2 * arch/arm/mach-ep93xx/core.c
3 * Core routines for Cirrus EP93xx chips.
5 * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
6 * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
8 * Thanks go to Michael Burian and Ray Lehtiniemi for their key
9 * role in the ep93xx linux community.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or (at
14 * your option) any later version.
17 #define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
19 #include <linux/kernel.h>
20 #include <linux/init.h>
21 #include <linux/platform_device.h>
22 #include <linux/interrupt.h>
23 #include <linux/dma-mapping.h>
24 #include <linux/sys_soc.h>
25 #include <linux/irq.h>
27 #include <linux/gpio.h>
28 #include <linux/leds.h>
29 #include <linux/termios.h>
30 #include <linux/amba/bus.h>
31 #include <linux/amba/serial.h>
32 #include <linux/mtd/physmap.h>
33 #include <linux/i2c.h>
34 #include <linux/gpio/machine.h>
35 #include <linux/spi/spi.h>
36 #include <linux/export.h>
37 #include <linux/irqchip/arm-vic.h>
38 #include <linux/reboot.h>
39 #include <linux/usb/ohci_pdriver.h>
40 #include <linux/random.h>
42 #include <mach/hardware.h>
43 #include <linux/platform_data/video-ep93xx.h>
44 #include <linux/platform_data/keypad-ep93xx.h>
45 #include <linux/platform_data/spi-ep93xx.h>
46 #include <mach/gpio-ep93xx.h>
48 #include <asm/mach/arch.h>
49 #include <asm/mach/map.h>
53 /*************************************************************************
54 * Static I/O mappings that are needed for all EP93xx platforms
55 *************************************************************************/
56 static struct map_desc ep93xx_io_desc
[] __initdata
= {
58 .virtual = EP93XX_AHB_VIRT_BASE
,
59 .pfn
= __phys_to_pfn(EP93XX_AHB_PHYS_BASE
),
60 .length
= EP93XX_AHB_SIZE
,
63 .virtual = EP93XX_APB_VIRT_BASE
,
64 .pfn
= __phys_to_pfn(EP93XX_APB_PHYS_BASE
),
65 .length
= EP93XX_APB_SIZE
,
70 void __init
ep93xx_map_io(void)
72 iotable_init(ep93xx_io_desc
, ARRAY_SIZE(ep93xx_io_desc
));
75 /*************************************************************************
77 *************************************************************************/
78 void __init
ep93xx_init_irq(void)
80 vic_init(EP93XX_VIC1_BASE
, 0, EP93XX_VIC1_VALID_IRQ_MASK
, 0);
81 vic_init(EP93XX_VIC2_BASE
, 32, EP93XX_VIC2_VALID_IRQ_MASK
, 0);
85 /*************************************************************************
86 * EP93xx System Controller Software Locked register handling
87 *************************************************************************/
90 * syscon_swlock prevents anything else from writing to the syscon
91 * block while a software locked register is being written.
93 static DEFINE_SPINLOCK(syscon_swlock
);
95 void ep93xx_syscon_swlocked_write(unsigned int val
, void __iomem
*reg
)
99 spin_lock_irqsave(&syscon_swlock
, flags
);
101 __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK
);
102 __raw_writel(val
, reg
);
104 spin_unlock_irqrestore(&syscon_swlock
, flags
);
107 void ep93xx_devcfg_set_clear(unsigned int set_bits
, unsigned int clear_bits
)
112 spin_lock_irqsave(&syscon_swlock
, flags
);
114 val
= __raw_readl(EP93XX_SYSCON_DEVCFG
);
117 __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK
);
118 __raw_writel(val
, EP93XX_SYSCON_DEVCFG
);
120 spin_unlock_irqrestore(&syscon_swlock
, flags
);
124 * ep93xx_chip_revision() - returns the EP93xx chip revision
126 * See <mach/platform.h> for more information.
128 unsigned int ep93xx_chip_revision(void)
132 v
= __raw_readl(EP93XX_SYSCON_SYSCFG
);
133 v
&= EP93XX_SYSCON_SYSCFG_REV_MASK
;
134 v
>>= EP93XX_SYSCON_SYSCFG_REV_SHIFT
;
137 EXPORT_SYMBOL_GPL(ep93xx_chip_revision
);
139 /*************************************************************************
141 *************************************************************************/
142 static struct resource ep93xx_gpio_resource
[] = {
143 DEFINE_RES_MEM(EP93XX_GPIO_PHYS_BASE
, 0xcc),
144 DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB
),
145 DEFINE_RES_IRQ(IRQ_EP93XX_GPIO0MUX
),
146 DEFINE_RES_IRQ(IRQ_EP93XX_GPIO1MUX
),
147 DEFINE_RES_IRQ(IRQ_EP93XX_GPIO2MUX
),
148 DEFINE_RES_IRQ(IRQ_EP93XX_GPIO3MUX
),
149 DEFINE_RES_IRQ(IRQ_EP93XX_GPIO4MUX
),
150 DEFINE_RES_IRQ(IRQ_EP93XX_GPIO5MUX
),
151 DEFINE_RES_IRQ(IRQ_EP93XX_GPIO6MUX
),
152 DEFINE_RES_IRQ(IRQ_EP93XX_GPIO7MUX
),
155 static struct platform_device ep93xx_gpio_device
= {
156 .name
= "gpio-ep93xx",
158 .num_resources
= ARRAY_SIZE(ep93xx_gpio_resource
),
159 .resource
= ep93xx_gpio_resource
,
162 /*************************************************************************
163 * EP93xx peripheral handling
164 *************************************************************************/
165 #define EP93XX_UART_MCR_OFFSET (0x0100)
167 static void ep93xx_uart_set_mctrl(struct amba_device
*dev
,
168 void __iomem
*base
, unsigned int mctrl
)
173 if (mctrl
& TIOCM_RTS
)
175 if (mctrl
& TIOCM_DTR
)
178 __raw_writel(mcr
, base
+ EP93XX_UART_MCR_OFFSET
);
181 static struct amba_pl010_data ep93xx_uart_data
= {
182 .set_mctrl
= ep93xx_uart_set_mctrl
,
185 static AMBA_APB_DEVICE(uart1
, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE
,
186 { IRQ_EP93XX_UART1
}, &ep93xx_uart_data
);
188 static AMBA_APB_DEVICE(uart2
, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE
,
189 { IRQ_EP93XX_UART2
}, NULL
);
191 static AMBA_APB_DEVICE(uart3
, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE
,
192 { IRQ_EP93XX_UART3
}, &ep93xx_uart_data
);
194 static struct resource ep93xx_rtc_resource
[] = {
195 DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE
, 0x10c),
198 static struct platform_device ep93xx_rtc_device
= {
199 .name
= "ep93xx-rtc",
201 .num_resources
= ARRAY_SIZE(ep93xx_rtc_resource
),
202 .resource
= ep93xx_rtc_resource
,
205 /*************************************************************************
206 * EP93xx OHCI USB Host
207 *************************************************************************/
209 static struct clk
*ep93xx_ohci_host_clock
;
211 static int ep93xx_ohci_power_on(struct platform_device
*pdev
)
213 if (!ep93xx_ohci_host_clock
) {
214 ep93xx_ohci_host_clock
= devm_clk_get(&pdev
->dev
, NULL
);
215 if (IS_ERR(ep93xx_ohci_host_clock
))
216 return PTR_ERR(ep93xx_ohci_host_clock
);
219 return clk_enable(ep93xx_ohci_host_clock
);
222 static void ep93xx_ohci_power_off(struct platform_device
*pdev
)
224 clk_disable(ep93xx_ohci_host_clock
);
227 static struct usb_ohci_pdata ep93xx_ohci_pdata
= {
228 .power_on
= ep93xx_ohci_power_on
,
229 .power_off
= ep93xx_ohci_power_off
,
230 .power_suspend
= ep93xx_ohci_power_off
,
233 static struct resource ep93xx_ohci_resources
[] = {
234 DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE
, 0x1000),
235 DEFINE_RES_IRQ(IRQ_EP93XX_USB
),
238 static u64 ep93xx_ohci_dma_mask
= DMA_BIT_MASK(32);
240 static struct platform_device ep93xx_ohci_device
= {
241 .name
= "ohci-platform",
243 .num_resources
= ARRAY_SIZE(ep93xx_ohci_resources
),
244 .resource
= ep93xx_ohci_resources
,
246 .dma_mask
= &ep93xx_ohci_dma_mask
,
247 .coherent_dma_mask
= DMA_BIT_MASK(32),
248 .platform_data
= &ep93xx_ohci_pdata
,
252 /*************************************************************************
253 * EP93xx physmap'ed flash
254 *************************************************************************/
255 static struct physmap_flash_data ep93xx_flash_data
;
257 static struct resource ep93xx_flash_resource
= {
258 .flags
= IORESOURCE_MEM
,
261 static struct platform_device ep93xx_flash
= {
262 .name
= "physmap-flash",
265 .platform_data
= &ep93xx_flash_data
,
268 .resource
= &ep93xx_flash_resource
,
272 * ep93xx_register_flash() - Register the external flash device.
273 * @width: bank width in octets
274 * @start: resource start address
275 * @size: resource size
277 void __init
ep93xx_register_flash(unsigned int width
,
278 resource_size_t start
, resource_size_t size
)
280 ep93xx_flash_data
.width
= width
;
282 ep93xx_flash_resource
.start
= start
;
283 ep93xx_flash_resource
.end
= start
+ size
- 1;
285 platform_device_register(&ep93xx_flash
);
289 /*************************************************************************
290 * EP93xx ethernet peripheral handling
291 *************************************************************************/
292 static struct ep93xx_eth_data ep93xx_eth_data
;
294 static struct resource ep93xx_eth_resource
[] = {
295 DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE
, 0x10000),
296 DEFINE_RES_IRQ(IRQ_EP93XX_ETHERNET
),
299 static u64 ep93xx_eth_dma_mask
= DMA_BIT_MASK(32);
301 static struct platform_device ep93xx_eth_device
= {
302 .name
= "ep93xx-eth",
305 .platform_data
= &ep93xx_eth_data
,
306 .coherent_dma_mask
= DMA_BIT_MASK(32),
307 .dma_mask
= &ep93xx_eth_dma_mask
,
309 .num_resources
= ARRAY_SIZE(ep93xx_eth_resource
),
310 .resource
= ep93xx_eth_resource
,
314 * ep93xx_register_eth - Register the built-in ethernet platform device.
315 * @data: platform specific ethernet configuration (__initdata)
316 * @copy_addr: flag indicating that the MAC address should be copied
317 * from the IndAd registers (as programmed by the bootloader)
319 void __init
ep93xx_register_eth(struct ep93xx_eth_data
*data
, int copy_addr
)
322 memcpy_fromio(data
->dev_addr
, EP93XX_ETHERNET_BASE
+ 0x50, 6);
324 ep93xx_eth_data
= *data
;
325 platform_device_register(&ep93xx_eth_device
);
329 /*************************************************************************
330 * EP93xx i2c peripheral handling
331 *************************************************************************/
333 /* All EP93xx devices use the same two GPIO pins for I2C bit-banging */
334 static struct gpiod_lookup_table ep93xx_i2c_gpiod_table
= {
335 .dev_id
= "i2c-gpio.0",
337 /* Use local offsets on gpiochip/port "G" */
338 GPIO_LOOKUP_IDX("G", 1, NULL
, 0,
339 GPIO_ACTIVE_HIGH
| GPIO_OPEN_DRAIN
),
340 GPIO_LOOKUP_IDX("G", 0, NULL
, 1,
341 GPIO_ACTIVE_HIGH
| GPIO_OPEN_DRAIN
),
345 static struct platform_device ep93xx_i2c_device
= {
349 .platform_data
= NULL
,
354 * ep93xx_register_i2c - Register the i2c platform device.
355 * @devices: platform specific i2c bus device information (__initdata)
356 * @num: the number of devices on the i2c bus
358 void __init
ep93xx_register_i2c(struct i2c_board_info
*devices
, int num
)
361 * FIXME: this just sets the two pins as non-opendrain, as no
362 * platforms tries to do that anyway. Flag the applicable lines
363 * as open drain in the GPIO_LOOKUP above and the driver or
364 * gpiolib will handle open drain/open drain emulation as need
365 * be. Right now i2c-gpio emulates open drain which is not
368 __raw_writel((0 << 1) | (0 << 0),
369 EP93XX_GPIO_EEDRIVE
);
371 i2c_register_board_info(0, devices
, num
);
372 gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table
);
373 platform_device_register(&ep93xx_i2c_device
);
376 /*************************************************************************
377 * EP93xx SPI peripheral handling
378 *************************************************************************/
379 static struct ep93xx_spi_info ep93xx_spi_master_data
;
381 static struct resource ep93xx_spi_resources
[] = {
382 DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE
, 0x18),
383 DEFINE_RES_IRQ(IRQ_EP93XX_SSP
),
386 static u64 ep93xx_spi_dma_mask
= DMA_BIT_MASK(32);
388 static struct platform_device ep93xx_spi_device
= {
389 .name
= "ep93xx-spi",
392 .platform_data
= &ep93xx_spi_master_data
,
393 .coherent_dma_mask
= DMA_BIT_MASK(32),
394 .dma_mask
= &ep93xx_spi_dma_mask
,
396 .num_resources
= ARRAY_SIZE(ep93xx_spi_resources
),
397 .resource
= ep93xx_spi_resources
,
401 * ep93xx_register_spi() - registers spi platform device
402 * @info: ep93xx board specific spi master info (__initdata)
403 * @devices: SPI devices to register (__initdata)
404 * @num: number of SPI devices to register
406 * This function registers platform device for the EP93xx SPI controller and
407 * also makes sure that SPI pins are muxed so that I2S is not using those pins.
409 void __init
ep93xx_register_spi(struct ep93xx_spi_info
*info
,
410 struct spi_board_info
*devices
, int num
)
413 * When SPI is used, we need to make sure that I2S is muxed off from
416 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP
);
418 ep93xx_spi_master_data
= *info
;
419 spi_register_board_info(devices
, num
);
420 platform_device_register(&ep93xx_spi_device
);
423 /*************************************************************************
425 *************************************************************************/
426 static const struct gpio_led ep93xx_led_pins
[] __initconst
= {
428 .name
= "platform:grled",
429 .gpio
= EP93XX_GPIO_LINE_GRLED
,
431 .name
= "platform:rdled",
432 .gpio
= EP93XX_GPIO_LINE_RDLED
,
436 static const struct gpio_led_platform_data ep93xx_led_data __initconst
= {
437 .num_leds
= ARRAY_SIZE(ep93xx_led_pins
),
438 .leds
= ep93xx_led_pins
,
441 /*************************************************************************
442 * EP93xx pwm peripheral handling
443 *************************************************************************/
444 static struct resource ep93xx_pwm0_resource
[] = {
445 DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE
, 0x10),
448 static struct platform_device ep93xx_pwm0_device
= {
449 .name
= "ep93xx-pwm",
451 .num_resources
= ARRAY_SIZE(ep93xx_pwm0_resource
),
452 .resource
= ep93xx_pwm0_resource
,
455 static struct resource ep93xx_pwm1_resource
[] = {
456 DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE
+ 0x20, 0x10),
459 static struct platform_device ep93xx_pwm1_device
= {
460 .name
= "ep93xx-pwm",
462 .num_resources
= ARRAY_SIZE(ep93xx_pwm1_resource
),
463 .resource
= ep93xx_pwm1_resource
,
466 void __init
ep93xx_register_pwm(int pwm0
, int pwm1
)
469 platform_device_register(&ep93xx_pwm0_device
);
471 /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
473 platform_device_register(&ep93xx_pwm1_device
);
476 int ep93xx_pwm_acquire_gpio(struct platform_device
*pdev
)
482 } else if (pdev
->id
== 1) {
483 err
= gpio_request(EP93XX_GPIO_LINE_EGPIO14
,
484 dev_name(&pdev
->dev
));
487 err
= gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14
, 0);
491 /* PWM 1 output on EGPIO[14] */
492 ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG
);
500 gpio_free(EP93XX_GPIO_LINE_EGPIO14
);
503 EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio
);
505 void ep93xx_pwm_release_gpio(struct platform_device
*pdev
)
508 gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14
);
509 gpio_free(EP93XX_GPIO_LINE_EGPIO14
);
511 /* EGPIO[14] used for GPIO */
512 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG
);
515 EXPORT_SYMBOL(ep93xx_pwm_release_gpio
);
518 /*************************************************************************
519 * EP93xx video peripheral handling
520 *************************************************************************/
521 static struct ep93xxfb_mach_info ep93xxfb_data
;
523 static struct resource ep93xx_fb_resource
[] = {
524 DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE
, 0x800),
527 static struct platform_device ep93xx_fb_device
= {
531 .platform_data
= &ep93xxfb_data
,
532 .coherent_dma_mask
= DMA_BIT_MASK(32),
533 .dma_mask
= &ep93xx_fb_device
.dev
.coherent_dma_mask
,
535 .num_resources
= ARRAY_SIZE(ep93xx_fb_resource
),
536 .resource
= ep93xx_fb_resource
,
539 /* The backlight use a single register in the framebuffer's register space */
540 #define EP93XX_RASTER_REG_BRIGHTNESS 0x20
542 static struct resource ep93xx_bl_resources
[] = {
543 DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE
+
544 EP93XX_RASTER_REG_BRIGHTNESS
, 0x04),
547 static struct platform_device ep93xx_bl_device
= {
550 .num_resources
= ARRAY_SIZE(ep93xx_bl_resources
),
551 .resource
= ep93xx_bl_resources
,
555 * ep93xx_register_fb - Register the framebuffer platform device.
556 * @data: platform specific framebuffer configuration (__initdata)
558 void __init
ep93xx_register_fb(struct ep93xxfb_mach_info
*data
)
560 ep93xxfb_data
= *data
;
561 platform_device_register(&ep93xx_fb_device
);
562 platform_device_register(&ep93xx_bl_device
);
566 /*************************************************************************
567 * EP93xx matrix keypad peripheral handling
568 *************************************************************************/
569 static struct ep93xx_keypad_platform_data ep93xx_keypad_data
;
571 static struct resource ep93xx_keypad_resource
[] = {
572 DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE
, 0x0c),
573 DEFINE_RES_IRQ(IRQ_EP93XX_KEY
),
576 static struct platform_device ep93xx_keypad_device
= {
577 .name
= "ep93xx-keypad",
580 .platform_data
= &ep93xx_keypad_data
,
582 .num_resources
= ARRAY_SIZE(ep93xx_keypad_resource
),
583 .resource
= ep93xx_keypad_resource
,
587 * ep93xx_register_keypad - Register the keypad platform device.
588 * @data: platform specific keypad configuration (__initdata)
590 void __init
ep93xx_register_keypad(struct ep93xx_keypad_platform_data
*data
)
592 ep93xx_keypad_data
= *data
;
593 platform_device_register(&ep93xx_keypad_device
);
596 int ep93xx_keypad_acquire_gpio(struct platform_device
*pdev
)
601 for (i
= 0; i
< 8; i
++) {
602 err
= gpio_request(EP93XX_GPIO_LINE_C(i
), dev_name(&pdev
->dev
));
605 err
= gpio_request(EP93XX_GPIO_LINE_D(i
), dev_name(&pdev
->dev
));
610 /* Enable the keypad controller; GPIO ports C and D used for keypad */
611 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS
|
612 EP93XX_SYSCON_DEVCFG_GONK
);
617 gpio_free(EP93XX_GPIO_LINE_C(i
));
619 for (--i
; i
>= 0; --i
) {
620 gpio_free(EP93XX_GPIO_LINE_C(i
));
621 gpio_free(EP93XX_GPIO_LINE_D(i
));
625 EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio
);
627 void ep93xx_keypad_release_gpio(struct platform_device
*pdev
)
631 for (i
= 0; i
< 8; i
++) {
632 gpio_free(EP93XX_GPIO_LINE_C(i
));
633 gpio_free(EP93XX_GPIO_LINE_D(i
));
636 /* Disable the keypad controller; GPIO ports C and D used for GPIO */
637 ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS
|
638 EP93XX_SYSCON_DEVCFG_GONK
);
640 EXPORT_SYMBOL(ep93xx_keypad_release_gpio
);
642 /*************************************************************************
643 * EP93xx I2S audio peripheral handling
644 *************************************************************************/
645 static struct resource ep93xx_i2s_resource
[] = {
646 DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE
, 0x100),
647 DEFINE_RES_IRQ(IRQ_EP93XX_SAI
),
650 static struct platform_device ep93xx_i2s_device
= {
651 .name
= "ep93xx-i2s",
653 .num_resources
= ARRAY_SIZE(ep93xx_i2s_resource
),
654 .resource
= ep93xx_i2s_resource
,
657 static struct platform_device ep93xx_pcm_device
= {
658 .name
= "ep93xx-pcm-audio",
662 void __init
ep93xx_register_i2s(void)
664 platform_device_register(&ep93xx_i2s_device
);
665 platform_device_register(&ep93xx_pcm_device
);
668 #define EP93XX_SYSCON_DEVCFG_I2S_MASK (EP93XX_SYSCON_DEVCFG_I2SONSSP | \
669 EP93XX_SYSCON_DEVCFG_I2SONAC97)
671 #define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
672 EP93XX_SYSCON_I2SCLKDIV_SPOL)
674 int ep93xx_i2s_acquire(void)
678 ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97
,
679 EP93XX_SYSCON_DEVCFG_I2S_MASK
);
682 * This is potentially racy with the clock api for i2s_mclk, sclk and
683 * lrclk. Since the i2s driver is the only user of those clocks we
684 * rely on it to prevent parallel use of this function and the
685 * clock api for the i2s clocks.
687 val
= __raw_readl(EP93XX_SYSCON_I2SCLKDIV
);
688 val
&= ~EP93XX_I2SCLKDIV_MASK
;
689 val
|= EP93XX_SYSCON_I2SCLKDIV_ORIDE
| EP93XX_SYSCON_I2SCLKDIV_SPOL
;
690 ep93xx_syscon_swlocked_write(val
, EP93XX_SYSCON_I2SCLKDIV
);
694 EXPORT_SYMBOL(ep93xx_i2s_acquire
);
696 void ep93xx_i2s_release(void)
698 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK
);
700 EXPORT_SYMBOL(ep93xx_i2s_release
);
702 /*************************************************************************
703 * EP93xx AC97 audio peripheral handling
704 *************************************************************************/
705 static struct resource ep93xx_ac97_resources
[] = {
706 DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE
, 0xac),
707 DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR
),
710 static struct platform_device ep93xx_ac97_device
= {
711 .name
= "ep93xx-ac97",
713 .num_resources
= ARRAY_SIZE(ep93xx_ac97_resources
),
714 .resource
= ep93xx_ac97_resources
,
717 void __init
ep93xx_register_ac97(void)
720 * Make sure that the AC97 pins are not used by I2S.
722 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97
);
724 platform_device_register(&ep93xx_ac97_device
);
725 platform_device_register(&ep93xx_pcm_device
);
728 /*************************************************************************
730 *************************************************************************/
731 static struct resource ep93xx_wdt_resources
[] = {
732 DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE
, 0x08),
735 static struct platform_device ep93xx_wdt_device
= {
736 .name
= "ep93xx-wdt",
738 .num_resources
= ARRAY_SIZE(ep93xx_wdt_resources
),
739 .resource
= ep93xx_wdt_resources
,
742 /*************************************************************************
744 *************************************************************************/
745 static struct resource ep93xx_ide_resources
[] = {
746 DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE
, 0x38),
747 DEFINE_RES_IRQ(IRQ_EP93XX_EXT3
),
750 static struct platform_device ep93xx_ide_device
= {
751 .name
= "ep93xx-ide",
754 .dma_mask
= &ep93xx_ide_device
.dev
.coherent_dma_mask
,
755 .coherent_dma_mask
= DMA_BIT_MASK(32),
757 .num_resources
= ARRAY_SIZE(ep93xx_ide_resources
),
758 .resource
= ep93xx_ide_resources
,
761 void __init
ep93xx_register_ide(void)
763 platform_device_register(&ep93xx_ide_device
);
766 int ep93xx_ide_acquire_gpio(struct platform_device
*pdev
)
771 err
= gpio_request(EP93XX_GPIO_LINE_EGPIO2
, dev_name(&pdev
->dev
));
774 err
= gpio_request(EP93XX_GPIO_LINE_EGPIO15
, dev_name(&pdev
->dev
));
777 for (i
= 2; i
< 8; i
++) {
778 err
= gpio_request(EP93XX_GPIO_LINE_E(i
), dev_name(&pdev
->dev
));
782 for (i
= 4; i
< 8; i
++) {
783 err
= gpio_request(EP93XX_GPIO_LINE_G(i
), dev_name(&pdev
->dev
));
787 for (i
= 0; i
< 8; i
++) {
788 err
= gpio_request(EP93XX_GPIO_LINE_H(i
), dev_name(&pdev
->dev
));
793 /* GPIO ports E[7:2], G[7:4] and H used by IDE */
794 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE
|
795 EP93XX_SYSCON_DEVCFG_GONIDE
|
796 EP93XX_SYSCON_DEVCFG_HONIDE
);
800 for (--i
; i
>= 0; --i
)
801 gpio_free(EP93XX_GPIO_LINE_H(i
));
804 for (--i
; i
>= 4; --i
)
805 gpio_free(EP93XX_GPIO_LINE_G(i
));
808 for (--i
; i
>= 2; --i
)
809 gpio_free(EP93XX_GPIO_LINE_E(i
));
810 gpio_free(EP93XX_GPIO_LINE_EGPIO15
);
812 gpio_free(EP93XX_GPIO_LINE_EGPIO2
);
815 EXPORT_SYMBOL(ep93xx_ide_acquire_gpio
);
817 void ep93xx_ide_release_gpio(struct platform_device
*pdev
)
821 for (i
= 2; i
< 8; i
++)
822 gpio_free(EP93XX_GPIO_LINE_E(i
));
823 for (i
= 4; i
< 8; i
++)
824 gpio_free(EP93XX_GPIO_LINE_G(i
));
825 for (i
= 0; i
< 8; i
++)
826 gpio_free(EP93XX_GPIO_LINE_H(i
));
827 gpio_free(EP93XX_GPIO_LINE_EGPIO15
);
828 gpio_free(EP93XX_GPIO_LINE_EGPIO2
);
831 /* GPIO ports E[7:2], G[7:4] and H used by GPIO */
832 ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE
|
833 EP93XX_SYSCON_DEVCFG_GONIDE
|
834 EP93XX_SYSCON_DEVCFG_HONIDE
);
836 EXPORT_SYMBOL(ep93xx_ide_release_gpio
);
838 /*************************************************************************
840 *************************************************************************/
841 static struct resource ep93xx_adc_resources
[] = {
842 DEFINE_RES_MEM(EP93XX_ADC_PHYS_BASE
, 0x28),
843 DEFINE_RES_IRQ(IRQ_EP93XX_TOUCH
),
846 static struct platform_device ep93xx_adc_device
= {
847 .name
= "ep93xx-adc",
849 .num_resources
= ARRAY_SIZE(ep93xx_adc_resources
),
850 .resource
= ep93xx_adc_resources
,
853 void __init
ep93xx_register_adc(void)
855 /* Power up ADC, deactivate Touch Screen Controller */
856 ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_TIN
,
857 EP93XX_SYSCON_DEVCFG_ADCPD
);
859 platform_device_register(&ep93xx_adc_device
);
862 /*************************************************************************
863 * EP93xx Security peripheral
864 *************************************************************************/
867 * The Maverick Key is 256 bits of micro fuses blown at the factory during
868 * manufacturing to uniquely identify a part.
870 * See: http://arm.cirrus.com/forum/viewtopic.php?t=486&highlight=maverick+key
872 #define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x))
873 #define EP93XX_SECURITY_SECFLG EP93XX_SECURITY_REG(0x2400)
874 #define EP93XX_SECURITY_FUSEFLG EP93XX_SECURITY_REG(0x2410)
875 #define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440)
876 #define EP93XX_SECURITY_UNIQCHK EP93XX_SECURITY_REG(0x2450)
877 #define EP93XX_SECURITY_UNIQVAL EP93XX_SECURITY_REG(0x2460)
878 #define EP93XX_SECURITY_SECID1 EP93XX_SECURITY_REG(0x2500)
879 #define EP93XX_SECURITY_SECID2 EP93XX_SECURITY_REG(0x2504)
880 #define EP93XX_SECURITY_SECCHK1 EP93XX_SECURITY_REG(0x2520)
881 #define EP93XX_SECURITY_SECCHK2 EP93XX_SECURITY_REG(0x2524)
882 #define EP93XX_SECURITY_UNIQID2 EP93XX_SECURITY_REG(0x2700)
883 #define EP93XX_SECURITY_UNIQID3 EP93XX_SECURITY_REG(0x2704)
884 #define EP93XX_SECURITY_UNIQID4 EP93XX_SECURITY_REG(0x2708)
885 #define EP93XX_SECURITY_UNIQID5 EP93XX_SECURITY_REG(0x270c)
887 static char ep93xx_soc_id
[33];
889 static const char __init
*ep93xx_get_soc_id(void)
891 unsigned int id
, id2
, id3
, id4
, id5
;
893 if (__raw_readl(EP93XX_SECURITY_UNIQVAL
) != 1)
894 return "bad Hamming code";
896 id
= __raw_readl(EP93XX_SECURITY_UNIQID
);
897 id2
= __raw_readl(EP93XX_SECURITY_UNIQID2
);
898 id3
= __raw_readl(EP93XX_SECURITY_UNIQID3
);
899 id4
= __raw_readl(EP93XX_SECURITY_UNIQID4
);
900 id5
= __raw_readl(EP93XX_SECURITY_UNIQID5
);
905 /* Toss the unique ID into the entropy pool */
906 add_device_randomness(&id2
, 4);
907 add_device_randomness(&id3
, 4);
908 add_device_randomness(&id4
, 4);
909 add_device_randomness(&id5
, 4);
911 snprintf(ep93xx_soc_id
, sizeof(ep93xx_soc_id
),
912 "%08x%08x%08x%08x", id2
, id3
, id4
, id5
);
914 return ep93xx_soc_id
;
917 static const char __init
*ep93xx_get_soc_rev(void)
919 int rev
= ep93xx_chip_revision();
922 case EP93XX_CHIP_REV_D0
:
924 case EP93XX_CHIP_REV_D1
:
926 case EP93XX_CHIP_REV_E0
:
928 case EP93XX_CHIP_REV_E1
:
930 case EP93XX_CHIP_REV_E2
:
937 static const char __init
*ep93xx_get_machine_name(void)
939 return kasprintf(GFP_KERNEL
,"%s", machine_desc
->name
);
942 static struct device __init
*ep93xx_init_soc(void)
944 struct soc_device_attribute
*soc_dev_attr
;
945 struct soc_device
*soc_dev
;
947 soc_dev_attr
= kzalloc(sizeof(*soc_dev_attr
), GFP_KERNEL
);
951 soc_dev_attr
->machine
= ep93xx_get_machine_name();
952 soc_dev_attr
->family
= "Cirrus Logic EP93xx";
953 soc_dev_attr
->revision
= ep93xx_get_soc_rev();
954 soc_dev_attr
->soc_id
= ep93xx_get_soc_id();
956 soc_dev
= soc_device_register(soc_dev_attr
);
957 if (IS_ERR(soc_dev
)) {
958 kfree(soc_dev_attr
->machine
);
963 return soc_device_to_device(soc_dev
);
966 struct device __init
*ep93xx_init_devices(void)
968 struct device
*parent
;
970 /* Disallow access to MaverickCrunch initially */
971 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA
);
973 /* Default all ports to GPIO */
974 ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS
|
975 EP93XX_SYSCON_DEVCFG_GONK
|
976 EP93XX_SYSCON_DEVCFG_EONIDE
|
977 EP93XX_SYSCON_DEVCFG_GONIDE
|
978 EP93XX_SYSCON_DEVCFG_HONIDE
);
980 parent
= ep93xx_init_soc();
982 /* Get the GPIO working early, other devices need it */
983 platform_device_register(&ep93xx_gpio_device
);
985 amba_device_register(&uart1_device
, &iomem_resource
);
986 amba_device_register(&uart2_device
, &iomem_resource
);
987 amba_device_register(&uart3_device
, &iomem_resource
);
989 platform_device_register(&ep93xx_rtc_device
);
990 platform_device_register(&ep93xx_ohci_device
);
991 platform_device_register(&ep93xx_wdt_device
);
993 gpio_led_register_device(-1, &ep93xx_led_data
);
998 void ep93xx_restart(enum reboot_mode mode
, const char *cmd
)
1001 * Set then clear the SWRST bit to initiate a software reset
1003 ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST
);
1004 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST
);
1010 void __init
ep93xx_init_late(void)