2 * Virtio SCSI HBA driver
4 * Copyright IBM Corp. 2010
5 * Copyright Red Hat, Inc. 2011
8 * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
9 * Paolo Bonzini <pbonzini@redhat.com>
11 * This work is licensed under the terms of the GNU GPL, version 2 or later.
12 * See the COPYING file in the top-level directory.
16 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
18 #include <linux/module.h>
19 #include <linux/slab.h>
20 #include <linux/mempool.h>
21 #include <linux/virtio.h>
22 #include <linux/virtio_ids.h>
23 #include <linux/virtio_config.h>
24 #include <linux/virtio_scsi.h>
25 #include <linux/cpu.h>
26 #include <linux/blkdev.h>
27 #include <scsi/scsi_host.h>
28 #include <scsi/scsi_device.h>
29 #include <scsi/scsi_cmnd.h>
30 #include <scsi/scsi_tcq.h>
31 #include <linux/seqlock.h>
33 #define VIRTIO_SCSI_MEMPOOL_SZ 64
34 #define VIRTIO_SCSI_EVENT_LEN 8
35 #define VIRTIO_SCSI_VQ_BASE 2
37 /* Command queue element */
38 struct virtio_scsi_cmd
{
40 struct completion
*comp
;
42 struct virtio_scsi_cmd_req cmd
;
43 struct virtio_scsi_cmd_req_pi cmd_pi
;
44 struct virtio_scsi_ctrl_tmf_req tmf
;
45 struct virtio_scsi_ctrl_an_req an
;
48 struct virtio_scsi_cmd_resp cmd
;
49 struct virtio_scsi_ctrl_tmf_resp tmf
;
50 struct virtio_scsi_ctrl_an_resp an
;
51 struct virtio_scsi_event evt
;
53 } ____cacheline_aligned_in_smp
;
55 struct virtio_scsi_event_node
{
56 struct virtio_scsi
*vscsi
;
57 struct virtio_scsi_event event
;
58 struct work_struct work
;
61 struct virtio_scsi_vq
{
69 * Per-target queue state.
71 * This struct holds the data needed by the queue steering policy. When a
72 * target is sent multiple requests, we need to drive them to the same queue so
73 * that FIFO processing order is kept. However, if a target was idle, we can
74 * choose a queue arbitrarily. In this case the queue is chosen according to
75 * the current VCPU, so the driver expects the number of request queues to be
76 * equal to the number of VCPUs. This makes it easy and fast to select the
77 * queue, and also lets the driver optimize the IRQ affinity for the virtqueues
78 * (each virtqueue's affinity is set to the CPU that "owns" the queue).
80 * tgt_seq is held to serialize reading and writing req_vq.
82 * Decrements of reqs are never concurrent with writes of req_vq: before the
83 * decrement reqs will be != 0; after the decrement the virtqueue completion
84 * routine will not use the req_vq so it can be changed by a new request.
85 * Thus they can happen outside the tgt_seq, provided of course we make reqs
88 struct virtio_scsi_target_state
{
91 /* Count of outstanding requests. */
94 /* Currently active virtqueue for requests sent to this target. */
95 struct virtio_scsi_vq
*req_vq
;
98 /* Driver instance state */
100 struct virtio_device
*vdev
;
102 /* Get some buffers ready for event vq */
103 struct virtio_scsi_event_node event_list
[VIRTIO_SCSI_EVENT_LEN
];
107 /* If the affinity hint is set for virtqueues */
108 bool affinity_hint_set
;
110 /* CPU hotplug notifier */
111 struct notifier_block nb
;
113 /* Protected by event_vq lock */
116 struct virtio_scsi_vq ctrl_vq
;
117 struct virtio_scsi_vq event_vq
;
118 struct virtio_scsi_vq req_vqs
[];
121 static struct kmem_cache
*virtscsi_cmd_cache
;
122 static mempool_t
*virtscsi_cmd_pool
;
124 static inline struct Scsi_Host
*virtio_scsi_host(struct virtio_device
*vdev
)
129 static void virtscsi_compute_resid(struct scsi_cmnd
*sc
, u32 resid
)
134 if (!scsi_bidi_cmnd(sc
)) {
135 scsi_set_resid(sc
, resid
);
139 scsi_in(sc
)->resid
= min(resid
, scsi_in(sc
)->length
);
140 scsi_out(sc
)->resid
= resid
- scsi_in(sc
)->resid
;
144 * virtscsi_complete_cmd - finish a scsi_cmd and invoke scsi_done
146 * Called with vq_lock held.
148 static void virtscsi_complete_cmd(struct virtio_scsi
*vscsi
, void *buf
)
150 struct virtio_scsi_cmd
*cmd
= buf
;
151 struct scsi_cmnd
*sc
= cmd
->sc
;
152 struct virtio_scsi_cmd_resp
*resp
= &cmd
->resp
.cmd
;
153 struct virtio_scsi_target_state
*tgt
=
154 scsi_target(sc
->device
)->hostdata
;
156 dev_dbg(&sc
->device
->sdev_gendev
,
157 "cmd %p response %u status %#02x sense_len %u\n",
158 sc
, resp
->response
, resp
->status
, resp
->sense_len
);
160 sc
->result
= resp
->status
;
161 virtscsi_compute_resid(sc
, virtio32_to_cpu(vscsi
->vdev
, resp
->resid
));
162 switch (resp
->response
) {
163 case VIRTIO_SCSI_S_OK
:
164 set_host_byte(sc
, DID_OK
);
166 case VIRTIO_SCSI_S_OVERRUN
:
167 set_host_byte(sc
, DID_ERROR
);
169 case VIRTIO_SCSI_S_ABORTED
:
170 set_host_byte(sc
, DID_ABORT
);
172 case VIRTIO_SCSI_S_BAD_TARGET
:
173 set_host_byte(sc
, DID_BAD_TARGET
);
175 case VIRTIO_SCSI_S_RESET
:
176 set_host_byte(sc
, DID_RESET
);
178 case VIRTIO_SCSI_S_BUSY
:
179 set_host_byte(sc
, DID_BUS_BUSY
);
181 case VIRTIO_SCSI_S_TRANSPORT_FAILURE
:
182 set_host_byte(sc
, DID_TRANSPORT_DISRUPTED
);
184 case VIRTIO_SCSI_S_TARGET_FAILURE
:
185 set_host_byte(sc
, DID_TARGET_FAILURE
);
187 case VIRTIO_SCSI_S_NEXUS_FAILURE
:
188 set_host_byte(sc
, DID_NEXUS_FAILURE
);
191 scmd_printk(KERN_WARNING
, sc
, "Unknown response %d",
194 case VIRTIO_SCSI_S_FAILURE
:
195 set_host_byte(sc
, DID_ERROR
);
199 WARN_ON(virtio32_to_cpu(vscsi
->vdev
, resp
->sense_len
) >
200 VIRTIO_SCSI_SENSE_SIZE
);
201 if (sc
->sense_buffer
) {
202 memcpy(sc
->sense_buffer
, resp
->sense
,
204 virtio32_to_cpu(vscsi
->vdev
, resp
->sense_len
),
205 VIRTIO_SCSI_SENSE_SIZE
));
207 set_driver_byte(sc
, DRIVER_SENSE
);
212 atomic_dec(&tgt
->reqs
);
215 static void virtscsi_vq_done(struct virtio_scsi
*vscsi
,
216 struct virtio_scsi_vq
*virtscsi_vq
,
217 void (*fn
)(struct virtio_scsi
*vscsi
, void *buf
))
222 struct virtqueue
*vq
= virtscsi_vq
->vq
;
224 spin_lock_irqsave(&virtscsi_vq
->vq_lock
, flags
);
226 virtqueue_disable_cb(vq
);
227 while ((buf
= virtqueue_get_buf(vq
, &len
)) != NULL
)
230 if (unlikely(virtqueue_is_broken(vq
)))
232 } while (!virtqueue_enable_cb(vq
));
233 spin_unlock_irqrestore(&virtscsi_vq
->vq_lock
, flags
);
236 static void virtscsi_req_done(struct virtqueue
*vq
)
238 struct Scsi_Host
*sh
= virtio_scsi_host(vq
->vdev
);
239 struct virtio_scsi
*vscsi
= shost_priv(sh
);
240 int index
= vq
->index
- VIRTIO_SCSI_VQ_BASE
;
241 struct virtio_scsi_vq
*req_vq
= &vscsi
->req_vqs
[index
];
243 virtscsi_vq_done(vscsi
, req_vq
, virtscsi_complete_cmd
);
246 static void virtscsi_poll_requests(struct virtio_scsi
*vscsi
)
250 num_vqs
= vscsi
->num_queues
;
251 for (i
= 0; i
< num_vqs
; i
++)
252 virtscsi_vq_done(vscsi
, &vscsi
->req_vqs
[i
],
253 virtscsi_complete_cmd
);
256 static void virtscsi_complete_free(struct virtio_scsi
*vscsi
, void *buf
)
258 struct virtio_scsi_cmd
*cmd
= buf
;
261 complete_all(cmd
->comp
);
264 static void virtscsi_ctrl_done(struct virtqueue
*vq
)
266 struct Scsi_Host
*sh
= virtio_scsi_host(vq
->vdev
);
267 struct virtio_scsi
*vscsi
= shost_priv(sh
);
269 virtscsi_vq_done(vscsi
, &vscsi
->ctrl_vq
, virtscsi_complete_free
);
272 static void virtscsi_handle_event(struct work_struct
*work
);
274 static int virtscsi_kick_event(struct virtio_scsi
*vscsi
,
275 struct virtio_scsi_event_node
*event_node
)
278 struct scatterlist sg
;
281 INIT_WORK(&event_node
->work
, virtscsi_handle_event
);
282 sg_init_one(&sg
, &event_node
->event
, sizeof(struct virtio_scsi_event
));
284 spin_lock_irqsave(&vscsi
->event_vq
.vq_lock
, flags
);
286 err
= virtqueue_add_inbuf(vscsi
->event_vq
.vq
, &sg
, 1, event_node
,
289 virtqueue_kick(vscsi
->event_vq
.vq
);
291 spin_unlock_irqrestore(&vscsi
->event_vq
.vq_lock
, flags
);
296 static int virtscsi_kick_event_all(struct virtio_scsi
*vscsi
)
300 for (i
= 0; i
< VIRTIO_SCSI_EVENT_LEN
; i
++) {
301 vscsi
->event_list
[i
].vscsi
= vscsi
;
302 virtscsi_kick_event(vscsi
, &vscsi
->event_list
[i
]);
308 static void virtscsi_cancel_event_work(struct virtio_scsi
*vscsi
)
312 /* Stop scheduling work before calling cancel_work_sync. */
313 spin_lock_irq(&vscsi
->event_vq
.vq_lock
);
314 vscsi
->stop_events
= true;
315 spin_unlock_irq(&vscsi
->event_vq
.vq_lock
);
317 for (i
= 0; i
< VIRTIO_SCSI_EVENT_LEN
; i
++)
318 cancel_work_sync(&vscsi
->event_list
[i
].work
);
321 static void virtscsi_handle_transport_reset(struct virtio_scsi
*vscsi
,
322 struct virtio_scsi_event
*event
)
324 struct scsi_device
*sdev
;
325 struct Scsi_Host
*shost
= virtio_scsi_host(vscsi
->vdev
);
326 unsigned int target
= event
->lun
[1];
327 unsigned int lun
= (event
->lun
[2] << 8) | event
->lun
[3];
329 switch (virtio32_to_cpu(vscsi
->vdev
, event
->reason
)) {
330 case VIRTIO_SCSI_EVT_RESET_RESCAN
:
331 scsi_add_device(shost
, 0, target
, lun
);
333 case VIRTIO_SCSI_EVT_RESET_REMOVED
:
334 sdev
= scsi_device_lookup(shost
, 0, target
, lun
);
336 scsi_remove_device(sdev
);
337 scsi_device_put(sdev
);
339 pr_err("SCSI device %d 0 %d %d not found\n",
340 shost
->host_no
, target
, lun
);
344 pr_info("Unsupport virtio scsi event reason %x\n", event
->reason
);
348 static void virtscsi_handle_param_change(struct virtio_scsi
*vscsi
,
349 struct virtio_scsi_event
*event
)
351 struct scsi_device
*sdev
;
352 struct Scsi_Host
*shost
= virtio_scsi_host(vscsi
->vdev
);
353 unsigned int target
= event
->lun
[1];
354 unsigned int lun
= (event
->lun
[2] << 8) | event
->lun
[3];
355 u8 asc
= virtio32_to_cpu(vscsi
->vdev
, event
->reason
) & 255;
356 u8 ascq
= virtio32_to_cpu(vscsi
->vdev
, event
->reason
) >> 8;
358 sdev
= scsi_device_lookup(shost
, 0, target
, lun
);
360 pr_err("SCSI device %d 0 %d %d not found\n",
361 shost
->host_no
, target
, lun
);
365 /* Handle "Parameters changed", "Mode parameters changed", and
366 "Capacity data has changed". */
367 if (asc
== 0x2a && (ascq
== 0x00 || ascq
== 0x01 || ascq
== 0x09))
368 scsi_rescan_device(&sdev
->sdev_gendev
);
370 scsi_device_put(sdev
);
373 static void virtscsi_handle_event(struct work_struct
*work
)
375 struct virtio_scsi_event_node
*event_node
=
376 container_of(work
, struct virtio_scsi_event_node
, work
);
377 struct virtio_scsi
*vscsi
= event_node
->vscsi
;
378 struct virtio_scsi_event
*event
= &event_node
->event
;
381 cpu_to_virtio32(vscsi
->vdev
, VIRTIO_SCSI_T_EVENTS_MISSED
)) {
382 event
->event
&= ~cpu_to_virtio32(vscsi
->vdev
,
383 VIRTIO_SCSI_T_EVENTS_MISSED
);
384 scsi_scan_host(virtio_scsi_host(vscsi
->vdev
));
387 switch (virtio32_to_cpu(vscsi
->vdev
, event
->event
)) {
388 case VIRTIO_SCSI_T_NO_EVENT
:
390 case VIRTIO_SCSI_T_TRANSPORT_RESET
:
391 virtscsi_handle_transport_reset(vscsi
, event
);
393 case VIRTIO_SCSI_T_PARAM_CHANGE
:
394 virtscsi_handle_param_change(vscsi
, event
);
397 pr_err("Unsupport virtio scsi event %x\n", event
->event
);
399 virtscsi_kick_event(vscsi
, event_node
);
402 static void virtscsi_complete_event(struct virtio_scsi
*vscsi
, void *buf
)
404 struct virtio_scsi_event_node
*event_node
= buf
;
406 if (!vscsi
->stop_events
)
407 queue_work(system_freezable_wq
, &event_node
->work
);
410 static void virtscsi_event_done(struct virtqueue
*vq
)
412 struct Scsi_Host
*sh
= virtio_scsi_host(vq
->vdev
);
413 struct virtio_scsi
*vscsi
= shost_priv(sh
);
415 virtscsi_vq_done(vscsi
, &vscsi
->event_vq
, virtscsi_complete_event
);
419 * virtscsi_add_cmd - add a virtio_scsi_cmd to a virtqueue
420 * @vq : the struct virtqueue we're talking about
421 * @cmd : command structure
422 * @req_size : size of the request buffer
423 * @resp_size : size of the response buffer
425 static int virtscsi_add_cmd(struct virtqueue
*vq
,
426 struct virtio_scsi_cmd
*cmd
,
427 size_t req_size
, size_t resp_size
)
429 struct scsi_cmnd
*sc
= cmd
->sc
;
430 struct scatterlist
*sgs
[6], req
, resp
;
431 struct sg_table
*out
, *in
;
432 unsigned out_num
= 0, in_num
= 0;
436 if (sc
&& sc
->sc_data_direction
!= DMA_NONE
) {
437 if (sc
->sc_data_direction
!= DMA_FROM_DEVICE
)
438 out
= &scsi_out(sc
)->table
;
439 if (sc
->sc_data_direction
!= DMA_TO_DEVICE
)
440 in
= &scsi_in(sc
)->table
;
443 /* Request header. */
444 sg_init_one(&req
, &cmd
->req
, req_size
);
445 sgs
[out_num
++] = &req
;
447 /* Data-out buffer. */
449 /* Place WRITE protection SGLs before Data OUT payload */
450 if (scsi_prot_sg_count(sc
))
451 sgs
[out_num
++] = scsi_prot_sglist(sc
);
452 sgs
[out_num
++] = out
->sgl
;
455 /* Response header. */
456 sg_init_one(&resp
, &cmd
->resp
, resp_size
);
457 sgs
[out_num
+ in_num
++] = &resp
;
461 /* Place READ protection SGLs before Data IN payload */
462 if (scsi_prot_sg_count(sc
))
463 sgs
[out_num
+ in_num
++] = scsi_prot_sglist(sc
);
464 sgs
[out_num
+ in_num
++] = in
->sgl
;
467 return virtqueue_add_sgs(vq
, sgs
, out_num
, in_num
, cmd
, GFP_ATOMIC
);
470 static int virtscsi_kick_cmd(struct virtio_scsi_vq
*vq
,
471 struct virtio_scsi_cmd
*cmd
,
472 size_t req_size
, size_t resp_size
)
476 bool needs_kick
= false;
478 spin_lock_irqsave(&vq
->vq_lock
, flags
);
479 err
= virtscsi_add_cmd(vq
->vq
, cmd
, req_size
, resp_size
);
481 needs_kick
= virtqueue_kick_prepare(vq
->vq
);
483 spin_unlock_irqrestore(&vq
->vq_lock
, flags
);
486 virtqueue_notify(vq
->vq
);
490 static void virtio_scsi_init_hdr(struct virtio_device
*vdev
,
491 struct virtio_scsi_cmd_req
*cmd
,
492 struct scsi_cmnd
*sc
)
495 cmd
->lun
[1] = sc
->device
->id
;
496 cmd
->lun
[2] = (sc
->device
->lun
>> 8) | 0x40;
497 cmd
->lun
[3] = sc
->device
->lun
& 0xff;
498 cmd
->tag
= cpu_to_virtio64(vdev
, (unsigned long)sc
);
499 cmd
->task_attr
= VIRTIO_SCSI_S_SIMPLE
;
504 static void virtio_scsi_init_hdr_pi(struct virtio_device
*vdev
,
505 struct virtio_scsi_cmd_req_pi
*cmd_pi
,
506 struct scsi_cmnd
*sc
)
508 struct request
*rq
= sc
->request
;
509 struct blk_integrity
*bi
;
511 virtio_scsi_init_hdr(vdev
, (struct virtio_scsi_cmd_req
*)cmd_pi
, sc
);
513 if (!rq
|| !scsi_prot_sg_count(sc
))
516 bi
= blk_get_integrity(rq
->rq_disk
);
518 if (sc
->sc_data_direction
== DMA_TO_DEVICE
)
519 cmd_pi
->pi_bytesout
= cpu_to_virtio32(vdev
,
522 else if (sc
->sc_data_direction
== DMA_FROM_DEVICE
)
523 cmd_pi
->pi_bytesin
= cpu_to_virtio32(vdev
,
528 static int virtscsi_queuecommand(struct virtio_scsi
*vscsi
,
529 struct virtio_scsi_vq
*req_vq
,
530 struct scsi_cmnd
*sc
)
532 struct Scsi_Host
*shost
= virtio_scsi_host(vscsi
->vdev
);
533 struct virtio_scsi_cmd
*cmd
= scsi_cmd_priv(sc
);
536 BUG_ON(scsi_sg_count(sc
) > shost
->sg_tablesize
);
538 /* TODO: check feature bit and fail if unsupported? */
539 BUG_ON(sc
->sc_data_direction
== DMA_BIDIRECTIONAL
);
541 dev_dbg(&sc
->device
->sdev_gendev
,
542 "cmd %p CDB: %#02x\n", sc
, sc
->cmnd
[0]);
544 memset(cmd
, 0, sizeof(*cmd
));
547 BUG_ON(sc
->cmd_len
> VIRTIO_SCSI_CDB_SIZE
);
549 if (virtio_has_feature(vscsi
->vdev
, VIRTIO_SCSI_F_T10_PI
)) {
550 virtio_scsi_init_hdr_pi(vscsi
->vdev
, &cmd
->req
.cmd_pi
, sc
);
551 memcpy(cmd
->req
.cmd_pi
.cdb
, sc
->cmnd
, sc
->cmd_len
);
552 req_size
= sizeof(cmd
->req
.cmd_pi
);
554 virtio_scsi_init_hdr(vscsi
->vdev
, &cmd
->req
.cmd
, sc
);
555 memcpy(cmd
->req
.cmd
.cdb
, sc
->cmnd
, sc
->cmd_len
);
556 req_size
= sizeof(cmd
->req
.cmd
);
559 if (virtscsi_kick_cmd(req_vq
, cmd
, req_size
, sizeof(cmd
->resp
.cmd
)) != 0)
560 return SCSI_MLQUEUE_HOST_BUSY
;
564 static int virtscsi_queuecommand_single(struct Scsi_Host
*sh
,
565 struct scsi_cmnd
*sc
)
567 struct virtio_scsi
*vscsi
= shost_priv(sh
);
568 struct virtio_scsi_target_state
*tgt
=
569 scsi_target(sc
->device
)->hostdata
;
571 atomic_inc(&tgt
->reqs
);
572 return virtscsi_queuecommand(vscsi
, &vscsi
->req_vqs
[0], sc
);
575 static struct virtio_scsi_vq
*virtscsi_pick_vq_mq(struct virtio_scsi
*vscsi
,
576 struct scsi_cmnd
*sc
)
578 u32 tag
= blk_mq_unique_tag(sc
->request
);
579 u16 hwq
= blk_mq_unique_tag_to_hwq(tag
);
581 return &vscsi
->req_vqs
[hwq
];
584 static struct virtio_scsi_vq
*virtscsi_pick_vq(struct virtio_scsi
*vscsi
,
585 struct virtio_scsi_target_state
*tgt
)
587 struct virtio_scsi_vq
*vq
;
591 local_irq_save(flags
);
592 if (atomic_inc_return(&tgt
->reqs
) > 1) {
596 seq
= read_seqcount_begin(&tgt
->tgt_seq
);
598 } while (read_seqcount_retry(&tgt
->tgt_seq
, seq
));
600 /* no writes can be concurrent because of atomic_t */
601 write_seqcount_begin(&tgt
->tgt_seq
);
603 /* keep previous req_vq if a reader just arrived */
604 if (unlikely(atomic_read(&tgt
->reqs
) > 1)) {
609 queue_num
= smp_processor_id();
610 while (unlikely(queue_num
>= vscsi
->num_queues
))
611 queue_num
-= vscsi
->num_queues
;
612 tgt
->req_vq
= vq
= &vscsi
->req_vqs
[queue_num
];
614 write_seqcount_end(&tgt
->tgt_seq
);
616 local_irq_restore(flags
);
621 static int virtscsi_queuecommand_multi(struct Scsi_Host
*sh
,
622 struct scsi_cmnd
*sc
)
624 struct virtio_scsi
*vscsi
= shost_priv(sh
);
625 struct virtio_scsi_target_state
*tgt
=
626 scsi_target(sc
->device
)->hostdata
;
627 struct virtio_scsi_vq
*req_vq
;
629 if (shost_use_blk_mq(sh
))
630 req_vq
= virtscsi_pick_vq_mq(vscsi
, sc
);
632 req_vq
= virtscsi_pick_vq(vscsi
, tgt
);
634 return virtscsi_queuecommand(vscsi
, req_vq
, sc
);
637 static int virtscsi_tmf(struct virtio_scsi
*vscsi
, struct virtio_scsi_cmd
*cmd
)
639 DECLARE_COMPLETION_ONSTACK(comp
);
643 if (virtscsi_kick_cmd(&vscsi
->ctrl_vq
, cmd
,
644 sizeof cmd
->req
.tmf
, sizeof cmd
->resp
.tmf
) < 0)
647 wait_for_completion(&comp
);
648 if (cmd
->resp
.tmf
.response
== VIRTIO_SCSI_S_OK
||
649 cmd
->resp
.tmf
.response
== VIRTIO_SCSI_S_FUNCTION_SUCCEEDED
)
653 * The spec guarantees that all requests related to the TMF have
654 * been completed, but the callback might not have run yet if
655 * we're using independent interrupts (e.g. MSI). Poll the
658 * In the abort case, sc->scsi_done will do nothing, because
659 * the block layer must have detected a timeout and as a result
660 * REQ_ATOM_COMPLETE has been set.
662 virtscsi_poll_requests(vscsi
);
665 mempool_free(cmd
, virtscsi_cmd_pool
);
669 static int virtscsi_device_reset(struct scsi_cmnd
*sc
)
671 struct virtio_scsi
*vscsi
= shost_priv(sc
->device
->host
);
672 struct virtio_scsi_cmd
*cmd
;
674 sdev_printk(KERN_INFO
, sc
->device
, "device reset\n");
675 cmd
= mempool_alloc(virtscsi_cmd_pool
, GFP_NOIO
);
679 memset(cmd
, 0, sizeof(*cmd
));
681 cmd
->req
.tmf
= (struct virtio_scsi_ctrl_tmf_req
){
682 .type
= VIRTIO_SCSI_T_TMF
,
683 .subtype
= cpu_to_virtio32(vscsi
->vdev
,
684 VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET
),
686 .lun
[1] = sc
->device
->id
,
687 .lun
[2] = (sc
->device
->lun
>> 8) | 0x40,
688 .lun
[3] = sc
->device
->lun
& 0xff,
690 return virtscsi_tmf(vscsi
, cmd
);
694 * virtscsi_change_queue_depth() - Change a virtscsi target's queue depth
695 * @sdev: Virtscsi target whose queue depth to change
696 * @qdepth: New queue depth
698 static int virtscsi_change_queue_depth(struct scsi_device
*sdev
, int qdepth
)
700 struct Scsi_Host
*shost
= sdev
->host
;
701 int max_depth
= shost
->cmd_per_lun
;
703 return scsi_change_queue_depth(sdev
, min(max_depth
, qdepth
));
706 static int virtscsi_abort(struct scsi_cmnd
*sc
)
708 struct virtio_scsi
*vscsi
= shost_priv(sc
->device
->host
);
709 struct virtio_scsi_cmd
*cmd
;
711 scmd_printk(KERN_INFO
, sc
, "abort\n");
712 cmd
= mempool_alloc(virtscsi_cmd_pool
, GFP_NOIO
);
716 memset(cmd
, 0, sizeof(*cmd
));
718 cmd
->req
.tmf
= (struct virtio_scsi_ctrl_tmf_req
){
719 .type
= VIRTIO_SCSI_T_TMF
,
720 .subtype
= VIRTIO_SCSI_T_TMF_ABORT_TASK
,
722 .lun
[1] = sc
->device
->id
,
723 .lun
[2] = (sc
->device
->lun
>> 8) | 0x40,
724 .lun
[3] = sc
->device
->lun
& 0xff,
725 .tag
= cpu_to_virtio64(vscsi
->vdev
, (unsigned long)sc
),
727 return virtscsi_tmf(vscsi
, cmd
);
730 static int virtscsi_target_alloc(struct scsi_target
*starget
)
732 struct Scsi_Host
*sh
= dev_to_shost(starget
->dev
.parent
);
733 struct virtio_scsi
*vscsi
= shost_priv(sh
);
735 struct virtio_scsi_target_state
*tgt
=
736 kmalloc(sizeof(*tgt
), GFP_KERNEL
);
740 seqcount_init(&tgt
->tgt_seq
);
741 atomic_set(&tgt
->reqs
, 0);
742 tgt
->req_vq
= &vscsi
->req_vqs
[0];
744 starget
->hostdata
= tgt
;
748 static void virtscsi_target_destroy(struct scsi_target
*starget
)
750 struct virtio_scsi_target_state
*tgt
= starget
->hostdata
;
754 static struct scsi_host_template virtscsi_host_template_single
= {
755 .module
= THIS_MODULE
,
756 .name
= "Virtio SCSI HBA",
757 .proc_name
= "virtio_scsi",
759 .cmd_size
= sizeof(struct virtio_scsi_cmd
),
760 .queuecommand
= virtscsi_queuecommand_single
,
761 .change_queue_depth
= virtscsi_change_queue_depth
,
762 .eh_abort_handler
= virtscsi_abort
,
763 .eh_device_reset_handler
= virtscsi_device_reset
,
766 .dma_boundary
= UINT_MAX
,
767 .use_clustering
= ENABLE_CLUSTERING
,
768 .target_alloc
= virtscsi_target_alloc
,
769 .target_destroy
= virtscsi_target_destroy
,
770 .track_queue_depth
= 1,
773 static struct scsi_host_template virtscsi_host_template_multi
= {
774 .module
= THIS_MODULE
,
775 .name
= "Virtio SCSI HBA",
776 .proc_name
= "virtio_scsi",
778 .cmd_size
= sizeof(struct virtio_scsi_cmd
),
779 .queuecommand
= virtscsi_queuecommand_multi
,
780 .change_queue_depth
= virtscsi_change_queue_depth
,
781 .eh_abort_handler
= virtscsi_abort
,
782 .eh_device_reset_handler
= virtscsi_device_reset
,
785 .dma_boundary
= UINT_MAX
,
786 .use_clustering
= ENABLE_CLUSTERING
,
787 .target_alloc
= virtscsi_target_alloc
,
788 .target_destroy
= virtscsi_target_destroy
,
789 .track_queue_depth
= 1,
792 #define virtscsi_config_get(vdev, fld) \
794 typeof(((struct virtio_scsi_config *)0)->fld) __val; \
795 virtio_cread(vdev, struct virtio_scsi_config, fld, &__val); \
799 #define virtscsi_config_set(vdev, fld, val) \
801 typeof(((struct virtio_scsi_config *)0)->fld) __val = (val); \
802 virtio_cwrite(vdev, struct virtio_scsi_config, fld, &__val); \
805 static void __virtscsi_set_affinity(struct virtio_scsi
*vscsi
, bool affinity
)
810 /* In multiqueue mode, when the number of cpu is equal
811 * to the number of request queues, we let the qeueues
812 * to be private to one cpu by setting the affinity hint
813 * to eliminate the contention.
815 if ((vscsi
->num_queues
== 1 ||
816 vscsi
->num_queues
!= num_online_cpus()) && affinity
) {
817 if (vscsi
->affinity_hint_set
)
825 for_each_online_cpu(cpu
) {
826 virtqueue_set_affinity(vscsi
->req_vqs
[i
].vq
, cpu
);
830 vscsi
->affinity_hint_set
= true;
832 for (i
= 0; i
< vscsi
->num_queues
; i
++) {
833 if (!vscsi
->req_vqs
[i
].vq
)
836 virtqueue_set_affinity(vscsi
->req_vqs
[i
].vq
, -1);
839 vscsi
->affinity_hint_set
= false;
843 static void virtscsi_set_affinity(struct virtio_scsi
*vscsi
, bool affinity
)
846 __virtscsi_set_affinity(vscsi
, affinity
);
850 static int virtscsi_cpu_callback(struct notifier_block
*nfb
,
851 unsigned long action
, void *hcpu
)
853 struct virtio_scsi
*vscsi
= container_of(nfb
, struct virtio_scsi
, nb
);
856 case CPU_ONLINE_FROZEN
:
858 case CPU_DEAD_FROZEN
:
859 __virtscsi_set_affinity(vscsi
, true);
867 static void virtscsi_init_vq(struct virtio_scsi_vq
*virtscsi_vq
,
868 struct virtqueue
*vq
)
870 spin_lock_init(&virtscsi_vq
->vq_lock
);
871 virtscsi_vq
->vq
= vq
;
874 static void virtscsi_remove_vqs(struct virtio_device
*vdev
)
876 struct Scsi_Host
*sh
= virtio_scsi_host(vdev
);
877 struct virtio_scsi
*vscsi
= shost_priv(sh
);
879 virtscsi_set_affinity(vscsi
, false);
881 /* Stop all the virtqueues. */
882 vdev
->config
->reset(vdev
);
884 vdev
->config
->del_vqs(vdev
);
887 static int virtscsi_init(struct virtio_device
*vdev
,
888 struct virtio_scsi
*vscsi
)
893 vq_callback_t
**callbacks
;
895 struct virtqueue
**vqs
;
897 num_vqs
= vscsi
->num_queues
+ VIRTIO_SCSI_VQ_BASE
;
898 vqs
= kmalloc(num_vqs
* sizeof(struct virtqueue
*), GFP_KERNEL
);
899 callbacks
= kmalloc(num_vqs
* sizeof(vq_callback_t
*), GFP_KERNEL
);
900 names
= kmalloc(num_vqs
* sizeof(char *), GFP_KERNEL
);
902 if (!callbacks
|| !vqs
|| !names
) {
907 callbacks
[0] = virtscsi_ctrl_done
;
908 callbacks
[1] = virtscsi_event_done
;
909 names
[0] = "control";
911 for (i
= VIRTIO_SCSI_VQ_BASE
; i
< num_vqs
; i
++) {
912 callbacks
[i
] = virtscsi_req_done
;
913 names
[i
] = "request";
916 /* Discover virtqueues and write information to configuration. */
917 err
= vdev
->config
->find_vqs(vdev
, num_vqs
, vqs
, callbacks
, names
);
921 virtscsi_init_vq(&vscsi
->ctrl_vq
, vqs
[0]);
922 virtscsi_init_vq(&vscsi
->event_vq
, vqs
[1]);
923 for (i
= VIRTIO_SCSI_VQ_BASE
; i
< num_vqs
; i
++)
924 virtscsi_init_vq(&vscsi
->req_vqs
[i
- VIRTIO_SCSI_VQ_BASE
],
927 virtscsi_set_affinity(vscsi
, true);
929 virtscsi_config_set(vdev
, cdb_size
, VIRTIO_SCSI_CDB_SIZE
);
930 virtscsi_config_set(vdev
, sense_size
, VIRTIO_SCSI_SENSE_SIZE
);
939 virtscsi_remove_vqs(vdev
);
943 static int virtscsi_probe(struct virtio_device
*vdev
)
945 struct Scsi_Host
*shost
;
946 struct virtio_scsi
*vscsi
;
948 u32 sg_elems
, num_targets
;
951 struct scsi_host_template
*hostt
;
953 if (!vdev
->config
->get
) {
954 dev_err(&vdev
->dev
, "%s failure: config access disabled\n",
959 /* We need to know how many queues before we allocate. */
960 num_queues
= virtscsi_config_get(vdev
, num_queues
) ? : 1;
962 num_targets
= virtscsi_config_get(vdev
, max_target
) + 1;
965 hostt
= &virtscsi_host_template_single
;
967 hostt
= &virtscsi_host_template_multi
;
969 shost
= scsi_host_alloc(hostt
,
970 sizeof(*vscsi
) + sizeof(vscsi
->req_vqs
[0]) * num_queues
);
974 sg_elems
= virtscsi_config_get(vdev
, seg_max
) ?: 1;
975 shost
->sg_tablesize
= sg_elems
;
976 vscsi
= shost_priv(shost
);
978 vscsi
->num_queues
= num_queues
;
981 err
= virtscsi_init(vdev
, vscsi
);
983 goto virtscsi_init_failed
;
985 vscsi
->nb
.notifier_call
= &virtscsi_cpu_callback
;
986 err
= register_hotcpu_notifier(&vscsi
->nb
);
988 pr_err("registering cpu notifier failed\n");
989 goto scsi_add_host_failed
;
992 cmd_per_lun
= virtscsi_config_get(vdev
, cmd_per_lun
) ?: 1;
993 shost
->cmd_per_lun
= min_t(u32
, cmd_per_lun
, shost
->can_queue
);
994 shost
->max_sectors
= virtscsi_config_get(vdev
, max_sectors
) ?: 0xFFFF;
996 /* LUNs > 256 are reported with format 1, so they go in the range
999 shost
->max_lun
= virtscsi_config_get(vdev
, max_lun
) + 1 + 0x4000;
1000 shost
->max_id
= num_targets
;
1001 shost
->max_channel
= 0;
1002 shost
->max_cmd_len
= VIRTIO_SCSI_CDB_SIZE
;
1003 shost
->nr_hw_queues
= num_queues
;
1005 if (virtio_has_feature(vdev
, VIRTIO_SCSI_F_T10_PI
)) {
1006 host_prot
= SHOST_DIF_TYPE1_PROTECTION
| SHOST_DIF_TYPE2_PROTECTION
|
1007 SHOST_DIF_TYPE3_PROTECTION
| SHOST_DIX_TYPE1_PROTECTION
|
1008 SHOST_DIX_TYPE2_PROTECTION
| SHOST_DIX_TYPE3_PROTECTION
;
1010 scsi_host_set_prot(shost
, host_prot
);
1011 scsi_host_set_guard(shost
, SHOST_DIX_GUARD_CRC
);
1014 err
= scsi_add_host(shost
, &vdev
->dev
);
1016 goto scsi_add_host_failed
;
1018 virtio_device_ready(vdev
);
1020 if (virtio_has_feature(vdev
, VIRTIO_SCSI_F_HOTPLUG
))
1021 virtscsi_kick_event_all(vscsi
);
1023 scsi_scan_host(shost
);
1026 scsi_add_host_failed
:
1027 vdev
->config
->del_vqs(vdev
);
1028 virtscsi_init_failed
:
1029 scsi_host_put(shost
);
1033 static void virtscsi_remove(struct virtio_device
*vdev
)
1035 struct Scsi_Host
*shost
= virtio_scsi_host(vdev
);
1036 struct virtio_scsi
*vscsi
= shost_priv(shost
);
1038 if (virtio_has_feature(vdev
, VIRTIO_SCSI_F_HOTPLUG
))
1039 virtscsi_cancel_event_work(vscsi
);
1041 scsi_remove_host(shost
);
1043 unregister_hotcpu_notifier(&vscsi
->nb
);
1045 virtscsi_remove_vqs(vdev
);
1046 scsi_host_put(shost
);
1049 #ifdef CONFIG_PM_SLEEP
1050 static int virtscsi_freeze(struct virtio_device
*vdev
)
1052 struct Scsi_Host
*sh
= virtio_scsi_host(vdev
);
1053 struct virtio_scsi
*vscsi
= shost_priv(sh
);
1055 unregister_hotcpu_notifier(&vscsi
->nb
);
1056 virtscsi_remove_vqs(vdev
);
1060 static int virtscsi_restore(struct virtio_device
*vdev
)
1062 struct Scsi_Host
*sh
= virtio_scsi_host(vdev
);
1063 struct virtio_scsi
*vscsi
= shost_priv(sh
);
1066 err
= virtscsi_init(vdev
, vscsi
);
1070 err
= register_hotcpu_notifier(&vscsi
->nb
);
1072 vdev
->config
->del_vqs(vdev
);
1076 virtio_device_ready(vdev
);
1078 if (virtio_has_feature(vdev
, VIRTIO_SCSI_F_HOTPLUG
))
1079 virtscsi_kick_event_all(vscsi
);
1085 static struct virtio_device_id id_table
[] = {
1086 { VIRTIO_ID_SCSI
, VIRTIO_DEV_ANY_ID
},
1090 static unsigned int features
[] = {
1091 VIRTIO_SCSI_F_HOTPLUG
,
1092 VIRTIO_SCSI_F_CHANGE
,
1093 VIRTIO_SCSI_F_T10_PI
,
1096 static struct virtio_driver virtio_scsi_driver
= {
1097 .feature_table
= features
,
1098 .feature_table_size
= ARRAY_SIZE(features
),
1099 .driver
.name
= KBUILD_MODNAME
,
1100 .driver
.owner
= THIS_MODULE
,
1101 .id_table
= id_table
,
1102 .probe
= virtscsi_probe
,
1103 #ifdef CONFIG_PM_SLEEP
1104 .freeze
= virtscsi_freeze
,
1105 .restore
= virtscsi_restore
,
1107 .remove
= virtscsi_remove
,
1110 static int __init
init(void)
1114 virtscsi_cmd_cache
= KMEM_CACHE(virtio_scsi_cmd
, 0);
1115 if (!virtscsi_cmd_cache
) {
1116 pr_err("kmem_cache_create() for virtscsi_cmd_cache failed\n");
1122 mempool_create_slab_pool(VIRTIO_SCSI_MEMPOOL_SZ
,
1123 virtscsi_cmd_cache
);
1124 if (!virtscsi_cmd_pool
) {
1125 pr_err("mempool_create() for virtscsi_cmd_pool failed\n");
1128 ret
= register_virtio_driver(&virtio_scsi_driver
);
1135 if (virtscsi_cmd_pool
) {
1136 mempool_destroy(virtscsi_cmd_pool
);
1137 virtscsi_cmd_pool
= NULL
;
1139 if (virtscsi_cmd_cache
) {
1140 kmem_cache_destroy(virtscsi_cmd_cache
);
1141 virtscsi_cmd_cache
= NULL
;
1146 static void __exit
fini(void)
1148 unregister_virtio_driver(&virtio_scsi_driver
);
1149 mempool_destroy(virtscsi_cmd_pool
);
1150 kmem_cache_destroy(virtscsi_cmd_cache
);
1155 MODULE_DEVICE_TABLE(virtio
, id_table
);
1156 MODULE_DESCRIPTION("Virtio SCSI HBA driver");
1157 MODULE_LICENSE("GPL");