mtd: nand: omap: Fix comment in platform data using wrong Kconfig symbol
[linux/fpc-iii.git] / arch / arm / boot / dts / imx51-apf51.dts
blob1eddf2908b3f2962d46d32245d618f243cb794ef
1 /*
2  * Copyright 2012 Armadeus Systems - <support@armadeus.com>
3  * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
4  *
5  * Based on mx51-babbage.dts
6  * Copyright 2011 Freescale Semiconductor, Inc.
7  * Copyright 2011 Linaro Ltd.
8  *
9  * The code contained herein is licensed under the GNU General Public
10  * License. You may obtain a copy of the GNU General Public License
11  * Version 2 or later at the following locations:
12  *
13  * http://www.opensource.org/licenses/gpl-license.html
14  * http://www.gnu.org/copyleft/gpl.html
15  */
17 /dts-v1/;
18 #include "imx51.dtsi"
20 / {
21         model = "Armadeus Systems APF51 module";
22         compatible = "armadeus,imx51-apf51", "fsl,imx51";
24         memory@90000000 {
25                 device_type = "memory";
26                 reg = <0x90000000 0x20000000>;
27         };
29         clocks {
30                 osc {
31                         clock-frequency = <33554432>;
32                 };
33         };
36 &fec {
37         pinctrl-names = "default";
38         pinctrl-0 = <&pinctrl_fec>;
39         phy-mode = "mii";
40         phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
41         phy-reset-duration = <1>;
42         status = "okay";
45 &iomuxc {
46         imx51-apf51 {
47                 pinctrl_fec: fecgrp {
48                         fsl,pins = <
49                                 MX51_PAD_DI_GP3__FEC_TX_ER              0x80000000
50                                 MX51_PAD_DI2_PIN4__FEC_CRS              0x80000000
51                                 MX51_PAD_DI2_PIN2__FEC_MDC              0x80000000
52                                 MX51_PAD_DI2_PIN3__FEC_MDIO             0x80000000
53                                 MX51_PAD_DI2_DISP_CLK__FEC_RDATA1       0x80000000
54                                 MX51_PAD_DI_GP4__FEC_RDATA2             0x80000000
55                                 MX51_PAD_DISP2_DAT0__FEC_RDATA3         0x80000000
56                                 MX51_PAD_DISP2_DAT1__FEC_RX_ER          0x80000000
57                                 MX51_PAD_DISP2_DAT6__FEC_TDATA1         0x80000000
58                                 MX51_PAD_DISP2_DAT7__FEC_TDATA2         0x80000000
59                                 MX51_PAD_DISP2_DAT8__FEC_TDATA3         0x80000000
60                                 MX51_PAD_DISP2_DAT9__FEC_TX_EN          0x80000000
61                                 MX51_PAD_DISP2_DAT10__FEC_COL           0x80000000
62                                 MX51_PAD_DISP2_DAT11__FEC_RX_CLK        0x80000000
63                                 MX51_PAD_DISP2_DAT12__FEC_RX_DV         0x80000000
64                                 MX51_PAD_DISP2_DAT13__FEC_TX_CLK        0x80000000
65                                 MX51_PAD_DISP2_DAT14__FEC_RDATA0        0x80000000
66                                 MX51_PAD_DISP2_DAT15__FEC_TDATA0        0x80000000
67                         >;
68                 };
70                 pinctrl_uart3: uart3grp {
71                         fsl,pins = <
72                                 MX51_PAD_UART3_RXD__UART3_RXD           0x1c5
73                                 MX51_PAD_UART3_TXD__UART3_TXD           0x1c5
74                         >;
75                 };
76         };
79 &nfc {
80         nand-bus-width = <8>;
81         nand-ecc-mode = "hw";
82         nand-on-flash-bbt;
83         status = "okay";
86 &uart3 {
87         pinctrl-names = "default";
88         pinctrl-0 = <&pinctrl_uart3>;
89         status = "okay";