset(&srbu
, 0, sizeof(struct aac_srb_unit
));
1826 srbcmd
->flags
= cpu_to_le32(SRB_DataIn
);
1827 srbcmd
->cdb
[0] = CISS_REPORT_PHYSICAL_LUNS
;
1828 srbcmd
->cdb
[1] = 2; /* extended reporting */
1829 srbcmd
->cdb
[8] = (u8
)(datasize
>> 8);
1830 srbcmd
->cdb
[9] = (u8
)(datasize
);
1832 rcode
= aac_send_safw_bmic_cmd(dev
, &srbu
, phys_luns
, datasize
);
1833 if (unlikely(rcode
< 0))
1836 if (phys_luns
->resp_flag
!= 2) {
1841 dev
->safw_phys_luns
= phys_luns
;
1850 static inline u32
aac_get_safw_phys_lun_count(struct aac_dev
*dev
)
1852 return get_unaligned_be32(&dev
->safw_phys_luns
->list_length
[0])/24;
1855 static inline u32
aac_get_safw_phys_bus(struct aac_dev
*dev
, int lun
)
1857 return dev
->safw_phys_luns
->lun
[lun
].level2
[1] & 0x3f;
1860 static inline u32
aac_get_safw_phys_target(struct aac_dev
*dev
, int lun
)
1862 return dev
->safw_phys_luns
->lun
[lun
].level2
[0];
1865 static inline u32
aac_get_safw_phys_expose_flag(struct aac_dev
*dev
, int lun
)
1867 return dev
->safw_phys_luns
->lun
[lun
].bus
>> 6;
1870 static inline u32
aac_get_safw_phys_attribs(struct aac_dev
*dev
, int lun
)
1872 return dev
->safw_phys_luns
->lun
[lun
].node_ident
[9];
1875 static inline u32
aac_get_safw_phys_nexus(struct aac_dev
*dev
, int lun
)
1877 return *((u32
*)&dev
->safw_phys_luns
->lun
[lun
].node_ident
[12]);
1880 static inline u32
aac_get_safw_phys_device_type(struct aac_dev
*dev
, int lun
)
1882 return dev
->safw_phys_luns
->lun
[lun
].node_ident
[8];
1885 static inline void aac_free_safw_identify_resp(struct aac_dev
*dev
,
1886 int bus
, int target
)
1888 kfree(dev
->hba_map
[bus
][target
].safw_identify_resp
);
1889 dev
->hba_map
[bus
][target
].safw_identify_resp
= NULL
;
1892 static inline void aac_free_safw_all_identify_resp(struct aac_dev
*dev
,
1900 luns
= aac_get_safw_phys_lun_count(dev
);
1902 if (luns
< lun_count
)
1904 else if (lun_count
< 0)
1907 for (i
= 0; i
< lun_count
; i
++) {
1908 bus
= aac_get_safw_phys_bus(dev
, i
);
1909 target
= aac_get_safw_phys_target(dev
, i
);
1911 aac_free_safw_identify_resp(dev
, bus
, target
);
1915 static int aac_get_safw_attr_all_targets(struct aac_dev
*dev
)
1922 struct aac_ciss_identify_pd
*identify_resp
= NULL
;
1924 lun_count
= aac_get_safw_phys_lun_count(dev
);
1926 for (i
= 0; i
< lun_count
; ++i
) {
1928 bus
= aac_get_safw_phys_bus(dev
, i
);
1929 target
= aac_get_safw_phys_target(dev
, i
);
1931 rcode
= aac_issue_safw_bmic_identify(dev
,
1932 &identify_resp
, bus
, target
);
1934 if (unlikely(rcode
< 0))
1935 goto free_identify_resp
;
1937 dev
->hba_map
[bus
][target
].safw_identify_resp
= identify_resp
;
1943 aac_free_safw_all_identify_resp(dev
, i
);
1948 * aac_set_safw_attr_all_targets- update current hba map with data from FW
1949 * @dev: aac_dev structure
1950 * @phys_luns: FW information from report phys luns
1951 * @rescan: Indicates scan type
1953 * Update our hba map with the information gathered from the FW
1955 static void aac_set_safw_attr_all_targets(struct aac_dev
*dev
)
1957 /* ok and extended reporting */
1958 u32 lun_count
, nexus
;
1960 u8 expose_flag
, attribs
;
1962 lun_count
= aac_get_safw_phys_lun_count(dev
);
1964 dev
->scan_counter
++;
1966 for (i
= 0; i
< lun_count
; ++i
) {
1968 bus
= aac_get_safw_phys_bus(dev
, i
);
1969 target
= aac_get_safw_phys_target(dev
, i
);
1970 expose_flag
= aac_get_safw_phys_expose_flag(dev
, i
);
1971 attribs
= aac_get_safw_phys_attribs(dev
, i
);
1972 nexus
= aac_get_safw_phys_nexus(dev
, i
);
1974 if (bus
>= AAC_MAX_BUSES
|| target
>= AAC_MAX_TARGETS
)
1977 if (expose_flag
!= 0) {
1978 dev
->hba_map
[bus
][target
].devtype
=
1979 AAC_DEVTYPE_RAID_MEMBER
;
1983 if (nexus
!= 0 && (attribs
& 8)) {
1984 dev
->hba_map
[bus
][target
].devtype
=
1985 AAC_DEVTYPE_NATIVE_RAW
;
1986 dev
->hba_map
[bus
][target
].rmw_nexus
=
1989 dev
->hba_map
[bus
][target
].devtype
=
1990 AAC_DEVTYPE_ARC_RAW
;
1992 dev
->hba_map
[bus
][target
].scan_counter
= dev
->scan_counter
;
1994 aac_set_safw_target_qd(dev
, bus
, target
);
1998 static int aac_setup_safw_targets(struct aac_dev
*dev
)
2002 rcode
= aac_get_containers(dev
);
2003 if (unlikely(rcode
< 0))
2006 rcode
= aac_get_safw_ciss_luns(dev
);
2007 if (unlikely(rcode
< 0))
2010 rcode
= aac_get_safw_attr_all_targets(dev
);
2011 if (unlikely(rcode
< 0))
2012 goto free_ciss_luns
;
2014 aac_set_safw_attr_all_targets(dev
);
2016 aac_free_safw_all_identify_resp(dev
, -1);
2018 aac_free_safw_ciss_luns(dev
);
2023 int aac_setup_safw_adapter(struct aac_dev
*dev
)
2025 return aac_setup_safw_targets(dev
);
2028 int aac_get_adapter_info(struct aac_dev
* dev
)
2032 u32 tmp
, bus
, target
;
2033 struct aac_adapter_info
*info
;
2034 struct aac_bus_info
*command
;
2035 struct aac_bus_info_response
*bus_info
;
2037 if (!(fibptr
= aac_fib_alloc(dev
)))
2040 aac_fib_init(fibptr
);
2041 info
= (struct aac_adapter_info
*) fib_data(fibptr
);
2042 memset(info
,0,sizeof(*info
));
2044 rcode
= aac_fib_send(RequestAdapterInfo
,
2048 -1, 1, /* First `interrupt' command uses special wait */
2053 /* FIB should be freed only after
2054 * getting the response from the F/W */
2055 if (rcode
!= -ERESTARTSYS
) {
2056 aac_fib_complete(fibptr
);
2057 aac_fib_free(fibptr
);
2061 memcpy(&dev
->adapter_info
, info
, sizeof(*info
));
2063 dev
->supplement_adapter_info
.virt_device_bus
= 0xffff;
2064 if (dev
->adapter_info
.options
& AAC_OPT_SUPPLEMENT_ADAPTER_INFO
) {
2065 struct aac_supplement_adapter_info
* sinfo
;
2067 aac_fib_init(fibptr
);
2069 sinfo
= (struct aac_supplement_adapter_info
*) fib_data(fibptr
);
2071 memset(sinfo
,0,sizeof(*sinfo
));
2073 rcode
= aac_fib_send(RequestSupplementAdapterInfo
,
2082 memcpy(&dev
->supplement_adapter_info
, sinfo
, sizeof(*sinfo
));
2083 if (rcode
== -ERESTARTSYS
) {
2084 fibptr
= aac_fib_alloc(dev
);
2091 /* reset all previous mapped devices (i.e. for init. after IOP_RESET) */
2092 for (bus
= 0; bus
< AAC_MAX_BUSES
; bus
++) {
2093 for (target
= 0; target
< AAC_MAX_TARGETS
; target
++) {
2094 dev
->hba_map
[bus
][target
].devtype
= 0;
2095 dev
->hba_map
[bus
][target
].qd_limit
= 0;
2103 aac_fib_init(fibptr
);
2105 bus_info
= (struct aac_bus_info_response
*) fib_data(fibptr
);
2107 memset(bus_info
, 0, sizeof(*bus_info
));
2109 command
= (struct aac_bus_info
*)bus_info
;
2111 command
->Command
= cpu_to_le32(VM_Ioctl
);
2112 command
->ObjType
= cpu_to_le32(FT_DRIVE
);
2113 command
->MethodId
= cpu_to_le32(1);
2114 command
->CtlCmd
= cpu_to_le32(GetBusInfo
);
2116 rcode
= aac_fib_send(ContainerCommand
,
2123 /* reasoned default */
2124 dev
->maximum_num_physicals
= 16;
2125 if (rcode
>= 0 && le32_to_cpu(bus_info
->Status
) == ST_OK
) {
2126 dev
->maximum_num_physicals
= le32_to_cpu(bus_info
->TargetsPerBus
);
2127 dev
->maximum_num_channels
= le32_to_cpu(bus_info
->BusCount
);
2130 if (!dev
->in_reset
) {
2132 tmp
= le32_to_cpu(dev
->adapter_info
.kernelrev
);
2133 printk(KERN_INFO
"%s%d: kernel %d.%d-%d[%d] %.*s\n",
2139 le32_to_cpu(dev
->adapter_info
.kernelbuild
),
2140 (int)sizeof(dev
->supplement_adapter_info
.build_date
),
2141 dev
->supplement_adapter_info
.build_date
);
2142 tmp
= le32_to_cpu(dev
->adapter_info
.monitorrev
);
2143 printk(KERN_INFO
"%s%d: monitor %d.%d-%d[%d]\n",
2145 tmp
>>24,(tmp
>>16)&0xff,tmp
&0xff,
2146 le32_to_cpu(dev
->adapter_info
.monitorbuild
));
2147 tmp
= le32_to_cpu(dev
->adapter_info
.biosrev
);
2148 printk(KERN_INFO
"%s%d: bios %d.%d-%d[%d]\n",
2150 tmp
>>24,(tmp
>>16)&0xff,tmp
&0xff,
2151 le32_to_cpu(dev
->adapter_info
.biosbuild
));
2153 if (aac_get_serial_number(
2154 shost_to_class(dev
->scsi_host_ptr
), buffer
))
2155 printk(KERN_INFO
"%s%d: serial %s",
2156 dev
->name
, dev
->id
, buffer
);
2157 if (dev
->supplement_adapter_info
.vpd_info
.tsid
[0]) {
2158 printk(KERN_INFO
"%s%d: TSID %.*s\n",
2160 (int)sizeof(dev
->supplement_adapter_info
2162 dev
->supplement_adapter_info
.vpd_info
.tsid
);
2164 if (!aac_check_reset
|| ((aac_check_reset
== 1) &&
2165 (dev
->supplement_adapter_info
.supported_options2
&
2166 AAC_OPTION_IGNORE_RESET
))) {
2167 printk(KERN_INFO
"%s%d: Reset Adapter Ignored\n",
2168 dev
->name
, dev
->id
);
2172 dev
->cache_protected
= 0;
2173 dev
->jbod
= ((dev
->supplement_adapter_info
.feature_bits
&
2174 AAC_FEATURE_JBOD
) != 0);
2175 dev
->nondasd_support
= 0;
2176 dev
->raid_scsi_mode
= 0;
2177 if(dev
->adapter_info
.options
& AAC_OPT_NONDASD
)
2178 dev
->nondasd_support
= 1;
2181 * If the firmware supports ROMB RAID/SCSI mode and we are currently
2182 * in RAID/SCSI mode, set the flag. For now if in this mode we will
2183 * force nondasd support on. If we decide to allow the non-dasd flag
2184 * additional changes changes will have to be made to support
2185 * RAID/SCSI. the function aac_scsi_cmd in this module will have to be
2186 * changed to support the new dev->raid_scsi_mode flag instead of
2187 * leaching off of the dev->nondasd_support flag. Also in linit.c the
2188 * function aac_detect will have to be modified where it sets up the
2189 * max number of channels based on the aac->nondasd_support flag only.
2191 if ((dev
->adapter_info
.options
& AAC_OPT_SCSI_MANAGED
) &&
2192 (dev
->adapter_info
.options
& AAC_OPT_RAID_SCSI_MODE
)) {
2193 dev
->nondasd_support
= 1;
2194 dev
->raid_scsi_mode
= 1;
2196 if (dev
->raid_scsi_mode
!= 0)
2197 printk(KERN_INFO
"%s%d: ROMB RAID/SCSI mode enabled\n",
2198 dev
->name
, dev
->id
);
2201 dev
->nondasd_support
= (nondasd
!=0);
2202 if (dev
->nondasd_support
&& !dev
->in_reset
)
2203 printk(KERN_INFO
"%s%d: Non-DASD support enabled.\n",dev
->name
, dev
->id
);
2205 if (dma_get_required_mask(&dev
->pdev
->dev
) > DMA_BIT_MASK(32))
2207 dev
->dac_support
= 0;
2208 if ((sizeof(dma_addr_t
) > 4) && dev
->needs_dac
&&
2209 (dev
->adapter_info
.options
& AAC_OPT_SGMAP_HOST64
)) {
2211 printk(KERN_INFO
"%s%d: 64bit support enabled.\n",
2212 dev
->name
, dev
->id
);
2213 dev
->dac_support
= 1;
2217 dev
->dac_support
= (dacmode
!=0);
2220 /* avoid problems with AAC_QUIRK_SCSI_32 controllers */
2221 if (dev
->dac_support
&& (aac_get_driver_ident(dev
->cardtype
)->quirks
2222 & AAC_QUIRK_SCSI_32
)) {
2223 dev
->nondasd_support
= 0;
2225 expose_physicals
= 0;
2228 if (dev
->dac_support
) {
2229 if (!pci_set_dma_mask(dev
->pdev
, DMA_BIT_MASK(64))) {
2231 dev_info(&dev
->pdev
->dev
, "64 Bit DAC enabled\n");
2232 } else if (!pci_set_dma_mask(dev
->pdev
, DMA_BIT_MASK(32))) {
2233 dev_info(&dev
->pdev
->dev
, "DMA mask set failed, 64 Bit DAC disabled\n");
2234 dev
->dac_support
= 0;
2236 dev_info(&dev
->pdev
->dev
, "No suitable DMA available\n");
2241 * Deal with configuring for the individualized limits of each packet
2244 dev
->a_ops
.adapter_scsi
= (dev
->dac_support
)
2245 ? ((aac_get_driver_ident(dev
->cardtype
)->quirks
& AAC_QUIRK_SCSI_32
)
2249 if (dev
->raw_io_interface
) {
2250 dev
->a_ops
.adapter_bounds
= (dev
->raw_io_64
)
2253 dev
->a_ops
.adapter_read
= aac_read_raw_io
;
2254 dev
->a_ops
.adapter_write
= aac_write_raw_io
;
2256 dev
->a_ops
.adapter_bounds
= aac_bounds_32
;
2257 dev
->scsi_host_ptr
->sg_tablesize
= (dev
->max_fib_size
-
2258 sizeof(struct aac_fibhdr
) -
2259 sizeof(struct aac_write
) + sizeof(struct sgentry
)) /
2260 sizeof(struct sgentry
);
2261 if (dev
->dac_support
) {
2262 dev
->a_ops
.adapter_read
= aac_read_block64
;
2263 dev
->a_ops
.adapter_write
= aac_write_block64
;
2265 * 38 scatter gather elements
2267 dev
->scsi_host_ptr
->sg_tablesize
=
2268 (dev
->max_fib_size
-
2269 sizeof(struct aac_fibhdr
) -
2270 sizeof(struct aac_write64
) +
2271 sizeof(struct sgentry64
)) /
2272 sizeof(struct sgentry64
);
2274 dev
->a_ops
.adapter_read
= aac_read_block
;
2275 dev
->a_ops
.adapter_write
= aac_write_block
;
2277 dev
->scsi_host_ptr
->max_sectors
= AAC_MAX_32BIT_SGBCOUNT
;
2278 if (!(dev
->adapter_info
.options
& AAC_OPT_NEW_COMM
)) {
2280 * Worst case size that could cause sg overflow when
2281 * we break up SG elements that are larger than 64KB.
2282 * Would be nice if we could tell the SCSI layer what
2283 * the maximum SG element size can be. Worst case is
2284 * (sg_tablesize-1) 4KB elements with one 64KB
2286 * 32bit -> 468 or 238KB 64bit -> 424 or 212KB
2288 dev
->scsi_host_ptr
->max_sectors
=
2289 (dev
->scsi_host_ptr
->sg_tablesize
* 8) + 112;
2292 if (!dev
->sync_mode
&& dev
->sa_firmware
&&
2293 dev
->scsi_host_ptr
->sg_tablesize
> HBA_MAX_SG_SEPARATE
)
2294 dev
->scsi_host_ptr
->sg_tablesize
= dev
->sg_tablesize
=
2295 HBA_MAX_SG_SEPARATE
;
2297 /* FIB should be freed only after getting the response from the F/W */
2298 if (rcode
!= -ERESTARTSYS
) {
2299 aac_fib_complete(fibptr
);
2300 aac_fib_free(fibptr
);
2307 static void io_callback(void *context
, struct fib
* fibptr
)
2309 struct aac_dev
*dev
;
2310 struct aac_read_reply
*readreply
;
2311 struct scsi_cmnd
*scsicmd
;
2314 scsicmd
= (struct scsi_cmnd
*) context
;
2316 if (!aac_valid_context(scsicmd
, fibptr
))
2320 cid
= scmd_id(scsicmd
);
2322 if (nblank(dprintk(x
))) {
2324 switch (scsicmd
->cmnd
[0]) {
2327 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) |
2328 (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
2332 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
2333 ((u64
)scsicmd
->cmnd
[3] << 48) |
2334 ((u64
)scsicmd
->cmnd
[4] << 40) |
2335 ((u64
)scsicmd
->cmnd
[5] << 32) |
2336 ((u64
)scsicmd
->cmnd
[6] << 24) |
2337 (scsicmd
->cmnd
[7] << 16) |
2338 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2342 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
2343 (scsicmd
->cmnd
[3] << 16) |
2344 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2347 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
2348 (scsicmd
->cmnd
[3] << 16) |
2349 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2353 "io_callback[cpu %d]: lba = %llu, t = %ld.\n",
2354 smp_processor_id(), (unsigned long long)lba
, jiffies
);
2357 BUG_ON(fibptr
== NULL
);
2359 scsi_dma_unmap(scsicmd
);
2361 readreply
= (struct aac_read_reply
*)fib_data(fibptr
);
2362 switch (le32_to_cpu(readreply
->status
)) {
2364 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2366 dev
->fsa_dev
[cid
].sense_data
.sense_key
= NO_SENSE
;
2369 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2370 SAM_STAT_CHECK_CONDITION
;
2371 set_sense(&dev
->fsa_dev
[cid
].sense_data
, NOT_READY
,
2372 SENCODE_BECOMING_READY
, ASENCODE_BECOMING_READY
, 0, 0);
2373 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2374 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2375 SCSI_SENSE_BUFFERSIZE
));
2378 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2379 SAM_STAT_CHECK_CONDITION
;
2380 set_sense(&dev
->fsa_dev
[cid
].sense_data
, MEDIUM_ERROR
,
2381 SENCODE_UNRECOVERED_READ_ERROR
, ASENCODE_NO_SENSE
, 0, 0);
2382 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2383 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2384 SCSI_SENSE_BUFFERSIZE
));
2387 #ifdef AAC_DETAILED_STATUS_INFO
2388 printk(KERN_WARNING
"io_callback: io failed, status = %d\n",
2389 le32_to_cpu(readreply
->status
));
2391 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2392 SAM_STAT_CHECK_CONDITION
;
2393 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2394 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
2395 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
2396 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2397 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2398 SCSI_SENSE_BUFFERSIZE
));
2401 aac_fib_complete(fibptr
);
2403 scsicmd
->scsi_done(scsicmd
);
2406 static int aac_read(struct scsi_cmnd
* scsicmd
)
2411 struct aac_dev
*dev
;
2412 struct fib
* cmd_fibcontext
;
2415 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2417 * Get block address and transfer length
2419 switch (scsicmd
->cmnd
[0]) {
2421 dprintk((KERN_DEBUG
"aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd
)));
2423 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) |
2424 (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
2425 count
= scsicmd
->cmnd
[4];
2431 dprintk((KERN_DEBUG
"aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd
)));
2433 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
2434 ((u64
)scsicmd
->cmnd
[3] << 48) |
2435 ((u64
)scsicmd
->cmnd
[4] << 40) |
2436 ((u64
)scsicmd
->cmnd
[5] << 32) |
2437 ((u64
)scsicmd
->cmnd
[6] << 24) |
2438 (scsicmd
->cmnd
[7] << 16) |
2439 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2440 count
= (scsicmd
->cmnd
[10] << 24) |
2441 (scsicmd
->cmnd
[11] << 16) |
2442 (scsicmd
->cmnd
[12] << 8) | scsicmd
->cmnd
[13];
2445 dprintk((KERN_DEBUG
"aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd
)));
2447 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
2448 (scsicmd
->cmnd
[3] << 16) |
2449 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2450 count
= (scsicmd
->cmnd
[6] << 24) |
2451 (scsicmd
->cmnd
[7] << 16) |
2452 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2455 dprintk((KERN_DEBUG
"aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd
)));
2457 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
2458 (scsicmd
->cmnd
[3] << 16) |
2459 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2460 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
2464 if ((lba
+ count
) > (dev
->fsa_dev
[scmd_id(scsicmd
)].size
)) {
2465 cid
= scmd_id(scsicmd
);
2466 dprintk((KERN_DEBUG
"aacraid: Illegal lba\n"));
2467 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2468 SAM_STAT_CHECK_CONDITION
;
2469 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2470 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
2471 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
2472 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2473 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2474 SCSI_SENSE_BUFFERSIZE
));
2475 scsicmd
->scsi_done(scsicmd
);
2479 dprintk((KERN_DEBUG
"aac_read[cpu %d]: lba = %llu, t = %ld.\n",
2480 smp_processor_id(), (unsigned long long)lba
, jiffies
));
2481 if (aac_adapter_bounds(dev
,scsicmd
,lba
))
2484 * Alocate and initialize a Fib
2486 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
2487 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
2488 status
= aac_adapter_read(cmd_fibcontext
, scsicmd
, lba
, count
);
2491 * Check that the command queued to the controller
2493 if (status
== -EINPROGRESS
)
2496 printk(KERN_WARNING
"aac_read: aac_fib_send failed with status: %d.\n", status
);
2498 * For some reason, the Fib didn't queue, return QUEUE_FULL
2500 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_TASK_SET_FULL
;
2501 scsicmd
->scsi_done(scsicmd
);
2502 aac_fib_complete(cmd_fibcontext
);
2503 aac_fib_free(cmd_fibcontext
);
2507 static int aac_write(struct scsi_cmnd
* scsicmd
)
2513 struct aac_dev
*dev
;
2514 struct fib
* cmd_fibcontext
;
2517 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2519 * Get block address and transfer length
2521 if (scsicmd
->cmnd
[0] == WRITE_6
) /* 6 byte command */
2523 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) | (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
2524 count
= scsicmd
->cmnd
[4];
2528 } else if (scsicmd
->cmnd
[0] == WRITE_16
) { /* 16 byte command */
2529 dprintk((KERN_DEBUG
"aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd
)));
2531 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
2532 ((u64
)scsicmd
->cmnd
[3] << 48) |
2533 ((u64
)scsicmd
->cmnd
[4] << 40) |
2534 ((u64
)scsicmd
->cmnd
[5] << 32) |
2535 ((u64
)scsicmd
->cmnd
[6] << 24) |
2536 (scsicmd
->cmnd
[7] << 16) |
2537 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2538 count
= (scsicmd
->cmnd
[10] << 24) | (scsicmd
->cmnd
[11] << 16) |
2539 (scsicmd
->cmnd
[12] << 8) | scsicmd
->cmnd
[13];
2540 fua
= scsicmd
->cmnd
[1] & 0x8;
2541 } else if (scsicmd
->cmnd
[0] == WRITE_12
) { /* 12 byte command */
2542 dprintk((KERN_DEBUG
"aachba: received a write(12) command on id %d.\n", scmd_id(scsicmd
)));
2544 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16)
2545 | (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2546 count
= (scsicmd
->cmnd
[6] << 24) | (scsicmd
->cmnd
[7] << 16)
2547 | (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2548 fua
= scsicmd
->cmnd
[1] & 0x8;
2550 dprintk((KERN_DEBUG
"aachba: received a write(10) command on id %d.\n", scmd_id(scsicmd
)));
2551 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16) | (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2552 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
2553 fua
= scsicmd
->cmnd
[1] & 0x8;
2556 if ((lba
+ count
) > (dev
->fsa_dev
[scmd_id(scsicmd
)].size
)) {
2557 cid
= scmd_id(scsicmd
);
2558 dprintk((KERN_DEBUG
"aacraid: Illegal lba\n"));
2559 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2560 SAM_STAT_CHECK_CONDITION
;
2561 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2562 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
2563 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
2564 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2565 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2566 SCSI_SENSE_BUFFERSIZE
));
2567 scsicmd
->scsi_done(scsicmd
);
2571 dprintk((KERN_DEBUG
"aac_write[cpu %d]: lba = %llu, t = %ld.\n",
2572 smp_processor_id(), (unsigned long long)lba
, jiffies
));
2573 if (aac_adapter_bounds(dev
,scsicmd
,lba
))
2576 * Allocate and initialize a Fib then setup a BlockWrite command
2578 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
2579 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
2580 status
= aac_adapter_write(cmd_fibcontext
, scsicmd
, lba
, count
, fua
);
2583 * Check that the command queued to the controller
2585 if (status
== -EINPROGRESS
)
2588 printk(KERN_WARNING
"aac_write: aac_fib_send failed with status: %d\n", status
);
2590 * For some reason, the Fib didn't queue, return QUEUE_FULL
2592 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_TASK_SET_FULL
;
2593 scsicmd
->scsi_done(scsicmd
);
2595 aac_fib_complete(cmd_fibcontext
);
2596 aac_fib_free(cmd_fibcontext
);
2600 static void synchronize_callback(void *context
, struct fib
*fibptr
)
2602 struct aac_synchronize_reply
*synchronizereply
;
2603 struct scsi_cmnd
*cmd
;
2607 if (!aac_valid_context(cmd
, fibptr
))
2610 dprintk((KERN_DEBUG
"synchronize_callback[cpu %d]: t = %ld.\n",
2611 smp_processor_id(), jiffies
));
2612 BUG_ON(fibptr
== NULL
);
2615 synchronizereply
= fib_data(fibptr
);
2616 if (le32_to_cpu(synchronizereply
->status
) == CT_OK
)
2617 cmd
->result
= DID_OK
<< 16 |
2618 COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2620 struct scsi_device
*sdev
= cmd
->device
;
2621 struct aac_dev
*dev
= fibptr
->dev
;
2622 u32 cid
= sdev_id(sdev
);
2624 "synchronize_callback: synchronize failed, status = %d\n",
2625 le32_to_cpu(synchronizereply
->status
));
2626 cmd
->result
= DID_OK
<< 16 |
2627 COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
2628 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2629 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
2630 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
2631 memcpy(cmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2632 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2633 SCSI_SENSE_BUFFERSIZE
));
2636 aac_fib_complete(fibptr
);
2637 aac_fib_free(fibptr
);
2638 cmd
->scsi_done(cmd
);
2641 static int aac_synchronize(struct scsi_cmnd
*scsicmd
)
2644 struct fib
*cmd_fibcontext
;
2645 struct aac_synchronize
*synchronizecmd
;
2646 struct scsi_cmnd
*cmd
;
2647 struct scsi_device
*sdev
= scsicmd
->device
;
2649 struct aac_dev
*aac
;
2650 u64 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16) |
2651 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2652 u32 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
2653 unsigned long flags
;
2656 * Wait for all outstanding queued commands to complete to this
2657 * specific target (block).
2659 spin_lock_irqsave(&sdev
->list_lock
, flags
);
2660 list_for_each_entry(cmd
, &sdev
->cmd_list
, list
)
2661 if (cmd
->SCp
.phase
== AAC_OWNER_FIRMWARE
) {
2665 if (cmd
->cmnd
[0] == WRITE_6
) {
2666 cmnd_lba
= ((cmd
->cmnd
[1] & 0x1F) << 16) |
2667 (cmd
->cmnd
[2] << 8) |
2669 cmnd_count
= cmd
->cmnd
[4];
2670 if (cmnd_count
== 0)
2672 } else if (cmd
->cmnd
[0] == WRITE_16
) {
2673 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 56) |
2674 ((u64
)cmd
->cmnd
[3] << 48) |
2675 ((u64
)cmd
->cmnd
[4] << 40) |
2676 ((u64
)cmd
->cmnd
[5] << 32) |
2677 ((u64
)cmd
->cmnd
[6] << 24) |
2678 (cmd
->cmnd
[7] << 16) |
2679 (cmd
->cmnd
[8] << 8) |
2681 cmnd_count
= (cmd
->cmnd
[10] << 24) |
2682 (cmd
->cmnd
[11] << 16) |
2683 (cmd
->cmnd
[12] << 8) |
2685 } else if (cmd
->cmnd
[0] == WRITE_12
) {
2686 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 24) |
2687 (cmd
->cmnd
[3] << 16) |
2688 (cmd
->cmnd
[4] << 8) |
2690 cmnd_count
= (cmd
->cmnd
[6] << 24) |
2691 (cmd
->cmnd
[7] << 16) |
2692 (cmd
->cmnd
[8] << 8) |
2694 } else if (cmd
->cmnd
[0] == WRITE_10
) {
2695 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 24) |
2696 (cmd
->cmnd
[3] << 16) |
2697 (cmd
->cmnd
[4] << 8) |
2699 cmnd_count
= (cmd
->cmnd
[7] << 8) |
2703 if (((cmnd_lba
+ cmnd_count
) < lba
) ||
2704 (count
&& ((lba
+ count
) < cmnd_lba
)))
2710 spin_unlock_irqrestore(&sdev
->list_lock
, flags
);
2713 * Yield the processor (requeue for later)
2716 return SCSI_MLQUEUE_DEVICE_BUSY
;
2718 aac
= (struct aac_dev
*)sdev
->host
->hostdata
;
2720 return SCSI_MLQUEUE_HOST_BUSY
;
2723 * Allocate and initialize a Fib
2725 if (!(cmd_fibcontext
= aac_fib_alloc(aac
)))
2726 return SCSI_MLQUEUE_HOST_BUSY
;
2728 aac_fib_init(cmd_fibcontext
);
2730 synchronizecmd
= fib_data(cmd_fibcontext
);
2731 synchronizecmd
->command
= cpu_to_le32(VM_ContainerConfig
);
2732 synchronizecmd
->type
= cpu_to_le32(CT_FLUSH_CACHE
);
2733 synchronizecmd
->cid
= cpu_to_le32(scmd_id(scsicmd
));
2734 synchronizecmd
->count
=
2735 cpu_to_le32(sizeof(((struct aac_synchronize_reply
*)NULL
)->data
));
2736 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
2739 * Now send the Fib to the adapter
2741 status
= aac_fib_send(ContainerCommand
,
2743 sizeof(struct aac_synchronize
),
2746 (fib_callback
)synchronize_callback
,
2750 * Check that the command queued to the controller
2752 if (status
== -EINPROGRESS
)
2756 "aac_synchronize: aac_fib_send failed with status: %d.\n", status
);
2757 aac_fib_complete(cmd_fibcontext
);
2758 aac_fib_free(cmd_fibcontext
);
2759 return SCSI_MLQUEUE_HOST_BUSY
;
2762 static void aac_start_stop_callback(void *context
, struct fib
*fibptr
)
2764 struct scsi_cmnd
*scsicmd
= context
;
2766 if (!aac_valid_context(scsicmd
, fibptr
))
2769 BUG_ON(fibptr
== NULL
);
2771 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2773 aac_fib_complete(fibptr
);
2774 aac_fib_free(fibptr
);
2775 scsicmd
->scsi_done(scsicmd
);
2778 static int aac_start_stop(struct scsi_cmnd
*scsicmd
)
2781 struct fib
*cmd_fibcontext
;
2782 struct aac_power_management
*pmcmd
;
2783 struct scsi_device
*sdev
= scsicmd
->device
;
2784 struct aac_dev
*aac
= (struct aac_dev
*)sdev
->host
->hostdata
;
2786 if (!(aac
->supplement_adapter_info
.supported_options2
&
2787 AAC_OPTION_POWER_MANAGEMENT
)) {
2788 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2790 scsicmd
->scsi_done(scsicmd
);
2795 return SCSI_MLQUEUE_HOST_BUSY
;
2798 * Allocate and initialize a Fib
2800 cmd_fibcontext
= aac_fib_alloc_tag(aac
, scsicmd
);
2802 aac_fib_init(cmd_fibcontext
);
2804 pmcmd
= fib_data(cmd_fibcontext
);
2805 pmcmd
->command
= cpu_to_le32(VM_ContainerConfig
);
2806 pmcmd
->type
= cpu_to_le32(CT_POWER_MANAGEMENT
);
2807 /* Eject bit ignored, not relevant */
2808 pmcmd
->sub
= (scsicmd
->cmnd
[4] & 1) ?
2809 cpu_to_le32(CT_PM_START_UNIT
) : cpu_to_le32(CT_PM_STOP_UNIT
);
2810 pmcmd
->cid
= cpu_to_le32(sdev_id(sdev
));
2811 pmcmd
->parm
= (scsicmd
->cmnd
[1] & 1) ?
2812 cpu_to_le32(CT_PM_UNIT_IMMEDIATE
) : 0;
2813 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
2816 * Now send the Fib to the adapter
2818 status
= aac_fib_send(ContainerCommand
,
2820 sizeof(struct aac_power_management
),
2823 (fib_callback
)aac_start_stop_callback
,
2827 * Check that the command queued to the controller
2829 if (status
== -EINPROGRESS
)
2832 aac_fib_complete(cmd_fibcontext
);
2833 aac_fib_free(cmd_fibcontext
);
2834 return SCSI_MLQUEUE_HOST_BUSY
;
2838 * aac_scsi_cmd() - Process SCSI command
2839 * @scsicmd: SCSI command block
2841 * Emulate a SCSI command and queue the required request for the
2845 int aac_scsi_cmd(struct scsi_cmnd
* scsicmd
)
2848 struct Scsi_Host
*host
= scsicmd
->device
->host
;
2849 struct aac_dev
*dev
= (struct aac_dev
*)host
->hostdata
;
2850 struct fsa_dev_info
*fsa_dev_ptr
= dev
->fsa_dev
;
2852 if (fsa_dev_ptr
== NULL
)
2855 * If the bus, id or lun is out of range, return fail
2856 * Test does not apply to ID 16, the pseudo id for the controller
2859 cid
= scmd_id(scsicmd
);
2860 if (cid
!= host
->this_id
) {
2861 if (scmd_channel(scsicmd
) == CONTAINER_CHANNEL
) {
2862 if((cid
>= dev
->maximum_num_containers
) ||
2863 (scsicmd
->device
->lun
!= 0)) {
2864 scsicmd
->result
= DID_NO_CONNECT
<< 16;
2869 * If the target container doesn't exist, it may have
2870 * been newly created
2872 if (((fsa_dev_ptr
[cid
].valid
& 1) == 0) ||
2873 (fsa_dev_ptr
[cid
].sense_data
.sense_key
==
2875 switch (scsicmd
->cmnd
[0]) {
2876 case SERVICE_ACTION_IN_16
:
2877 if (!(dev
->raw_io_interface
) ||
2878 !(dev
->raw_io_64
) ||
2879 ((scsicmd
->cmnd
[1] & 0x1f) != SAI_READ_CAPACITY_16
))
2884 case TEST_UNIT_READY
:
2887 return _aac_probe_container(scsicmd
,
2888 aac_probe_container_callback2
);
2893 } else { /* check for physical non-dasd devices */
2894 bus
= aac_logical_to_phys(scmd_channel(scsicmd
));
2896 if (bus
< AAC_MAX_BUSES
&& cid
< AAC_MAX_TARGETS
&&
2897 dev
->hba_map
[bus
][cid
].devtype
2898 == AAC_DEVTYPE_NATIVE_RAW
) {
2901 return aac_send_hba_fib(scsicmd
);
2902 } else if (dev
->nondasd_support
|| expose_physicals
||
2906 return aac_send_srb_fib(scsicmd
);
2908 scsicmd
->result
= DID_NO_CONNECT
<< 16;
2914 * else Command for the controller itself
2916 else if ((scsicmd
->cmnd
[0] != INQUIRY
) && /* only INQUIRY & TUR cmnd supported for controller */
2917 (scsicmd
->cmnd
[0] != TEST_UNIT_READY
))
2919 dprintk((KERN_WARNING
"Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd
->cmnd
[0]));
2920 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
2921 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2922 ILLEGAL_REQUEST
, SENCODE_INVALID_COMMAND
,
2923 ASENCODE_INVALID_COMMAND
, 0, 0);
2924 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2925 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2926 SCSI_SENSE_BUFFERSIZE
));
2930 switch (scsicmd
->cmnd
[0]) {
2937 return aac_read(scsicmd
);
2945 return aac_write(scsicmd
);
2947 case SYNCHRONIZE_CACHE
:
2948 if (((aac_cache
& 6) == 6) && dev
->cache_protected
) {
2949 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2953 /* Issue FIB to tell Firmware to flush it's cache */
2954 if ((aac_cache
& 6) != 2)
2955 return aac_synchronize(scsicmd
);
2959 struct inquiry_data inq_data
;
2961 dprintk((KERN_DEBUG
"INQUIRY command, ID: %d.\n", cid
));
2962 memset(&inq_data
, 0, sizeof (struct inquiry_data
));
2964 if ((scsicmd
->cmnd
[1] & 0x1) && aac_wwn
) {
2965 char *arr
= (char *)&inq_data
;
2968 arr
[0] = (scmd_id(scsicmd
) == host
->this_id
) ?
2969 INQD_PDT_PROC
: INQD_PDT_DA
;
2970 if (scsicmd
->cmnd
[2] == 0) {
2971 /* supported vital product data pages */
2976 arr
[1] = scsicmd
->cmnd
[2];
2977 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
,
2979 scsicmd
->result
= DID_OK
<< 16 |
2980 COMMAND_COMPLETE
<< 8 |
2982 } else if (scsicmd
->cmnd
[2] == 0x80) {
2983 /* unit serial number page */
2984 arr
[3] = setinqserial(dev
, &arr
[4],
2986 arr
[1] = scsicmd
->cmnd
[2];
2987 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
,
2990 return aac_get_container_serial(
2992 scsicmd
->result
= DID_OK
<< 16 |
2993 COMMAND_COMPLETE
<< 8 |
2995 } else if (scsicmd
->cmnd
[2] == 0x83) {
2996 /* vpd page 0x83 - Device Identification Page */
2997 char *sno
= (char *)&inq_data
;
2998 sno
[3] = setinqserial(dev
, &sno
[4],
3001 return aac_get_container_serial(
3003 scsicmd
->result
= DID_OK
<< 16 |
3004 COMMAND_COMPLETE
<< 8 |
3007 /* vpd page not implemented */
3008 scsicmd
->result
= DID_OK
<< 16 |
3009 COMMAND_COMPLETE
<< 8 |
3010 SAM_STAT_CHECK_CONDITION
;
3011 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
3012 ILLEGAL_REQUEST
, SENCODE_INVALID_CDB_FIELD
,
3013 ASENCODE_NO_SENSE
, 7, 2);
3014 memcpy(scsicmd
->sense_buffer
,
3015 &dev
->fsa_dev
[cid
].sense_data
,
3017 sizeof(dev
->fsa_dev
[cid
].sense_data
),
3018 SCSI_SENSE_BUFFERSIZE
));
3022 inq_data
.inqd_ver
= 2; /* claim compliance to SCSI-2 */
3023 inq_data
.inqd_rdf
= 2; /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
3024 inq_data
.inqd_len
= 31;
3025 /*Format for "pad2" is RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
3026 inq_data
.inqd_pad2
= 0x32 ; /*WBus16|Sync|CmdQue */
3028 * Set the Vendor, Product, and Revision Level
3029 * see: <vendor>.c i.e. aac.c
3031 if (cid
== host
->this_id
) {
3032 setinqstr(dev
, (void *) (inq_data
.inqd_vid
), ARRAY_SIZE(container_types
));
3033 inq_data
.inqd_pdt
= INQD_PDT_PROC
; /* Processor device */
3034 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
,
3036 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
3042 setinqstr(dev
, (void *) (inq_data
.inqd_vid
), fsa_dev_ptr
[cid
].type
);
3043 inq_data
.inqd_pdt
= INQD_PDT_DA
; /* Direct/random access device */
3044 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
, sizeof(inq_data
));
3045 return aac_get_container_name(scsicmd
);
3047 case SERVICE_ACTION_IN_16
:
3048 if (!(dev
->raw_io_interface
) ||
3049 !(dev
->raw_io_64
) ||
3050 ((scsicmd
->cmnd
[1] & 0x1f) != SAI_READ_CAPACITY_16
))
3055 unsigned int alloc_len
;
3057 dprintk((KERN_DEBUG
"READ CAPACITY_16 command.\n"));
3058 capacity
= fsa_dev_ptr
[cid
].size
- 1;
3059 cp
[0] = (capacity
>> 56) & 0xff;
3060 cp
[1] = (capacity
>> 48) & 0xff;
3061 cp
[2] = (capacity
>> 40) & 0xff;
3062 cp
[3] = (capacity
>> 32) & 0xff;
3063 cp
[4] = (capacity
>> 24) & 0xff;
3064 cp
[5] = (capacity
>> 16) & 0xff;
3065 cp
[6] = (capacity
>> 8) & 0xff;
3066 cp
[7] = (capacity
>> 0) & 0xff;
3067 cp
[8] = (fsa_dev_ptr
[cid
].block_size
>> 24) & 0xff;
3068 cp
[9] = (fsa_dev_ptr
[cid
].block_size
>> 16) & 0xff;
3069 cp
[10] = (fsa_dev_ptr
[cid
].block_size
>> 8) & 0xff;
3070 cp
[11] = (fsa_dev_ptr
[cid
].block_size
) & 0xff;
3073 alloc_len
= ((scsicmd
->cmnd
[10] << 24)
3074 + (scsicmd
->cmnd
[11] << 16)
3075 + (scsicmd
->cmnd
[12] << 8) + scsicmd
->cmnd
[13]);
3077 alloc_len
= min_t(size_t, alloc_len
, sizeof(cp
));
3078 scsi_sg_copy_from_buffer(scsicmd
, cp
, alloc_len
);
3079 if (alloc_len
< scsi_bufflen(scsicmd
))
3080 scsi_set_resid(scsicmd
,
3081 scsi_bufflen(scsicmd
) - alloc_len
);
3083 /* Do not cache partition table for arrays */
3084 scsicmd
->device
->removable
= 1;
3086 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
3096 dprintk((KERN_DEBUG
"READ CAPACITY command.\n"));
3097 if (fsa_dev_ptr
[cid
].size
<= 0x100000000ULL
)
3098 capacity
= fsa_dev_ptr
[cid
].size
- 1;
3102 cp
[0] = (capacity
>> 24) & 0xff;
3103 cp
[1] = (capacity
>> 16) & 0xff;
3104 cp
[2] = (capacity
>> 8) & 0xff;
3105 cp
[3] = (capacity
>> 0) & 0xff;
3106 cp
[4] = (fsa_dev_ptr
[cid
].block_size
>> 24) & 0xff;
3107 cp
[5] = (fsa_dev_ptr
[cid
].block_size
>> 16) & 0xff;
3108 cp
[6] = (fsa_dev_ptr
[cid
].block_size
>> 8) & 0xff;
3109 cp
[7] = (fsa_dev_ptr
[cid
].block_size
) & 0xff;
3110 scsi_sg_copy_from_buffer(scsicmd
, cp
, sizeof(cp
));
3111 /* Do not cache partition table for arrays */
3112 scsicmd
->device
->removable
= 1;
3113 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
3120 int mode_buf_length
= 4;
3124 if (fsa_dev_ptr
[cid
].size
<= 0x100000000ULL
)
3125 capacity
= fsa_dev_ptr
[cid
].size
- 1;
3129 dprintk((KERN_DEBUG
"MODE SENSE command.\n"));
3130 memset((char *)&mpd
, 0, sizeof(aac_modep_data
));
3132 /* Mode data length */
3133 mpd
.hd
.data_length
= sizeof(mpd
.hd
) - 1;
3134 /* Medium type - default */
3135 mpd
.hd
.med_type
= 0;
3136 /* Device-specific param,
3137 bit 8: 0/1 = write enabled/protected
3138 bit 4: 0/1 = FUA enabled */
3141 if (dev
->raw_io_interface
&& ((aac_cache
& 5) != 1))
3142 mpd
.hd
.dev_par
= 0x10;
3143 if (scsicmd
->cmnd
[1] & 0x8)
3144 mpd
.hd
.bd_length
= 0; /* Block descriptor length */
3146 mpd
.hd
.bd_length
= sizeof(mpd
.bd
);
3147 mpd
.hd
.data_length
+= mpd
.hd
.bd_length
;
3148 mpd
.bd
.block_length
[0] =
3149 (fsa_dev_ptr
[cid
].block_size
>> 16) & 0xff;
3150 mpd
.bd
.block_length
[1] =
3151 (fsa_dev_ptr
[cid
].block_size
>> 8) & 0xff;
3152 mpd
.bd
.block_length
[2] =
3153 fsa_dev_ptr
[cid
].block_size
& 0xff;
3155 mpd
.mpc_buf
[0] = scsicmd
->cmnd
[2];
3156 if (scsicmd
->cmnd
[2] == 0x1C) {
3158 mpd
.mpc_buf
[1] = 0xa;
3159 /* Mode data length */
3160 mpd
.hd
.data_length
= 23;
3162 /* Mode data length */
3163 mpd
.hd
.data_length
= 15;
3166 if (capacity
> 0xffffff) {
3167 mpd
.bd
.block_count
[0] = 0xff;
3168 mpd
.bd
.block_count
[1] = 0xff;
3169 mpd
.bd
.block_count
[2] = 0xff;
3171 mpd
.bd
.block_count
[0] = (capacity
>> 16) & 0xff;
3172 mpd
.bd
.block_count
[1] = (capacity
>> 8) & 0xff;
3173 mpd
.bd
.block_count
[2] = capacity
& 0xff;
3176 if (((scsicmd
->cmnd
[2] & 0x3f) == 8) ||
3177 ((scsicmd
->cmnd
[2] & 0x3f) == 0x3f)) {
3178 mpd
.hd
.data_length
+= 3;
3181 mpd
.mpc_buf
[2] = ((aac_cache
& 6) == 2)
3182 ? 0 : 0x04; /* WCE */
3183 mode_buf_length
= sizeof(mpd
);
3186 if (mode_buf_length
> scsicmd
->cmnd
[4])
3187 mode_buf_length
= scsicmd
->cmnd
[4];
3189 mode_buf_length
= sizeof(mpd
);
3190 scsi_sg_copy_from_buffer(scsicmd
,
3193 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
3200 int mode_buf_length
= 8;
3201 aac_modep10_data mpd10
;
3203 if (fsa_dev_ptr
[cid
].size
<= 0x100000000ULL
)
3204 capacity
= fsa_dev_ptr
[cid
].size
- 1;
3208 dprintk((KERN_DEBUG
"MODE SENSE 10 byte command.\n"));
3209 memset((char *)&mpd10
, 0, sizeof(aac_modep10_data
));
3210 /* Mode data length (MSB) */
3211 mpd10
.hd
.data_length
[0] = 0;
3212 /* Mode data length (LSB) */
3213 mpd10
.hd
.data_length
[1] = sizeof(mpd10
.hd
) - 1;
3214 /* Medium type - default */
3215 mpd10
.hd
.med_type
= 0;
3216 /* Device-specific param,
3217 bit 8: 0/1 = write enabled/protected
3218 bit 4: 0/1 = FUA enabled */
3219 mpd10
.hd
.dev_par
= 0;
3221 if (dev
->raw_io_interface
&& ((aac_cache
& 5) != 1))
3222 mpd10
.hd
.dev_par
= 0x10;
3223 mpd10
.hd
.rsrvd
[0] = 0; /* reserved */
3224 mpd10
.hd
.rsrvd
[1] = 0; /* reserved */
3225 if (scsicmd
->cmnd
[1] & 0x8) {
3226 /* Block descriptor length (MSB) */
3227 mpd10
.hd
.bd_length
[0] = 0;
3228 /* Block descriptor length (LSB) */
3229 mpd10
.hd
.bd_length
[1] = 0;
3231 mpd10
.hd
.bd_length
[0] = 0;
3232 mpd10
.hd
.bd_length
[1] = sizeof(mpd10
.bd
);
3234 mpd10
.hd
.data_length
[1] += mpd10
.hd
.bd_length
[1];
3236 mpd10
.bd
.block_length
[0] =
3237 (fsa_dev_ptr
[cid
].block_size
>> 16) & 0xff;
3238 mpd10
.bd
.block_length
[1] =
3239 (fsa_dev_ptr
[cid
].block_size
>> 8) & 0xff;
3240 mpd10
.bd
.block_length
[2] =
3241 fsa_dev_ptr
[cid
].block_size
& 0xff;
3243 if (capacity
> 0xffffff) {
3244 mpd10
.bd
.block_count
[0] = 0xff;
3245 mpd10
.bd
.block_count
[1] = 0xff;
3246 mpd10
.bd
.block_count
[2] = 0xff;
3248 mpd10
.bd
.block_count
[0] =
3249 (capacity
>> 16) & 0xff;
3250 mpd10
.bd
.block_count
[1] =
3251 (capacity
>> 8) & 0xff;
3252 mpd10
.bd
.block_count
[2] =
3256 if (((scsicmd
->cmnd
[2] & 0x3f) == 8) ||
3257 ((scsicmd
->cmnd
[2] & 0x3f) == 0x3f)) {
3258 mpd10
.hd
.data_length
[1] += 3;
3259 mpd10
.mpc_buf
[0] = 8;
3260 mpd10
.mpc_buf
[1] = 1;
3261 mpd10
.mpc_buf
[2] = ((aac_cache
& 6) == 2)
3262 ? 0 : 0x04; /* WCE */
3263 mode_buf_length
= sizeof(mpd10
);
3264 if (mode_buf_length
> scsicmd
->cmnd
[8])
3265 mode_buf_length
= scsicmd
->cmnd
[8];
3267 scsi_sg_copy_from_buffer(scsicmd
,
3271 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
3276 dprintk((KERN_DEBUG
"REQUEST SENSE command.\n"));
3277 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
3278 sizeof(struct sense_data
));
3279 memset(&dev
->fsa_dev
[cid
].sense_data
, 0,
3280 sizeof(struct sense_data
));
3281 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
3285 case ALLOW_MEDIUM_REMOVAL
:
3286 dprintk((KERN_DEBUG
"LOCK command.\n"));
3287 if (scsicmd
->cmnd
[4])
3288 fsa_dev_ptr
[cid
].locked
= 1;
3290 fsa_dev_ptr
[cid
].locked
= 0;
3292 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
3296 * These commands are all No-Ops
3298 case TEST_UNIT_READY
:
3299 if (fsa_dev_ptr
[cid
].sense_data
.sense_key
== NOT_READY
) {
3300 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
3301 SAM_STAT_CHECK_CONDITION
;
3302 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
3303 NOT_READY
, SENCODE_BECOMING_READY
,
3304 ASENCODE_BECOMING_READY
, 0, 0);
3305 memcpy(scsicmd
->sense_buffer
,
3306 &dev
->fsa_dev
[cid
].sense_data
,
3308 sizeof(dev
->fsa_dev
[cid
].sense_data
),
3309 SCSI_SENSE_BUFFERSIZE
));
3316 case REASSIGN_BLOCKS
:
3318 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
3323 return aac_start_stop(scsicmd
);
3328 * Unhandled commands
3330 dprintk((KERN_WARNING
"Unhandled SCSI Command: 0x%x.\n",
3332 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
3333 SAM_STAT_CHECK_CONDITION
;
3334 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
3335 ILLEGAL_REQUEST
, SENCODE_INVALID_COMMAND
,
3336 ASENCODE_INVALID_COMMAND
, 0, 0);
3337 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
3339 sizeof(dev
->fsa_dev
[cid
].sense_data
),
3340 SCSI_SENSE_BUFFERSIZE
));
3345 scsicmd
->scsi_done(scsicmd
);
3349 static int query_disk(struct aac_dev
*dev
, void __user
*arg
)
3351 struct aac_query_disk qd
;
3352 struct fsa_dev_info
*fsa_dev_ptr
;
3354 fsa_dev_ptr
= dev
->fsa_dev
;
3357 if (copy_from_user(&qd
, arg
, sizeof (struct aac_query_disk
)))
3359 if (qd
.cnum
== -1) {
3360 if (qd
.id
< 0 || qd
.id
>= dev
->maximum_num_containers
)
3363 } else if ((qd
.bus
== -1) && (qd
.id
== -1) && (qd
.lun
== -1)) {
3364 if (qd
.cnum
< 0 || qd
.cnum
>= dev
->maximum_num_containers
)
3366 qd
.instance
= dev
->scsi_host_ptr
->host_no
;
3368 qd
.id
= CONTAINER_TO_ID(qd
.cnum
);
3369 qd
.lun
= CONTAINER_TO_LUN(qd
.cnum
);
3371 else return -EINVAL
;
3373 qd
.valid
= fsa_dev_ptr
[qd
.cnum
].valid
!= 0;
3374 qd
.locked
= fsa_dev_ptr
[qd
.cnum
].locked
;
3375 qd
.deleted
= fsa_dev_ptr
[qd
.cnum
].deleted
;
3377 if (fsa_dev_ptr
[qd
.cnum
].devname
[0] == '\0')
3382 strlcpy(qd
.name
, fsa_dev_ptr
[qd
.cnum
].devname
,
3383 min(sizeof(qd
.name
), sizeof(fsa_dev_ptr
[qd
.cnum
].devname
) + 1));
3385 if (copy_to_user(arg
, &qd
, sizeof (struct aac_query_disk
)))
3390 static int force_delete_disk(struct aac_dev
*dev
, void __user
*arg
)
3392 struct aac_delete_disk dd
;
3393 struct fsa_dev_info
*fsa_dev_ptr
;
3395 fsa_dev_ptr
= dev
->fsa_dev
;
3399 if (copy_from_user(&dd
, arg
, sizeof (struct aac_delete_disk
)))
3402 if (dd
.cnum
>= dev
->maximum_num_containers
)
3405 * Mark this container as being deleted.
3407 fsa_dev_ptr
[dd
.cnum
].deleted
= 1;
3409 * Mark the container as no longer valid
3411 fsa_dev_ptr
[dd
.cnum
].valid
= 0;
3415 static int delete_disk(struct aac_dev
*dev
, void __user
*arg
)
3417 struct aac_delete_disk dd
;
3418 struct fsa_dev_info
*fsa_dev_ptr
;
3420 fsa_dev_ptr
= dev
->fsa_dev
;
3424 if (copy_from_user(&dd
, arg
, sizeof (struct aac_delete_disk
)))
3427 if (dd
.cnum
>= dev
->maximum_num_containers
)
3430 * If the container is locked, it can not be deleted by the API.
3432 if (fsa_dev_ptr
[dd
.cnum
].locked
)
3436 * Mark the container as no longer being valid.
3438 fsa_dev_ptr
[dd
.cnum
].valid
= 0;
3439 fsa_dev_ptr
[dd
.cnum
].devname
[0] = '\0';
3444 int aac_dev_ioctl(struct aac_dev
*dev
, unsigned int cmd
, void __user
*arg
)
3447 case FSACTL_QUERY_DISK
:
3448 return query_disk(dev
, arg
);
3449 case FSACTL_DELETE_DISK
:
3450 return delete_disk(dev
, arg
);
3451 case FSACTL_FORCE_DELETE_DISK
:
3452 return force_delete_disk(dev
, arg
);
3453 case FSACTL_GET_CONTAINERS
:
3454 return aac_get_containers(dev
);
3463 * @context: the context set in the fib - here it is scsi cmd
3464 * @fibptr: pointer to the fib
3466 * Handles the completion of a scsi command to a non dasd device
3470 static void aac_srb_callback(void *context
, struct fib
* fibptr
)
3472 struct aac_srb_reply
*srbreply
;
3473 struct scsi_cmnd
*scsicmd
;
3475 scsicmd
= (struct scsi_cmnd
*) context
;
3477 if (!aac_valid_context(scsicmd
, fibptr
))
3480 BUG_ON(fibptr
== NULL
);
3482 srbreply
= (struct aac_srb_reply
*) fib_data(fibptr
);
3484 scsicmd
->sense_buffer
[0] = '\0'; /* Initialize sense valid flag to false */
3486 if (fibptr
->flags
& FIB_CONTEXT_FLAG_FASTRESP
) {
3488 srbreply
->srb_status
= cpu_to_le32(SRB_STATUS_SUCCESS
);
3489 srbreply
->scsi_status
= cpu_to_le32(SAM_STAT_GOOD
);
3492 * Calculate resid for sg
3494 scsi_set_resid(scsicmd
, scsi_bufflen(scsicmd
)
3495 - le32_to_cpu(srbreply
->data_xfer_length
));
3499 scsi_dma_unmap(scsicmd
);
3501 /* expose physical device if expose_physicald flag is on */
3502 if (scsicmd
->cmnd
[0] == INQUIRY
&& !(scsicmd
->cmnd
[1] & 0x01)
3503 && expose_physicals
> 0)
3504 aac_expose_phy_device(scsicmd
);
3507 * First check the fib status
3510 if (le32_to_cpu(srbreply
->status
) != ST_OK
) {
3513 pr_warn("aac_srb_callback: srb failed, status = %d\n",
3514 le32_to_cpu(srbreply
->status
));
3515 len
= min_t(u32
, le32_to_cpu(srbreply
->sense_data_size
),
3516 SCSI_SENSE_BUFFERSIZE
);
3517 scsicmd
->result
= DID_ERROR
<< 16
3518 | COMMAND_COMPLETE
<< 8
3519 | SAM_STAT_CHECK_CONDITION
;
3520 memcpy(scsicmd
->sense_buffer
,
3521 srbreply
->sense_data
, len
);
3525 * Next check the srb status
3527 switch ((le32_to_cpu(srbreply
->srb_status
))&0x3f) {
3528 case SRB_STATUS_ERROR_RECOVERY
:
3529 case SRB_STATUS_PENDING
:
3530 case SRB_STATUS_SUCCESS
:
3531 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
3533 case SRB_STATUS_DATA_OVERRUN
:
3534 switch (scsicmd
->cmnd
[0]) {
3543 if (le32_to_cpu(srbreply
->data_xfer_length
)
3544 < scsicmd
->underflow
)
3545 pr_warn("aacraid: SCSI CMD underflow\n");
3547 pr_warn("aacraid: SCSI CMD Data Overrun\n");
3548 scsicmd
->result
= DID_ERROR
<< 16
3549 | COMMAND_COMPLETE
<< 8;
3552 scsicmd
->result
= DID_OK
<< 16
3553 | COMMAND_COMPLETE
<< 8;
3556 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
3560 case SRB_STATUS_ABORTED
:
3561 scsicmd
->result
= DID_ABORT
<< 16 | ABORT
<< 8;
3563 case SRB_STATUS_ABORT_FAILED
:
3565 * Not sure about this one - but assuming the
3566 * hba was trying to abort for some reason
3568 scsicmd
->result
= DID_ERROR
<< 16 | ABORT
<< 8;
3570 case SRB_STATUS_PARITY_ERROR
:
3571 scsicmd
->result
= DID_PARITY
<< 16
3572 | MSG_PARITY_ERROR
<< 8;
3574 case SRB_STATUS_NO_DEVICE
:
3575 case SRB_STATUS_INVALID_PATH_ID
:
3576 case SRB_STATUS_INVALID_TARGET_ID
:
3577 case SRB_STATUS_INVALID_LUN
:
3578 case SRB_STATUS_SELECTION_TIMEOUT
:
3579 scsicmd
->result
= DID_NO_CONNECT
<< 16
3580 | COMMAND_COMPLETE
<< 8;
3583 case SRB_STATUS_COMMAND_TIMEOUT
:
3584 case SRB_STATUS_TIMEOUT
:
3585 scsicmd
->result
= DID_TIME_OUT
<< 16
3586 | COMMAND_COMPLETE
<< 8;
3589 case SRB_STATUS_BUSY
:
3590 scsicmd
->result
= DID_BUS_BUSY
<< 16
3591 | COMMAND_COMPLETE
<< 8;
3594 case SRB_STATUS_BUS_RESET
:
3595 scsicmd
->result
= DID_RESET
<< 16
3596 | COMMAND_COMPLETE
<< 8;
3599 case SRB_STATUS_MESSAGE_REJECTED
:
3600 scsicmd
->result
= DID_ERROR
<< 16
3601 | MESSAGE_REJECT
<< 8;
3603 case SRB_STATUS_REQUEST_FLUSHED
:
3604 case SRB_STATUS_ERROR
:
3605 case SRB_STATUS_INVALID_REQUEST
:
3606 case SRB_STATUS_REQUEST_SENSE_FAILED
:
3607 case SRB_STATUS_NO_HBA
:
3608 case SRB_STATUS_UNEXPECTED_BUS_FREE
:
3609 case SRB_STATUS_PHASE_SEQUENCE_FAILURE
:
3610 case SRB_STATUS_BAD_SRB_BLOCK_LENGTH
:
3611 case SRB_STATUS_DELAYED_RETRY
:
3612 case SRB_STATUS_BAD_FUNCTION
:
3613 case SRB_STATUS_NOT_STARTED
:
3614 case SRB_STATUS_NOT_IN_USE
:
3615 case SRB_STATUS_FORCE_ABORT
:
3616 case SRB_STATUS_DOMAIN_VALIDATION_FAIL
:
3618 #ifdef AAC_DETAILED_STATUS_INFO
3619 pr_info("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x -scsi status 0x%x\n",
3620 le32_to_cpu(srbreply
->srb_status
) & 0x3F,
3621 aac_get_status_string(
3622 le32_to_cpu(srbreply
->srb_status
) & 0x3F),
3624 le32_to_cpu(srbreply
->scsi_status
));
3627 * When the CC bit is SET by the host in ATA pass thru CDB,
3628 * driver is supposed to return DID_OK
3630 * When the CC bit is RESET by the host, driver should
3633 if ((scsicmd
->cmnd
[0] == ATA_12
)
3634 || (scsicmd
->cmnd
[0] == ATA_16
)) {
3636 if (scsicmd
->cmnd
[2] & (0x01 << 5)) {
3637 scsicmd
->result
= DID_OK
<< 16
3638 | COMMAND_COMPLETE
<< 8;
3641 scsicmd
->result
= DID_ERROR
<< 16
3642 | COMMAND_COMPLETE
<< 8;
3646 scsicmd
->result
= DID_ERROR
<< 16
3647 | COMMAND_COMPLETE
<< 8;
3651 if (le32_to_cpu(srbreply
->scsi_status
)
3652 == SAM_STAT_CHECK_CONDITION
) {
3655 scsicmd
->result
|= SAM_STAT_CHECK_CONDITION
;
3656 len
= min_t(u32
, le32_to_cpu(srbreply
->sense_data_size
),
3657 SCSI_SENSE_BUFFERSIZE
);
3658 #ifdef AAC_DETAILED_STATUS_INFO
3659 pr_warn("aac_srb_callback: check condition, status = %d len=%d\n",
3660 le32_to_cpu(srbreply
->status
), len
);
3662 memcpy(scsicmd
->sense_buffer
,
3663 srbreply
->sense_data
, len
);
3667 * OR in the scsi status (already shifted up a bit)
3669 scsicmd
->result
|= le32_to_cpu(srbreply
->scsi_status
);
3671 aac_fib_complete(fibptr
);
3672 scsicmd
->scsi_done(scsicmd
);
3675 static void hba_resp_task_complete(struct aac_dev
*dev
,
3676 struct scsi_cmnd
*scsicmd
,
3677 struct aac_hba_resp
*err
) {
3679 scsicmd
->result
= err
->status
;
3680 /* set residual count */
3681 scsi_set_resid(scsicmd
, le32_to_cpu(err
->residual_count
));
3683 switch (err
->status
) {
3685 scsicmd
->result
|= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
3687 case SAM_STAT_CHECK_CONDITION
:
3691 len
= min_t(u8
, err
->sense_response_data_len
,
3692 SCSI_SENSE_BUFFERSIZE
);
3694 memcpy(scsicmd
->sense_buffer
,
3695 err
->sense_response_buf
, len
);
3696 scsicmd
->result
|= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
3700 scsicmd
->result
|= DID_BUS_BUSY
<< 16 | COMMAND_COMPLETE
<< 8;
3702 case SAM_STAT_TASK_ABORTED
:
3703 scsicmd
->result
|= DID_ABORT
<< 16 | ABORT
<< 8;
3705 case SAM_STAT_RESERVATION_CONFLICT
:
3706 case SAM_STAT_TASK_SET_FULL
:
3708 scsicmd
->result
|= DID_ERROR
<< 16 | COMMAND_COMPLETE
<< 8;
3713 static void hba_resp_task_failure(struct aac_dev
*dev
,
3714 struct scsi_cmnd
*scsicmd
,
3715 struct aac_hba_resp
*err
)
3717 switch (err
->status
) {
3718 case HBA_RESP_STAT_HBAMODE_DISABLED
:
3722 bus
= aac_logical_to_phys(scmd_channel(scsicmd
));
3723 cid
= scmd_id(scsicmd
);
3724 if (dev
->hba_map
[bus
][cid
].devtype
== AAC_DEVTYPE_NATIVE_RAW
) {
3725 dev
->hba_map
[bus
][cid
].devtype
= AAC_DEVTYPE_ARC_RAW
;
3726 dev
->hba_map
[bus
][cid
].rmw_nexus
= 0xffffffff;
3728 scsicmd
->result
= DID_NO_CONNECT
<< 16 | COMMAND_COMPLETE
<< 8;
3731 case HBA_RESP_STAT_IO_ERROR
:
3732 case HBA_RESP_STAT_NO_PATH_TO_DEVICE
:
3733 scsicmd
->result
= DID_OK
<< 16 |
3734 COMMAND_COMPLETE
<< 8 | SAM_STAT_BUSY
;
3736 case HBA_RESP_STAT_IO_ABORTED
:
3737 scsicmd
->result
= DID_ABORT
<< 16 | ABORT
<< 8;
3739 case HBA_RESP_STAT_INVALID_DEVICE
:
3740 scsicmd
->result
= DID_NO_CONNECT
<< 16 | COMMAND_COMPLETE
<< 8;
3742 case HBA_RESP_STAT_UNDERRUN
:
3743 /* UNDERRUN is OK */
3744 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
3746 case HBA_RESP_STAT_OVERRUN
:
3748 scsicmd
->result
= DID_ERROR
<< 16 | COMMAND_COMPLETE
<< 8;
3756 * @context: the context set in the fib - here it is scsi cmd
3757 * @fibptr: pointer to the fib
3759 * Handles the completion of a native HBA scsi command
3762 void aac_hba_callback(void *context
, struct fib
*fibptr
)
3764 struct aac_dev
*dev
;
3765 struct scsi_cmnd
*scsicmd
;
3767 struct aac_hba_resp
*err
=
3768 &((struct aac_native_hba
*)fibptr
->hw_fib_va
)->resp
.err
;
3770 scsicmd
= (struct scsi_cmnd
*) context
;
3772 if (!aac_valid_context(scsicmd
, fibptr
))
3775 WARN_ON(fibptr
== NULL
);
3778 if (!(fibptr
->flags
& FIB_CONTEXT_FLAG_NATIVE_HBA_TMF
))
3779 scsi_dma_unmap(scsicmd
);
3781 if (fibptr
->flags
& FIB_CONTEXT_FLAG_FASTRESP
) {
3783 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
3787 switch (err
->service_response
) {
3788 case HBA_RESP_SVCRES_TASK_COMPLETE
:
3789 hba_resp_task_complete(dev
, scsicmd
, err
);
3791 case HBA_RESP_SVCRES_FAILURE
:
3792 hba_resp_task_failure(dev
, scsicmd
, err
);
3794 case HBA_RESP_SVCRES_TMF_REJECTED
:
3795 scsicmd
->result
= DID_ERROR
<< 16 | MESSAGE_REJECT
<< 8;
3797 case HBA_RESP_SVCRES_TMF_LUN_INVALID
:
3798 scsicmd
->result
= DID_NO_CONNECT
<< 16 | COMMAND_COMPLETE
<< 8;
3800 case HBA_RESP_SVCRES_TMF_COMPLETE
:
3801 case HBA_RESP_SVCRES_TMF_SUCCEEDED
:
3802 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
3805 scsicmd
->result
= DID_ERROR
<< 16 | COMMAND_COMPLETE
<< 8;
3810 aac_fib_complete(fibptr
);
3812 if (fibptr
->flags
& FIB_CONTEXT_FLAG_NATIVE_HBA_TMF
)
3813 scsicmd
->SCp
.sent_command
= 1;
3815 scsicmd
->scsi_done(scsicmd
);
3821 * @scsicmd: the scsi command block
3823 * This routine will form a FIB and fill in the aac_srb from the
3824 * scsicmd passed in.
3827 static int aac_send_srb_fib(struct scsi_cmnd
* scsicmd
)
3829 struct fib
* cmd_fibcontext
;
3830 struct aac_dev
* dev
;
3833 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
3834 if (scmd_id(scsicmd
) >= dev
->maximum_num_physicals
||
3835 scsicmd
->device
->lun
> 7) {
3836 scsicmd
->result
= DID_NO_CONNECT
<< 16;
3837 scsicmd
->scsi_done(scsicmd
);
3842 * Allocate and initialize a Fib then setup a BlockWrite command
3844 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
3845 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
3846 status
= aac_adapter_scsi(cmd_fibcontext
, scsicmd
);
3849 * Check that the command queued to the controller
3851 if (status
== -EINPROGRESS
)
3854 printk(KERN_WARNING
"aac_srb: aac_fib_send failed with status: %d\n", status
);
3855 aac_fib_complete(cmd_fibcontext
);
3856 aac_fib_free(cmd_fibcontext
);
3864 * @scsicmd: the scsi command block
3866 * This routine will form a FIB and fill in the aac_hba_cmd_req from the
3867 * scsicmd passed in.
3869 static int aac_send_hba_fib(struct scsi_cmnd
*scsicmd
)
3871 struct fib
*cmd_fibcontext
;
3872 struct aac_dev
*dev
;
3875 dev
= shost_priv(scsicmd
->device
->host
);
3876 if (scmd_id(scsicmd
) >= dev
->maximum_num_physicals
||
3877 scsicmd
->device
->lun
> AAC_MAX_LUN
- 1) {
3878 scsicmd
->result
= DID_NO_CONNECT
<< 16;
3879 scsicmd
->scsi_done(scsicmd
);
3884 * Allocate and initialize a Fib then setup a BlockWrite command
3886 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
3887 if (!cmd_fibcontext
)
3890 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
3891 status
= aac_adapter_hba(cmd_fibcontext
, scsicmd
);
3894 * Check that the command queued to the controller
3896 if (status
== -EINPROGRESS
)
3899 pr_warn("aac_hba_cmd_req: aac_fib_send failed with status: %d\n",
3901 aac_fib_complete(cmd_fibcontext
);
3902 aac_fib_free(cmd_fibcontext
);
3908 static long aac_build_sg(struct scsi_cmnd
*scsicmd
, struct sgmap
*psg
)
3910 unsigned long byte_count
= 0;
3912 struct scatterlist
*sg
;
3915 // Get rid of old data
3917 psg
->sg
[0].addr
= 0;
3918 psg
->sg
[0].count
= 0;
3920 nseg
= scsi_dma_map(scsicmd
);
3924 psg
->count
= cpu_to_le32(nseg
);
3926 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
3927 psg
->sg
[i
].addr
= cpu_to_le32(sg_dma_address(sg
));
3928 psg
->sg
[i
].count
= cpu_to_le32(sg_dma_len(sg
));
3929 byte_count
+= sg_dma_len(sg
);
3931 /* hba wants the size to be exact */
3932 if (byte_count
> scsi_bufflen(scsicmd
)) {
3933 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
3934 (byte_count
- scsi_bufflen(scsicmd
));
3935 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
3936 byte_count
= scsi_bufflen(scsicmd
);
3938 /* Check for command underflow */
3939 if (scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)) {
3940 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
3941 byte_count
, scsicmd
->underflow
);
3948 static long aac_build_sg64(struct scsi_cmnd
*scsicmd
, struct sgmap64
*psg
)
3950 unsigned long byte_count
= 0;
3953 struct scatterlist
*sg
;
3956 // Get rid of old data
3958 psg
->sg
[0].addr
[0] = 0;
3959 psg
->sg
[0].addr
[1] = 0;
3960 psg
->sg
[0].count
= 0;
3962 nseg
= scsi_dma_map(scsicmd
);
3966 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
3967 int count
= sg_dma_len(sg
);
3968 addr
= sg_dma_address(sg
);
3969 psg
->sg
[i
].addr
[0] = cpu_to_le32(addr
& 0xffffffff);
3970 psg
->sg
[i
].addr
[1] = cpu_to_le32(addr
>>32);
3971 psg
->sg
[i
].count
= cpu_to_le32(count
);
3972 byte_count
+= count
;
3974 psg
->count
= cpu_to_le32(nseg
);
3975 /* hba wants the size to be exact */
3976 if (byte_count
> scsi_bufflen(scsicmd
)) {
3977 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
3978 (byte_count
- scsi_bufflen(scsicmd
));
3979 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
3980 byte_count
= scsi_bufflen(scsicmd
);
3982 /* Check for command underflow */
3983 if (scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)) {
3984 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
3985 byte_count
, scsicmd
->underflow
);
3991 static long aac_build_sgraw(struct scsi_cmnd
*scsicmd
, struct sgmapraw
*psg
)
3993 unsigned long byte_count
= 0;
3995 struct scatterlist
*sg
;
3998 // Get rid of old data
4000 psg
->sg
[0].next
= 0;
4001 psg
->sg
[0].prev
= 0;
4002 psg
->sg
[0].addr
[0] = 0;
4003 psg
->sg
[0].addr
[1] = 0;
4004 psg
->sg
[0].count
= 0;
4005 psg
->sg
[0].flags
= 0;
4007 nseg
= scsi_dma_map(scsicmd
);
4011 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
4012 int count
= sg_dma_len(sg
);
4013 u64 addr
= sg_dma_address(sg
);
4014 psg
->sg
[i
].next
= 0;
4015 psg
->sg
[i
].prev
= 0;
4016 psg
->sg
[i
].addr
[1] = cpu_to_le32((u32
)(addr
>>32));
4017 psg
->sg
[i
].addr
[0] = cpu_to_le32((u32
)(addr
& 0xffffffff));
4018 psg
->sg
[i
].count
= cpu_to_le32(count
);
4019 psg
->sg
[i
].flags
= 0;
4020 byte_count
+= count
;
4022 psg
->count
= cpu_to_le32(nseg
);
4023 /* hba wants the size to be exact */
4024 if (byte_count
> scsi_bufflen(scsicmd
)) {
4025 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
4026 (byte_count
- scsi_bufflen(scsicmd
));
4027 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
4028 byte_count
= scsi_bufflen(scsicmd
);
4030 /* Check for command underflow */
4031 if (scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)) {
4032 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
4033 byte_count
, scsicmd
->underflow
);
4039 static long aac_build_sgraw2(struct scsi_cmnd
*scsicmd
,
4040 struct aac_raw_io2
*rio2
, int sg_max
)
4042 unsigned long byte_count
= 0;
4044 struct scatterlist
*sg
;
4045 int i
, conformable
= 0;
4046 u32 min_size
= PAGE_SIZE
, cur_size
;
4048 nseg
= scsi_dma_map(scsicmd
);
4052 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
4053 int count
= sg_dma_len(sg
);
4054 u64 addr
= sg_dma_address(sg
);
4056 BUG_ON(i
>= sg_max
);
4057 rio2
->sge
[i
].addrHigh
= cpu_to_le32((u32
)(addr
>>32));
4058 rio2
->sge
[i
].addrLow
= cpu_to_le32((u32
)(addr
& 0xffffffff));
4059 cur_size
= cpu_to_le32(count
);
4060 rio2
->sge
[i
].length
= cur_size
;
4061 rio2
->sge
[i
].flags
= 0;
4064 rio2
->sgeFirstSize
= cur_size
;
4065 } else if (i
== 1) {
4066 rio2
->sgeNominalSize
= cur_size
;
4067 min_size
= cur_size
;
4068 } else if ((i
+1) < nseg
&& cur_size
!= rio2
->sgeNominalSize
) {
4070 if (cur_size
< min_size
)
4071 min_size
= cur_size
;
4073 byte_count
+= count
;
4076 /* hba wants the size to be exact */
4077 if (byte_count
> scsi_bufflen(scsicmd
)) {
4078 u32 temp
= le32_to_cpu(rio2
->sge
[i
-1].length
) -
4079 (byte_count
- scsi_bufflen(scsicmd
));
4080 rio2
->sge
[i
-1].length
= cpu_to_le32(temp
);
4081 byte_count
= scsi_bufflen(scsicmd
);
4084 rio2
->sgeCnt
= cpu_to_le32(nseg
);
4085 rio2
->flags
|= cpu_to_le16(RIO2_SG_FORMAT_IEEE1212
);
4086 /* not conformable: evaluate required sg elements */
4088 int j
, nseg_new
= nseg
, err_found
;
4089 for (i
= min_size
/ PAGE_SIZE
; i
>= 1; --i
) {
4092 for (j
= 1; j
< nseg
- 1; ++j
) {
4093 if (rio2
->sge
[j
].length
% (i
*PAGE_SIZE
)) {
4097 nseg_new
+= (rio2
->sge
[j
].length
/ (i
*PAGE_SIZE
));
4102 if (i
> 0 && nseg_new
<= sg_max
) {
4103 int ret
= aac_convert_sgraw2(rio2
, i
, nseg
, nseg_new
);
4109 rio2
->flags
|= cpu_to_le16(RIO2_SGL_CONFORMANT
);
4111 /* Check for command underflow */
4112 if (scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)) {
4113 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
4114 byte_count
, scsicmd
->underflow
);
4120 static int aac_convert_sgraw2(struct aac_raw_io2
*rio2
, int pages
, int nseg
, int nseg_new
)
4122 struct sge_ieee1212
*sge
;
4126 if (aac_convert_sgl
== 0)
4129 sge
= kmalloc_array(nseg_new
, sizeof(struct sge_ieee1212
), GFP_ATOMIC
);
4133 for (i
= 1, pos
= 1; i
< nseg
-1; ++i
) {
4134 for (j
= 0; j
< rio2
->sge
[i
].length
/ (pages
* PAGE_SIZE
); ++j
) {
4135 addr_low
= rio2
->sge
[i
].addrLow
+ j
* pages
* PAGE_SIZE
;
4136 sge
[pos
].addrLow
= addr_low
;
4137 sge
[pos
].addrHigh
= rio2
->sge
[i
].addrHigh
;
4138 if (addr_low
< rio2
->sge
[i
].addrLow
)
4139 sge
[pos
].addrHigh
++;
4140 sge
[pos
].length
= pages
* PAGE_SIZE
;
4145 sge
[pos
] = rio2
->sge
[nseg
-1];
4146 memcpy(&rio2
->sge
[1], &sge
[1], (nseg_new
-1)*sizeof(struct sge_ieee1212
));
4149 rio2
->sgeCnt
= cpu_to_le32(nseg_new
);
4150 rio2
->flags
|= cpu_to_le16(RIO2_SGL_CONFORMANT
);
4151 rio2
->sgeNominalSize
= pages
* PAGE_SIZE
;
4155 static long aac_build_sghba(struct scsi_cmnd
*scsicmd
,
4156 struct aac_hba_cmd_req
*hbacmd
,
4160 unsigned long byte_count
= 0;
4162 struct scatterlist
*sg
;
4165 struct aac_hba_sgl
*sge
;
4167 nseg
= scsi_dma_map(scsicmd
);
4173 if (nseg
> HBA_MAX_SG_EMBEDDED
)
4174 sge
= &hbacmd
->sge
[2];
4176 sge
= &hbacmd
->sge
[0];
4178 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
4179 int count
= sg_dma_len(sg
);
4180 u64 addr
= sg_dma_address(sg
);
4182 WARN_ON(i
>= sg_max
);
4183 sge
->addr_hi
= cpu_to_le32((u32
)(addr
>>32));
4184 sge
->addr_lo
= cpu_to_le32((u32
)(addr
& 0xffffffff));
4185 cur_size
= cpu_to_le32(count
);
4186 sge
->len
= cur_size
;
4188 byte_count
+= count
;
4193 /* hba wants the size to be exact */
4194 if (byte_count
> scsi_bufflen(scsicmd
)) {
4197 temp
= le32_to_cpu(sge
->len
) - byte_count
4198 - scsi_bufflen(scsicmd
);
4199 sge
->len
= cpu_to_le32(temp
);
4200 byte_count
= scsi_bufflen(scsicmd
);
4203 if (nseg
<= HBA_MAX_SG_EMBEDDED
) {
4204 hbacmd
->emb_data_desc_count
= cpu_to_le32(nseg
);
4205 sge
->flags
= cpu_to_le32(0x40000000);
4208 hbacmd
->sge
[0].flags
= cpu_to_le32(0x80000000);
4209 hbacmd
->emb_data_desc_count
= (u8
)cpu_to_le32(1);
4210 hbacmd
->sge
[0].addr_hi
= (u32
)cpu_to_le32(sg_address
>> 32);
4211 hbacmd
->sge
[0].addr_lo
=
4212 cpu_to_le32((u32
)(sg_address
& 0xffffffff));
4215 /* Check for command underflow */
4216 if (scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)) {
4217 pr_warn("aacraid: cmd len %08lX cmd underflow %08X\n",
4218 byte_count
, scsicmd
->underflow
);
4224 #ifdef AAC_DETAILED_STATUS_INFO
4226 struct aac_srb_status_info
{
4232 static struct aac_srb_status_info srb_status_info
[] = {
4233 { SRB_STATUS_PENDING
, "Pending Status"},
4234 { SRB_STATUS_SUCCESS
, "Success"},
4235 { SRB_STATUS_ABORTED
, "Aborted Command"},
4236 { SRB_STATUS_ABORT_FAILED
, "Abort Failed"},
4237 { SRB_STATUS_ERROR
, "Error Event"},
4238 { SRB_STATUS_BUSY
, "Device Busy"},
4239 { SRB_STATUS_INVALID_REQUEST
, "Invalid Request"},
4240 { SRB_STATUS_INVALID_PATH_ID
, "Invalid Path ID"},
4241 { SRB_STATUS_NO_DEVICE
, "No Device"},
4242 { SRB_STATUS_TIMEOUT
, "Timeout"},
4243 { SRB_STATUS_SELECTION_TIMEOUT
, "Selection Timeout"},
4244 { SRB_STATUS_COMMAND_TIMEOUT
, "Command Timeout"},
4245 { SRB_STATUS_MESSAGE_REJECTED
, "Message Rejected"},
4246 { SRB_STATUS_BUS_RESET
, "Bus Reset"},
4247 { SRB_STATUS_PARITY_ERROR
, "Parity Error"},
4248 { SRB_STATUS_REQUEST_SENSE_FAILED
,"Request Sense Failed"},
4249 { SRB_STATUS_NO_HBA
, "No HBA"},
4250 { SRB_STATUS_DATA_OVERRUN
, "Data Overrun/Data Underrun"},
4251 { SRB_STATUS_UNEXPECTED_BUS_FREE
,"Unexpected Bus Free"},
4252 { SRB_STATUS_PHASE_SEQUENCE_FAILURE
,"Phase Error"},
4253 { SRB_STATUS_BAD_SRB_BLOCK_LENGTH
,"Bad Srb Block Length"},
4254 { SRB_STATUS_REQUEST_FLUSHED
, "Request Flushed"},
4255 { SRB_STATUS_DELAYED_RETRY
, "Delayed Retry"},
4256 { SRB_STATUS_INVALID_LUN
, "Invalid LUN"},
4257 { SRB_STATUS_INVALID_TARGET_ID
, "Invalid TARGET ID"},
4258 { SRB_STATUS_BAD_FUNCTION
, "Bad Function"},
4259 { SRB_STATUS_ERROR_RECOVERY
, "Error Recovery"},
4260 { SRB_STATUS_NOT_STARTED
, "Not Started"},
4261 { SRB_STATUS_NOT_IN_USE
, "Not In Use"},
4262 { SRB_STATUS_FORCE_ABORT
, "Force Abort"},
4263 { SRB_STATUS_DOMAIN_VALIDATION_FAIL
,"Domain Validation Failure"},
4264 { 0xff, "Unknown Error"}
4267 char *aac_get_status_string(u32 status
)
4271 for (i
= 0; i
< ARRAY_SIZE(srb_status_info
); i
++)
4272 if (srb_status_info
[i
].status
== status
)
4273 return srb_status_info
[i
].str
;
4275 return "Bad Status Code";