arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include "qcom-msm8974.dtsi"
   3 #include "qcom-pm8841.dtsi"
   4 #include "qcom-pm8941.dtsi"
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
   8
   9 / {
  10         model = "LGE MSM 8974 HAMMERHEAD";
  11         compatible = "lge,hammerhead", "qcom,msm8974";
  12
  13         aliases {
  14                 serial0 = &blsp1_uart1;
  15         };
  16
  17         chosen {
  18                 stdout-path = "serial0:115200n8";
  19         };
  20
  21         smd {
  22                 rpm {
  23                         rpm_requests {
  24                                 pm8841-regulators {
  25                                         s1 {
  26                                                 regulator-min-microvolt = <675000>;
  27                                                 regulator-max-microvolt = <1050000>;
  28                                         };
  29
  30                                         s2 {
  31                                                 regulator-min-microvolt = <500000>;
  32                                                 regulator-max-microvolt = <1050000>;
  33                                         };
  34
  35                                         s3 {
  36                                                 regulator-min-microvolt = <1050000>;
  37                                                 regulator-max-microvolt = <1050000>;
  38                                         };
  39
  40                                         s4 {
  41                                                 regulator-min-microvolt = <815000>;
  42                                                 regulator-max-microvolt = <900000>;
  43                                         };
  44                                 };
  45
  46                                 pm8941-regulators {
  47                                         vdd_l1_l3-supply = <&pm8941_s1>;
  48                                         vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
  49                                         vdd_l4_l11-supply = <&pm8941_s1>;
  50                                         vdd_l5_l7-supply = <&pm8941_s2>;
  51                                         vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
  52                                         vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
  53                                         vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
  54                                         vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
  55                                         vdd_l21-supply = <&vreg_boost>;
  56
  57                                         s1 {
  58                                                 regulator-min-microvolt = <1300000>;
  59                                                 regulator-max-microvolt = <1300000>;
  60
  61                                                 regulator-always-on;
  62                                                 regulator-boot-on;
  63                                         };
  64
  65                                         s2 {
  66                                                 regulator-min-microvolt = <2150000>;
  67                                                 regulator-max-microvolt = <2150000>;
  68
  69                                                 regulator-boot-on;
  70                                         };
  71
  72                                         s3 {
  73                                                 regulator-min-microvolt = <1800000>;
  74                                                 regulator-max-microvolt = <1800000>;
  75
  76                                                 regulator-always-on;
  77                                                 regulator-boot-on;
  78                                         };
  79
  80                                         l1 {
  81                                                 regulator-min-microvolt = <1225000>;
  82                                                 regulator-max-microvolt = <1225000>;
  83
  84                                                 regulator-always-on;
  85                                                 regulator-boot-on;
  86                                         };
  87
  88                                         l2 {
  89                                                 regulator-min-microvolt = <1200000>;
  90                                                 regulator-max-microvolt = <1200000>;
  91                                         };
  92
  93                                         l3 {
  94                                                 regulator-min-microvolt = <1225000>;
  95                                                 regulator-max-microvolt = <1225000>;
  96                                         };
  97
  98                                         l4 {
  99                                                 regulator-min-microvolt = <1225000>;
 100                                                 regulator-max-microvolt = <1225000>;
 101                                         };
 102
 103                                         l5 {
 104                                                 regulator-min-microvolt = <1800000>;
 105                                                 regulator-max-microvolt = <1800000>;
 106                                         };
 107
 108                                         l6 {
 109                                                 regulator-min-microvolt = <1800000>;
 110                                                 regulator-max-microvolt = <1800000>;
 111
 112                                                 regulator-boot-on;
 113                                         };
 114
 115                                         l7 {
 116                                                 regulator-min-microvolt = <1800000>;
 117                                                 regulator-max-microvolt = <1800000>;
 118
 119                                                 regulator-boot-on;
 120                                         };
 121
 122                                         l8 {
 123                                                 regulator-min-microvolt = <1800000>;
 124                                                 regulator-max-microvolt = <1800000>;
 125                                         };
 126
 127                                         l9 {
 128                                                 regulator-min-microvolt = <1800000>;
 129                                                 regulator-max-microvolt = <2950000>;
 130                                         };
 131
 132                                         l10 {
 133                                                 regulator-min-microvolt = <1800000>;
 134                                                 regulator-max-microvolt = <2950000>;
 135                                         };
 136
 137                                         l11 {
 138                                                 regulator-min-microvolt = <1300000>;
 139                                                 regulator-max-microvolt = <1300000>;
 140                                         };
 141
 142                                         l12 {
 143                                                 regulator-min-microvolt = <1800000>;
 144                                                 regulator-max-microvolt = <1800000>;
 145
 146                                                 regulator-always-on;
 147                                                 regulator-boot-on;
 148                                         };
 149
 150                                         l13 {
 151                                                 regulator-min-microvolt = <1800000>;
 152                                                 regulator-max-microvolt = <2950000>;
 153
 154                                                 regulator-boot-on;
 155                                         };
 156
 157                                         l14 {
 158                                                 regulator-min-microvolt = <1800000>;
 159                                                 regulator-max-microvolt = <1800000>;
 160                                         };
 161
 162                                         l15 {
 163                                                 regulator-min-microvolt = <2050000>;
 164                                                 regulator-max-microvolt = <2050000>;
 165                                         };
 166
 167                                         l16 {
 168                                                 regulator-min-microvolt = <2700000>;
 169                                                 regulator-max-microvolt = <2700000>;
 170                                         };
 171
 172                                         l17 {
 173                                                 regulator-min-microvolt = <2850000>;
 174                                                 regulator-max-microvolt = <2850000>;
 175                                         };
 176
 177                                         l18 {
 178                                                 regulator-min-microvolt = <2850000>;
 179                                                 regulator-max-microvolt = <2850000>;
 180                                         };
 181
 182                                         l19 {
 183                                                 regulator-min-microvolt = <3000000>;
 184                                                 regulator-max-microvolt = <3300000>;
 185                                         };
 186
 187                                         l20 {
 188                                                 regulator-min-microvolt = <2950000>;
 189                                                 regulator-max-microvolt = <2950000>;
 190
 191                                                 regulator-boot-on;
 192                                                 regulator-system-load = <200000>;
 193                                                 regulator-allow-set-load;
 194                                         };
 195
 196                                         l21 {
 197                                                 regulator-min-microvolt = <2950000>;
 198                                                 regulator-max-microvolt = <2950000>;
 199
 200                                                 regulator-boot-on;
 201                                         };
 202
 203                                         l22 {
 204                                                 regulator-min-microvolt = <3000000>;
 205                                                 regulator-max-microvolt = <3300000>;
 206                                         };
 207
 208                                         l23 {
 209                                                 regulator-min-microvolt = <3000000>;
 210                                                 regulator-max-microvolt = <3000000>;
 211                                         };
 212
 213                                         l24 {
 214                                                 regulator-min-microvolt = <3075000>;
 215                                                 regulator-max-microvolt = <3075000>;
 216
 217                                                 regulator-boot-on;
 218                                         };
 219                                 };
 220                         };
 221                 };
 222         };
 223
 224         vreg_wlan: wlan-regulator {
 225                 compatible = "regulator-fixed";
 226
 227                 regulator-name = "wl-reg";
 228                 regulator-min-microvolt = <3300000>;
 229                 regulator-max-microvolt = <3300000>;
 230
 231                 gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
 232                 enable-active-high;
 233
 234                 pinctrl-names = "default";
 235                 pinctrl-0 = <&wlan_regulator_pin>;
 236         };
 237 };
 238
 239 &soc {
 240         serial@f991d000 {
 241                 status = "ok";
 242         };
 243
 244         pinctrl@fd510000 {
 245                 sdhc1_pin_a: sdhc1-pin-active {
 246                         clk {
 247                                 pins = "sdc1_clk";
 248                                 drive-strength = <16>;
 249                                 bias-disable;
 250                         };
 251
 252                         cmd-data {
 253                                 pins = "sdc1_cmd", "sdc1_data";
 254                                 drive-strength = <10>;
 255                                 bias-pull-up;
 256                         };
 257                 };
 258
 259                 sdhc2_pin_a: sdhc2-pin-active {
 260                         clk {
 261                                 pins = "sdc2_clk";
 262                                 drive-strength = <6>;
 263                                 bias-disable;
 264                         };
 265
 266                         cmd-data {
 267                                 pins = "sdc2_cmd", "sdc2_data";
 268                                 drive-strength = <6>;
 269                                 bias-pull-up;
 270                         };
 271                 };
 272
 273                 i2c1_pins: i2c1 {
 274                         mux {
 275                                 pins = "gpio2", "gpio3";
 276                                 function = "blsp_i2c1";
 277
 278                                 drive-strength = <2>;
 279                                 bias-disable;
 280                         };
 281                 };
 282
 283                 i2c3_pins: i2c3 {
 284                         mux {
 285                                 pins = "gpio10", "gpio11";
 286                                 function = "blsp_i2c3";
 287                                 drive-strength = <2>;
 288                                 bias-disable;
 289                         };
 290                 };
 291
 292                 i2c12_pins: i2c12 {
 293                         mux {
 294                                 pins = "gpio87", "gpio88";
 295                                 function = "blsp_i2c12";
 296                                 drive-strength = <2>;
 297                                 bias-disable;
 298                         };
 299                 };
 300
 301                 mpu6515_pin: mpu6515 {
 302                         irq {
 303                                 pins = "gpio73";
 304                                 function = "gpio";
 305                                 bias-disable;
 306                                 input-enable;
 307                         };
 308                 };
 309         };
 310
 311         sdhci@f9824900 {
 312                 status = "ok";
 313
 314                 vmmc-supply = <&pm8941_l20>;
 315                 vqmmc-supply = <&pm8941_s3>;
 316
 317                 bus-width = <8>;
 318                 non-removable;
 319
 320                 pinctrl-names = "default";
 321                 pinctrl-0 = <&sdhc1_pin_a>;
 322         };
 323
 324         sdhci@f98a4900 {
 325                 status = "ok";
 326
 327                 max-frequency = <100000000>;
 328                 bus-width = <4>;
 329                 non-removable;
 330                 vmmc-supply = <&vreg_wlan>;
 331                 vqmmc-supply = <&pm8941_s3>;
 332
 333                 pinctrl-names = "default";
 334                 pinctrl-0 = <&sdhc2_pin_a>;
 335
 336                 #address-cells = <1>;
 337                 #size-cells = <0>;
 338
 339                 bcrmf@1 {
 340                         compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
 341                         reg = <1>;
 342
 343                         brcm,drive-strength = <10>;
 344
 345                         pinctrl-names = "default";
 346                         pinctrl-0 = <&wlan_sleep_clk_pin>;
 347                 };
 348         };
 349
 350         gpio-keys {
 351                 compatible = "gpio-keys";
 352                 input-name = "gpio-keys";
 353
 354                 pinctrl-names = "default";
 355                 pinctrl-0 = <&gpio_keys_pin_a>;
 356
 357                 volume-up {
 358                         label = "volume_up";
 359                         gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
 360                         linux,input-type = <1>;
 361                         linux,code = <KEY_VOLUMEUP>;
 362                 };
 363
 364                 volume-down {
 365                         label = "volume_down";
 366                         gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
 367                         linux,input-type = <1>;
 368                         linux,code = <KEY_VOLUMEDOWN>;
 369                 };
 370         };
 371
 372         i2c@f9968000 {
 373                 status = "ok";
 374                 pinctrl-names = "default";
 375                 pinctrl-0 = <&i2c12_pins>;
 376                 clock-frequency = <100000>;
 377                 qcom,src-freq = <50000000>;
 378
 379                 mpu6515@68 {
 380                         compatible = "invensense,mpu6515";
 381                         reg = <0x68>;
 382                         interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>;
 383                         vddio-supply = <&pm8941_lvs1>;
 384
 385                         pinctrl-names = "default";
 386                         pinctrl-0 = <&mpu6515_pin>;
 387
 388                         i2c-gate {
 389                                 #address-cells = <1>;
 390                                 #size-cells = <0>;
 391                                 ak8963@f {
 392                                         compatible = "asahi-kasei,ak8963";
 393                                         reg = <0x0f>;
 394                                         gpios = <&msmgpio 67 0>;
 395                                         vid-supply = <&pm8941_lvs1>;
 396                                         vdd-supply = <&pm8941_l17>;
 397                                 };
 398
 399                                 bmp280@76 {
 400                                         compatible = "bosch,bmp280";
 401                                         reg = <0x76>;
 402                                         vdda-supply = <&pm8941_lvs1>;
 403                                         vddd-supply = <&pm8941_l17>;
 404                                 };
 405                         };
 406                 };
 407         };
 408
 409         i2c@f9923000 {
 410                 status = "ok";
 411                 pinctrl-names = "default";
 412                 pinctrl-0 = <&i2c1_pins>;
 413                 clock-frequency = <100000>;
 414                 qcom,src-freq = <50000000>;
 415
 416                 charger: bq24192@6b {
 417                         compatible = "ti,bq24192";
 418                         reg = <0x6b>;
 419                         interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
 420
 421                         omit-battery-class;
 422
 423                         usb_otg_vbus: usb-otg-vbus { };
 424                 };
 425         };
 426
 427         i2c@f9925000 {
 428                 status = "ok";
 429                 pinctrl-names = "default";
 430                 pinctrl-0 = <&i2c3_pins>;
 431                 clock-frequency = <100000>;
 432                 qcom,src-freq = <50000000>;
 433
 434                 avago_apds993@39 {
 435                         compatible = "avago,apds9930";
 436                         reg = <0x39>;
 437                         interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
 438                         vdd-supply = <&pm8941_l17>;
 439                         vddio-supply = <&pm8941_lvs1>;
 440                         led-max-microamp = <100000>;
 441                         amstaos,proximity-diodes = <0>;
 442                 };
 443         };
 444
 445         usb@f9a55000 {
 446                 status = "ok";
 447
 448                 phys = <&usb_hs1_phy>;
 449                 phy-select = <&tcsr 0xb000 0>;
 450
 451                 extcon = <&charger>, <&usb_id>;
 452                 vbus-supply = <&usb_otg_vbus>;
 453
 454                 hnp-disable;
 455                 srp-disable;
 456                 adp-disable;
 457
 458                 ulpi {
 459                         phy@a {
 460                                 status = "ok";
 461
 462                                 v1p8-supply = <&pm8941_l6>;
 463                                 v3p3-supply = <&pm8941_l24>;
 464
 465                                 qcom,init-seq = /bits/ 8 <0x1 0x64>;
 466                         };
 467                 };
 468         };
 469 };
 470
 471 &spmi_bus {
 472         pm8941@0 {
 473                 gpios@c000 {
 474                         gpio_keys_pin_a: gpio-keys-active {
 475                                 pins = "gpio2", "gpio3";
 476                                 function = "normal";
 477
 478                                 bias-pull-up;
 479                                 power-source = <PM8941_GPIO_S3>;
 480                         };
 481
 482                         wlan_sleep_clk_pin: wl-sleep-clk {
 483                                 pins = "gpio16";
 484                                 function = "func2";
 485
 486                                 output-high;
 487                                 power-source = <PM8941_GPIO_S3>;
 488                         };
 489
 490                         wlan_regulator_pin: wl-reg-active {
 491                                 pins = "gpio17";
 492                                 function = "normal";
 493
 494                                 bias-disable;
 495                                 power-source = <PM8941_GPIO_S3>;
 496                         };
 497
 498                         otg {
 499                                 gpio-hog;
 500                                 gpios = <35 GPIO_ACTIVE_HIGH>;
 501                                 output-high;
 502                                 line-name = "otg-gpio";
 503                         };
 504                 };
 505         };
 506 };