drivers/usb/chipidea/host.c

   1 /*
   2  * host.c - ChipIdea USB host controller driver
   3  *
   4  * Copyright (c) 2012 Intel Corporation
   5  *
   6  * Author: Alexander Shishkin
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20  */
  21
  22 #include <linux/kernel.h>
  23 #include <linux/io.h>
  24 #include <linux/usb.h>
  25 #include <linux/usb/hcd.h>
  26 #include <linux/usb/chipidea.h>
  27 #include <linux/regulator/consumer.h>
  28
  29 #include "../host/ehci.h"
  30
  31 #include "ci.h"
  32 #include "bits.h"
  33 #include "host.h"
  34
  35 static struct hc_driver __read_mostly ci_ehci_hc_driver;
  36 static int (*orig_bus_suspend)(struct usb_hcd *hcd);
  37
  38 struct ehci_ci_priv {
  39         struct regulator *reg_vbus;
  40 };
  41
  42 static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
  43 {
  44         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
  45         struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
  46         struct device *dev = hcd->self.controller;
  47         struct ci_hdrc *ci = dev_get_drvdata(dev);
  48         int ret = 0;
  49         int port = HCS_N_PORTS(ehci->hcs_params);
  50
  51         if (priv->reg_vbus) {
  52                 if (port > 1) {
  53                         dev_warn(dev,
  54                                 "Not support multi-port regulator control\n");
  55                         return 0;
  56                 }
  57                 if (enable)
  58                         ret = regulator_enable(priv->reg_vbus);
  59                 else
  60                         ret = regulator_disable(priv->reg_vbus);
  61                 if (ret) {
  62                         dev_err(dev,
  63                                 "Failed to %s vbus regulator, ret=%d\n",
  64                                 enable ? "enable" : "disable", ret);
  65                         return ret;
  66                 }
  67         }
  68
  69         if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
  70                 /*
  71                  * Marvell 28nm HSIC PHY requires forcing the port to HS mode.
  72                  * As HSIC is always HS, this should be safe for others.
  73                  */
  74                 hw_port_test_set(ci, 5);
  75                 hw_port_test_set(ci, 0);
  76         }
  77         return 0;
  78 };
  79
  80 static int ehci_ci_reset(struct usb_hcd *hcd)
  81 {
  82         struct device *dev = hcd->self.controller;
  83         struct ci_hdrc *ci = dev_get_drvdata(dev);
  84         int ret;
  85
  86         ret = ehci_setup(hcd);
  87         if (ret)
  88                 return ret;
  89
  90         ci_platform_configure(ci);
  91
  92         return ret;
  93 }
  94
  95 static const struct ehci_driver_overrides ehci_ci_overrides = {
  96         .extra_priv_size = sizeof(struct ehci_ci_priv),
  97         .port_power      = ehci_ci_portpower,
  98         .reset           = ehci_ci_reset,
  99 };
 100
 101 static irqreturn_t host_irq(struct ci_hdrc *ci)
 102 {
 103         return usb_hcd_irq(ci->irq, ci->hcd);
 104 }
 105
 106 static int host_start(struct ci_hdrc *ci)
 107 {
 108         struct usb_hcd *hcd;
 109         struct ehci_hcd *ehci;
 110         struct ehci_ci_priv *priv;
 111         int ret;
 112
 113         if (usb_disabled())
 114                 return -ENODEV;
 115
 116         hcd = usb_create_hcd(&ci_ehci_hc_driver, ci->dev, dev_name(ci->dev));
 117         if (!hcd)
 118                 return -ENOMEM;
 119
 120         dev_set_drvdata(ci->dev, ci);
 121         hcd->rsrc_start = ci->hw_bank.phys;
 122         hcd->rsrc_len = ci->hw_bank.size;
 123         hcd->regs = ci->hw_bank.abs;
 124         hcd->has_tt = 1;
 125
 126         hcd->power_budget = ci->platdata->power_budget;
 127         hcd->tpl_support = ci->platdata->tpl_support;
 128         if (ci->phy)
 129                 hcd->phy = ci->phy;
 130         else
 131                 hcd->usb_phy = ci->usb_phy;
 132
 133         ehci = hcd_to_ehci(hcd);
 134         ehci->caps = ci->hw_bank.cap;
 135         ehci->has_hostpc = ci->hw_bank.lpm;
 136         ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
 137         ehci->imx28_write_fix = ci->imx28_write_fix;
 138
 139         priv = (struct ehci_ci_priv *)ehci->priv;
 140         priv->reg_vbus = NULL;
 141
 142         if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
 143                 if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) {
 144                         ret = regulator_enable(ci->platdata->reg_vbus);
 145                         if (ret) {
 146                                 dev_err(ci->dev,
 147                                 "Failed to enable vbus regulator, ret=%d\n",
 148                                                                         ret);
 149                                 goto put_hcd;
 150                         }
 151                 } else {
 152                         priv->reg_vbus = ci->platdata->reg_vbus;
 153                 }
 154         }
 155
 156         ret = usb_add_hcd(hcd, 0, 0);
 157         if (ret) {
 158                 goto disable_reg;
 159         } else {
 160                 struct usb_otg *otg = &ci->otg;
 161
 162                 ci->hcd = hcd;
 163
 164                 if (ci_otg_is_fsm_mode(ci)) {
 165                         otg->host = &hcd->self;
 166                         hcd->self.otg_port = 1;
 167                 }
 168         }
 169
 170         return ret;
 171
 172 disable_reg:
 173         if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
 174                         (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
 175                 regulator_disable(ci->platdata->reg_vbus);
 176 put_hcd:
 177         usb_put_hcd(hcd);
 178
 179         return ret;
 180 }
 181
 182 static void host_stop(struct ci_hdrc *ci)
 183 {
 184         struct usb_hcd *hcd = ci->hcd;
 185
 186         if (hcd) {
 187                 usb_remove_hcd(hcd);
 188                 usb_put_hcd(hcd);
 189                 if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
 190                         (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
 191                                 regulator_disable(ci->platdata->reg_vbus);
 192         }
 193 }
 194
 195
 196 void ci_hdrc_host_destroy(struct ci_hdrc *ci)
 197 {
 198         if (ci->role == CI_ROLE_HOST && ci->hcd)
 199                 host_stop(ci);
 200 }
 201
 202 static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
 203 {
 204         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 205         int port;
 206         u32 tmp;
 207
 208         int ret = orig_bus_suspend(hcd);
 209
 210         if (ret)
 211                 return ret;
 212
 213         port = HCS_N_PORTS(ehci->hcs_params);
 214         while (port--) {
 215                 u32 __iomem *reg = &ehci->regs->port_status[port];
 216                 u32 portsc = ehci_readl(ehci, reg);
 217
 218                 if (portsc & PORT_CONNECT) {
 219                         /*
 220                          * For chipidea, the resume signal will be ended
 221                          * automatically, so for remote wakeup case, the
 222                          * usbcmd.rs may not be set before the resume has
 223                          * ended if other resume paths consumes too much
 224                          * time (~24ms), in that case, the SOF will not
 225                          * send out within 3ms after resume ends, then the
 226                          * high speed device will enter full speed mode.
 227                          */
 228
 229                         tmp = ehci_readl(ehci, &ehci->regs->command);
 230                         tmp |= CMD_RUN;
 231                         ehci_writel(ehci, tmp, &ehci->regs->command);
 232                         /*
 233                          * It needs a short delay between set RS bit and PHCD.
 234                          */
 235                         usleep_range(150, 200);
 236                         break;
 237                 }
 238         }
 239
 240         return 0;
 241 }
 242
 243 int ci_hdrc_host_init(struct ci_hdrc *ci)
 244 {
 245         struct ci_role_driver *rdrv;
 246
 247         if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC))
 248                 return -ENXIO;
 249
 250         rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
 251         if (!rdrv)
 252                 return -ENOMEM;
 253
 254         rdrv->start     = host_start;
 255         rdrv->stop      = host_stop;
 256         rdrv->irq       = host_irq;
 257         rdrv->name      = "host";
 258         ci->roles[CI_ROLE_HOST] = rdrv;
 259
 260         return 0;
 261 }
 262
 263 void ci_hdrc_host_driver_init(void)
 264 {
 265         ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
 266         orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
 267         ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
 268 }