arch/arm/boot/dts/imx35-pdk.dts

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
   4 // Copyright 2014 Freescale Semiconductor, Inc.
   5
   6 /dts-v1/;
   7 #include "imx35.dtsi"
   8
   9 / {
  10         model = "Freescale i.MX35 Product Development Kit";
  11         compatible = "fsl,imx35-pdk", "fsl,imx35";
  12
  13         memory@80000000 {
  14                 device_type = "memory";
  15                 reg = <0x80000000 0x8000000>,
  16                       <0x90000000 0x8000000>;
  17         };
  18 };
  19
  20 &esdhc1 {
  21         pinctrl-names = "default";
  22         pinctrl-0 = <&pinctrl_esdhc1>;
  23         status = "okay";
  24 };
  25
  26 &iomuxc {
  27         imx35-pdk {
  28                 pinctrl_esdhc1: esdhc1grp {
  29                         fsl,pins = <
  30                                 MX35_PAD_SD1_CMD__ESDHC1_CMD            0x80000000
  31                                 MX35_PAD_SD1_CLK__ESDHC1_CLK            0x80000000
  32                                 MX35_PAD_SD1_DATA0__ESDHC1_DAT0         0x80000000
  33                                 MX35_PAD_SD1_DATA1__ESDHC1_DAT1         0x80000000
  34                                 MX35_PAD_SD1_DATA2__ESDHC1_DAT2         0x80000000
  35                                 MX35_PAD_SD1_DATA3__ESDHC1_DAT3         0x80000000
  36                         >;
  37                 };
  38
  39                 pinctrl_uart1: uart1grp {
  40                         fsl,pins = <
  41                                 MX35_PAD_TXD1__UART1_TXD_MUX            0x1c5
  42                                 MX35_PAD_RXD1__UART1_RXD_MUX            0x1c5
  43                                 MX35_PAD_CTS1__UART1_CTS                0x1c5
  44                                 MX35_PAD_RTS1__UART1_RTS                0x1c5
  45                         >;
  46                 };
  47         };
  48 };
  49
  50 &nfc {
  51         nand-bus-width = <16>;
  52         nand-ecc-mode = "hw";
  53         nand-on-flash-bbt;
  54         status = "okay";
  55 };
  56
  57 &uart1 {
  58         pinctrl-names = "default";
  59         pinctrl-0 = <&pinctrl_uart1>;
  60         uart-has-rtscts;
  61         status = "okay";
  62 };