drivers/usb/misc/ucsi.c

   1 /*
   2  * USB Type-C Connector System Software Interface driver
   3  *
   4  * Copyright (C) 2016, Intel Corporation
   5  * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/platform_device.h>
  13 #include <linux/module.h>
  14 #include <linux/delay.h>
  15 #include <linux/acpi.h>
  16
  17 #include "ucsi.h"
  18
  19 /* Double the time defined by MIN_TIME_TO_RESPOND_WITH_BUSY */
  20 #define UCSI_TIMEOUT_MS 20
  21
  22 enum ucsi_status {
  23         UCSI_IDLE = 0,
  24         UCSI_BUSY,
  25         UCSI_ERROR,
  26 };
  27
  28 struct ucsi_connector {
  29         int num;
  30         struct ucsi *ucsi;
  31         struct work_struct work;
  32         struct ucsi_connector_capability cap;
  33 };
  34
  35 struct ucsi {
  36         struct device *dev;
  37         struct ucsi_data __iomem *data;
  38
  39         enum ucsi_status status;
  40         struct completion complete;
  41         struct ucsi_capability cap;
  42         struct ucsi_connector *connector;
  43
  44         /* device lock */
  45         spinlock_t dev_lock;
  46
  47         /* PPM Communication lock */
  48         struct mutex ppm_lock;
  49
  50         /* PPM communication flags */
  51         unsigned long flags;
  52 #define EVENT_PENDING   0
  53 #define COMMAND_PENDING 1
  54 };
  55
  56 static int ucsi_acpi_cmd(struct ucsi *ucsi, struct ucsi_control *ctrl)
  57 {
  58         uuid_le uuid = UUID_LE(0x6f8398c2, 0x7ca4, 0x11e4,
  59                                0xad, 0x36, 0x63, 0x10, 0x42, 0xb5, 0x00, 0x8f);
  60         union acpi_object *obj;
  61
  62         ucsi->data->ctrl.raw_cmd = ctrl->raw_cmd;
  63
  64         obj = acpi_evaluate_dsm(ACPI_HANDLE(ucsi->dev), uuid.b, 1, 1, NULL);
  65         if (!obj) {
  66                 dev_err(ucsi->dev, "%s: failed to evaluate _DSM\n", __func__);
  67                 return -EIO;
  68         }
  69
  70         ACPI_FREE(obj);
  71         return 0;
  72 }
  73
  74 static void ucsi_acpi_notify(acpi_handle handle, u32 event, void *data)
  75 {
  76         struct ucsi *ucsi = data;
  77         struct ucsi_cci *cci;
  78
  79         spin_lock(&ucsi->dev_lock);
  80
  81         ucsi->status = UCSI_IDLE;
  82         cci = &ucsi->data->cci;
  83
  84         /*
  85          * REVISIT: This is not documented behavior, but all known PPMs ACK
  86          * asynchronous events by sending notification with cleared CCI.
  87          */
  88         if (!ucsi->data->raw_cci) {
  89                 if (test_bit(EVENT_PENDING, &ucsi->flags))
  90                         complete(&ucsi->complete);
  91                 else
  92                         dev_WARN(ucsi->dev, "spurious notification\n");
  93                 goto out_unlock;
  94         }
  95
  96         if (test_bit(COMMAND_PENDING, &ucsi->flags)) {
  97                 if (cci->busy) {
  98                         ucsi->status = UCSI_BUSY;
  99                         complete(&ucsi->complete);
 100
 101                         goto out_unlock;
 102                 } else if (cci->ack_complete || cci->cmd_complete) {
 103                         /* Error Indication is only valid with commands */
 104                         if (cci->error && cci->cmd_complete)
 105                                 ucsi->status = UCSI_ERROR;
 106
 107                         ucsi->data->ctrl.raw_cmd = 0;
 108                         complete(&ucsi->complete);
 109                 }
 110         }
 111
 112         if (cci->connector_change) {
 113                 struct ucsi_connector *con;
 114
 115                 /*
 116                  * This is workaround for buggy PPMs that create asynchronous
 117                  * event notifications before OPM has enabled them.
 118                  */
 119                 if (!ucsi->connector)
 120                         goto out_unlock;
 121
 122                 con = ucsi->connector + (cci->connector_change - 1);
 123
 124                 /*
 125                  * PPM will not clear the connector specific bit in Connector
 126                  * Change Indication field of CCI until the driver has ACK it,
 127                  * and the driver can not ACK it before it has been processed.
 128                  * The PPM will not generate new events before the first has
 129                  * been acknowledged, even if they are for an other connector.
 130                  * So only one event at a time.
 131                  */
 132                 if (!test_and_set_bit(EVENT_PENDING, &ucsi->flags))
 133                         schedule_work(&con->work);
 134         }
 135 out_unlock:
 136         spin_unlock(&ucsi->dev_lock);
 137 }
 138
 139 static int ucsi_ack(struct ucsi *ucsi, u8 cmd)
 140 {
 141         struct ucsi_control ctrl;
 142         int ret;
 143
 144         ctrl.cmd.cmd = UCSI_ACK_CC_CI;
 145         ctrl.cmd.length = 0;
 146         ctrl.cmd.data = cmd;
 147         ret = ucsi_acpi_cmd(ucsi, &ctrl);
 148         if (ret)
 149                 return ret;
 150
 151         /* Waiting for ACK also with ACK CMD for now */
 152         ret = wait_for_completion_timeout(&ucsi->complete,
 153                                           msecs_to_jiffies(UCSI_TIMEOUT_MS));
 154         if (!ret)
 155                 return -ETIMEDOUT;
 156         return 0;
 157 }
 158
 159 static int ucsi_run_cmd(struct ucsi *ucsi, struct ucsi_control *ctrl,
 160                         void *data, size_t size)
 161 {
 162         u16 err_value = 0;
 163         int ret;
 164
 165         set_bit(COMMAND_PENDING, &ucsi->flags);
 166
 167         ret = ucsi_acpi_cmd(ucsi, ctrl);
 168         if (ret)
 169                 goto err_clear_flag;
 170
 171         ret = wait_for_completion_timeout(&ucsi->complete,
 172                                           msecs_to_jiffies(UCSI_TIMEOUT_MS));
 173         if (!ret) {
 174                 ret = -ETIMEDOUT;
 175                 goto err_clear_flag;
 176         }
 177
 178         switch (ucsi->status) {
 179         case UCSI_IDLE:
 180                 if (data)
 181                         memcpy(data, ucsi->data->message_in, size);
 182
 183                 ret = ucsi_ack(ucsi, UCSI_ACK_CMD);
 184                 break;
 185         case UCSI_BUSY:
 186                 /* The caller decides whether to cancel or not */
 187                 ret = -EBUSY;
 188                 goto err_clear_flag;
 189         case UCSI_ERROR:
 190                 ret = ucsi_ack(ucsi, UCSI_ACK_CMD);
 191                 if (ret)
 192                         goto err_clear_flag;
 193
 194                 ctrl->cmd.cmd = UCSI_GET_ERROR_STATUS;
 195                 ctrl->cmd.length = 0;
 196                 ctrl->cmd.data = 0;
 197                 ret = ucsi_acpi_cmd(ucsi, ctrl);
 198                 if (ret)
 199                         goto err_clear_flag;
 200
 201                 ret = wait_for_completion_timeout(&ucsi->complete,
 202                                         msecs_to_jiffies(UCSI_TIMEOUT_MS));
 203                 if (!ret) {
 204                         ret = -ETIMEDOUT;
 205                         goto err_clear_flag;
 206                 }
 207
 208                 memcpy(&err_value, ucsi->data->message_in, sizeof(err_value));
 209
 210                 /* Something has really gone wrong */
 211                 if (WARN_ON(ucsi->status == UCSI_ERROR)) {
 212                         ret = -ENODEV;
 213                         goto err_clear_flag;
 214                 }
 215
 216                 ret = ucsi_ack(ucsi, UCSI_ACK_CMD);
 217                 if (ret)
 218                         goto err_clear_flag;
 219
 220                 switch (err_value) {
 221                 case UCSI_ERROR_INCOMPATIBLE_PARTNER:
 222                         ret = -EOPNOTSUPP;
 223                         break;
 224                 case UCSI_ERROR_CC_COMMUNICATION_ERR:
 225                         ret = -ECOMM;
 226                         break;
 227                 case UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL:
 228                         ret = -EIO;
 229                         break;
 230                 case UCSI_ERROR_DEAD_BATTERY:
 231                         dev_warn(ucsi->dev, "Dead battery condition!\n");
 232                         ret = -EPERM;
 233                         break;
 234                 /* The following mean a bug in this driver */
 235                 case UCSI_ERROR_INVALID_CON_NUM:
 236                 case UCSI_ERROR_UNREGONIZED_CMD:
 237                 case UCSI_ERROR_INVALID_CMD_ARGUMENT:
 238                 default:
 239                         dev_warn(ucsi->dev,
 240                                  "%s: possible UCSI driver bug - error %hu\n",
 241                                  __func__, err_value);
 242                         ret = -EINVAL;
 243                         break;
 244                 }
 245                 break;
 246         }
 247         ctrl->raw_cmd = 0;
 248 err_clear_flag:
 249         clear_bit(COMMAND_PENDING, &ucsi->flags);
 250         return ret;
 251 }
 252
 253 static void ucsi_connector_change(struct work_struct *work)
 254 {
 255         struct ucsi_connector *con = container_of(work, struct ucsi_connector,
 256                                                   work);
 257         struct ucsi_connector_status constat;
 258         struct ucsi *ucsi = con->ucsi;
 259         struct ucsi_control ctrl;
 260         int ret;
 261
 262         mutex_lock(&ucsi->ppm_lock);
 263
 264         ctrl.cmd.cmd = UCSI_GET_CONNECTOR_STATUS;
 265         ctrl.cmd.length = 0;
 266         ctrl.cmd.data = con->num;
 267         ret = ucsi_run_cmd(con->ucsi, &ctrl, &constat, sizeof(constat));
 268         if (ret) {
 269                 dev_err(ucsi->dev, "%s: failed to read connector status (%d)\n",
 270                         __func__, ret);
 271                 goto out_ack_event;
 272         }
 273
 274         /* Ignoring disconnections and Alternate Modes */
 275         if (!constat.connected || !(constat.change &
 276             (UCSI_CONSTAT_PARTNER_CHANGE | UCSI_CONSTAT_CONNECT_CHANGE)) ||
 277             constat.partner_flags & UCSI_CONSTAT_PARTNER_FLAG_ALT_MODE)
 278                 goto out_ack_event;
 279
 280         /* If the partner got USB Host role, attempting swap */
 281         if (constat.partner_type & UCSI_CONSTAT_PARTNER_TYPE_DFP) {
 282                 ctrl.uor.cmd = UCSI_SET_UOR;
 283                 ctrl.uor.con_num = con->num;
 284                 ctrl.uor.role = UCSI_UOR_ROLE_DFP;
 285
 286                 ret = ucsi_run_cmd(con->ucsi, &ctrl, NULL, 0);
 287                 if (ret)
 288                         dev_err(ucsi->dev, "%s: failed to swap role (%d)\n",
 289                                 __func__, ret);
 290         }
 291 out_ack_event:
 292         ucsi_ack(ucsi, UCSI_ACK_EVENT);
 293         clear_bit(EVENT_PENDING, &ucsi->flags);
 294         mutex_unlock(&ucsi->ppm_lock);
 295 }
 296
 297 static int ucsi_reset_ppm(struct ucsi *ucsi)
 298 {
 299         int timeout = UCSI_TIMEOUT_MS;
 300         struct ucsi_control ctrl;
 301         int ret;
 302
 303         memset(&ctrl, 0, sizeof(ctrl));
 304         ctrl.cmd.cmd = UCSI_PPM_RESET;
 305         ret = ucsi_acpi_cmd(ucsi, &ctrl);
 306         if (ret)
 307                 return ret;
 308
 309         /* There is no quarantee the PPM will ever set the RESET_COMPLETE bit */
 310         while (!ucsi->data->cci.reset_complete && timeout--)
 311                 usleep_range(1000, 2000);
 312         return 0;
 313 }
 314
 315 static int ucsi_init(struct ucsi *ucsi)
 316 {
 317         struct ucsi_connector *con;
 318         struct ucsi_control ctrl;
 319         int ret;
 320         int i;
 321
 322         init_completion(&ucsi->complete);
 323         spin_lock_init(&ucsi->dev_lock);
 324         mutex_init(&ucsi->ppm_lock);
 325
 326         /* Reset the PPM */
 327         ret = ucsi_reset_ppm(ucsi);
 328         if (ret)
 329                 return ret;
 330
 331         /*
 332          * REVISIT: Executing second reset to WA an issue seen on some of the
 333          * Broxton based platforms, where the first reset puts the PPM into a
 334          * state where it's unable to recognise some of the commands.
 335          */
 336         ret = ucsi_reset_ppm(ucsi);
 337         if (ret)
 338                 return ret;
 339
 340         mutex_lock(&ucsi->ppm_lock);
 341
 342         /* Enable basic notifications */
 343         ctrl.cmd.cmd = UCSI_SET_NOTIFICATION_ENABLE;
 344         ctrl.cmd.length = 0;
 345         ctrl.cmd.data = UCSI_ENABLE_NTFY_CMD_COMPLETE | UCSI_ENABLE_NTFY_ERROR;
 346         ret = ucsi_run_cmd(ucsi, &ctrl, NULL, 0);
 347         if (ret)
 348                 goto err_reset;
 349
 350         /* Get PPM capabilities */
 351         ctrl.cmd.cmd = UCSI_GET_CAPABILITY;
 352         ret = ucsi_run_cmd(ucsi, &ctrl, &ucsi->cap, sizeof(ucsi->cap));
 353         if (ret)
 354                 goto err_reset;
 355
 356         if (!ucsi->cap.num_connectors) {
 357                 ret = -ENODEV;
 358                 goto err_reset;
 359         }
 360
 361         ucsi->connector = devm_kcalloc(ucsi->dev, ucsi->cap.num_connectors,
 362                                        sizeof(*ucsi->connector), GFP_KERNEL);
 363         if (!ucsi->connector) {
 364                 ret = -ENOMEM;
 365                 goto err_reset;
 366         }
 367
 368         for (i = 1, con = ucsi->connector; i < ucsi->cap.num_connectors + 1;
 369              i++, con++) {
 370                 /* Get connector capability */
 371                 ctrl.cmd.cmd = UCSI_GET_CONNECTOR_CAPABILITY;
 372                 ctrl.cmd.data = i;
 373                 ret = ucsi_run_cmd(ucsi, &ctrl, &con->cap, sizeof(con->cap));
 374                 if (ret)
 375                         goto err_reset;
 376
 377                 con->num = i;
 378                 con->ucsi = ucsi;
 379                 INIT_WORK(&con->work, ucsi_connector_change);
 380         }
 381
 382         /* Enable all notifications */
 383         ctrl.cmd.cmd = UCSI_SET_NOTIFICATION_ENABLE;
 384         ctrl.cmd.data = UCSI_ENABLE_NTFY_ALL;
 385         ret = ucsi_run_cmd(ucsi, &ctrl, NULL, 0);
 386         if (ret < 0)
 387                 goto err_reset;
 388
 389         mutex_unlock(&ucsi->ppm_lock);
 390         return 0;
 391 err_reset:
 392         ucsi_reset_ppm(ucsi);
 393         mutex_unlock(&ucsi->ppm_lock);
 394         return ret;
 395 }
 396
 397 static int ucsi_acpi_probe(struct platform_device *pdev)
 398 {
 399         struct resource *res;
 400         acpi_status status;
 401         struct ucsi *ucsi;
 402         int ret;
 403
 404         ucsi = devm_kzalloc(&pdev->dev, sizeof(*ucsi), GFP_KERNEL);
 405         if (!ucsi)
 406                 return -ENOMEM;
 407
 408         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 409         if (!res) {
 410                 dev_err(&pdev->dev, "missing memory resource\n");
 411                 return -ENODEV;
 412         }
 413
 414         /*
 415          * NOTE: ACPI has claimed the memory region as it's also an Operation
 416          * Region. It's not possible to request it in the driver.
 417          */
 418         ucsi->data = devm_ioremap(&pdev->dev, res->start, resource_size(res));
 419         if (!ucsi->data)
 420                 return -ENOMEM;
 421
 422         ucsi->dev = &pdev->dev;
 423
 424         status = acpi_install_notify_handler(ACPI_HANDLE(&pdev->dev),
 425                                              ACPI_ALL_NOTIFY,
 426                                              ucsi_acpi_notify, ucsi);
 427         if (ACPI_FAILURE(status))
 428                 return -ENODEV;
 429
 430         ret = ucsi_init(ucsi);
 431         if (ret) {
 432                 acpi_remove_notify_handler(ACPI_HANDLE(&pdev->dev),
 433                                            ACPI_ALL_NOTIFY,
 434                                            ucsi_acpi_notify);
 435                 return ret;
 436         }
 437
 438         platform_set_drvdata(pdev, ucsi);
 439         return 0;
 440 }
 441
 442 static int ucsi_acpi_remove(struct platform_device *pdev)
 443 {
 444         struct ucsi *ucsi = platform_get_drvdata(pdev);
 445
 446         acpi_remove_notify_handler(ACPI_HANDLE(&pdev->dev),
 447                                    ACPI_ALL_NOTIFY, ucsi_acpi_notify);
 448
 449         /* Make sure there are no events in the middle of being processed */
 450         if (wait_on_bit_timeout(&ucsi->flags, EVENT_PENDING,
 451                                 TASK_UNINTERRUPTIBLE,
 452                                 msecs_to_jiffies(UCSI_TIMEOUT_MS)))
 453                 dev_WARN(ucsi->dev, "%s: Events still pending\n", __func__);
 454
 455         ucsi_reset_ppm(ucsi);
 456         return 0;
 457 }
 458
 459 static const struct acpi_device_id ucsi_acpi_match[] = {
 460         { "PNP0CA0", 0 },
 461         { },
 462 };
 463 MODULE_DEVICE_TABLE(acpi, ucsi_acpi_match);
 464
 465 static struct platform_driver ucsi_acpi_platform_driver = {
 466         .driver = {
 467                 .name = "ucsi_acpi",
 468                 .acpi_match_table = ACPI_PTR(ucsi_acpi_match),
 469         },
 470         .probe = ucsi_acpi_probe,
 471         .remove = ucsi_acpi_remove,
 472 };
 473
 474 module_platform_driver(ucsi_acpi_platform_driver);
 475
 476 MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
 477 MODULE_LICENSE("GPL v2");
 478 MODULE_DESCRIPTION("USB Type-C System Software Interface (UCSI) driver");