arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Digi International's ConnectCore6UL SBC Express board device tree source
   4  *
   5  * Copyright 2018 Digi International, Inc.
   6  *
   7  */
   8
   9 /dts-v1/;
  10 #include <dt-bindings/input/input.h>
  11 #include <dt-bindings/interrupt-controller/irq.h>
  12 #include "imx6ul.dtsi"
  13 #include "imx6ul-ccimx6ulsom.dtsi"
  14
  15 / {
  16         model = "Digi International ConnectCore 6UL SBC Express.";
  17         compatible = "digi,ccimx6ulsbcexpress", "digi,ccimx6ulsom",
  18                      "fsl,imx6ul";
  19 };
  20
  21 &adc1 {
  22         pinctrl-names = "default";
  23         pinctrl-0 = <&pinctrl_adc1>;
  24         status = "okay";
  25 };
  26
  27 &can1 {
  28         pinctrl-names = "default";
  29         pinctrl-0 = <&pinctrl_flexcan1>;
  30         xceiver-supply = <&ext_3v3>;
  31         status = "okay";
  32 };
  33
  34 &ecspi3 {
  35         cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
  36         pinctrl-names = "default";
  37         pinctrl-0 = <&pinctrl_ecspi3_master>;
  38         status = "okay";
  39 };
  40
  41 &fec1 {
  42         pinctrl-names = "default";
  43         pinctrl-0 = <&pinctrl_enet1>;
  44         phy-mode = "rmii";
  45         phy-handle = <&ethphy0>;
  46         status = "okay";
  47
  48         mdio {
  49                 #address-cells = <1>;
  50                 #size-cells = <0>;
  51
  52                 ethphy0: ethernet-phy@0 {
  53                         compatible = "ethernet-phy-ieee802.3-c22";
  54                         smsc,disable-energy-detect;
  55                         reg = <0>;
  56                 };
  57         };
  58 };
  59
  60 &i2c2 {
  61         pinctrl-names = "default";
  62         pinctrl-0 = <&pinctrl_i2c2>;
  63         status = "okay";
  64 };
  65
  66 &pwm1 {
  67         pinctrl-names = "default";
  68         pinctrl-0 = <&pinctrl_pwm1>;
  69         status = "okay";
  70 };
  71
  72 &uart4 {
  73         pinctrl-names = "default";
  74         pinctrl-0 = <&pinctrl_uart4>;
  75         status = "okay";
  76 };
  77
  78 &uart5 {
  79         pinctrl-names = "default";
  80         pinctrl-0 = <&pinctrl_uart5>;
  81         status = "okay";
  82 };
  83
  84 &usbotg1 {
  85         dr_mode = "host";
  86         disable-over-current;
  87         status = "okay";
  88 };
  89
  90 &usbotg2 {
  91         dr_mode = "host";
  92         disable-over-current;
  93         status = "okay";
  94 };
  95
  96 &usdhc2 {
  97         pinctrl-names = "default";
  98         pinctrl-0 = <&pinctrl_usdhc2>;
  99         broken-cd;      /* no carrier detect line (use polling) */
 100         no-1-8-v;
 101         status = "okay";
 102 };
 103
 104 &iomuxc {
 105         pinctrl-names = "default";
 106         pinctrl-0 = <&pinctrl_hog>;
 107
 108         pinctrl_adc1: adc1grp {
 109                 fsl,pins = <
 110                         /* GPIO1_4/ADC1_IN4 (pin 7 of the expansion header) */
 111                         MX6UL_PAD_GPIO1_IO04__GPIO1_IO04        0xb0
 112                 >;
 113         };
 114
 115         pinctrl_ecspi3_master: ecspi3grp1 {
 116                 fsl,pins = <
 117                         MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK    0x10b0
 118                         MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI      0x10b0
 119                         MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO      0x10b0
 120                         MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20     0x10b0 /* Chip Select */
 121                 >;
 122         };
 123
 124         pinctrl_ecspi3_slave: ecspi3grp2 {
 125                 fsl,pins = <
 126                         MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK    0x10b0
 127                         MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI      0x10b0
 128                         MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO      0x10b0
 129                         MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0     0x10b0 /* Chip Select */
 130                 >;
 131         };
 132
 133         pinctrl_enet1: enet1grp {
 134                 fsl,pins = <
 135                         MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
 136                         MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
 137                         MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
 138                         MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
 139                         MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
 140                         MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
 141                         MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
 142                         MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
 143                         MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
 144                         MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x40017051
 145                 >;
 146         };
 147
 148         pinctrl_flexcan1: flexcan1grp{
 149                 fsl,pins = <
 150                         MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX       0x1b020
 151                         MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX       0x1b020
 152                 >;
 153         };
 154
 155         pinctrl_i2c2: i2c2grp {
 156                 fsl,pins = <
 157                         MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
 158                         MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0
 159                 >;
 160         };
 161
 162         pinctrl_pwm1: pwm1grp {
 163                 fsl,pins = <
 164                         MX6UL_PAD_LCD_DATA00__PWM1_OUT          0x10b0
 165                 >;
 166         };
 167
 168         pinctrl_uart4: uart4grp {
 169                 fsl,pins = <
 170                         MX6UL_PAD_LCD_CLK__UART4_DCE_TX         0x1b0b1
 171                         MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX      0x1b0b1
 172                 >;
 173         };
 174
 175         pinctrl_uart5: uart5grp {
 176                 fsl,pins = <
 177                         MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX   0x1b0b1
 178                         MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX   0x1b0b1
 179                 >;
 180         };
 181
 182         pinctrl_usdhc2: usdhc2grp {
 183                 fsl,pins = <
 184                         MX6UL_PAD_CSI_HSYNC__USDHC2_CMD         0x17059
 185                         MX6UL_PAD_CSI_VSYNC__USDHC2_CLK         0x10071
 186                         MX6UL_PAD_CSI_DATA00__USDHC2_DATA0      0x17059
 187                         MX6UL_PAD_CSI_DATA01__USDHC2_DATA1      0x17059
 188                         MX6UL_PAD_CSI_DATA02__USDHC2_DATA2      0x17059
 189                         MX6UL_PAD_CSI_DATA03__USDHC2_DATA3      0x17059
 190                 >;
 191         };
 192
 193         /* General purpose pinctrl */
 194         pinctrl_hog: hoggrp {
 195                 fsl,pins = <
 196                         /* GPIOs BANK 3 */
 197                         MX6UL_PAD_LCD_RESET__GPIO3_IO04         0xf030
 198                 >;
 199         };
 200 };