mtd: nand: omap: Fix comment in platform data using wrong Kconfig symbol
[linux/fpc-iii.git] / arch / arm / boot / dts / rk3036-kylin.dts
blob0173eb11ec28828b5abe2625f47d280d220d2b70
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include "rk3036.dtsi"
7 / {
8         model = "Rockchip RK3036 KylinBoard";
9         compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
11         memory@60000000 {
12                 device_type = "memory";
13                 reg = <0x60000000 0x20000000>;
14         };
16         leds: gpio-leds {
17                 compatible = "gpio-leds";
19                 work {
20                         gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
21                         label = "kylin:red:led";
22                         pinctrl-names = "default";
23                         pinctrl-0 = <&led_ctl>;
24                 };
25         };
27         sdio_pwrseq: sdio-pwrseq {
28                 compatible = "mmc-pwrseq-simple";
29                 pinctrl-names = "default";
30                 pinctrl-0 = <&bt_wake_h>;
32                 /*
33                  * On the module itself this is one of these (depending
34                  * on the actual card populated):
35                  * - SDIO_RESET_L_WL_REG_ON
36                  * - SDIO_RESET_L_WL_RST
37                  * - SDIO_RESET_L_BT_EN
38                  */
39                 reset-gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
40                               <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>, /* WL_RST */
41                               <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; /* BT_EN */
42         };
44         sound {
45                 compatible = "simple-audio-card";
46                 simple-audio-card,format = "i2s";
47                 simple-audio-card,name = "rockchip,rt5616-codec";
48                 simple-audio-card,mclk-fs = <512>;
49                 simple-audio-card,widgets =
50                         "Microphone", "Microphone Jack",
51                         "Headphone", "Headphone Jack";
52                 simple-audio-card,routing =
53                         "MIC1", "Microphone Jack",
54                         "MIC2", "Microphone Jack",
55                         "Microphone Jack", "micbias1",
56                         "Headphone Jack", "HPOL",
57                         "Headphone Jack", "HPOR";
59                 simple-audio-card,cpu {
60                         sound-dai = <&i2s>;
61                 };
63                 simple-audio-card,codec {
64                         sound-dai = <&rt5616>;
65                 };
66         };
68         vcc_sys: vsys-regulator {
69                 compatible = "regulator-fixed";
70                 regulator-name = "vcc_sys";
71                 regulator-min-microvolt = <5000000>;
72                 regulator-max-microvolt = <5000000>;
73                 regulator-always-on;
74                 regulator-boot-on;
75         };
78 &acodec {
79         status = "okay";
82 &emac {
83         pinctrl-names = "default";
84         pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
85         phy = <&phy0>;
86         phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
87         phy-reset-duration = <10>; /* millisecond */
89         status = "okay";
91         phy0: ethernet-phy@0 {
92                 reg = <0>;
93         };
96 &emmc {
97         status = "okay";
100 &gpu {
101         mali-supply = <&vdd_gpu>;
102         status = "okay";
105 &hdmi {
106         status = "okay";
109 &i2c1 {
110         clock-frequency = <400000>;
112         status = "okay";
114         rk808: pmic@1b {
115                 compatible = "rockchip,rk808";
116                 reg = <0x1b>;
117                 interrupt-parent = <&gpio2>;
118                 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
119                 pinctrl-names = "default";
120                 pinctrl-0 = <&pmic_int &global_pwroff>;
121                 rockchip,system-power-controller;
122                 wakeup-source;
123                 #clock-cells = <1>;
124                 clock-output-names = "xin32k", "rk808-clkout2";
126                 vcc1-supply = <&vcc_sys>;
127                 vcc2-supply = <&vcc_sys>;
128                 vcc3-supply = <&vcc_sys>;
129                 vcc4-supply = <&vcc_sys>;
130                 vcc6-supply = <&vcc_sys>;
131                 vcc7-supply = <&vcc_sys>;
132                 vcc8-supply = <&vcc_18>;
133                 vcc9-supply = <&vcc_io>;
134                 vcc10-supply = <&vcc_io>;
135                 vcc11-supply = <&vcc_sys>;
136                 vcc12-supply = <&vcc_io>;
137                 vddio-supply = <&vccio_pmu>;
139                 regulators {
140                         vdd_cpu: DCDC_REG1 {
141                                 regulator-always-on;
142                                 regulator-boot-on;
143                                 regulator-min-microvolt = <750000>;
144                                 regulator-max-microvolt = <1350000>;
145                                 regulator-name = "vdd_arm";
146                                 regulator-state-mem {
147                                         regulator-off-in-suspend;
148                                 };
149                         };
151                         vdd_gpu: DCDC_REG2 {
152                                 regulator-always-on;
153                                 regulator-boot-on;
154                                 regulator-min-microvolt = <850000>;
155                                 regulator-max-microvolt = <1250000>;
156                                 regulator-name = "vdd_gpu";
157                                 regulator-state-mem {
158                                         regulator-on-in-suspend;
159                                         regulator-suspend-microvolt = <1000000>;
160                                 };
161                         };
163                         vcc_ddr: DCDC_REG3 {
164                                 regulator-always-on;
165                                 regulator-boot-on;
166                                 regulator-name = "vcc_ddr";
167                                 regulator-state-mem {
168                                         regulator-on-in-suspend;
169                                 };
170                         };
172                         vcc_io: DCDC_REG4 {
173                                 regulator-always-on;
174                                 regulator-boot-on;
175                                 regulator-min-microvolt = <3300000>;
176                                 regulator-max-microvolt = <3300000>;
177                                 regulator-name = "vcc_io";
178                                 regulator-state-mem {
179                                         regulator-on-in-suspend;
180                                         regulator-suspend-microvolt = <3300000>;
181                                 };
182                         };
184                         vccio_pmu: LDO_REG1 {
185                                 regulator-always-on;
186                                 regulator-boot-on;
187                                 regulator-min-microvolt = <3300000>;
188                                 regulator-max-microvolt = <3300000>;
189                                 regulator-name = "vccio_pmu";
190                                 regulator-state-mem {
191                                         regulator-on-in-suspend;
192                                         regulator-suspend-microvolt = <3300000>;
193                                 };
194                         };
196                         vcc_tp: LDO_REG2 {
197                                 regulator-always-on;
198                                 regulator-boot-on;
199                                 regulator-min-microvolt = <3300000>;
200                                 regulator-max-microvolt = <3300000>;
201                                 regulator-name = "vcc_tp";
202                                 regulator-state-mem {
203                                         regulator-off-in-suspend;
204                                 };
205                         };
207                         vdd_10: LDO_REG3 {
208                                 regulator-always-on;
209                                 regulator-boot-on;
210                                 regulator-min-microvolt = <1000000>;
211                                 regulator-max-microvolt = <1000000>;
212                                 regulator-name = "vdd_10";
213                                 regulator-state-mem {
214                                         regulator-on-in-suspend;
215                                         regulator-suspend-microvolt = <1000000>;
216                                 };
217                         };
219                         vcc18_lcd: LDO_REG4 {
220                                 regulator-always-on;
221                                 regulator-boot-on;
222                                 regulator-min-microvolt = <1800000>;
223                                 regulator-max-microvolt = <1800000>;
224                                 regulator-name = "vcc18_lcd";
225                                 regulator-state-mem {
226                                         regulator-on-in-suspend;
227                                         regulator-suspend-microvolt = <1800000>;
228                                 };
229                         };
231                         vccio_sd: LDO_REG5 {
232                                 regulator-always-on;
233                                 regulator-boot-on;
234                                 regulator-min-microvolt = <1800000>;
235                                 regulator-max-microvolt = <3300000>;
236                                 regulator-name = "vccio_sd";
237                                 regulator-state-mem {
238                                         regulator-on-in-suspend;
239                                         regulator-suspend-microvolt = <3300000>;
240                                 };
241                         };
243                         vout5: LDO_REG6 {
244                                 regulator-always-on;
245                                 regulator-boot-on;
246                                 regulator-min-microvolt = <1800000>;
247                                 regulator-max-microvolt = <2500000>;
248                                 regulator-name = "vout5";
249                                 regulator-state-mem {
250                                         regulator-on-in-suspend;
251                                         regulator-suspend-microvolt = <1800000>;
252                                 };
253                         };
255                         vcc_18: LDO_REG7 {
256                                 regulator-always-on;
257                                 regulator-boot-on;
258                                 regulator-min-microvolt = <1800000>;
259                                 regulator-max-microvolt = <1800000>;
260                                 regulator-name = "vcc_18";
261                                 regulator-state-mem {
262                                         regulator-on-in-suspend;
263                                         regulator-suspend-microvolt = <1800000>;
264                                 };
265                         };
267                         vcca_codec: LDO_REG8 {
268                                 regulator-always-on;
269                                 regulator-boot-on;
270                                 regulator-min-microvolt = <1800000>;
271                                 regulator-max-microvolt = <1800000>;
272                                 regulator-name = "vcca_codec";
273                                 regulator-state-mem {
274                                         regulator-on-in-suspend;
275                                         regulator-suspend-microvolt = <1800000>;
276                                 };
277                         };
279                         vcc_wl: SWITCH_REG1 {
280                                 regulator-always-on;
281                                 regulator-boot-on;
282                                 regulator-name = "vcc_wl";
283                                 regulator-state-mem {
284                                         regulator-on-in-suspend;
285                                 };
286                         };
288                         vcc_lcd: SWITCH_REG2 {
289                                 regulator-always-on;
290                                 regulator-boot-on;
291                                 regulator-name = "vcc_lcd";
292                                 regulator-state-mem {
293                                         regulator-on-in-suspend;
294                                 };
295                         };
296                 };
297         };
300 &i2c2 {
301         status = "okay";
303         rt5616: rt5616@1b {
304                 compatible = "rt5616";
305                 reg = <0x1b>;
306                 clocks = <&cru SCLK_I2S_OUT>;
307                 clock-names = "mclk";
308                 #sound-dai-cells = <0>;
309         };
312 &i2s {
313         status = "okay";
316 &sdio {
317         status = "okay";
319         bus-width = <4>;
320         cap-sd-highspeed;
321         cap-sdio-irq;
322         default-sample-phase = <90>;
323         keep-power-in-suspend;
324         mmc-pwrseq = <&sdio_pwrseq>;
325         non-removable;
326         pinctrl-names = "default";
327         pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
328         sd-uhs-sdr12;
329         sd-uhs-sdr25;
330         sd-uhs-sdr50;
331         sd-uhs-sdr104;
334 &sdmmc {
335         bus-width = <4>;
336         cap-mmc-highspeed;
337         cap-sd-highspeed;
338         card-detect-delay = <200>;
339         disable-wp;
340         pinctrl-names = "default";
341         pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
344 &uart0 {
345         status = "okay";
348 &uart2 {
349         status = "okay";
352 &usb_host {
353         status = "okay";
356 &usb_otg {
357         status = "okay";
360 &vop {
361         status = "okay";
364 &vop_mmu {
365         status = "okay";
368 &pinctrl {
369         leds {
370                 led_ctl: led-ctl {
371                         rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>;
372                 };
373         };
375         pmic {
376                 pmic_int: pmic-int {
377                         rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
378                 };
379         };
381         sdio {
382                 bt_wake_h: bt-wake-h {
383                         rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>;
384                 };
385         };
387         sdmmc {
388                 sdmmc_pwr: sdmmc-pwr {
389                         rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>;
390                 };
391         };
393         sleep {
394                 global_pwroff: global-pwroff {
395                         rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;
396                 };
397         };