net_sched: sch_hhf: defer skb freeing
[linux/fpc-iii.git] / arch / arm / mach-sa1100 / pci-nanoengine.c
blobd7ae8d50f6d8b11f1abded819a2551dbe23829d8
1 /*
2 * linux/arch/arm/mach-sa1100/pci-nanoengine.c
4 * PCI functions for BSE nanoEngine PCI
6 * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 #include <linux/kernel.h>
23 #include <linux/irq.h>
24 #include <linux/pci.h>
26 #include <asm/mach/pci.h>
27 #include <asm/mach-types.h>
29 #include <mach/nanoengine.h>
30 #include <mach/hardware.h>
32 static void __iomem *nanoengine_pci_map_bus(struct pci_bus *bus,
33 unsigned int devfn, int where)
35 if (bus->number != 0 || (devfn >> 3) != 0)
36 return NULL;
38 return (void __iomem *)NANO_PCI_CONFIG_SPACE_VIRT +
39 ((bus->number << 16) | (devfn << 8) | (where & ~3));
42 static struct pci_ops pci_nano_ops = {
43 .map_bus = nanoengine_pci_map_bus,
44 .read = pci_generic_config_read32,
45 .write = pci_generic_config_write32,
48 static int __init pci_nanoengine_map_irq(const struct pci_dev *dev, u8 slot,
49 u8 pin)
51 return NANOENGINE_IRQ_GPIO_PCI;
54 static struct resource pci_io_ports =
55 DEFINE_RES_IO_NAMED(0x400, 0x400, "PCI IO");
57 static struct resource pci_non_prefetchable_memory = {
58 .name = "PCI non-prefetchable",
59 .start = NANO_PCI_MEM_RW_PHYS,
60 /* nanoEngine documentation says there is a 1 Megabyte window here,
61 * but PCI reports just 128 + 8 kbytes. */
62 .end = NANO_PCI_MEM_RW_PHYS + NANO_PCI_MEM_RW_SIZE - 1,
63 /* .end = NANO_PCI_MEM_RW_PHYS + SZ_128K + SZ_8K - 1,*/
64 .flags = IORESOURCE_MEM,
68 * nanoEngine PCI reports 1 Megabyte of prefetchable memory, but it
69 * overlaps with previously defined memory.
71 * Here is what happens:
73 # dmesg
74 ...
75 pci 0000:00:00.0: [8086:1209] type 0 class 0x000200
76 pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff]
77 pci 0000:00:00.0: reg 14: [io 0x0000-0x003f]
78 pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff]
79 pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
80 pci 0000:00:00.0: supports D1 D2
81 pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
82 pci 0000:00:00.0: PME# disabled
83 PCI: bus0: Fast back to back transfers enabled
84 pci 0000:00:00.0: BAR 6: can't assign mem pref (size 0x100000)
85 pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff]
86 pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff])
87 pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff]
88 pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff])
89 pci 0000:00:00.0: BAR 1: assigned [io 0x0400-0x043f]
90 pci 0000:00:00.0: BAR 1: set to [io 0x0400-0x043f] (PCI address [0x0-0x3f])
92 * On the other hand, if we do not request the prefetchable memory resource,
93 * linux will alloc it first and the two non-prefetchable memory areas that
94 * are our real interest will not be mapped. So we choose to map it to an
95 * unused area. It gets recognized as expansion ROM, but becomes disabled.
97 * Here is what happens then:
99 # dmesg
101 pci 0000:00:00.0: [8086:1209] type 0 class 0x000200
102 pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff]
103 pci 0000:00:00.0: reg 14: [io 0x0000-0x003f]
104 pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff]
105 pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
106 pci 0000:00:00.0: supports D1 D2
107 pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
108 pci 0000:00:00.0: PME# disabled
109 PCI: bus0: Fast back to back transfers enabled
110 pci 0000:00:00.0: BAR 6: assigned [mem 0x78000000-0x780fffff pref]
111 pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff]
112 pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff])
113 pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff]
114 pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff])
115 pci 0000:00:00.0: BAR 1: assigned [io 0x0400-0x043f]
116 pci 0000:00:00.0: BAR 1: set to [io 0x0400-0x043f] (PCI address [0x0-0x3f])
118 # lspci -vv -s 0000:00:00.0
119 00:00.0 Class 0200: Device 8086:1209 (rev 09)
120 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
121 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+ INTx-
122 Latency: 0 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
123 Interrupt: pin A routed to IRQ 0
124 Region 0: Memory at 18620000 (32-bit, non-prefetchable) [size=4K]
125 Region 1: I/O ports at 0400 [size=64]
126 Region 2: [virtual] Memory at 18600000 (32-bit, non-prefetchable) [size=128K]
127 [virtual] Expansion ROM at 78000000 [disabled] [size=1M]
128 Capabilities: [dc] Power Management version 2
129 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
130 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
131 Kernel driver in use: e100
132 Kernel modules: e100
135 static struct resource pci_prefetchable_memory = {
136 .name = "PCI prefetchable",
137 .start = 0x78000000,
138 .end = 0x78000000 + NANO_PCI_MEM_RW_SIZE - 1,
139 .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH,
142 static int __init pci_nanoengine_setup_resources(struct pci_sys_data *sys)
144 if (request_resource(&ioport_resource, &pci_io_ports)) {
145 printk(KERN_ERR "PCI: unable to allocate io port region\n");
146 return -EBUSY;
148 if (request_resource(&iomem_resource, &pci_non_prefetchable_memory)) {
149 release_resource(&pci_io_ports);
150 printk(KERN_ERR "PCI: unable to allocate non prefetchable\n");
151 return -EBUSY;
153 if (request_resource(&iomem_resource, &pci_prefetchable_memory)) {
154 release_resource(&pci_io_ports);
155 release_resource(&pci_non_prefetchable_memory);
156 printk(KERN_ERR "PCI: unable to allocate prefetchable\n");
157 return -EBUSY;
159 pci_add_resource_offset(&sys->resources, &pci_io_ports, sys->io_offset);
160 pci_add_resource_offset(&sys->resources,
161 &pci_non_prefetchable_memory, sys->mem_offset);
162 pci_add_resource_offset(&sys->resources,
163 &pci_prefetchable_memory, sys->mem_offset);
165 return 1;
168 int __init pci_nanoengine_setup(int nr, struct pci_sys_data *sys)
170 int ret = 0;
172 pcibios_min_io = 0;
173 pcibios_min_mem = 0;
175 if (nr == 0) {
176 sys->mem_offset = NANO_PCI_MEM_RW_PHYS;
177 sys->io_offset = 0x400;
178 ret = pci_nanoengine_setup_resources(sys);
179 /* Enable alternate memory bus master mode, see
180 * "Intel StrongARM SA1110 Developer's Manual",
181 * section 10.8, "Alternate Memory Bus Master Mode". */
182 GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
183 GAFR |= GPIO_MBGNT | GPIO_MBREQ;
184 TUCR |= TUCR_MBGPIO;
187 return ret;
190 static struct hw_pci nanoengine_pci __initdata = {
191 .map_irq = pci_nanoengine_map_irq,
192 .nr_controllers = 1,
193 .ops = &pci_nano_ops,
194 .setup = pci_nanoengine_setup,
197 static int __init nanoengine_pci_init(void)
199 if (machine_is_nanoengine())
200 pci_common_init(&nanoengine_pci);
201 return 0;
204 subsys_initcall(nanoengine_pci_init);