2 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
4 * Copyright (c) 2008-2009 USI Co., Ltd.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
41 #include <linux/slab.h>
42 #include "pm8001_sas.h"
45 * pm8001_find_tag - from sas task to find out tag that belongs to this task
46 * @task: the task sent to the LLDD
47 * @tag: the found tag associated with the task
49 static int pm8001_find_tag(struct sas_task
*task
, u32
*tag
)
51 if (task
->lldd_task
) {
52 struct pm8001_ccb_info
*ccb
;
53 ccb
= task
->lldd_task
;
61 * pm8001_tag_free - free the no more needed tag
62 * @pm8001_ha: our hba struct
63 * @tag: the found tag associated with the task
65 void pm8001_tag_free(struct pm8001_hba_info
*pm8001_ha
, u32 tag
)
67 void *bitmap
= pm8001_ha
->tags
;
68 clear_bit(tag
, bitmap
);
72 * pm8001_tag_alloc - allocate a empty tag for task used.
73 * @pm8001_ha: our hba struct
74 * @tag_out: the found empty tag .
76 inline int pm8001_tag_alloc(struct pm8001_hba_info
*pm8001_ha
, u32
*tag_out
)
79 void *bitmap
= pm8001_ha
->tags
;
82 spin_lock_irqsave(&pm8001_ha
->bitmap_lock
, flags
);
83 tag
= find_first_zero_bit(bitmap
, pm8001_ha
->tags_num
);
84 if (tag
>= pm8001_ha
->tags_num
) {
85 spin_unlock_irqrestore(&pm8001_ha
->bitmap_lock
, flags
);
86 return -SAS_QUEUE_FULL
;
89 spin_unlock_irqrestore(&pm8001_ha
->bitmap_lock
, flags
);
94 void pm8001_tag_init(struct pm8001_hba_info
*pm8001_ha
)
97 for (i
= 0; i
< pm8001_ha
->tags_num
; ++i
)
98 pm8001_tag_free(pm8001_ha
, i
);
102 * pm8001_mem_alloc - allocate memory for pm8001.
104 * @virt_addr: the allocated virtual address
105 * @pphys_addr_hi: the physical address high byte address.
106 * @pphys_addr_lo: the physical address low byte address.
107 * @mem_size: memory size.
109 int pm8001_mem_alloc(struct pci_dev
*pdev
, void **virt_addr
,
110 dma_addr_t
*pphys_addr
, u32
*pphys_addr_hi
,
111 u32
*pphys_addr_lo
, u32 mem_size
, u32 align
)
113 caddr_t mem_virt_alloc
;
114 dma_addr_t mem_dma_handle
;
116 u64 align_offset
= 0;
118 align_offset
= (dma_addr_t
)align
- 1;
119 mem_virt_alloc
= pci_zalloc_consistent(pdev
, mem_size
+ align
,
121 if (!mem_virt_alloc
) {
122 pm8001_printk("memory allocation error\n");
125 *pphys_addr
= mem_dma_handle
;
126 phys_align
= (*pphys_addr
+ align_offset
) & ~align_offset
;
127 *virt_addr
= (void *)mem_virt_alloc
+ phys_align
- *pphys_addr
;
128 *pphys_addr_hi
= upper_32_bits(phys_align
);
129 *pphys_addr_lo
= lower_32_bits(phys_align
);
133 * pm8001_find_ha_by_dev - from domain device which come from sas layer to
134 * find out our hba struct.
135 * @dev: the domain device which from sas layer.
138 struct pm8001_hba_info
*pm8001_find_ha_by_dev(struct domain_device
*dev
)
140 struct sas_ha_struct
*sha
= dev
->port
->ha
;
141 struct pm8001_hba_info
*pm8001_ha
= sha
->lldd_ha
;
146 * pm8001_phy_control - this function should be registered to
147 * sas_domain_function_template to provide libsas used, note: this is just
148 * control the HBA phy rather than other expander phy if you want control
149 * other phy, you should use SMP command.
150 * @sas_phy: which phy in HBA phys.
151 * @func: the operation.
152 * @funcdata: always NULL.
154 int pm8001_phy_control(struct asd_sas_phy
*sas_phy
, enum phy_func func
,
157 int rc
= 0, phy_id
= sas_phy
->id
;
158 struct pm8001_hba_info
*pm8001_ha
= NULL
;
159 struct sas_phy_linkrates
*rates
;
160 DECLARE_COMPLETION_ONSTACK(completion
);
162 pm8001_ha
= sas_phy
->ha
->lldd_ha
;
163 pm8001_ha
->phy
[phy_id
].enable_completion
= &completion
;
165 case PHY_FUNC_SET_LINK_RATE
:
167 if (rates
->minimum_linkrate
) {
168 pm8001_ha
->phy
[phy_id
].minimum_linkrate
=
169 rates
->minimum_linkrate
;
171 if (rates
->maximum_linkrate
) {
172 pm8001_ha
->phy
[phy_id
].maximum_linkrate
=
173 rates
->maximum_linkrate
;
175 if (pm8001_ha
->phy
[phy_id
].phy_state
== 0) {
176 PM8001_CHIP_DISP
->phy_start_req(pm8001_ha
, phy_id
);
177 wait_for_completion(&completion
);
179 PM8001_CHIP_DISP
->phy_ctl_req(pm8001_ha
, phy_id
,
182 case PHY_FUNC_HARD_RESET
:
183 if (pm8001_ha
->phy
[phy_id
].phy_state
== 0) {
184 PM8001_CHIP_DISP
->phy_start_req(pm8001_ha
, phy_id
);
185 wait_for_completion(&completion
);
187 PM8001_CHIP_DISP
->phy_ctl_req(pm8001_ha
, phy_id
,
190 case PHY_FUNC_LINK_RESET
:
191 if (pm8001_ha
->phy
[phy_id
].phy_state
== 0) {
192 PM8001_CHIP_DISP
->phy_start_req(pm8001_ha
, phy_id
);
193 wait_for_completion(&completion
);
195 PM8001_CHIP_DISP
->phy_ctl_req(pm8001_ha
, phy_id
,
198 case PHY_FUNC_RELEASE_SPINUP_HOLD
:
199 PM8001_CHIP_DISP
->phy_ctl_req(pm8001_ha
, phy_id
,
202 case PHY_FUNC_DISABLE
:
203 PM8001_CHIP_DISP
->phy_stop_req(pm8001_ha
, phy_id
);
205 case PHY_FUNC_GET_EVENTS
:
206 spin_lock_irqsave(&pm8001_ha
->lock
, flags
);
207 if (pm8001_ha
->chip_id
== chip_8001
) {
208 if (-1 == pm8001_bar4_shift(pm8001_ha
,
209 (phy_id
< 4) ? 0x30000 : 0x40000)) {
210 spin_unlock_irqrestore(&pm8001_ha
->lock
, flags
);
215 struct sas_phy
*phy
= sas_phy
->phy
;
216 uint32_t *qp
= (uint32_t *)(((char *)
217 pm8001_ha
->io_mem
[2].memvirtaddr
)
218 + 0x1034 + (0x4000 * (phy_id
& 3)));
220 phy
->invalid_dword_count
= qp
[0];
221 phy
->running_disparity_error_count
= qp
[1];
222 phy
->loss_of_dword_sync_count
= qp
[3];
223 phy
->phy_reset_problem_count
= qp
[4];
225 if (pm8001_ha
->chip_id
== chip_8001
)
226 pm8001_bar4_shift(pm8001_ha
, 0);
227 spin_unlock_irqrestore(&pm8001_ha
->lock
, flags
);
237 * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
239 * @shost: the scsi host data.
241 void pm8001_scan_start(struct Scsi_Host
*shost
)
244 struct pm8001_hba_info
*pm8001_ha
;
245 struct sas_ha_struct
*sha
= SHOST_TO_SAS_HA(shost
);
246 pm8001_ha
= sha
->lldd_ha
;
247 /* SAS_RE_INITIALIZATION not available in SPCv/ve */
248 if (pm8001_ha
->chip_id
== chip_8001
)
249 PM8001_CHIP_DISP
->sas_re_init_req(pm8001_ha
);
250 for (i
= 0; i
< pm8001_ha
->chip
->n_phy
; ++i
)
251 PM8001_CHIP_DISP
->phy_start_req(pm8001_ha
, i
);
254 int pm8001_scan_finished(struct Scsi_Host
*shost
, unsigned long time
)
256 struct sas_ha_struct
*ha
= SHOST_TO_SAS_HA(shost
);
258 /* give the phy enabling interrupt event time to come in (1s
259 * is empirically about all it takes) */
262 /* Wait for discovery to finish */
268 * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
269 * @pm8001_ha: our hba card information
270 * @ccb: the ccb which attached to smp task
272 static int pm8001_task_prep_smp(struct pm8001_hba_info
*pm8001_ha
,
273 struct pm8001_ccb_info
*ccb
)
275 return PM8001_CHIP_DISP
->smp_req(pm8001_ha
, ccb
);
278 u32
pm8001_get_ncq_tag(struct sas_task
*task
, u32
*tag
)
280 struct ata_queued_cmd
*qc
= task
->uldd_task
;
282 if (qc
->tf
.command
== ATA_CMD_FPDMA_WRITE
||
283 qc
->tf
.command
== ATA_CMD_FPDMA_READ
||
284 qc
->tf
.command
== ATA_CMD_FPDMA_RECV
||
285 qc
->tf
.command
== ATA_CMD_FPDMA_SEND
||
286 qc
->tf
.command
== ATA_CMD_NCQ_NON_DATA
) {
295 * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
296 * @pm8001_ha: our hba card information
297 * @ccb: the ccb which attached to sata task
299 static int pm8001_task_prep_ata(struct pm8001_hba_info
*pm8001_ha
,
300 struct pm8001_ccb_info
*ccb
)
302 return PM8001_CHIP_DISP
->sata_req(pm8001_ha
, ccb
);
306 * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
307 * @pm8001_ha: our hba card information
308 * @ccb: the ccb which attached to TM
309 * @tmf: the task management IU
311 static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info
*pm8001_ha
,
312 struct pm8001_ccb_info
*ccb
, struct pm8001_tmf_task
*tmf
)
314 return PM8001_CHIP_DISP
->ssp_tm_req(pm8001_ha
, ccb
, tmf
);
318 * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task
319 * @pm8001_ha: our hba card information
320 * @ccb: the ccb which attached to ssp task
322 static int pm8001_task_prep_ssp(struct pm8001_hba_info
*pm8001_ha
,
323 struct pm8001_ccb_info
*ccb
)
325 return PM8001_CHIP_DISP
->ssp_io_req(pm8001_ha
, ccb
);
328 /* Find the local port id that's attached to this device */
329 static int sas_find_local_port_id(struct domain_device
*dev
)
331 struct domain_device
*pdev
= dev
->parent
;
333 /* Directly attached device */
335 return dev
->port
->id
;
337 struct domain_device
*pdev_p
= pdev
->parent
;
339 return pdev
->port
->id
;
346 * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware.
347 * @task: the task to be execute.
348 * @num: if can_queue great than 1, the task can be queued up. for SMP task,
349 * we always execute one one time.
350 * @gfp_flags: gfp_flags.
351 * @is_tmf: if it is task management task.
352 * @tmf: the task management IU
354 #define DEV_IS_GONE(pm8001_dev) \
355 ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
356 static int pm8001_task_exec(struct sas_task
*task
,
357 gfp_t gfp_flags
, int is_tmf
, struct pm8001_tmf_task
*tmf
)
359 struct domain_device
*dev
= task
->dev
;
360 struct pm8001_hba_info
*pm8001_ha
;
361 struct pm8001_device
*pm8001_dev
;
362 struct pm8001_port
*port
= NULL
;
363 struct sas_task
*t
= task
;
364 struct pm8001_ccb_info
*ccb
;
365 u32 tag
= 0xdeadbeef, rc
, n_elem
= 0;
366 unsigned long flags
= 0;
369 struct task_status_struct
*tsm
= &t
->task_status
;
370 tsm
->resp
= SAS_TASK_UNDELIVERED
;
371 tsm
->stat
= SAS_PHY_DOWN
;
372 if (dev
->dev_type
!= SAS_SATA_DEV
)
376 pm8001_ha
= pm8001_find_ha_by_dev(task
->dev
);
377 PM8001_IO_DBG(pm8001_ha
, pm8001_printk("pm8001_task_exec device \n "));
378 spin_lock_irqsave(&pm8001_ha
->lock
, flags
);
381 pm8001_dev
= dev
->lldd_dev
;
382 port
= &pm8001_ha
->port
[sas_find_local_port_id(dev
)];
383 if (DEV_IS_GONE(pm8001_dev
) || !port
->port_attached
) {
384 if (sas_protocol_ata(t
->task_proto
)) {
385 struct task_status_struct
*ts
= &t
->task_status
;
386 ts
->resp
= SAS_TASK_UNDELIVERED
;
387 ts
->stat
= SAS_PHY_DOWN
;
389 spin_unlock_irqrestore(&pm8001_ha
->lock
, flags
);
391 spin_lock_irqsave(&pm8001_ha
->lock
, flags
);
394 struct task_status_struct
*ts
= &t
->task_status
;
395 ts
->resp
= SAS_TASK_UNDELIVERED
;
396 ts
->stat
= SAS_PHY_DOWN
;
401 rc
= pm8001_tag_alloc(pm8001_ha
, &tag
);
404 ccb
= &pm8001_ha
->ccb_info
[tag
];
406 if (!sas_protocol_ata(t
->task_proto
)) {
407 if (t
->num_scatter
) {
408 n_elem
= dma_map_sg(pm8001_ha
->dev
,
418 n_elem
= t
->num_scatter
;
422 ccb
->n_elem
= n_elem
;
425 ccb
->device
= pm8001_dev
;
426 switch (t
->task_proto
) {
427 case SAS_PROTOCOL_SMP
:
428 rc
= pm8001_task_prep_smp(pm8001_ha
, ccb
);
430 case SAS_PROTOCOL_SSP
:
432 rc
= pm8001_task_prep_ssp_tm(pm8001_ha
,
435 rc
= pm8001_task_prep_ssp(pm8001_ha
, ccb
);
437 case SAS_PROTOCOL_SATA
:
438 case SAS_PROTOCOL_STP
:
439 rc
= pm8001_task_prep_ata(pm8001_ha
, ccb
);
442 dev_printk(KERN_ERR
, pm8001_ha
->dev
,
443 "unknown sas_task proto: 0x%x\n",
450 PM8001_IO_DBG(pm8001_ha
,
451 pm8001_printk("rc is %x\n", rc
));
454 /* TODO: select normal or high priority */
455 spin_lock(&t
->task_state_lock
);
456 t
->task_state_flags
|= SAS_TASK_AT_INITIATOR
;
457 spin_unlock(&t
->task_state_lock
);
458 pm8001_dev
->running_req
++;
464 pm8001_tag_free(pm8001_ha
, tag
);
466 dev_printk(KERN_ERR
, pm8001_ha
->dev
, "pm8001 exec failed[%d]!\n", rc
);
467 if (!sas_protocol_ata(t
->task_proto
))
469 dma_unmap_sg(pm8001_ha
->dev
, t
->scatter
, n_elem
,
472 spin_unlock_irqrestore(&pm8001_ha
->lock
, flags
);
477 * pm8001_queue_command - register for upper layer used, all IO commands sent
478 * to HBA are from this interface.
479 * @task: the task to be execute.
480 * @gfp_flags: gfp_flags
482 int pm8001_queue_command(struct sas_task
*task
, gfp_t gfp_flags
)
484 return pm8001_task_exec(task
, gfp_flags
, 0, NULL
);
488 * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
489 * @pm8001_ha: our hba card information
490 * @ccb: the ccb which attached to ssp task
491 * @task: the task to be free.
492 * @ccb_idx: ccb index.
494 void pm8001_ccb_task_free(struct pm8001_hba_info
*pm8001_ha
,
495 struct sas_task
*task
, struct pm8001_ccb_info
*ccb
, u32 ccb_idx
)
499 if (!sas_protocol_ata(task
->task_proto
))
501 dma_unmap_sg(pm8001_ha
->dev
, task
->scatter
,
502 task
->num_scatter
, task
->data_dir
);
504 switch (task
->task_proto
) {
505 case SAS_PROTOCOL_SMP
:
506 dma_unmap_sg(pm8001_ha
->dev
, &task
->smp_task
.smp_resp
, 1,
508 dma_unmap_sg(pm8001_ha
->dev
, &task
->smp_task
.smp_req
, 1,
512 case SAS_PROTOCOL_SATA
:
513 case SAS_PROTOCOL_STP
:
514 case SAS_PROTOCOL_SSP
:
519 task
->lldd_task
= NULL
;
521 ccb
->ccb_tag
= 0xFFFFFFFF;
523 pm8001_tag_free(pm8001_ha
, ccb_idx
);
527 * pm8001_alloc_dev - find a empty pm8001_device
528 * @pm8001_ha: our hba card information
530 static struct pm8001_device
*pm8001_alloc_dev(struct pm8001_hba_info
*pm8001_ha
)
533 for (dev
= 0; dev
< PM8001_MAX_DEVICES
; dev
++) {
534 if (pm8001_ha
->devices
[dev
].dev_type
== SAS_PHY_UNUSED
) {
535 pm8001_ha
->devices
[dev
].id
= dev
;
536 return &pm8001_ha
->devices
[dev
];
539 if (dev
== PM8001_MAX_DEVICES
) {
540 PM8001_FAIL_DBG(pm8001_ha
,
541 pm8001_printk("max support %d devices, ignore ..\n",
542 PM8001_MAX_DEVICES
));
547 * pm8001_find_dev - find a matching pm8001_device
548 * @pm8001_ha: our hba card information
550 struct pm8001_device
*pm8001_find_dev(struct pm8001_hba_info
*pm8001_ha
,
554 for (dev
= 0; dev
< PM8001_MAX_DEVICES
; dev
++) {
555 if (pm8001_ha
->devices
[dev
].device_id
== device_id
)
556 return &pm8001_ha
->devices
[dev
];
558 if (dev
== PM8001_MAX_DEVICES
) {
559 PM8001_FAIL_DBG(pm8001_ha
, pm8001_printk("NO MATCHING "
560 "DEVICE FOUND !!!\n"));
565 static void pm8001_free_dev(struct pm8001_device
*pm8001_dev
)
567 u32 id
= pm8001_dev
->id
;
568 memset(pm8001_dev
, 0, sizeof(*pm8001_dev
));
570 pm8001_dev
->dev_type
= SAS_PHY_UNUSED
;
571 pm8001_dev
->device_id
= PM8001_MAX_DEVICES
;
572 pm8001_dev
->sas_device
= NULL
;
576 * pm8001_dev_found_notify - libsas notify a device is found.
577 * @dev: the device structure which sas layer used.
579 * when libsas find a sas domain device, it should tell the LLDD that
580 * device is found, and then LLDD register this device to HBA firmware
581 * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
582 * device ID(according to device's sas address) and returned it to LLDD. From
583 * now on, we communicate with HBA FW with the device ID which HBA assigned
584 * rather than sas address. it is the necessary step for our HBA but it is
585 * the optional for other HBA driver.
587 static int pm8001_dev_found_notify(struct domain_device
*dev
)
589 unsigned long flags
= 0;
591 struct pm8001_hba_info
*pm8001_ha
= NULL
;
592 struct domain_device
*parent_dev
= dev
->parent
;
593 struct pm8001_device
*pm8001_device
;
594 DECLARE_COMPLETION_ONSTACK(completion
);
596 pm8001_ha
= pm8001_find_ha_by_dev(dev
);
597 spin_lock_irqsave(&pm8001_ha
->lock
, flags
);
599 pm8001_device
= pm8001_alloc_dev(pm8001_ha
);
600 if (!pm8001_device
) {
604 pm8001_device
->sas_device
= dev
;
605 dev
->lldd_dev
= pm8001_device
;
606 pm8001_device
->dev_type
= dev
->dev_type
;
607 pm8001_device
->dcompletion
= &completion
;
608 if (parent_dev
&& DEV_IS_EXPANDER(parent_dev
->dev_type
)) {
611 for (phy_id
= 0; phy_id
< parent_dev
->ex_dev
.num_phys
;
613 phy
= &parent_dev
->ex_dev
.ex_phy
[phy_id
];
614 if (SAS_ADDR(phy
->attached_sas_addr
)
615 == SAS_ADDR(dev
->sas_addr
)) {
616 pm8001_device
->attached_phy
= phy_id
;
620 if (phy_id
== parent_dev
->ex_dev
.num_phys
) {
621 PM8001_FAIL_DBG(pm8001_ha
,
622 pm8001_printk("Error: no attached dev:%016llx"
623 " at ex:%016llx.\n", SAS_ADDR(dev
->sas_addr
),
624 SAS_ADDR(parent_dev
->sas_addr
)));
628 if (dev
->dev_type
== SAS_SATA_DEV
) {
629 pm8001_device
->attached_phy
=
630 dev
->rphy
->identify
.phy_identifier
;
631 flag
= 1; /* directly sata*/
633 } /*register this device to HBA*/
634 PM8001_DISC_DBG(pm8001_ha
, pm8001_printk("Found device\n"));
635 PM8001_CHIP_DISP
->reg_dev_req(pm8001_ha
, pm8001_device
, flag
);
636 spin_unlock_irqrestore(&pm8001_ha
->lock
, flags
);
637 wait_for_completion(&completion
);
638 if (dev
->dev_type
== SAS_END_DEVICE
)
640 pm8001_ha
->flags
= PM8001F_RUN_TIME
;
643 spin_unlock_irqrestore(&pm8001_ha
->lock
, flags
);
647 int pm8001_dev_found(struct domain_device
*dev
)
649 return pm8001_dev_found_notify(dev
);
652 void pm8001_task_done(struct sas_task
*task
)
654 if (!del_timer(&task
->slow_task
->timer
))
656 complete(&task
->slow_task
->completion
);
659 static void pm8001_tmf_timedout(unsigned long data
)
661 struct sas_task
*task
= (struct sas_task
*)data
;
663 task
->task_state_flags
|= SAS_TASK_STATE_ABORTED
;
664 complete(&task
->slow_task
->completion
);
667 #define PM8001_TASK_TIMEOUT 20
669 * pm8001_exec_internal_tmf_task - execute some task management commands.
670 * @dev: the wanted device.
671 * @tmf: which task management wanted to be take.
672 * @para_len: para_len.
673 * @parameter: ssp task parameter.
675 * when errors or exception happened, we may want to do something, for example
676 * abort the issued task which result in this execption, it is done by calling
677 * this function, note it is also with the task execute interface.
679 static int pm8001_exec_internal_tmf_task(struct domain_device
*dev
,
680 void *parameter
, u32 para_len
, struct pm8001_tmf_task
*tmf
)
683 struct sas_task
*task
= NULL
;
684 struct pm8001_hba_info
*pm8001_ha
= pm8001_find_ha_by_dev(dev
);
685 struct pm8001_device
*pm8001_dev
= dev
->lldd_dev
;
686 DECLARE_COMPLETION_ONSTACK(completion_setstate
);
688 for (retry
= 0; retry
< 3; retry
++) {
689 task
= sas_alloc_slow_task(GFP_KERNEL
);
694 task
->task_proto
= dev
->tproto
;
695 memcpy(&task
->ssp_task
, parameter
, para_len
);
696 task
->task_done
= pm8001_task_done
;
697 task
->slow_task
->timer
.data
= (unsigned long)task
;
698 task
->slow_task
->timer
.function
= pm8001_tmf_timedout
;
699 task
->slow_task
->timer
.expires
= jiffies
+ PM8001_TASK_TIMEOUT
*HZ
;
700 add_timer(&task
->slow_task
->timer
);
702 res
= pm8001_task_exec(task
, GFP_KERNEL
, 1, tmf
);
705 del_timer(&task
->slow_task
->timer
);
706 PM8001_FAIL_DBG(pm8001_ha
,
707 pm8001_printk("Executing internal task "
711 wait_for_completion(&task
->slow_task
->completion
);
712 if (pm8001_ha
->chip_id
!= chip_8001
) {
713 pm8001_dev
->setds_completion
= &completion_setstate
;
714 PM8001_CHIP_DISP
->set_dev_state_req(pm8001_ha
,
716 wait_for_completion(&completion_setstate
);
718 res
= -TMF_RESP_FUNC_FAILED
;
719 /* Even TMF timed out, return direct. */
720 if ((task
->task_state_flags
& SAS_TASK_STATE_ABORTED
)) {
721 if (!(task
->task_state_flags
& SAS_TASK_STATE_DONE
)) {
722 PM8001_FAIL_DBG(pm8001_ha
,
723 pm8001_printk("TMF task[%x]timeout.\n",
729 if (task
->task_status
.resp
== SAS_TASK_COMPLETE
&&
730 task
->task_status
.stat
== SAM_STAT_GOOD
) {
731 res
= TMF_RESP_FUNC_COMPLETE
;
735 if (task
->task_status
.resp
== SAS_TASK_COMPLETE
&&
736 task
->task_status
.stat
== SAS_DATA_UNDERRUN
) {
737 /* no error, but return the number of bytes of
739 res
= task
->task_status
.residual
;
743 if (task
->task_status
.resp
== SAS_TASK_COMPLETE
&&
744 task
->task_status
.stat
== SAS_DATA_OVERRUN
) {
745 PM8001_FAIL_DBG(pm8001_ha
,
746 pm8001_printk("Blocked task error.\n"));
750 PM8001_EH_DBG(pm8001_ha
,
751 pm8001_printk(" Task to dev %016llx response:"
752 "0x%x status 0x%x\n",
753 SAS_ADDR(dev
->sas_addr
),
754 task
->task_status
.resp
,
755 task
->task_status
.stat
));
761 BUG_ON(retry
== 3 && task
!= NULL
);
767 pm8001_exec_internal_task_abort(struct pm8001_hba_info
*pm8001_ha
,
768 struct pm8001_device
*pm8001_dev
, struct domain_device
*dev
, u32 flag
,
773 struct pm8001_ccb_info
*ccb
;
774 struct sas_task
*task
= NULL
;
776 for (retry
= 0; retry
< 3; retry
++) {
777 task
= sas_alloc_slow_task(GFP_KERNEL
);
782 task
->task_proto
= dev
->tproto
;
783 task
->task_done
= pm8001_task_done
;
784 task
->slow_task
->timer
.data
= (unsigned long)task
;
785 task
->slow_task
->timer
.function
= pm8001_tmf_timedout
;
786 task
->slow_task
->timer
.expires
= jiffies
+ PM8001_TASK_TIMEOUT
* HZ
;
787 add_timer(&task
->slow_task
->timer
);
789 res
= pm8001_tag_alloc(pm8001_ha
, &ccb_tag
);
792 ccb
= &pm8001_ha
->ccb_info
[ccb_tag
];
793 ccb
->device
= pm8001_dev
;
794 ccb
->ccb_tag
= ccb_tag
;
798 res
= PM8001_CHIP_DISP
->task_abort(pm8001_ha
,
799 pm8001_dev
, flag
, task_tag
, ccb_tag
);
802 del_timer(&task
->slow_task
->timer
);
803 PM8001_FAIL_DBG(pm8001_ha
,
804 pm8001_printk("Executing internal task "
808 wait_for_completion(&task
->slow_task
->completion
);
809 res
= TMF_RESP_FUNC_FAILED
;
810 /* Even TMF timed out, return direct. */
811 if ((task
->task_state_flags
& SAS_TASK_STATE_ABORTED
)) {
812 if (!(task
->task_state_flags
& SAS_TASK_STATE_DONE
)) {
813 PM8001_FAIL_DBG(pm8001_ha
,
814 pm8001_printk("TMF task timeout.\n"));
819 if (task
->task_status
.resp
== SAS_TASK_COMPLETE
&&
820 task
->task_status
.stat
== SAM_STAT_GOOD
) {
821 res
= TMF_RESP_FUNC_COMPLETE
;
825 PM8001_EH_DBG(pm8001_ha
,
826 pm8001_printk(" Task to dev %016llx response: "
827 "0x%x status 0x%x\n",
828 SAS_ADDR(dev
->sas_addr
),
829 task
->task_status
.resp
,
830 task
->task_status
.stat
));
836 BUG_ON(retry
== 3 && task
!= NULL
);
842 * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
843 * @dev: the device structure which sas layer used.
845 static void pm8001_dev_gone_notify(struct domain_device
*dev
)
847 unsigned long flags
= 0;
848 struct pm8001_hba_info
*pm8001_ha
;
849 struct pm8001_device
*pm8001_dev
= dev
->lldd_dev
;
851 pm8001_ha
= pm8001_find_ha_by_dev(dev
);
852 spin_lock_irqsave(&pm8001_ha
->lock
, flags
);
854 u32 device_id
= pm8001_dev
->device_id
;
856 PM8001_DISC_DBG(pm8001_ha
,
857 pm8001_printk("found dev[%d:%x] is gone.\n",
858 pm8001_dev
->device_id
, pm8001_dev
->dev_type
));
859 if (pm8001_dev
->running_req
) {
860 spin_unlock_irqrestore(&pm8001_ha
->lock
, flags
);
861 pm8001_exec_internal_task_abort(pm8001_ha
, pm8001_dev
,
863 spin_lock_irqsave(&pm8001_ha
->lock
, flags
);
865 PM8001_CHIP_DISP
->dereg_dev_req(pm8001_ha
, device_id
);
866 pm8001_free_dev(pm8001_dev
);
868 PM8001_DISC_DBG(pm8001_ha
,
869 pm8001_printk("Found dev has gone.\n"));
871 dev
->lldd_dev
= NULL
;
872 spin_unlock_irqrestore(&pm8001_ha
->lock
, flags
);
875 void pm8001_dev_gone(struct domain_device
*dev
)
877 pm8001_dev_gone_notify(dev
);
880 static int pm8001_issue_ssp_tmf(struct domain_device
*dev
,
881 u8
*lun
, struct pm8001_tmf_task
*tmf
)
883 struct sas_ssp_task ssp_task
;
884 if (!(dev
->tproto
& SAS_PROTOCOL_SSP
))
885 return TMF_RESP_FUNC_ESUPP
;
887 strncpy((u8
*)&ssp_task
.LUN
, lun
, 8);
888 return pm8001_exec_internal_tmf_task(dev
, &ssp_task
, sizeof(ssp_task
),
892 /* retry commands by ha, by task and/or by device */
893 void pm8001_open_reject_retry(
894 struct pm8001_hba_info
*pm8001_ha
,
895 struct sas_task
*task_to_close
,
896 struct pm8001_device
*device_to_close
)
901 if (pm8001_ha
== NULL
)
904 spin_lock_irqsave(&pm8001_ha
->lock
, flags
);
906 for (i
= 0; i
< PM8001_MAX_CCB
; i
++) {
907 struct sas_task
*task
;
908 struct task_status_struct
*ts
;
909 struct pm8001_device
*pm8001_dev
;
910 unsigned long flags1
;
912 struct pm8001_ccb_info
*ccb
= &pm8001_ha
->ccb_info
[i
];
914 pm8001_dev
= ccb
->device
;
915 if (!pm8001_dev
|| (pm8001_dev
->dev_type
== SAS_PHY_UNUSED
))
917 if (!device_to_close
) {
918 uintptr_t d
= (uintptr_t)pm8001_dev
919 - (uintptr_t)&pm8001_ha
->devices
;
920 if (((d
% sizeof(*pm8001_dev
)) != 0)
921 || ((d
/ sizeof(*pm8001_dev
)) >= PM8001_MAX_DEVICES
))
923 } else if (pm8001_dev
!= device_to_close
)
926 if (!tag
|| (tag
== 0xFFFFFFFF))
929 if (!task
|| !task
->task_done
)
931 if (task_to_close
&& (task
!= task_to_close
))
933 ts
= &task
->task_status
;
934 ts
->resp
= SAS_TASK_COMPLETE
;
935 /* Force the midlayer to retry */
936 ts
->stat
= SAS_OPEN_REJECT
;
937 ts
->open_rej_reason
= SAS_OREJ_RSVD_RETRY
;
939 pm8001_dev
->running_req
--;
940 spin_lock_irqsave(&task
->task_state_lock
, flags1
);
941 task
->task_state_flags
&= ~SAS_TASK_STATE_PENDING
;
942 task
->task_state_flags
&= ~SAS_TASK_AT_INITIATOR
;
943 task
->task_state_flags
|= SAS_TASK_STATE_DONE
;
944 if (unlikely((task
->task_state_flags
945 & SAS_TASK_STATE_ABORTED
))) {
946 spin_unlock_irqrestore(&task
->task_state_lock
,
948 pm8001_ccb_task_free(pm8001_ha
, task
, ccb
, tag
);
950 spin_unlock_irqrestore(&task
->task_state_lock
,
952 pm8001_ccb_task_free(pm8001_ha
, task
, ccb
, tag
);
953 mb();/* in order to force CPU ordering */
954 spin_unlock_irqrestore(&pm8001_ha
->lock
, flags
);
955 task
->task_done(task
);
956 spin_lock_irqsave(&pm8001_ha
->lock
, flags
);
960 spin_unlock_irqrestore(&pm8001_ha
->lock
, flags
);
964 * Standard mandates link reset for ATA (type 0) and hard reset for
965 * SSP (type 1) , only for RECOVERY
967 int pm8001_I_T_nexus_reset(struct domain_device
*dev
)
969 int rc
= TMF_RESP_FUNC_FAILED
;
970 struct pm8001_device
*pm8001_dev
;
971 struct pm8001_hba_info
*pm8001_ha
;
974 if (!dev
|| !dev
->lldd_dev
)
977 pm8001_dev
= dev
->lldd_dev
;
978 pm8001_ha
= pm8001_find_ha_by_dev(dev
);
979 phy
= sas_get_local_phy(dev
);
981 if (dev_is_sata(dev
)) {
982 if (scsi_is_sas_phy_local(phy
)) {
986 rc
= sas_phy_reset(phy
, 1);
988 PM8001_EH_DBG(pm8001_ha
,
989 pm8001_printk("phy reset failed for device %x\n"
990 "with rc %d\n", pm8001_dev
->device_id
, rc
));
991 rc
= TMF_RESP_FUNC_FAILED
;
995 rc
= pm8001_exec_internal_task_abort(pm8001_ha
, pm8001_dev
,
998 PM8001_EH_DBG(pm8001_ha
,
999 pm8001_printk("task abort failed %x\n"
1000 "with rc %d\n", pm8001_dev
->device_id
, rc
));
1001 rc
= TMF_RESP_FUNC_FAILED
;
1004 rc
= sas_phy_reset(phy
, 1);
1007 PM8001_EH_DBG(pm8001_ha
, pm8001_printk(" for device[%x]:rc=%d\n",
1008 pm8001_dev
->device_id
, rc
));
1010 sas_put_local_phy(phy
);
1015 * This function handle the IT_NEXUS_XXX event or completion
1016 * status code for SSP/SATA/SMP I/O request.
1018 int pm8001_I_T_nexus_event_handler(struct domain_device
*dev
)
1020 int rc
= TMF_RESP_FUNC_FAILED
;
1021 struct pm8001_device
*pm8001_dev
;
1022 struct pm8001_hba_info
*pm8001_ha
;
1023 struct sas_phy
*phy
;
1026 if (!dev
|| !dev
->lldd_dev
)
1029 pm8001_dev
= dev
->lldd_dev
;
1030 device_id
= pm8001_dev
->device_id
;
1031 pm8001_ha
= pm8001_find_ha_by_dev(dev
);
1033 PM8001_EH_DBG(pm8001_ha
,
1034 pm8001_printk("I_T_Nexus handler invoked !!"));
1036 phy
= sas_get_local_phy(dev
);
1038 if (dev_is_sata(dev
)) {
1039 DECLARE_COMPLETION_ONSTACK(completion_setstate
);
1040 if (scsi_is_sas_phy_local(phy
)) {
1044 /* send internal ssp/sata/smp abort command to FW */
1045 rc
= pm8001_exec_internal_task_abort(pm8001_ha
, pm8001_dev
,
1049 /* deregister the target device */
1050 pm8001_dev_gone_notify(dev
);
1053 /*send phy reset to hard reset target */
1054 rc
= sas_phy_reset(phy
, 1);
1056 pm8001_dev
->setds_completion
= &completion_setstate
;
1058 wait_for_completion(&completion_setstate
);
1060 /* send internal ssp/sata/smp abort command to FW */
1061 rc
= pm8001_exec_internal_task_abort(pm8001_ha
, pm8001_dev
,
1065 /* deregister the target device */
1066 pm8001_dev_gone_notify(dev
);
1069 /*send phy reset to hard reset target */
1070 rc
= sas_phy_reset(phy
, 1);
1073 PM8001_EH_DBG(pm8001_ha
, pm8001_printk(" for device[%x]:rc=%d\n",
1074 pm8001_dev
->device_id
, rc
));
1076 sas_put_local_phy(phy
);
1080 /* mandatory SAM-3, the task reset the specified LUN*/
1081 int pm8001_lu_reset(struct domain_device
*dev
, u8
*lun
)
1083 int rc
= TMF_RESP_FUNC_FAILED
;
1084 struct pm8001_tmf_task tmf_task
;
1085 struct pm8001_device
*pm8001_dev
= dev
->lldd_dev
;
1086 struct pm8001_hba_info
*pm8001_ha
= pm8001_find_ha_by_dev(dev
);
1087 DECLARE_COMPLETION_ONSTACK(completion_setstate
);
1088 if (dev_is_sata(dev
)) {
1089 struct sas_phy
*phy
= sas_get_local_phy(dev
);
1090 rc
= pm8001_exec_internal_task_abort(pm8001_ha
, pm8001_dev
,
1092 rc
= sas_phy_reset(phy
, 1);
1093 sas_put_local_phy(phy
);
1094 pm8001_dev
->setds_completion
= &completion_setstate
;
1095 rc
= PM8001_CHIP_DISP
->set_dev_state_req(pm8001_ha
,
1097 wait_for_completion(&completion_setstate
);
1099 tmf_task
.tmf
= TMF_LU_RESET
;
1100 rc
= pm8001_issue_ssp_tmf(dev
, lun
, &tmf_task
);
1102 /* If failed, fall-through I_T_Nexus reset */
1103 PM8001_EH_DBG(pm8001_ha
, pm8001_printk("for device[%x]:rc=%d\n",
1104 pm8001_dev
->device_id
, rc
));
1108 /* optional SAM-3 */
1109 int pm8001_query_task(struct sas_task
*task
)
1111 u32 tag
= 0xdeadbeef;
1113 struct scsi_lun lun
;
1114 struct pm8001_tmf_task tmf_task
;
1115 int rc
= TMF_RESP_FUNC_FAILED
;
1116 if (unlikely(!task
|| !task
->lldd_task
|| !task
->dev
))
1119 if (task
->task_proto
& SAS_PROTOCOL_SSP
) {
1120 struct scsi_cmnd
*cmnd
= task
->uldd_task
;
1121 struct domain_device
*dev
= task
->dev
;
1122 struct pm8001_hba_info
*pm8001_ha
=
1123 pm8001_find_ha_by_dev(dev
);
1125 int_to_scsilun(cmnd
->device
->lun
, &lun
);
1126 rc
= pm8001_find_tag(task
, &tag
);
1128 rc
= TMF_RESP_FUNC_FAILED
;
1131 PM8001_EH_DBG(pm8001_ha
, pm8001_printk("Query:["));
1132 for (i
= 0; i
< 16; i
++)
1133 printk(KERN_INFO
"%02x ", cmnd
->cmnd
[i
]);
1134 printk(KERN_INFO
"]\n");
1135 tmf_task
.tmf
= TMF_QUERY_TASK
;
1136 tmf_task
.tag_of_task_to_be_managed
= tag
;
1138 rc
= pm8001_issue_ssp_tmf(dev
, lun
.scsi_lun
, &tmf_task
);
1140 /* The task is still in Lun, release it then */
1141 case TMF_RESP_FUNC_SUCC
:
1142 PM8001_EH_DBG(pm8001_ha
,
1143 pm8001_printk("The task is still in Lun\n"));
1145 /* The task is not in Lun or failed, reset the phy */
1146 case TMF_RESP_FUNC_FAILED
:
1147 case TMF_RESP_FUNC_COMPLETE
:
1148 PM8001_EH_DBG(pm8001_ha
,
1149 pm8001_printk("The task is not in Lun or failed,"
1150 " reset the phy\n"));
1154 pm8001_printk(":rc= %d\n", rc
);
1158 /* mandatory SAM-3, still need free task/ccb info, abord the specified task */
1159 int pm8001_abort_task(struct sas_task
*task
)
1161 unsigned long flags
;
1162 u32 tag
= 0xdeadbeef;
1164 struct domain_device
*dev
;
1165 struct pm8001_hba_info
*pm8001_ha
= NULL
;
1166 struct pm8001_ccb_info
*ccb
;
1167 struct scsi_lun lun
;
1168 struct pm8001_device
*pm8001_dev
;
1169 struct pm8001_tmf_task tmf_task
;
1170 int rc
= TMF_RESP_FUNC_FAILED
;
1171 if (unlikely(!task
|| !task
->lldd_task
|| !task
->dev
))
1173 spin_lock_irqsave(&task
->task_state_lock
, flags
);
1174 if (task
->task_state_flags
& SAS_TASK_STATE_DONE
) {
1175 spin_unlock_irqrestore(&task
->task_state_lock
, flags
);
1176 rc
= TMF_RESP_FUNC_COMPLETE
;
1179 spin_unlock_irqrestore(&task
->task_state_lock
, flags
);
1180 if (task
->task_proto
& SAS_PROTOCOL_SSP
) {
1181 struct scsi_cmnd
*cmnd
= task
->uldd_task
;
1183 ccb
= task
->lldd_task
;
1184 pm8001_dev
= dev
->lldd_dev
;
1185 pm8001_ha
= pm8001_find_ha_by_dev(dev
);
1186 int_to_scsilun(cmnd
->device
->lun
, &lun
);
1187 rc
= pm8001_find_tag(task
, &tag
);
1189 printk(KERN_INFO
"No such tag in %s\n", __func__
);
1190 rc
= TMF_RESP_FUNC_FAILED
;
1193 device_id
= pm8001_dev
->device_id
;
1194 PM8001_EH_DBG(pm8001_ha
,
1195 pm8001_printk("abort io to deviceid= %d\n", device_id
));
1196 tmf_task
.tmf
= TMF_ABORT_TASK
;
1197 tmf_task
.tag_of_task_to_be_managed
= tag
;
1198 rc
= pm8001_issue_ssp_tmf(dev
, lun
.scsi_lun
, &tmf_task
);
1199 pm8001_exec_internal_task_abort(pm8001_ha
, pm8001_dev
,
1200 pm8001_dev
->sas_device
, 0, tag
);
1201 } else if (task
->task_proto
& SAS_PROTOCOL_SATA
||
1202 task
->task_proto
& SAS_PROTOCOL_STP
) {
1204 pm8001_dev
= dev
->lldd_dev
;
1205 pm8001_ha
= pm8001_find_ha_by_dev(dev
);
1206 rc
= pm8001_find_tag(task
, &tag
);
1208 printk(KERN_INFO
"No such tag in %s\n", __func__
);
1209 rc
= TMF_RESP_FUNC_FAILED
;
1212 rc
= pm8001_exec_internal_task_abort(pm8001_ha
, pm8001_dev
,
1213 pm8001_dev
->sas_device
, 0, tag
);
1214 } else if (task
->task_proto
& SAS_PROTOCOL_SMP
) {
1217 pm8001_dev
= dev
->lldd_dev
;
1218 pm8001_ha
= pm8001_find_ha_by_dev(dev
);
1219 rc
= pm8001_find_tag(task
, &tag
);
1221 printk(KERN_INFO
"No such tag in %s\n", __func__
);
1222 rc
= TMF_RESP_FUNC_FAILED
;
1225 rc
= pm8001_exec_internal_task_abort(pm8001_ha
, pm8001_dev
,
1226 pm8001_dev
->sas_device
, 0, tag
);
1230 if (rc
!= TMF_RESP_FUNC_COMPLETE
)
1231 pm8001_printk("rc= %d\n", rc
);
1235 int pm8001_abort_task_set(struct domain_device
*dev
, u8
*lun
)
1237 int rc
= TMF_RESP_FUNC_FAILED
;
1238 struct pm8001_tmf_task tmf_task
;
1240 tmf_task
.tmf
= TMF_ABORT_TASK_SET
;
1241 rc
= pm8001_issue_ssp_tmf(dev
, lun
, &tmf_task
);
1245 int pm8001_clear_aca(struct domain_device
*dev
, u8
*lun
)
1247 int rc
= TMF_RESP_FUNC_FAILED
;
1248 struct pm8001_tmf_task tmf_task
;
1250 tmf_task
.tmf
= TMF_CLEAR_ACA
;
1251 rc
= pm8001_issue_ssp_tmf(dev
, lun
, &tmf_task
);
1256 int pm8001_clear_task_set(struct domain_device
*dev
, u8
*lun
)
1258 int rc
= TMF_RESP_FUNC_FAILED
;
1259 struct pm8001_tmf_task tmf_task
;
1260 struct pm8001_device
*pm8001_dev
= dev
->lldd_dev
;
1261 struct pm8001_hba_info
*pm8001_ha
= pm8001_find_ha_by_dev(dev
);
1263 PM8001_EH_DBG(pm8001_ha
,
1264 pm8001_printk("I_T_L_Q clear task set[%x]\n",
1265 pm8001_dev
->device_id
));
1266 tmf_task
.tmf
= TMF_CLEAR_TASK_SET
;
1267 rc
= pm8001_issue_ssp_tmf(dev
, lun
, &tmf_task
);