mm: page_alloc: do not treat a zone that cannot be used for dirty pages as "full"
[linux/fpc-iii.git] / arch / x86 / xen / enlighten.c
blob201d09a7c46bbae56a21d15e56e222d67163f5ff
1 /*
2 * Core of Xen paravirt_ops implementation.
4 * This file contains the xen_paravirt_ops structure itself, and the
5 * implementations for:
6 * - privileged instructions
7 * - interrupt flags
8 * - segment operations
9 * - booting and setup
11 * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
14 #include <linux/cpu.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/smp.h>
18 #include <linux/preempt.h>
19 #include <linux/hardirq.h>
20 #include <linux/percpu.h>
21 #include <linux/delay.h>
22 #include <linux/start_kernel.h>
23 #include <linux/sched.h>
24 #include <linux/kprobes.h>
25 #include <linux/bootmem.h>
26 #include <linux/module.h>
27 #include <linux/mm.h>
28 #include <linux/page-flags.h>
29 #include <linux/highmem.h>
30 #include <linux/console.h>
31 #include <linux/pci.h>
32 #include <linux/gfp.h>
33 #include <linux/memblock.h>
34 #include <linux/edd.h>
36 #include <xen/xen.h>
37 #include <xen/events.h>
38 #include <xen/interface/xen.h>
39 #include <xen/interface/version.h>
40 #include <xen/interface/physdev.h>
41 #include <xen/interface/vcpu.h>
42 #include <xen/interface/memory.h>
43 #include <xen/interface/xen-mca.h>
44 #include <xen/features.h>
45 #include <xen/page.h>
46 #include <xen/hvm.h>
47 #include <xen/hvc-console.h>
48 #include <xen/acpi.h>
50 #include <asm/paravirt.h>
51 #include <asm/apic.h>
52 #include <asm/page.h>
53 #include <asm/xen/pci.h>
54 #include <asm/xen/hypercall.h>
55 #include <asm/xen/hypervisor.h>
56 #include <asm/fixmap.h>
57 #include <asm/processor.h>
58 #include <asm/proto.h>
59 #include <asm/msr-index.h>
60 #include <asm/traps.h>
61 #include <asm/setup.h>
62 #include <asm/desc.h>
63 #include <asm/pgalloc.h>
64 #include <asm/pgtable.h>
65 #include <asm/tlbflush.h>
66 #include <asm/reboot.h>
67 #include <asm/stackprotector.h>
68 #include <asm/hypervisor.h>
69 #include <asm/mwait.h>
70 #include <asm/pci_x86.h>
71 #include <asm/pat.h>
73 #ifdef CONFIG_ACPI
74 #include <linux/acpi.h>
75 #include <asm/acpi.h>
76 #include <acpi/pdc_intel.h>
77 #include <acpi/processor.h>
78 #include <xen/interface/platform.h>
79 #endif
81 #include "xen-ops.h"
82 #include "mmu.h"
83 #include "smp.h"
84 #include "multicalls.h"
86 EXPORT_SYMBOL_GPL(hypercall_page);
89 * Pointer to the xen_vcpu_info structure or
90 * &HYPERVISOR_shared_info->vcpu_info[cpu]. See xen_hvm_init_shared_info
91 * and xen_vcpu_setup for details. By default it points to share_info->vcpu_info
92 * but if the hypervisor supports VCPUOP_register_vcpu_info then it can point
93 * to xen_vcpu_info. The pointer is used in __xen_evtchn_do_upcall to
94 * acknowledge pending events.
95 * Also more subtly it is used by the patched version of irq enable/disable
96 * e.g. xen_irq_enable_direct and xen_iret in PV mode.
98 * The desire to be able to do those mask/unmask operations as a single
99 * instruction by using the per-cpu offset held in %gs is the real reason
100 * vcpu info is in a per-cpu pointer and the original reason for this
101 * hypercall.
104 DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
107 * Per CPU pages used if hypervisor supports VCPUOP_register_vcpu_info
108 * hypercall. This can be used both in PV and PVHVM mode. The structure
109 * overrides the default per_cpu(xen_vcpu, cpu) value.
111 DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info);
113 enum xen_domain_type xen_domain_type = XEN_NATIVE;
114 EXPORT_SYMBOL_GPL(xen_domain_type);
116 unsigned long *machine_to_phys_mapping = (void *)MACH2PHYS_VIRT_START;
117 EXPORT_SYMBOL(machine_to_phys_mapping);
118 unsigned long machine_to_phys_nr;
119 EXPORT_SYMBOL(machine_to_phys_nr);
121 struct start_info *xen_start_info;
122 EXPORT_SYMBOL_GPL(xen_start_info);
124 struct shared_info xen_dummy_shared_info;
126 void *xen_initial_gdt;
128 RESERVE_BRK(shared_info_page_brk, PAGE_SIZE);
129 __read_mostly int xen_have_vector_callback;
130 EXPORT_SYMBOL_GPL(xen_have_vector_callback);
133 * Point at some empty memory to start with. We map the real shared_info
134 * page as soon as fixmap is up and running.
136 struct shared_info *HYPERVISOR_shared_info = &xen_dummy_shared_info;
139 * Flag to determine whether vcpu info placement is available on all
140 * VCPUs. We assume it is to start with, and then set it to zero on
141 * the first failure. This is because it can succeed on some VCPUs
142 * and not others, since it can involve hypervisor memory allocation,
143 * or because the guest failed to guarantee all the appropriate
144 * constraints on all VCPUs (ie buffer can't cross a page boundary).
146 * Note that any particular CPU may be using a placed vcpu structure,
147 * but we can only optimise if the all are.
149 * 0: not available, 1: available
151 static int have_vcpu_info_placement = 1;
153 struct tls_descs {
154 struct desc_struct desc[3];
158 * Updating the 3 TLS descriptors in the GDT on every task switch is
159 * surprisingly expensive so we avoid updating them if they haven't
160 * changed. Since Xen writes different descriptors than the one
161 * passed in the update_descriptor hypercall we keep shadow copies to
162 * compare against.
164 static DEFINE_PER_CPU(struct tls_descs, shadow_tls_desc);
166 static void clamp_max_cpus(void)
168 #ifdef CONFIG_SMP
169 if (setup_max_cpus > MAX_VIRT_CPUS)
170 setup_max_cpus = MAX_VIRT_CPUS;
171 #endif
174 static void xen_vcpu_setup(int cpu)
176 struct vcpu_register_vcpu_info info;
177 int err;
178 struct vcpu_info *vcpup;
180 BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info);
183 * This path is called twice on PVHVM - first during bootup via
184 * smp_init -> xen_hvm_cpu_notify, and then if the VCPU is being
185 * hotplugged: cpu_up -> xen_hvm_cpu_notify.
186 * As we can only do the VCPUOP_register_vcpu_info once lets
187 * not over-write its result.
189 * For PV it is called during restore (xen_vcpu_restore) and bootup
190 * (xen_setup_vcpu_info_placement). The hotplug mechanism does not
191 * use this function.
193 if (xen_hvm_domain()) {
194 if (per_cpu(xen_vcpu, cpu) == &per_cpu(xen_vcpu_info, cpu))
195 return;
197 if (cpu < MAX_VIRT_CPUS)
198 per_cpu(xen_vcpu,cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
200 if (!have_vcpu_info_placement) {
201 if (cpu >= MAX_VIRT_CPUS)
202 clamp_max_cpus();
203 return;
206 vcpup = &per_cpu(xen_vcpu_info, cpu);
207 info.mfn = arbitrary_virt_to_mfn(vcpup);
208 info.offset = offset_in_page(vcpup);
210 /* Check to see if the hypervisor will put the vcpu_info
211 structure where we want it, which allows direct access via
212 a percpu-variable.
213 N.B. This hypercall can _only_ be called once per CPU. Subsequent
214 calls will error out with -EINVAL. This is due to the fact that
215 hypervisor has no unregister variant and this hypercall does not
216 allow to over-write info.mfn and info.offset.
218 err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info);
220 if (err) {
221 printk(KERN_DEBUG "register_vcpu_info failed: err=%d\n", err);
222 have_vcpu_info_placement = 0;
223 clamp_max_cpus();
224 } else {
225 /* This cpu is using the registered vcpu info, even if
226 later ones fail to. */
227 per_cpu(xen_vcpu, cpu) = vcpup;
232 * On restore, set the vcpu placement up again.
233 * If it fails, then we're in a bad state, since
234 * we can't back out from using it...
236 void xen_vcpu_restore(void)
238 int cpu;
240 for_each_possible_cpu(cpu) {
241 bool other_cpu = (cpu != smp_processor_id());
242 bool is_up = HYPERVISOR_vcpu_op(VCPUOP_is_up, cpu, NULL);
244 if (other_cpu && is_up &&
245 HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL))
246 BUG();
248 xen_setup_runstate_info(cpu);
250 if (have_vcpu_info_placement)
251 xen_vcpu_setup(cpu);
253 if (other_cpu && is_up &&
254 HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL))
255 BUG();
259 static void __init xen_banner(void)
261 unsigned version = HYPERVISOR_xen_version(XENVER_version, NULL);
262 struct xen_extraversion extra;
263 HYPERVISOR_xen_version(XENVER_extraversion, &extra);
265 pr_info("Booting paravirtualized kernel %son %s\n",
266 xen_feature(XENFEAT_auto_translated_physmap) ?
267 "with PVH extensions " : "", pv_info.name);
268 printk(KERN_INFO "Xen version: %d.%d%s%s\n",
269 version >> 16, version & 0xffff, extra.extraversion,
270 xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
272 /* Check if running on Xen version (major, minor) or later */
273 bool
274 xen_running_on_version_or_later(unsigned int major, unsigned int minor)
276 unsigned int version;
278 if (!xen_domain())
279 return false;
281 version = HYPERVISOR_xen_version(XENVER_version, NULL);
282 if ((((version >> 16) == major) && ((version & 0xffff) >= minor)) ||
283 ((version >> 16) > major))
284 return true;
285 return false;
288 #define CPUID_THERM_POWER_LEAF 6
289 #define APERFMPERF_PRESENT 0
291 static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
292 static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
294 static __read_mostly unsigned int cpuid_leaf1_ecx_set_mask;
295 static __read_mostly unsigned int cpuid_leaf5_ecx_val;
296 static __read_mostly unsigned int cpuid_leaf5_edx_val;
298 static void xen_cpuid(unsigned int *ax, unsigned int *bx,
299 unsigned int *cx, unsigned int *dx)
301 unsigned maskebx = ~0;
302 unsigned maskecx = ~0;
303 unsigned maskedx = ~0;
304 unsigned setecx = 0;
306 * Mask out inconvenient features, to try and disable as many
307 * unsupported kernel subsystems as possible.
309 switch (*ax) {
310 case 1:
311 maskecx = cpuid_leaf1_ecx_mask;
312 setecx = cpuid_leaf1_ecx_set_mask;
313 maskedx = cpuid_leaf1_edx_mask;
314 break;
316 case CPUID_MWAIT_LEAF:
317 /* Synthesize the values.. */
318 *ax = 0;
319 *bx = 0;
320 *cx = cpuid_leaf5_ecx_val;
321 *dx = cpuid_leaf5_edx_val;
322 return;
324 case CPUID_THERM_POWER_LEAF:
325 /* Disabling APERFMPERF for kernel usage */
326 maskecx = ~(1 << APERFMPERF_PRESENT);
327 break;
329 case 0xb:
330 /* Suppress extended topology stuff */
331 maskebx = 0;
332 break;
335 asm(XEN_EMULATE_PREFIX "cpuid"
336 : "=a" (*ax),
337 "=b" (*bx),
338 "=c" (*cx),
339 "=d" (*dx)
340 : "0" (*ax), "2" (*cx));
342 *bx &= maskebx;
343 *cx &= maskecx;
344 *cx |= setecx;
345 *dx &= maskedx;
349 static bool __init xen_check_mwait(void)
351 #ifdef CONFIG_ACPI
352 struct xen_platform_op op = {
353 .cmd = XENPF_set_processor_pminfo,
354 .u.set_pminfo.id = -1,
355 .u.set_pminfo.type = XEN_PM_PDC,
357 uint32_t buf[3];
358 unsigned int ax, bx, cx, dx;
359 unsigned int mwait_mask;
361 /* We need to determine whether it is OK to expose the MWAIT
362 * capability to the kernel to harvest deeper than C3 states from ACPI
363 * _CST using the processor_harvest_xen.c module. For this to work, we
364 * need to gather the MWAIT_LEAF values (which the cstate.c code
365 * checks against). The hypervisor won't expose the MWAIT flag because
366 * it would break backwards compatibility; so we will find out directly
367 * from the hardware and hypercall.
369 if (!xen_initial_domain())
370 return false;
373 * When running under platform earlier than Xen4.2, do not expose
374 * mwait, to avoid the risk of loading native acpi pad driver
376 if (!xen_running_on_version_or_later(4, 2))
377 return false;
379 ax = 1;
380 cx = 0;
382 native_cpuid(&ax, &bx, &cx, &dx);
384 mwait_mask = (1 << (X86_FEATURE_EST % 32)) |
385 (1 << (X86_FEATURE_MWAIT % 32));
387 if ((cx & mwait_mask) != mwait_mask)
388 return false;
390 /* We need to emulate the MWAIT_LEAF and for that we need both
391 * ecx and edx. The hypercall provides only partial information.
394 ax = CPUID_MWAIT_LEAF;
395 bx = 0;
396 cx = 0;
397 dx = 0;
399 native_cpuid(&ax, &bx, &cx, &dx);
401 /* Ask the Hypervisor whether to clear ACPI_PDC_C_C2C3_FFH. If so,
402 * don't expose MWAIT_LEAF and let ACPI pick the IOPORT version of C3.
404 buf[0] = ACPI_PDC_REVISION_ID;
405 buf[1] = 1;
406 buf[2] = (ACPI_PDC_C_CAPABILITY_SMP | ACPI_PDC_EST_CAPABILITY_SWSMP);
408 set_xen_guest_handle(op.u.set_pminfo.pdc, buf);
410 if ((HYPERVISOR_dom0_op(&op) == 0) &&
411 (buf[2] & (ACPI_PDC_C_C1_FFH | ACPI_PDC_C_C2C3_FFH))) {
412 cpuid_leaf5_ecx_val = cx;
413 cpuid_leaf5_edx_val = dx;
415 return true;
416 #else
417 return false;
418 #endif
420 static void __init xen_init_cpuid_mask(void)
422 unsigned int ax, bx, cx, dx;
423 unsigned int xsave_mask;
425 cpuid_leaf1_edx_mask =
426 ~((1 << X86_FEATURE_MTRR) | /* disable MTRR */
427 (1 << X86_FEATURE_ACC)); /* thermal monitoring */
429 if (!xen_initial_domain())
430 cpuid_leaf1_edx_mask &=
431 ~((1 << X86_FEATURE_ACPI)); /* disable ACPI */
433 cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_X2APIC % 32));
435 ax = 1;
436 cx = 0;
437 cpuid(1, &ax, &bx, &cx, &dx);
439 xsave_mask =
440 (1 << (X86_FEATURE_XSAVE % 32)) |
441 (1 << (X86_FEATURE_OSXSAVE % 32));
443 /* Xen will set CR4.OSXSAVE if supported and not disabled by force */
444 if ((cx & xsave_mask) != xsave_mask)
445 cpuid_leaf1_ecx_mask &= ~xsave_mask; /* disable XSAVE & OSXSAVE */
446 if (xen_check_mwait())
447 cpuid_leaf1_ecx_set_mask = (1 << (X86_FEATURE_MWAIT % 32));
450 static void xen_set_debugreg(int reg, unsigned long val)
452 HYPERVISOR_set_debugreg(reg, val);
455 static unsigned long xen_get_debugreg(int reg)
457 return HYPERVISOR_get_debugreg(reg);
460 static void xen_end_context_switch(struct task_struct *next)
462 xen_mc_flush();
463 paravirt_end_context_switch(next);
466 static unsigned long xen_store_tr(void)
468 return 0;
472 * Set the page permissions for a particular virtual address. If the
473 * address is a vmalloc mapping (or other non-linear mapping), then
474 * find the linear mapping of the page and also set its protections to
475 * match.
477 static void set_aliased_prot(void *v, pgprot_t prot)
479 int level;
480 pte_t *ptep;
481 pte_t pte;
482 unsigned long pfn;
483 struct page *page;
485 ptep = lookup_address((unsigned long)v, &level);
486 BUG_ON(ptep == NULL);
488 pfn = pte_pfn(*ptep);
489 page = pfn_to_page(pfn);
491 pte = pfn_pte(pfn, prot);
493 if (HYPERVISOR_update_va_mapping((unsigned long)v, pte, 0))
494 BUG();
496 if (!PageHighMem(page)) {
497 void *av = __va(PFN_PHYS(pfn));
499 if (av != v)
500 if (HYPERVISOR_update_va_mapping((unsigned long)av, pte, 0))
501 BUG();
502 } else
503 kmap_flush_unused();
506 static void xen_alloc_ldt(struct desc_struct *ldt, unsigned entries)
508 const unsigned entries_per_page = PAGE_SIZE / LDT_ENTRY_SIZE;
509 int i;
511 for(i = 0; i < entries; i += entries_per_page)
512 set_aliased_prot(ldt + i, PAGE_KERNEL_RO);
515 static void xen_free_ldt(struct desc_struct *ldt, unsigned entries)
517 const unsigned entries_per_page = PAGE_SIZE / LDT_ENTRY_SIZE;
518 int i;
520 for(i = 0; i < entries; i += entries_per_page)
521 set_aliased_prot(ldt + i, PAGE_KERNEL);
524 static void xen_set_ldt(const void *addr, unsigned entries)
526 struct mmuext_op *op;
527 struct multicall_space mcs = xen_mc_entry(sizeof(*op));
529 trace_xen_cpu_set_ldt(addr, entries);
531 op = mcs.args;
532 op->cmd = MMUEXT_SET_LDT;
533 op->arg1.linear_addr = (unsigned long)addr;
534 op->arg2.nr_ents = entries;
536 MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
538 xen_mc_issue(PARAVIRT_LAZY_CPU);
541 static void xen_load_gdt(const struct desc_ptr *dtr)
543 unsigned long va = dtr->address;
544 unsigned int size = dtr->size + 1;
545 unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
546 unsigned long frames[pages];
547 int f;
550 * A GDT can be up to 64k in size, which corresponds to 8192
551 * 8-byte entries, or 16 4k pages..
554 BUG_ON(size > 65536);
555 BUG_ON(va & ~PAGE_MASK);
557 for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
558 int level;
559 pte_t *ptep;
560 unsigned long pfn, mfn;
561 void *virt;
564 * The GDT is per-cpu and is in the percpu data area.
565 * That can be virtually mapped, so we need to do a
566 * page-walk to get the underlying MFN for the
567 * hypercall. The page can also be in the kernel's
568 * linear range, so we need to RO that mapping too.
570 ptep = lookup_address(va, &level);
571 BUG_ON(ptep == NULL);
573 pfn = pte_pfn(*ptep);
574 mfn = pfn_to_mfn(pfn);
575 virt = __va(PFN_PHYS(pfn));
577 frames[f] = mfn;
579 make_lowmem_page_readonly((void *)va);
580 make_lowmem_page_readonly(virt);
583 if (HYPERVISOR_set_gdt(frames, size / sizeof(struct desc_struct)))
584 BUG();
588 * load_gdt for early boot, when the gdt is only mapped once
590 static void __init xen_load_gdt_boot(const struct desc_ptr *dtr)
592 unsigned long va = dtr->address;
593 unsigned int size = dtr->size + 1;
594 unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
595 unsigned long frames[pages];
596 int f;
599 * A GDT can be up to 64k in size, which corresponds to 8192
600 * 8-byte entries, or 16 4k pages..
603 BUG_ON(size > 65536);
604 BUG_ON(va & ~PAGE_MASK);
606 for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
607 pte_t pte;
608 unsigned long pfn, mfn;
610 pfn = virt_to_pfn(va);
611 mfn = pfn_to_mfn(pfn);
613 pte = pfn_pte(pfn, PAGE_KERNEL_RO);
615 if (HYPERVISOR_update_va_mapping((unsigned long)va, pte, 0))
616 BUG();
618 frames[f] = mfn;
621 if (HYPERVISOR_set_gdt(frames, size / sizeof(struct desc_struct)))
622 BUG();
625 static inline bool desc_equal(const struct desc_struct *d1,
626 const struct desc_struct *d2)
628 return d1->a == d2->a && d1->b == d2->b;
631 static void load_TLS_descriptor(struct thread_struct *t,
632 unsigned int cpu, unsigned int i)
634 struct desc_struct *shadow = &per_cpu(shadow_tls_desc, cpu).desc[i];
635 struct desc_struct *gdt;
636 xmaddr_t maddr;
637 struct multicall_space mc;
639 if (desc_equal(shadow, &t->tls_array[i]))
640 return;
642 *shadow = t->tls_array[i];
644 gdt = get_cpu_gdt_table(cpu);
645 maddr = arbitrary_virt_to_machine(&gdt[GDT_ENTRY_TLS_MIN+i]);
646 mc = __xen_mc_entry(0);
648 MULTI_update_descriptor(mc.mc, maddr.maddr, t->tls_array[i]);
651 static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
654 * XXX sleazy hack: If we're being called in a lazy-cpu zone
655 * and lazy gs handling is enabled, it means we're in a
656 * context switch, and %gs has just been saved. This means we
657 * can zero it out to prevent faults on exit from the
658 * hypervisor if the next process has no %gs. Either way, it
659 * has been saved, and the new value will get loaded properly.
660 * This will go away as soon as Xen has been modified to not
661 * save/restore %gs for normal hypercalls.
663 * On x86_64, this hack is not used for %gs, because gs points
664 * to KERNEL_GS_BASE (and uses it for PDA references), so we
665 * must not zero %gs on x86_64
667 * For x86_64, we need to zero %fs, otherwise we may get an
668 * exception between the new %fs descriptor being loaded and
669 * %fs being effectively cleared at __switch_to().
671 if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
672 #ifdef CONFIG_X86_32
673 lazy_load_gs(0);
674 #else
675 loadsegment(fs, 0);
676 #endif
679 xen_mc_batch();
681 load_TLS_descriptor(t, cpu, 0);
682 load_TLS_descriptor(t, cpu, 1);
683 load_TLS_descriptor(t, cpu, 2);
685 xen_mc_issue(PARAVIRT_LAZY_CPU);
688 #ifdef CONFIG_X86_64
689 static void xen_load_gs_index(unsigned int idx)
691 if (HYPERVISOR_set_segment_base(SEGBASE_GS_USER_SEL, idx))
692 BUG();
694 #endif
696 static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
697 const void *ptr)
699 xmaddr_t mach_lp = arbitrary_virt_to_machine(&dt[entrynum]);
700 u64 entry = *(u64 *)ptr;
702 trace_xen_cpu_write_ldt_entry(dt, entrynum, entry);
704 preempt_disable();
706 xen_mc_flush();
707 if (HYPERVISOR_update_descriptor(mach_lp.maddr, entry))
708 BUG();
710 preempt_enable();
713 static int cvt_gate_to_trap(int vector, const gate_desc *val,
714 struct trap_info *info)
716 unsigned long addr;
718 if (val->type != GATE_TRAP && val->type != GATE_INTERRUPT)
719 return 0;
721 info->vector = vector;
723 addr = gate_offset(*val);
724 #ifdef CONFIG_X86_64
726 * Look for known traps using IST, and substitute them
727 * appropriately. The debugger ones are the only ones we care
728 * about. Xen will handle faults like double_fault,
729 * so we should never see them. Warn if
730 * there's an unexpected IST-using fault handler.
732 if (addr == (unsigned long)debug)
733 addr = (unsigned long)xen_debug;
734 else if (addr == (unsigned long)int3)
735 addr = (unsigned long)xen_int3;
736 else if (addr == (unsigned long)stack_segment)
737 addr = (unsigned long)xen_stack_segment;
738 else if (addr == (unsigned long)double_fault) {
739 /* Don't need to handle these */
740 return 0;
741 #ifdef CONFIG_X86_MCE
742 } else if (addr == (unsigned long)machine_check) {
744 * when xen hypervisor inject vMCE to guest,
745 * use native mce handler to handle it
748 #endif
749 } else if (addr == (unsigned long)nmi)
751 * Use the native version as well.
754 else {
755 /* Some other trap using IST? */
756 if (WARN_ON(val->ist != 0))
757 return 0;
759 #endif /* CONFIG_X86_64 */
760 info->address = addr;
762 info->cs = gate_segment(*val);
763 info->flags = val->dpl;
764 /* interrupt gates clear IF */
765 if (val->type == GATE_INTERRUPT)
766 info->flags |= 1 << 2;
768 return 1;
771 /* Locations of each CPU's IDT */
772 static DEFINE_PER_CPU(struct desc_ptr, idt_desc);
774 /* Set an IDT entry. If the entry is part of the current IDT, then
775 also update Xen. */
776 static void xen_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g)
778 unsigned long p = (unsigned long)&dt[entrynum];
779 unsigned long start, end;
781 trace_xen_cpu_write_idt_entry(dt, entrynum, g);
783 preempt_disable();
785 start = __this_cpu_read(idt_desc.address);
786 end = start + __this_cpu_read(idt_desc.size) + 1;
788 xen_mc_flush();
790 native_write_idt_entry(dt, entrynum, g);
792 if (p >= start && (p + 8) <= end) {
793 struct trap_info info[2];
795 info[1].address = 0;
797 if (cvt_gate_to_trap(entrynum, g, &info[0]))
798 if (HYPERVISOR_set_trap_table(info))
799 BUG();
802 preempt_enable();
805 static void xen_convert_trap_info(const struct desc_ptr *desc,
806 struct trap_info *traps)
808 unsigned in, out, count;
810 count = (desc->size+1) / sizeof(gate_desc);
811 BUG_ON(count > 256);
813 for (in = out = 0; in < count; in++) {
814 gate_desc *entry = (gate_desc*)(desc->address) + in;
816 if (cvt_gate_to_trap(in, entry, &traps[out]))
817 out++;
819 traps[out].address = 0;
822 void xen_copy_trap_info(struct trap_info *traps)
824 const struct desc_ptr *desc = &__get_cpu_var(idt_desc);
826 xen_convert_trap_info(desc, traps);
829 /* Load a new IDT into Xen. In principle this can be per-CPU, so we
830 hold a spinlock to protect the static traps[] array (static because
831 it avoids allocation, and saves stack space). */
832 static void xen_load_idt(const struct desc_ptr *desc)
834 static DEFINE_SPINLOCK(lock);
835 static struct trap_info traps[257];
837 trace_xen_cpu_load_idt(desc);
839 spin_lock(&lock);
841 __get_cpu_var(idt_desc) = *desc;
843 xen_convert_trap_info(desc, traps);
845 xen_mc_flush();
846 if (HYPERVISOR_set_trap_table(traps))
847 BUG();
849 spin_unlock(&lock);
852 /* Write a GDT descriptor entry. Ignore LDT descriptors, since
853 they're handled differently. */
854 static void xen_write_gdt_entry(struct desc_struct *dt, int entry,
855 const void *desc, int type)
857 trace_xen_cpu_write_gdt_entry(dt, entry, desc, type);
859 preempt_disable();
861 switch (type) {
862 case DESC_LDT:
863 case DESC_TSS:
864 /* ignore */
865 break;
867 default: {
868 xmaddr_t maddr = arbitrary_virt_to_machine(&dt[entry]);
870 xen_mc_flush();
871 if (HYPERVISOR_update_descriptor(maddr.maddr, *(u64 *)desc))
872 BUG();
877 preempt_enable();
881 * Version of write_gdt_entry for use at early boot-time needed to
882 * update an entry as simply as possible.
884 static void __init xen_write_gdt_entry_boot(struct desc_struct *dt, int entry,
885 const void *desc, int type)
887 trace_xen_cpu_write_gdt_entry(dt, entry, desc, type);
889 switch (type) {
890 case DESC_LDT:
891 case DESC_TSS:
892 /* ignore */
893 break;
895 default: {
896 xmaddr_t maddr = virt_to_machine(&dt[entry]);
898 if (HYPERVISOR_update_descriptor(maddr.maddr, *(u64 *)desc))
899 dt[entry] = *(struct desc_struct *)desc;
905 static void xen_load_sp0(struct tss_struct *tss,
906 struct thread_struct *thread)
908 struct multicall_space mcs;
910 mcs = xen_mc_entry(0);
911 MULTI_stack_switch(mcs.mc, __KERNEL_DS, thread->sp0);
912 xen_mc_issue(PARAVIRT_LAZY_CPU);
915 static void xen_set_iopl_mask(unsigned mask)
917 struct physdev_set_iopl set_iopl;
919 /* Force the change at ring 0. */
920 set_iopl.iopl = (mask == 0) ? 1 : (mask >> 12) & 3;
921 HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
924 static void xen_io_delay(void)
928 #ifdef CONFIG_X86_LOCAL_APIC
929 static unsigned long xen_set_apic_id(unsigned int x)
931 WARN_ON(1);
932 return x;
934 static unsigned int xen_get_apic_id(unsigned long x)
936 return ((x)>>24) & 0xFFu;
938 static u32 xen_apic_read(u32 reg)
940 struct xen_platform_op op = {
941 .cmd = XENPF_get_cpuinfo,
942 .interface_version = XENPF_INTERFACE_VERSION,
943 .u.pcpu_info.xen_cpuid = 0,
945 int ret = 0;
947 /* Shouldn't need this as APIC is turned off for PV, and we only
948 * get called on the bootup processor. But just in case. */
949 if (!xen_initial_domain() || smp_processor_id())
950 return 0;
952 if (reg == APIC_LVR)
953 return 0x10;
955 if (reg != APIC_ID)
956 return 0;
958 ret = HYPERVISOR_dom0_op(&op);
959 if (ret)
960 return 0;
962 return op.u.pcpu_info.apic_id << 24;
965 static void xen_apic_write(u32 reg, u32 val)
967 /* Warn to see if there's any stray references */
968 WARN_ON(1);
971 static u64 xen_apic_icr_read(void)
973 return 0;
976 static void xen_apic_icr_write(u32 low, u32 id)
978 /* Warn to see if there's any stray references */
979 WARN_ON(1);
982 static void xen_apic_wait_icr_idle(void)
984 return;
987 static u32 xen_safe_apic_wait_icr_idle(void)
989 return 0;
992 static void set_xen_basic_apic_ops(void)
994 apic->read = xen_apic_read;
995 apic->write = xen_apic_write;
996 apic->icr_read = xen_apic_icr_read;
997 apic->icr_write = xen_apic_icr_write;
998 apic->wait_icr_idle = xen_apic_wait_icr_idle;
999 apic->safe_wait_icr_idle = xen_safe_apic_wait_icr_idle;
1000 apic->set_apic_id = xen_set_apic_id;
1001 apic->get_apic_id = xen_get_apic_id;
1003 #ifdef CONFIG_SMP
1004 apic->send_IPI_allbutself = xen_send_IPI_allbutself;
1005 apic->send_IPI_mask_allbutself = xen_send_IPI_mask_allbutself;
1006 apic->send_IPI_mask = xen_send_IPI_mask;
1007 apic->send_IPI_all = xen_send_IPI_all;
1008 apic->send_IPI_self = xen_send_IPI_self;
1009 #endif
1012 #endif
1014 static void xen_clts(void)
1016 struct multicall_space mcs;
1018 mcs = xen_mc_entry(0);
1020 MULTI_fpu_taskswitch(mcs.mc, 0);
1022 xen_mc_issue(PARAVIRT_LAZY_CPU);
1025 static DEFINE_PER_CPU(unsigned long, xen_cr0_value);
1027 static unsigned long xen_read_cr0(void)
1029 unsigned long cr0 = this_cpu_read(xen_cr0_value);
1031 if (unlikely(cr0 == 0)) {
1032 cr0 = native_read_cr0();
1033 this_cpu_write(xen_cr0_value, cr0);
1036 return cr0;
1039 static void xen_write_cr0(unsigned long cr0)
1041 struct multicall_space mcs;
1043 this_cpu_write(xen_cr0_value, cr0);
1045 /* Only pay attention to cr0.TS; everything else is
1046 ignored. */
1047 mcs = xen_mc_entry(0);
1049 MULTI_fpu_taskswitch(mcs.mc, (cr0 & X86_CR0_TS) != 0);
1051 xen_mc_issue(PARAVIRT_LAZY_CPU);
1054 static void xen_write_cr4(unsigned long cr4)
1056 cr4 &= ~X86_CR4_PGE;
1057 cr4 &= ~X86_CR4_PSE;
1059 native_write_cr4(cr4);
1061 #ifdef CONFIG_X86_64
1062 static inline unsigned long xen_read_cr8(void)
1064 return 0;
1066 static inline void xen_write_cr8(unsigned long val)
1068 BUG_ON(val);
1070 #endif
1071 static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
1073 int ret;
1075 ret = 0;
1077 switch (msr) {
1078 #ifdef CONFIG_X86_64
1079 unsigned which;
1080 u64 base;
1082 case MSR_FS_BASE: which = SEGBASE_FS; goto set;
1083 case MSR_KERNEL_GS_BASE: which = SEGBASE_GS_USER; goto set;
1084 case MSR_GS_BASE: which = SEGBASE_GS_KERNEL; goto set;
1086 set:
1087 base = ((u64)high << 32) | low;
1088 if (HYPERVISOR_set_segment_base(which, base) != 0)
1089 ret = -EIO;
1090 break;
1091 #endif
1093 case MSR_STAR:
1094 case MSR_CSTAR:
1095 case MSR_LSTAR:
1096 case MSR_SYSCALL_MASK:
1097 case MSR_IA32_SYSENTER_CS:
1098 case MSR_IA32_SYSENTER_ESP:
1099 case MSR_IA32_SYSENTER_EIP:
1100 /* Fast syscall setup is all done in hypercalls, so
1101 these are all ignored. Stub them out here to stop
1102 Xen console noise. */
1103 break;
1105 case MSR_IA32_CR_PAT:
1106 if (smp_processor_id() == 0)
1107 xen_set_pat(((u64)high << 32) | low);
1108 break;
1110 default:
1111 ret = native_write_msr_safe(msr, low, high);
1114 return ret;
1117 void xen_setup_shared_info(void)
1119 if (!xen_feature(XENFEAT_auto_translated_physmap)) {
1120 set_fixmap(FIX_PARAVIRT_BOOTMAP,
1121 xen_start_info->shared_info);
1123 HYPERVISOR_shared_info =
1124 (struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
1125 } else
1126 HYPERVISOR_shared_info =
1127 (struct shared_info *)__va(xen_start_info->shared_info);
1129 #ifndef CONFIG_SMP
1130 /* In UP this is as good a place as any to set up shared info */
1131 xen_setup_vcpu_info_placement();
1132 #endif
1134 xen_setup_mfn_list_list();
1137 /* This is called once we have the cpu_possible_mask */
1138 void xen_setup_vcpu_info_placement(void)
1140 int cpu;
1142 for_each_possible_cpu(cpu)
1143 xen_vcpu_setup(cpu);
1145 /* xen_vcpu_setup managed to place the vcpu_info within the
1146 * percpu area for all cpus, so make use of it. Note that for
1147 * PVH we want to use native IRQ mechanism. */
1148 if (have_vcpu_info_placement && !xen_pvh_domain()) {
1149 pv_irq_ops.save_fl = __PV_IS_CALLEE_SAVE(xen_save_fl_direct);
1150 pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(xen_restore_fl_direct);
1151 pv_irq_ops.irq_disable = __PV_IS_CALLEE_SAVE(xen_irq_disable_direct);
1152 pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(xen_irq_enable_direct);
1153 pv_mmu_ops.read_cr2 = xen_read_cr2_direct;
1157 static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
1158 unsigned long addr, unsigned len)
1160 char *start, *end, *reloc;
1161 unsigned ret;
1163 start = end = reloc = NULL;
1165 #define SITE(op, x) \
1166 case PARAVIRT_PATCH(op.x): \
1167 if (have_vcpu_info_placement) { \
1168 start = (char *)xen_##x##_direct; \
1169 end = xen_##x##_direct_end; \
1170 reloc = xen_##x##_direct_reloc; \
1172 goto patch_site
1174 switch (type) {
1175 SITE(pv_irq_ops, irq_enable);
1176 SITE(pv_irq_ops, irq_disable);
1177 SITE(pv_irq_ops, save_fl);
1178 SITE(pv_irq_ops, restore_fl);
1179 #undef SITE
1181 patch_site:
1182 if (start == NULL || (end-start) > len)
1183 goto default_patch;
1185 ret = paravirt_patch_insns(insnbuf, len, start, end);
1187 /* Note: because reloc is assigned from something that
1188 appears to be an array, gcc assumes it's non-null,
1189 but doesn't know its relationship with start and
1190 end. */
1191 if (reloc > start && reloc < end) {
1192 int reloc_off = reloc - start;
1193 long *relocp = (long *)(insnbuf + reloc_off);
1194 long delta = start - (char *)addr;
1196 *relocp += delta;
1198 break;
1200 default_patch:
1201 default:
1202 ret = paravirt_patch_default(type, clobbers, insnbuf,
1203 addr, len);
1204 break;
1207 return ret;
1210 static const struct pv_info xen_info __initconst = {
1211 .paravirt_enabled = 1,
1212 .shared_kernel_pmd = 0,
1214 #ifdef CONFIG_X86_64
1215 .extra_user_64bit_cs = FLAT_USER_CS64,
1216 #endif
1218 .name = "Xen",
1221 static const struct pv_init_ops xen_init_ops __initconst = {
1222 .patch = xen_patch,
1225 static const struct pv_cpu_ops xen_cpu_ops __initconst = {
1226 .cpuid = xen_cpuid,
1228 .set_debugreg = xen_set_debugreg,
1229 .get_debugreg = xen_get_debugreg,
1231 .clts = xen_clts,
1233 .read_cr0 = xen_read_cr0,
1234 .write_cr0 = xen_write_cr0,
1236 .read_cr4 = native_read_cr4,
1237 .read_cr4_safe = native_read_cr4_safe,
1238 .write_cr4 = xen_write_cr4,
1240 #ifdef CONFIG_X86_64
1241 .read_cr8 = xen_read_cr8,
1242 .write_cr8 = xen_write_cr8,
1243 #endif
1245 .wbinvd = native_wbinvd,
1247 .read_msr = native_read_msr_safe,
1248 .write_msr = xen_write_msr_safe,
1250 .read_tsc = native_read_tsc,
1251 .read_pmc = native_read_pmc,
1253 .read_tscp = native_read_tscp,
1255 .iret = xen_iret,
1256 .irq_enable_sysexit = xen_sysexit,
1257 #ifdef CONFIG_X86_64
1258 .usergs_sysret32 = xen_sysret32,
1259 .usergs_sysret64 = xen_sysret64,
1260 #endif
1262 .load_tr_desc = paravirt_nop,
1263 .set_ldt = xen_set_ldt,
1264 .load_gdt = xen_load_gdt,
1265 .load_idt = xen_load_idt,
1266 .load_tls = xen_load_tls,
1267 #ifdef CONFIG_X86_64
1268 .load_gs_index = xen_load_gs_index,
1269 #endif
1271 .alloc_ldt = xen_alloc_ldt,
1272 .free_ldt = xen_free_ldt,
1274 .store_idt = native_store_idt,
1275 .store_tr = xen_store_tr,
1277 .write_ldt_entry = xen_write_ldt_entry,
1278 .write_gdt_entry = xen_write_gdt_entry,
1279 .write_idt_entry = xen_write_idt_entry,
1280 .load_sp0 = xen_load_sp0,
1282 .set_iopl_mask = xen_set_iopl_mask,
1283 .io_delay = xen_io_delay,
1285 /* Xen takes care of %gs when switching to usermode for us */
1286 .swapgs = paravirt_nop,
1288 .start_context_switch = paravirt_start_context_switch,
1289 .end_context_switch = xen_end_context_switch,
1292 static const struct pv_apic_ops xen_apic_ops __initconst = {
1293 #ifdef CONFIG_X86_LOCAL_APIC
1294 .startup_ipi_hook = paravirt_nop,
1295 #endif
1298 static void xen_reboot(int reason)
1300 struct sched_shutdown r = { .reason = reason };
1302 if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r))
1303 BUG();
1306 static void xen_restart(char *msg)
1308 xen_reboot(SHUTDOWN_reboot);
1311 static void xen_emergency_restart(void)
1313 xen_reboot(SHUTDOWN_reboot);
1316 static void xen_machine_halt(void)
1318 xen_reboot(SHUTDOWN_poweroff);
1321 static void xen_machine_power_off(void)
1323 if (pm_power_off)
1324 pm_power_off();
1325 xen_reboot(SHUTDOWN_poweroff);
1328 static void xen_crash_shutdown(struct pt_regs *regs)
1330 xen_reboot(SHUTDOWN_crash);
1333 static int
1334 xen_panic_event(struct notifier_block *this, unsigned long event, void *ptr)
1336 xen_reboot(SHUTDOWN_crash);
1337 return NOTIFY_DONE;
1340 static struct notifier_block xen_panic_block = {
1341 .notifier_call= xen_panic_event,
1344 int xen_panic_handler_init(void)
1346 atomic_notifier_chain_register(&panic_notifier_list, &xen_panic_block);
1347 return 0;
1350 static const struct machine_ops xen_machine_ops __initconst = {
1351 .restart = xen_restart,
1352 .halt = xen_machine_halt,
1353 .power_off = xen_machine_power_off,
1354 .shutdown = xen_machine_halt,
1355 .crash_shutdown = xen_crash_shutdown,
1356 .emergency_restart = xen_emergency_restart,
1359 static void __init xen_boot_params_init_edd(void)
1361 #if IS_ENABLED(CONFIG_EDD)
1362 struct xen_platform_op op;
1363 struct edd_info *edd_info;
1364 u32 *mbr_signature;
1365 unsigned nr;
1366 int ret;
1368 edd_info = boot_params.eddbuf;
1369 mbr_signature = boot_params.edd_mbr_sig_buffer;
1371 op.cmd = XENPF_firmware_info;
1373 op.u.firmware_info.type = XEN_FW_DISK_INFO;
1374 for (nr = 0; nr < EDDMAXNR; nr++) {
1375 struct edd_info *info = edd_info + nr;
1377 op.u.firmware_info.index = nr;
1378 info->params.length = sizeof(info->params);
1379 set_xen_guest_handle(op.u.firmware_info.u.disk_info.edd_params,
1380 &info->params);
1381 ret = HYPERVISOR_dom0_op(&op);
1382 if (ret)
1383 break;
1385 #define C(x) info->x = op.u.firmware_info.u.disk_info.x
1386 C(device);
1387 C(version);
1388 C(interface_support);
1389 C(legacy_max_cylinder);
1390 C(legacy_max_head);
1391 C(legacy_sectors_per_track);
1392 #undef C
1394 boot_params.eddbuf_entries = nr;
1396 op.u.firmware_info.type = XEN_FW_DISK_MBR_SIGNATURE;
1397 for (nr = 0; nr < EDD_MBR_SIG_MAX; nr++) {
1398 op.u.firmware_info.index = nr;
1399 ret = HYPERVISOR_dom0_op(&op);
1400 if (ret)
1401 break;
1402 mbr_signature[nr] = op.u.firmware_info.u.disk_mbr_signature.mbr_signature;
1404 boot_params.edd_mbr_sig_buf_entries = nr;
1405 #endif
1409 * Set up the GDT and segment registers for -fstack-protector. Until
1410 * we do this, we have to be careful not to call any stack-protected
1411 * function, which is most of the kernel.
1413 * Note, that it is __ref because the only caller of this after init
1414 * is PVH which is not going to use xen_load_gdt_boot or other
1415 * __init functions.
1417 static void __ref xen_setup_gdt(int cpu)
1419 if (xen_feature(XENFEAT_auto_translated_physmap)) {
1420 #ifdef CONFIG_X86_64
1421 unsigned long dummy;
1423 load_percpu_segment(cpu); /* We need to access per-cpu area */
1424 switch_to_new_gdt(cpu); /* GDT and GS set */
1426 /* We are switching of the Xen provided GDT to our HVM mode
1427 * GDT. The new GDT has __KERNEL_CS with CS.L = 1
1428 * and we are jumping to reload it.
1430 asm volatile ("pushq %0\n"
1431 "leaq 1f(%%rip),%0\n"
1432 "pushq %0\n"
1433 "lretq\n"
1434 "1:\n"
1435 : "=&r" (dummy) : "0" (__KERNEL_CS));
1438 * While not needed, we also set the %es, %ds, and %fs
1439 * to zero. We don't care about %ss as it is NULL.
1440 * Strictly speaking this is not needed as Xen zeros those
1441 * out (and also MSR_FS_BASE, MSR_GS_BASE, MSR_KERNEL_GS_BASE)
1443 * Linux zeros them in cpu_init() and in secondary_startup_64
1444 * (for BSP).
1446 loadsegment(es, 0);
1447 loadsegment(ds, 0);
1448 loadsegment(fs, 0);
1449 #else
1450 /* PVH: TODO Implement. */
1451 BUG();
1452 #endif
1453 return; /* PVH does not need any PV GDT ops. */
1455 pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry_boot;
1456 pv_cpu_ops.load_gdt = xen_load_gdt_boot;
1458 setup_stack_canary_segment(0);
1459 switch_to_new_gdt(0);
1461 pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry;
1462 pv_cpu_ops.load_gdt = xen_load_gdt;
1466 * A PV guest starts with default flags that are not set for PVH, set them
1467 * here asap.
1469 static void xen_pvh_set_cr_flags(int cpu)
1472 /* Some of these are setup in 'secondary_startup_64'. The others:
1473 * X86_CR0_TS, X86_CR0_PE, X86_CR0_ET are set by Xen for HVM guests
1474 * (which PVH shared codepaths), while X86_CR0_PG is for PVH. */
1475 write_cr0(read_cr0() | X86_CR0_MP | X86_CR0_NE | X86_CR0_WP | X86_CR0_AM);
1477 if (!cpu)
1478 return;
1480 * For BSP, PSE PGE are set in probe_page_size_mask(), for APs
1481 * set them here. For all, OSFXSR OSXMMEXCPT are set in fpu_init.
1483 if (cpu_has_pse)
1484 set_in_cr4(X86_CR4_PSE);
1486 if (cpu_has_pge)
1487 set_in_cr4(X86_CR4_PGE);
1491 * Note, that it is ref - because the only caller of this after init
1492 * is PVH which is not going to use xen_load_gdt_boot or other
1493 * __init functions.
1495 void __ref xen_pvh_secondary_vcpu_init(int cpu)
1497 xen_setup_gdt(cpu);
1498 xen_pvh_set_cr_flags(cpu);
1501 static void __init xen_pvh_early_guest_init(void)
1503 if (!xen_feature(XENFEAT_auto_translated_physmap))
1504 return;
1506 if (!xen_feature(XENFEAT_hvm_callback_vector))
1507 return;
1509 xen_have_vector_callback = 1;
1510 xen_pvh_set_cr_flags(0);
1512 #ifdef CONFIG_X86_32
1513 BUG(); /* PVH: Implement proper support. */
1514 #endif
1517 /* First C function to be called on Xen boot */
1518 asmlinkage void __init xen_start_kernel(void)
1520 struct physdev_set_iopl set_iopl;
1521 int rc;
1523 if (!xen_start_info)
1524 return;
1526 xen_domain_type = XEN_PV_DOMAIN;
1528 xen_setup_features();
1529 xen_pvh_early_guest_init();
1530 xen_setup_machphys_mapping();
1532 /* Install Xen paravirt ops */
1533 pv_info = xen_info;
1534 pv_init_ops = xen_init_ops;
1535 pv_apic_ops = xen_apic_ops;
1536 if (!xen_pvh_domain())
1537 pv_cpu_ops = xen_cpu_ops;
1539 x86_init.resources.memory_setup = xen_memory_setup;
1540 x86_init.oem.arch_setup = xen_arch_setup;
1541 x86_init.oem.banner = xen_banner;
1543 xen_init_time_ops();
1546 * Set up some pagetable state before starting to set any ptes.
1549 xen_init_mmu_ops();
1551 /* Prevent unwanted bits from being set in PTEs. */
1552 __supported_pte_mask &= ~_PAGE_GLOBAL;
1553 #if 0
1554 if (!xen_initial_domain())
1555 #endif
1556 __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
1558 __supported_pte_mask |= _PAGE_IOMAP;
1561 * Prevent page tables from being allocated in highmem, even
1562 * if CONFIG_HIGHPTE is enabled.
1564 __userpte_alloc_gfp &= ~__GFP_HIGHMEM;
1566 /* Work out if we support NX */
1567 x86_configure_nx();
1569 /* Get mfn list */
1570 xen_build_dynamic_phys_to_machine();
1573 * Set up kernel GDT and segment registers, mainly so that
1574 * -fstack-protector code can be executed.
1576 xen_setup_gdt(0);
1578 xen_init_irq_ops();
1579 xen_init_cpuid_mask();
1581 #ifdef CONFIG_X86_LOCAL_APIC
1583 * set up the basic apic ops.
1585 set_xen_basic_apic_ops();
1586 #endif
1588 if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
1589 pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
1590 pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
1593 machine_ops = xen_machine_ops;
1596 * The only reliable way to retain the initial address of the
1597 * percpu gdt_page is to remember it here, so we can go and
1598 * mark it RW later, when the initial percpu area is freed.
1600 xen_initial_gdt = &per_cpu(gdt_page, 0);
1602 xen_smp_init();
1604 #ifdef CONFIG_ACPI_NUMA
1606 * The pages we from Xen are not related to machine pages, so
1607 * any NUMA information the kernel tries to get from ACPI will
1608 * be meaningless. Prevent it from trying.
1610 acpi_numa = -1;
1611 #endif
1612 #ifdef CONFIG_X86_PAT
1614 * For right now disable the PAT. We should remove this once
1615 * git commit 8eaffa67b43e99ae581622c5133e20b0f48bcef1
1616 * (xen/pat: Disable PAT support for now) is reverted.
1618 pat_enabled = 0;
1619 #endif
1620 /* Don't do the full vcpu_info placement stuff until we have a
1621 possible map and a non-dummy shared_info. */
1622 per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
1624 local_irq_disable();
1625 early_boot_irqs_disabled = true;
1627 xen_raw_console_write("mapping kernel into physical memory\n");
1628 xen_setup_kernel_pagetable((pgd_t *)xen_start_info->pt_base, xen_start_info->nr_pages);
1630 /* Allocate and initialize top and mid mfn levels for p2m structure */
1631 xen_build_mfn_list_list();
1633 /* keep using Xen gdt for now; no urgent need to change it */
1635 #ifdef CONFIG_X86_32
1636 pv_info.kernel_rpl = 1;
1637 if (xen_feature(XENFEAT_supervisor_mode_kernel))
1638 pv_info.kernel_rpl = 0;
1639 #else
1640 pv_info.kernel_rpl = 0;
1641 #endif
1642 /* set the limit of our address space */
1643 xen_reserve_top();
1645 /* PVH: runs at default kernel iopl of 0 */
1646 if (!xen_pvh_domain()) {
1648 * We used to do this in xen_arch_setup, but that is too late
1649 * on AMD were early_cpu_init (run before ->arch_setup()) calls
1650 * early_amd_init which pokes 0xcf8 port.
1652 set_iopl.iopl = 1;
1653 rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
1654 if (rc != 0)
1655 xen_raw_printk("physdev_op failed %d\n", rc);
1658 #ifdef CONFIG_X86_32
1659 /* set up basic CPUID stuff */
1660 cpu_detect(&new_cpu_data);
1661 set_cpu_cap(&new_cpu_data, X86_FEATURE_FPU);
1662 new_cpu_data.wp_works_ok = 1;
1663 new_cpu_data.x86_capability[0] = cpuid_edx(1);
1664 #endif
1666 /* Poke various useful things into boot_params */
1667 boot_params.hdr.type_of_loader = (9 << 4) | 0;
1668 boot_params.hdr.ramdisk_image = xen_start_info->mod_start
1669 ? __pa(xen_start_info->mod_start) : 0;
1670 boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
1671 boot_params.hdr.cmd_line_ptr = __pa(xen_start_info->cmd_line);
1673 if (!xen_initial_domain()) {
1674 add_preferred_console("xenboot", 0, NULL);
1675 add_preferred_console("tty", 0, NULL);
1676 add_preferred_console("hvc", 0, NULL);
1677 if (pci_xen)
1678 x86_init.pci.arch_init = pci_xen_init;
1679 } else {
1680 const struct dom0_vga_console_info *info =
1681 (void *)((char *)xen_start_info +
1682 xen_start_info->console.dom0.info_off);
1683 struct xen_platform_op op = {
1684 .cmd = XENPF_firmware_info,
1685 .interface_version = XENPF_INTERFACE_VERSION,
1686 .u.firmware_info.type = XEN_FW_KBD_SHIFT_FLAGS,
1689 xen_init_vga(info, xen_start_info->console.dom0.info_size);
1690 xen_start_info->console.domU.mfn = 0;
1691 xen_start_info->console.domU.evtchn = 0;
1693 if (HYPERVISOR_dom0_op(&op) == 0)
1694 boot_params.kbd_status = op.u.firmware_info.u.kbd_shift_flags;
1696 xen_init_apic();
1698 /* Make sure ACS will be enabled */
1699 pci_request_acs();
1701 xen_acpi_sleep_register();
1703 /* Avoid searching for BIOS MP tables */
1704 x86_init.mpparse.find_smp_config = x86_init_noop;
1705 x86_init.mpparse.get_smp_config = x86_init_uint_noop;
1707 xen_boot_params_init_edd();
1709 #ifdef CONFIG_PCI
1710 /* PCI BIOS service won't work from a PV guest. */
1711 pci_probe &= ~PCI_PROBE_BIOS;
1712 #endif
1713 xen_raw_console_write("about to get started...\n");
1715 xen_setup_runstate_info(0);
1717 /* Start the world */
1718 #ifdef CONFIG_X86_32
1719 i386_start_kernel();
1720 #else
1721 x86_64_start_reservations((char *)__pa_symbol(&boot_params));
1722 #endif
1725 void __ref xen_hvm_init_shared_info(void)
1727 int cpu;
1728 struct xen_add_to_physmap xatp;
1729 static struct shared_info *shared_info_page = 0;
1731 if (!shared_info_page)
1732 shared_info_page = (struct shared_info *)
1733 extend_brk(PAGE_SIZE, PAGE_SIZE);
1734 xatp.domid = DOMID_SELF;
1735 xatp.idx = 0;
1736 xatp.space = XENMAPSPACE_shared_info;
1737 xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT;
1738 if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp))
1739 BUG();
1741 HYPERVISOR_shared_info = (struct shared_info *)shared_info_page;
1743 /* xen_vcpu is a pointer to the vcpu_info struct in the shared_info
1744 * page, we use it in the event channel upcall and in some pvclock
1745 * related functions. We don't need the vcpu_info placement
1746 * optimizations because we don't use any pv_mmu or pv_irq op on
1747 * HVM.
1748 * When xen_hvm_init_shared_info is run at boot time only vcpu 0 is
1749 * online but xen_hvm_init_shared_info is run at resume time too and
1750 * in that case multiple vcpus might be online. */
1751 for_each_online_cpu(cpu) {
1752 /* Leave it to be NULL. */
1753 if (cpu >= MAX_VIRT_CPUS)
1754 continue;
1755 per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
1759 #ifdef CONFIG_XEN_PVHVM
1760 static void __init init_hvm_pv_info(void)
1762 int major, minor;
1763 uint32_t eax, ebx, ecx, edx, pages, msr, base;
1764 u64 pfn;
1766 base = xen_cpuid_base();
1767 cpuid(base + 1, &eax, &ebx, &ecx, &edx);
1769 major = eax >> 16;
1770 minor = eax & 0xffff;
1771 printk(KERN_INFO "Xen version %d.%d.\n", major, minor);
1773 cpuid(base + 2, &pages, &msr, &ecx, &edx);
1775 pfn = __pa(hypercall_page);
1776 wrmsr_safe(msr, (u32)pfn, (u32)(pfn >> 32));
1778 xen_setup_features();
1780 pv_info.name = "Xen HVM";
1782 xen_domain_type = XEN_HVM_DOMAIN;
1785 static int xen_hvm_cpu_notify(struct notifier_block *self, unsigned long action,
1786 void *hcpu)
1788 int cpu = (long)hcpu;
1789 switch (action) {
1790 case CPU_UP_PREPARE:
1791 xen_vcpu_setup(cpu);
1792 if (xen_have_vector_callback) {
1793 if (xen_feature(XENFEAT_hvm_safe_pvclock))
1794 xen_setup_timer(cpu);
1796 break;
1797 default:
1798 break;
1800 return NOTIFY_OK;
1803 static struct notifier_block xen_hvm_cpu_notifier = {
1804 .notifier_call = xen_hvm_cpu_notify,
1807 static void __init xen_hvm_guest_init(void)
1809 init_hvm_pv_info();
1811 xen_hvm_init_shared_info();
1813 xen_panic_handler_init();
1815 if (xen_feature(XENFEAT_hvm_callback_vector))
1816 xen_have_vector_callback = 1;
1817 xen_hvm_smp_init();
1818 register_cpu_notifier(&xen_hvm_cpu_notifier);
1819 xen_unplug_emulated_devices();
1820 x86_init.irqs.intr_init = xen_init_IRQ;
1821 xen_hvm_init_time_ops();
1822 xen_hvm_init_mmu_ops();
1825 static uint32_t __init xen_hvm_platform(void)
1827 if (xen_pv_domain())
1828 return 0;
1830 return xen_cpuid_base();
1833 bool xen_hvm_need_lapic(void)
1835 if (xen_pv_domain())
1836 return false;
1837 if (!xen_hvm_domain())
1838 return false;
1839 if (xen_feature(XENFEAT_hvm_pirqs) && xen_have_vector_callback)
1840 return false;
1841 return true;
1843 EXPORT_SYMBOL_GPL(xen_hvm_need_lapic);
1845 const struct hypervisor_x86 x86_hyper_xen_hvm __refconst = {
1846 .name = "Xen HVM",
1847 .detect = xen_hvm_platform,
1848 .init_platform = xen_hvm_guest_init,
1849 .x2apic_available = xen_x2apic_para_available,
1851 EXPORT_SYMBOL(x86_hyper_xen_hvm);
1852 #endif