arch/arm/boot/dts/bcm958623hr.dts

   1 /*
   2  *  BSD LICENSE
   3  *
   4  *  Copyright(c) 2016 Broadcom.  All rights reserved.
   5  *
   6  *  Redistribution and use in source and binary forms, with or without
   7  *  modification, are permitted provided that the following conditions
   8  *  are met:
   9  *
  10  *    * Redistributions of source code must retain the above copyright
  11  *      notice, this list of conditions and the following disclaimer.
  12  *    * Redistributions in binary form must reproduce the above copyright
  13  *      notice, this list of conditions and the following disclaimer in
  14  *      the documentation and/or other materials provided with the
  15  *      distribution.
  16  *    * Neither the name of Broadcom Corporation nor the names of its
  17  *      contributors may be used to endorse or promote products derived
  18  *      from this software without specific prior written permission.
  19  *
  20  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  21  *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  22  *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  23  *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  24  *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  25  *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  26  *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  27  *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  28  *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  29  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  30  *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  31  */
  32
  33 /dts-v1/;
  34
  35 #include "bcm-nsp.dtsi"
  36 #include <dt-bindings/gpio/gpio.h>
  37
  38 / {
  39         model = "NorthStar Plus SVK (BCM958623HR)";
  40         compatible = "brcm,bcm58623", "brcm,nsp";
  41
  42         chosen {
  43                 stdout-path = "serial0:115200n8";
  44         };
  45
  46         memory {
  47                 device_type = "memory";
  48                 reg = <0x60000000 0x80000000>;
  49         };
  50
  51         gpio-restart {
  52                 compatible = "gpio-restart";
  53                 gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
  54                 open-source;
  55                 priority = <200>;
  56         };
  57 };
  58
  59 /* USB 3 and SLIC support needed to be complete */
  60
  61 &amac0 {
  62         status = "okay";
  63 };
  64
  65 &amac1 {
  66         status = "okay";
  67 };
  68
  69 &amac2 {
  70         status = "okay";
  71 };
  72
  73 &ehci0 {
  74         status = "okay";
  75 };
  76
  77 &nand {
  78         nandcs@0 {
  79                 compatible = "brcm,nandcs";
  80                 reg = <0>;
  81                 nand-on-flash-bbt;
  82
  83                 #address-cells = <1>;
  84                 #size-cells = <1>;
  85
  86                 nand-ecc-strength = <24>;
  87                 nand-ecc-step-size = <1024>;
  88
  89                 brcm,nand-oob-sector-size = <27>;
  90
  91                 partition@0 {
  92                         label = "nboot";
  93                         reg = <0x00000000 0x00200000>;
  94                         read-only;
  95                 };
  96                 partition@200000 {
  97                         label = "nenv";
  98                         reg = <0x00200000 0x00400000>;
  99                 };
 100                 partition@600000 {
 101                         label = "nsystem";
 102                         reg = <0x00600000 0x00a00000>;
 103                 };
 104                 partition@1000000 {
 105                         label = "nrootfs";
 106                         reg = <0x01000000 0x03000000>;
 107                 };
 108                 partition@4000000 {
 109                         label = "ncustfs";
 110                         reg = <0x04000000 0x3c000000>;
 111                 };
 112         };
 113 };
 114
 115 &ohci0 {
 116         status = "okay";
 117 };
 118
 119 &pcie0 {
 120         status = "okay";
 121 };
 122
 123 &pcie1 {
 124         status = "okay";
 125 };
 126
 127 &pinctrl {
 128         pinctrl-names = "default";
 129         pinctrl-0 = <&nand_sel>;
 130         nand_sel: nand_sel {
 131                 function = "nand";
 132                 groups = "nand_grp";
 133         };
 134 };
 135
 136 &sata_phy0 {
 137         status = "okay";
 138 };
 139
 140 &qspi {
 141         bspi-sel = <0>;
 142         flash: m25p80@0 {
 143                 #address-cells = <1>;
 144                 #size-cells = <1>;
 145                 compatible = "m25p80";
 146                 reg = <0x0>;
 147                 spi-max-frequency = <12500000>;
 148                 m25p,fast-read;
 149                 spi-cpol;
 150                 spi-cpha;
 151
 152                 partition@0 {
 153                         label = "boot";
 154                         reg = <0x00000000 0x000a0000>;
 155                 };
 156
 157                 partition@a0000 {
 158                         label = "env";
 159                         reg = <0x000a0000 0x00060000>;
 160                 };
 161
 162                 partition@100000 {
 163                         label = "system";
 164                         reg = <0x00100000 0x00600000>;
 165                 };
 166
 167                 partition@700000 {
 168                         label = "rootfs";
 169                         reg = <0x00700000 0x01900000>;
 170                 };
 171         };
 172 };
 173
 174 &srab {
 175         compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
 176         status = "okay";
 177
 178         ports {
 179                 #address-cells = <1>;
 180                 #size-cells = <0>;
 181
 182                 port@0 {
 183                         label = "port0";
 184                         reg = <0>;
 185                 };
 186
 187                 port@1 {
 188                         label = "port1";
 189                         reg = <1>;
 190                 };
 191
 192                 port@2 {
 193                         label = "port2";
 194                         reg = <2>;
 195                 };
 196
 197                 port@3 {
 198                         label = "port3";
 199                         reg = <3>;
 200                 };
 201
 202                 port@4 {
 203                         label = "port4";
 204                         reg = <4>;
 205                 };
 206
 207                 port@8 {
 208                         ethernet = <&amac2>;
 209                         label = "cpu";
 210                         reg = <8>;
 211                         fixed-link {
 212                                 speed = <1000>;
 213                                 full-duplex;
 214                         };
 215                 };
 216         };
 217 };
 218
 219 &uart0 {
 220         status = "okay";
 221 };
 222
 223 &usb3_phy {
 224         status = "okay";
 225 };
 226
 227 &xhci {
 228         status = "okay";
 229 };