1 /* esp_scsi.c: ESP SCSI driver.
3 * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
6 #include <linux/kernel.h>
7 #include <linux/types.h>
8 #include <linux/slab.h>
9 #include <linux/delay.h>
10 #include <linux/list.h>
11 #include <linux/completion.h>
12 #include <linux/kallsyms.h>
13 #include <linux/module.h>
14 #include <linux/moduleparam.h>
15 #include <linux/init.h>
16 #include <linux/irqreturn.h>
22 #include <scsi/scsi.h>
23 #include <scsi/scsi_host.h>
24 #include <scsi/scsi_cmnd.h>
25 #include <scsi/scsi_device.h>
26 #include <scsi/scsi_tcq.h>
27 #include <scsi/scsi_dbg.h>
28 #include <scsi/scsi_transport_spi.h>
32 #define DRV_MODULE_NAME "esp"
33 #define PFX DRV_MODULE_NAME ": "
34 #define DRV_VERSION "2.000"
35 #define DRV_MODULE_RELDATE "April 19, 2007"
37 /* SCSI bus reset settle time in seconds. */
38 static int esp_bus_reset_settle
= 3;
41 #define ESP_DEBUG_INTR 0x00000001
42 #define ESP_DEBUG_SCSICMD 0x00000002
43 #define ESP_DEBUG_RESET 0x00000004
44 #define ESP_DEBUG_MSGIN 0x00000008
45 #define ESP_DEBUG_MSGOUT 0x00000010
46 #define ESP_DEBUG_CMDDONE 0x00000020
47 #define ESP_DEBUG_DISCONNECT 0x00000040
48 #define ESP_DEBUG_DATASTART 0x00000080
49 #define ESP_DEBUG_DATADONE 0x00000100
50 #define ESP_DEBUG_RECONNECT 0x00000200
51 #define ESP_DEBUG_AUTOSENSE 0x00000400
52 #define ESP_DEBUG_EVENT 0x00000800
53 #define ESP_DEBUG_COMMAND 0x00001000
55 #define esp_log_intr(f, a...) \
56 do { if (esp_debug & ESP_DEBUG_INTR) \
57 shost_printk(KERN_DEBUG, esp->host, f, ## a); \
60 #define esp_log_reset(f, a...) \
61 do { if (esp_debug & ESP_DEBUG_RESET) \
62 shost_printk(KERN_DEBUG, esp->host, f, ## a); \
65 #define esp_log_msgin(f, a...) \
66 do { if (esp_debug & ESP_DEBUG_MSGIN) \
67 shost_printk(KERN_DEBUG, esp->host, f, ## a); \
70 #define esp_log_msgout(f, a...) \
71 do { if (esp_debug & ESP_DEBUG_MSGOUT) \
72 shost_printk(KERN_DEBUG, esp->host, f, ## a); \
75 #define esp_log_cmddone(f, a...) \
76 do { if (esp_debug & ESP_DEBUG_CMDDONE) \
77 shost_printk(KERN_DEBUG, esp->host, f, ## a); \
80 #define esp_log_disconnect(f, a...) \
81 do { if (esp_debug & ESP_DEBUG_DISCONNECT) \
82 shost_printk(KERN_DEBUG, esp->host, f, ## a); \
85 #define esp_log_datastart(f, a...) \
86 do { if (esp_debug & ESP_DEBUG_DATASTART) \
87 shost_printk(KERN_DEBUG, esp->host, f, ## a); \
90 #define esp_log_datadone(f, a...) \
91 do { if (esp_debug & ESP_DEBUG_DATADONE) \
92 shost_printk(KERN_DEBUG, esp->host, f, ## a); \
95 #define esp_log_reconnect(f, a...) \
96 do { if (esp_debug & ESP_DEBUG_RECONNECT) \
97 shost_printk(KERN_DEBUG, esp->host, f, ## a); \
100 #define esp_log_autosense(f, a...) \
101 do { if (esp_debug & ESP_DEBUG_AUTOSENSE) \
102 shost_printk(KERN_DEBUG, esp->host, f, ## a); \
105 #define esp_log_event(f, a...) \
106 do { if (esp_debug & ESP_DEBUG_EVENT) \
107 shost_printk(KERN_DEBUG, esp->host, f, ## a); \
110 #define esp_log_command(f, a...) \
111 do { if (esp_debug & ESP_DEBUG_COMMAND) \
112 shost_printk(KERN_DEBUG, esp->host, f, ## a); \
115 #define esp_read8(REG) esp->ops->esp_read8(esp, REG)
116 #define esp_write8(VAL,REG) esp->ops->esp_write8(esp, VAL, REG)
118 static void esp_log_fill_regs(struct esp
*esp
,
119 struct esp_event_ent
*p
)
122 p
->seqreg
= esp
->seqreg
;
123 p
->sreg2
= esp
->sreg2
;
125 p
->select_state
= esp
->select_state
;
126 p
->event
= esp
->event
;
129 void scsi_esp_cmd(struct esp
*esp
, u8 val
)
131 struct esp_event_ent
*p
;
132 int idx
= esp
->esp_event_cur
;
134 p
= &esp
->esp_event_log
[idx
];
135 p
->type
= ESP_EVENT_TYPE_CMD
;
137 esp_log_fill_regs(esp
, p
);
139 esp
->esp_event_cur
= (idx
+ 1) & (ESP_EVENT_LOG_SZ
- 1);
141 esp_log_command("cmd[%02x]\n", val
);
142 esp_write8(val
, ESP_CMD
);
144 EXPORT_SYMBOL(scsi_esp_cmd
);
146 static void esp_send_dma_cmd(struct esp
*esp
, int len
, int max_len
, int cmd
)
148 if (esp
->flags
& ESP_FLAG_USE_FIFO
) {
151 scsi_esp_cmd(esp
, ESP_CMD_FLUSH
);
152 for (i
= 0; i
< len
; i
++)
153 esp_write8(esp
->command_block
[i
], ESP_FDATA
);
154 scsi_esp_cmd(esp
, cmd
);
156 if (esp
->rev
== FASHME
)
157 scsi_esp_cmd(esp
, ESP_CMD_FLUSH
);
159 esp
->ops
->send_dma_cmd(esp
, esp
->command_block_dma
,
160 len
, max_len
, 0, cmd
);
164 static void esp_event(struct esp
*esp
, u8 val
)
166 struct esp_event_ent
*p
;
167 int idx
= esp
->esp_event_cur
;
169 p
= &esp
->esp_event_log
[idx
];
170 p
->type
= ESP_EVENT_TYPE_EVENT
;
172 esp_log_fill_regs(esp
, p
);
174 esp
->esp_event_cur
= (idx
+ 1) & (ESP_EVENT_LOG_SZ
- 1);
179 static void esp_dump_cmd_log(struct esp
*esp
)
181 int idx
= esp
->esp_event_cur
;
184 shost_printk(KERN_INFO
, esp
->host
, "Dumping command log\n");
186 struct esp_event_ent
*p
= &esp
->esp_event_log
[idx
];
188 shost_printk(KERN_INFO
, esp
->host
,
189 "ent[%d] %s val[%02x] sreg[%02x] seqreg[%02x] "
190 "sreg2[%02x] ireg[%02x] ss[%02x] event[%02x]\n",
192 p
->type
== ESP_EVENT_TYPE_CMD
? "CMD" : "EVENT",
193 p
->val
, p
->sreg
, p
->seqreg
,
194 p
->sreg2
, p
->ireg
, p
->select_state
, p
->event
);
196 idx
= (idx
+ 1) & (ESP_EVENT_LOG_SZ
- 1);
197 } while (idx
!= stop
);
200 static void esp_flush_fifo(struct esp
*esp
)
202 scsi_esp_cmd(esp
, ESP_CMD_FLUSH
);
203 if (esp
->rev
== ESP236
) {
206 while (esp_read8(ESP_FFLAGS
) & ESP_FF_FBYTES
) {
208 shost_printk(KERN_ALERT
, esp
->host
,
209 "ESP_FF_BYTES will not clear!\n");
217 static void hme_read_fifo(struct esp
*esp
)
219 int fcnt
= esp_read8(ESP_FFLAGS
) & ESP_FF_FBYTES
;
223 esp
->fifo
[idx
++] = esp_read8(ESP_FDATA
);
224 esp
->fifo
[idx
++] = esp_read8(ESP_FDATA
);
226 if (esp
->sreg2
& ESP_STAT2_F1BYTE
) {
227 esp_write8(0, ESP_FDATA
);
228 esp
->fifo
[idx
++] = esp_read8(ESP_FDATA
);
229 scsi_esp_cmd(esp
, ESP_CMD_FLUSH
);
234 static void esp_set_all_config3(struct esp
*esp
, u8 val
)
238 for (i
= 0; i
< ESP_MAX_TARGET
; i
++)
239 esp
->target
[i
].esp_config3
= val
;
242 /* Reset the ESP chip, _not_ the SCSI bus. */
243 static void esp_reset_esp(struct esp
*esp
)
245 u8 family_code
, version
;
247 /* Now reset the ESP chip */
248 scsi_esp_cmd(esp
, ESP_CMD_RC
);
249 scsi_esp_cmd(esp
, ESP_CMD_NULL
| ESP_CMD_DMA
);
250 if (esp
->rev
== FAST
)
251 esp_write8(ESP_CONFIG2_FENAB
, ESP_CFG2
);
252 scsi_esp_cmd(esp
, ESP_CMD_NULL
| ESP_CMD_DMA
);
254 /* This is the only point at which it is reliable to read
255 * the ID-code for a fast ESP chip variants.
257 esp
->max_period
= ((35 * esp
->ccycle
) / 1000);
258 if (esp
->rev
== FAST
) {
259 version
= esp_read8(ESP_UID
);
260 family_code
= (version
& 0xf8) >> 3;
261 if (family_code
== 0x02)
263 else if (family_code
== 0x0a)
264 esp
->rev
= FASHME
; /* Version is usually '5'. */
267 esp
->min_period
= ((4 * esp
->ccycle
) / 1000);
269 esp
->min_period
= ((5 * esp
->ccycle
) / 1000);
271 if (esp
->rev
== FAS236
) {
273 * The AM53c974 chip returns the same ID as FAS236;
274 * try to configure glitch eater.
276 u8 config4
= ESP_CONFIG4_GE1
;
277 esp_write8(config4
, ESP_CFG4
);
278 config4
= esp_read8(ESP_CFG4
);
279 if (config4
& ESP_CONFIG4_GE1
) {
281 esp_write8(esp
->config4
, ESP_CFG4
);
284 esp
->max_period
= (esp
->max_period
+ 3)>>2;
285 esp
->min_period
= (esp
->min_period
+ 3)>>2;
287 esp_write8(esp
->config1
, ESP_CFG1
);
294 esp_write8(esp
->config2
, ESP_CFG2
);
299 esp_write8(esp
->config2
, ESP_CFG2
);
300 esp
->prev_cfg3
= esp
->target
[0].esp_config3
;
301 esp_write8(esp
->prev_cfg3
, ESP_CFG3
);
305 esp
->config2
|= (ESP_CONFIG2_HME32
| ESP_CONFIG2_HMEFENAB
);
310 /* Fast 236, AM53c974 or HME */
311 esp_write8(esp
->config2
, ESP_CFG2
);
312 if (esp
->rev
== FASHME
) {
313 u8 cfg3
= esp
->target
[0].esp_config3
;
315 cfg3
|= ESP_CONFIG3_FCLOCK
| ESP_CONFIG3_OBPUSH
;
316 if (esp
->scsi_id
>= 8)
317 cfg3
|= ESP_CONFIG3_IDBIT3
;
318 esp_set_all_config3(esp
, cfg3
);
320 u32 cfg3
= esp
->target
[0].esp_config3
;
322 cfg3
|= ESP_CONFIG3_FCLK
;
323 esp_set_all_config3(esp
, cfg3
);
325 esp
->prev_cfg3
= esp
->target
[0].esp_config3
;
326 esp_write8(esp
->prev_cfg3
, ESP_CFG3
);
327 if (esp
->rev
== FASHME
) {
330 if (esp
->flags
& ESP_FLAG_DIFFERENTIAL
)
339 esp_write8(esp
->config2
, ESP_CFG2
);
340 esp_set_all_config3(esp
,
341 (esp
->target
[0].esp_config3
|
342 ESP_CONFIG3_FCLOCK
));
343 esp
->prev_cfg3
= esp
->target
[0].esp_config3
;
344 esp_write8(esp
->prev_cfg3
, ESP_CFG3
);
352 /* Reload the configuration registers */
353 esp_write8(esp
->cfact
, ESP_CFACT
);
356 esp_write8(esp
->prev_stp
, ESP_STP
);
359 esp_write8(esp
->prev_soff
, ESP_SOFF
);
361 esp_write8(esp
->neg_defp
, ESP_TIMEO
);
363 /* Eat any bitrot in the chip */
364 esp_read8(ESP_INTRPT
);
368 static void esp_map_dma(struct esp
*esp
, struct scsi_cmnd
*cmd
)
370 struct esp_cmd_priv
*spriv
= ESP_CMD_PRIV(cmd
);
371 struct scatterlist
*sg
= scsi_sglist(cmd
);
372 int dir
= cmd
->sc_data_direction
;
378 spriv
->u
.num_sg
= esp
->ops
->map_sg(esp
, sg
, scsi_sg_count(cmd
), dir
);
379 spriv
->cur_residue
= sg_dma_len(sg
);
383 for (i
= 0; i
< spriv
->u
.num_sg
; i
++)
384 total
+= sg_dma_len(&sg
[i
]);
385 spriv
->tot_residue
= total
;
388 static dma_addr_t
esp_cur_dma_addr(struct esp_cmd_entry
*ent
,
389 struct scsi_cmnd
*cmd
)
391 struct esp_cmd_priv
*p
= ESP_CMD_PRIV(cmd
);
393 if (ent
->flags
& ESP_CMD_FLAG_AUTOSENSE
) {
394 return ent
->sense_dma
+
395 (ent
->sense_ptr
- cmd
->sense_buffer
);
398 return sg_dma_address(p
->cur_sg
) +
399 (sg_dma_len(p
->cur_sg
) -
403 static unsigned int esp_cur_dma_len(struct esp_cmd_entry
*ent
,
404 struct scsi_cmnd
*cmd
)
406 struct esp_cmd_priv
*p
= ESP_CMD_PRIV(cmd
);
408 if (ent
->flags
& ESP_CMD_FLAG_AUTOSENSE
) {
409 return SCSI_SENSE_BUFFERSIZE
-
410 (ent
->sense_ptr
- cmd
->sense_buffer
);
412 return p
->cur_residue
;
415 static void esp_advance_dma(struct esp
*esp
, struct esp_cmd_entry
*ent
,
416 struct scsi_cmnd
*cmd
, unsigned int len
)
418 struct esp_cmd_priv
*p
= ESP_CMD_PRIV(cmd
);
420 if (ent
->flags
& ESP_CMD_FLAG_AUTOSENSE
) {
421 ent
->sense_ptr
+= len
;
425 p
->cur_residue
-= len
;
426 p
->tot_residue
-= len
;
427 if (p
->cur_residue
< 0 || p
->tot_residue
< 0) {
428 shost_printk(KERN_ERR
, esp
->host
,
429 "Data transfer overflow.\n");
430 shost_printk(KERN_ERR
, esp
->host
,
431 "cur_residue[%d] tot_residue[%d] len[%u]\n",
432 p
->cur_residue
, p
->tot_residue
, len
);
436 if (!p
->cur_residue
&& p
->tot_residue
) {
438 p
->cur_residue
= sg_dma_len(p
->cur_sg
);
442 static void esp_unmap_dma(struct esp
*esp
, struct scsi_cmnd
*cmd
)
444 struct esp_cmd_priv
*spriv
= ESP_CMD_PRIV(cmd
);
445 int dir
= cmd
->sc_data_direction
;
450 esp
->ops
->unmap_sg(esp
, scsi_sglist(cmd
), spriv
->u
.num_sg
, dir
);
453 static void esp_save_pointers(struct esp
*esp
, struct esp_cmd_entry
*ent
)
455 struct scsi_cmnd
*cmd
= ent
->cmd
;
456 struct esp_cmd_priv
*spriv
= ESP_CMD_PRIV(cmd
);
458 if (ent
->flags
& ESP_CMD_FLAG_AUTOSENSE
) {
459 ent
->saved_sense_ptr
= ent
->sense_ptr
;
462 ent
->saved_cur_residue
= spriv
->cur_residue
;
463 ent
->saved_cur_sg
= spriv
->cur_sg
;
464 ent
->saved_tot_residue
= spriv
->tot_residue
;
467 static void esp_restore_pointers(struct esp
*esp
, struct esp_cmd_entry
*ent
)
469 struct scsi_cmnd
*cmd
= ent
->cmd
;
470 struct esp_cmd_priv
*spriv
= ESP_CMD_PRIV(cmd
);
472 if (ent
->flags
& ESP_CMD_FLAG_AUTOSENSE
) {
473 ent
->sense_ptr
= ent
->saved_sense_ptr
;
476 spriv
->cur_residue
= ent
->saved_cur_residue
;
477 spriv
->cur_sg
= ent
->saved_cur_sg
;
478 spriv
->tot_residue
= ent
->saved_tot_residue
;
481 static void esp_check_command_len(struct esp
*esp
, struct scsi_cmnd
*cmd
)
483 if (cmd
->cmd_len
== 6 ||
484 cmd
->cmd_len
== 10 ||
485 cmd
->cmd_len
== 12) {
486 esp
->flags
&= ~ESP_FLAG_DOING_SLOWCMD
;
488 esp
->flags
|= ESP_FLAG_DOING_SLOWCMD
;
492 static void esp_write_tgt_config3(struct esp
*esp
, int tgt
)
494 if (esp
->rev
> ESP100A
) {
495 u8 val
= esp
->target
[tgt
].esp_config3
;
497 if (val
!= esp
->prev_cfg3
) {
498 esp
->prev_cfg3
= val
;
499 esp_write8(val
, ESP_CFG3
);
504 static void esp_write_tgt_sync(struct esp
*esp
, int tgt
)
506 u8 off
= esp
->target
[tgt
].esp_offset
;
507 u8 per
= esp
->target
[tgt
].esp_period
;
509 if (off
!= esp
->prev_soff
) {
510 esp
->prev_soff
= off
;
511 esp_write8(off
, ESP_SOFF
);
513 if (per
!= esp
->prev_stp
) {
515 esp_write8(per
, ESP_STP
);
519 static u32
esp_dma_length_limit(struct esp
*esp
, u32 dma_addr
, u32 dma_len
)
521 if (esp
->rev
== FASHME
) {
522 /* Arbitrary segment boundaries, 24-bit counts. */
523 if (dma_len
> (1U << 24))
524 dma_len
= (1U << 24);
528 /* ESP chip limits other variants by 16-bits of transfer
529 * count. Actually on FAS100A and FAS236 we could get
530 * 24-bits of transfer count by enabling ESP_CONFIG2_FENAB
531 * in the ESP_CFG2 register but that causes other unwanted
532 * changes so we don't use it currently.
534 if (dma_len
> (1U << 16))
535 dma_len
= (1U << 16);
537 /* All of the DMA variants hooked up to these chips
538 * cannot handle crossing a 24-bit address boundary.
540 base
= dma_addr
& ((1U << 24) - 1U);
541 end
= base
+ dma_len
;
542 if (end
> (1U << 24))
544 dma_len
= end
- base
;
549 static int esp_need_to_nego_wide(struct esp_target_data
*tp
)
551 struct scsi_target
*target
= tp
->starget
;
553 return spi_width(target
) != tp
->nego_goal_width
;
556 static int esp_need_to_nego_sync(struct esp_target_data
*tp
)
558 struct scsi_target
*target
= tp
->starget
;
560 /* When offset is zero, period is "don't care". */
561 if (!spi_offset(target
) && !tp
->nego_goal_offset
)
564 if (spi_offset(target
) == tp
->nego_goal_offset
&&
565 spi_period(target
) == tp
->nego_goal_period
)
571 static int esp_alloc_lun_tag(struct esp_cmd_entry
*ent
,
572 struct esp_lun_data
*lp
)
574 if (!ent
->orig_tag
[0]) {
575 /* Non-tagged, slot already taken? */
576 if (lp
->non_tagged_cmd
)
580 /* We are being held by active tagged
586 /* Tagged commands completed, we can unplug
587 * the queue and run this untagged command.
590 } else if (lp
->num_tagged
) {
591 /* Plug the queue until num_tagged decreases
592 * to zero in esp_free_lun_tag.
598 lp
->non_tagged_cmd
= ent
;
601 /* Tagged command, see if blocked by a
604 if (lp
->non_tagged_cmd
|| lp
->hold
)
608 BUG_ON(lp
->tagged_cmds
[ent
->orig_tag
[1]]);
610 lp
->tagged_cmds
[ent
->orig_tag
[1]] = ent
;
616 static void esp_free_lun_tag(struct esp_cmd_entry
*ent
,
617 struct esp_lun_data
*lp
)
619 if (ent
->orig_tag
[0]) {
620 BUG_ON(lp
->tagged_cmds
[ent
->orig_tag
[1]] != ent
);
621 lp
->tagged_cmds
[ent
->orig_tag
[1]] = NULL
;
624 BUG_ON(lp
->non_tagged_cmd
!= ent
);
625 lp
->non_tagged_cmd
= NULL
;
629 /* When a contingent allegiance conditon is created, we force feed a
630 * REQUEST_SENSE command to the device to fetch the sense data. I
631 * tried many other schemes, relying on the scsi error handling layer
632 * to send out the REQUEST_SENSE automatically, but this was difficult
633 * to get right especially in the presence of applications like smartd
634 * which use SG_IO to send out their own REQUEST_SENSE commands.
636 static void esp_autosense(struct esp
*esp
, struct esp_cmd_entry
*ent
)
638 struct scsi_cmnd
*cmd
= ent
->cmd
;
639 struct scsi_device
*dev
= cmd
->device
;
647 if (!ent
->sense_ptr
) {
648 esp_log_autosense("Doing auto-sense for tgt[%d] lun[%d]\n",
651 ent
->sense_ptr
= cmd
->sense_buffer
;
652 ent
->sense_dma
= esp
->ops
->map_single(esp
,
654 SCSI_SENSE_BUFFERSIZE
,
657 ent
->saved_sense_ptr
= ent
->sense_ptr
;
659 esp
->active_cmd
= ent
;
661 p
= esp
->command_block
;
662 esp
->msg_out_len
= 0;
664 *p
++ = IDENTIFY(0, lun
);
665 *p
++ = REQUEST_SENSE
;
666 *p
++ = ((dev
->scsi_level
<= SCSI_2
) ?
670 *p
++ = SCSI_SENSE_BUFFERSIZE
;
673 esp
->select_state
= ESP_SELECT_BASIC
;
676 if (esp
->rev
== FASHME
)
677 val
|= ESP_BUSID_RESELID
| ESP_BUSID_CTR32BIT
;
678 esp_write8(val
, ESP_BUSID
);
680 esp_write_tgt_sync(esp
, tgt
);
681 esp_write_tgt_config3(esp
, tgt
);
683 val
= (p
- esp
->command_block
);
685 esp_send_dma_cmd(esp
, val
, 16, ESP_CMD_SELA
);
688 static struct esp_cmd_entry
*find_and_prep_issuable_command(struct esp
*esp
)
690 struct esp_cmd_entry
*ent
;
692 list_for_each_entry(ent
, &esp
->queued_cmds
, list
) {
693 struct scsi_cmnd
*cmd
= ent
->cmd
;
694 struct scsi_device
*dev
= cmd
->device
;
695 struct esp_lun_data
*lp
= dev
->hostdata
;
697 if (ent
->flags
& ESP_CMD_FLAG_AUTOSENSE
) {
703 if (!spi_populate_tag_msg(&ent
->tag
[0], cmd
)) {
707 ent
->orig_tag
[0] = ent
->tag
[0];
708 ent
->orig_tag
[1] = ent
->tag
[1];
710 if (esp_alloc_lun_tag(ent
, lp
) < 0)
719 static void esp_maybe_execute_command(struct esp
*esp
)
721 struct esp_target_data
*tp
;
722 struct esp_lun_data
*lp
;
723 struct scsi_device
*dev
;
724 struct scsi_cmnd
*cmd
;
725 struct esp_cmd_entry
*ent
;
730 if (esp
->active_cmd
||
731 (esp
->flags
& ESP_FLAG_RESETTING
))
734 ent
= find_and_prep_issuable_command(esp
);
738 if (ent
->flags
& ESP_CMD_FLAG_AUTOSENSE
) {
739 esp_autosense(esp
, ent
);
747 tp
= &esp
->target
[tgt
];
750 list_move(&ent
->list
, &esp
->active_cmds
);
752 esp
->active_cmd
= ent
;
754 esp_map_dma(esp
, cmd
);
755 esp_save_pointers(esp
, ent
);
757 esp_check_command_len(esp
, cmd
);
759 p
= esp
->command_block
;
761 esp
->msg_out_len
= 0;
762 if (tp
->flags
& ESP_TGT_CHECK_NEGO
) {
763 /* Need to negotiate. If the target is broken
764 * go for synchronous transfers and non-wide.
766 if (tp
->flags
& ESP_TGT_BROKEN
) {
767 tp
->flags
&= ~ESP_TGT_DISCONNECT
;
768 tp
->nego_goal_period
= 0;
769 tp
->nego_goal_offset
= 0;
770 tp
->nego_goal_width
= 0;
771 tp
->nego_goal_tags
= 0;
774 /* If the settings are not changing, skip this. */
775 if (spi_width(tp
->starget
) == tp
->nego_goal_width
&&
776 spi_period(tp
->starget
) == tp
->nego_goal_period
&&
777 spi_offset(tp
->starget
) == tp
->nego_goal_offset
) {
778 tp
->flags
&= ~ESP_TGT_CHECK_NEGO
;
782 if (esp
->rev
== FASHME
&& esp_need_to_nego_wide(tp
)) {
784 spi_populate_width_msg(&esp
->msg_out
[0],
785 (tp
->nego_goal_width
?
787 tp
->flags
|= ESP_TGT_NEGO_WIDE
;
788 } else if (esp_need_to_nego_sync(tp
)) {
790 spi_populate_sync_msg(&esp
->msg_out
[0],
791 tp
->nego_goal_period
,
792 tp
->nego_goal_offset
);
793 tp
->flags
|= ESP_TGT_NEGO_SYNC
;
795 tp
->flags
&= ~ESP_TGT_CHECK_NEGO
;
798 /* Process it like a slow command. */
799 if (tp
->flags
& (ESP_TGT_NEGO_WIDE
| ESP_TGT_NEGO_SYNC
))
800 esp
->flags
|= ESP_FLAG_DOING_SLOWCMD
;
804 /* If we don't have a lun-data struct yet, we're probing
805 * so do not disconnect. Also, do not disconnect unless
806 * we have a tag on this command.
808 if (lp
&& (tp
->flags
& ESP_TGT_DISCONNECT
) && ent
->tag
[0])
809 *p
++ = IDENTIFY(1, lun
);
811 *p
++ = IDENTIFY(0, lun
);
813 if (ent
->tag
[0] && esp
->rev
== ESP100
) {
814 /* ESP100 lacks select w/atn3 command, use select
817 esp
->flags
|= ESP_FLAG_DOING_SLOWCMD
;
820 if (!(esp
->flags
& ESP_FLAG_DOING_SLOWCMD
)) {
821 start_cmd
= ESP_CMD_SELA
;
826 start_cmd
= ESP_CMD_SA3
;
829 for (i
= 0; i
< cmd
->cmd_len
; i
++)
832 esp
->select_state
= ESP_SELECT_BASIC
;
834 esp
->cmd_bytes_left
= cmd
->cmd_len
;
835 esp
->cmd_bytes_ptr
= &cmd
->cmnd
[0];
838 for (i
= esp
->msg_out_len
- 1;
840 esp
->msg_out
[i
+ 2] = esp
->msg_out
[i
];
841 esp
->msg_out
[0] = ent
->tag
[0];
842 esp
->msg_out
[1] = ent
->tag
[1];
843 esp
->msg_out_len
+= 2;
846 start_cmd
= ESP_CMD_SELAS
;
847 esp
->select_state
= ESP_SELECT_MSGOUT
;
850 if (esp
->rev
== FASHME
)
851 val
|= ESP_BUSID_RESELID
| ESP_BUSID_CTR32BIT
;
852 esp_write8(val
, ESP_BUSID
);
854 esp_write_tgt_sync(esp
, tgt
);
855 esp_write_tgt_config3(esp
, tgt
);
857 val
= (p
- esp
->command_block
);
859 if (esp_debug
& ESP_DEBUG_SCSICMD
) {
860 printk("ESP: tgt[%d] lun[%d] scsi_cmd [ ", tgt
, lun
);
861 for (i
= 0; i
< cmd
->cmd_len
; i
++)
862 printk("%02x ", cmd
->cmnd
[i
]);
866 esp_send_dma_cmd(esp
, val
, 16, start_cmd
);
869 static struct esp_cmd_entry
*esp_get_ent(struct esp
*esp
)
871 struct list_head
*head
= &esp
->esp_cmd_pool
;
872 struct esp_cmd_entry
*ret
;
874 if (list_empty(head
)) {
875 ret
= kzalloc(sizeof(struct esp_cmd_entry
), GFP_ATOMIC
);
877 ret
= list_entry(head
->next
, struct esp_cmd_entry
, list
);
878 list_del(&ret
->list
);
879 memset(ret
, 0, sizeof(*ret
));
884 static void esp_put_ent(struct esp
*esp
, struct esp_cmd_entry
*ent
)
886 list_add(&ent
->list
, &esp
->esp_cmd_pool
);
889 static void esp_cmd_is_done(struct esp
*esp
, struct esp_cmd_entry
*ent
,
890 struct scsi_cmnd
*cmd
, unsigned int result
)
892 struct scsi_device
*dev
= cmd
->device
;
896 esp
->active_cmd
= NULL
;
897 esp_unmap_dma(esp
, cmd
);
898 esp_free_lun_tag(ent
, dev
->hostdata
);
899 cmd
->result
= result
;
902 complete(ent
->eh_done
);
906 if (ent
->flags
& ESP_CMD_FLAG_AUTOSENSE
) {
907 esp
->ops
->unmap_single(esp
, ent
->sense_dma
,
908 SCSI_SENSE_BUFFERSIZE
, DMA_FROM_DEVICE
);
909 ent
->sense_ptr
= NULL
;
911 /* Restore the message/status bytes to what we actually
912 * saw originally. Also, report that we are providing
915 cmd
->result
= ((DRIVER_SENSE
<< 24) |
917 (COMMAND_COMPLETE
<< 8) |
918 (SAM_STAT_CHECK_CONDITION
<< 0));
920 ent
->flags
&= ~ESP_CMD_FLAG_AUTOSENSE
;
921 if (esp_debug
& ESP_DEBUG_AUTOSENSE
) {
924 printk("esp%d: tgt[%d] lun[%d] AUTO SENSE[ ",
925 esp
->host
->unique_id
, tgt
, lun
);
926 for (i
= 0; i
< 18; i
++)
927 printk("%02x ", cmd
->sense_buffer
[i
]);
934 list_del(&ent
->list
);
935 esp_put_ent(esp
, ent
);
937 esp_maybe_execute_command(esp
);
940 static unsigned int compose_result(unsigned int status
, unsigned int message
,
941 unsigned int driver_code
)
943 return (status
| (message
<< 8) | (driver_code
<< 16));
946 static void esp_event_queue_full(struct esp
*esp
, struct esp_cmd_entry
*ent
)
948 struct scsi_device
*dev
= ent
->cmd
->device
;
949 struct esp_lun_data
*lp
= dev
->hostdata
;
951 scsi_track_queue_full(dev
, lp
->num_tagged
- 1);
954 static int esp_queuecommand_lck(struct scsi_cmnd
*cmd
, void (*done
)(struct scsi_cmnd
*))
956 struct scsi_device
*dev
= cmd
->device
;
957 struct esp
*esp
= shost_priv(dev
->host
);
958 struct esp_cmd_priv
*spriv
;
959 struct esp_cmd_entry
*ent
;
961 ent
= esp_get_ent(esp
);
963 return SCSI_MLQUEUE_HOST_BUSY
;
967 cmd
->scsi_done
= done
;
969 spriv
= ESP_CMD_PRIV(cmd
);
970 spriv
->u
.dma_addr
= ~(dma_addr_t
)0x0;
972 list_add_tail(&ent
->list
, &esp
->queued_cmds
);
974 esp_maybe_execute_command(esp
);
979 static DEF_SCSI_QCMD(esp_queuecommand
)
981 static int esp_check_gross_error(struct esp
*esp
)
983 if (esp
->sreg
& ESP_STAT_SPAM
) {
984 /* Gross Error, could be one of:
985 * - top of fifo overwritten
986 * - top of command register overwritten
987 * - DMA programmed with wrong direction
988 * - improper phase change
990 shost_printk(KERN_ERR
, esp
->host
,
991 "Gross error sreg[%02x]\n", esp
->sreg
);
992 /* XXX Reset the chip. XXX */
998 static int esp_check_spur_intr(struct esp
*esp
)
1003 /* The interrupt pending bit of the status register cannot
1004 * be trusted on these revisions.
1006 esp
->sreg
&= ~ESP_STAT_INTR
;
1010 if (!(esp
->sreg
& ESP_STAT_INTR
)) {
1011 if (esp
->ireg
& ESP_INTR_SR
)
1014 /* If the DMA is indicating interrupt pending and the
1015 * ESP is not, the only possibility is a DMA error.
1017 if (!esp
->ops
->dma_error(esp
)) {
1018 shost_printk(KERN_ERR
, esp
->host
,
1019 "Spurious irq, sreg=%02x.\n",
1024 shost_printk(KERN_ERR
, esp
->host
, "DMA error\n");
1026 /* XXX Reset the chip. XXX */
1035 static void esp_schedule_reset(struct esp
*esp
)
1037 esp_log_reset("esp_schedule_reset() from %pf\n",
1038 __builtin_return_address(0));
1039 esp
->flags
|= ESP_FLAG_RESETTING
;
1040 esp_event(esp
, ESP_EVENT_RESET
);
1043 /* In order to avoid having to add a special half-reconnected state
1044 * into the driver we just sit here and poll through the rest of
1045 * the reselection process to get the tag message bytes.
1047 static struct esp_cmd_entry
*esp_reconnect_with_tag(struct esp
*esp
,
1048 struct esp_lun_data
*lp
)
1050 struct esp_cmd_entry
*ent
;
1053 if (!lp
->num_tagged
) {
1054 shost_printk(KERN_ERR
, esp
->host
,
1055 "Reconnect w/num_tagged==0\n");
1059 esp_log_reconnect("reconnect tag, ");
1061 for (i
= 0; i
< ESP_QUICKIRQ_LIMIT
; i
++) {
1062 if (esp
->ops
->irq_pending(esp
))
1065 if (i
== ESP_QUICKIRQ_LIMIT
) {
1066 shost_printk(KERN_ERR
, esp
->host
,
1067 "Reconnect IRQ1 timeout\n");
1071 esp
->sreg
= esp_read8(ESP_STATUS
);
1072 esp
->ireg
= esp_read8(ESP_INTRPT
);
1074 esp_log_reconnect("IRQ(%d:%x:%x), ",
1075 i
, esp
->ireg
, esp
->sreg
);
1077 if (esp
->ireg
& ESP_INTR_DC
) {
1078 shost_printk(KERN_ERR
, esp
->host
,
1079 "Reconnect, got disconnect.\n");
1083 if ((esp
->sreg
& ESP_STAT_PMASK
) != ESP_MIP
) {
1084 shost_printk(KERN_ERR
, esp
->host
,
1085 "Reconnect, not MIP sreg[%02x].\n", esp
->sreg
);
1089 /* DMA in the tag bytes... */
1090 esp
->command_block
[0] = 0xff;
1091 esp
->command_block
[1] = 0xff;
1092 esp
->ops
->send_dma_cmd(esp
, esp
->command_block_dma
,
1093 2, 2, 1, ESP_CMD_DMA
| ESP_CMD_TI
);
1095 /* ACK the message. */
1096 scsi_esp_cmd(esp
, ESP_CMD_MOK
);
1098 for (i
= 0; i
< ESP_RESELECT_TAG_LIMIT
; i
++) {
1099 if (esp
->ops
->irq_pending(esp
)) {
1100 esp
->sreg
= esp_read8(ESP_STATUS
);
1101 esp
->ireg
= esp_read8(ESP_INTRPT
);
1102 if (esp
->ireg
& ESP_INTR_FDONE
)
1107 if (i
== ESP_RESELECT_TAG_LIMIT
) {
1108 shost_printk(KERN_ERR
, esp
->host
, "Reconnect IRQ2 timeout\n");
1111 esp
->ops
->dma_drain(esp
);
1112 esp
->ops
->dma_invalidate(esp
);
1114 esp_log_reconnect("IRQ2(%d:%x:%x) tag[%x:%x]\n",
1115 i
, esp
->ireg
, esp
->sreg
,
1116 esp
->command_block
[0],
1117 esp
->command_block
[1]);
1119 if (esp
->command_block
[0] < SIMPLE_QUEUE_TAG
||
1120 esp
->command_block
[0] > ORDERED_QUEUE_TAG
) {
1121 shost_printk(KERN_ERR
, esp
->host
,
1122 "Reconnect, bad tag type %02x.\n",
1123 esp
->command_block
[0]);
1127 ent
= lp
->tagged_cmds
[esp
->command_block
[1]];
1129 shost_printk(KERN_ERR
, esp
->host
,
1130 "Reconnect, no entry for tag %02x.\n",
1131 esp
->command_block
[1]);
1138 static int esp_reconnect(struct esp
*esp
)
1140 struct esp_cmd_entry
*ent
;
1141 struct esp_target_data
*tp
;
1142 struct esp_lun_data
*lp
;
1143 struct scsi_device
*dev
;
1146 BUG_ON(esp
->active_cmd
);
1147 if (esp
->rev
== FASHME
) {
1148 /* FASHME puts the target and lun numbers directly
1151 target
= esp
->fifo
[0];
1152 lun
= esp
->fifo
[1] & 0x7;
1154 u8 bits
= esp_read8(ESP_FDATA
);
1156 /* Older chips put the lun directly into the fifo, but
1157 * the target is given as a sample of the arbitration
1158 * lines on the bus at reselection time. So we should
1159 * see the ID of the ESP and the one reconnecting target
1160 * set in the bitmap.
1162 if (!(bits
& esp
->scsi_id_mask
))
1164 bits
&= ~esp
->scsi_id_mask
;
1165 if (!bits
|| (bits
& (bits
- 1)))
1168 target
= ffs(bits
) - 1;
1169 lun
= (esp_read8(ESP_FDATA
) & 0x7);
1171 scsi_esp_cmd(esp
, ESP_CMD_FLUSH
);
1172 if (esp
->rev
== ESP100
) {
1173 u8 ireg
= esp_read8(ESP_INTRPT
);
1174 /* This chip has a bug during reselection that can
1175 * cause a spurious illegal-command interrupt, which
1176 * we simply ACK here. Another possibility is a bus
1177 * reset so we must check for that.
1179 if (ireg
& ESP_INTR_SR
)
1182 scsi_esp_cmd(esp
, ESP_CMD_NULL
);
1185 esp_write_tgt_sync(esp
, target
);
1186 esp_write_tgt_config3(esp
, target
);
1188 scsi_esp_cmd(esp
, ESP_CMD_MOK
);
1190 if (esp
->rev
== FASHME
)
1191 esp_write8(target
| ESP_BUSID_RESELID
| ESP_BUSID_CTR32BIT
,
1194 tp
= &esp
->target
[target
];
1195 dev
= __scsi_device_lookup_by_target(tp
->starget
, lun
);
1197 shost_printk(KERN_ERR
, esp
->host
,
1198 "Reconnect, no lp tgt[%u] lun[%u]\n",
1204 ent
= lp
->non_tagged_cmd
;
1206 ent
= esp_reconnect_with_tag(esp
, lp
);
1211 esp
->active_cmd
= ent
;
1213 if (ent
->flags
& ESP_CMD_FLAG_ABORT
) {
1214 esp
->msg_out
[0] = ABORT_TASK_SET
;
1215 esp
->msg_out_len
= 1;
1216 scsi_esp_cmd(esp
, ESP_CMD_SATN
);
1219 esp_event(esp
, ESP_EVENT_CHECK_PHASE
);
1220 esp_restore_pointers(esp
, ent
);
1221 esp
->flags
|= ESP_FLAG_QUICKIRQ_CHECK
;
1225 esp_schedule_reset(esp
);
1229 static int esp_finish_select(struct esp
*esp
)
1231 struct esp_cmd_entry
*ent
;
1232 struct scsi_cmnd
*cmd
;
1233 u8 orig_select_state
;
1235 orig_select_state
= esp
->select_state
;
1237 /* No longer selecting. */
1238 esp
->select_state
= ESP_SELECT_NONE
;
1240 esp
->seqreg
= esp_read8(ESP_SSTEP
) & ESP_STEP_VBITS
;
1241 ent
= esp
->active_cmd
;
1244 if (esp
->ops
->dma_error(esp
)) {
1245 /* If we see a DMA error during or as a result of selection,
1248 esp_schedule_reset(esp
);
1249 esp_cmd_is_done(esp
, ent
, cmd
, (DID_ERROR
<< 16));
1253 esp
->ops
->dma_invalidate(esp
);
1255 if (esp
->ireg
== (ESP_INTR_RSEL
| ESP_INTR_FDONE
)) {
1256 struct esp_target_data
*tp
= &esp
->target
[cmd
->device
->id
];
1258 /* Carefully back out of the selection attempt. Release
1259 * resources (such as DMA mapping & TAG) and reset state (such
1260 * as message out and command delivery variables).
1262 if (!(ent
->flags
& ESP_CMD_FLAG_AUTOSENSE
)) {
1263 esp_unmap_dma(esp
, cmd
);
1264 esp_free_lun_tag(ent
, cmd
->device
->hostdata
);
1265 tp
->flags
&= ~(ESP_TGT_NEGO_SYNC
| ESP_TGT_NEGO_WIDE
);
1266 esp
->flags
&= ~ESP_FLAG_DOING_SLOWCMD
;
1267 esp
->cmd_bytes_ptr
= NULL
;
1268 esp
->cmd_bytes_left
= 0;
1270 esp
->ops
->unmap_single(esp
, ent
->sense_dma
,
1271 SCSI_SENSE_BUFFERSIZE
,
1273 ent
->sense_ptr
= NULL
;
1276 /* Now that the state is unwound properly, put back onto
1277 * the issue queue. This command is no longer active.
1279 list_move(&ent
->list
, &esp
->queued_cmds
);
1280 esp
->active_cmd
= NULL
;
1282 /* Return value ignored by caller, it directly invokes
1288 if (esp
->ireg
== ESP_INTR_DC
) {
1289 struct scsi_device
*dev
= cmd
->device
;
1291 /* Disconnect. Make sure we re-negotiate sync and
1292 * wide parameters if this target starts responding
1293 * again in the future.
1295 esp
->target
[dev
->id
].flags
|= ESP_TGT_CHECK_NEGO
;
1297 scsi_esp_cmd(esp
, ESP_CMD_ESEL
);
1298 esp_cmd_is_done(esp
, ent
, cmd
, (DID_BAD_TARGET
<< 16));
1302 if (esp
->ireg
== (ESP_INTR_FDONE
| ESP_INTR_BSERV
)) {
1303 /* Selection successful. On pre-FAST chips we have
1304 * to do a NOP and possibly clean out the FIFO.
1306 if (esp
->rev
<= ESP236
) {
1307 int fcnt
= esp_read8(ESP_FFLAGS
) & ESP_FF_FBYTES
;
1309 scsi_esp_cmd(esp
, ESP_CMD_NULL
);
1313 ((esp
->sreg
& ESP_STAT_PMASK
) != ESP_DIP
)))
1314 esp_flush_fifo(esp
);
1317 /* If we are doing a slow command, negotiation, etc.
1318 * we'll do the right thing as we transition to the
1321 esp_event(esp
, ESP_EVENT_CHECK_PHASE
);
1325 shost_printk(KERN_INFO
, esp
->host
,
1326 "Unexpected selection completion ireg[%x]\n", esp
->ireg
);
1327 esp_schedule_reset(esp
);
1331 static int esp_data_bytes_sent(struct esp
*esp
, struct esp_cmd_entry
*ent
,
1332 struct scsi_cmnd
*cmd
)
1334 int fifo_cnt
, ecount
, bytes_sent
, flush_fifo
;
1336 fifo_cnt
= esp_read8(ESP_FFLAGS
) & ESP_FF_FBYTES
;
1337 if (esp
->prev_cfg3
& ESP_CONFIG3_EWIDE
)
1341 if (!(esp
->sreg
& ESP_STAT_TCNT
)) {
1342 ecount
= ((unsigned int)esp_read8(ESP_TCLOW
) |
1343 (((unsigned int)esp_read8(ESP_TCMED
)) << 8));
1344 if (esp
->rev
== FASHME
)
1345 ecount
|= ((unsigned int)esp_read8(FAS_RLO
)) << 16;
1346 if (esp
->rev
== PCSCSI
&& (esp
->config2
& ESP_CONFIG2_FENAB
))
1347 ecount
|= ((unsigned int)esp_read8(ESP_TCHI
)) << 16;
1350 bytes_sent
= esp
->data_dma_len
;
1351 bytes_sent
-= ecount
;
1354 * The am53c974 has a DMA 'pecularity'. The doc states:
1355 * In some odd byte conditions, one residual byte will
1356 * be left in the SCSI FIFO, and the FIFO Flags will
1357 * never count to '0 '. When this happens, the residual
1358 * byte should be retrieved via PIO following completion
1359 * of the BLAST operation.
1361 if (fifo_cnt
== 1 && ent
->flags
& ESP_CMD_FLAG_RESIDUAL
) {
1363 size_t offset
= bytes_sent
;
1364 u8 bval
= esp_read8(ESP_FDATA
);
1366 if (ent
->flags
& ESP_CMD_FLAG_AUTOSENSE
)
1367 ent
->sense_ptr
[bytes_sent
] = bval
;
1369 struct esp_cmd_priv
*p
= ESP_CMD_PRIV(cmd
);
1372 ptr
= scsi_kmap_atomic_sg(p
->cur_sg
, p
->u
.num_sg
,
1375 *(ptr
+ offset
) = bval
;
1376 scsi_kunmap_atomic_sg(ptr
);
1379 bytes_sent
+= fifo_cnt
;
1380 ent
->flags
&= ~ESP_CMD_FLAG_RESIDUAL
;
1382 if (!(ent
->flags
& ESP_CMD_FLAG_WRITE
))
1383 bytes_sent
-= fifo_cnt
;
1386 if (!esp
->prev_soff
) {
1387 /* Synchronous data transfer, always flush fifo. */
1390 if (esp
->rev
== ESP100
) {
1393 /* ESP100 has a chip bug where in the synchronous data
1394 * phase it can mistake a final long REQ pulse from the
1395 * target as an extra data byte. Fun.
1397 * To detect this case we resample the status register
1398 * and fifo flags. If we're still in a data phase and
1399 * we see spurious chunks in the fifo, we return error
1400 * to the caller which should reset and set things up
1401 * such that we only try future transfers to this
1402 * target in synchronous mode.
1404 esp
->sreg
= esp_read8(ESP_STATUS
);
1405 phase
= esp
->sreg
& ESP_STAT_PMASK
;
1406 fflags
= esp_read8(ESP_FFLAGS
);
1408 if ((phase
== ESP_DOP
&&
1409 (fflags
& ESP_FF_ONOTZERO
)) ||
1410 (phase
== ESP_DIP
&&
1411 (fflags
& ESP_FF_FBYTES
)))
1414 if (!(ent
->flags
& ESP_CMD_FLAG_WRITE
))
1419 esp_flush_fifo(esp
);
1424 static void esp_setsync(struct esp
*esp
, struct esp_target_data
*tp
,
1425 u8 scsi_period
, u8 scsi_offset
,
1426 u8 esp_stp
, u8 esp_soff
)
1428 spi_period(tp
->starget
) = scsi_period
;
1429 spi_offset(tp
->starget
) = scsi_offset
;
1430 spi_width(tp
->starget
) = (tp
->flags
& ESP_TGT_WIDE
) ? 1 : 0;
1434 esp_soff
|= esp
->radelay
;
1435 if (esp
->rev
>= FAS236
) {
1436 u8 bit
= ESP_CONFIG3_FSCSI
;
1437 if (esp
->rev
>= FAS100A
)
1438 bit
= ESP_CONFIG3_FAST
;
1440 if (scsi_period
< 50) {
1441 if (esp
->rev
== FASHME
)
1442 esp_soff
&= ~esp
->radelay
;
1443 tp
->esp_config3
|= bit
;
1445 tp
->esp_config3
&= ~bit
;
1447 esp
->prev_cfg3
= tp
->esp_config3
;
1448 esp_write8(esp
->prev_cfg3
, ESP_CFG3
);
1452 tp
->esp_period
= esp
->prev_stp
= esp_stp
;
1453 tp
->esp_offset
= esp
->prev_soff
= esp_soff
;
1455 esp_write8(esp_soff
, ESP_SOFF
);
1456 esp_write8(esp_stp
, ESP_STP
);
1458 tp
->flags
&= ~(ESP_TGT_NEGO_SYNC
| ESP_TGT_CHECK_NEGO
);
1460 spi_display_xfer_agreement(tp
->starget
);
1463 static void esp_msgin_reject(struct esp
*esp
)
1465 struct esp_cmd_entry
*ent
= esp
->active_cmd
;
1466 struct scsi_cmnd
*cmd
= ent
->cmd
;
1467 struct esp_target_data
*tp
;
1470 tgt
= cmd
->device
->id
;
1471 tp
= &esp
->target
[tgt
];
1473 if (tp
->flags
& ESP_TGT_NEGO_WIDE
) {
1474 tp
->flags
&= ~(ESP_TGT_NEGO_WIDE
| ESP_TGT_WIDE
);
1476 if (!esp_need_to_nego_sync(tp
)) {
1477 tp
->flags
&= ~ESP_TGT_CHECK_NEGO
;
1478 scsi_esp_cmd(esp
, ESP_CMD_RATN
);
1481 spi_populate_sync_msg(&esp
->msg_out
[0],
1482 tp
->nego_goal_period
,
1483 tp
->nego_goal_offset
);
1484 tp
->flags
|= ESP_TGT_NEGO_SYNC
;
1485 scsi_esp_cmd(esp
, ESP_CMD_SATN
);
1490 if (tp
->flags
& ESP_TGT_NEGO_SYNC
) {
1491 tp
->flags
&= ~(ESP_TGT_NEGO_SYNC
| ESP_TGT_CHECK_NEGO
);
1494 esp_setsync(esp
, tp
, 0, 0, 0, 0);
1495 scsi_esp_cmd(esp
, ESP_CMD_RATN
);
1499 esp
->msg_out
[0] = ABORT_TASK_SET
;
1500 esp
->msg_out_len
= 1;
1501 scsi_esp_cmd(esp
, ESP_CMD_SATN
);
1504 static void esp_msgin_sdtr(struct esp
*esp
, struct esp_target_data
*tp
)
1506 u8 period
= esp
->msg_in
[3];
1507 u8 offset
= esp
->msg_in
[4];
1510 if (!(tp
->flags
& ESP_TGT_NEGO_SYNC
))
1519 if (period
> esp
->max_period
) {
1520 period
= offset
= 0;
1523 if (period
< esp
->min_period
)
1526 one_clock
= esp
->ccycle
/ 1000;
1527 stp
= DIV_ROUND_UP(period
<< 2, one_clock
);
1528 if (stp
&& esp
->rev
>= FAS236
) {
1536 esp_setsync(esp
, tp
, period
, offset
, stp
, offset
);
1540 esp
->msg_out
[0] = MESSAGE_REJECT
;
1541 esp
->msg_out_len
= 1;
1542 scsi_esp_cmd(esp
, ESP_CMD_SATN
);
1546 tp
->nego_goal_period
= period
;
1547 tp
->nego_goal_offset
= offset
;
1549 spi_populate_sync_msg(&esp
->msg_out
[0],
1550 tp
->nego_goal_period
,
1551 tp
->nego_goal_offset
);
1552 scsi_esp_cmd(esp
, ESP_CMD_SATN
);
1555 static void esp_msgin_wdtr(struct esp
*esp
, struct esp_target_data
*tp
)
1557 int size
= 8 << esp
->msg_in
[3];
1560 if (esp
->rev
!= FASHME
)
1563 if (size
!= 8 && size
!= 16)
1566 if (!(tp
->flags
& ESP_TGT_NEGO_WIDE
))
1569 cfg3
= tp
->esp_config3
;
1571 tp
->flags
|= ESP_TGT_WIDE
;
1572 cfg3
|= ESP_CONFIG3_EWIDE
;
1574 tp
->flags
&= ~ESP_TGT_WIDE
;
1575 cfg3
&= ~ESP_CONFIG3_EWIDE
;
1577 tp
->esp_config3
= cfg3
;
1578 esp
->prev_cfg3
= cfg3
;
1579 esp_write8(cfg3
, ESP_CFG3
);
1581 tp
->flags
&= ~ESP_TGT_NEGO_WIDE
;
1583 spi_period(tp
->starget
) = 0;
1584 spi_offset(tp
->starget
) = 0;
1585 if (!esp_need_to_nego_sync(tp
)) {
1586 tp
->flags
&= ~ESP_TGT_CHECK_NEGO
;
1587 scsi_esp_cmd(esp
, ESP_CMD_RATN
);
1590 spi_populate_sync_msg(&esp
->msg_out
[0],
1591 tp
->nego_goal_period
,
1592 tp
->nego_goal_offset
);
1593 tp
->flags
|= ESP_TGT_NEGO_SYNC
;
1594 scsi_esp_cmd(esp
, ESP_CMD_SATN
);
1599 esp
->msg_out
[0] = MESSAGE_REJECT
;
1600 esp
->msg_out_len
= 1;
1601 scsi_esp_cmd(esp
, ESP_CMD_SATN
);
1604 static void esp_msgin_extended(struct esp
*esp
)
1606 struct esp_cmd_entry
*ent
= esp
->active_cmd
;
1607 struct scsi_cmnd
*cmd
= ent
->cmd
;
1608 struct esp_target_data
*tp
;
1609 int tgt
= cmd
->device
->id
;
1611 tp
= &esp
->target
[tgt
];
1612 if (esp
->msg_in
[2] == EXTENDED_SDTR
) {
1613 esp_msgin_sdtr(esp
, tp
);
1616 if (esp
->msg_in
[2] == EXTENDED_WDTR
) {
1617 esp_msgin_wdtr(esp
, tp
);
1621 shost_printk(KERN_INFO
, esp
->host
,
1622 "Unexpected extended msg type %x\n", esp
->msg_in
[2]);
1624 esp
->msg_out
[0] = ABORT_TASK_SET
;
1625 esp
->msg_out_len
= 1;
1626 scsi_esp_cmd(esp
, ESP_CMD_SATN
);
1629 /* Analyze msgin bytes received from target so far. Return non-zero
1630 * if there are more bytes needed to complete the message.
1632 static int esp_msgin_process(struct esp
*esp
)
1634 u8 msg0
= esp
->msg_in
[0];
1635 int len
= esp
->msg_in_len
;
1639 shost_printk(KERN_INFO
, esp
->host
,
1640 "Unexpected msgin identify\n");
1645 case EXTENDED_MESSAGE
:
1648 if (len
< esp
->msg_in
[1] + 2)
1650 esp_msgin_extended(esp
);
1653 case IGNORE_WIDE_RESIDUE
: {
1654 struct esp_cmd_entry
*ent
;
1655 struct esp_cmd_priv
*spriv
;
1659 if (esp
->msg_in
[1] != 1)
1662 ent
= esp
->active_cmd
;
1663 spriv
= ESP_CMD_PRIV(ent
->cmd
);
1665 if (spriv
->cur_residue
== sg_dma_len(spriv
->cur_sg
)) {
1667 spriv
->cur_residue
= 1;
1669 spriv
->cur_residue
++;
1670 spriv
->tot_residue
++;
1675 case RESTORE_POINTERS
:
1676 esp_restore_pointers(esp
, esp
->active_cmd
);
1679 esp_save_pointers(esp
, esp
->active_cmd
);
1682 case COMMAND_COMPLETE
:
1684 struct esp_cmd_entry
*ent
= esp
->active_cmd
;
1686 ent
->message
= msg0
;
1687 esp_event(esp
, ESP_EVENT_FREE_BUS
);
1688 esp
->flags
|= ESP_FLAG_QUICKIRQ_CHECK
;
1691 case MESSAGE_REJECT
:
1692 esp_msgin_reject(esp
);
1697 esp
->msg_out
[0] = MESSAGE_REJECT
;
1698 esp
->msg_out_len
= 1;
1699 scsi_esp_cmd(esp
, ESP_CMD_SATN
);
1704 static int esp_process_event(struct esp
*esp
)
1710 esp_log_event("process event %d phase %x\n",
1711 esp
->event
, esp
->sreg
& ESP_STAT_PMASK
);
1712 switch (esp
->event
) {
1713 case ESP_EVENT_CHECK_PHASE
:
1714 switch (esp
->sreg
& ESP_STAT_PMASK
) {
1716 esp_event(esp
, ESP_EVENT_DATA_OUT
);
1719 esp_event(esp
, ESP_EVENT_DATA_IN
);
1722 esp_flush_fifo(esp
);
1723 scsi_esp_cmd(esp
, ESP_CMD_ICCSEQ
);
1724 esp_event(esp
, ESP_EVENT_STATUS
);
1725 esp
->flags
|= ESP_FLAG_QUICKIRQ_CHECK
;
1729 esp_event(esp
, ESP_EVENT_MSGOUT
);
1733 esp_event(esp
, ESP_EVENT_MSGIN
);
1737 esp_event(esp
, ESP_EVENT_CMD_START
);
1741 shost_printk(KERN_INFO
, esp
->host
,
1742 "Unexpected phase, sreg=%02x\n",
1744 esp_schedule_reset(esp
);
1750 case ESP_EVENT_DATA_IN
:
1754 case ESP_EVENT_DATA_OUT
: {
1755 struct esp_cmd_entry
*ent
= esp
->active_cmd
;
1756 struct scsi_cmnd
*cmd
= ent
->cmd
;
1757 dma_addr_t dma_addr
= esp_cur_dma_addr(ent
, cmd
);
1758 unsigned int dma_len
= esp_cur_dma_len(ent
, cmd
);
1760 if (esp
->rev
== ESP100
)
1761 scsi_esp_cmd(esp
, ESP_CMD_NULL
);
1764 ent
->flags
|= ESP_CMD_FLAG_WRITE
;
1766 ent
->flags
&= ~ESP_CMD_FLAG_WRITE
;
1768 if (esp
->ops
->dma_length_limit
)
1769 dma_len
= esp
->ops
->dma_length_limit(esp
, dma_addr
,
1772 dma_len
= esp_dma_length_limit(esp
, dma_addr
, dma_len
);
1774 esp
->data_dma_len
= dma_len
;
1777 shost_printk(KERN_ERR
, esp
->host
,
1778 "DMA length is zero!\n");
1779 shost_printk(KERN_ERR
, esp
->host
,
1780 "cur adr[%08llx] len[%08x]\n",
1781 (unsigned long long)esp_cur_dma_addr(ent
, cmd
),
1782 esp_cur_dma_len(ent
, cmd
));
1783 esp_schedule_reset(esp
);
1787 esp_log_datastart("start data addr[%08llx] len[%u] write(%d)\n",
1788 (unsigned long long)dma_addr
, dma_len
, write
);
1790 esp
->ops
->send_dma_cmd(esp
, dma_addr
, dma_len
, dma_len
,
1791 write
, ESP_CMD_DMA
| ESP_CMD_TI
);
1792 esp_event(esp
, ESP_EVENT_DATA_DONE
);
1795 case ESP_EVENT_DATA_DONE
: {
1796 struct esp_cmd_entry
*ent
= esp
->active_cmd
;
1797 struct scsi_cmnd
*cmd
= ent
->cmd
;
1800 if (esp
->ops
->dma_error(esp
)) {
1801 shost_printk(KERN_INFO
, esp
->host
,
1802 "data done, DMA error, resetting\n");
1803 esp_schedule_reset(esp
);
1807 if (ent
->flags
& ESP_CMD_FLAG_WRITE
) {
1808 /* XXX parity errors, etc. XXX */
1810 esp
->ops
->dma_drain(esp
);
1812 esp
->ops
->dma_invalidate(esp
);
1814 if (esp
->ireg
!= ESP_INTR_BSERV
) {
1815 /* We should always see exactly a bus-service
1816 * interrupt at the end of a successful transfer.
1818 shost_printk(KERN_INFO
, esp
->host
,
1819 "data done, not BSERV, resetting\n");
1820 esp_schedule_reset(esp
);
1824 bytes_sent
= esp_data_bytes_sent(esp
, ent
, cmd
);
1826 esp_log_datadone("data done flgs[%x] sent[%d]\n",
1827 ent
->flags
, bytes_sent
);
1829 if (bytes_sent
< 0) {
1830 /* XXX force sync mode for this target XXX */
1831 esp_schedule_reset(esp
);
1835 esp_advance_dma(esp
, ent
, cmd
, bytes_sent
);
1836 esp_event(esp
, ESP_EVENT_CHECK_PHASE
);
1840 case ESP_EVENT_STATUS
: {
1841 struct esp_cmd_entry
*ent
= esp
->active_cmd
;
1843 if (esp
->ireg
& ESP_INTR_FDONE
) {
1844 ent
->status
= esp_read8(ESP_FDATA
);
1845 ent
->message
= esp_read8(ESP_FDATA
);
1846 scsi_esp_cmd(esp
, ESP_CMD_MOK
);
1847 } else if (esp
->ireg
== ESP_INTR_BSERV
) {
1848 ent
->status
= esp_read8(ESP_FDATA
);
1849 ent
->message
= 0xff;
1850 esp_event(esp
, ESP_EVENT_MSGIN
);
1854 if (ent
->message
!= COMMAND_COMPLETE
) {
1855 shost_printk(KERN_INFO
, esp
->host
,
1856 "Unexpected message %x in status\n",
1858 esp_schedule_reset(esp
);
1862 esp_event(esp
, ESP_EVENT_FREE_BUS
);
1863 esp
->flags
|= ESP_FLAG_QUICKIRQ_CHECK
;
1866 case ESP_EVENT_FREE_BUS
: {
1867 struct esp_cmd_entry
*ent
= esp
->active_cmd
;
1868 struct scsi_cmnd
*cmd
= ent
->cmd
;
1870 if (ent
->message
== COMMAND_COMPLETE
||
1871 ent
->message
== DISCONNECT
)
1872 scsi_esp_cmd(esp
, ESP_CMD_ESEL
);
1874 if (ent
->message
== COMMAND_COMPLETE
) {
1875 esp_log_cmddone("Command done status[%x] message[%x]\n",
1876 ent
->status
, ent
->message
);
1877 if (ent
->status
== SAM_STAT_TASK_SET_FULL
)
1878 esp_event_queue_full(esp
, ent
);
1880 if (ent
->status
== SAM_STAT_CHECK_CONDITION
&&
1881 !(ent
->flags
& ESP_CMD_FLAG_AUTOSENSE
)) {
1882 ent
->flags
|= ESP_CMD_FLAG_AUTOSENSE
;
1883 esp_autosense(esp
, ent
);
1885 esp_cmd_is_done(esp
, ent
, cmd
,
1886 compose_result(ent
->status
,
1890 } else if (ent
->message
== DISCONNECT
) {
1891 esp_log_disconnect("Disconnecting tgt[%d] tag[%x:%x]\n",
1893 ent
->tag
[0], ent
->tag
[1]);
1895 esp
->active_cmd
= NULL
;
1896 esp_maybe_execute_command(esp
);
1898 shost_printk(KERN_INFO
, esp
->host
,
1899 "Unexpected message %x in freebus\n",
1901 esp_schedule_reset(esp
);
1904 if (esp
->active_cmd
)
1905 esp
->flags
|= ESP_FLAG_QUICKIRQ_CHECK
;
1908 case ESP_EVENT_MSGOUT
: {
1909 scsi_esp_cmd(esp
, ESP_CMD_FLUSH
);
1911 if (esp_debug
& ESP_DEBUG_MSGOUT
) {
1913 printk("ESP: Sending message [ ");
1914 for (i
= 0; i
< esp
->msg_out_len
; i
++)
1915 printk("%02x ", esp
->msg_out
[i
]);
1919 if (esp
->rev
== FASHME
) {
1922 /* Always use the fifo. */
1923 for (i
= 0; i
< esp
->msg_out_len
; i
++) {
1924 esp_write8(esp
->msg_out
[i
], ESP_FDATA
);
1925 esp_write8(0, ESP_FDATA
);
1927 scsi_esp_cmd(esp
, ESP_CMD_TI
);
1929 if (esp
->msg_out_len
== 1) {
1930 esp_write8(esp
->msg_out
[0], ESP_FDATA
);
1931 scsi_esp_cmd(esp
, ESP_CMD_TI
);
1932 } else if (esp
->flags
& ESP_FLAG_USE_FIFO
) {
1933 for (i
= 0; i
< esp
->msg_out_len
; i
++)
1934 esp_write8(esp
->msg_out
[i
], ESP_FDATA
);
1935 scsi_esp_cmd(esp
, ESP_CMD_TI
);
1938 memcpy(esp
->command_block
,
1942 esp
->ops
->send_dma_cmd(esp
,
1943 esp
->command_block_dma
,
1947 ESP_CMD_DMA
|ESP_CMD_TI
);
1950 esp_event(esp
, ESP_EVENT_MSGOUT_DONE
);
1953 case ESP_EVENT_MSGOUT_DONE
:
1954 if (esp
->rev
== FASHME
) {
1955 scsi_esp_cmd(esp
, ESP_CMD_FLUSH
);
1957 if (esp
->msg_out_len
> 1)
1958 esp
->ops
->dma_invalidate(esp
);
1961 if (!(esp
->ireg
& ESP_INTR_DC
)) {
1962 if (esp
->rev
!= FASHME
)
1963 scsi_esp_cmd(esp
, ESP_CMD_NULL
);
1965 esp_event(esp
, ESP_EVENT_CHECK_PHASE
);
1967 case ESP_EVENT_MSGIN
:
1968 if (esp
->ireg
& ESP_INTR_BSERV
) {
1969 if (esp
->rev
== FASHME
) {
1970 if (!(esp_read8(ESP_STATUS2
) &
1972 scsi_esp_cmd(esp
, ESP_CMD_FLUSH
);
1974 scsi_esp_cmd(esp
, ESP_CMD_FLUSH
);
1975 if (esp
->rev
== ESP100
)
1976 scsi_esp_cmd(esp
, ESP_CMD_NULL
);
1978 scsi_esp_cmd(esp
, ESP_CMD_TI
);
1979 esp
->flags
|= ESP_FLAG_QUICKIRQ_CHECK
;
1982 if (esp
->ireg
& ESP_INTR_FDONE
) {
1985 if (esp
->rev
== FASHME
)
1988 val
= esp_read8(ESP_FDATA
);
1989 esp
->msg_in
[esp
->msg_in_len
++] = val
;
1991 esp_log_msgin("Got msgin byte %x\n", val
);
1993 if (!esp_msgin_process(esp
))
1994 esp
->msg_in_len
= 0;
1996 if (esp
->rev
== FASHME
)
1997 scsi_esp_cmd(esp
, ESP_CMD_FLUSH
);
1999 scsi_esp_cmd(esp
, ESP_CMD_MOK
);
2001 if (esp
->event
!= ESP_EVENT_FREE_BUS
)
2002 esp_event(esp
, ESP_EVENT_CHECK_PHASE
);
2004 shost_printk(KERN_INFO
, esp
->host
,
2005 "MSGIN neither BSERV not FDON, resetting");
2006 esp_schedule_reset(esp
);
2010 case ESP_EVENT_CMD_START
:
2011 memcpy(esp
->command_block
, esp
->cmd_bytes_ptr
,
2012 esp
->cmd_bytes_left
);
2013 esp_send_dma_cmd(esp
, esp
->cmd_bytes_left
, 16, ESP_CMD_TI
);
2014 esp_event(esp
, ESP_EVENT_CMD_DONE
);
2015 esp
->flags
|= ESP_FLAG_QUICKIRQ_CHECK
;
2017 case ESP_EVENT_CMD_DONE
:
2018 esp
->ops
->dma_invalidate(esp
);
2019 if (esp
->ireg
& ESP_INTR_BSERV
) {
2020 esp_event(esp
, ESP_EVENT_CHECK_PHASE
);
2023 esp_schedule_reset(esp
);
2027 case ESP_EVENT_RESET
:
2028 scsi_esp_cmd(esp
, ESP_CMD_RS
);
2032 shost_printk(KERN_INFO
, esp
->host
,
2033 "Unexpected event %x, resetting\n", esp
->event
);
2034 esp_schedule_reset(esp
);
2041 static void esp_reset_cleanup_one(struct esp
*esp
, struct esp_cmd_entry
*ent
)
2043 struct scsi_cmnd
*cmd
= ent
->cmd
;
2045 esp_unmap_dma(esp
, cmd
);
2046 esp_free_lun_tag(ent
, cmd
->device
->hostdata
);
2047 cmd
->result
= DID_RESET
<< 16;
2049 if (ent
->flags
& ESP_CMD_FLAG_AUTOSENSE
) {
2050 esp
->ops
->unmap_single(esp
, ent
->sense_dma
,
2051 SCSI_SENSE_BUFFERSIZE
, DMA_FROM_DEVICE
);
2052 ent
->sense_ptr
= NULL
;
2055 cmd
->scsi_done(cmd
);
2056 list_del(&ent
->list
);
2057 esp_put_ent(esp
, ent
);
2060 static void esp_clear_hold(struct scsi_device
*dev
, void *data
)
2062 struct esp_lun_data
*lp
= dev
->hostdata
;
2064 BUG_ON(lp
->num_tagged
);
2068 static void esp_reset_cleanup(struct esp
*esp
)
2070 struct esp_cmd_entry
*ent
, *tmp
;
2073 list_for_each_entry_safe(ent
, tmp
, &esp
->queued_cmds
, list
) {
2074 struct scsi_cmnd
*cmd
= ent
->cmd
;
2076 list_del(&ent
->list
);
2077 cmd
->result
= DID_RESET
<< 16;
2078 cmd
->scsi_done(cmd
);
2079 esp_put_ent(esp
, ent
);
2082 list_for_each_entry_safe(ent
, tmp
, &esp
->active_cmds
, list
) {
2083 if (ent
== esp
->active_cmd
)
2084 esp
->active_cmd
= NULL
;
2085 esp_reset_cleanup_one(esp
, ent
);
2088 BUG_ON(esp
->active_cmd
!= NULL
);
2090 /* Force renegotiation of sync/wide transfers. */
2091 for (i
= 0; i
< ESP_MAX_TARGET
; i
++) {
2092 struct esp_target_data
*tp
= &esp
->target
[i
];
2096 tp
->esp_config3
&= ~(ESP_CONFIG3_EWIDE
|
2099 tp
->flags
&= ~ESP_TGT_WIDE
;
2100 tp
->flags
|= ESP_TGT_CHECK_NEGO
;
2103 __starget_for_each_device(tp
->starget
, NULL
,
2106 esp
->flags
&= ~ESP_FLAG_RESETTING
;
2109 /* Runs under host->lock */
2110 static void __esp_interrupt(struct esp
*esp
)
2112 int finish_reset
, intr_done
;
2116 * Once INTRPT is read STATUS and SSTEP are cleared.
2118 esp
->sreg
= esp_read8(ESP_STATUS
);
2119 esp
->seqreg
= esp_read8(ESP_SSTEP
);
2120 esp
->ireg
= esp_read8(ESP_INTRPT
);
2122 if (esp
->flags
& ESP_FLAG_RESETTING
) {
2125 if (esp_check_gross_error(esp
))
2128 finish_reset
= esp_check_spur_intr(esp
);
2129 if (finish_reset
< 0)
2133 if (esp
->ireg
& ESP_INTR_SR
)
2137 esp_reset_cleanup(esp
);
2138 if (esp
->eh_reset
) {
2139 complete(esp
->eh_reset
);
2140 esp
->eh_reset
= NULL
;
2145 phase
= (esp
->sreg
& ESP_STAT_PMASK
);
2146 if (esp
->rev
== FASHME
) {
2147 if (((phase
!= ESP_DIP
&& phase
!= ESP_DOP
) &&
2148 esp
->select_state
== ESP_SELECT_NONE
&&
2149 esp
->event
!= ESP_EVENT_STATUS
&&
2150 esp
->event
!= ESP_EVENT_DATA_DONE
) ||
2151 (esp
->ireg
& ESP_INTR_RSEL
)) {
2152 esp
->sreg2
= esp_read8(ESP_STATUS2
);
2153 if (!(esp
->sreg2
& ESP_STAT2_FEMPTY
) ||
2154 (esp
->sreg2
& ESP_STAT2_F1BYTE
))
2159 esp_log_intr("intr sreg[%02x] seqreg[%02x] "
2160 "sreg2[%02x] ireg[%02x]\n",
2161 esp
->sreg
, esp
->seqreg
, esp
->sreg2
, esp
->ireg
);
2165 if (esp
->ireg
& (ESP_INTR_S
| ESP_INTR_SATN
| ESP_INTR_IC
)) {
2166 shost_printk(KERN_INFO
, esp
->host
,
2167 "unexpected IREG %02x\n", esp
->ireg
);
2168 if (esp
->ireg
& ESP_INTR_IC
)
2169 esp_dump_cmd_log(esp
);
2171 esp_schedule_reset(esp
);
2173 if (!(esp
->ireg
& ESP_INTR_RSEL
)) {
2174 /* Some combination of FDONE, BSERV, DC. */
2175 if (esp
->select_state
!= ESP_SELECT_NONE
)
2176 intr_done
= esp_finish_select(esp
);
2177 } else if (esp
->ireg
& ESP_INTR_RSEL
) {
2178 if (esp
->active_cmd
)
2179 (void) esp_finish_select(esp
);
2180 intr_done
= esp_reconnect(esp
);
2184 intr_done
= esp_process_event(esp
);
2187 irqreturn_t
scsi_esp_intr(int irq
, void *dev_id
)
2189 struct esp
*esp
= dev_id
;
2190 unsigned long flags
;
2193 spin_lock_irqsave(esp
->host
->host_lock
, flags
);
2195 if (esp
->ops
->irq_pending(esp
)) {
2200 __esp_interrupt(esp
);
2201 if (!(esp
->flags
& ESP_FLAG_QUICKIRQ_CHECK
))
2203 esp
->flags
&= ~ESP_FLAG_QUICKIRQ_CHECK
;
2205 for (i
= 0; i
< ESP_QUICKIRQ_LIMIT
; i
++) {
2206 if (esp
->ops
->irq_pending(esp
))
2209 if (i
== ESP_QUICKIRQ_LIMIT
)
2213 spin_unlock_irqrestore(esp
->host
->host_lock
, flags
);
2217 EXPORT_SYMBOL(scsi_esp_intr
);
2219 static void esp_get_revision(struct esp
*esp
)
2223 esp
->config1
= (ESP_CONFIG1_PENABLE
| (esp
->scsi_id
& 7));
2224 if (esp
->config2
== 0) {
2225 esp
->config2
= (ESP_CONFIG2_SCSI2ENAB
| ESP_CONFIG2_REGPARITY
);
2226 esp_write8(esp
->config2
, ESP_CFG2
);
2228 val
= esp_read8(ESP_CFG2
);
2229 val
&= ~ESP_CONFIG2_MAGIC
;
2232 if (val
!= (ESP_CONFIG2_SCSI2ENAB
| ESP_CONFIG2_REGPARITY
)) {
2234 * If what we write to cfg2 does not come back,
2235 * cfg2 is not implemented.
2236 * Therefore this must be a plain esp100.
2243 esp_set_all_config3(esp
, 5);
2245 esp_write8(esp
->config2
, ESP_CFG2
);
2246 esp_write8(0, ESP_CFG3
);
2247 esp_write8(esp
->prev_cfg3
, ESP_CFG3
);
2249 val
= esp_read8(ESP_CFG3
);
2251 /* The cfg2 register is implemented, however
2252 * cfg3 is not, must be esp100a.
2256 esp_set_all_config3(esp
, 0);
2258 esp_write8(esp
->prev_cfg3
, ESP_CFG3
);
2260 /* All of cfg{1,2,3} implemented, must be one of
2261 * the fas variants, figure out which one.
2263 if (esp
->cfact
== 0 || esp
->cfact
> ESP_CCF_F5
) {
2265 esp
->sync_defp
= SYNC_DEFP_FAST
;
2272 static void esp_init_swstate(struct esp
*esp
)
2276 INIT_LIST_HEAD(&esp
->queued_cmds
);
2277 INIT_LIST_HEAD(&esp
->active_cmds
);
2278 INIT_LIST_HEAD(&esp
->esp_cmd_pool
);
2280 /* Start with a clear state, domain validation (via ->slave_configure,
2281 * spi_dv_device()) will attempt to enable SYNC, WIDE, and tagged
2284 for (i
= 0 ; i
< ESP_MAX_TARGET
; i
++) {
2285 esp
->target
[i
].flags
= 0;
2286 esp
->target
[i
].nego_goal_period
= 0;
2287 esp
->target
[i
].nego_goal_offset
= 0;
2288 esp
->target
[i
].nego_goal_width
= 0;
2289 esp
->target
[i
].nego_goal_tags
= 0;
2293 /* This places the ESP into a known state at boot time. */
2294 static void esp_bootup_reset(struct esp
*esp
)
2299 esp
->ops
->reset_dma(esp
);
2304 /* Reset the SCSI bus, but tell ESP not to generate an irq */
2305 val
= esp_read8(ESP_CFG1
);
2306 val
|= ESP_CONFIG1_SRRDISAB
;
2307 esp_write8(val
, ESP_CFG1
);
2309 scsi_esp_cmd(esp
, ESP_CMD_RS
);
2312 esp_write8(esp
->config1
, ESP_CFG1
);
2314 /* Eat any bitrot in the chip and we are done... */
2315 esp_read8(ESP_INTRPT
);
2318 static void esp_set_clock_params(struct esp
*esp
)
2323 /* This is getting messy but it has to be done correctly or else
2324 * you get weird behavior all over the place. We are trying to
2325 * basically figure out three pieces of information.
2327 * a) Clock Conversion Factor
2329 * This is a representation of the input crystal clock frequency
2330 * going into the ESP on this machine. Any operation whose timing
2331 * is longer than 400ns depends on this value being correct. For
2332 * example, you'll get blips for arbitration/selection during high
2333 * load or with multiple targets if this is not set correctly.
2335 * b) Selection Time-Out
2337 * The ESP isn't very bright and will arbitrate for the bus and try
2338 * to select a target forever if you let it. This value tells the
2339 * ESP when it has taken too long to negotiate and that it should
2340 * interrupt the CPU so we can see what happened. The value is
2341 * computed as follows (from NCR/Symbios chip docs).
2343 * (Time Out Period) * (Input Clock)
2344 * STO = ----------------------------------
2345 * (8192) * (Clock Conversion Factor)
2347 * We use a time out period of 250ms (ESP_BUS_TIMEOUT).
2349 * c) Imperical constants for synchronous offset and transfer period
2352 * This entails the smallest and largest sync period we could ever
2353 * handle on this ESP.
2357 ccf
= ((fhz
/ 1000000) + 4) / 5;
2361 /* If we can't find anything reasonable, just assume 20MHZ.
2362 * This is the clock frequency of the older sun4c's where I've
2363 * been unable to find the clock-frequency PROM property. All
2364 * other machines provide useful values it seems.
2366 if (fhz
<= 5000000 || ccf
< 1 || ccf
> 8) {
2371 esp
->cfact
= (ccf
== 8 ? 0 : ccf
);
2373 esp
->ccycle
= ESP_HZ_TO_CYCLE(fhz
);
2374 esp
->ctick
= ESP_TICK(ccf
, esp
->ccycle
);
2375 esp
->neg_defp
= ESP_NEG_DEFP(fhz
, ccf
);
2376 esp
->sync_defp
= SYNC_DEFP_SLOW
;
2379 static const char *esp_chip_names
[] = {
2390 static struct scsi_transport_template
*esp_transport_template
;
2392 int scsi_esp_register(struct esp
*esp
, struct device
*dev
)
2394 static int instance
;
2398 esp
->num_tags
= ESP_DEFAULT_TAGS
;
2399 esp
->host
->transportt
= esp_transport_template
;
2400 esp
->host
->max_lun
= ESP_MAX_LUN
;
2401 esp
->host
->cmd_per_lun
= 2;
2402 esp
->host
->unique_id
= instance
;
2404 esp_set_clock_params(esp
);
2406 esp_get_revision(esp
);
2408 esp_init_swstate(esp
);
2410 esp_bootup_reset(esp
);
2412 dev_printk(KERN_INFO
, dev
, "esp%u: regs[%1p:%1p] irq[%u]\n",
2413 esp
->host
->unique_id
, esp
->regs
, esp
->dma_regs
,
2415 dev_printk(KERN_INFO
, dev
,
2416 "esp%u: is a %s, %u MHz (ccf=%u), SCSI ID %u\n",
2417 esp
->host
->unique_id
, esp_chip_names
[esp
->rev
],
2418 esp
->cfreq
/ 1000000, esp
->cfact
, esp
->scsi_id
);
2420 /* Let the SCSI bus reset settle. */
2421 ssleep(esp_bus_reset_settle
);
2423 err
= scsi_add_host(esp
->host
, dev
);
2429 scsi_scan_host(esp
->host
);
2433 EXPORT_SYMBOL(scsi_esp_register
);
2435 void scsi_esp_unregister(struct esp
*esp
)
2437 scsi_remove_host(esp
->host
);
2439 EXPORT_SYMBOL(scsi_esp_unregister
);
2441 static int esp_target_alloc(struct scsi_target
*starget
)
2443 struct esp
*esp
= shost_priv(dev_to_shost(&starget
->dev
));
2444 struct esp_target_data
*tp
= &esp
->target
[starget
->id
];
2446 tp
->starget
= starget
;
2451 static void esp_target_destroy(struct scsi_target
*starget
)
2453 struct esp
*esp
= shost_priv(dev_to_shost(&starget
->dev
));
2454 struct esp_target_data
*tp
= &esp
->target
[starget
->id
];
2459 static int esp_slave_alloc(struct scsi_device
*dev
)
2461 struct esp
*esp
= shost_priv(dev
->host
);
2462 struct esp_target_data
*tp
= &esp
->target
[dev
->id
];
2463 struct esp_lun_data
*lp
;
2465 lp
= kzalloc(sizeof(*lp
), GFP_KERNEL
);
2470 spi_min_period(tp
->starget
) = esp
->min_period
;
2471 spi_max_offset(tp
->starget
) = 15;
2473 if (esp
->flags
& ESP_FLAG_WIDE_CAPABLE
)
2474 spi_max_width(tp
->starget
) = 1;
2476 spi_max_width(tp
->starget
) = 0;
2481 static int esp_slave_configure(struct scsi_device
*dev
)
2483 struct esp
*esp
= shost_priv(dev
->host
);
2484 struct esp_target_data
*tp
= &esp
->target
[dev
->id
];
2486 if (dev
->tagged_supported
)
2487 scsi_change_queue_depth(dev
, esp
->num_tags
);
2489 tp
->flags
|= ESP_TGT_DISCONNECT
;
2491 if (!spi_initial_dv(dev
->sdev_target
))
2497 static void esp_slave_destroy(struct scsi_device
*dev
)
2499 struct esp_lun_data
*lp
= dev
->hostdata
;
2502 dev
->hostdata
= NULL
;
2505 static int esp_eh_abort_handler(struct scsi_cmnd
*cmd
)
2507 struct esp
*esp
= shost_priv(cmd
->device
->host
);
2508 struct esp_cmd_entry
*ent
, *tmp
;
2509 struct completion eh_done
;
2510 unsigned long flags
;
2512 /* XXX This helps a lot with debugging but might be a bit
2513 * XXX much for the final driver.
2515 spin_lock_irqsave(esp
->host
->host_lock
, flags
);
2516 shost_printk(KERN_ERR
, esp
->host
, "Aborting command [%p:%02x]\n",
2518 ent
= esp
->active_cmd
;
2520 shost_printk(KERN_ERR
, esp
->host
,
2521 "Current command [%p:%02x]\n",
2522 ent
->cmd
, ent
->cmd
->cmnd
[0]);
2523 list_for_each_entry(ent
, &esp
->queued_cmds
, list
) {
2524 shost_printk(KERN_ERR
, esp
->host
, "Queued command [%p:%02x]\n",
2525 ent
->cmd
, ent
->cmd
->cmnd
[0]);
2527 list_for_each_entry(ent
, &esp
->active_cmds
, list
) {
2528 shost_printk(KERN_ERR
, esp
->host
, " Active command [%p:%02x]\n",
2529 ent
->cmd
, ent
->cmd
->cmnd
[0]);
2531 esp_dump_cmd_log(esp
);
2532 spin_unlock_irqrestore(esp
->host
->host_lock
, flags
);
2534 spin_lock_irqsave(esp
->host
->host_lock
, flags
);
2537 list_for_each_entry(tmp
, &esp
->queued_cmds
, list
) {
2538 if (tmp
->cmd
== cmd
) {
2545 /* Easiest case, we didn't even issue the command
2546 * yet so it is trivial to abort.
2548 list_del(&ent
->list
);
2550 cmd
->result
= DID_ABORT
<< 16;
2551 cmd
->scsi_done(cmd
);
2553 esp_put_ent(esp
, ent
);
2558 init_completion(&eh_done
);
2560 ent
= esp
->active_cmd
;
2561 if (ent
&& ent
->cmd
== cmd
) {
2562 /* Command is the currently active command on
2563 * the bus. If we already have an output message
2566 if (esp
->msg_out_len
)
2569 /* Send out an abort, encouraging the target to
2570 * go to MSGOUT phase by asserting ATN.
2572 esp
->msg_out
[0] = ABORT_TASK_SET
;
2573 esp
->msg_out_len
= 1;
2574 ent
->eh_done
= &eh_done
;
2576 scsi_esp_cmd(esp
, ESP_CMD_SATN
);
2578 /* The command is disconnected. This is not easy to
2579 * abort. For now we fail and let the scsi error
2580 * handling layer go try a scsi bus reset or host
2583 * What we could do is put together a scsi command
2584 * solely for the purpose of sending an abort message
2585 * to the target. Coming up with all the code to
2586 * cook up scsi commands, special case them everywhere,
2587 * etc. is for questionable gain and it would be better
2588 * if the generic scsi error handling layer could do at
2589 * least some of that for us.
2591 * Anyways this is an area for potential future improvement
2597 spin_unlock_irqrestore(esp
->host
->host_lock
, flags
);
2599 if (!wait_for_completion_timeout(&eh_done
, 5 * HZ
)) {
2600 spin_lock_irqsave(esp
->host
->host_lock
, flags
);
2601 ent
->eh_done
= NULL
;
2602 spin_unlock_irqrestore(esp
->host
->host_lock
, flags
);
2610 spin_unlock_irqrestore(esp
->host
->host_lock
, flags
);
2614 /* XXX This might be a good location to set ESP_TGT_BROKEN
2615 * XXX since we know which target/lun in particular is
2616 * XXX causing trouble.
2618 spin_unlock_irqrestore(esp
->host
->host_lock
, flags
);
2622 static int esp_eh_bus_reset_handler(struct scsi_cmnd
*cmd
)
2624 struct esp
*esp
= shost_priv(cmd
->device
->host
);
2625 struct completion eh_reset
;
2626 unsigned long flags
;
2628 init_completion(&eh_reset
);
2630 spin_lock_irqsave(esp
->host
->host_lock
, flags
);
2632 esp
->eh_reset
= &eh_reset
;
2634 /* XXX This is too simple... We should add lots of
2635 * XXX checks here so that if we find that the chip is
2636 * XXX very wedged we return failure immediately so
2637 * XXX that we can perform a full chip reset.
2639 esp
->flags
|= ESP_FLAG_RESETTING
;
2640 scsi_esp_cmd(esp
, ESP_CMD_RS
);
2642 spin_unlock_irqrestore(esp
->host
->host_lock
, flags
);
2644 ssleep(esp_bus_reset_settle
);
2646 if (!wait_for_completion_timeout(&eh_reset
, 5 * HZ
)) {
2647 spin_lock_irqsave(esp
->host
->host_lock
, flags
);
2648 esp
->eh_reset
= NULL
;
2649 spin_unlock_irqrestore(esp
->host
->host_lock
, flags
);
2657 /* All bets are off, reset the entire device. */
2658 static int esp_eh_host_reset_handler(struct scsi_cmnd
*cmd
)
2660 struct esp
*esp
= shost_priv(cmd
->device
->host
);
2661 unsigned long flags
;
2663 spin_lock_irqsave(esp
->host
->host_lock
, flags
);
2664 esp_bootup_reset(esp
);
2665 esp_reset_cleanup(esp
);
2666 spin_unlock_irqrestore(esp
->host
->host_lock
, flags
);
2668 ssleep(esp_bus_reset_settle
);
2673 static const char *esp_info(struct Scsi_Host
*host
)
2678 struct scsi_host_template scsi_esp_template
= {
2679 .module
= THIS_MODULE
,
2682 .queuecommand
= esp_queuecommand
,
2683 .target_alloc
= esp_target_alloc
,
2684 .target_destroy
= esp_target_destroy
,
2685 .slave_alloc
= esp_slave_alloc
,
2686 .slave_configure
= esp_slave_configure
,
2687 .slave_destroy
= esp_slave_destroy
,
2688 .eh_abort_handler
= esp_eh_abort_handler
,
2689 .eh_bus_reset_handler
= esp_eh_bus_reset_handler
,
2690 .eh_host_reset_handler
= esp_eh_host_reset_handler
,
2693 .sg_tablesize
= SG_ALL
,
2694 .use_clustering
= ENABLE_CLUSTERING
,
2695 .max_sectors
= 0xffff,
2696 .skip_settle_delay
= 1,
2699 EXPORT_SYMBOL(scsi_esp_template
);
2701 static void esp_get_signalling(struct Scsi_Host
*host
)
2703 struct esp
*esp
= shost_priv(host
);
2704 enum spi_signal_type type
;
2706 if (esp
->flags
& ESP_FLAG_DIFFERENTIAL
)
2707 type
= SPI_SIGNAL_HVD
;
2709 type
= SPI_SIGNAL_SE
;
2711 spi_signalling(host
) = type
;
2714 static void esp_set_offset(struct scsi_target
*target
, int offset
)
2716 struct Scsi_Host
*host
= dev_to_shost(target
->dev
.parent
);
2717 struct esp
*esp
= shost_priv(host
);
2718 struct esp_target_data
*tp
= &esp
->target
[target
->id
];
2720 if (esp
->flags
& ESP_FLAG_DISABLE_SYNC
)
2721 tp
->nego_goal_offset
= 0;
2723 tp
->nego_goal_offset
= offset
;
2724 tp
->flags
|= ESP_TGT_CHECK_NEGO
;
2727 static void esp_set_period(struct scsi_target
*target
, int period
)
2729 struct Scsi_Host
*host
= dev_to_shost(target
->dev
.parent
);
2730 struct esp
*esp
= shost_priv(host
);
2731 struct esp_target_data
*tp
= &esp
->target
[target
->id
];
2733 tp
->nego_goal_period
= period
;
2734 tp
->flags
|= ESP_TGT_CHECK_NEGO
;
2737 static void esp_set_width(struct scsi_target
*target
, int width
)
2739 struct Scsi_Host
*host
= dev_to_shost(target
->dev
.parent
);
2740 struct esp
*esp
= shost_priv(host
);
2741 struct esp_target_data
*tp
= &esp
->target
[target
->id
];
2743 tp
->nego_goal_width
= (width
? 1 : 0);
2744 tp
->flags
|= ESP_TGT_CHECK_NEGO
;
2747 static struct spi_function_template esp_transport_ops
= {
2748 .set_offset
= esp_set_offset
,
2750 .set_period
= esp_set_period
,
2752 .set_width
= esp_set_width
,
2754 .get_signalling
= esp_get_signalling
,
2757 static int __init
esp_init(void)
2759 BUILD_BUG_ON(sizeof(struct scsi_pointer
) <
2760 sizeof(struct esp_cmd_priv
));
2762 esp_transport_template
= spi_attach_transport(&esp_transport_ops
);
2763 if (!esp_transport_template
)
2769 static void __exit
esp_exit(void)
2771 spi_release_transport(esp_transport_template
);
2774 MODULE_DESCRIPTION("ESP SCSI driver core");
2775 MODULE_AUTHOR("David S. Miller (davem@davemloft.net)");
2776 MODULE_LICENSE("GPL");
2777 MODULE_VERSION(DRV_VERSION
);
2779 module_param(esp_bus_reset_settle
, int, 0);
2780 MODULE_PARM_DESC(esp_bus_reset_settle
,
2781 "ESP scsi bus reset delay in seconds");
2783 module_param(esp_debug
, int, 0);
2784 MODULE_PARM_DESC(esp_debug
,
2785 "ESP bitmapped debugging message enable value:\n"
2786 " 0x00000001 Log interrupt events\n"
2787 " 0x00000002 Log scsi commands\n"
2788 " 0x00000004 Log resets\n"
2789 " 0x00000008 Log message in events\n"
2790 " 0x00000010 Log message out events\n"
2791 " 0x00000020 Log command completion\n"
2792 " 0x00000040 Log disconnects\n"
2793 " 0x00000080 Log data start\n"
2794 " 0x00000100 Log data done\n"
2795 " 0x00000200 Log reconnects\n"
2796 " 0x00000400 Log auto-sense data\n"
2799 module_init(esp_init
);
2800 module_exit(esp_exit
);