mtd: nand: omap: Fix comment in platform data using wrong Kconfig symbol
[linux/fpc-iii.git] / arch / arm / boot / dts / stm32f7-pinctrl.dtsi
blob9314128df185919a737b7b74eb45322bd97284c1
1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2 /*
3  * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
4  * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
5  */
7 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
8 #include <dt-bindings/mfd/stm32f7-rcc.h>
10 / {
11         soc {
12                 pinctrl: pin-controller {
13                         #address-cells = <1>;
14                         #size-cells = <1>;
15                         ranges = <0 0x40020000 0x3000>;
16                         interrupt-parent = <&exti>;
17                         st,syscfg = <&syscfg 0x8>;
18                         pins-are-numbered;
20                         gpioa: gpio@40020000 {
21                                 gpio-controller;
22                                 #gpio-cells = <2>;
23                                 interrupt-controller;
24                                 #interrupt-cells = <2>;
25                                 reg = <0x0 0x400>;
26                                 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>;
27                                 st,bank-name = "GPIOA";
28                         };
30                         gpiob: gpio@40020400 {
31                                 gpio-controller;
32                                 #gpio-cells = <2>;
33                                 interrupt-controller;
34                                 #interrupt-cells = <2>;
35                                 reg = <0x400 0x400>;
36                                 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>;
37                                 st,bank-name = "GPIOB";
38                         };
40                         gpioc: gpio@40020800 {
41                                 gpio-controller;
42                                 #gpio-cells = <2>;
43                                 interrupt-controller;
44                                 #interrupt-cells = <2>;
45                                 reg = <0x800 0x400>;
46                                 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>;
47                                 st,bank-name = "GPIOC";
48                         };
50                         gpiod: gpio@40020c00 {
51                                 gpio-controller;
52                                 #gpio-cells = <2>;
53                                 interrupt-controller;
54                                 #interrupt-cells = <2>;
55                                 reg = <0xc00 0x400>;
56                                 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>;
57                                 st,bank-name = "GPIOD";
58                         };
60                         gpioe: gpio@40021000 {
61                                 gpio-controller;
62                                 #gpio-cells = <2>;
63                                 interrupt-controller;
64                                 #interrupt-cells = <2>;
65                                 reg = <0x1000 0x400>;
66                                 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>;
67                                 st,bank-name = "GPIOE";
68                         };
70                         gpiof: gpio@40021400 {
71                                 gpio-controller;
72                                 #gpio-cells = <2>;
73                                 interrupt-controller;
74                                 #interrupt-cells = <2>;
75                                 reg = <0x1400 0x400>;
76                                 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>;
77                                 st,bank-name = "GPIOF";
78                         };
80                         gpiog: gpio@40021800 {
81                                 gpio-controller;
82                                 #gpio-cells = <2>;
83                                 interrupt-controller;
84                                 #interrupt-cells = <2>;
85                                 reg = <0x1800 0x400>;
86                                 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>;
87                                 st,bank-name = "GPIOG";
88                         };
90                         gpioh: gpio@40021c00 {
91                                 gpio-controller;
92                                 #gpio-cells = <2>;
93                                 interrupt-controller;
94                                 #interrupt-cells = <2>;
95                                 reg = <0x1c00 0x400>;
96                                 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>;
97                                 st,bank-name = "GPIOH";
98                         };
100                         gpioi: gpio@40022000 {
101                                 gpio-controller;
102                                 #gpio-cells = <2>;
103                                 interrupt-controller;
104                                 #interrupt-cells = <2>;
105                                 reg = <0x2000 0x400>;
106                                 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>;
107                                 st,bank-name = "GPIOI";
108                         };
110                         gpioj: gpio@40022400 {
111                                 gpio-controller;
112                                 #gpio-cells = <2>;
113                                 interrupt-controller;
114                                 #interrupt-cells = <2>;
115                                 reg = <0x2400 0x400>;
116                                 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>;
117                                 st,bank-name = "GPIOJ";
118                         };
120                         gpiok: gpio@40022800 {
121                                 gpio-controller;
122                                 #gpio-cells = <2>;
123                                 interrupt-controller;
124                                 #interrupt-cells = <2>;
125                                 reg = <0x2800 0x400>;
126                                 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>;
127                                 st,bank-name = "GPIOK";
128                         };
130                         cec_pins_a: cec@0 {
131                                 pins {
132                                         pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
133                                         slew-rate = <0>;
134                                         drive-open-drain;
135                                         bias-disable;
136                                 };
137                         };
139                         usart1_pins_a: usart1@0 {
140                                 pins1 {
141                                         pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
142                                         bias-disable;
143                                         drive-push-pull;
144                                         slew-rate = <0>;
145                                 };
146                                 pins2 {
147                                         pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
148                                         bias-disable;
149                                 };
150                         };
152                         usart1_pins_b: usart1@1 {
153                                 pins1 {
154                                         pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
155                                         bias-disable;
156                                         drive-push-pull;
157                                         slew-rate = <0>;
158                                 };
159                                 pins2 {
160                                         pinmux = <STM32_PINMUX('B', 7, AF7)>; /* USART1_RX */
161                                         bias-disable;
162                                 };
163                         };
165                         i2c1_pins_b: i2c1@0 {
166                                 pins {
167                                         pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
168                                                  <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
169                                         bias-disable;
170                                         drive-open-drain;
171                                         slew-rate = <0>;
172                                 };
173                         };
175                         usbotg_hs_pins_a: usbotg-hs@0 {
176                                 pins {
177                                         pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
178                                                  <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
179                                                  <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
180                                                  <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
181                                                  <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
182                                                  <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
183                                                  <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
184                                                  <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
185                                                  <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
186                                                  <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
187                                                  <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
188                                                  <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
189                                         bias-disable;
190                                         drive-push-pull;
191                                         slew-rate = <2>;
192                                 };
193                         };
195                         usbotg_hs_pins_b: usbotg-hs@1 {
196                                 pins {
197                                         pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
198                                                  <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
199                                                  <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
200                                                  <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
201                                                  <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
202                                                  <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
203                                                  <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
204                                                  <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
205                                                  <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
206                                                  <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
207                                                  <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
208                                                  <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
209                                         bias-disable;
210                                         drive-push-pull;
211                                         slew-rate = <2>;
212                                 };
213                         };
215                         usbotg_fs_pins_a: usbotg-fs@0 {
216                                 pins {
217                                         pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
218                                                  <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
219                                                  <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
220                                         bias-disable;
221                                         drive-push-pull;
222                                         slew-rate = <2>;
223                                 };
224                         };
226                         sdio_pins_a: sdio_pins_a@0 {
227                                 pins {
228                                         pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
229                                                  <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
230                                                  <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */
231                                                  <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */
232                                                  <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1 CLK */
233                                                  <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */
234                                         drive-push-pull;
235                                         slew-rate = <2>;
236                                 };
237                         };
239                         sdio_pins_od_a: sdio_pins_od_a@0 {
240                                 pins1 {
241                                         pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
242                                                  <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
243                                                  <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */
244                                                  <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */
245                                                  <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1 CLK */
246                                         drive-push-pull;
247                                         slew-rate = <2>;
248                                 };
250                                 pins2 {
251                                         pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */
252                                         drive-open-drain;
253                                         slew-rate = <2>;
254                                 };
255                         };
257                         sdio_pins_b: sdio_pins_b@0 {
258                                 pins {
259                                         pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
260                                                  <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
261                                                  <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */
262                                                  <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */
263                                                  <STM32_PINMUX('D', 6, AF11)>, /* SDMMC2 CLK */
264                                                  <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */
265                                         drive-push-pull;
266                                         slew-rate = <2>;
267                                 };
268                         };
270                         sdio_pins_od_b: sdio_pins_od_b@0 {
271                                 pins1 {
272                                         pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
273                                                  <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
274                                                  <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */
275                                                  <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */
276                                                  <STM32_PINMUX('D', 6, AF11)>; /* SDMMC2 CLK */
277                                         drive-push-pull;
278                                         slew-rate = <2>;
279                                 };
281                                 pins2 {
282                                         pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */
283                                         drive-open-drain;
284                                         slew-rate = <2>;
285                                 };
286                         };
287                 };
288         };