arch/arm/boot/dts/imx6qdl-tx6.dtsi

   1 /*
   2  * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License
  11  *     version 2 as published by the Free Software Foundation.
  12  *
  13  *     This file is distributed in the hope that it will be useful,
  14  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  *     GNU General Public License for more details.
  17  *
  18  * Or, alternatively,
  19  *
  20  *  b) Permission is hereby granted, free of charge, to any person
  21  *     obtaining a copy of this software and associated documentation
  22  *     files (the "Software"), to deal in the Software without
  23  *     restriction, including without limitation the rights to use,
  24  *     copy, modify, merge, publish, distribute, sublicense, and/or
  25  *     sell copies of the Software, and to permit persons to whom the
  26  *     Software is furnished to do so, subject to the following
  27  *     conditions:
  28  *
  29  *     The above copyright notice and this permission notice shall be
  30  *     included in all copies or substantial portions of the Software.
  31  *
  32  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  33  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  34  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  35  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  36  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  37  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  38  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  39  *     OTHER DEALINGS IN THE SOFTWARE.
  40  */
  41
  42 #include <dt-bindings/gpio/gpio.h>
  43 #include <dt-bindings/input/input.h>
  44 #include <dt-bindings/interrupt-controller/irq.h>
  45 #include <dt-bindings/pwm/pwm.h>
  46 #include <dt-bindings/sound/fsl-imx-audmux.h>
  47
  48 / {
  49         aliases {
  50                 can0 = &can2;
  51                 can1 = &can1;
  52                 ethernet0 = &fec;
  53                 lcdif-23bit-pins-a = &pinctrl_disp0_1;
  54                 lcdif-24bit-pins-a = &pinctrl_disp0_2;
  55                 pwm0 = &pwm1;
  56                 pwm1 = &pwm2;
  57                 reg-can-xcvr = &reg_can_xcvr;
  58                 stk5led = &user_led;
  59                 usbotg = &usbotg;
  60                 sdhc0 = &usdhc1;
  61                 sdhc1 = &usdhc2;
  62         };
  63
  64         memory@10000000 {
  65                 device_type = "memory";
  66                 reg = <0x10000000 0>; /* will be filled by U-Boot */
  67         };
  68
  69         clocks {
  70                 #address-cells = <1>;
  71                 #size-cells = <0>;
  72
  73                 mclk: clock@0 {
  74                         compatible = "fixed-clock";
  75                         reg = <0>;
  76                         #clock-cells = <0>;
  77                         clock-frequency = <26000000>;
  78                 };
  79         };
  80
  81         gpio-keys {
  82                 compatible = "gpio-keys";
  83
  84                 power {
  85                         label = "Power Button";
  86                         gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
  87                         linux,code = <KEY_POWER>;
  88                         wakeup-source;
  89                 };
  90         };
  91
  92         leds {
  93                 compatible = "gpio-leds";
  94
  95                 user_led: user {
  96                         label = "Heartbeat";
  97                         pinctrl-names = "default";
  98                         pinctrl-0 = <&pinctrl_user_led>;
  99                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 100                         linux,default-trigger = "heartbeat";
 101                 };
 102         };
 103
 104         reg_3v3_etn: regulator-3v3-etn {
 105                 compatible = "regulator-fixed";
 106                 regulator-name = "3V3_ETN";
 107                 regulator-min-microvolt = <3300000>;
 108                 regulator-max-microvolt = <3300000>;
 109                 pinctrl-names = "default";
 110                 pinctrl-0 = <&pinctrl_etnphy_power>;
 111                 gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 112                 enable-active-high;
 113         };
 114
 115         reg_2v5: regulator-2v5 {
 116                 compatible = "regulator-fixed";
 117                 regulator-name = "2V5";
 118                 regulator-min-microvolt = <2500000>;
 119                 regulator-max-microvolt = <2500000>;
 120                 regulator-always-on;
 121         };
 122
 123         reg_3v3: regulator-3v3 {
 124                 compatible = "regulator-fixed";
 125                 regulator-name = "3V3";
 126                 regulator-min-microvolt = <3300000>;
 127                 regulator-max-microvolt = <3300000>;
 128                 regulator-always-on;
 129         };
 130
 131         reg_can_xcvr: regulator-can-xcvr {
 132                 compatible = "regulator-fixed";
 133                 regulator-name = "CAN XCVR";
 134                 regulator-min-microvolt = <3300000>;
 135                 regulator-max-microvolt = <3300000>;
 136                 pinctrl-names = "default";
 137                 pinctrl-0 = <&pinctrl_flexcan_xcvr>;
 138                 gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
 139         };
 140
 141         reg_lcd0_pwr: regulator-lcd0-pwr {
 142                 compatible = "regulator-fixed";
 143                 regulator-name = "LCD0 POWER";
 144                 regulator-min-microvolt = <3300000>;
 145                 regulator-max-microvolt = <3300000>;
 146                 pinctrl-names = "default";
 147                 pinctrl-0 = <&pinctrl_lcd0_pwr>;
 148                 gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
 149                 enable-active-high;
 150                 status = "disabled";
 151         };
 152
 153         reg_lcd1_pwr: regulator-lcd1-pwr {
 154                 compatible = "regulator-fixed";
 155                 regulator-name = "LCD1 POWER";
 156                 regulator-min-microvolt = <3300000>;
 157                 regulator-max-microvolt = <3300000>;
 158                 pinctrl-names = "default";
 159                 pinctrl-0 = <&pinctrl_lcd1_pwr>;
 160                 gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
 161                 enable-active-high;
 162                 status = "disabled";
 163         };
 164
 165         reg_usbh1_vbus: regulator-usbh1-vbus {
 166                 compatible = "regulator-fixed";
 167                 regulator-name = "usbh1_vbus";
 168                 regulator-min-microvolt = <5000000>;
 169                 regulator-max-microvolt = <5000000>;
 170                 pinctrl-names = "default";
 171                 pinctrl-0 = <&pinctrl_usbh1_vbus>;
 172                 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
 173                 enable-active-high;
 174         };
 175
 176         reg_usbotg_vbus: regulator-usbotg-vbus {
 177                 compatible = "regulator-fixed";
 178                 regulator-name = "usbotg_vbus";
 179                 regulator-min-microvolt = <5000000>;
 180                 regulator-max-microvolt = <5000000>;
 181                 pinctrl-names = "default";
 182                 pinctrl-0 = <&pinctrl_usbotg_vbus>;
 183                 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 184                 enable-active-high;
 185         };
 186
 187         sound {
 188                 compatible = "karo,imx6qdl-tx6-sgtl5000",
 189                              "simple-audio-card";
 190                 simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio";
 191                 pinctrl-names = "default";
 192                 pinctrl-0 = <&pinctrl_audmux>;
 193                 simple-audio-card,format = "i2s";
 194                 simple-audio-card,bitclock-master = <&codec_dai>;
 195                 simple-audio-card,frame-master = <&codec_dai>;
 196                 simple-audio-card,widgets =
 197                         "Microphone", "Mic Jack",
 198                         "Line", "Line In",
 199                         "Line", "Line Out",
 200                         "Headphone", "Headphone Jack";
 201                 simple-audio-card,routing =
 202                         "MIC_IN", "Mic Jack",
 203                         "Mic Jack", "Mic Bias",
 204                         "Headphone Jack", "HP_OUT";
 205
 206                 cpu_dai: simple-audio-card,cpu {
 207                         sound-dai = <&ssi1>;
 208                 };
 209
 210                 codec_dai: simple-audio-card,codec {
 211                         sound-dai = <&sgtl5000>;
 212                 };
 213         };
 214 };
 215
 216 &audmux {
 217         status = "okay";
 218
 219         ssi1 {
 220                 fsl,audmux-port = <0>;
 221                 fsl,port-config = <
 222                         (IMX_AUDMUX_V2_PTCR_SYN |
 223                         IMX_AUDMUX_V2_PTCR_TFSEL(4) |
 224                         IMX_AUDMUX_V2_PTCR_TCSEL(4) |
 225                         IMX_AUDMUX_V2_PTCR_TFSDIR |
 226                         IMX_AUDMUX_V2_PTCR_TCLKDIR)
 227                         IMX_AUDMUX_V2_PDCR_RXDSEL(4)
 228                 >;
 229         };
 230
 231         pins5 {
 232                 fsl,audmux-port = <4>;
 233                 fsl,port-config = <
 234                         IMX_AUDMUX_V2_PTCR_SYN
 235                         IMX_AUDMUX_V2_PDCR_RXDSEL(0)
 236                 >;
 237         };
 238 };
 239
 240 &can1 {
 241         pinctrl-names = "default";
 242         pinctrl-0 = <&pinctrl_flexcan1>;
 243         xceiver-supply = <&reg_can_xcvr>;
 244         status = "okay";
 245 };
 246
 247 &can2 {
 248         pinctrl-names = "default";
 249         pinctrl-0 = <&pinctrl_flexcan2>;
 250         xceiver-supply = <&reg_can_xcvr>;
 251         status = "okay";
 252 };
 253
 254 &ecspi1 {
 255         pinctrl-names = "default";
 256         pinctrl-0 = <&pinctrl_ecspi1>;
 257         cs-gpios = <
 258                 &gpio2 30 GPIO_ACTIVE_HIGH
 259                 &gpio3 19 GPIO_ACTIVE_HIGH
 260         >;
 261         status = "disabled";
 262
 263         spidev0: spi@0 {
 264                 compatible = "spidev";
 265                 reg = <0>;
 266                 spi-max-frequency = <54000000>;
 267         };
 268
 269         spidev1: spi@1 {
 270                 compatible = "spidev";
 271                 reg = <1>;
 272                 spi-max-frequency = <54000000>;
 273         };
 274 };
 275
 276 &fec {
 277         pinctrl-names = "default";
 278         pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>;
 279         clocks = <&clks IMX6QDL_CLK_ENET>,
 280                  <&clks IMX6QDL_CLK_ENET>,
 281                  <&clks IMX6QDL_CLK_ENET_REF>,
 282                  <&clks IMX6QDL_CLK_ENET_REF>;
 283         clock-names = "ipg", "ahb", "ptp", "enet_out";
 284         phy-mode = "rmii";
 285         phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 286         phy-reset-post-delay = <10>;
 287         phy-handle = <&etnphy>;
 288         phy-supply = <&reg_3v3_etn>;
 289         status = "okay";
 290
 291         mdio {
 292                 #address-cells = <1>;
 293                 #size-cells = <0>;
 294
 295                 etnphy: ethernet-phy@0 {
 296                         compatible = "ethernet-phy-ieee802.3-c22";
 297                         reg = <0>;
 298                         pinctrl-names = "default";
 299                         pinctrl-0 = <&pinctrl_etnphy_int>;
 300                         interrupt-parent = <&gpio7>;
 301                         interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 302                 };
 303         };
 304 };
 305
 306 &gpmi {
 307         pinctrl-names = "default";
 308         pinctrl-0 = <&pinctrl_gpmi_nand>;
 309         nand-on-flash-bbt;
 310         fsl,no-blockmark-swap;
 311         status = "okay";
 312 };
 313
 314 &i2c1 {
 315         pinctrl-names = "default", "gpio";
 316         pinctrl-0 = <&pinctrl_i2c1>;
 317         pinctrl-1 = <&pinctrl_i2c1_gpio>;
 318         scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 319         sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
 320         clock-frequency = <400000>;
 321         status = "okay";
 322
 323         ds1339: rtc@68 {
 324                 compatible = "dallas,ds1339";
 325                 reg = <0x68>;
 326                 trickle-resistor-ohms = <250>;
 327                 trickle-diode-disable;
 328         };
 329 };
 330
 331 &i2c3 {
 332         pinctrl-names = "default", "gpio";
 333         pinctrl-0 = <&pinctrl_i2c3>;
 334         pinctrl-1 = <&pinctrl_i2c3_gpio>;
 335         scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 336         sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 337         clock-frequency = <400000>;
 338         status = "okay";
 339
 340         sgtl5000: sgtl5000@a {
 341                 compatible = "fsl,sgtl5000";
 342                 #sound-dai-cells = <0>;
 343                 reg = <0x0a>;
 344                 VDDA-supply = <&reg_2v5>;
 345                 VDDIO-supply = <&reg_3v3>;
 346                 clocks = <&mclk>;
 347         };
 348
 349         polytouch: edt-ft5x06@38 {
 350                 compatible = "edt,edt-ft5x06";
 351                 reg = <0x38>;
 352                 pinctrl-names = "default";
 353                 pinctrl-0 = <&pinctrl_edt_ft5x06>;
 354                 interrupt-parent = <&gpio6>;
 355                 interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
 356                 reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
 357                 wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 358                 wakeup-source;
 359         };
 360
 361         touchscreen: tsc2007@48 {
 362                 compatible = "ti,tsc2007";
 363                 reg = <0x48>;
 364                 pinctrl-names = "default";
 365                 pinctrl-0 = <&pinctrl_tsc2007>;
 366                 interrupt-parent = <&gpio3>;
 367                 interrupts = <26 0>;
 368                 gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
 369                 ti,x-plate-ohms = <660>;
 370                 wakeup-source;
 371         };
 372 };
 373
 374 &iomuxc {
 375         pinctrl-names = "default";
 376         pinctrl-0 = <&pinctrl_hog>;
 377
 378         pinctrl_hog: hoggrp {
 379                 fsl,pins = <
 380                         MX6QDL_PAD_EIM_A25__GPIO5_IO02          0x1b0b1 /* PWR BTN */
 381                 >;
 382         };
 383
 384         pinctrl_audmux: audmuxgrp {
 385                 fsl,pins = <
 386                         MX6QDL_PAD_KEY_ROW1__AUD5_RXD           0x130b0 /* SSI1_RXD */
 387                         MX6QDL_PAD_KEY_ROW0__AUD5_TXD           0x110b0 /* SSI1_TXD */
 388                         MX6QDL_PAD_KEY_COL0__AUD5_TXC           0x130b0 /* SSI1_CLK */
 389                         MX6QDL_PAD_KEY_COL1__AUD5_TXFS          0x130b0 /* SSI1_FS */
 390                 >;
 391         };
 392
 393         pinctrl_disp0_1: disp0grp-1 {
 394                 fsl,pins = <
 395                         MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
 396                         MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
 397                         MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
 398                         MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
 399                         /* PAD DISP0_DAT0 is used for the Flexcan transceiver control */
 400                         MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
 401                         MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
 402                         MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
 403                         MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
 404                         MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
 405                         MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
 406                         MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
 407                         MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
 408                         MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
 409                         MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
 410                         MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
 411                         MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
 412                         MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
 413                         MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
 414                         MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
 415                         MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
 416                         MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
 417                         MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
 418                         MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
 419                         MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
 420                         MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
 421                         MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
 422                         MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
 423                 >;
 424         };
 425
 426         pinctrl_disp0_2: disp0grp-2 {
 427                 fsl,pins = <
 428                         MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
 429                         MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
 430                         MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
 431                         MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
 432                         MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
 433                         MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
 434                         MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
 435                         MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
 436                         MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
 437                         MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
 438                         MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
 439                         MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
 440                         MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
 441                         MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
 442                         MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
 443                         MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
 444                         MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
 445                         MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
 446                         MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
 447                         MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
 448                         MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
 449                         MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
 450                         MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
 451                         MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
 452                         MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
 453                         MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
 454                         MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
 455                         MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
 456                 >;
 457         };
 458
 459         pinctrl_ecspi1: ecspi1grp {
 460                 fsl,pins = <
 461                         MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x0b0b0
 462                         MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x0b0b0
 463                         MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x0b0b0
 464                         MX6QDL_PAD_GPIO_19__ECSPI1_RDY          0x0b0b0
 465                         MX6QDL_PAD_EIM_EB2__GPIO2_IO30          0x0b0b0 /* SPI CS0 */
 466                         MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x0b0b0 /* SPI CS1 */
 467                 >;
 468         };
 469
 470         pinctrl_edt_ft5x06: edt-ft5x06grp {
 471                 fsl,pins = <
 472                         MX6QDL_PAD_NANDF_CS2__GPIO6_IO15        0x1b0b0 /* Interrupt */
 473                         MX6QDL_PAD_EIM_A16__GPIO2_IO22          0x1b0b0 /* Reset */
 474                         MX6QDL_PAD_EIM_A17__GPIO2_IO21          0x1b0b0 /* Wake */
 475                 >;
 476         };
 477
 478         pinctrl_enet: enetgrp {
 479                 fsl,pins = <
 480                         MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x1b0b0
 481                         MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x1b0b0
 482                         MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x1b0b0
 483                         MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
 484                         MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x1b0b0
 485                         MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x1b0b0
 486                         MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x1b0b0
 487                 >;
 488         };
 489
 490         pinctrl_enet_mdio: enet-mdiogrp {
 491                 fsl,pins = <
 492                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 493                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 494                 >;
 495         };
 496
 497         pinctrl_etnphy_int: etnphy-intgrp {
 498                 fsl,pins = <
 499                         MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x1b0b1 /* ETN PHY INT */
 500                 >;
 501         };
 502
 503         pinctrl_etnphy_power: etnphy-pwrgrp {
 504                 fsl,pins = <
 505                         MX6QDL_PAD_EIM_D20__GPIO3_IO20          0x1b0b1 /* ETN PHY POWER */
 506                 >;
 507         };
 508
 509         pinctrl_etnphy_rst: etnphy-rstgrp {
 510                 fsl,pins = <
 511                         MX6QDL_PAD_SD3_DAT2__GPIO7_IO06         0x1b0b1 /* ETN PHY RESET */
 512                 >;
 513         };
 514
 515         pinctrl_flexcan1: flexcan1grp {
 516                 fsl,pins = <
 517                         MX6QDL_PAD_GPIO_7__FLEXCAN1_TX          0x1b0b0
 518                         MX6QDL_PAD_GPIO_8__FLEXCAN1_RX          0x1b0b0
 519                 >;
 520         };
 521
 522         pinctrl_flexcan2: flexcan2grp {
 523                 fsl,pins = <
 524                         MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX        0x1b0b0
 525                         MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX        0x1b0b0
 526                 >;
 527         };
 528
 529         pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
 530                 fsl,pins = <
 531                         MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21       0x1b0b0 /* Flexcan XCVR enable */
 532                 >;
 533         };
 534
 535         pinctrl_gpmi_nand: gpminandgrp {
 536                 fsl,pins = <
 537                         MX6QDL_PAD_NANDF_CLE__NAND_CLE          0x0b0b1
 538                         MX6QDL_PAD_NANDF_ALE__NAND_ALE          0x0b0b1
 539                         MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0x0b0b1
 540                         MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0x0b000
 541                         MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0x0b0b1
 542                         MX6QDL_PAD_SD4_CMD__NAND_RE_B           0x0b0b1
 543                         MX6QDL_PAD_SD4_CLK__NAND_WE_B           0x0b0b1
 544                         MX6QDL_PAD_NANDF_D0__NAND_DATA00        0x0b0b1
 545                         MX6QDL_PAD_NANDF_D1__NAND_DATA01        0x0b0b1
 546                         MX6QDL_PAD_NANDF_D2__NAND_DATA02        0x0b0b1
 547                         MX6QDL_PAD_NANDF_D3__NAND_DATA03        0x0b0b1
 548                         MX6QDL_PAD_NANDF_D4__NAND_DATA04        0x0b0b1
 549                         MX6QDL_PAD_NANDF_D5__NAND_DATA05        0x0b0b1
 550                         MX6QDL_PAD_NANDF_D6__NAND_DATA06        0x0b0b1
 551                         MX6QDL_PAD_NANDF_D7__NAND_DATA07        0x0b0b1
 552                 >;
 553         };
 554
 555         pinctrl_i2c1: i2c1grp {
 556                 fsl,pins = <
 557                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 558                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 559                 >;
 560         };
 561
 562         pinctrl_i2c1_gpio: i2c1-gpiogrp {
 563                 fsl,pins = <
 564                         MX6QDL_PAD_EIM_D21__GPIO3_IO21          0x4001b8b1
 565                         MX6QDL_PAD_EIM_D28__GPIO3_IO28          0x4001b8b1
 566                 >;
 567         };
 568
 569         pinctrl_i2c3: i2c3grp {
 570                 fsl,pins = <
 571                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 572                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 573                 >;
 574         };
 575
 576         pinctrl_i2c3_gpio: i2c3-gpiogrp {
 577                 fsl,pins = <
 578                         MX6QDL_PAD_GPIO_3__GPIO1_IO03           0x4001b8b1
 579                         MX6QDL_PAD_GPIO_6__GPIO1_IO06           0x4001b8b1
 580                 >;
 581         };
 582
 583         pinctrl_kpp: kppgrp {
 584                 fsl,pins = <
 585                         MX6QDL_PAD_GPIO_9__KEY_COL6             0x1b0b1
 586                         MX6QDL_PAD_GPIO_4__KEY_COL7             0x1b0b1
 587                         MX6QDL_PAD_KEY_COL2__KEY_COL2           0x1b0b1
 588                         MX6QDL_PAD_KEY_COL3__KEY_COL3           0x1b0b1
 589                         MX6QDL_PAD_GPIO_2__KEY_ROW6             0x1b0b1
 590                         MX6QDL_PAD_GPIO_5__KEY_ROW7             0x1b0b1
 591                         MX6QDL_PAD_KEY_ROW2__KEY_ROW2           0x1b0b1
 592                         MX6QDL_PAD_KEY_ROW3__KEY_ROW3           0x1b0b1
 593                 >;
 594         };
 595
 596         pinctrl_lcd0_pwr: lcd0-pwrgrp {
 597                 fsl,pins = <
 598                         MX6QDL_PAD_EIM_D29__GPIO3_IO29          0x1b0b1 /* LCD Reset */
 599                 >;
 600         };
 601
 602         pinctrl_lcd1_pwr: lcd-pwrgrp {
 603                 fsl,pins = <
 604                         MX6QDL_PAD_EIM_EB3__GPIO2_IO31          0x1b0b1 /* LCD Power Enable */
 605                 >;
 606         };
 607
 608         pinctrl_pwm1: pwm1grp {
 609                 fsl,pins = <
 610                         MX6QDL_PAD_GPIO_9__PWM1_OUT             0x1b0b1
 611                 >;
 612         };
 613
 614         pinctrl_pwm2: pwm2grp {
 615                 fsl,pins = <
 616                         MX6QDL_PAD_GPIO_1__PWM2_OUT             0x1b0b1
 617                 >;
 618         };
 619
 620         pinctrl_tsc2007: tsc2007grp {
 621                 fsl,pins = <
 622                         MX6QDL_PAD_EIM_D26__GPIO3_IO26          0x1b0b0 /* Interrupt */
 623                 >;
 624         };
 625
 626         pinctrl_uart1: uart1grp {
 627                 fsl,pins = <
 628                         MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 629                         MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 630                 >;
 631         };
 632
 633         pinctrl_uart1_rtscts: uart1_rtsctsgrp {
 634                 fsl,pins = <
 635                         MX6QDL_PAD_SD3_DAT1__UART1_RTS_B        0x1b0b1
 636                         MX6QDL_PAD_SD3_DAT0__UART1_CTS_B        0x1b0b1
 637                 >;
 638         };
 639
 640         pinctrl_uart2: uart2grp {
 641                 fsl,pins = <
 642                         MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 643                         MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 644                 >;
 645         };
 646
 647         pinctrl_uart2_rtscts: uart2_rtsctsgrp {
 648                 fsl,pins = <
 649                         MX6QDL_PAD_SD4_DAT5__UART2_RTS_B        0x1b0b1
 650                         MX6QDL_PAD_SD4_DAT6__UART2_CTS_B        0x1b0b1
 651                 >;
 652         };
 653
 654         pinctrl_uart3: uart3grp {
 655                 fsl,pins = <
 656                         MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
 657                         MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
 658                 >;
 659         };
 660
 661         pinctrl_uart3_rtscts: uart3_rtsctsgrp {
 662                 fsl,pins = <
 663                         MX6QDL_PAD_SD3_DAT3__UART3_CTS_B        0x1b0b1
 664                         MX6QDL_PAD_SD3_RST__UART3_RTS_B         0x1b0b1
 665                 >;
 666         };
 667
 668         pinctrl_usbh1_vbus: usbh1-vbusgrp {
 669                 fsl,pins = <
 670                         MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x1b0b0 /* USBH1_VBUSEN */
 671                 >;
 672         };
 673
 674         pinctrl_usbotg: usbotggrp {
 675                 fsl,pins = <
 676                         MX6QDL_PAD_EIM_D23__GPIO3_IO23          0x17059
 677                 >;
 678         };
 679
 680         pinctrl_usbotg_vbus: usbotg-vbusgrp {
 681                 fsl,pins = <
 682                         MX6QDL_PAD_GPIO_7__GPIO1_IO07           0x1b0b0 /* USBOTG_VBUSEN */
 683                 >;
 684         };
 685
 686         pinctrl_usdhc1: usdhc1grp {
 687                 fsl,pins = <
 688                         MX6QDL_PAD_SD1_CMD__SD1_CMD             0x070b1
 689                         MX6QDL_PAD_SD1_CLK__SD1_CLK             0x070b1
 690                         MX6QDL_PAD_SD1_DAT0__SD1_DATA0          0x070b1
 691                         MX6QDL_PAD_SD1_DAT1__SD1_DATA1          0x070b1
 692                         MX6QDL_PAD_SD1_DAT2__SD1_DATA2          0x070b1
 693                         MX6QDL_PAD_SD1_DAT3__SD1_DATA3          0x070b1
 694                         MX6QDL_PAD_SD3_CMD__GPIO7_IO02          0x170b0 /* SD1 CD */
 695                 >;
 696         };
 697
 698         pinctrl_usdhc2: usdhc2grp {
 699                 fsl,pins = <
 700                         MX6QDL_PAD_SD2_CMD__SD2_CMD             0x070b1
 701                         MX6QDL_PAD_SD2_CLK__SD2_CLK             0x070b1
 702                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x070b1
 703                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x070b1
 704                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x070b1
 705                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x070b1
 706                         MX6QDL_PAD_SD3_CLK__GPIO7_IO03          0x170b0 /* SD2 CD */
 707                 >;
 708         };
 709
 710         pinctrl_user_led: user-ledgrp {
 711                 fsl,pins = <
 712                         MX6QDL_PAD_EIM_A18__GPIO2_IO20          0x1b0b1 /* LED */
 713                 >;
 714         };
 715 };
 716
 717 &kpp {
 718         pinctrl-names = "default";
 719         pinctrl-0 = <&pinctrl_kpp>;
 720         /* sample keymap */
 721         /* row/col 0,1 are mapped to KPP row/col 6,7 */
 722         linux,keymap = <
 723                 MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */
 724                 MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */
 725                 MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */
 726                 MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */
 727                 MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */
 728                 MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */
 729                 MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */
 730                 MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */
 731                 MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */
 732                 MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */
 733                 MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */
 734         >;
 735         status = "okay";
 736 };
 737
 738 &pwm1 {
 739         pinctrl-names = "default";
 740         pinctrl-0 = <&pinctrl_pwm1>;
 741         #pwm-cells = <3>;
 742         status = "disabled";
 743 };
 744
 745 &pwm2 {
 746         pinctrl-names = "default";
 747         pinctrl-0 = <&pinctrl_pwm2>;
 748         #pwm-cells = <3>;
 749         status = "okay";
 750 };
 751
 752 &ssi1 {
 753         status = "okay";
 754 };
 755
 756 &uart1 {
 757         pinctrl-names = "default";
 758         pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
 759         uart-has-rtscts;
 760         status = "okay";
 761 };
 762
 763 &uart2 {
 764         pinctrl-names = "default";
 765         pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
 766         uart-has-rtscts;
 767         status = "okay";
 768 };
 769
 770 &uart3 {
 771         pinctrl-names = "default";
 772         pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
 773         uart-has-rtscts;
 774         status = "okay";
 775 };
 776
 777 &usbh1 {
 778         vbus-supply = <&reg_usbh1_vbus>;
 779         dr_mode = "host";
 780         disable-over-current;
 781         status = "okay";
 782 };
 783
 784 &usbotg {
 785         vbus-supply = <&reg_usbotg_vbus>;
 786         pinctrl-names = "default";
 787         pinctrl-0 = <&pinctrl_usbotg>;
 788         dr_mode = "peripheral";
 789         disable-over-current;
 790         status = "okay";
 791 };
 792
 793 &usdhc1 {
 794         pinctrl-names = "default";
 795         pinctrl-0 = <&pinctrl_usdhc1>;
 796         bus-width = <4>;
 797         no-1-8-v;
 798         cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 799         fsl,wp-controller;
 800         status = "okay";
 801 };
 802
 803 &usdhc2 {
 804         pinctrl-names = "default";
 805         pinctrl-0 = <&pinctrl_usdhc2>;
 806         bus-width = <4>;
 807         no-1-8-v;
 808         cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 809         fsl,wp-controller;
 810         status = "okay";
 811 };