arch/arm/boot/dts/imx6qdl-ts7970.dtsi

   1 /*
   2  * Copyright 2015 Technologic Systems
   3  * Copyright 2017 Savoir-Faire Linux
   4  *
   5  * This file is dual-licensed: you can use it either under the terms
   6  * of the GPL or the X11 license, at your option. Note that this dual
   7  * licensing only applies to this file, and not this project as a
   8  * whole.
   9  *
  10  *  a) This file is free software; you can redistribute it and/or
  11  *     modify it under the terms of the GNU General Public License
  12  *     version 2 as published by the Free Software Foundation.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  * Or, alternatively,
  20  *
  21  *  b) Permission is hereby granted, free of charge, to any person
  22  *     obtaining a copy of this software and associated documentation
  23  *     files (the "Software"), to deal in the Software without
  24  *     restriction, including without limitation the rights to use,
  25  *     copy, modify, merge, publish, distribute, sublicense, and/or
  26  *     sell copies of the Software, and to permit persons to whom the
  27  *     Software is furnished to do so, subject to the following
  28  *     conditions:
  29  *
  30  *     The above copyright notice and this permission notice shall be
  31  *     included in all copies or substantial portions of the Software.
  32  *
  33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  40  *     OTHER DEALINGS IN THE SOFTWARE.
  41  */
  42
  43 #include <dt-bindings/gpio/gpio.h>
  44 #include <dt-bindings/interrupt-controller/irq.h>
  45
  46 / {
  47         leds {
  48                 pinctrl-names = "default";
  49                 pinctrl-0 = <&pinctrl_leds1>;
  50                 compatible = "gpio-leds";
  51
  52                 green-led {
  53                         label = "green-led";
  54                         gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
  55                         default-state = "on";
  56                 };
  57
  58                 red-led {
  59                         label = "red-led";
  60                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
  61                         default-state = "off";
  62                 };
  63
  64                 yel-led {
  65                         label = "yellow-led";
  66                         gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
  67                         default-state = "off";
  68                 };
  69
  70                 blue-led {
  71                         label = "blue-led";
  72                         gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
  73                         default-state = "off";
  74                 };
  75
  76                 en-usb-5v {
  77                         label = "en-usb-5v";
  78                         gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
  79                         default-state = "on";
  80                 };
  81
  82                 sel_dc_usb {
  83                         label = "sel_dc_usb";
  84                         gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
  85                         default-state = "off";
  86                 };
  87
  88         };
  89
  90         reg_3p3v: regulator-3p3v {
  91                 compatible = "regulator-fixed";
  92                 regulator-name = "3p3v";
  93                 regulator-min-microvolt = <3300000>;
  94                 regulator-max-microvolt = <3300000>;
  95                 regulator-always-on;
  96         };
  97
  98         reg_can1_3v3: reg_can1_3v3 {
  99                 compatible = "regulator-fixed";
 100                 regulator-name = "reg_can1_3v3";
 101                 regulator-min-microvolt = <3300000>;
 102                 regulator-max-microvolt = <3300000>;
 103                 gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 104                 enable-active-high;
 105         };
 106
 107         reg_can2_3v3: en-reg_can2_3v3 {
 108                 compatible = "regulator-fixed";
 109                 regulator-name = "reg_can2_3v3";
 110                 regulator-min-microvolt = <3300000>;
 111                 regulator-max-microvolt = <3300000>;
 112                 gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
 113                 enable-active-high;
 114         };
 115
 116         reg_usb_otg_vbus: regulator-usb-otg-vbus {
 117                 compatible = "regulator-fixed";
 118                 regulator-name = "usb_otg_vbus";
 119                 regulator-min-microvolt = <5000000>;
 120                 regulator-max-microvolt = <5000000>;
 121                 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 122                 enable-active-high;
 123         };
 124
 125         reg_wlan_vmmc: regulator_wlan_vmmc {
 126                 compatible = "regulator-fixed";
 127                 regulator-name = "wlan_vmmc";
 128                 regulator-min-microvolt = <1800000>;
 129                 regulator-max-microvolt = <1800000>;
 130                 gpio = <&gpio8 14 GPIO_ACTIVE_HIGH>;
 131                 startup-delay-us = <70000>;
 132                 enable-active-high;
 133         };
 134
 135         sound-sgtl5000 {
 136                 audio-codec = <&sgtl5000>;
 137                 audio-routing =
 138                         "MIC_IN", "Mic Jack",
 139                         "Mic Jack", "Mic Bias",
 140                         "Headphone Jack", "HP_OUT";
 141                 compatible = "fsl,imx-audio-sgtl5000";
 142                 model = "On-board Codec";
 143                 mux-ext-port = <3>;
 144                 mux-int-port = <1>;
 145                 ssi-controller = <&ssi1>;
 146         };
 147 };
 148
 149 &audmux {
 150         status = "okay";
 151 };
 152
 153 &can1 {
 154         pinctrl-names = "default";
 155         pinctrl-0 = <&pinctrl_flexcan1>;
 156         xceiver-supply = <&reg_can1_3v3>;
 157         status = "okay";
 158 };
 159
 160 &can2 {
 161         pinctrl-names = "default";
 162         pinctrl-0 = <&pinctrl_flexcan2>;
 163         xceiver-supply = <&reg_can2_3v3>;
 164         status = "okay";
 165 };
 166
 167 &ecspi1 {
 168         cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 169         pinctrl-names = "default";
 170         pinctrl-0 = <&pinctrl_ecspi1>;
 171         status = "okay";
 172
 173         n25q064: flash@0 {
 174                 compatible = "micron,n25q064", "jedec,spi-nor";
 175                 reg = <0>;
 176                 spi-max-frequency = <20000000>;
 177         };
 178 };
 179
 180 &ecspi2 {
 181         cs-gpios = <
 182                 &gpio5 31 GPIO_ACTIVE_HIGH
 183                 &gpio7 12 GPIO_ACTIVE_HIGH
 184                 &gpio5 18 GPIO_ACTIVE_HIGH
 185         >;
 186         pinctrl-names = "default";
 187         pinctrl-0 = <&pinctrl_ecspi2>;
 188         status = "okay";
 189 };
 190
 191 &fec {
 192         pinctrl-names = "default";
 193         pinctrl-0 = <&pinctrl_enet>;
 194         phy-mode = "rgmii";
 195         interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 196                               <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 197         fsl,err006687-workaround-present;
 198         status = "okay";
 199 };
 200
 201 &hdmi {
 202         status = "okay";
 203 };
 204
 205 &i2c1 {
 206         clock-frequency = <100000>;
 207         pinctrl-names = "default", "gpio";
 208         pinctrl-0 = <&pinctrl_i2c1>;
 209         pinctrl-1 = <&pinctrl_i2c1_gpio>;
 210         scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 211         sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
 212         status = "okay";
 213
 214         m41t00s: rtc@68 {
 215                 compatible = "m41t00";
 216                 reg = <0x68>;
 217         };
 218
 219         isl12022: rtc@6f {
 220                 compatible = "isl,isl12022";
 221                 reg = <0x6f>;
 222         };
 223
 224         gpio8: gpio@28 {
 225                 compatible = "technologic,ts7970-gpio";
 226                 reg = <0x28>;
 227                 #gpio-cells = <2>;
 228                 gpio-controller;
 229                 ngpio = <32>;
 230         };
 231
 232         sgtl5000: codec@a {
 233                 compatible = "fsl,sgtl5000";
 234                 pinctrl-names = "default";
 235                 pinctrl-0 = <&pinctrl_sgtl5000>;
 236                 reg = <0x0a>;
 237                 clocks = <&clks IMX6QDL_CLK_CKO>;
 238                 VDDA-supply = <&reg_3p3v>;
 239                 VDDIO-supply = <&reg_3p3v>;
 240         };
 241 };
 242
 243 &i2c2 {
 244         clock-frequency = <100000>;
 245         pinctrl-names = "default", "gpio";
 246         pinctrl-0 = <&pinctrl_i2c2>;
 247         pinctrl-1 = <&pinctrl_i2c2_gpio>;
 248         scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
 249         sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
 250         status = "okay";
 251 };
 252
 253 &iomuxc {
 254         pinctrl-names = "default";
 255         pinctrl-0 = <&pinctrl_hog>;
 256
 257         pinctrl_ecspi1: ecspi1grp {
 258                 fsl,pins = <
 259                         MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
 260                         MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
 261                         MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
 262                         MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x100b1 /* Onboard Flash CS */
 263                 >;
 264         };
 265
 266         pinctrl_ecspi2: ecspi2 {
 267                 fsl,pins = <
 268                         MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK      0x100b1
 269                         MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI      0x100b1
 270                         MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO     0x100b1
 271                         MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31      0x100b1 /* FPGA_SPI_CS0 */
 272                         MX6QDL_PAD_GPIO_17__GPIO7_IO12         0x100b1 /* FPGA_SPI_CS1 */
 273                         MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18     0x100b1 /* HD1_SPI_CS */
 274                         MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21      0x1b088 /* FPGA_RESET */
 275                         MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x10    /* FPGA 24MHZ */
 276                         MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20    0x1b088 /* FPGA_IRQ_0 */
 277                         MX6QDL_PAD_GPIO_4__GPIO1_IO04          0x1b088 /* FPGA_IRQ_1 */
 278                 >;
 279         };
 280
 281         pinctrl_enet: enet {
 282                 fsl,pins = <
 283                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 284                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 285                         MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b0b0
 286                         MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b0b0
 287                         MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b0b0
 288                         MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b0b0
 289                         MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b0b0
 290                         MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b0b0
 291                         MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b0b0
 292                         MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b0b0
 293                         MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b0b0
 294                         MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b0b0
 295                         MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b0b0
 296                         MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b0b0
 297                         MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 298                         MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28       0x1b088
 299                         MX6QDL_PAD_DI0_PIN4__GPIO4_IO20         0x1b088 /* ETH_PHY_RESET */
 300                         MX6QDL_PAD_GPIO_6__ENET_IRQ             0x000b1
 301                 >;
 302         };
 303
 304         pinctrl_flexcan1: flexcan1grp {
 305                 fsl,pins = <
 306                         MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b088
 307                         MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b088
 308                         MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21       0x1b088 /* EN_CAN_1 */
 309                 >;
 310         };
 311
 312         pinctrl_flexcan2: flexcan2grp {
 313                 fsl,pins = <
 314                         MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX        0x1b088
 315                         MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX        0x1b088
 316                         MX6QDL_PAD_EIM_BCLK__GPIO6_IO31         0x1b088 /* EN_CAN_2 */
 317                 >;
 318         };
 319
 320         pinctrl_hog: hoggrp {
 321                 fsl,pins = <
 322                         /* Onboard */
 323                         MX6QDL_PAD_SD4_DAT3__GPIO2_IO11         0x1b088 /* USB_HUB_RESET */
 324                         MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17      0x1b088 /* SEL_DC_USB */
 325                         MX6QDL_PAD_EIM_A16__GPIO2_IO22          0x1b088 /* EN_USB_5V */
 326                         MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08      0x1b088 /* JTAG_FPGA_TMS */
 327                         MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11      0x1b088 /* JTAG_FPGA_TCK */
 328                         MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12      0x1b088 /* JTAG_FPGA_TDO */
 329                         MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16      0x1b088 /* JTAG_FPGA_TDI */
 330                         MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14      0x1b088 /* GYRO_INT */
 331                         MX6QDL_PAD_EIM_OE__GPIO2_IO25           0x1b088 /* MODBUS_FAULT */
 332                         MX6QDL_PAD_EIM_RW__GPIO2_IO26           0x1b088 /* BUS_DIR/JP_SD_BOOT */
 333                         MX6QDL_PAD_EIM_A19__GPIO2_IO19          0x1b088 /* EN_MODBUS_24V */
 334                         MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26       0x1b088 /* EN_MODBUS_3V */
 335                         MX6QDL_PAD_EIM_A17__GPIO2_IO21          0x1b088 /* I210_RESET */
 336                         MX6QDL_PAD_EIM_D23__GPIO3_IO23          0x1b088 /* EN_RTC_PWR */
 337                         MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x1b088 /* REVSTRAP1 */
 338
 339                         /* Offboard */
 340                         MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28       0x1b088 /* LCD_D09 */
 341                         MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30       0x1b088 /* HD1_IRQ */
 342                         MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31      0x1b088 /* LCD_D10 */
 343                         MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05      0x1b088 /* LCD_D11 */
 344                         MX6QDL_PAD_EIM_EB1__GPIO2_IO29          0x1b088 /* BUS_BHE */
 345                         MX6QDL_PAD_EIM_LBA__GPIO2_IO27          0x1b088 /* BUS_ALE */
 346                         MX6QDL_PAD_EIM_CS0__GPIO2_IO23          0x1b088 /* BUS_CS */
 347                         MX6QDL_PAD_EIM_A24__GPIO5_IO04          0x1b088 /* DIO_20 */
 348                         MX6QDL_PAD_EIM_WAIT__GPIO5_IO00         0x1b088 /* BUS_WAIT */
 349                         MX6QDL_PAD_EIM_DA0__GPIO3_IO00          0x1b088 /* MUX_AD_00 */
 350                         MX6QDL_PAD_EIM_DA1__GPIO3_IO01          0x1b088 /* MUX_AD_01 */
 351                         MX6QDL_PAD_EIM_DA2__GPIO3_IO02          0x1b088 /* MUX_AD_02 */
 352                         MX6QDL_PAD_EIM_DA3__GPIO3_IO03          0x1b088 /* MUX_AD_03 */
 353                         MX6QDL_PAD_EIM_DA4__GPIO3_IO04          0x1b088 /* MUX_AD_04 */
 354                         MX6QDL_PAD_EIM_DA5__GPIO3_IO05          0x1b088 /* MUX_AD_05 */
 355                         MX6QDL_PAD_EIM_DA6__GPIO3_IO06          0x1b088 /* MUX_AD_06 */
 356                         MX6QDL_PAD_EIM_DA7__GPIO3_IO07          0x1b088 /* MUX_AD_07 */
 357                         MX6QDL_PAD_EIM_DA8__GPIO3_IO08          0x1b088 /* MUX_AD_08 */
 358                         MX6QDL_PAD_EIM_DA9__GPIO3_IO09          0x1b088 /* MUX_AD_09 */
 359                         MX6QDL_PAD_EIM_DA10__GPIO3_IO10         0x1b088 /* MUX_AD_10 */
 360                         MX6QDL_PAD_EIM_DA11__GPIO3_IO11         0x1b088 /* MUX_AD_11 */
 361                         MX6QDL_PAD_EIM_DA12__GPIO3_IO12         0x1b088 /* MUX_AD_12 */
 362                         MX6QDL_PAD_EIM_DA13__GPIO3_IO13         0x1b088 /* MUX_AD_13 */
 363                         MX6QDL_PAD_EIM_DA14__GPIO3_IO14         0x1b088 /* MUX_AD_14 */
 364                         MX6QDL_PAD_EIM_DA15__GPIO3_IO15         0x1b088 /* MUX_AD_15 */
 365
 366                         /* Strapping only */
 367                         MX6QDL_PAD_EIM_A18__GPIO2_IO20          0x1b088
 368                         MX6QDL_PAD_EIM_A21__GPIO2_IO17          0x1b088
 369                 >;
 370         };
 371
 372         pinctrl_i2c1: i2c1grp {
 373                 fsl,pins = <
 374                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 375                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 376                 >;
 377         };
 378
 379         pinctrl_i2c1_gpio: i2c1gpiogrp {
 380                 fsl,pins = <
 381                         MX6QDL_PAD_EIM_D21__GPIO3_IO21          0x4001b8b1
 382                         MX6QDL_PAD_EIM_D28__GPIO3_IO28          0x4001b8b1
 383                 >;
 384         };
 385
 386         pinctrl_i2c2: i2c2grp {
 387                 fsl,pins = <
 388                         MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 389                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 390                 >;
 391         };
 392
 393         pinctrl_i2c2_gpio: i2c2gpiogrp {
 394                 fsl,pins = <
 395                         MX6QDL_PAD_KEY_COL3__GPIO4_IO12         0x4001b8b1
 396                         MX6QDL_PAD_KEY_ROW3__GPIO4_IO13         0x4001b8b1
 397                 >;
 398         };
 399
 400         pinctrl_leds1: leds1grp {
 401                 fsl,pins = <
 402                         MX6QDL_PAD_EIM_D27__GPIO3_IO27          0x1b088 /* GREEN_LED */
 403                         MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x1b088 /* RED_LED */
 404                         MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x1b088 /* YEL_LED */
 405                         MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25       0x1b088 /* IMX6_BLUE_LED */
 406                 >;
 407         };
 408
 409         pinctrl_sgtl5000: sgtl5000grp {
 410                 fsl,pins = <
 411                         MX6QDL_PAD_CSI0_DAT7__AUD3_RXD          0x130b0
 412                         MX6QDL_PAD_CSI0_DAT4__AUD3_TXC          0x130b0
 413                         MX6QDL_PAD_CSI0_DAT5__AUD3_TXD          0x110b0
 414                         MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS         0x130b0
 415                         MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x130b0 /* Audio CLK */
 416                 >;
 417         };
 418
 419         pinctrl_uart1: uart1grp {
 420                 fsl,pins = <
 421                         MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b088
 422                         MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b088
 423                 >;
 424         };
 425
 426         pinctrl_uart2: uart2grp {
 427                 fsl,pins = <
 428                         MX6QDL_PAD_GPIO_7__UART2_TX_DATA        0x1b088
 429                         MX6QDL_PAD_GPIO_8__UART2_RX_DATA        0x1b088
 430                         MX6QDL_PAD_SD4_DAT6__UART2_CTS_B        0x1b088
 431                         MX6QDL_PAD_SD4_DAT5__UART2_RTS_B        0x1b088
 432                 >;
 433         };
 434
 435         pinctrl_uart3: uart3grp {
 436                 fsl,pins = <
 437                         MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b088
 438                         MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b088
 439                         MX6QDL_PAD_EIM_D30__UART3_RTS_B         0x1b088
 440                         MX6QDL_PAD_EIM_D31__UART3_CTS_B         0x1b088
 441                 >;
 442         };
 443
 444         pinctrl_uart4: uart4grp {
 445                 fsl,pins = <
 446                         MX6QDL_PAD_KEY_COL0__UART4_TX_DATA      0x1b088
 447                         MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA      0x1b088
 448                 >;
 449         };
 450
 451         pinctrl_uart5: uart5grp {
 452                 fsl,pins = <
 453                         MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b088
 454                         MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b088
 455                 >;
 456         };
 457
 458         pinctrl_usbotg: usbotggrp {
 459                 fsl,pins = <
 460                         MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 461                 >;
 462         };
 463
 464         pinctrl_usdhc1: usdhc1grp {
 465                 fsl,pins = <
 466                         MX6QDL_PAD_SD1_CMD__SD1_CMD             0x17059
 467                         MX6QDL_PAD_SD1_CLK__SD1_CLK             0x10059
 468                         MX6QDL_PAD_SD1_DAT0__SD1_DATA0          0x17059
 469                         MX6QDL_PAD_SD1_DAT1__SD1_DATA1          0x17059
 470                         MX6QDL_PAD_SD1_DAT2__SD1_DATA2          0x17059
 471                         MX6QDL_PAD_SD1_DAT3__SD1_DATA3          0x17059
 472                         MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x17059 /* WIFI IRQ */
 473                 >;
 474         };
 475
 476         pinctrl_usdhc2: usdhc2grp {
 477                 fsl,pins = <
 478                         MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 479                         MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 480                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 481                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 482                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 483                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 484                         MX6QDL_PAD_EIM_EB0__GPIO2_IO28          0x1b088 /* EN_SD_POWER */
 485                 >;
 486         };
 487
 488         pinctrl_usdhc3: usdhc3grp {
 489                 fsl,pins = <
 490                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 491                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 492                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 493                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 494                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 495                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 496                 >;
 497         };
 498 };
 499
 500 &pcie {
 501         status = "okay";
 502 };
 503
 504 &snvs_rtc {
 505         status = "disabled";
 506 };
 507
 508 &ssi1 {
 509         fsl,mode = "i2s-slave";
 510         status = "okay";
 511 };
 512
 513 &uart1 {
 514         pinctrl-names = "default";
 515         pinctrl-0 = <&pinctrl_uart1>;
 516         status = "okay";
 517 };
 518
 519 &uart2 {
 520         pinctrl-names = "default";
 521         pinctrl-0 = <&pinctrl_uart2>;
 522         uart-has-rtscts;
 523         status = "okay";
 524 };
 525
 526 &uart3 {
 527         pinctrl-names = "default";
 528         pinctrl-0 = <&pinctrl_uart3>;
 529         status = "okay";
 530 };
 531
 532 &uart4 {
 533         pinctrl-names = "default";
 534         pinctrl-0 = <&pinctrl_uart4>;
 535         status = "okay";
 536 };
 537
 538 &uart5 {
 539         pinctrl-names = "default";
 540         pinctrl-0 = <&pinctrl_uart5>;
 541         status = "okay";
 542 };
 543
 544 &usbh1 {
 545         status = "okay";
 546 };
 547
 548 &usbotg {
 549         vbus-supply = <&reg_usb_otg_vbus>;
 550         pinctrl-names = "default";
 551         pinctrl-0 = <&pinctrl_usbotg>;
 552         disable-over-current;
 553         status = "okay";
 554 };
 555
 556 /* WIFI */
 557 &usdhc1 {
 558         pinctrl-names = "default";
 559         pinctrl-0 = <&pinctrl_usdhc1>;
 560         vmmc-supply = <&reg_wlan_vmmc>;
 561         bus-width = <4>;
 562         non-removable;
 563         #address-cells = <1>;
 564         #size-cells = <0>;
 565         status = "okay";
 566
 567         wlcore: wlcore@2 {
 568                 compatible = "ti,wl1271";
 569                 reg = <2>;
 570                 interrupt-parent = <&gpio1>;
 571                 interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
 572                 ref-clock-frequency = <38400000>;
 573         };
 574 };
 575
 576 /* SD */
 577 &usdhc2 {
 578         pinctrl-names = "default";
 579         pinctrl-0 = <&pinctrl_usdhc2>;
 580         vmmc-supply = <&reg_3p3v>;
 581         bus-width = <4>;
 582         fsl,wp-controller;
 583         status = "okay";
 584 };
 585
 586 /* eMMC */
 587 &usdhc3 {
 588         pinctrl-names = "default";
 589         pinctrl-0 = <&pinctrl_usdhc3>;
 590         vmmc-supply = <&reg_3p3v>;
 591         bus-width = <4>;
 592         non-removable;
 593         status = "okay";
 594 };