mtd: nand: omap: Fix comment in platform data using wrong Kconfig symbol
[linux/fpc-iii.git] / arch / arm / boot / dts / omap36xx.dtsi
blob6fb23ada1f64dea9e6ad91701c78a5c2a50725d2
1 /*
2  * Device Tree Source for OMAP3 SoC
3  *
4  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
5  *
6  * This file is licensed under the terms of the GNU General Public License
7  * version 2.  This program is licensed "as is" without any warranty of any
8  * kind, whether express or implied.
9  */
11 #include <dt-bindings/bus/ti-sysc.h>
12 #include <dt-bindings/media/omap3-isp.h>
14 #include "omap3.dtsi"
16 / {
17         aliases {
18                 serial3 = &uart4;
19         };
21         cpus {
22                 /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
23                 cpu: cpu@0 {
24                         operating-points = <
25                                 /* kHz    uV */
26                                 300000  1012500
27                                 600000  1200000
28                                 800000  1325000
29                         >;
30                         clock-latency = <300000>; /* From legacy driver */
31                 };
32         };
34         ocp@68000000 {
35                 uart4: serial@49042000 {
36                         compatible = "ti,omap3-uart";
37                         reg = <0x49042000 0x400>;
38                         interrupts = <80>;
39                         dmas = <&sdma 81 &sdma 82>;
40                         dma-names = "tx", "rx";
41                         ti,hwmods = "uart4";
42                         clock-frequency = <48000000>;
43                 };
45                 abb_mpu_iva: regulator-abb-mpu {
46                         compatible = "ti,abb-v1";
47                         regulator-name = "abb_mpu_iva";
48                         #address-cells = <0>;
49                         #size-cells = <0>;
50                         reg = <0x483072f0 0x8>, <0x48306818 0x4>;
51                         reg-names = "base-address", "int-address";
52                         ti,tranxdone-status-mask = <0x4000000>;
53                         clocks = <&sys_ck>;
54                         ti,settling-time = <30>;
55                         ti,clock-cycles = <8>;
56                         ti,abb_info = <
57                         /*uV            ABB     efuse   rbb_m   fbb_m   vset_m*/
58                         1012500         0       0       0       0       0
59                         1200000         0       0       0       0       0
60                         1325000         0       0       0       0       0
61                         1375000         1       0       0       0       0
62                         >;
63                 };
65                 omap3_pmx_core2: pinmux@480025a0 {
66                         compatible = "ti,omap3-padconf", "pinctrl-single";
67                         reg = <0x480025a0 0x5c>;
68                         #address-cells = <1>;
69                         #size-cells = <0>;
70                         #pinctrl-cells = <1>;
71                         #interrupt-cells = <1>;
72                         interrupt-controller;
73                         pinctrl-single,register-width = <16>;
74                         pinctrl-single,function-mask = <0xff1f>;
75                 };
77                 isp: isp@480bc000 {
78                         compatible = "ti,omap3-isp";
79                         reg = <0x480bc000 0x12fc
80                                0x480bd800 0x0600>;
81                         interrupts = <24>;
82                         iommus = <&mmu_isp>;
83                         syscon = <&scm_conf 0x2f0>;
84                         ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
85                         #clock-cells = <1>;
86                         ports {
87                                 #address-cells = <1>;
88                                 #size-cells = <0>;
89                         };
90                 };
92                 bandgap: bandgap@48002524 {
93                         reg = <0x48002524 0x4>;
94                         compatible = "ti,omap36xx-bandgap";
95                         #thermal-sensor-cells = <0>;
96                 };
98                 target-module@480cb000 {
99                         compatible = "ti,sysc-omap3630-sr", "ti,sysc";
100                         ti,hwmods = "smartreflex_core";
101                         reg = <0x480cb038 0x4>;
102                         reg-names = "sysc";
103                         ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
104                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
105                                         <SYSC_IDLE_NO>,
106                                         <SYSC_IDLE_SMART>;
107                         clocks = <&sr2_fck>;
108                         clock-names = "fck";
109                         #address-cells = <1>;
110                         #size-cells = <1>;
111                         ranges = <0 0x480cb000 0x001000>;
113                         smartreflex_core: smartreflex@0 {
114                                 compatible = "ti,omap3-smartreflex-core";
115                                 reg = <0 0x400>;
116                                 interrupts = <19>;
117                         };
118                 };
120                 target-module@480c9000 {
121                         compatible = "ti,sysc-omap3630-sr", "ti,sysc";
122                         ti,hwmods = "smartreflex_mpu_iva";
123                         reg = <0x480c9038 0x4>;
124                         reg-names = "sysc";
125                         ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
126                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
127                                         <SYSC_IDLE_NO>,
128                                         <SYSC_IDLE_SMART>;
129                         clocks = <&sr1_fck>;
130                         clock-names = "fck";
131                         #address-cells = <1>;
132                         #size-cells = <1>;
133                         ranges = <0 0x480c9000 0x001000>;
136                         smartreflex_mpu_iva: smartreflex@480c9000 {
137                                 compatible = "ti,omap3-smartreflex-mpu-iva";
138                                 reg = <0 0x400>;
139                                 interrupts = <18>;
140                         };
141                 };
142         };
144         thermal_zones: thermal-zones {
145                 #include "omap3-cpu-thermal.dtsi"
146         };
149 /* OMAP3630 needs dss_96m_fck for VENC */
150 &venc {
151         clocks = <&dss_tv_fck>, <&dss_96m_fck>;
152         clock-names = "fck", "tv_dac_clk";
155 &ssi {
156         status = "ok";
158         clocks = <&ssi_ssr_fck>,
159                  <&ssi_sst_fck>,
160                  <&ssi_ick>;
161         clock-names = "ssi_ssr_fck",
162                       "ssi_sst_fck",
163                       "ssi_ick";
166 /include/ "omap34xx-omap36xx-clocks.dtsi"
167 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
168 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
169 /include/ "omap36xx-clocks.dtsi"